hane 1.0.0 → 1.1.1

package/vendor/zlib/contrib/README.contrib

@@ -1,57 +1,57 @@
-All files under this contrib directory are UNSUPPORTED. They were
-provided by users of zlib and were not tested by the authors of zlib.
-Use at your own risk. Please contact the authors of the contributions
-for help about these, not the zlib authors. Thanks.
-
-
-ada/        by Dmitriy Anisimkov <anisimkov@yahoo.com>
-        Support for Ada
-        See http://zlib-ada.sourceforge.net/
-
-blast/      by Mark Adler <madler@alumni.caltech.edu>
-        Decompressor for output of PKWare Data Compression Library (DCL)
-
-delphi/     by Cosmin Truta <cosmint@cs.ubbcluj.ro>
-        Support for Delphi and C++ Builder
-
-dotzlib/    by Henrik Ravn <henrik@ravn.com>
-        Support for Microsoft .Net and Visual C++ .Net
-
-gcc_gvmat64/by Gilles Vollant <info@winimage.com>
-        GCC Version of x86 64-bit (AMD64 and Intel EM64t) code for x64
-        assembler to replace longest_match() and inflate_fast()
-
-infback9/   by Mark Adler <madler@alumni.caltech.edu>
-        Unsupported diffs to infback to decode the deflate64 format
-
-iostream/   by Kevin Ruland <kevin@rodin.wustl.edu>
-        A C++ I/O streams interface to the zlib gz* functions
-
-iostream2/  by Tyge Løvset <Tyge.Lovset@cmr.no>
-        Another C++ I/O streams interface
-
-iostream3/  by Ludwig Schwardt <schwardt@sun.ac.za>
-            and Kevin Ruland <kevin@rodin.wustl.edu>
-        Yet another C++ I/O streams interface
-
-minizip/    by Gilles Vollant <info@winimage.com>
-        Mini zip and unzip based on zlib
-        Includes Zip64 support by Mathias Svensson <mathias@result42.com>
-        See http://www.winimage.com/zLibDll/minizip.html
-
-pascal/     by Bob Dellaca <bobdl@xtra.co.nz> et al.
-        Support for Pascal
-
-puff/       by Mark Adler <madler@alumni.caltech.edu>
-        Small, low memory usage inflate.  Also serves to provide an
-        unambiguous description of the deflate format.
-
-testzlib/   by Gilles Vollant <info@winimage.com>
-        Example of the use of zlib
-
-untgz/      by Pedro A. Aranda Gutierrez <paag@tid.es>
-        A very simple tar.gz file extractor using zlib
-
-vstudio/    by Gilles Vollant <info@winimage.com>
-        Building a minizip-enhanced zlib with Microsoft Visual Studio
-        Includes vc11 from kreuzerkrieg and vc12 from davispuh
+All files under this contrib directory are UNSUPPORTED. They were
+provided by users of zlib and were not tested by the authors of zlib.
+Use at your own risk. Please contact the authors of the contributions
+for help about these, not the zlib authors. Thanks.
+
+
+ada/        by Dmitriy Anisimkov <anisimkov@yahoo.com>
+        Support for Ada
+        See http://zlib-ada.sourceforge.net/
+
+blast/      by Mark Adler <madler@alumni.caltech.edu>
+        Decompressor for output of PKWare Data Compression Library (DCL)
+
+delphi/     by Cosmin Truta <cosmint@cs.ubbcluj.ro>
+        Support for Delphi and C++ Builder
+
+dotzlib/    by Henrik Ravn <henrik@ravn.com>
+        Support for Microsoft .Net and Visual C++ .Net
+
+gcc_gvmat64/by Gilles Vollant <info@winimage.com>
+        GCC Version of x86 64-bit (AMD64 and Intel EM64t) code for x64
+        assembler to replace longest_match() and inflate_fast()
+
+infback9/   by Mark Adler <madler@alumni.caltech.edu>
+        Unsupported diffs to infback to decode the deflate64 format
+
+iostream/   by Kevin Ruland <kevin@rodin.wustl.edu>
+        A C++ I/O streams interface to the zlib gz* functions
+
+iostream2/  by Tyge Løvset <Tyge.Lovset@cmr.no>
+        Another C++ I/O streams interface
+
+iostream3/  by Ludwig Schwardt <schwardt@sun.ac.za>
+            and Kevin Ruland <kevin@rodin.wustl.edu>
+        Yet another C++ I/O streams interface
+
+minizip/    by Gilles Vollant <info@winimage.com>
+        Mini zip and unzip based on zlib
+        Includes Zip64 support by Mathias Svensson <mathias@result42.com>
+        See http://www.winimage.com/zLibDll/minizip.html
+
+pascal/     by Bob Dellaca <bobdl@xtra.co.nz> et al.
