iobroker.nut2 0.5.2

package/admin/i18n/zh-cn.json

@@ -0,0 +1,150 @@
+{
+  "tab_connection": "连接",
+  "tab_advanced": "高级",
+  "label_host": "NUT 服务器主机",
+  "help_host": "NUT 服务器的主机名或 IP 地址（例如 192.168.1.100）",
+  "label_port": "端口",
+  "label_networkInterface": "网络接口",
+  "tooltip_networkInterface": "选择用于传出连接的特定网络接口（可选）",
+  "label_pollInterval": "轮询间隔（秒）",
+  "help_pollInterval": "查询 NUT 服务器的频率（2–300 秒）",
+  "label_username": "用户名",
+  "help_username": "NUT 用户名（可选——发送命令和修改可写变量时需要）",
+  "label_password": "密码",
+  "btn_checkConnection": "测试连接",
+  "label_commandTimeout": "命令超时（秒）",
+  "help_commandTimeout": "单个 NUT 命令的超时时间（1–30 秒）",
+  "label_enableCommands": "启用即时命令",
+  "help_enableCommands": "允许向 UPS 发送即时命令 (INSTCMD)——需要身份验证",
+  "label_enableSetVar": "启用可写变量",
+  "help_enableSetVar": "允许更改 UPS 可写变量 (SET VAR)——需要身份验证",
+  "supportHeader": "支持",
+  "aboutInfo": "ioBroker.nut2 通过 Network UPS Tools (NUT) 协议监控 UPS 设备。连接到 NUT 服务器的所有 UPS 设备会被自动发现。",
+  "donateKofi": "在 Ko-fi 上支持",
+  "donatePaypal": "通过 PayPal 捐赠",
+  "channelInfo": "适配器信息",
+  "connectionStatus": "连接状态",
+  "channelBattery": "电池",
+  "channelDevice": "设备",
+  "channelDriver": "驱动程序",
+  "channelInput": "输入功率",
+  "channelOutput": "输出功率",
+  "channelUps": "UPS",
+  "channelOutlet": "插座",
+  "channelAmbient": "环境传感器",
+  "channelStatus": "状态标志",
+  "channelCommands": "命令",
+  "statusRaw": "原始状态",
+  "statusSeverity": "严重程度",
+  "statusDisplay": "状态显示",
+  "upsReachable": "可访问",
+  "channelUpsInfo": "信息",
+  "flagOnline": "市电供电",
+  "flagOnBattery": "使用电池",
+  "flagLowBattery": "电量低",
+  "flagHighBattery": "电量满",
+  "flagReplaceBattery": "更换电池",
+  "flagCharging": "充电中",
+  "flagDischarging": "放电中",
+  "flagBypass": "旁路激活",
+  "flagCalibrating": "校准中",
+  "flagOff": "关闭",
+  "flagOverloaded": "过载",
+  "flagTrimming": "削减电压",
+  "flagBoosting": "升压",
+  "flagForcedShutdown": "强制关机",
+  "flagAlarm": "警报",
+  "cmdBeeperDisable": "禁用蜂鸣器",
+  "cmdBeeperEnable": "启用蜂鸣器",
+  "cmdBeeperMute": "静音蜂鸣器",
+  "cmdLoadOff": "关闭负载",
+  "cmdLoadOn": "打开负载",
+  "cmdLoadOffDelay": "延时关闭负载",
+  "cmdLoadOnDelay": "延时打开负载",
+  "cmdShutdownReturn": "关机并恢复",
+  "cmdShutdownStayoff": "关机并保持关闭",
+  "cmdShutdownStop": "停止关机",
+  "cmdShutdownReboot": "重启UPS",
+  "cmdTestBatteryStart": "开始电池测试",
+  "cmdTestBatteryStop": "停止电池测试",
+  "cmdCalibrateStart": "开始校准",
+  "cmdCalibrateStop": "停止校准",
+  "battery.charge": "电量",
+  "battery.charge.low": "低电量阈值",
+  "battery.runtime": "剩余运行时间",
