ilabs-flir 2.0.3 → 2.0.5

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRStreamer.h

@@ -1,124 +0,0 @@
-//
-//  FLIRStreamer.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2021-10-12.
-//  Copyright © 2021 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-
-#import "FLIRRendererImpl.h"
-#import "FLIRColorizer.h"
-#import "FLIRCamera.h"
-
-@class FLIRStream;
-@class FLIRThermalImage;
-
-NS_ASSUME_NONNULL_BEGIN
-
-@class FLIRVividIRParameters;
-
-/**
- * Vivid IR upscale methods
- * chaning this will give faster response, but lower quality
- */
-typedef NS_ENUM(NSInteger, FLIRVividIRUpscale) {
-    /// Use superResolution for scaling (only available on FLIR One Pro models)
-    /// this is the default setting for FLIR One Pro
-    FLIRSuperResolution,
-    /// use trilateral scaling
-    /// this is default setting for FLIR One
-    FLIRTrilateral
-};
-
-/**
- * Vivid IR latency mode
- * chaning this will give faster response, but lower quality
- */
-typedef NS_ENUM(NSInteger, FLIRVividIRLatency) {
-    /// Use a latency of 2 frames for denoise
-    /// this is the default setting for FLIR One
-    FLIRLatencyHigh,
-    /// Use a latency of 0 frames for denoise (fastest)
-    FLIRLatencyLow
-};
-
-/**
- *  Streamer class
- */
-@interface FLIRStreamer : FLIRRendererImpl
-
-/**
- *  Get parameters for the VividIR filter
- *  Returns nil if this streamer doesn't use VividIR
- */
-@property (nonatomic, nullable, readonly) FLIRVividIRParameters* vividIRParameters;
-
-@end
-
-/**
- *  Streamer class for thermal data
- */
-@interface FLIRThermalStreamer : FLIRStreamer<FLIRColorizer>
-
-/**
- *  Create a thermal streamer on a stream
- *
- *  @param stream the stream to be streamed
- *
- *  The stream should contain thermal data. This will also contain a colorizer to provide a visual image
- *  from the thermal stream.
- */
-- (instancetype)initWithStream:(FLIRStream *)stream;
-
-/**
- *  Create a thermal streamer on a stream
- *
- *  @param stream the stream to be streamed
- *  @param streamingOptions options for streaming, currently the only option is STREAMING_NO_OPENGL
- *     which creates a pipeline using only CPU filters, avoiding openGL rendering
- *
- *  The stream should contain thermal data. This will also contain a colorizer to provide a visual image
- *  from the thermal stream.
- */
-- (instancetype)initWithStream:(FLIRStream *)stream options: (StreamingOptions)streamingOptions;
-
-/**
- *  call a function with a @ref FLIRThermalImage from the stream
- *
- *  @param imageBlock a block with an image parameter
- */
-- (void)withThermalImage:(void (^)(FLIRThermalImage *))imageBlock;
-
-
-@end
-
-@interface FLIRVividIRParameters : NSObject
-
-
-/// Upscale method used, superresolution is only available on FLIR One Pro models
-@property (nonatomic, assign) FLIRVividIRUpscale upscale;
-/// Latency for denoise
-@property (nonatomic, assign) FLIRVividIRLatency latency;
-/// Denoise filters enabled
-@property (nonatomic, assign) BOOL useDenoise;
-
-@end
-
-/**
- *  Streamer class for visual data
- */
-@interface FLIRVisualStreamer : FLIRStreamer
-/**
- *  Create a visual streamer on a stream
- *
- *  @param stream the stream to be streamed
- *
- *  The stream should contain visual data.
- */
-- (instancetype)initWithStream:(FLIRStream *)stream;
-
-@end
-
-NS_ASSUME_NONNULL_END

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRSystem.h

@@ -1,40 +0,0 @@
-//
-//  FLIRSystem.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2020-07-02.
-//  Copyright © 2020 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-
-/** system parameters for the camera */
-@interface FLIRSystem : NSObject
-
-/** get the a flag indicating the system is running */
-- (BOOL) getSystemUp;
-/** get the date and time for the camera */
-- (NSDateComponents* _Nullable)getTime;
-/** get the time zone name for the camera */
-- (NSString* _Nullable)getTimeZoneName;
-/// Set the date and time for the camera.
-/// - Parameter dateComponents: Required components: year, month, day, hour, minute, second and calendar.
-///
-/// The given components are used to set the camera's date and time.
-/// > Note: Timezone is ignored; it's set by ``setTimeZoneName:error:``.  Some cameras set seconds to 0.
