iobroker.poolcontrol 1.3.15 → 1.3.17

package/lib/i18n/nl.json

@@ -288,6 +288,13 @@
   "pH mixing run finished. Pump was switched off by the pH helper.": "pH-mengloop beëindigd. De pomp is door de pH-helper uitgeschakeld.",
   "pH mixing run finished. Pump was not switched off because another helper is active.": "pH-mengloop beëindigd. De pomp is niet uitgeschakeld omdat een andere helper actief is.",
   "pH mixing run finished. Pump was already running and was not switched off by the pH helper.": "pH-mengloop beëindigd. De pomp draaide al en is niet door de pH-helper uitgeschakeld.",
+  "pH trend": "pH-trend",
+  "Overall pH status": "Algemene pH-status",
+  "pH is rising very quickly. Check dosing, alkalinity and water balance.": "De pH stijgt zeer snel. Controleer dosering, alkaliniteit en waterbalans.",
+  "pH is rising noticeably. Observe the trend and check alkalinity and water balance.": "De pH stijgt merkbaar. Observeer de trend en controleer alkaliniteit en waterbalans.",
+  "pH is slowly rising. Continue observing the trend.": "De pH stijgt langzaam. Blijf de trend observeren.",
+  "pH is falling. This can be plausible after pH correction or fresh water.": "De pH daalt. Dit kan plausibel zijn na een pH-correctie of toevoeging van vers water.",
+  "Not enough pH history is available yet. Collect more valid measurements.": "Er is nog niet genoeg pH-geschiedenis beschikbaar. Verzamel meer geldige metingen.",
 
   "No TDS source state configured.": "Geen TDS-bronstatus geconfigureerd.",
   "TDS source state configured.": "TDS-bronstatus geconfigureerd.",
@@ -317,5 +324,28 @@
   "not available": "niet beschikbaar",
   "Trend status": "Trendstatus",
   "Overall status": "Algemene status",
-  "Recommendation": "Aanbeveling"
+  "Recommendation": "Aanbeveling",
+  "No ORP source state configured.": "Geen ORP-bronstatus geconfigureerd.",
+  "ORP source state configured.": "ORP-bronstatus geconfigureerd.",
+  "ORP source state could not be subscribed.": "ORP-bronstatus kon niet worden geabonneerd.",
+  "ORP input is disabled.": "ORP-ingang is uitgeschakeld.",
+  "No valid ORP source is configured.": "Er is geen geldige ORP-bron geconfigureerd.",
+  "The configured ORP source state does not exist.": "De geconfigureerde ORP-bronstatus bestaat niet.",
+  "The configured ORP source could not be read.": "De geconfigureerde ORP-bron kon niet worden gelezen.",
+  "Unknown ORP source mode.": "Onbekende ORP-bronmodus.",
+  "Manual ORP value is used.": "Handmatige ORP-waarde wordt gebruikt.",
+  "External ORP source is valid.": "Externe ORP-bron is geldig.",
+  "The ORP value is invalid. Please check the measurement or sensor.": "De ORP-waarde is ongeldig. Controleer de meting of de sensor.",
+  "ORP evaluation is waiting for the pool pump because the sensor is in a measurement section.": "De ORP-evaluatie wacht op de zwembadpomp omdat de sensor zich in een meetsectie bevindt.",
+  "ORP evaluation is waiting until the measurement section has stabilized after pump start.": "De ORP-evaluatie wacht tot de meetsectie na het starten van de pomp is gestabiliseerd.",
+  "ORP trend": "ORP-trend",
+  "ORP value is available, but pH reference is missing, disabled or outside the expected range. ORP interpretation is limited.": "De ORP-waarde is beschikbaar, maar de pH-referentie ontbreekt, is uitgeschakeld of ligt buiten het verwachte bereik. De ORP-interpretatie is beperkt.",
+  "ORP value is low. Check pH and chlorine values manually and evaluate the water care situation.": "De ORP-waarde is laag. Controleer de pH- en chloorwaarden handmatig en beoordeel de waterverzorgingssituatie.",
+  "ORP value is high. Check whether the measurement is plausible and evaluate the water values together.": "De ORP-waarde is hoog. Controleer of de meting plausibel is en beoordeel de waterwaarden samen.",
+  "ORP value is within the configured reference range.": "De ORP-waarde ligt binnen het geconfigureerde referentiebereik.",
+  "unknown": "onbekend",
+  "Current ORP value": "Huidige ORP-waarde",
+  "pH reference": "pH-referentie",
+  "Status": "Status",
+  "ORP evaluation is disabled.": "ORP-evaluatie is uitgeschakeld."
 }