+  "battery.type": "电池类型",
+  "battery.voltage": "电池电压",
+  "battery.temperature": "电池温度",
+  "battery.capacity": "电池容量",
+  "battery.charger.status": "充电器状态",
+  "device.mfr": "制造商",
+  "device.model": "型号",
+  "device.serial": "序列号",
+  "device.type": "设备类型",
+  "driver.name": "驱动名称",
+  "driver.version": "驱动版本",
+  "driver.version.data": "驱动数据版本",
+  "driver.version.internal": "驱动内部版本",
+  "driver.parameter.pollfreq": "轮询频率",
+  "driver.parameter.pollinterval": "轮询间隔",
+  "driver.parameter.port": "端口",
+  "driver.parameter.synchronous": "同步模式",
+  "driver.flag.ignorelb": "忽略低电量",
+  "driver.version.usb": "USB库版本",
+  "input.voltage": "输入电压",
+  "input.frequency": "输入频率",
+  "input.transfer.high": "高转换电压",
+  "input.transfer.low": "低转换电压",
+  "input.voltage.extended": "扩展电压范围",
+  "output.voltage": "输出电压",
+  "output.frequency": "输出频率",
+  "output.voltage.nominal": "额定输出电压",
+  "output.frequency.nominal": "额定输出频率",
+  "output.current": "输出电流",
+  "ups.status": "UPS状态",
+  "ups.load": "负载",
+  "ups.power": "视在功率",
+  "ups.realpower": "有功功率",
+  "ups.power.nominal": "额定功率",
+  "ups.temperature": "UPS温度",
+  "ups.delay.shutdown": "关机延迟",
+  "ups.delay.start": "启动延迟",
+  "ups.timer.shutdown": "关机计时器",
+  "ups.timer.start": "启动计时器",
+  "ups.firmware": "固件版本",
+  "ups.beeper.status": "蜂鸣器状态",
+  "ups.mfr": "UPS制造商",
+  "ups.model": "UPS型号",
+  "ups.serial": "UPS序列号",
+  "ups.vendorid": "供应商ID",
+  "ups.productid": "产品ID",
+  "outlet.desc": "插座描述",
+  "outlet.id": "插座ID",
+  "outlet.switchable": "可切换",
+  "outlet.status": "插座状态",
+  "ambient.temperature": "环境温度",
+  "ambient.humidity": "环境湿度",
+  "flagWaiting": "等待中",
+  "flagEcoMode": "ECO 模式",
+  "label_useTls": "使用 TLS (STARTTLS)",
+  "help_useTls": "通过 STARTTLS 加密连接 — 发送用户名和密码时推荐启用",
+  "label_tlsRejectUnauthorized": "要求有效证书",
+  "help_tlsRejectUnauthorized": "拒绝自签名或无效证书。典型的自签名 NUT 服务器请保持关闭；启用以防范中间人攻击",
+  "cmdShutdownDefault": "默认关机",
+  "cmdShutdownRebootGraceful": "平稳重启",
+  "cmdTestPanelStart": "开始面板测试",
+  "cmdTestPanelStop": "停止面板测试",
+  "cmdTestFailureStart": "开始断电测试",
+  "cmdTestFailureStop": "停止断电测试",
+  "cmdTestBatteryStartQuick": "开始快速电池测试",
+  "cmdTestBatteryStartLow": "电池测试至低电量",
+  "cmdTestBatteryStartDeep": "开始深度电池测试",
+  "cmdTestSystemStart": "开始系统测试",
+  "cmdBypassStart": "切换到旁路模式",
+  "cmdBypassStop": "退出旁路模式",
+  "cmdResetInputMinmax": "重置输入最小/最大值",
+  "cmdResetWatchdog": "重置看门狗定时器",
+  "cmdBeeperToggle": "切换蜂鸣器",
+  "flagTesting": "测试中",
+  "flagOverheat": "过热"
+}

