fengming 0.3.10 → 0.3.12

package/docs/channels/signal.md

@@ -1,417 +0,0 @@
----
-summary: "Signal support via signal-cli (native daemon or bbernhard container), setup paths, and number model"
-read_when:
-  - Setting up Signal support
-  - Debugging Signal send/receive
-title: "Signal"
----
-
-Status: external CLI integration. Gateway talks to `signal-cli` over HTTP — either native daemon (JSON-RPC + SSE) or bbernhard/signal-cli-rest-api container (REST + WebSocket).
-
-## Prerequisites
-
-- FengMing installed on your server (Linux flow below tested on Ubuntu 24).
-- One of:
-  - `signal-cli` available on the host (native mode), **or**
-  - `bbernhard/signal-cli-rest-api` Docker container (container mode).
-- A phone number that can receive one verification SMS (for SMS registration path).
-- Browser access for Signal captcha (`signalcaptchas.org`) during registration.
-
-## Quick setup (beginner)
-
-1. Use a **separate Signal number** for the bot (recommended).
-2. Install `signal-cli` (Java required if you use the JVM build).
-3. Choose one setup path:
-   - **Path A (QR link):** `signal-cli link -n "FengMing"` and scan with Signal.
-   - **Path B (SMS register):** register a dedicated number with captcha + SMS verification.
-4. Configure FengMing and restart the gateway.
-5. Send a first DM and approve pairing (`fengming pairing approve signal <CODE>`).
-
-Minimal config:
-
-```json5
-{
-  channels: {
-    signal: {
-      enabled: true,
-      account: "+15551234567",
-      cliPath: "signal-cli",
-      dmPolicy: "pairing",
-      allowFrom: ["+15557654321"],
-    },
-  },
-}
-```
-
-Field reference:
-
-| Field        | Description                                       |
-| ------------ | ------------------------------------------------- |
-| `account`    | Bot phone number in E.164 format (`+15551234567`) |
-| `cliPath`    | Path to `signal-cli` (`signal-cli` if on `PATH`)  |
-| `configPath` | signal-cli config dir passed as `--config`        |
-| `dmPolicy`   | DM access policy (`pairing` recommended)          |
-| `allowFrom`  | Phone numbers or `uuid:<id>` values allowed to DM |
-
-## What it is
-
-- Signal channel via `signal-cli` (not embedded libsignal).
-- Deterministic routing: replies always go back to Signal.
-- DMs share the agent's main session; groups are isolated (`agent:<agentId>:signal:group:<groupId>`).
-
-## Config writes
-
-By default, Signal is allowed to write config updates triggered by `/config set|unset` (requires `commands.config: true`).
-
-Disable with:
-
-```json5
-{
-  channels: { signal: { configWrites: false } },
-}
-```
-
-## The number model (important)
-
-- The gateway connects to a **Signal device** (the `signal-cli` account).
-- If you run the bot on **your personal Signal account**, it will ignore your own messages (loop protection).
-- For "I text the bot and it replies," use a **separate bot number**.
-
-## Setup path A: link existing Signal account (QR)
-
-1. Install `signal-cli` (JVM or native build).
-2. Link a bot account:
-   - `signal-cli link -n "FengMing"` then scan the QR in Signal.
-3. Configure Signal and start the gateway.
-
-Example:
-
-```json5
-{
-  channels: {
-    signal: {
-      enabled: true,
-      account: "+15551234567",
-      cliPath: "signal-cli",
-      dmPolicy: "pairing",
-      allowFrom: ["+15557654321"],
-    },
-  },
-}
-```
-
-Multi-account support: use `channels.signal.accounts` with per-account config and optional `name`. See [`gateway/configuration`](/gateway/config-channels#multi-account-all-channels) for the shared pattern.
-
-## Setup path B: register dedicated bot number (SMS, Linux)
-
-Use this when you want a dedicated bot number instead of linking an existing Signal app account.
-
-1. Get a number that can receive SMS (or voice verification for landlines).