package/lib/i18n/pl.json

@@ -288,6 +288,13 @@
   "pH mixing run finished. Pump was switched off by the pH helper.": "Cykl mieszania pH zakończony. Pompa została wyłączona przez helper pH.",
   "pH mixing run finished. Pump was not switched off because another helper is active.": "Cykl mieszania pH zakończony. Pompa nie została wyłączona, ponieważ aktywny jest inny helper.",
   "pH mixing run finished. Pump was already running and was not switched off by the pH helper.": "Cykl mieszania pH zakończony. Pompa już pracowała i nie została wyłączona przez helper pH.",
+  "pH trend": "Trend pH",
+  "Overall pH status": "Ogólny status pH",
+  "pH is rising very quickly. Check dosing, alkalinity and water balance.": "pH rośnie bardzo szybko. Sprawdź dozowanie, alkaliczność i równowagę wody.",
+  "pH is rising noticeably. Observe the trend and check alkalinity and water balance.": "pH wyraźnie rośnie. Obserwuj trend i sprawdź alkaliczność oraz równowagę wody.",
+  "pH is slowly rising. Continue observing the trend.": "pH powoli rośnie. Kontynuuj obserwację trendu.",
+  "pH is falling. This can be plausible after pH correction or fresh water.": "pH spada. Może to być uzasadnione po korekcie pH lub dodaniu świeżej wody.",
+  "Not enough pH history is available yet. Collect more valid measurements.": "Nie ma jeszcze wystarczającej historii pH. Zbierz więcej prawidłowych pomiarów.",
 
   "No TDS source state configured.": "Nie skonfigurowano stanu źródła TDS.",
   "TDS source state configured.": "Skonfigurowano stan źródła TDS.",
@@ -317,5 +324,28 @@
   "not available": "niedostępne",
   "Trend status": "Status trendu",
   "Overall status": "Status ogólny",
-  "Recommendation": "Zalecenie"
+  "Recommendation": "Zalecenie",
+  "No ORP source state configured.": "Nie skonfigurowano stanu źródłowego ORP.",
+  "ORP source state configured.": "Skonfigurowano stan źródłowy ORP.",
+  "ORP source state could not be subscribed.": "Nie można subskrybować stanu źródłowego ORP.",
+  "ORP input is disabled.": "Wejście ORP jest wyłączone.",
+  "No valid ORP source is configured.": "Nie skonfigurowano prawidłowego źródła ORP.",
+  "The configured ORP source state does not exist.": "Skonfigurowany stan źródłowy ORP nie istnieje.",
+  "The configured ORP source could not be read.": "Nie można odczytać skonfigurowanego źródła ORP.",
+  "Unknown ORP source mode.": "Nieznany tryb źródła ORP.",
+  "Manual ORP value is used.": "Używana jest ręczna wartość ORP.",
+  "External ORP source is valid.": "Zewnętrzne źródło ORP jest prawidłowe.",
+  "The ORP value is invalid. Please check the measurement or sensor.": "Wartość ORP jest nieprawidłowa. Sprawdź pomiar lub czujnik.",
+  "ORP evaluation is waiting for the pool pump because the sensor is in a measurement section.": "Ocena ORP czeka na pompę basenu, ponieważ czujnik znajduje się w sekcji pomiarowej.",
+  "ORP evaluation is waiting until the measurement section has stabilized after pump start.": "Ocena ORP czeka, aż sekcja pomiarowa ustabilizuje się po uruchomieniu pompy.",
+  "ORP trend": "Trend ORP",
+  "ORP value is available, but pH reference is missing, disabled or outside the expected range. ORP interpretation is limited.": "Wartość ORP jest dostępna, ale odniesienie pH jest brakujące, wyłączone lub poza oczekiwanym zakresem. Interpretacja ORP jest ograniczona.",
+  "ORP value is low. Check pH and chlorine values manually and evaluate the water care situation.": "Wartość ORP jest niska. Sprawdź ręcznie wartości pH i chloru oraz oceń sytuację pielęgnacji wody.",
+  "ORP value is high. Check whether the measurement is plausible and evaluate the water values together.": "Wartość ORP jest wysoka. Sprawdź, czy pomiar jest wiarygodny, i oceń wartości wody łącznie.",
+  "ORP value is within the configured reference range.": "Wartość ORP mieści się w skonfigurowanym zakresie odniesienia.",
+  "unknown": "nieznany",
+  "Current ORP value": "Aktualna wartość ORP",
+  "pH reference": "Odniesienie pH",
+  "Status": "Status",
+  "ORP evaluation is disabled.": "Ocena ORP jest wyłączona."
 }

