ilabs-flir 2.0.1 → 2.0.4

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRThermalImage.h

@@ -1,331 +0,0 @@
-//
-//  FLIRThermalImage.h
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#pragma once
-
-#import "FLIRImageBase.h"
-#import "FLIRMeasurementCollection.h"
-#import "FLIRPaletteManager.h"
-#import "FLIRThermalParameters.h"
-#import "FLIRImageStatistics.h"
-#import "FLIRFusion.h"
-#import "FLIRScale.h"
-#import "FLIRThermalValue.h"
-#import "FLIRDisplaySettings.h"
-#import "FLIRMeterLinkSensorPoll.h"
-#import "FLIRIsotherms.h"
-#import "FLIRColorDistributionSettings.h"
-#import "FLIRIdentity.h"
-#import "FLIRQuantification.h"
-
-/**
- *  Specifies the color distribution of the thermal image.
- */
-typedef enum ColorDistribution_type
-{
-    /**
-     *  This is an image-displaying method that distributes the colors according to temperature.
-     */
-    TemperatureLinear,
-    /**
-     *  This is an image-displaying method that evenly distributes the color information over 
-     *  the existing temperatures of the image. This method to distribute the information can be particularly
-     *  successful when the image contains few peaks of very high temperature values.
-     */
-    HistogramEqualization
-
-} /** Specifies the color distribution of the thermal image. */ ColorDistribution;
-
-/**
- *  Holds information about the camera used to create the Thermal image.
- *  Provides an information about a camera device, like serial number, model, lens type/name.
- *  All information given is as written by the camera. For extra information, refer to the user manual of the camera.
- */
-@interface CameraInfo : NSObject
-/**  The camera filter information. */
-@property (nonatomic, readonly, nonnull) NSString *filter;
-
-/**  The camera lens information. */
-@property (nonatomic, readonly, nonnull) NSString *lens;
-
-/**  The camera model information. */
-@property (nonatomic, readonly, nonnull) NSString *modelName;
-
-/**  The camera serial number information. */
-@property (nonatomic, readonly, nonnull) NSString *serialNumber;
-
-/// The program version
-@property (nonatomic, readonly, nonnull) NSString* progVer;
-
-/// The camera article number
-@property (nonatomic, readonly, nonnull) NSString* articleNumber;
-
-/// flir one type (only valid for flir one cameras)
-@property (nonatomic, readonly) FLIROneType flirOneType;
-
-/**
- *  The lower limit of the camera's measurement range.
- *  Note that there are some preconditions/limits related to camera's measurement range, when using remote API 'TemperatureRange.selectedIndex()'.
- */
-@property (nonatomic, readonly, nonnull) FLIRThermalValue *rangeMin;
-
-/**  
- *  The upper limit of the camera's measurement range.
- *  Note that there are some preconditions/limits related to camera's measurement range, when using remote API 'TemperatureRange.selectedIndex()'.
- */
-@property (nonatomic, readonly, nonnull) FLIRThermalValue *rangeMax;
-
-/// Calibration information
-@property (nonatomic, readonly, nonnull) NSString* calibrationTitle;
-@property (nonatomic, readonly, nonnull) NSString* lensSerialNumber;
-@property (nonatomic, readonly, nonnull) NSString* arcVersion;
-@property (nonatomic, readonly, nonnull) NSString* arcDate;
-@property (nonatomic, readonly, nonnull) NSString* arcSignature;
-@property (nonatomic, readonly, nonnull) NSString* countryCode;
-@property (nonatomic, readonly) NSInteger horizontalFoV;
-@property (nonatomic, readonly) float focalLength;
-
-@end
-
-
-
-/** Specifies the supported distance units. */
-typedef NS_ENUM(NSUInteger, DistanceUnit)
-{
-    /** The metre or meter is the fundamental unit of length in the International System of Units. */
-    METER,
-    /** International foot (equal to 0.3048 meters). */
-    FEET
-};
-
-/**
- * Defines text annotations that can be stored with the Thermal image
- */
-@interface FLIRTextAnnotation : NSObject
-@property (nonatomic, nonnull) NSString* first DEPRECATED_MSG_ATTRIBUTE("Use label instead, this property will be removed.");
-@property (nonatomic, nonnull) NSString* second DEPRECATED_MSG_ATTRIBUTE("Use value instead, this property will be removed.");
-
-@property (nonatomic, nonnull) NSString* label;
-@property (nonatomic, nonnull) NSString* value;
-
-- (instancetype _Nonnull)initWithLabel:(NSString * _Nonnull)label value:(NSString * _Nonnull)value;
-
-@end
-
-/**
- *  Defines features of a Thermal image created from file or stream with temperature (radiometric) data.
- *  The object of this class can be obtained from Thermal cameras supporting such streaming mode.
- *  There is also a specialized subclass for handling Thermal data stored in files. The ThermalImageFile should be used for them.
- */
-@interface FLIRThermalImage : FLIRImageBase
-
-/** The measurements collection. */
-@property (nonatomic, readonly, nullable) FLIRMeasurementCollection *Measurements;
-
-/** The palette manager. */
-@property (nonatomic, readonly, nullable) FLIRPaletteManager *PaletteManager;
-
-/** Gets a Palette object set for this image. */
-@property (nonatomic, readwrite, nullable) FLIRPalette *Palette;
-
-/**
- *  Gets an ThermalParameters object for this instance.
- */
-- (FLIRThermalParameters * _Nullable)getThermalParameters;
-
-/**
- *  A list of external sensor poll values
- *
- *  @return  arrayf of @ref FLIRMeterLinkSensorPoll FLIRMeterLinkSensorPoll
- */
-- (NSArray<FLIRMeterLinkSensorPoll *> * _Nonnull)getExternalSensorPolls;
-
-/**
- *  Gets a UIImage object, which represents an image's colorized pixels data depending on selected FusionMode.
- *  Rendered/colorized image, which size, appearance etc. heavily depends on the FusionMode.
- *  Note: raw IR and DC pixels are used to generate this image (depending on fusion mode), and DC image will be aligned even in FusionMode#VISUAL_MODE mode.
- *
- *  @return An UIImage representing the thermal image.
- */