package/admin/jsonConfig.json

@@ -0,0 +1,204 @@
+{
+  "type": "tabs",
+  "i18n": true,
+  "items": {
+    "tab_connection": {
+      "type": "panel",
+      "label": "tab_connection",
+      "items": {
+        "host": {
+          "type": "text",
+          "label": "label_host",
+          "help": "help_host",
+          "placeholder": "192.168.1.100",
+          "xs": 12,
+          "sm": 12,
+          "md": 6,
+          "lg": 6,
+          "xl": 6
+        },
+        "port": {
+          "type": "number",
+          "label": "label_port",
+          "min": 1,
+          "max": 65535,
+          "default": 3493,
+          "xs": 12,
+          "sm": 12,
+          "md": 3,
+          "lg": 3,
+          "xl": 3
+        },
+        "pollInterval": {
+          "type": "number",
+          "label": "label_pollInterval",
+          "help": "help_pollInterval",
+          "min": 2,
+          "max": 300,
+          "default": 15,
+          "xs": 12,
+          "sm": 12,
+          "md": 3,
+          "lg": 3,
+          "xl": 3
+        },
+        "networkInterface": {
+          "newLine": true,
+          "type": "ip",
+          "label": "label_networkInterface",
+          "tooltip": "tooltip_networkInterface",
+          "onlyIp4": true,
+          "noInternal": true,
+          "listenOnAllPorts": true,
+          "xs": 12,
+          "sm": 12,
+          "md": 6,
+          "lg": 6,
+          "xl": 6
+        },
+        "username": {
+          "newLine": true,
+          "type": "text",
+          "label": "label_username",
+          "help": "help_username",
+          "xs": 12,
+          "sm": 12,
+          "md": 6,
+          "lg": 6,
+          "xl": 6
+        },
+        "password": {
+          "type": "password",
+          "label": "label_password",
+          "xs": 12,
+          "sm": 12,
+          "md": 6,
+          "lg": 6,
+          "xl": 6
+        },
+        "useTls": {
+          "newLine": true,
+          "type": "checkbox",
+          "label": "label_useTls",
+          "help": "help_useTls",
+          "default": false,
+          "xs": 12,
+          "sm": 12,
+          "md": 6,
+          "lg": 6,
+          "xl": 6
+        },
+        "tlsRejectUnauthorized": {
+          "type": "checkbox",
+          "label": "label_tlsRejectUnauthorized",
+          "help": "help_tlsRejectUnauthorized",
+          "default": false,
+          "hidden": "!data.useTls",
+          "xs": 12,
+          "sm": 12,
+          "md": 6,
+          "lg": 6,
+          "xl": 6
+        },
+        "checkConnection": {
+          "newLine": true,
+          "type": "sendTo",
+          "command": "checkConnection",
+          "jsonData": "{\"host\": \"${data.host}\", \"port\": ${data.port}, \"username\": \"${data.username}\", \"password\": \"${data.password}\", \"networkInterface\": \"${data.networkInterface}\", \"commandTimeout\": ${data.commandTimeout}, \"useTls\": ${data.useTls}, \"tlsRejectUnauthorized\": ${data.tlsRejectUnauthorized}}",
+          "label": "btn_checkConnection",
+          "xs": 12,
+          "sm": 12,
+          "md": 4,
+          "lg": 4,
+          "xl": 4
+        },
+        "_supportHeader": {
+          "newLine": true,
+          "type": "header",
+          "text": "supportHeader",
+          "size": 5
+        },
+        "_aboutInfo": {
+          "type": "staticText",
+          "text": "aboutInfo",
+          "xs": 12,
+          "sm": 12,
+          "md": 12,
+          "lg": 12,
+          "xl": 12,
+          "style": {
+            "fontSize": 14,
+            "marginBottom": 16
+          }
+        },
+        "_kofiLink": {
+          "type": "staticLink",
+          "href": "https://ko-fi.com/krobipd",
+          "label": "donateKofi",
+          "button": true,
+          "variant": "outlined",
+          "color": "primary",
+          "xs": 12,
+          "sm": 6,
+          "md": 4,
+          "lg": 4,
+          "xl": 4
+        },
+        "_paypalLink": {
+          "type": "staticLink",
+          "href": "https://paypal.me/krobipd",
+          "label": "donatePaypal",
+          "button": true,
+          "variant": "outlined",
+          "color": "primary",
+          "xs": 12,
+          "sm": 6,
+          "md": 4,
+          "lg": 4,
+          "xl": 4
+        }
+      }
+    },
+    "tab_advanced": {
+      "type": "panel",
+      "label": "tab_advanced",
+      "items": {
+        "commandTimeout": {
+          "type": "number",
+          "label": "label_commandTimeout",
+          "help": "help_commandTimeout",
+          "min": 1,
+          "max": 30,
+          "default": 5,
+          "xs": 12,
+          "sm": 12,
+          "md": 4,
+          "lg": 4,
+          "xl": 4
+        },
+        "enableCommands": {
+          "type": "checkbox",
+          "label": "label_enableCommands",
+          "help": "help_enableCommands",
+          "default": false,
+          "xs": 12,
+          "sm": 12,
+          "md": 6,
+          "lg": 6,
+          "xl": 6
+        },
+        "enableSetVar": {
+          "type": "checkbox",
+          "label": "label_enableSetVar",
+          "help": "help_enableSetVar",
+          "default": false,
+          "xs": 12,
+          "sm": 12,
+          "md": 6,
+          "lg": 6,
+          "xl": 6
+        }
+      }
+    }
+  }
+}