-- (BOOL)setTime:(NSDateComponents* _Nonnull)dateComponents error:(out NSError * _Nullable *_Nullable)error;
-/// Set the time zone name for the camera.
-/// > Note: not all cameras support this.
-- (BOOL)setTimeZoneName:(NSString* _Nonnull)timeZoneName error:(out NSError * _Nullable *_Nullable)error;
-/// Get a list of available time zones
-- (NSArray<NSString *>* _Nullable)getAvailableTimeZones:(out NSError * _Nullable *_Nullable)error;
-
-- (BOOL)setWiFiSSID:(NSString * _Nonnull)ssid;
-
-@property (nonatomic, readonly) NSUInteger capacityKBytes;
-@property (nonatomic, readonly) NSUInteger freeKBytes;
-@property (nonatomic) BOOL isTorchOn;
-
-- (void) reboot;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRTemperatureRange.h

@@ -1,43 +0,0 @@
-//
-//  FLIRTemperatureRange.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2020-07-02.
-//  Copyright © 2020 Teledyne FLIR. All rights reserved.
-//
-
-@class FLIRThermalValue;
-
-/** a temperature range for a camera */
-@interface FLIRRange : NSObject
-
-/** lowest thermal value */
-@property (nonatomic, retain) FLIRThermalValue* _Nonnull min;
-/** highest thermal value */
-@property (nonatomic, retain) FLIRThermalValue* _Nonnull max;
-
-@end
-
-
-@interface FLIRTemperatureRange : NSObject
-
-/** get all available ranges */
-- (NSArray<FLIRRange*>* _Nullable) getRanges;
-/** get the range used */
-- (int)getSelectedIndex;
-/** 
- * Set the range used.
- * When 'selectedIndex' is being set on the network camera, the camera responds with a success, but it asynchronously sets itself up.
- * In consequence, the success response doesn't necessarily mean the camera is done with changing the setting.
- * This means that reading the 'selectedIndex' will return the old value for a short while, until the camera sets everything up internally.
- * It is up to the developer to subscribe if it is required.
- * When 'selectedIndex' is being set on the FLIR ONE camera, in order to properly reflect new value in 'image.CameraInformation'
- * the streaming must be started prior to setting the value and also 'FLIRThermalImage.getImage()' needs to be called.
- */
-- (BOOL)setSelectedIndex: (int)selectedIndex error: (out NSError * _Nullable *_Nullable)error;
-/** Subscribes for selected temperature range notifications. */
-- (BOOL)subscribeSelectedIndex: (out NSError * _Nullable *_Nullable) error;
-/** Revokes subscription for selected temperature range. */
-- (void)unsubscribeSelectedIndex;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRThermalDelta.h

@@ -1,77 +0,0 @@
-//
-//  FLIRThermalDelta.h
-//  FLIR Thermal SDK
-//
-//  Copyright © 2020 Teledyne FLIR. All rights reserved.
-//
-
-#pragma once
-#import <Foundation/Foundation.h>
-#import "FLIRThermalValue.h"
-
-// should match atlas::image::measurements::DeltaMemberValueType
-
-/**
- *  Defines delta member value type.
- */
-typedef NS_ENUM(NSUInteger, DeltaMemberValueType) {
-    /**  Min marker value for the specified member type.
-     *   Valid for member types: rectangle, ellipse, line.
-     */
-    typeMin,
-    /**  Max marker value for the specified member type.
-     *   Valid for member types: rectangle, ellipse, line.
-     */
-    typeMax,
-    /**  Average value for the specified member type.
-     *   Valid for member types: rectangle, ellipse, line.
-     */
-    typeAvg,
-    /**  Arbitrary value.
-     *   Valid for member types: spot, reference temperature.
-     */
-    typeValue
-};
-
-/**
- * Represents an Thermal delta with additional state information. It is used to obtain Thermal data
- * from a ThermalImage or any MeasurementShape added to the image.
- */
-@interface FLIRThermalDelta : NSObject
-
-/**
- * Initialize a thermal delta value with specified temperature difference and unit (useful for tests)
- *
- * @param value Temperature difference.
- * @param unit Temperature unit.
- */
-- (instancetype)initWithValue:(double) value andUnit:(TemperatureUnit) unit;
-
-/**
- *  Gets the difference/delta value.
- */
-@property (readonly, nonatomic) double value;
-
-/**
- *  Gets the temperature unit.
- */
-@property (readonly, nonatomic) TemperatureUnit unit;
-
-/**
- *  Gets the state of the value.
- */
-@property (readonly, nonatomic) ThermalValueState state;
-
-/**
- *  Gets a formatted string representing the value.