-- (UIImage * _Nullable)getImage DEPRECATED_MSG_ATTRIBUTE("This call will be removed, use FLIRImageColorizer (still images) or FLIRThermalStreamer (live streams) instead");
-
-/**
- *  Gets an ImageStatistics object providing the statistics for Thermal data.
- *
- *  @return The image statistics in a FLIRImageStatistics object
- */
-- (FLIRImageStatistics * _Nullable)getImageStatistics;
-
-/**
- *  Gets the scale object.
- *
- *  @return The image scale as FLIRScale object
- */
-- (FLIRScale * _Nullable)getScale;
-
-/**
- *  Gets a Fusion object set for this image.
- *
- *  @return The image fusion as a FLIRFusion object
- */
--(FLIRFusion * _Nullable)getFusion;
-
-/**
- *  Gets the thermal image color distribution.
- *
- *  @return The color distribution.
- */
-- (ColorDistribution)getColorDistribution DEPRECATED_MSG_ATTRIBUTE("This call will be removed, use getColorDistributionSettings instead");
-
-/**
- *  Sets the thermal image color distribution.
- *
- *  @param value The color distribution.
- */
-- (void)setColorDistribution:(ColorDistribution)value;
-
-/**
- *  Gets a {@link FLIRColorDistributionSettings} for the image.
- */
-- (FLIRColorDistributionSettings * _Nonnull)getColorDistributionSettings;
-
-/**
- *  Sets the {@link FLIRColorDistributionSettings} for the image.
- */
-- (void)setColorDistributionSettings: (FLIRColorDistributionSettings * _Nonnull)settings;
-
-/**
- * Gets the CameraInformation describing the device the image was taken with.
- *
- * @return CameraInformation_t
- */
--(CameraInfo * _Nullable)getCameraInformation;
-
-/**
- * Return display settings, with information on pan and zoom
- */
-- (FLIRDisplaySettings * _Nullable)getDisplaySettings;
-
-/**
- * Set display settings, with information on pan and zoom
- */
-- (BOOL)setDisplaySettings:(FLIRDisplaySettings * _Nonnull)displaySettings error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Gets a DistanceUnit used to define any distance parameter related with image.
- *
- *  @return DistanceUnit
- */
--(DistanceUnit) getDistanceUnit;
-
-
-/**
- *  Gets a visual image (photo), which is not fusion aligned, as a UIImage extracted from the file.
- *  Raw visual pixels/"photo"/"DC", usually in YCbCr format.
- *  These are only available if the thermal image was created with fusion data and visual pixel data.
- *  These pixels are not aligned to the IR pixels.
- */
-- (UIImage * _Nullable)getPhoto;
-
-
-/**
- *  Gets a TemperatureUnit the ThermalValues are in.
- */
--(TemperatureUnit) getTemperatureUnit;
-
-
-/**
- *  Gets a text annotations associated with the file.
-
- @return array with annotations
- */
-- (NSArray<FLIRTextAnnotation *> * _Nullable)getTextAnnotations:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Sets a text annotations associated with the file.
-
- @param annotations array with annotations
- */
-- (BOOL)setTextAnnotations:(NSArray<FLIRTextAnnotation *> * _Nonnull)annotations error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Gets a temperature value from a point(x,y) in the Thermal Image.
- 
- *  Due to Lepton thermal camera core specifics, reading a value from a single point may be inaccurate.
- *  Thus this is recommended to use a measurement spot instead, where value calculation is internally compensated based on a several adjacent points and calibration data.
- *
- *  @param point the pixel coordinate
- *  @return temperature value
- */
--(FLIRThermalValue * _Nullable) getValueAt:(CGPoint) point error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Gets temperature values from a list of points(x,y) in the Thermal Image.
- *
- *  @param points array with pixel coordinates, given as NSValue wrapping CGPoint
- *
- *  @return array with temperature values, given as NSNumber wrapping double with Kelvin value
- */
--(NSArray<NSNumber *> * _Nullable)getValues:(NSArray<NSValue *> * _Nonnull)points error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Gets temperature values from a list of points(x,y) in the Thermal Image.
- *
- *  @param rectangle a rectangular area within the thermal image
- *
- *  @return array with temperature values, given as NSNumber wrapping double with Kelvin value
- */
--(NSArray<NSNumber *> * _Nullable)getValuesFromRectangle:(CGRect)rectangle error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Sets a DistanceUnit used to define any distance parameter related with image.
- *
- */
--(void) setDistanceUnit:(DistanceUnit) value;
-
-
-/**
- *  Sets a TemperatureUnit the ThermalValues are in.
- */
--(void) setTemperatureUnit:(TemperatureUnit) value;
-
-/**
- *  Saves a thermal image to file.
- *
- *  @param fileName  Path to file.
- *  @param overlay   The UIImageView with ovelay and the thermal image.
- */
-- (BOOL)saveAs:(NSString * _Nonnull)fileName imageViewWithOverlay:(UIImageView * _Nonnull)overlay error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Saves a thermal image to file.
- *
- *  @param fileName  Path to file.
- *  @param imageWithOverlay   The UIImage with ovelay and the thermal image.
- */
-- (BOOL)saveAs:(NSString * _Nonnull)fileName imageWithOverlay:(UIImage * _Nonnull)imageWithOverlay error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Saves a thermal image to file.
- *
- *  @param fileName  Path to file.
- */
-- (BOOL)saveAs:(NSString * _Nonnull)fileName error:(out NSError * _Nullable * _Nullable)error;
-
-/**
- *  Gets a date when the image was taken.
- */
-- (NSDate * _Nullable)getDateTaken;
-
-/** @brief Gets the isotherms collection. */
-- (FLIRIsotherms * _Nonnull)getIsotherms;
-
-/// gas quantification input, nil if image does not contain gas quantification input data
-@property (nonatomic, nullable, readonly) FLIRGasQuantificationInput* gasQuantificationInput;
-/// gas quantification result
-@property (nonatomic, nullable, readonly) FLIRGasQuantificationResult* gasQuantificationResult;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRThermalImageFile.h