+        Support for Pascal
+
+puff/       by Mark Adler <madler@alumni.caltech.edu>
+        Small, low memory usage inflate.  Also serves to provide an
+        unambiguous description of the deflate format.
+
+testzlib/   by Gilles Vollant <info@winimage.com>
+        Example of the use of zlib
+
+untgz/      by Pedro A. Aranda Gutierrez <paag@tid.es>
+        A very simple tar.gz file extractor using zlib
+
+vstudio/    by Gilles Vollant <info@winimage.com>
+        Building a minizip-enhanced zlib with Microsoft Visual Studio
+        Includes vc11 from kreuzerkrieg and vc12 from davispuh

package/vendor/zlib/contrib/ada/buffer_demo.adb

@@ -1,106 +1,106 @@
-----------------------------------------------------------------
---  ZLib for Ada thick binding.                               --
---                                                            --
---  Copyright (C) 2002-2004 Dmitriy Anisimkov                 --
---                                                            --
---  Open source license information is in the zlib.ads file.  --
-----------------------------------------------------------------
---
---  $Id: buffer_demo.adb,v 1.3 2004/09/06 06:55:35 vagul Exp $
-
---  This demo program provided by Dr Steve Sangwine <sjs@essex.ac.uk>
---
---  Demonstration of a problem with Zlib-Ada (already fixed) when a buffer
---  of exactly the correct size is used for decompressed data, and the last
---  few bytes passed in to Zlib are checksum bytes.
-
---  This program compresses a string of text, and then decompresses the
---  compressed text into a buffer of the same size as the original text.
-
-with Ada.Streams; use Ada.Streams;
-with Ada.Text_IO;
-
-with ZLib; use ZLib;
-
-procedure Buffer_Demo is
-   EOL  : Character renames ASCII.LF;
-   Text : constant String
-     := "Four score and seven years ago our fathers brought forth," & EOL &
-        "upon this continent, a new nation, conceived in liberty," & EOL &
-        "and dedicated to the proposition that `all men are created equal'.";
-
-   Source : Stream_Element_Array (1 .. Text'Length);
-   for Source'Address use Text'Address;
-
-begin
-   Ada.Text_IO.Put (Text);
-   Ada.Text_IO.New_Line;
-   Ada.Text_IO.Put_Line
-     ("Uncompressed size : " & Positive'Image (Text'Length) & " bytes");
-
-   declare
-      Compressed_Data : Stream_Element_Array (1 .. Text'Length);
-      L               : Stream_Element_Offset;
-   begin
-      Compress : declare
-         Compressor : Filter_Type;
-         I : Stream_Element_Offset;
-      begin
-         Deflate_Init (Compressor);
-
-         --  Compress the whole of T at once.
-
-         Translate (Compressor, Source, I, Compressed_Data, L, Finish);
-         pragma Assert (I = Source'Last);
-
-         Close (Compressor);
-
-         Ada.Text_IO.Put_Line
-           ("Compressed size :   "
-            & Stream_Element_Offset'Image (L) & " bytes");
-      end Compress;
-
-      --  Now we decompress the data, passing short blocks of data to Zlib
-      --  (because this demonstrates the problem - the last block passed will
-      --  contain checksum information and there will be no output, only a
-      --  check inside Zlib that the checksum is correct).
-
-      Decompress : declare
-         Decompressor : Filter_Type;
-
-         Uncompressed_Data : Stream_Element_Array (1 .. Text'Length);
-
-         Block_Size : constant := 4;
-         --  This makes sure that the last block contains
-         --  only Adler checksum data.