- */
-- (NSString *)description;
-
-/**
- *  Convenience function to test if two FLIRThermalDelta have the same temperature difference with imprecise floating-point comparison.
- *  @param other The second (right hand side) value to compare.
- *  @param absError The margin of error in degrees Kelvin.
- */
-- (BOOL)areNear:(id)other absError: (double)absError;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRThermalImage.h

@@ -1,331 +0,0 @@
-//
-//  FLIRThermalImage.h
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#pragma once
-
-#import "FLIRImageBase.h"
-#import "FLIRMeasurementCollection.h"
-#import "FLIRPaletteManager.h"
-#import "FLIRThermalParameters.h"
-#import "FLIRImageStatistics.h"
-#import "FLIRFusion.h"
-#import "FLIRScale.h"
-#import "FLIRThermalValue.h"
-#import "FLIRDisplaySettings.h"
-#import "FLIRMeterLinkSensorPoll.h"
-#import "FLIRIsotherms.h"
-#import "FLIRColorDistributionSettings.h"
-#import "FLIRIdentity.h"
-#import "FLIRQuantification.h"
-
-/**
- *  Specifies the color distribution of the thermal image.
- */
-typedef enum ColorDistribution_type
-{
-    /**
-     *  This is an image-displaying method that distributes the colors according to temperature.
-     */
-    TemperatureLinear,
-    /**
-     *  This is an image-displaying method that evenly distributes the color information over 
-     *  the existing temperatures of the image. This method to distribute the information can be particularly
-     *  successful when the image contains few peaks of very high temperature values.
-     */
-    HistogramEqualization
-
-} /** Specifies the color distribution of the thermal image. */ ColorDistribution;
-
-/**
- *  Holds information about the camera used to create the Thermal image.
- *  Provides an information about a camera device, like serial number, model, lens type/name.
- *  All information given is as written by the camera. For extra information, refer to the user manual of the camera.
- */
-@interface CameraInfo : NSObject
-/**  The camera filter information. */
-@property (nonatomic, readonly, nonnull) NSString *filter;
-
-/**  The camera lens information. */
-@property (nonatomic, readonly, nonnull) NSString *lens;
-
-/**  The camera model information. */
-@property (nonatomic, readonly, nonnull) NSString *modelName;
-
-/**  The camera serial number information. */
-@property (nonatomic, readonly, nonnull) NSString *serialNumber;
-
-/// The program version
-@property (nonatomic, readonly, nonnull) NSString* progVer;
-
-/// The camera article number
-@property (nonatomic, readonly, nonnull) NSString* articleNumber;
-
-/// flir one type (only valid for flir one cameras)
-@property (nonatomic, readonly) FLIROneType flirOneType;
-
-/**
- *  The lower limit of the camera's measurement range.
- *  Note that there are some preconditions/limits related to camera's measurement range, when using remote API 'TemperatureRange.selectedIndex()'.
- */
-@property (nonatomic, readonly, nonnull) FLIRThermalValue *rangeMin;
-
-/**  
- *  The upper limit of the camera's measurement range.
- *  Note that there are some preconditions/limits related to camera's measurement range, when using remote API 'TemperatureRange.selectedIndex()'.
- */
-@property (nonatomic, readonly, nonnull) FLIRThermalValue *rangeMax;
-
-/// Calibration information
-@property (nonatomic, readonly, nonnull) NSString* calibrationTitle;
-@property (nonatomic, readonly, nonnull) NSString* lensSerialNumber;
-@property (nonatomic, readonly, nonnull) NSString* arcVersion;
-@property (nonatomic, readonly, nonnull) NSString* arcDate;
-@property (nonatomic, readonly, nonnull) NSString* arcSignature;
-@property (nonatomic, readonly, nonnull) NSString* countryCode;
-@property (nonatomic, readonly) NSInteger horizontalFoV;
-@property (nonatomic, readonly) float focalLength;
-
-@end
-
-
-
-/** Specifies the supported distance units. */
-typedef NS_ENUM(NSUInteger, DistanceUnit)
-{
-    /** The metre or meter is the fundamental unit of length in the International System of Units. */
-    METER,
-    /** International foot (equal to 0.3048 meters). */
-    FEET
-};
-
-/**
- * Defines text annotations that can be stored with the Thermal image
- */
-@interface FLIRTextAnnotation : NSObject
-@property (nonatomic, nonnull) NSString* first DEPRECATED_MSG_ATTRIBUTE("Use label instead, this property will be removed.");
-@property (nonatomic, nonnull) NSString* second DEPRECATED_MSG_ATTRIBUTE("Use value instead, this property will be removed.");
-
-@property (nonatomic, nonnull) NSString* label;
-@property (nonatomic, nonnull) NSString* value;
-
-- (instancetype _Nonnull)initWithLabel:(NSString * _Nonnull)label value:(NSString * _Nonnull)value;
-
-@end
-
-/**
- *  Defines features of a Thermal image created from file or stream with temperature (radiometric) data.