@@ -1,56 +0,0 @@
-//
-//  FLIRThermalImageFile.h
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#ifndef FLIRThermalImageFile_h
-#define FLIRThermalImageFile_h
-#endif 
-
-#import "FLIRThermalImage.h"
-
-/**
- *  Describes a file on the physical file system, which contains a ThermalImage.
- *  Moreover it contains additional data, which helps to analyze and interpret the image.
- */
-@interface FLIRThermalImageFile : FLIRThermalImage
-
-/**
- *  Opens an thermal image from the specified file.
- *
- *  @param fileName Path to file.
- *  @return 0 if image was opened -1 if failed
- */
-- (int)open:(NSString * _Nonnull)fileName;
-
-/**
- *  Check if the file contains thermal data.
- *
- *  @param fileName  Path to file.
- */
--(BOOL)isThermalImage:(NSString * _Nonnull)fileName;
-
-
-/**
- *  Gets an absolute path to the file this image was loaded from.
- */
--(NSString * _Nonnull) getAbsolutePath;
-
-
-/**
- *  Gets an opened file's name.
- */
-- (NSString * _Nonnull)getFileName;
-
-
-/**
- *  Saves current object to file.
- */
-- (BOOL)save:(out NSError * _Nullable * _Nullable)error;
-
-@end
-
-
-
-