package/lib/i18n/pt.json

@@ -288,6 +288,13 @@
   "pH mixing run finished. Pump was switched off by the pH helper.": "Mistura de pH concluída. A bomba foi desligada pelo helper de pH.",
   "pH mixing run finished. Pump was not switched off because another helper is active.": "Mistura de pH concluída. A bomba não foi desligada porque outro helper está ativo.",
   "pH mixing run finished. Pump was already running and was not switched off by the pH helper.": "Mistura de pH concluída. A bomba já estava em funcionamento e não foi desligada pelo helper de pH.",
+  "pH trend": "Tendência de pH",
+  "Overall pH status": "Estado geral do pH",
+  "pH is rising very quickly. Check dosing, alkalinity and water balance.": "O pH está a subir muito rapidamente. Verifique a dosagem, a alcalinidade e o equilíbrio da água.",
+  "pH is rising noticeably. Observe the trend and check alkalinity and water balance.": "O pH está a subir de forma evidente. Observe a tendência e verifique a alcalinidade e o equilíbrio da água.",
+  "pH is slowly rising. Continue observing the trend.": "O pH está a subir lentamente. Continue a observar a tendência.",
+  "pH is falling. This can be plausible after pH correction or fresh water.": "O pH está a descer. Isto pode ser plausível após uma correção de pH ou adição de água fresca.",
+  "Not enough pH history is available yet. Collect more valid measurements.": "Ainda não há histórico de pH suficiente disponível. Recolha mais medições válidas.",
 
   "No TDS source state configured.": "Nenhum estado de origem de TDS configurado.",
   "TDS source state configured.": "Estado de origem de TDS configurado.",
@@ -317,5 +324,28 @@
   "not available": "não disponível",
   "Trend status": "Estado da tendência",
   "Overall status": "Estado geral",
-  "Recommendation": "Recomendação"
+  "Recommendation": "Recomendação",
+  "No ORP source state configured.": "Nenhum estado de origem ORP configurado.",
+  "ORP source state configured.": "Estado de origem ORP configurado.",
+  "ORP source state could not be subscribed.": "Não foi possível subscrever o estado de origem ORP.",
+  "ORP input is disabled.": "A entrada ORP está desativada.",
+  "No valid ORP source is configured.": "Nenhuma origem ORP válida está configurada.",
+  "The configured ORP source state does not exist.": "O estado de origem ORP configurado não existe.",
+  "The configured ORP source could not be read.": "Não foi possível ler a origem ORP configurada.",
+  "Unknown ORP source mode.": "Modo de origem ORP desconhecido.",
+  "Manual ORP value is used.": "O valor ORP manual é utilizado.",
+  "External ORP source is valid.": "A origem ORP externa é válida.",
+  "The ORP value is invalid. Please check the measurement or sensor.": "O valor ORP é inválido. Verifique a medição ou o sensor.",
+  "ORP evaluation is waiting for the pool pump because the sensor is in a measurement section.": "A avaliação ORP está à espera da bomba da piscina porque o sensor está numa secção de medição.",
+  "ORP evaluation is waiting until the measurement section has stabilized after pump start.": "A avaliação ORP aguarda até que a secção de medição estabilize após o arranque da bomba.",
+  "ORP trend": "Tendência ORP",
+  "ORP value is available, but pH reference is missing, disabled or outside the expected range. ORP interpretation is limited.": "O valor ORP está disponível, mas a referência de pH está em falta, desativada ou fora do intervalo esperado. A interpretação ORP é limitada.",
+  "ORP value is low. Check pH and chlorine values manually and evaluate the water care situation.": "O valor ORP está baixo. Verifique manualmente os valores de pH e cloro e avalie a situação do tratamento da água.",
+  "ORP value is high. Check whether the measurement is plausible and evaluate the water values together.": "O valor ORP está alto. Verifique se a medição é plausível e avalie os valores da água em conjunto.",
+  "ORP value is within the configured reference range.": "O valor ORP está dentro do intervalo de referência configurado.",
+  "unknown": "desconhecido",
+  "Current ORP value": "Valor ORP atual",
+  "pH reference": "Referência de pH",
+  "Status": "Estado",
+  "ORP evaluation is disabled.": "A avaliação ORP está desativada."
 }