-
-         P : Stream_Element_Offset := Compressed_Data'First - 1;
-         O : Stream_Element_Offset;
-      begin
-         Inflate_Init (Decompressor);
-
-         loop
-            Translate
-              (Decompressor,
-               Compressed_Data
-                 (P + 1 .. Stream_Element_Offset'Min (P + Block_Size, L)),
-               P,
-               Uncompressed_Data
-                 (Total_Out (Decompressor) + 1 .. Uncompressed_Data'Last),
-               O,
-               No_Flush);
-
-               Ada.Text_IO.Put_Line
-                 ("Total in : " & Count'Image (Total_In (Decompressor)) &
-                  ", out : " & Count'Image (Total_Out (Decompressor)));
-
-               exit when P = L;
-         end loop;
-
-         Ada.Text_IO.New_Line;
-         Ada.Text_IO.Put_Line
-           ("Decompressed text matches original text : "
-             & Boolean'Image (Uncompressed_Data = Source));
-      end Decompress;
-   end;
-end Buffer_Demo;
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2004 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+--
+--  $Id: buffer_demo.adb,v 1.3 2004/09/06 06:55:35 vagul Exp $
+
+--  This demo program provided by Dr Steve Sangwine <sjs@essex.ac.uk>
+--
+--  Demonstration of a problem with Zlib-Ada (already fixed) when a buffer
+--  of exactly the correct size is used for decompressed data, and the last
+--  few bytes passed in to Zlib are checksum bytes.
+
+--  This program compresses a string of text, and then decompresses the
+--  compressed text into a buffer of the same size as the original text.
+
+with Ada.Streams; use Ada.Streams;
+with Ada.Text_IO;
+
+with ZLib; use ZLib;
+
+procedure Buffer_Demo is
+   EOL  : Character renames ASCII.LF;
+   Text : constant String
+     := "Four score and seven years ago our fathers brought forth," & EOL &
+        "upon this continent, a new nation, conceived in liberty," & EOL &
+        "and dedicated to the proposition that `all men are created equal'.";
+
+   Source : Stream_Element_Array (1 .. Text'Length);
+   for Source'Address use Text'Address;
+
+begin
+   Ada.Text_IO.Put (Text);
+   Ada.Text_IO.New_Line;
+   Ada.Text_IO.Put_Line
+     ("Uncompressed size : " & Positive'Image (Text'Length) & " bytes");
+
+   declare
+      Compressed_Data : Stream_Element_Array (1 .. Text'Length);
+      L               : Stream_Element_Offset;
+   begin
+      Compress : declare
+         Compressor : Filter_Type;
+         I : Stream_Element_Offset;
+      begin
+         Deflate_Init (Compressor);
+
+         --  Compress the whole of T at once.
+
+         Translate (Compressor, Source, I, Compressed_Data, L, Finish);
+         pragma Assert (I = Source'Last);
+
+         Close (Compressor);
+
+         Ada.Text_IO.Put_Line
+           ("Compressed size :   "
+            & Stream_Element_Offset'Image (L) & " bytes");
+      end Compress;
+
+      --  Now we decompress the data, passing short blocks of data to Zlib
+      --  (because this demonstrates the problem - the last block passed will
+      --  contain checksum information and there will be no output, only a
+      --  check inside Zlib that the checksum is correct).
+
+      Decompress : declare
+         Decompressor : Filter_Type;
+
+         Uncompressed_Data : Stream_Element_Array (1 .. Text'Length);
+
+         Block_Size : constant := 4;
+         --  This makes sure that the last block contains
+         --  only Adler checksum data.
+
+         P : Stream_Element_Offset := Compressed_Data'First - 1;
+         O : Stream_Element_Offset;
+      begin
+         Inflate_Init (Decompressor);
+
+         loop
+            Translate
+              (Decompressor,
+               Compressed_Data
+                 (P + 1 .. Stream_Element_Offset'Min (P + Block_Size, L)),
+               P,
+               Uncompressed_Data
+                 (Total_Out (Decompressor) + 1 .. Uncompressed_Data'Last),
+               O,
+               No_Flush);
+
+               Ada.Text_IO.Put_Line
+                 ("Total in : " & Count'Image (Total_In (Decompressor)) &
+                  ", out : " & Count'Image (Total_Out (Decompressor)));
+
+               exit when P = L;
+         end loop;
+
+         Ada.Text_IO.New_Line;
+         Ada.Text_IO.Put_Line
+           ("Decompressed text matches original text : "
+             & Boolean'Image (Uncompressed_Data = Source));
+      end Decompress;
+   end;
+end Buffer_Demo;

package/vendor/zlib/contrib/ada/mtest.adb

@@ -1,156 +1,156 @@
-----------------------------------------------------------------
---  ZLib for Ada thick binding.                               --
---                                                            --
---  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
---                                                            --
---  Open source license information is in the zlib.ads file.  --
-----------------------------------------------------------------
---  Continuous test for ZLib multithreading. If the test would fail
---  we should provide thread safe allocation routines for the Z_Stream.