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRThermalParameters.h

@@ -1,31 +0,0 @@
-//
-//  FLIRThermalParameters.h
-//  FLIR Thermal SDK
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-#import "FLIRThermalValue.h"
-
-/** FLIRThermalParameters */
-@interface FLIRThermalParameters : NSObject
-
-/** Gets or sets the default emissivity for the IR Image. */
-@property (nonatomic, readwrite) float objectEmissivity;
-/** Gets or sets the distance from camera to focused object. */
-@property (nonatomic, readwrite) float objectDistance;
-/** Gets or sets the reflected temperature. */
-@property (nonatomic, readwrite, nonnull) FLIRThermalValue* objectReflectedTemperature;
-/** Gets or sets the atmospheric temperature. */
-@property (nonatomic, readwrite, nonnull) FLIRThermalValue* atmosphericTemperature;
-/** Gets or sets the external optics temperature. */
-@property (nonatomic, readwrite, nonnull) FLIRThermalValue* externalOpticsTemperature;
-/** Gets or sets the external optics transmission. */
-@property (nonatomic, readwrite) float externalOpticsTransmission;
-/** Gets or sets the atmospheric transmission. */
-@property (nonatomic, readwrite) float atmosphericTransmission;
-/** Gets or sets the relative humidity (0.0 - 100.0). */
-@property (nonatomic, readwrite) float relativeHumidity;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRThermalValue.h

@@ -1,92 +0,0 @@
-//
-//  ThermalValue.h
-//  FLIR Thermal SDK
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-
-/**  Specifies the supported temperature units. */
-typedef NS_ENUM(NSUInteger, TemperatureUnit)
-{
-    /** The Celsius temperature scale was previously known as the centigrade scale. */
-    CELSIUS,
-    /** Units in Fahrenheit. */
-    FAHRENHEIT,
-    /** The Kelvin scale is a thermodynamic (absolute) temperature scale where absolute zero, the theoretical absence of all thermal energy, is zero (0 K). */
-    KELVIN
-};
-
-/**
- *  The possible ThermalValueStates.
- */
-typedef NS_ENUM(NSUInteger, ThermalValueState) {
-    /** Value is invalid. Usually happens when calculation mask for the particular measure type (i.e. min, max, average) is not enabled. */
-    Invalid,
-    /** Value is OK. */
-    Ok,
-    /** Value is too high. */
-    Overflow,
-    /** Value is too low. */
-    Underflow,
-    /** Value is outside image. */
-    Outside,
-    /** Value is unreliable. */
-    Warning,
-    /** Value is not yet calculated, unstable image after restart/case change. */
-    Unstable,
-    /** Value is OK + compensated with a reference temperature delta. */
-    Delta,
-}; // ThermalValueState;
-
-/**
- *  This class represents an IR value with additional information.
- */
-@interface FLIRThermalValue : NSObject
-
-/**
- * Initialize an "OK" thermal value with specified temperature value and unit
- *
- * @param value Temperature value.
- * @param unit Temperature unit.
- */
-- (instancetype)initWithValue:(double) value andUnit:(TemperatureUnit) unit;
-
-/**
- *  Gets the value.
- */
-@property (readonly) double value;
-
-/**
- *  Gets the temperature unit of the value.
- */
-@property (readonly) TemperatureUnit unit;
-
-/**
- *  Gets the state of the value.
- */
-@property (readonly) ThermalValueState state;
-
-/**
- *  Gets a nicely formatted string representing the value.
- */
-- (NSString *)description;
-
-/** @brief Convenience function to test if two @ref FLIRThermalValue "ThermalValues" practically the same temperature with imprecise floating-point comparison.
- *  @param other The second (right hand side) value to compare.
- *  @param absError The margin of error in degrees Kelvin.
- */
-- (BOOL)areNear:(id)other absError: (double)absError;
-
-/** @brief Return the corresponding thermal value in another unit */
-- (FLIRThermalValue*)asCelsius;
-
-/** @brief Return the corresponding thermal value in another unit */
-- (FLIRThermalValue*)asKelvin;
-
-/** @brief Return the corresponding thermal value in another unit */
-- (FLIRThermalValue*)asFahrenheit;
-
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRWirelessCameraDetails.h