package/lib/i18n/ru.json

@@ -288,6 +288,13 @@
   "pH mixing run finished. Pump was switched off by the pH helper.": "Цикл перемешивания pH завершен. Насос был выключен helper pH.",
   "pH mixing run finished. Pump was not switched off because another helper is active.": "Цикл перемешивания pH завершен. Насос не был выключен, потому что активен другой helper.",
   "pH mixing run finished. Pump was already running and was not switched off by the pH helper.": "Цикл перемешивания pH завершен. Насос уже работал и не был выключен helper pH.",
+  "pH trend": "Тренд pH",
+  "Overall pH status": "Общий статус pH",
+  "pH is rising very quickly. Check dosing, alkalinity and water balance.": "pH очень быстро повышается. Проверьте дозирование, щелочность и водный баланс.",
+  "pH is rising noticeably. Observe the trend and check alkalinity and water balance.": "pH заметно повышается. Наблюдайте за трендом и проверьте щелочность и водный баланс.",
+  "pH is slowly rising. Continue observing the trend.": "pH медленно повышается. Продолжайте наблюдать за трендом.",
+  "pH is falling. This can be plausible after pH correction or fresh water.": "pH снижается. Это может быть допустимо после коррекции pH или добавления свежей воды.",
+  "Not enough pH history is available yet. Collect more valid measurements.": "Пока недостаточно истории pH. Соберите больше действительных измерений.",
 
   "No TDS source state configured.": "Состояние источника TDS не настроено.",
   "TDS source state configured.": "Состояние источника TDS настроено.",
@@ -317,5 +324,28 @@
   "not available": "недоступно",
   "Trend status": "Статус тенденции",
   "Overall status": "Общий статус",
-  "Recommendation": "Рекомендация"
+  "Recommendation": "Рекомендация",
+  "No ORP source state configured.": "Не настроено состояние-источник ORP.",
+  "ORP source state configured.": "Состояние-источник ORP настроено.",
+  "ORP source state could not be subscribed.": "Не удалось подписаться на состояние-источник ORP.",
+  "ORP input is disabled.": "Вход ORP отключен.",
+  "No valid ORP source is configured.": "Не настроен действительный источник ORP.",
+  "The configured ORP source state does not exist.": "Настроенное состояние-источник ORP не существует.",
+  "The configured ORP source could not be read.": "Не удалось прочитать настроенный источник ORP.",
+  "Unknown ORP source mode.": "Неизвестный режим источника ORP.",
+  "Manual ORP value is used.": "Используется ручное значение ORP.",
+  "External ORP source is valid.": "Внешний источник ORP действителен.",
+  "The ORP value is invalid. Please check the measurement or sensor.": "Значение ORP недействительно. Проверьте измерение или датчик.",
+  "ORP evaluation is waiting for the pool pump because the sensor is in a measurement section.": "Оценка ORP ожидает насос бассейна, так как датчик находится в измерительном участке.",
+  "ORP evaluation is waiting until the measurement section has stabilized after pump start.": "Оценка ORP ожидает, пока измерительный участок стабилизируется после запуска насоса.",
+  "ORP trend": "Тренд ORP",
+  "ORP value is available, but pH reference is missing, disabled or outside the expected range. ORP interpretation is limited.": "Значение ORP доступно, но опорное значение pH отсутствует, отключено или находится вне ожидаемого диапазона. Интерпретация ORP ограничена.",
+  "ORP value is low. Check pH and chlorine values manually and evaluate the water care situation.": "Значение ORP низкое. Проверьте значения pH и хлора вручную и оцените ситуацию с уходом за водой.",
+  "ORP value is high. Check whether the measurement is plausible and evaluate the water values together.": "Значение ORP высокое. Проверьте правдоподобность измерения и оцените параметры воды вместе.",
+  "ORP value is within the configured reference range.": "Значение ORP находится в настроенном опорном диапазоне.",
+  "unknown": "неизвестно",
+  "Current ORP value": "Текущее значение ORP",
+  "pH reference": "Опорное значение pH",
+  "Status": "Статус",
+  "ORP evaluation is disabled.": "Оценка ORP отключена."
 }