- *  The object of this class can be obtained from Thermal cameras supporting such streaming mode.
- *  There is also a specialized subclass for handling Thermal data stored in files. The ThermalImageFile should be used for them.
- */
-@interface FLIRThermalImage : FLIRImageBase
-
-/** The measurements collection. */
-@property (nonatomic, readonly, nullable) FLIRMeasurementCollection *Measurements;
-
-/** The palette manager. */
-@property (nonatomic, readonly, nullable) FLIRPaletteManager *PaletteManager;
-
-/** Gets a Palette object set for this image. */
-@property (nonatomic, readwrite, nullable) FLIRPalette *Palette;
-
-/**
- *  Gets an ThermalParameters object for this instance.
- */
-- (FLIRThermalParameters * _Nullable)getThermalParameters;
-
-/**
- *  A list of external sensor poll values
- *
- *  @return  arrayf of @ref FLIRMeterLinkSensorPoll FLIRMeterLinkSensorPoll
- */
-- (NSArray<FLIRMeterLinkSensorPoll *> * _Nonnull)getExternalSensorPolls;
-
-/**
- *  Gets a UIImage object, which represents an image's colorized pixels data depending on selected FusionMode.
- *  Rendered/colorized image, which size, appearance etc. heavily depends on the FusionMode.
- *  Note: raw IR and DC pixels are used to generate this image (depending on fusion mode), and DC image will be aligned even in FusionMode#VISUAL_MODE mode.
- *
- *  @return An UIImage representing the thermal image.
- */
-- (UIImage * _Nullable)getImage DEPRECATED_MSG_ATTRIBUTE("This call will be removed, use FLIRImageColorizer (still images) or FLIRThermalStreamer (live streams) instead");
-
-/**
- *  Gets an ImageStatistics object providing the statistics for Thermal data.
- *
- *  @return The image statistics in a FLIRImageStatistics object
- */
-- (FLIRImageStatistics * _Nullable)getImageStatistics;
-
-/**
- *  Gets the scale object.
- *
- *  @return The image scale as FLIRScale object
- */
-- (FLIRScale * _Nullable)getScale;
-
-/**
- *  Gets a Fusion object set for this image.
- *
- *  @return The image fusion as a FLIRFusion object
- */
--(FLIRFusion * _Nullable)getFusion;
-
-/**
- *  Gets the thermal image color distribution.
- *
- *  @return The color distribution.
- */
-- (ColorDistribution)getColorDistribution DEPRECATED_MSG_ATTRIBUTE("This call will be removed, use getColorDistributionSettings instead");
-
-/**
- *  Sets the thermal image color distribution.
- *
- *  @param value The color distribution.
- */
-- (void)setColorDistribution:(ColorDistribution)value;
-
-/**
- *  Gets a {@link FLIRColorDistributionSettings} for the image.
- */
-- (FLIRColorDistributionSettings * _Nonnull)getColorDistributionSettings;
-
-/**
- *  Sets the {@link FLIRColorDistributionSettings} for the image.
- */
-- (void)setColorDistributionSettings: (FLIRColorDistributionSettings * _Nonnull)settings;
-
-/**
- * Gets the CameraInformation describing the device the image was taken with.
- *
- * @return CameraInformation_t
- */
--(CameraInfo * _Nullable)getCameraInformation;
-
-/**
- * Return display settings, with information on pan and zoom
- */
-- (FLIRDisplaySettings * _Nullable)getDisplaySettings;
-
-/**
- * Set display settings, with information on pan and zoom
- */
-- (BOOL)setDisplaySettings:(FLIRDisplaySettings * _Nonnull)displaySettings error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Gets a DistanceUnit used to define any distance parameter related with image.
- *
- *  @return DistanceUnit
- */
--(DistanceUnit) getDistanceUnit;
-
-
-/**
- *  Gets a visual image (photo), which is not fusion aligned, as a UIImage extracted from the file.
- *  Raw visual pixels/"photo"/"DC", usually in YCbCr format.
- *  These are only available if the thermal image was created with fusion data and visual pixel data.
- *  These pixels are not aligned to the IR pixels.
- */
-- (UIImage * _Nullable)getPhoto;
-
-
-/**
- *  Gets a TemperatureUnit the ThermalValues are in.