package/admin/nut2.svg

@@ -0,0 +1,19 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 256 256" width="256" height="256">
+  <defs>
+    <linearGradient id="battGrad" x1="0" y1="0" x2="0" y2="1">
+      <stop offset="0%" stop-color="#5cb85c"/>
+      <stop offset="100%" stop-color="#3d8b3d"/>
+    </linearGradient>
+  </defs>
+  <!-- Battery terminal -->
+  <rect x="96" y="24" width="64" height="24" rx="4" fill="url(#battGrad)"/>
+  <!-- Battery body -->
+  <rect x="56" y="48" width="144" height="184" rx="16" fill="url(#battGrad)"/>
+  <!-- Inner cutout lines (charge level indicators) -->
+  <rect x="76" y="72" width="104" height="4" rx="2" fill="rgba(255,255,255,0.4)"/>
+  <rect x="76" y="108" width="104" height="4" rx="2" fill="rgba(255,255,255,0.4)"/>
+  <rect x="76" y="144" width="104" height="4" rx="2" fill="rgba(255,255,255,0.4)"/>
+  <rect x="76" y="180" width="104" height="4" rx="2" fill="rgba(255,255,255,0.4)"/>
+  <!-- Lightning bolt -->
+  <polygon points="148,80 116,148 140,148 108,216 152,136 128,136 160,80" fill="#F5A623"/>
+</svg>

package/build/lib/coerce.js

@@ -0,0 +1,114 @@
+"use strict";
+var __defProp = Object.defineProperty;
+var __getOwnPropDesc = Object.getOwnPropertyDescriptor;
+var __getOwnPropNames = Object.getOwnPropertyNames;
+var __hasOwnProp = Object.prototype.hasOwnProperty;
+var __export = (target, all) => {
+  for (var name in all)
+    __defProp(target, name, { get: all[name], enumerable: true });
+};
+var __copyProps = (to, from, except, desc) => {
+  if (from && typeof from === "object" || typeof from === "function") {
+    for (let key of __getOwnPropNames(from))
+      if (!__hasOwnProp.call(to, key) && key !== except)
+        __defProp(to, key, { get: () => from[key], enumerable: !(desc = __getOwnPropDesc(from, key)) || desc.enumerable });
+  }
+  return to;
+};
+var __toCommonJS = (mod) => __copyProps(__defProp({}, "__esModule", { value: true }), mod);
+var coerce_exports = {};
+__export(coerce_exports, {
+  coerceCommandTimeoutMs: () => coerceCommandTimeoutMs,
+  coerceHost: () => coerceHost,
+  coercePollIntervalSec: () => coercePollIntervalSec,
+  coercePort: () => coercePort,
+  computeReconnectDelay: () => computeReconnectDelay,
+  errText: () => errText,
+  localAddressOf: () => localAddressOf,
+  parseDecimal: () => parseDecimal
+});
+module.exports = __toCommonJS(coerce_exports);
+var import_types = require("./types");
+const DECIMAL_NUMBER_RE = /^-?\d+(\.\d+)?$/;
+function parseDecimal(raw) {
+  if (typeof raw === "number") {
+    return Number.isFinite(raw) ? raw : NaN;
+  }
+  if (typeof raw === "string" && DECIMAL_NUMBER_RE.test(raw.trim())) {
+    return Number(raw.trim());
+  }
+  return NaN;
+}
+function errText(err) {
+  if (err instanceof Error) {
+    return err.message;
+  }
+  if (err === null) {
+    return "null";
+  }
+  if (err === void 0) {
+    return "undefined";
+  }
+  if (typeof err === "string") {
+    return err;
+  }
+  if (typeof err === "number" || typeof err === "boolean" || typeof err === "bigint") {
+    return String(err);
+  }
+  try {
+    return JSON.stringify(err);
+  } catch {
+    return Object.prototype.toString.call(err);
+  }
+}
+function coerceHost(raw) {
+  if (typeof raw !== "string") {
+    return null;
+  }
+  const trimmed = raw.trim();
+  return trimmed.length > 0 ? trimmed : null;
+}
+function localAddressOf(raw) {
+  if (typeof raw !== "string") {
+    return void 0;
+  }
+  const trimmed = raw.trim();
+  return trimmed.length > 0 && trimmed !== "0.0.0.0" ? trimmed : void 0;
+}
+function coercePort(raw) {
+  const n = parseDecimal(raw);
+  if (!Number.isFinite(n)) {
+    return import_types.NUT_DEFAULT_PORT;
+  }
+  return Math.max(1, Math.min(65535, Math.floor(n)));
+}
+function coercePollIntervalSec(raw) {
+  const n = parseDecimal(raw);
+  if (!Number.isFinite(n)) {
+    return 15;
+  }
+  return Math.max(2, Math.min(300, Math.floor(n)));
+}
+function coerceCommandTimeoutMs(raw) {
+  const n = parseDecimal(raw);
+  if (!Number.isFinite(n)) {
+    return import_types.NUT_DEFAULT_COMMAND_TIMEOUT;
+  }
+  return Math.max(1, Math.min(30, Math.floor(n))) * 1e3;
+}
+function computeReconnectDelay(attempt, baseMs, maxMs) {
+  const a = Math.max(1, Math.floor(attempt));
+  return Math.min(baseMs * 2 ** (a - 1), maxMs);
+}
+// Annotate the CommonJS export names for ESM import in node:
+0 && (module.exports = {
+  coerceCommandTimeoutMs,
+  coerceHost,
+  coercePollIntervalSec,
+  coercePort,
+  computeReconnectDelay,
+  errText,
+  localAddressOf,
+  parseDecimal
+});
+//# sourceMappingURL=coerce.js.map

