ilabs-flir 2.0.1 → 2.0.4

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRScale.h

@@ -1,99 +0,0 @@
-//
-//  FLIRScale.h
-//
-//  Copyright © 2019 Teledyne FLIR. All rights reserved.
-//
-
-#pragma once
-
-#import "FLIRThermalValue.h"
-#import "FLIRPalette.h"
-
-/**
- *  Defines an image's linear scale object and basic scale's parameters.
- *  The scale defines the way the Palette is applied to the ThermalImage.
- *  Scale is an interval of the temperature, where colors from a selected Palette is applied.
- *  The available temperature's range is defined by the ThermalImage.
- *  Scale cannot be created directly, it should always be obtained from ThermalImage.
- *  To do so, the ThermalImage.getScale() method should be called.
- */
-@interface FLIRScale : NSObject
-/**  
- *   Sets the minimum and maximum scale values.
- *
- *   @param min  The minimum scale value.
- *   @param max  The maximum scale value.
- */
-- (void)setRangeWithMin:(FLIRThermalValue * _Nonnull)min andMax:(FLIRThermalValue * _Nonnull) max;
-
-/** 
- *   Sets the scale automatically based on the min and max scale values.
- *
- *   @note This call will be removed, use FLIRColorizer.autoScale from FLIRImageColorizer (still images) or FLIRThermalStreamer (live streams) instead.
- */
-- (void)setAutoAdjustEnabled:(BOOL)enabled DEPRECATED_MSG_ATTRIBUTE("This call will be removed, use FLIRColorizer.autoScale from FLIRImageColorizer (still images) or FLIRThermalStreamer (live streams) instead");;
-
-/** 
- *  Gets the current minimum scale value.
- *  @return The min scale value.
- */
-- (FLIRThermalValue * _Nonnull)getRangeMin;
-
-/** 
- *  Gets the current maximum scale value.
- *  @return The max scale value
- */
-- (FLIRThermalValue *  _Nonnull)getRangeMax;
-
-/** 
- *  Gets the thermal scale image.
- *
- *  @return An UIImage representing the thermal scale.
- *
- *  @note This call will be removed, use FLIRColorizer.getScaleImage from FLIRImageColorizer (still images) or FLIRThermalStreamer (live streams) instead.
- */
-- (UIImage * _Nullable)getImage DEPRECATED_MSG_ATTRIBUTE("This call will be removed, use FLIRColorizer.getScaleImage from FLIRImageColorizer (still images) or FLIRThermalStreamer (live streams) instead");
-
-/**
- *  Gets the thermal scale image.
- *
- *  @param palette the pallete
- *  
- *  @return An UIImage representing the full thermal range scale.
- *
- *  @note This feature will likely be removed in upcoming release.
- */
-
-+ (UIImage * _Nullable)getFixedFullRangeScaleImage:(FLIRPalette * _Nonnull) palette DEPRECATED_MSG_ATTRIBUTE("This feature will likely be removed in upcoming release.");;
-
-/**
- *  Gets the thermal scale image from current palette.
- *
- *  @return An UIImage representing the full thermal range scale.
- *
- *  @note This feature will likely be removed in upcoming release.
- */
-
-- (UIImage * _Nullable)getFixedFullRangeScaleImage DEPRECATED_MSG_ATTRIBUTE("This feature will likely be removed in upcoming release.");
-
-
-/**
- *  Gets auto adjust setting.
- *
- *  @note This call will be removed, use FLIRColorizer.autoScale from FLIRImageColorizer (still images) or FLIRThermalStreamer (live streams) instead.
- */
-- (BOOL)isAutoAdjustEnabled DEPRECATED_MSG_ATTRIBUTE("This call will be removed, use FLIRColorizer.autoScale from FLIRImageColorizer (still images) or FLIRThermalStreamer (live streams) instead");
-
-/**
- *  Sets the maximum range, where colors defined by the Palette are applied to the ThermalImage.
- *  @Deprecated Setting max value may affect min value, use setRangeWithMin:andMax:
- */
-- (void)setRangeMax:(FLIRThermalValue * _Nonnull)max;
-
-/**
- *  Sets the minimum range, where colors defined by the Palette are applied to the ThermalImage.
- *  @Deprecated Setting min value may affect max value, use setRangeWithMin:andMax:
- */
-- (void)setRangeMin:(FLIRThermalValue * _Nonnull)min;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRScaleController.h