@@ -1,88 +0,0 @@
-//
-//  FLIRWirelessCameraDetails.h
-//  ThermalSDK
-//
-//  Created by Teledyne on 2022-08-24.
-//  Copyright © 2022 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-
-#import "FLIRIdentity.h"
-
-NS_ASSUME_NONNULL_BEGIN
-@class FLIRWirelessCameraDetails;
-
-@protocol FLIRWirelessCameraDetailsEventDelegate <NSObject>
--(void) detailsUpdated:(FLIRWirelessCameraDetails *) wcd;
-@end
-
-typedef NS_ENUM(NSInteger, FLIRSignalStrength) {
-    /**
-     * @brief State in which it is possible to discover the camera.
-     * @note after discovery phrase camera can be moved further away from the phone and still it will be possible to connect and stream.
-     */
-    discoverable,
-    /** @brief Good signal, allows to live stream and interact with the camera. */
-    excellent,
-    /** @brief Signal strength is fair enough for live streaming and interaction with the camera. Minor frame drops or lag/delay may occur. */
-    fair,
-    /** @brief Weak signal may result in significant frame drops and delays in communication with the camera. */
-    weak,
-    /** @brief Bad signal will eventually result in a connection break or timeout and it will most likely be impossible to get a live stream or interact with the camera. */
-    bad_distance
-};
-
-@interface FLIRWirelessCameraDetails : NSObject
-
-/// SSID/name of the FLIR ONE WiFi network.
-@property (nonatomic, readonly) NSString* ssid;
-
-/// Password for the FLIR ONE WiFi network.
-@property (nonatomic, readonly) NSString* password;
-
-/// The IP address of the F1 wireless camera i.e. 192.168.1.1.
-@property (nonatomic, readonly) NSString* ipAddress;
-
-/// Camera's firmware version.
-@property (nonatomic, readonly) NSString* firmwareVersion;
-
-/// Camera's serial number.
-@property (nonatomic, readonly) NSString* serialNumber;
-
-/// Flag determining if this is the first time setup/connection.
-@property (nonatomic, readonly) BOOL firstTimeSetupFlag;
-
-/// The transmit power in dBm. Valid range is [-127, 126]. A value of 127 (0x7F) indicates that the TX power is not present.
-@property (nonatomic, readonly) NSInteger txPowerLevel;
-
-/// Returns the received signal strength in dBm. The valid range is [-127, 126].
-@property (nonatomic, readonly) NSInteger rssi;
-
-/// Returns the distance.
-@property (nonatomic, readonly) FLIRSignalStrength signal;
-
-/// Flag determining if the default password has changed.
-@property (nonatomic, readonly) BOOL passwordChangedFlag;
-
-/// Camera's current battery level.
-@property (nonatomic, readonly) NSInteger batteryLevel;
-
-/// Camera's current battery state - charging or not.
-@property (nonatomic, readonly) NSInteger batteryCharging;
-
-/// Determines if there are active connections to the camera's WiFi network.
-@property (nonatomic, readonly) NSInteger ConnectedFlag;
-
-/// Delegate that will receive changes, useful to check distance between device and camera
-@property (nonatomic, retain, nullable) id<FLIRWirelessCameraDetailsEventDelegate> delegate;
-
-@property (nonatomic, readonly) NSInteger wifiMode;
-
-@property (nonatomic, readonly) FLIRCameraType cameraType;
-
-@end
-
-
-
-NS_ASSUME_NONNULL_END

