fengming 0.3.10 → 0.3.12

package/docs/plugins/voice-call.md

@@ -1,942 +0,0 @@
----
-summary: "Place outbound and accept inbound voice calls via Twilio, Telnyx, or Plivo, with optional realtime voice and streaming transcription"
-read_when:
-  - You want to place an outbound voice call from FengMing
-  - You are configuring or developing the voice-call plugin
-  - You need realtime voice or streaming transcription on telephony
-title: "Voice call plugin"
-sidebarTitle: "Voice call"
----
-
-Voice calls for FengMing via a plugin. Supports outbound notifications,
-multi-turn conversations, full-duplex realtime voice, streaming
-transcription, and inbound calls with allowlist policies.
-
-**Current providers:** `twilio` (Programmable Voice + Media Streams),
-`telnyx` (Call Control v2), `plivo` (Voice API + XML transfer + GetInput
-speech), `mock` (dev/no network).
-
-<Note>
-The Voice Call plugin runs **inside the Gateway process**. If you use a
-remote Gateway, install and configure the plugin on the machine running
-the Gateway, then restart the Gateway to load it.
-</Note>
-
-## Quick start
-
-<Steps>
-  <Step title="Install the plugin">
-    <Tabs>
-      <Tab title="From npm">
-        ```bash
-        fengming plugins install @fengming/voice-call
-        ```
-      </Tab>
-      <Tab title="From a local folder (dev)">
-        ```bash
-        PLUGIN_SRC=./path/to/local/voice-call-plugin
-        fengming plugins install "$PLUGIN_SRC"
-        cd "$PLUGIN_SRC" && pnpm install
-        ```
-      </Tab>
-    </Tabs>
-
-    Use the bare package to follow the current official release tag. Pin an
-    exact version only when you need a reproducible install.
-
-    Restart the Gateway afterwards so the plugin loads.
-
-  </Step>
-  <Step title="Configure provider and webhook">
-    Set config under `plugins.entries.voice-call.config` (see
-    [Configuration](#configuration) below for the full shape). At minimum:
-    `provider`, provider credentials, `fromNumber`, and a publicly
-    reachable webhook URL.
-  </Step>
-  <Step title="Verify setup">
-    ```bash
-    fengming voicecall setup
-    ```
-
-    The default output is readable in chat logs and terminals. It checks
-    plugin enablement, provider credentials, webhook exposure, and that
-    only one audio mode (`streaming` or `realtime`) is active. Use
-    `--json` for scripts.
-
-  </Step>
-  <Step title="Smoke test">
-    ```bash
-    fengming voicecall smoke
-    fengming voicecall smoke --to "+15555550123"
-    ```
-
-    Both are dry runs by default. Add `--yes` to actually place a short
-    outbound notify call:
-
-    ```bash
-    fengming voicecall smoke --to "+15555550123" --yes
-    ```
-
-  </Step>
-</Steps>
-
-<Warning>
-For Twilio, Telnyx, and Plivo, setup must resolve to a **public webhook URL**.
-If `publicUrl`, the tunnel URL, the Tailscale URL, or the serve fallback
-resolves to loopback or private network space, setup fails instead of
-starting a provider that cannot receive carrier webhooks.
-</Warning>
-
-## Configuration
-
-If `enabled: true` but the selected provider is missing credentials,
-Gateway startup logs a setup-incomplete warning with the missing keys and
-skips starting the runtime. Commands, RPC calls, and agent tools still
-return the exact missing provider configuration when used.
-
-<Note>
-Voice-call credentials accept SecretRefs. `plugins.entries.voice-call.config.twilio.authToken`, `plugins.entries.voice-call.config.realtime.providers.*.apiKey`, `plugins.entries.voice-call.config.streaming.providers.*.apiKey`, and `plugins.entries.voice-call.config.tts.providers.*.apiKey` resolve through the standard SecretRef surface; see [SecretRef credential surface](/reference/secretref-credential-surface).
-</Note>
-
-```json5
-{
-  plugins: {
-    entries: {
-      "voice-call": {
-        enabled: true,
-        config: {
-          provider: "twilio", // or "telnyx" | "plivo" | "mock"
-          fromNumber: "+15550001234", // or TWILIO_FROM_NUMBER for Twilio
-          toNumber: "+15550005678",
-          sessionScope: "per-phone", // per-phone | per-call
-          numbers: {
-            "+15550009999": {
-              inboundGreeting: "Silver Fox Cards, how can I help?",
-              responseSystemPrompt: "You are a concise baseball card specialist.",
-              tts: {
-                providers: {
-                  openai: { speakerVoice: "alloy" },
-                },
-              },
-            },
-          },
-
-          twilio: {
-            accountSid: "ACxxxxxxxx",
-            authToken: "...",
-          },
-          telnyx: {
-            apiKey: "...",
-            connectionId: "...",
-            // Telnyx webhook public key from the Mission Control Portal
-            // (Base64; can also be set via TELNYX_PUBLIC_KEY).