package/build/lib/coerce.js.map

@@ -0,0 +1,7 @@
+{
+  "version": 3,
+  "sources": ["../../src/lib/coerce.ts"],
+  "sourcesContent": ["import { NUT_DEFAULT_COMMAND_TIMEOUT, NUT_DEFAULT_PORT } from \"./types\";\n\n// Strict decimal-only number parsing (fleet line, hassemu E8 origin): a plain\n// float parse would half-accept garbage suffixes (\"34abc\" \u2192 34) and allow\n// hex/exponential notation. Only `-?\\d+(\\.\\d+)?` counts as a number.\nconst DECIMAL_NUMBER_RE = /^-?\\d+(\\.\\d+)?$/;\n\n/**\n * Strict decimal parse: returns the number only for a plain finite decimal\n * (`-?\\d+(\\.\\d+)?`), otherwise NaN. Rejects garbage suffixes (\"12abc\"),\n * non-finite tokens (\"Infinity\") and hex/exponential notation. Shared by the\n * config validators and the device-value type detector.\n *\n * @param raw Raw value (string from NUT/admin config, or already a number)\n */\nexport function parseDecimal(raw: unknown): number {\n  if (typeof raw === \"number\") {\n    return Number.isFinite(raw) ? raw : NaN;\n  }\n  if (typeof raw === \"string\" && DECIMAL_NUMBER_RE.test(raw.trim())) {\n    return Number(raw.trim());\n  }\n  return NaN;\n}\n\n/**\n * Extract a log-friendly message from a thrown / rejected value.\n *\n * @param err Caught value of unknown shape\n */\nexport function errText(err: unknown): string {\n  if (err instanceof Error) {\n    return err.message;\n  }\n  if (err === null) {\n    return \"null\";\n  }\n  if (err === undefined) {\n    return \"undefined\";\n  }\n  if (typeof err === \"string\") {\n    return err;\n  }\n  if (typeof err === \"number\" || typeof err === \"boolean\" || typeof err === \"bigint\") {\n    return String(err);\n  }\n  try {\n    return JSON.stringify(err);\n  } catch {\n    return Object.prototype.toString.call(err);\n  }\n}\n\n/**\n * Validate and return the NUT server host. Returns null if the host\n * is missing or not a non-empty string after trimming.\n *\n * @param raw Raw host value from admin config\n */\nexport function coerceHost(raw: unknown): string | null {\n  if (typeof raw !== \"string\") {\n    return null;\n  }\n  const trimmed = raw.trim();\n  return trimmed.length > 0 ? trimmed : null;\n}\n\n/**\n * Resolve the outgoing source-bind address from the admin `networkInterface`.\n * Empty or the \"all interfaces\" sentinel `0.0.0.0` mean \"let the OS choose the\n * source\" \u2192 undefined (no explicit bind).\n *\n * @param raw Raw networkInterface value from admin config\n */\nexport function localAddressOf(raw: unknown): string | undefined {\n  if (typeof raw !== \"string\") {\n    return undefined;\n  }\n  const trimmed = raw.trim();\n  return trimmed.length > 0 && trimmed !== \"0.0.0.0\" ? trimmed : undefined;\n}\n\n/**\n * Coerce NUT port to a valid integer in [1, 65535], default NUT_DEFAULT_PORT.\n *\n * @param raw Raw port value from admin config\n */\nexport function coercePort(raw: unknown): number {\n  const n = parseDecimal(raw);\n  if (!Number.isFinite(n)) {\n    return NUT_DEFAULT_PORT;\n  }\n  return Math.max(1, Math.min(65535, Math.floor(n)));\n}\n\n/**\n * Coerce poll interval to seconds, clamped to [2, 300], default 15.\n * Matches admin/jsonConfig min/max.