---
---  $Id: mtest.adb,v 1.4 2004/07/23 07:49:54 vagul Exp $
-
-with ZLib;
-with Ada.Streams;
-with Ada.Numerics.Discrete_Random;
-with Ada.Text_IO;
-with Ada.Exceptions;
-with Ada.Task_Identification;
-
-procedure MTest is
-   use Ada.Streams;
-   use ZLib;
-
-   Stop : Boolean := False;
-
-   pragma Atomic (Stop);
-
-   subtype Visible_Symbols is Stream_Element range 16#20# .. 16#7E#;
-
-   package Random_Elements is
-      new Ada.Numerics.Discrete_Random (Visible_Symbols);
-
-   task type Test_Task;
-
-   task body Test_Task is
-      Buffer : Stream_Element_Array (1 .. 100_000);
-      Gen : Random_Elements.Generator;
-
-      Buffer_First  : Stream_Element_Offset;
-      Compare_First : Stream_Element_Offset;
-
-      Deflate : Filter_Type;
-      Inflate : Filter_Type;
-
-      procedure Further (Item : in Stream_Element_Array);
-
-      procedure Read_Buffer
-        (Item : out Ada.Streams.Stream_Element_Array;
-         Last : out Ada.Streams.Stream_Element_Offset);
-
-      -------------
-      -- Further --
-      -------------
-
-      procedure Further (Item : in Stream_Element_Array) is
-
-         procedure Compare (Item : in Stream_Element_Array);
-
-         -------------
-         -- Compare --
-         -------------
-
-         procedure Compare (Item : in Stream_Element_Array) is
-            Next_First : Stream_Element_Offset := Compare_First + Item'Length;
-         begin
-            if Buffer (Compare_First .. Next_First - 1) /= Item then
-               raise Program_Error;
-            end if;
-
-            Compare_First := Next_First;
-         end Compare;
-
-         procedure Compare_Write is new ZLib.Write (Write => Compare);
-      begin
-         Compare_Write (Inflate, Item, No_Flush);
-      end Further;
-
-      -----------------
-      -- Read_Buffer --
-      -----------------
-
-      procedure Read_Buffer
-        (Item : out Ada.Streams.Stream_Element_Array;
-         Last : out Ada.Streams.Stream_Element_Offset)
-      is
-         Buff_Diff   : Stream_Element_Offset := Buffer'Last - Buffer_First;
-         Next_First : Stream_Element_Offset;
-      begin
-         if Item'Length <= Buff_Diff then
-            Last := Item'Last;
-
-            Next_First := Buffer_First + Item'Length;
-
-            Item := Buffer (Buffer_First .. Next_First - 1);
-
-            Buffer_First := Next_First;
-         else
-            Last := Item'First + Buff_Diff;
-            Item (Item'First .. Last) := Buffer (Buffer_First .. Buffer'Last);
-            Buffer_First := Buffer'Last + 1;
-         end if;
-      end Read_Buffer;
-
-      procedure Translate is new Generic_Translate
-                                   (Data_In  => Read_Buffer,
-                                    Data_Out => Further);
-
-   begin
-      Random_Elements.Reset (Gen);
-
-      Buffer := (others => 20);
-
-      Main : loop
-         for J in Buffer'Range loop
-            Buffer (J) := Random_Elements.Random (Gen);
-
-            Deflate_Init (Deflate);
-            Inflate_Init (Inflate);
-
-            Buffer_First  := Buffer'First;
-            Compare_First := Buffer'First;
-
-            Translate (Deflate);
-
-            if Compare_First /= Buffer'Last + 1 then
-               raise Program_Error;
-            end if;
-
-            Ada.Text_IO.Put_Line
-              (Ada.Task_Identification.Image
-                 (Ada.Task_Identification.Current_Task)
-               & Stream_Element_Offset'Image (J)
-               & ZLib.Count'Image (Total_Out (Deflate)));
-
-            Close (Deflate);
-            Close (Inflate);
-
-            exit Main when Stop;
-         end loop;
-      end loop Main;
-   exception
-      when E : others =>
-         Ada.Text_IO.Put_Line (Ada.Exceptions.Exception_Information (E));
-         Stop := True;
-   end Test_Task;
-
-   Test : array (1 .. 4) of Test_Task;
-
-   pragma Unreferenced (Test);
-
-   Dummy : Character;
-
-begin
-   Ada.Text_IO.Get_Immediate (Dummy);
-   Stop := True;
-end MTest;
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+--  Continuous test for ZLib multithreading. If the test would fail
+--  we should provide thread safe allocation routines for the Z_Stream.
