hane 1.0.0

package/vendor/zlib/adler32.c

@@ -0,0 +1,164 @@
+/* adler32.c -- compute the Adler-32 checksum of a data stream
+ * Copyright (C) 1995-2011, 2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zutil.h"
+
+#define BASE 65521U     /* largest prime smaller than 65536 */
+#define NMAX 5552
+/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
+
+#define DO1(buf,i)  {adler += (buf)[i]; sum2 += adler;}
+#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
+#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
+#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
+#define DO16(buf)   DO8(buf,0); DO8(buf,8);
+
+/* use NO_DIVIDE if your processor does not do division in hardware --
+   try it both ways to see which is faster */
+#ifdef NO_DIVIDE
+/* note that this assumes BASE is 65521, where 65536 % 65521 == 15
+   (thank you to John Reiser for pointing this out) */
+#  define CHOP(a) \
+    do { \
+        unsigned long tmp = a >> 16; \
+        a &= 0xffffUL; \
+        a += (tmp << 4) - tmp; \
+    } while (0)
+#  define MOD28(a) \
+    do { \
+        CHOP(a); \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
+#  define MOD(a) \
+    do { \
+        CHOP(a); \
+        MOD28(a); \
+    } while (0)
+#  define MOD63(a) \
+    do { /* this assumes a is not negative */ \
+        z_off64_t tmp = a >> 32; \
+        a &= 0xffffffffL; \
+        a += (tmp << 8) - (tmp << 5) + tmp; \
+        tmp = a >> 16; \
+        a &= 0xffffL; \
+        a += (tmp << 4) - tmp; \
+        tmp = a >> 16; \
+        a &= 0xffffL; \
+        a += (tmp << 4) - tmp; \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
+#else
+#  define MOD(a) a %= BASE
+#  define MOD28(a) a %= BASE
+#  define MOD63(a) a %= BASE
+#endif
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_z(uLong adler, const Bytef *buf, z_size_t len) {
+    unsigned long sum2;
+    unsigned n;
+
+    /* split Adler-32 into component sums */
+    sum2 = (adler >> 16) & 0xffff;
+    adler &= 0xffff;
+
+    /* in case user likes doing a byte at a time, keep it fast */
+    if (len == 1) {
+        adler += buf[0];
+        if (adler >= BASE)
+            adler -= BASE;
+        sum2 += adler;
+        if (sum2 >= BASE)
+            sum2 -= BASE;
+        return adler | (sum2 << 16);
+    }
+
+    /* initial Adler-32 value (deferred check for len == 1 speed) */
+    if (buf == Z_NULL)
+        return 1L;
+
+    /* in case short lengths are provided, keep it somewhat fast */
+    if (len < 16) {
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        if (adler >= BASE)
+            adler -= BASE;
+        MOD28(sum2);            /* only added so many BASE's */
+        return adler | (sum2 << 16);
+    }
+
+    /* do length NMAX blocks -- requires just one modulo operation */
+    while (len >= NMAX) {
+        len -= NMAX;
+        n = NMAX / 16;          /* NMAX is divisible by 16 */
+        do {
+            DO16(buf);          /* 16 sums unrolled */
+            buf += 16;
+        } while (--n);
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* do remaining bytes (less than NMAX, still just one modulo) */
+    if (len) {                  /* avoid modulos if none remaining */
+        while (len >= 16) {
+            len -= 16;
+            DO16(buf);
+            buf += 16;
+        }
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* return recombined sums */
+    return adler | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32(uLong adler, const Bytef *buf, uInt len) {
+    return adler32_z(adler, buf, len);
+}
+
+/* ========================================================================= */
+local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2) {
+    unsigned long sum1;
+    unsigned long sum2;
+    unsigned rem;
+
+    /* for negative len, return invalid adler32 as a clue for debugging */
+    if (len2 < 0)
+        return 0xffffffffUL;
+
+    /* the derivation of this formula is left as an exercise for the reader */
+    MOD63(len2);                /* assumes len2 >= 0 */
+    rem = (unsigned)len2;
+    sum1 = adler1 & 0xffff;
+    sum2 = rem * sum1;
+    MOD(sum2);
+    sum1 += (adler2 & 0xffff) + BASE - 1;
+    sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+    if (sum1 >= BASE) sum1 -= BASE;
+    if (sum1 >= BASE) sum1 -= BASE;
+    if (sum2 >= ((unsigned long)BASE << 1)) sum2 -= ((unsigned long)BASE << 1);
+    if (sum2 >= BASE) sum2 -= BASE;
+    return sum1 | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(uLong adler1, uLong adler2, z_off_t len2) {
+    return adler32_combine_(adler1, adler2, len2);
+}
+
+uLong ZEXPORT adler32_combine64(uLong adler1, uLong adler2, z_off64_t len2) {
+    return adler32_combine_(adler1, adler2, len2);
+}