-   - Use a dedicated bot number to avoid account/session conflicts.
-2. Install `signal-cli` on the gateway host:
-
-```bash
-VERSION=$(curl -Ls -o /dev/null -w %{url_effective} https://github.com/AsamK/signal-cli/releases/latest | sed -e 's/^.*\/v//')
-curl -L -O "https://github.com/AsamK/signal-cli/releases/download/v${VERSION}/signal-cli-${VERSION}-Linux-native.tar.gz"
-sudo tar xf "signal-cli-${VERSION}-Linux-native.tar.gz" -C /opt
-sudo ln -sf /opt/signal-cli /usr/local/bin/
-signal-cli --version
-```
-
-If you use the JVM build (`signal-cli-${VERSION}.tar.gz`), install JRE 25+ first.
-Keep `signal-cli` updated; upstream notes that old releases can break as Signal server APIs change.
-
-3. Register and verify the number:
-
-```bash
-signal-cli -a +<BOT_PHONE_NUMBER> register
-```
-
-If captcha is required:
-
-1. Open `https://signalcaptchas.org/registration/generate.html`.
-2. Complete captcha, copy the `signalcaptcha://...` link target from "Open Signal".
-3. Run from the same external IP as the browser session when possible.
-4. Run registration again immediately (captcha tokens expire quickly):
-
-```bash
-signal-cli -a +<BOT_PHONE_NUMBER> register --captcha '<SIGNALCAPTCHA_URL>'
-signal-cli -a +<BOT_PHONE_NUMBER> verify <VERIFICATION_CODE>
-```
-
-4. Configure FengMing, restart gateway, verify channel:
-
-```bash
-# If you run the gateway as a user systemd service:
-systemctl --user restart fengming-gateway.service
-
-# Then verify:
-fengming doctor
-fengming channels status --probe
-```
-
-5. Pair your DM sender:
-   - Send any message to the bot number.
-   - Approve code on the server: `fengming pairing approve signal <PAIRING_CODE>`.
-   - Save the bot number as a contact on your phone to avoid "Unknown contact".
-
-<Warning>
-Registering a phone number account with `signal-cli` can de-authenticate the main Signal app session for that number. Prefer a dedicated bot number, or use QR link mode if you need to keep your existing phone app setup.
-</Warning>
-
-Upstream references:
-
-- `signal-cli` README: `https://github.com/AsamK/signal-cli`
-- Captcha flow: `https://github.com/AsamK/signal-cli/wiki/Registration-with-captcha`
-- Linking flow: `https://github.com/AsamK/signal-cli/wiki/Linking-other-devices-(Provisioning)`
-
-## External daemon mode (httpUrl)
-
-If you want to manage `signal-cli` yourself (slow JVM cold starts, container init, or shared CPUs), run the daemon separately and point FengMing at it:
-
-```json5
-{
-  channels: {
-    signal: {
-      httpUrl: "http://127.0.0.1:8080",
-      autoStart: false,
-    },
-  },
-}
-```
-
-This skips auto-spawn and the startup wait inside FengMing. For slow starts when auto-spawning, set `channels.signal.startupTimeoutMs`.
-
-## Container mode (bbernhard/signal-cli-rest-api)
-
-Instead of running `signal-cli` natively, you can use the [bbernhard/signal-cli-rest-api](https://github.com/bbernhard/signal-cli-rest-api) Docker container. This wraps `signal-cli` behind a REST API and WebSocket interface.
-
-Requirements:
-
-- The container **must** run with `MODE=json-rpc` for real-time message receiving.
-- Register or link your Signal account inside the container before connecting FengMing.