- */
--(TemperatureUnit) getTemperatureUnit;
-
-
-/**
- *  Gets a text annotations associated with the file.
-
- @return array with annotations
- */
-- (NSArray<FLIRTextAnnotation *> * _Nullable)getTextAnnotations:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Sets a text annotations associated with the file.
-
- @param annotations array with annotations
- */
-- (BOOL)setTextAnnotations:(NSArray<FLIRTextAnnotation *> * _Nonnull)annotations error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Gets a temperature value from a point(x,y) in the Thermal Image.
- 
- *  Due to Lepton thermal camera core specifics, reading a value from a single point may be inaccurate.
- *  Thus this is recommended to use a measurement spot instead, where value calculation is internally compensated based on a several adjacent points and calibration data.
- *
- *  @param point the pixel coordinate
- *  @return temperature value
- */
--(FLIRThermalValue * _Nullable) getValueAt:(CGPoint) point error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Gets temperature values from a list of points(x,y) in the Thermal Image.
- *
- *  @param points array with pixel coordinates, given as NSValue wrapping CGPoint
- *
- *  @return array with temperature values, given as NSNumber wrapping double with Kelvin value
- */
--(NSArray<NSNumber *> * _Nullable)getValues:(NSArray<NSValue *> * _Nonnull)points error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Gets temperature values from a list of points(x,y) in the Thermal Image.
- *
- *  @param rectangle a rectangular area within the thermal image
- *
- *  @return array with temperature values, given as NSNumber wrapping double with Kelvin value
- */
--(NSArray<NSNumber *> * _Nullable)getValuesFromRectangle:(CGRect)rectangle error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Sets a DistanceUnit used to define any distance parameter related with image.
- *
- */
--(void) setDistanceUnit:(DistanceUnit) value;
-
-
-/**
- *  Sets a TemperatureUnit the ThermalValues are in.
- */
--(void) setTemperatureUnit:(TemperatureUnit) value;
-
-/**
- *  Saves a thermal image to file.
- *
- *  @param fileName  Path to file.
- *  @param overlay   The UIImageView with ovelay and the thermal image.
- */
-- (BOOL)saveAs:(NSString * _Nonnull)fileName imageViewWithOverlay:(UIImageView * _Nonnull)overlay error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Saves a thermal image to file.
- *
- *  @param fileName  Path to file.
- *  @param imageWithOverlay   The UIImage with ovelay and the thermal image.
- */
-- (BOOL)saveAs:(NSString * _Nonnull)fileName imageWithOverlay:(UIImage * _Nonnull)imageWithOverlay error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Saves a thermal image to file.
- *
- *  @param fileName  Path to file.
- */
-- (BOOL)saveAs:(NSString * _Nonnull)fileName error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Gets a date when the image was taken.
- */
-- (NSDate * _Nullable)getDateTaken;
-
-/** @brief Gets the isotherms collection. */
-- (FLIRIsotherms * _Nonnull)getIsotherms;
-
-/// gas quantification input, nil if image does not contain gas quantification input data
-@property (nonatomic, nullable, readonly) FLIRGasQuantificationInput* gasQuantificationInput;
-/// gas quantification result
-@property (nonatomic, nullable, readonly) FLIRGasQuantificationResult* gasQuantificationResult;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64_x86_64-simulator/ThermalSDK.framework/Headers/FLIRThermalImageFile.h

@@ -1,56 +0,0 @@
-//
-//  FLIRThermalImageFile.h
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#ifndef FLIRThermalImageFile_h
-#define FLIRThermalImageFile_h
-#endif 
-
-#import "FLIRThermalImage.h"
-
-/**
- *  Describes a file on the physical file system, which contains a ThermalImage.
- *  Moreover it contains additional data, which helps to analyze and interpret the image.
- */
-@interface FLIRThermalImageFile : FLIRThermalImage
-
-/**
- *  Opens an thermal image from the specified file.
- *
- *  @param fileName Path to file.
- *  @return 0 if image was opened -1 if failed
- */
-- (int)open:(NSString * _Nonnull)fileName;
-
-/**
- *  Check if the file contains thermal data.
- *
- *  @param fileName  Path to file.
- */
--(BOOL)isThermalImage:(NSString * _Nonnull)fileName;
-
-
-/**
- *  Gets an absolute path to the file this image was loaded from.
- */
--(NSString * _Nonnull) getAbsolutePath;
-
-
-/**
- *  Gets an opened file's name.
- */
-- (NSString * _Nonnull)getFileName;
-
-
-/**
- *  Saves current object to file.
- */
-- (BOOL)save:(out NSError * _Nullable * _Nullable)error;
-
-@end
-
-
-
-