+--
+--  $Id: mtest.adb,v 1.4 2004/07/23 07:49:54 vagul Exp $
+
+with ZLib;
+with Ada.Streams;
+with Ada.Numerics.Discrete_Random;
+with Ada.Text_IO;
+with Ada.Exceptions;
+with Ada.Task_Identification;
+
+procedure MTest is
+   use Ada.Streams;
+   use ZLib;
+
+   Stop : Boolean := False;
+
+   pragma Atomic (Stop);
+
+   subtype Visible_Symbols is Stream_Element range 16#20# .. 16#7E#;
+
+   package Random_Elements is
+      new Ada.Numerics.Discrete_Random (Visible_Symbols);
+
+   task type Test_Task;
+
+   task body Test_Task is
+      Buffer : Stream_Element_Array (1 .. 100_000);
+      Gen : Random_Elements.Generator;
+
+      Buffer_First  : Stream_Element_Offset;
+      Compare_First : Stream_Element_Offset;
+
+      Deflate : Filter_Type;
+      Inflate : Filter_Type;
+
+      procedure Further (Item : in Stream_Element_Array);
+
+      procedure Read_Buffer
+        (Item : out Ada.Streams.Stream_Element_Array;
+         Last : out Ada.Streams.Stream_Element_Offset);
+
+      -------------
+      -- Further --
+      -------------
+
+      procedure Further (Item : in Stream_Element_Array) is
+
+         procedure Compare (Item : in Stream_Element_Array);
+
+         -------------
+         -- Compare --
+         -------------
+
+         procedure Compare (Item : in Stream_Element_Array) is
+            Next_First : Stream_Element_Offset := Compare_First + Item'Length;
+         begin
+            if Buffer (Compare_First .. Next_First - 1) /= Item then
+               raise Program_Error;
+            end if;
+
+            Compare_First := Next_First;
+         end Compare;
+
+         procedure Compare_Write is new ZLib.Write (Write => Compare);
+      begin
+         Compare_Write (Inflate, Item, No_Flush);
+      end Further;
+
+      -----------------
+      -- Read_Buffer --
+      -----------------
+
+      procedure Read_Buffer
+        (Item : out Ada.Streams.Stream_Element_Array;
+         Last : out Ada.Streams.Stream_Element_Offset)
+      is
+         Buff_Diff   : Stream_Element_Offset := Buffer'Last - Buffer_First;
+         Next_First : Stream_Element_Offset;
+      begin
+         if Item'Length <= Buff_Diff then
+            Last := Item'Last;
+
+            Next_First := Buffer_First + Item'Length;
+
+            Item := Buffer (Buffer_First .. Next_First - 1);
+
+            Buffer_First := Next_First;
+         else
+            Last := Item'First + Buff_Diff;
+            Item (Item'First .. Last) := Buffer (Buffer_First .. Buffer'Last);
+            Buffer_First := Buffer'Last + 1;
+         end if;
+      end Read_Buffer;
+
+      procedure Translate is new Generic_Translate
+                                   (Data_In  => Read_Buffer,
+                                    Data_Out => Further);
+
+   begin
+      Random_Elements.Reset (Gen);
+
+      Buffer := (others => 20);
+
+      Main : loop
+         for J in Buffer'Range loop
+            Buffer (J) := Random_Elements.Random (Gen);
+
+            Deflate_Init (Deflate);
+            Inflate_Init (Inflate);
+
+            Buffer_First  := Buffer'First;
+            Compare_First := Buffer'First;
+
+            Translate (Deflate);
+
+            if Compare_First /= Buffer'Last + 1 then
+               raise Program_Error;
+            end if;
+
+            Ada.Text_IO.Put_Line
+              (Ada.Task_Identification.Image
+                 (Ada.Task_Identification.Current_Task)
+               & Stream_Element_Offset'Image (J)
+               & ZLib.Count'Image (Total_Out (Deflate)));
+
+            Close (Deflate);
+            Close (Inflate);
+
+            exit Main when Stop;
+         end loop;
+      end loop Main;
+   exception
+      when E : others =>
+         Ada.Text_IO.Put_Line (Ada.Exceptions.Exception_Information (E));
+         Stop := True;
+   end Test_Task;
+
+   Test : array (1 .. 4) of Test_Task;
+
+   pragma Unreferenced (Test);
+
+   Dummy : Character;
+
+begin
+   Ada.Text_IO.Get_Immediate (Dummy);
+   Stop := True;
+end MTest;