-
-Example `docker-compose.yml` service:
-
-```yaml
-signal-cli:
-  image: bbernhard/signal-cli-rest-api:latest
-  environment:
-    MODE: json-rpc
-  ports:
-    - "8080:8080"
-  volumes:
-    - signal-cli-data:/home/.local/share/signal-cli
-```
-
-FengMing config:
-
-```json5
-{
-  channels: {
-    signal: {
-      enabled: true,
-      account: "+15551234567",
-      httpUrl: "http://signal-cli:8080",
-      autoStart: false,
-      apiMode: "container", // or "auto" to detect automatically
-    },
-  },
-}
-```
-
-The `apiMode` field controls which protocol FengMing uses:
-
-| Value         | Behavior                                                                             |
-| ------------- | ------------------------------------------------------------------------------------ |
-| `"auto"`      | (Default) Probes both transports; streaming validates container WebSocket receive    |
-| `"native"`    | Force native signal-cli (JSON-RPC at `/api/v1/rpc`, SSE at `/api/v1/events`)         |
-| `"container"` | Force bbernhard container (REST at `/v2/send`, WebSocket at `/v1/receive/{account}`) |
-
-When `apiMode` is `"auto"`, FengMing caches the detected mode for 30 seconds to avoid repeated probes. Container receive is only selected for streaming after `/v1/receive/{account}` upgrades to WebSocket, which requires `MODE=json-rpc`.
-
-Container mode supports the same Signal channel operations as native mode where the container exposes matching APIs: sends, receives, attachments, typing indicators, read/viewed receipts, reactions, groups, and styled text. FengMing translates its native Signal RPC calls into the container's REST payloads, including `group.{base64(internal_id)}` group IDs and `text_mode: "styled"` for formatted text.
-
-Operational notes:
-
-- Use `autoStart: false` with container mode. FengMing should not spawn a native daemon when `apiMode: "container"` is selected.
-- Use `MODE=json-rpc` for receiving. `MODE=normal` can make `/v1/about` look healthy, but `/v1/receive/{account}` does not WebSocket-upgrade, so FengMing will not select container receive streaming in `auto` mode.
-- Set `apiMode: "container"` when you know the `httpUrl` points at bbernhard's REST API. Set `apiMode: "native"` when you know it points at native `signal-cli` JSON-RPC/SSE. Use `"auto"` when the deployment may vary.
-- Container attachment downloads honor the same media byte limits as native mode. Oversized responses are rejected before being fully buffered when the server sends `Content-Length`, and while streaming otherwise.
-
-## Access control (DMs + groups)
-
-DMs:
-
-- Default: `channels.signal.dmPolicy = "pairing"`.
-- Unknown senders receive a pairing code; messages are ignored until approved (codes expire after 1 hour).
-- Approve via:
-  - `fengming pairing list signal`
-  - `fengming pairing approve signal <CODE>`
-- Pairing is the default token exchange for Signal DMs. Details: [Pairing](/channels/pairing)
-- UUID-only senders (from `sourceUuid`) are stored as `uuid:<id>` in `channels.signal.allowFrom`.
-
-Groups:
-
-- `channels.signal.groupPolicy = open | allowlist | disabled`.
-- `channels.signal.groupAllowFrom` controls which groups or senders can trigger group replies when `allowlist` is set; entries can be Signal group IDs (raw, `group:<id>`, or `signal:group:<id>`), sender phone numbers, `uuid:<id>` values, or `*`.
-- `channels.signal.groups["<group-id>" | "*"]` can override group behavior with `requireMention`, `tools`, and `toolsBySender`.
-- Use `channels.signal.accounts.<id>.groups` for per-account overrides in multi-account setups.
-- Allowlisting a Signal group through `groupAllowFrom` does not disable mention gating by itself. A specifically configured `channels.signal.groups["<group-id>"]` entry processes every group message unless `requireMention=true` is set.
-- Runtime note: if `channels.signal` is completely missing, runtime falls back to `groupPolicy="allowlist"` for group checks (even if `channels.defaults.groupPolicy` is set).
-
-## How it works (behavior)
-
-- Native mode: `signal-cli` runs as a daemon; the gateway reads events via SSE.
-- Container mode: the gateway sends via REST API and receives via WebSocket.
-- Inbound messages are normalized into the shared channel envelope.