@@ -1,44 +0,0 @@
-//
-//  FLIRScaleController.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2020-09-14.
-//  Copyright © 2020 Teledyne FLIR. All rights reserved.
-//
-
-#pragma once
-
-@class FLIRRange;
-
-/**
-* Camera scale controller interface.
-*/
-
-@interface FLIRScaleController : NSObject
-
-/** check if auto adjust is available */
-- (BOOL)autoAdjustAvailable;
-/**
- * Get auto adjust mode. Defines the adjust mode of the temperature scale on the live screen on the camera.
- * Auto mode (true value): In this mode, the camera is continuously auto-adjusted for the best image brightness and contrast.
- * Manual mode (false value): This mode allows manual adjustments of the temperature span and the temperature level.
- */
-- (BOOL)getAutoAdjust;
-/** Set auto adjust mode */
-- (BOOL)setAutoAdjust:(BOOL)autoAdjust error: (out NSError * _Nullable * _Nullable)error;
-/** subscribe to changes of auto adjust mode */
-- (BOOL)subscribeAutoAdjust:(out NSError * _Nullable * _Nullable)error;
-/** unsubscribe to changes of auto adjust mode */
-- (void)unsubscribeAutoAdjust;
-/** check if scale active mode is available */
-- (BOOL)activeAvailable;
-/** get active mode */
-- (BOOL)getActive;
-/** Enables/disables the scale active mode.*/
-- (BOOL)setActive:(BOOL)active error: (out NSError * _Nullable * _Nullable)error;
-/** get range for scale */
-- (FLIRRange *_Nullable)getRange;
-/** set range for scale */
-- (BOOL)setRange:(FLIRRange *_Nonnull)range error:(out NSError * _Nullable * _Nullable)error;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRStream.h

@@ -1,109 +0,0 @@
-//
-//  FLIRStream.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2021-10-11.
-//  Copyright © 2021 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-
-NS_ASSUME_NONNULL_BEGIN
-
-/**
- *  Delegate for streaming
- */
-
-@protocol FLIRStreamDelegate <NSObject>
-
-/**
- *  Called when an error occurs in streaming
- */
-- (void)onError:(NSError *)error;
-
-/**
- *  Called when an image is available on the stream
- */
-- (void)onImageReceived;
-
-@end
-
-/**
- *  Camera stream class.
- *  @note the implementation for thermal streaming for network cameras is still in experimental stage.
- */
-@interface FLIRStream : NSObject
-
-/**
- *  Delegate with callbacks
- */
-@property (nonatomic, strong, nullable) id<FLIRStreamDelegate> delegate;
-
-/**
- *  True if the stream contains both thermal and visual data
- */
-@property (nonatomic, readonly) BOOL isDual;
-
-/**
- *  Width and height of the IR data for each frame
- *  (Zero If no IR data is available)
- */
-@property (nonatomic, readonly) CGSize irSize;
-
-/**
- *  Width and height of the visual data for each frame
- *  (Zero If no visual data is available)
- */
-@property (nonatomic, readonly) CGSize visualSize;
-
-/**
- *  True if the stream contains readiometric data
- */
-@property (nonatomic, readonly) BOOL isThermal;
-
-/**
- *  True if the stream is active and streaming
- */
-@property (nonatomic, readonly) BOOL isStreaming;
-
-/**
- *  Start frame grabbing on the provided stream.
- *
- *  Starts the frame grabbing. When a new frame is available the delegate method onImageRecieved will be called.
- *  @note the implementation for thermal streaming for network cameras is still in experimental stage.
- *  @param error  The error if start returns false
- *  @return returns false if not able to start stream
- */
-- (BOOL)start:(out NSError * _Nullable __autoreleasing * _Nullable)error;
-
-/**
- *  Stop frame grabbing on the stream.
- */
-- (void)stop;
-
-/**
- * Set the camera's streamed frame rate.<br />
- * Note: Some cameras will not change frame rate while streaming.
- *
- * @param hz Frames per second, must be in between getMinFrameRate and getMaxFrameRate, inclusive
- */
-- (BOOL)setFrameRate:(double)hertz error:(out NSError * _Nullable __autoreleasing * _Nullable)error;
-
-/**
- * Get the camera's streamed frame rate. If the frame rate cannot be fetched, zero is returned.
- */
-- (double)getFrameRate;
-
-/**
- * Get the lowest possible frame rate for this camera stream.
- */
-- (double)getMinFrameRate;
-
-/**
- * Get the highest possible frame rate for this camera stream. If the frame rate cannot be fetched, zero is returned.
- */
-- (double)getMaxFrameRate;
-
-@end
-
-NS_ASSUME_NONNULL_END