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/ThermalSDK.h

@@ -1,74 +0,0 @@
-//
-//  ThermalSDK.h
-//  FLIR Thermal SDK
-//
-//  Copyright © 2019-2024 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-#import <UIKit/UIKit.h>
-
-//! Project version number for ThermalSDK.
-FOUNDATION_EXPORT const double ThermalSDKVersionNumber;
-
-//! Project version string for ThermalSDK.
-FOUNDATION_EXPORT const char *ThermalSDKVersionString;
-
-//! Project commit hash string for ThermalSDK.
-FOUNDATION_EXPORT const char *ThermalSDKCommitHash;
-
-
-// In this header, you should import all the public headers of your framework using statements like #import <ThermalSDK/PublicHeader.h>
-
-#import <ThermalSDK/FLIRCamera.h>
-#import <ThermalSDK/FLIRCameraDeviceInfo.h>
-#import <ThermalSDK/FLIRDiscovery.h>
-#import <ThermalSDK/FLIRCameraImport.h>
-#import <ThermalSDK/FLIRThermalImage.h>
-#import <ThermalSDK/FLIRImageBase.h>
-#import <ThermalSDK/FLIRThermalImageFile.h>
-#import <ThermalSDK/FLIRScale.h>
-#import <ThermalSDK/FLIRFusion.h>
-#import <ThermalSDK/FLIRImageStatistics.h>
-#import <ThermalSDK/FLIRMeasurementSpot.h>
-#import <ThermalSDK/FLIRMeasurementShape.h>
-#import <ThermalSDK/FLIRMeasurementArea.h>
-#import <ThermalSDK/FLIRMeasurementMarker.h>
-#import <ThermalSDK/FLIRMeasurementParameters.h>
-#import <ThermalSDK/FLIRThermalValue.h>
-#import <ThermalSDK/FLIRThermalDelta.h>
-#import <ThermalSDK/FLIRMeasurementCollection.h>
-#import <ThermalSDK/FLIRMeasurementRectangle.h>
-#import <ThermalSDK/FLIRMeasurementEllipse.h>
-#import <ThermalSDK/FLIRMeasurementDimensions.h>
-#import <ThermalSDK/FLIRMeasurementLine.h>
-#import <ThermalSDK/FLIRMeasurementDelta.h>
-#import <ThermalSDK/FLIRPalette.h>
-#import <ThermalSDK/FLIRPaletteManager.h>
-#import <ThermalSDK/FLIRCameraEvent.h>
-#import <ThermalSDK/FLIRDiscoveredCamera.h>
-#import <ThermalSDK/FLIRIdentity.h>
-#import <ThermalSDK/FLIRRemoteControl.h>
-#import <ThermalSDK/FLIRMeasurementsController.h>
-#import <ThermalSDK/FLIRPaletteController.h>
-#import <ThermalSDK/FLIRSystem.h>
-#import <ThermalSDK/FLIRFocus.h>
-#import <ThermalSDK/FLIRTemperatureRange.h>
-#import <ThermalSDK/FLIRFusionController.h>
-#import <ThermalSDK/FLIRCalibration.h>
-#import <ThermalSDK/FLIRBattery.h>
-#import <ThermalSDK/FLIRScaleController.h>
-#import <ThermalSDK/FLIROverlayController.h>
-#import <ThermalSDK/FLIRDisplaySettings.h>
-#import <ThermalSDK/FLIRMeterLinkSensorPoll.h>
-#import <ThermalSDK/FLIRColorDistributionSettings.h>
-#import <ThermalSDK/FLIRStream.h>
-#import <ThermalSDK/FLIRStreamer.h>
-#import <ThermalSDK/FLIRRenderer.h>
-#import <ThermalSDK/FLIRColorizer.h>
-#import <ThermalSDK/FLIRImageColorizer.h>
-#import <ThermalSDK/FLIRRendererImpl.h>
-#import <ThermalSDK/FLIRWirelessCameraDetails.h>
-#import <ThermalSDK/FLIRQuantification.h>
-#import <ThermalSDK/FLIRCameraExport.h>
-

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Modules/module.modulemap

@@ -1,6 +0,0 @@
-framework module ThermalSDK {
-  umbrella header "ThermalSDK.h"
-  export *
-
-  module * { export * }
-}