\n *\n * The lower bound is where NUT itself stops producing new data: ups.conf's\n * `pollinterval` \u2014 how often the driver refreshes the UPS status \u2014 defaults to\n * 2 seconds, and `pollfreq` (the full variable set, usbhid-ups/snmp-ups/nutdrv_qx)\n * to 30. Polling faster than the driver only re-reads unchanged values.\n *\n * @param raw Raw pollInterval from admin config (seconds)\n */\nexport function coercePollIntervalSec(raw: unknown): number {\n  const n = parseDecimal(raw);\n  if (!Number.isFinite(n)) {\n    return 15;\n  }\n  return Math.max(2, Math.min(300, Math.floor(n)));\n}\n\n/**\n * Coerce command timeout from seconds to milliseconds,\n * clamped to [1s, 30s] \u2192 [1000, 30000], default 5000ms.\n *\n * @param raw Raw commandTimeout from admin config (seconds)\n */\nexport function coerceCommandTimeoutMs(raw: unknown): number {\n  const n = parseDecimal(raw);\n  if (!Number.isFinite(n)) {\n    return NUT_DEFAULT_COMMAND_TIMEOUT;\n  }\n  return Math.max(1, Math.min(30, Math.floor(n))) * 1000;\n}\n\n/**\n * Exponential reconnect backoff: attempt 1 \u2192 baseMs, doubling each attempt, capped at maxMs.\n *\n * @param attempt 1-based attempt counter (values < 1 are treated as 1)\n * @param baseMs Delay for the first attempt\n * @param maxMs Upper bound for the delay\n */\nexport function computeReconnectDelay(attempt: number, baseMs: number, maxMs: number): number {\n  const a = Math.max(1, Math.floor(attempt));\n  return Math.min(baseMs * 2 ** (a - 1), maxMs);\n}\n"],
+  "mappings": ";;;;;;;;;;;;;;;;;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,mBAA8D;AAK9D,MAAM,oBAAoB;AAUnB,SAAS,aAAa,KAAsB;AACjD,MAAI,OAAO,QAAQ,UAAU;AAC3B,WAAO,OAAO,SAAS,GAAG,IAAI,MAAM;AAAA,EACtC;AACA,MAAI,OAAO,QAAQ,YAAY,kBAAkB,KAAK,IAAI,KAAK,CAAC,GAAG;AACjE,WAAO,OAAO,IAAI,KAAK,CAAC;AAAA,EAC1B;AACA,SAAO;AACT;AAOO,SAAS,QAAQ,KAAsB;AAC5C,MAAI,eAAe,OAAO;AACxB,WAAO,IAAI;AAAA,EACb;AACA,MAAI,QAAQ,MAAM;AAChB,WAAO;AAAA,EACT;AACA,MAAI,QAAQ,QAAW;AACrB,WAAO;AAAA,EACT;AACA,MAAI,OAAO,QAAQ,UAAU;AAC3B,WAAO;AAAA,EACT;AACA,MAAI,OAAO,QAAQ,YAAY,OAAO,QAAQ,aAAa,OAAO,QAAQ,UAAU;AAClF,WAAO,OAAO,GAAG;AAAA,EACnB;AACA,MAAI;AACF,WAAO,KAAK,UAAU,GAAG;AAAA,EAC3B,QAAQ;AACN,WAAO,OAAO,UAAU,SAAS,KAAK,GAAG;AAAA,EAC3C;AACF;AAQO,SAAS,WAAW,KAA6B;AACtD,MAAI,OAAO,QAAQ,UAAU;AAC3B,WAAO;AAAA,EACT;AACA,QAAM,UAAU,IAAI,KAAK;AACzB,SAAO,QAAQ,SAAS,IAAI,UAAU;AACxC;AASO,SAAS,eAAe,KAAkC;AAC/D,MAAI,OAAO,QAAQ,UAAU;AAC3B,WAAO;AAAA,EACT;AACA,QAAM,UAAU,IAAI,KAAK;AACzB,SAAO,QAAQ,SAAS,KAAK,YAAY,YAAY,UAAU;AACjE;AAOO,SAAS,WAAW,KAAsB;AAC/C,QAAM,IAAI,aAAa,GAAG;AAC1B,MAAI,CAAC,OAAO,SAAS,CAAC,GAAG;AACvB,WAAO;AAAA,EACT;AACA,SAAO,KAAK,IAAI,GAAG,KAAK,IAAI,OAAO,KAAK,MAAM,CAAC,CAAC,CAAC;AACnD;AAaO,SAAS,sBAAsB,KAAsB;AAC1D,QAAM,IAAI,aAAa,GAAG;AAC1B,MAAI,CAAC,OAAO,SAAS,CAAC,GAAG;AACvB,WAAO;AAAA,EACT;AACA,SAAO,KAAK,IAAI,GAAG,KAAK,IAAI,KAAK,KAAK,MAAM,CAAC,CAAC,CAAC;AACjD;AAQO,SAAS,uBAAuB,KAAsB;AAC3D,QAAM,IAAI,aAAa,GAAG;AAC1B,MAAI,CAAC,OAAO,SAAS,CAAC,GAAG;AACvB,WAAO;AAAA,EACT;AACA,SAAO,KAAK,IAAI,GAAG,KAAK,IAAI,IAAI,KAAK,MAAM,CAAC,CAAC,CAAC,IAAI;AACpD;AASO,SAAS,sBAAsB,SAAiB,QAAgB,OAAuB;AAC5F,QAAM,IAAI,KAAK,IAAI,GAAG,KAAK,MAAM,OAAO,CAAC;AACzC,SAAO,KAAK,IAAI,SAAS,MAAM,IAAI,IAAI,KAAK;AAC9C;",
+  "names": []
+}