-- Replies always route back to the same number or group.
-
-## Media + limits
-
-- Outbound text is chunked to `channels.signal.textChunkLimit` (default 4000).
-- Optional newline chunking: set `channels.signal.chunkMode="newline"` to split on blank lines (paragraph boundaries) before length chunking.
-- Attachments supported (base64 fetched from `signal-cli`).
-- Voice-note attachments use the `signal-cli` filename as a MIME fallback when `contentType` is missing, so audio transcription can still classify AAC voice memos.
-- Default media cap: `channels.signal.mediaMaxMb` (default 8).
-- Use `channels.signal.ignoreAttachments` to skip downloading media.
-- Group history context uses `channels.signal.historyLimit` (or `channels.signal.accounts.*.historyLimit`), falling back to `messages.groupChat.historyLimit`. Set `0` to disable (default 50).
-
-## Typing + read receipts
-
-- **Typing indicators**: FengMing sends typing signals via `signal-cli sendTyping` and refreshes them while a reply is running.
-- **Read receipts**: when `channels.signal.sendReadReceipts` is true, FengMing forwards read receipts for allowed DMs.
-- Signal-cli does not expose read receipts for groups.
-
-## Reactions (message tool)
-
-- Use `message action=react` with `channel=signal`.
-- Targets: sender E.164 or UUID (use `uuid:<id>` from pairing output; bare UUID works too).
-- `messageId` is the Signal timestamp for the message you're reacting to.
-- Group reactions require `targetAuthor` or `targetAuthorUuid`.
-
-Examples:
-
-```
-message action=react channel=signal target=uuid:123e4567-e89b-12d3-a456-426614174000 messageId=1737630212345 emoji=🔥
-message action=react channel=signal target=+15551234567 messageId=1737630212345 emoji=🔥 remove=true
-message action=react channel=signal target=signal:group:<groupId> targetAuthor=uuid:<sender-uuid> messageId=1737630212345 emoji=✅
-```
-
-Config:
-
-- `channels.signal.actions.reactions`: enable/disable reaction actions (default true).
-- `channels.signal.reactionLevel`: `off | ack | minimal | extensive`.
-  - `off`/`ack` disables agent reactions (message tool `react` will error).
-  - `minimal`/`extensive` enables agent reactions and sets the guidance level.
-- Per-account overrides: `channels.signal.accounts.<id>.actions.reactions`, `channels.signal.accounts.<id>.reactionLevel`.
-
-## Approval reactions
-
-Signal exec and plugin approval prompts use the top-level `approvals.exec` and
-`approvals.plugin` routing blocks. Signal does not have a
-`channels.signal.execApprovals` block.
-
-- `👍` approves once.
-- `👎` denies.
-- Use `/approve <id> allow-always` when a request offers persistent approval.
-
-Approval reaction resolution requires explicit Signal approvers from
-`channels.signal.allowFrom`, `channels.signal.defaultTo`, or the matching account-level fields.
-Direct same-chat exec approval prompts can still suppress the duplicate local `/approve` fallback
-without explicit approvers; no-approver group approvals keep the local fallback visible.
-
-## Delivery targets (CLI/cron)
-
-- DMs: `signal:+15551234567` (or plain E.164).
-- UUID DMs: `uuid:<id>` (or bare UUID).
-- Groups: `signal:group:<groupId>`.
-- Usernames: `username:<name>` (if supported by your Signal account).
-
-## Troubleshooting
-
-Run this ladder first:
-
-```bash
-fengming status
-fengming gateway status
-fengming logs --follow
-fengming doctor
-fengming channels status --probe
-```
-
-Then confirm DM pairing state if needed:
-
-```bash
-fengming pairing list signal
-```
-
-Common failures:
-
-- Daemon reachable but no replies: verify account/daemon settings (`httpUrl`, `account`) and receive mode.
-- DMs ignored: sender is pending pairing approval.
-- Group messages ignored: group sender/mention gating blocks delivery.