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRStreamer.h

@@ -1,124 +0,0 @@
-//
-//  FLIRStreamer.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2021-10-12.
-//  Copyright © 2021 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-
-#import "FLIRRendererImpl.h"
-#import "FLIRColorizer.h"
-#import "FLIRCamera.h"
-
-@class FLIRStream;
-@class FLIRThermalImage;
-
-NS_ASSUME_NONNULL_BEGIN
-
-@class FLIRVividIRParameters;
-
-/**
- * Vivid IR upscale methods
- * chaning this will give faster response, but lower quality
- */
-typedef NS_ENUM(NSInteger, FLIRVividIRUpscale) {
-    /// Use superResolution for scaling (only available on FLIR One Pro models)
-    /// this is the default setting for FLIR One Pro
-    FLIRSuperResolution,
-    /// use trilateral scaling
-    /// this is default setting for FLIR One
-    FLIRTrilateral
-};
-
-/**
- * Vivid IR latency mode
- * chaning this will give faster response, but lower quality
- */
-typedef NS_ENUM(NSInteger, FLIRVividIRLatency) {
-    /// Use a latency of 2 frames for denoise
-    /// this is the default setting for FLIR One
-    FLIRLatencyHigh,
-    /// Use a latency of 0 frames for denoise (fastest)
-    FLIRLatencyLow
-};
-
-/**
- *  Streamer class
- */
-@interface FLIRStreamer : FLIRRendererImpl
-
-/**
- *  Get parameters for the VividIR filter
- *  Returns nil if this streamer doesn't use VividIR
- */
-@property (nonatomic, nullable, readonly) FLIRVividIRParameters* vividIRParameters;
-
-@end
-
-/**
- *  Streamer class for thermal data
- */
-@interface FLIRThermalStreamer : FLIRStreamer<FLIRColorizer>
-
-/**
- *  Create a thermal streamer on a stream
- *
- *  @param stream the stream to be streamed
- *
- *  The stream should contain thermal data. This will also contain a colorizer to provide a visual image
- *  from the thermal stream.
- */
-- (instancetype)initWithStream:(FLIRStream *)stream;
-
-/**
- *  Create a thermal streamer on a stream
- *
- *  @param stream the stream to be streamed
- *  @param streamingOptions options for streaming, currently the only option is STREAMING_NO_OPENGL
- *     which creates a pipeline using only CPU filters, avoiding openGL rendering
- *
- *  The stream should contain thermal data. This will also contain a colorizer to provide a visual image
- *  from the thermal stream.
- */
-- (instancetype)initWithStream:(FLIRStream *)stream options: (StreamingOptions)streamingOptions;
-
-/**
- *  call a function with a @ref FLIRThermalImage from the stream
- *
- *  @param imageBlock a block with an image parameter
- */
-- (void)withThermalImage:(void (^)(FLIRThermalImage *))imageBlock;
-
-
-@end
-
-@interface FLIRVividIRParameters : NSObject
-
-
-/// Upscale method used, superresolution is only available on FLIR One Pro models
-@property (nonatomic, assign) FLIRVividIRUpscale upscale;
-/// Latency for denoise
-@property (nonatomic, assign) FLIRVividIRLatency latency;
-/// Denoise filters enabled
-@property (nonatomic, assign) BOOL useDenoise;
-
-@end
-
-/**
- *  Streamer class for visual data
- */
-@interface FLIRVisualStreamer : FLIRStreamer
-/**
- *  Create a visual streamer on a stream
- *
- *  @param stream the stream to be streamed
- *
- *  The stream should contain visual data.
- */
-- (instancetype)initWithStream:(FLIRStream *)stream;
-
-@end
-
-NS_ASSUME_NONNULL_END

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRSystem.h

@@ -1,40 +0,0 @@
-//
-//  FLIRSystem.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2020-07-02.
-//  Copyright © 2020 Teledyne FLIR. All rights reserved.
-//
-
-#import <Foundation/Foundation.h>
-
-/** system parameters for the camera */
-@interface FLIRSystem : NSObject
-
-/** get the a flag indicating the system is running */
-- (BOOL) getSystemUp;
-/** get the date and time for the camera */
-- (NSDateComponents* _Nullable)getTime;
-/** get the time zone name for the camera */
-- (NSString* _Nullable)getTimeZoneName;
-/// Set the date and time for the camera.
-/// - Parameter dateComponents: Required components: year, month, day, hour, minute, second and calendar.
-///
-/// The given components are used to set the camera's date and time.
-/// > Note: Timezone is ignored; it's set by ``setTimeZoneName:error:``.  Some cameras set seconds to 0.
-- (BOOL)setTime:(NSDateComponents* _Nonnull)dateComponents error:(out NSError * _Nullable *_Nullable)error;
-/// Set the time zone name for the camera.
-/// > Note: not all cameras support this.
-- (BOOL)setTimeZoneName:(NSString* _Nonnull)timeZoneName error:(out NSError * _Nullable *_Nullable)error;
-/// Get a list of available time zones
-- (NSArray<NSString *>* _Nullable)getAvailableTimeZones:(out NSError * _Nullable *_Nullable)error;
-
-- (BOOL)setWiFiSSID:(NSString * _Nonnull)ssid;
-
-@property (nonatomic, readonly) NSUInteger capacityKBytes;
-@property (nonatomic, readonly) NSUInteger freeKBytes;
-@property (nonatomic) BOOL isTorchOn;
-
-- (void) reboot;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRTemperatureRange.h