package/build/lib/i18n.js

@@ -0,0 +1,32 @@
+"use strict";
+var __defProp = Object.defineProperty;
+var __getOwnPropDesc = Object.getOwnPropertyDescriptor;
+var __getOwnPropNames = Object.getOwnPropertyNames;
+var __hasOwnProp = Object.prototype.hasOwnProperty;
+var __export = (target, all) => {
+  for (var name in all)
+    __defProp(target, name, { get: all[name], enumerable: true });
+};
+var __copyProps = (to, from, except, desc) => {
+  if (from && typeof from === "object" || typeof from === "function") {
+    for (let key of __getOwnPropNames(from))
+      if (!__hasOwnProp.call(to, key) && key !== except)
+        __defProp(to, key, { get: () => from[key], enumerable: !(desc = __getOwnPropDesc(from, key)) || desc.enumerable });
+  }
+  return to;
+};
+var __toCommonJS = (mod) => __copyProps(__defProp({}, "__esModule", { value: true }), mod);
+var i18n_exports = {};
+__export(i18n_exports, {
+  tName: () => tName
+});
+module.exports = __toCommonJS(i18n_exports);
+var import_adapter_core = require("@iobroker/adapter-core");
+function tName(key) {
+  return import_adapter_core.I18n.getTranslatedObject(key);
+}
+// Annotate the CommonJS export names for ESM import in node:
+0 && (module.exports = {
+  tName
+});
+//# sourceMappingURL=i18n.js.map

package/build/lib/i18n.js.map

@@ -0,0 +1,7 @@
+{
+  "version": 3,
+  "sources": ["../../src/lib/i18n.ts"],
+  "sourcesContent": ["import { I18n } from \"@iobroker/adapter-core\";\nimport type translations from \"../../admin/i18n/en.json\";\n\nexport type I18nKey = keyof typeof translations;\n\n/**\n * Resolve an admin/i18n key to a translation object for `common.name` / state labels.\n *\n * @param key Admin i18n key\n */\nexport function tName(key: I18nKey): ioBroker.StringOrTranslated {\n  return I18n.getTranslatedObject(key);\n}\n"],
+  "mappings": ";;;;;;;;;;;;;;;;;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,0BAAqB;AAUd,SAAS,MAAM,KAA2C;AAC/D,SAAO,yBAAK,oBAAoB,GAAG;AACrC;",
+  "names": []
+}