-            publicKey: "...",
-          },
-          plivo: {
-            authId: "MAxxxxxxxxxxxxxxxxxxxx",
-            authToken: "...",
-          },
-
-          // Webhook server
-          serve: {
-            port: 3334,
-            path: "/voice/webhook",
-          },
-
-          // Webhook security (recommended for tunnels/proxies)
-          webhookSecurity: {
-            allowedHosts: ["voice.example.com"],
-            trustedProxyIPs: ["100.64.0.1"],
-          },
-
-          // Public exposure (pick one)
-          // publicUrl: "https://example.ngrok.app/voice/webhook",
-          // tunnel: { provider: "ngrok" },
-          // tailscale: { mode: "funnel", path: "/voice/webhook" },
-
-          outbound: {
-            defaultMode: "notify", // notify | conversation
-          },
-
-          streaming: { enabled: true /* see Streaming transcription */ },
-          realtime: { enabled: false /* see Realtime voice */ },
-        },
-      },
-    },
-  },
-}
-```
-
-<AccordionGroup>
-  <Accordion title="Provider exposure and security notes">
-    - Twilio, Telnyx, and Plivo all require a **publicly reachable** webhook URL.
-    - `mock` is a local dev provider (no network calls).
-    - Telnyx requires `telnyx.publicKey` (or `TELNYX_PUBLIC_KEY`) unless `skipSignatureVerification` is true.
-    - `skipSignatureVerification` is for local testing only.
-    - On ngrok free tier, set `publicUrl` to the exact ngrok URL; signature verification is always enforced.
-    - `tunnel.allowNgrokFreeTierLoopbackBypass: true` allows Twilio webhooks with invalid signatures **only** when `tunnel.provider="ngrok"` and `serve.bind` is loopback (ngrok local agent). Local dev only.
-    - Ngrok free-tier URLs can change or add interstitial behaviour; if `publicUrl` drifts, Twilio signatures fail. Production: prefer a stable domain or a Tailscale funnel.
-
-  </Accordion>
-  <Accordion title="Streaming connection caps">
-    - `streaming.preStartTimeoutMs` closes sockets that never send a valid `start` frame.
-    - `streaming.maxPendingConnections` caps total unauthenticated pre-start sockets.
-    - `streaming.maxPendingConnectionsPerIp` caps unauthenticated pre-start sockets per source IP.
-    - `streaming.maxConnections` caps total open media stream sockets (pending + active).
-
-  </Accordion>
-  <Accordion title="Legacy config migrations">
-    Older configs using `provider: "log"`, `twilio.from`, or legacy
-    `streaming.*` OpenAI keys are rewritten by `fengming doctor --fix`.
-    Runtime fallback still accepts the old voice-call keys for now, but
-    the rewrite path is `fengming doctor --fix` and the compat shim is
-    temporary.
-
-    Auto-migrated streaming keys:
-
-    - `streaming.sttProvider` → `streaming.provider`
-    - `streaming.openaiApiKey` → `streaming.providers.openai.apiKey`
-    - `streaming.sttModel` → `streaming.providers.openai.model`
-    - `streaming.silenceDurationMs` → `streaming.providers.openai.silenceDurationMs`
-    - `streaming.vadThreshold` → `streaming.providers.openai.vadThreshold`
-
-  </Accordion>
-</AccordionGroup>
-
-## Session scope
-
-By default, Voice Call uses `sessionScope: "per-phone"` so repeat calls from
-the same caller keep conversation memory. Set `sessionScope: "per-call"` when
-each carrier call should start with fresh context, for example reception,
-booking, IVR, or Google Meet bridge flows where the same phone number may
-represent different meetings.
-
-## Realtime voice conversations
-
-`realtime` selects a full-duplex realtime voice provider for live call
-audio. It is separate from `streaming`, which only forwards audio to
-realtime transcription providers.
-
-<Warning>
-`realtime.enabled` cannot be combined with `streaming.enabled`. Pick one
-audio mode per call.
-</Warning>
-
-Current runtime behaviour:
-
-- `realtime.enabled` is supported for Twilio Media Streams.
-- `realtime.provider` is optional. If unset, Voice Call uses the first registered realtime voice provider.
-- Bundled realtime voice providers: Google Gemini Live (`google`) and OpenAI (`openai`), registered by their provider plugins.
-- Provider-owned raw config lives under `realtime.providers.<providerId>`.