@@ -1,43 +0,0 @@
-//
-//  FLIRTemperatureRange.h
-//  ThermalSDK
-//
-//  Created by FLIR on 2020-07-02.
-//  Copyright © 2020 Teledyne FLIR. All rights reserved.
-//
-
-@class FLIRThermalValue;
-
-/** a temperature range for a camera */
-@interface FLIRRange : NSObject
-
-/** lowest thermal value */
-@property (nonatomic, retain) FLIRThermalValue* _Nonnull min;
-/** highest thermal value */
-@property (nonatomic, retain) FLIRThermalValue* _Nonnull max;
-
-@end
-
-
-@interface FLIRTemperatureRange : NSObject
-
-/** get all available ranges */
-- (NSArray<FLIRRange*>* _Nullable) getRanges;
-/** get the range used */
-- (int)getSelectedIndex;
-/** 
- * Set the range used.
- * When 'selectedIndex' is being set on the network camera, the camera responds with a success, but it asynchronously sets itself up.
- * In consequence, the success response doesn't necessarily mean the camera is done with changing the setting.
- * This means that reading the 'selectedIndex' will return the old value for a short while, until the camera sets everything up internally.
- * It is up to the developer to subscribe if it is required.
- * When 'selectedIndex' is being set on the FLIR ONE camera, in order to properly reflect new value in 'image.CameraInformation'
- * the streaming must be started prior to setting the value and also 'FLIRThermalImage.getImage()' needs to be called.
- */
-- (BOOL)setSelectedIndex: (int)selectedIndex error: (out NSError * _Nullable *_Nullable)error;
-/** Subscribes for selected temperature range notifications. */
-- (BOOL)subscribeSelectedIndex: (out NSError * _Nullable *_Nullable) error;
-/** Revokes subscription for selected temperature range. */
-- (void)unsubscribeSelectedIndex;
-
-@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRThermalDelta.h

@@ -1,77 +0,0 @@
-//
-//  FLIRThermalDelta.h
-//  FLIR Thermal SDK
-//
-//  Copyright © 2020 Teledyne FLIR. All rights reserved.
-//
-
-#pragma once
-#import <Foundation/Foundation.h>
-#import "FLIRThermalValue.h"
-
-// should match atlas::image::measurements::DeltaMemberValueType
-
-/**
- *  Defines delta member value type.
- */
-typedef NS_ENUM(NSUInteger, DeltaMemberValueType) {
-    /**  Min marker value for the specified member type.
-     *   Valid for member types: rectangle, ellipse, line.
-     */
-    typeMin,
-    /**  Max marker value for the specified member type.
-     *   Valid for member types: rectangle, ellipse, line.
-     */
-    typeMax,
-    /**  Average value for the specified member type.
-     *   Valid for member types: rectangle, ellipse, line.
-     */
-    typeAvg,
-    /**  Arbitrary value.
-     *   Valid for member types: spot, reference temperature.
-     */
-    typeValue
-};
-
-/**
- * Represents an Thermal delta with additional state information. It is used to obtain Thermal data
- * from a ThermalImage or any MeasurementShape added to the image.
- */
-@interface FLIRThermalDelta : NSObject
-
-/**
- * Initialize a thermal delta value with specified temperature difference and unit (useful for tests)
- *
- * @param value Temperature difference.
- * @param unit Temperature unit.
- */
-- (instancetype)initWithValue:(double) value andUnit:(TemperatureUnit) unit;
-
-/**
- *  Gets the difference/delta value.
- */
-@property (readonly, nonatomic) double value;
-
-/**
- *  Gets the temperature unit.
- */
-@property (readonly, nonatomic) TemperatureUnit unit;
-
-/**
- *  Gets the state of the value.
- */
-@property (readonly, nonatomic) ThermalValueState state;
-
-/**
- *  Gets a formatted string representing the value.
- */
-- (NSString *)description;
-
-/**
- *  Convenience function to test if two FLIRThermalDelta have the same temperature difference with imprecise floating-point comparison.
- *  @param other The second (right hand side) value to compare.
- *  @param absError The margin of error in degrees Kelvin.
- */
-- (BOOL)areNear:(id)other absError: (double)absError;
-
-@end