package/build/lib/message-router.js

@@ -0,0 +1,99 @@
+"use strict";
+var __defProp = Object.defineProperty;
+var __getOwnPropDesc = Object.getOwnPropertyDescriptor;
+var __getOwnPropNames = Object.getOwnPropertyNames;
+var __hasOwnProp = Object.prototype.hasOwnProperty;
+var __export = (target, all) => {
+  for (var name in all)
+    __defProp(target, name, { get: all[name], enumerable: true });
+};
+var __copyProps = (to, from, except, desc) => {
+  if (from && typeof from === "object" || typeof from === "function") {
+    for (let key of __getOwnPropNames(from))
+      if (!__hasOwnProp.call(to, key) && key !== except)
+        __defProp(to, key, { get: () => from[key], enumerable: !(desc = __getOwnPropDesc(from, key)) || desc.enumerable });
+  }
+  return to;
+};
+var __toCommonJS = (mod) => __copyProps(__defProp({}, "__esModule", { value: true }), mod);
+var message_router_exports = {};
+__export(message_router_exports, {
+  dispatchMessage: () => dispatchMessage,
+  makeTestClientFactory: () => makeTestClientFactory
+});
+module.exports = __toCommonJS(message_router_exports);
+var import_coerce = require("./coerce");
+function makeTestClientFactory(NutClientClass, logger) {
+  return (host, port, options) => new NutClientClass(host, port, { ...options, logger });
+}
+async function dispatchMessage(obj, deps) {
+  var _a, _b;
+  deps.log.debug(`onMessage: command='${obj == null ? void 0 : obj.command}' from='${obj == null ? void 0 : obj.from}' has-callback=${!!(obj == null ? void 0 : obj.callback)}`);
+  if (!obj.callback) {
+    return;
+  }
+  try {
+    switch (obj.command) {
+      case "checkConnection": {
+        const raw = obj.message;
+        const config = typeof raw === "object" && raw !== null && !Array.isArray(raw) ? raw : {};
+        const host = (0, import_coerce.coerceHost)(config.host);
+        if (!host) {
+          deps.log.debug("checkConnection: missing host in message");
+          deps.sendTo(obj.from, obj.command, { error: "Host is required" }, obj.callback);
+          return;
+        }
+        const port = (0, import_coerce.coercePort)(config.port);
+        const username = typeof config.username === "string" ? config.username : "";
+        const password = typeof config.password === "string" ? config.password : "";
+        const localAddress = (0, import_coerce.localAddressOf)(config.networkInterface);
+        const options = {
+          localAddress,
+          commandTimeout: (0, import_coerce.coerceCommandTimeoutMs)(config.commandTimeout),
+          useTls: !!config.useTls,
+          tlsRejectUnauthorized: !!config.tlsRejectUnauthorized
+        };
+        const testClient = deps.createTestClient(host, port, options);
+        (_a = deps.onTestClientCreated) == null ? void 0 : _a.call(deps, testClient);
+        try {
+          await testClient.connect();
+          const upsList = await testClient.listUps();
+          const names = upsList.map((u) => u.name).join(", ");
+          deps.log.debug(`checkConnection: found ${upsList.length} UPS(es): ${names}`);
+          if (username && password) {
+            await testClient.authenticate(username, password);
+            deps.sendTo(
+              obj.from,
+              obj.command,
+              { result: `Connected and authenticated \u2014 ${upsList.length} UPS(es): ${names}` },
+              obj.callback
+            );
+          } else {
+            deps.sendTo(
+              obj.from,
+              obj.command,
+              { result: `Connected \u2014 ${upsList.length} UPS(es): ${names}` },
+              obj.callback
+            );
+          }
+        } finally {
+          testClient.destroy();
+          (_b = deps.onTestClientDone) == null ? void 0 : _b.call(deps, testClient);
+        }
+        break;
+      }
+      default:
+        deps.log.debug(`onMessage: unknown command '${obj.command}'`);
+        deps.sendTo(obj.from, obj.command, { error: "Unknown command" }, obj.callback);
+    }
+  } catch (err) {
+    deps.log.debug(`onMessage: '${obj.command}' failed: ${(0, import_coerce.errText)(err)}`);
+    deps.sendTo(obj.from, obj.command, { error: (0, import_coerce.errText)(err) }, obj.callback);
+  }
+}
+// Annotate the CommonJS export names for ESM import in node:
+0 && (module.exports = {
+  dispatchMessage,
+  makeTestClientFactory
+});
+//# sourceMappingURL=message-router.js.map