package/lib/i18n/uk.json

@@ -288,6 +288,13 @@
   "pH mixing run finished. Pump was switched off by the pH helper.": "Цикл перемішування pH завершено. Насос було вимкнено helper pH.",
   "pH mixing run finished. Pump was not switched off because another helper is active.": "Цикл перемішування pH завершено. Насос не було вимкнено, оскільки активний інший helper.",
   "pH mixing run finished. Pump was already running and was not switched off by the pH helper.": "Цикл перемішування pH завершено. Насос уже працював і не був вимкнений helper pH.",
+  "pH trend": "Тренд pH",
+  "Overall pH status": "Загальний статус pH",
+  "pH is rising very quickly. Check dosing, alkalinity and water balance.": "pH дуже швидко підвищується. Перевірте дозування, лужність і баланс води.",
+  "pH is rising noticeably. Observe the trend and check alkalinity and water balance.": "pH помітно підвищується. Спостерігайте за трендом і перевірте лужність та баланс води.",
+  "pH is slowly rising. Continue observing the trend.": "pH повільно підвищується. Продовжуйте спостерігати за трендом.",
+  "pH is falling. This can be plausible after pH correction or fresh water.": "pH знижується. Це може бути правдоподібним після корекції pH або додавання свіжої води.",
+  "Not enough pH history is available yet. Collect more valid measurements.": "Історії pH поки недостатньо. Зберіть більше дійсних вимірювань.",
 
   "No TDS source state configured.": "Стан джерела TDS не налаштовано.",
   "TDS source state configured.": "Стан джерела TDS налаштовано.",
@@ -317,5 +324,28 @@
   "not available": "недоступно",
   "Trend status": "Статус тенденції",
   "Overall status": "Загальний статус",
-  "Recommendation": "Рекомендація"
+  "Recommendation": "Рекомендація",
+  "No ORP source state configured.": "Не налаштовано стан-джерело ORP.",
+  "ORP source state configured.": "Стан-джерело ORP налаштовано.",
+  "ORP source state could not be subscribed.": "Не вдалося підписатися на стан-джерело ORP.",
+  "ORP input is disabled.": "Вхід ORP вимкнено.",
+  "No valid ORP source is configured.": "Не налаштовано дійсне джерело ORP.",
+  "The configured ORP source state does not exist.": "Налаштований стан-джерело ORP не існує.",
+  "The configured ORP source could not be read.": "Не вдалося прочитати налаштоване джерело ORP.",
+  "Unknown ORP source mode.": "Невідомий режим джерела ORP.",
+  "Manual ORP value is used.": "Використовується ручне значення ORP.",
+  "External ORP source is valid.": "Зовнішнє джерело ORP є дійсним.",
+  "The ORP value is invalid. Please check the measurement or sensor.": "Значення ORP недійсне. Перевірте вимірювання або датчик.",
+  "ORP evaluation is waiting for the pool pump because the sensor is in a measurement section.": "Оцінювання ORP очікує на насос басейну, оскільки датчик розташований у вимірювальній ділянці.",
+  "ORP evaluation is waiting until the measurement section has stabilized after pump start.": "Оцінювання ORP очікує, доки вимірювальна ділянка стабілізується після запуску насоса.",
+  "ORP trend": "Тренд ORP",
+  "ORP value is available, but pH reference is missing, disabled or outside the expected range. ORP interpretation is limited.": "Значення ORP доступне, але еталон pH відсутній, вимкнений або поза очікуваним діапазоном. Інтерпретація ORP обмежена.",
+  "ORP value is low. Check pH and chlorine values manually and evaluate the water care situation.": "Значення ORP низьке. Перевірте значення pH і хлору вручну та оцініть ситуацію з доглядом за водою.",
+  "ORP value is high. Check whether the measurement is plausible and evaluate the water values together.": "Значення ORP високе. Перевірте, чи вимірювання є правдоподібним, і оцініть показники води разом.",
+  "ORP value is within the configured reference range.": "Значення ORP знаходиться в налаштованому еталонному діапазоні.",
+  "unknown": "невідомо",
+  "Current ORP value": "Поточне значення ORP",
+  "pH reference": "Еталон pH",
+  "Status": "Статус",
+  "ORP evaluation is disabled.": "Оцінювання ORP вимкнено."
 }