-- Config validation errors after edits: run `fengming doctor --fix`.
-- Signal missing from diagnostics: confirm `channels.signal.enabled: true`.
-
-Extra checks:
-
-```bash
-fengming pairing list signal
-pgrep -af signal-cli
-grep -i "signal" "/tmp/fengming/fengming-$(date +%Y-%m-%d).log" | tail -20
-```
-
-For triage flow: [/channels/troubleshooting](/channels/troubleshooting).
-
-## Security notes
-
-- `signal-cli` stores account keys locally (typically `~/.local/share/signal-cli/data/`).
-- Back up Signal account state before server migration or rebuild.
-- Keep `channels.signal.dmPolicy: "pairing"` unless you explicitly want broader DM access.
-- SMS verification is only needed for registration or recovery flows, but losing control of the number/account can complicate re-registration.
-
-## Configuration reference (Signal)
-
-Full configuration: [Configuration](/gateway/configuration)
-
-Provider options:
-
-- `channels.signal.enabled`: enable/disable channel startup.
-- `channels.signal.apiMode`: `auto | native | container` (default: auto). See [Container mode](#container-mode-bbernhardsignal-cli-rest-api).
-- `channels.signal.account`: E.164 for the bot account.
-- `channels.signal.cliPath`: path to `signal-cli`.
-- `channels.signal.configPath`: optional `signal-cli --config` directory.
-- `channels.signal.httpUrl`: full daemon URL (overrides host/port).
-- `channels.signal.httpHost`, `channels.signal.httpPort`: daemon bind (default 127.0.0.1:8080).
-- `channels.signal.autoStart`: auto-spawn daemon (default true if `httpUrl` unset).
-- `channels.signal.startupTimeoutMs`: startup wait timeout in ms (cap 120000).
-- `channels.signal.receiveMode`: `on-start | manual`.
-- `channels.signal.ignoreAttachments`: skip attachment downloads.
-- `channels.signal.ignoreStories`: ignore stories from the daemon.
-- `channels.signal.sendReadReceipts`: forward read receipts.
-- `channels.signal.dmPolicy`: `pairing | allowlist | open | disabled` (default: pairing).
-- `channels.signal.allowFrom`: DM allowlist (E.164 or `uuid:<id>`). `open` requires `"*"`. Signal has no usernames; use phone/UUID ids.
-- `channels.signal.groupPolicy`: `open | allowlist | disabled` (default: allowlist).
-- `channels.signal.groupAllowFrom`: group allowlist; accepts Signal group IDs (raw, `group:<id>`, or `signal:group:<id>`), sender E.164 numbers, or `uuid:<id>` values.
-- `channels.signal.groups`: per-group overrides keyed by Signal group id (or `"*"`). Supported fields: `requireMention`, `tools`, `toolsBySender`.
-- `channels.signal.accounts.<id>.groups`: per-account version of `channels.signal.groups` for multi-account setups.
-- `channels.signal.historyLimit`: max group messages to include as context (0 disables).
-- `channels.signal.dmHistoryLimit`: DM history limit in user turns. Per-user overrides: `channels.signal.dms["<phone_or_uuid>"].historyLimit`.
-- `channels.signal.textChunkLimit`: outbound chunk size (chars).
-- `channels.signal.chunkMode`: `length` (default) or `newline` to split on blank lines (paragraph boundaries) before length chunking.
-- `channels.signal.mediaMaxMb`: inbound/outbound media cap (MB).
-
-Related global options:
-
-- `agents.list[].groupChat.mentionPatterns` (Signal does not support native mentions).
-- `messages.groupChat.mentionPatterns` (global fallback).
-- `messages.responsePrefix`.
-
-## Related
-
-- [Channels Overview](/channels) — all supported channels
-- [Pairing](/channels/pairing) — DM authentication and pairing flow
-- [Groups](/channels/groups) — group chat behavior and mention gating
-- [Channel Routing](/channels/channel-routing) — session routing for messages
-- [Security](/gateway/security) — access model and hardening