package/vendor/zlib/amiga/Makefile.pup

@@ -0,0 +1,69 @@
+# Amiga powerUP (TM) Makefile
+# makefile for libpng and SAS C V6.58/7.00 PPC compiler
+# Copyright (C) 1998 by Andreas R. Kleinert
+
+LIBNAME	= libzip.a
+
+CC	= scppc
+CFLAGS	= NOSTKCHK NOSINT OPTIMIZE OPTGO OPTPEEP OPTINLOCAL OPTINL \
+	  OPTLOOP OPTRDEP=8 OPTDEP=8 OPTCOMP=8 NOVER
+AR	= ppc-amigaos-ar cr
+RANLIB	= ppc-amigaos-ranlib
+LD	= ppc-amigaos-ld -r
+LDFLAGS	= -o
+LDLIBS	= LIB:scppc.a LIB:end.o
+RM	= delete quiet
+
+OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \
+       uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example minigzip
+
+check: test
+test: all
+	example
+	echo hello world | minigzip | minigzip -d
+
+$(LIBNAME): $(OBJS)
+	$(AR) $@ $(OBJS)
+	-$(RANLIB) $@
+
+example: example.o $(LIBNAME)
+	$(LD) $(LDFLAGS) $@ LIB:c_ppc.o $@.o $(LIBNAME) $(LDLIBS)
+
+minigzip: minigzip.o $(LIBNAME)
+	$(LD) $(LDFLAGS) $@ LIB:c_ppc.o $@.o $(LIBNAME) $(LDLIBS)
+
+mostlyclean: clean
+clean:
+	$(RM) *.o example minigzip $(LIBNAME) foo.gz
+
+zip:
+	zip -ul9 zlib README ChangeLog Makefile Make????.??? Makefile.?? \
+	  descrip.mms *.[ch]
+
+tgz:
+	cd ..; tar cfz zlib/zlib.tgz zlib/README zlib/ChangeLog zlib/Makefile \
+	  zlib/Make????.??? zlib/Makefile.?? zlib/descrip.mms zlib/*.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: crc32.h zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzclose.o: zlib.h zconf.h gzguts.h
+gzlib.o: zlib.h zconf.h gzguts.h
+gzread.o: zlib.h zconf.h gzguts.h
+gzwrite.o: zlib.h zconf.h gzguts.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h

package/vendor/zlib/amiga/Makefile.sas

@@ -0,0 +1,68 @@
+# SMakefile for zlib
+# Modified from the standard UNIX Makefile Copyright Jean-loup Gailly
+# Osma Ahvenlampi <Osma.Ahvenlampi@hut.fi>
+# Amiga, SAS/C 6.56 & Smake
+
+CC=sc
+CFLAGS=OPT
+#CFLAGS=OPT CPU=68030
+#CFLAGS=DEBUG=LINE
+LDFLAGS=LIB z.lib
+
+SCOPTIONS=OPTSCHED OPTINLINE OPTALIAS OPTTIME OPTINLOCAL STRMERGE \
+       NOICONS PARMS=BOTH NOSTACKCHECK UTILLIB NOVERSION ERRORREXX \
+       DEF=POSTINC
+
+OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \
+       uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: SCOPTIONS example minigzip
+
+check: test
+test: all
+	example
+	echo hello world | minigzip | minigzip -d
+
+install: z.lib
+	copy clone zlib.h zconf.h INCLUDE:
+	copy clone z.lib LIB:
+
+z.lib: $(OBJS)
+	oml z.lib r $(OBJS)
+
+example: example.o z.lib
+	$(CC) $(CFLAGS) LINK TO $@ example.o $(LDFLAGS)
+
+minigzip: minigzip.o z.lib
+	$(CC) $(CFLAGS) LINK TO $@ minigzip.o $(LDFLAGS)
+
+mostlyclean: clean
+clean:
+	-delete force quiet example minigzip *.o z.lib foo.gz *.lnk SCOPTIONS
+
+SCOPTIONS: Makefile.sas
+	copy to $@ <from <
+$(SCOPTIONS)
+<
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: crc32.h zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzclose.o: zlib.h zconf.h gzguts.h
+gzlib.o: zlib.h zconf.h gzguts.h
+gzread.o: zlib.h zconf.h gzguts.h
+gzwrite.o: zlib.h zconf.h gzguts.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h

package/vendor/zlib/compress.c

@@ -0,0 +1,75 @@
+/* compress.c -- compress a memory buffer
+ * Copyright (C) 1995-2005, 2014, 2016 Jean-loup Gailly, Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#define ZLIB_INTERNAL
+#include "zlib.h"
+
+/* ===========================================================================
+     Compresses the source buffer into the destination buffer. The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer. Upon entry, destLen is the total size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
+*/
+int ZEXPORT compress2(Bytef *dest, uLongf *destLen, const Bytef *source,
+                      uLong sourceLen, int level) {
+    z_stream stream;
+    int err;
+    const uInt max = (uInt)-1;
+    uLong left;
+
+    left = *destLen;
+    *destLen = 0;
+
+    stream.zalloc = (alloc_func)0;
+    stream.zfree = (free_func)0;
+    stream.opaque = (voidpf)0;
+
+    err = deflateInit(&stream, level);
+    if (err != Z_OK) return err;
+
+    stream.next_out = dest;
+    stream.avail_out = 0;
+    stream.next_in = (z_const Bytef *)source;
+    stream.avail_in = 0;
+
+    do {
+        if (stream.avail_out == 0) {
+            stream.avail_out = left > (uLong)max ? max : (uInt)left;
+            left -= stream.avail_out;
+        }
+        if (stream.avail_in == 0) {
+            stream.avail_in = sourceLen > (uLong)max ? max : (uInt)sourceLen;
+            sourceLen -= stream.avail_in;
+        }
+        err = deflate(&stream, sourceLen ? Z_NO_FLUSH : Z_FINISH);
+    } while (err == Z_OK);
+
+    *destLen = stream.total_out;
+    deflateEnd(&stream);
+    return err == Z_STREAM_END ? Z_OK : err;
+}
+
+/* ===========================================================================
+ */
+int ZEXPORT compress(Bytef *dest, uLongf *destLen, const Bytef *source,
+                     uLong sourceLen) {
+    return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
+}
+
+/* ===========================================================================
+     If the default memLevel or windowBits for deflateInit() is changed, then
+   this function needs to be updated.
+ */
+uLong ZEXPORT compressBound(uLong sourceLen) {
+    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
+           (sourceLen >> 25) + 13;
+}