package/lib/i18n/zh-cn.json

@@ -288,6 +288,13 @@
   "pH mixing run finished. Pump was switched off by the pH helper.": "pH 混合运行已结束。泵已由 pH helper 关闭。",
   "pH mixing run finished. Pump was not switched off because another helper is active.": "pH 混合运行已结束。泵未关闭，因为另一个 helper 处于活动状态。",
   "pH mixing run finished. Pump was already running and was not switched off by the pH helper.": "pH 混合运行已结束。泵已在运行，未由 pH helper 关闭。",
+  "pH trend": "pH 趋势",
+  "Overall pH status": "总体 pH 状态",
+  "pH is rising very quickly. Check dosing, alkalinity and water balance.": "pH 上升非常快。请检查投药、碱度和水质平衡。",
+  "pH is rising noticeably. Observe the trend and check alkalinity and water balance.": "pH 明显上升。请观察趋势并检查碱度和水质平衡。",
+  "pH is slowly rising. Continue observing the trend.": "pH 正在缓慢上升。请继续观察趋势。",
+  "pH is falling. This can be plausible after pH correction or fresh water.": "pH 正在下降。这在 pH 校正或加入新水后可能是合理的。",
+  "Not enough pH history is available yet. Collect more valid measurements.": "pH 历史数据尚不足。请收集更多有效测量值。",
 
   "No TDS source state configured.": "未配置 TDS 源状态。",
   "TDS source state configured.": "已配置 TDS 源状态。",
@@ -317,5 +324,28 @@
   "not available": "不可用",
   "Trend status": "趋势状态",
   "Overall status": "总体状态",
-  "Recommendation": "建议"
+  "Recommendation": "建议",
+  "No ORP source state configured.": "未配置 ORP 源状态。",
+  "ORP source state configured.": "ORP 源状态已配置。",
+  "ORP source state could not be subscribed.": "无法订阅 ORP 源状态。",
+  "ORP input is disabled.": "ORP 输入已禁用。",
+  "No valid ORP source is configured.": "未配置有效的 ORP 源。",
+  "The configured ORP source state does not exist.": "配置的 ORP 源状态不存在。",
+  "The configured ORP source could not be read.": "无法读取配置的 ORP 源。",
+  "Unknown ORP source mode.": "未知的 ORP 源模式。",
+  "Manual ORP value is used.": "正在使用手动 ORP 值。",
+  "External ORP source is valid.": "外部 ORP 源有效。",
+  "The ORP value is invalid. Please check the measurement or sensor.": "ORP 值无效。请检查测量值或传感器。",
+  "ORP evaluation is waiting for the pool pump because the sensor is in a measurement section.": "ORP 评估正在等待泳池泵，因为传感器位于测量段中。",
+  "ORP evaluation is waiting until the measurement section has stabilized after pump start.": "ORP 评估正在等待测量段在泵启动后稳定。",
+  "ORP trend": "ORP 趋势",
+  "ORP value is available, but pH reference is missing, disabled or outside the expected range. ORP interpretation is limited.": "ORP 值可用，但 pH 参考值缺失、已禁用或超出预期范围。ORP 解读受限。",
+  "ORP value is low. Check pH and chlorine values manually and evaluate the water care situation.": "ORP 值偏低。请手动检查 pH 和氯值，并评估水质维护情况。",
+  "ORP value is high. Check whether the measurement is plausible and evaluate the water values together.": "ORP 值偏高。请检查测量值是否可信，并结合各项水质值进行评估。",
+  "ORP value is within the configured reference range.": "ORP 值在配置的参考范围内。",
+  "unknown": "未知",
+  "Current ORP value": "当前 ORP 值",
+  "pH reference": "pH 参考值",
+  "Status": "状态",
+  "ORP evaluation is disabled.": "ORP 评估已禁用。"
 }