-- Voice Call exposes the shared `fengming_agent_consult` realtime tool by default. The realtime model can call it when the caller asks for deeper reasoning, current information, or normal FengMing tools.
-- `realtime.consultPolicy` optionally adds guidance for when the realtime model should call `fengming_agent_consult`.
-- `realtime.agentContext.enabled` is default-off. When enabled, Voice Call injects a bounded agent identity and selected workspace-file capsule into the realtime provider instructions at session setup.
-- `realtime.fastContext.enabled` is default-off. When enabled, Voice Call first searches indexed memory/session context for the consult question and returns those snippets to the realtime model within `realtime.fastContext.timeoutMs` before falling back to the full consult agent only if `realtime.fastContext.fallbackToConsult` is true.
-- If `realtime.provider` points at an unregistered provider, or no realtime voice provider is registered at all, Voice Call logs a warning and skips realtime media instead of failing the whole plugin.
-- Consult session keys reuse the stored call session when available, then fall back to the configured `sessionScope` (`per-phone` by default, or `per-call` for isolated calls).
-
-### Tool policy
-
-`realtime.toolPolicy` controls the consult run:
-
-| Policy           | Behavior                                                                                                                                 |
-| ---------------- | ---------------------------------------------------------------------------------------------------------------------------------------- |
-| `safe-read-only` | Expose the consult tool and limit the regular agent to `read`, `web_search`, `web_fetch`, `x_search`, `memory_search`, and `memory_get`. |
-| `owner`          | Expose the consult tool and let the regular agent use the normal agent tool policy.                                                      |
-| `none`           | Do not expose the consult tool. Custom `realtime.tools` are still passed through to the realtime provider.                               |
-
-`realtime.consultPolicy` controls only the realtime model instructions:
-
-| Policy        | Guidance                                                                                        |
-| ------------- | ----------------------------------------------------------------------------------------------- |
-| `auto`        | Keep the default prompt and let the provider decide when to call the consult tool.              |
-| `substantive` | Answer simple conversational glue directly and consult before facts, memory, tools, or context. |
-| `always`      | Consult before every substantive answer.                                                        |
-
-### Agent voice context
-
-Enable `realtime.agentContext` when the voice bridge should sound like the
-configured FengMing agent without paying a full agent-consult round trip on
-ordinary turns. The context capsule is added once when the realtime session is
-created, so it does not add per-turn latency. Calls to
-`fengming_agent_consult` still run the full FengMing agent and should be used
-for tool work, current information, memory lookups, or workspace state.
-
-```json5
-{
-  plugins: {
-    entries: {
-      "voice-call": {
-        config: {
-          agentId: "main",
-          realtime: {
-            enabled: true,
-            provider: "google",
-            toolPolicy: "safe-read-only",
-            consultPolicy: "substantive",
-            agentContext: {
-              enabled: true,
-              maxChars: 6000,
-              includeIdentity: true,
-              includeWorkspaceFiles: true,
-              files: ["SOUL.md", "IDENTITY.md", "USER.md"],
-            },
-          },
-        },
-      },
-    },
-  },
-}
-```
-
-### Realtime provider examples
-
-<Tabs>
-  <Tab title="Google Gemini Live">
-    Defaults: API key from `realtime.providers.google.apiKey`,
-    `GEMINI_API_KEY`, or `GOOGLE_GENERATIVE_AI_API_KEY`; model
-    `gemini-2.5-flash-native-audio-preview-12-2025`; voice `Kore`.
-    `sessionResumption` and `contextWindowCompression` default on for longer,
-    reconnectable calls. Use `silenceDurationMs`, `startSensitivity`, and
-    `endSensitivity` to tune faster turn-taking on telephony audio.
-
-    ```json5
-    {
-      plugins: {
-        entries: {
-          "voice-call": {
-            config: {
-              provider: "twilio",
-              inboundPolicy: "allowlist",
-              allowFrom: ["+15550005678"],
-              realtime: {
-                enabled: true,
-                provider: "google",
-                instructions: "Speak briefly. Call fengming_agent_consult before using deeper tools.",
-                toolPolicy: "safe-read-only",
-                consultPolicy: "substantive",
-                consultThinkingLevel: "low",
-                consultFastMode: true,
-                agentContext: { enabled: true },
-                providers: {
-                  google: {
-                    apiKey: "${GEMINI_API_KEY}",
-                    model: "gemini-2.5-flash-native-audio-preview-12-2025",
-                    speakerVoice: "Kore",
-                    silenceDurationMs: 500,
-                    startSensitivity: "high",
-                  },
-                },
-              },
-            },
-          },
-        },
-      },
-    }
-    ```
-
-  </Tab>
-  <Tab title="OpenAI">
-    ```json5
-    {
-      plugins: {
-        entries: {
-          "voice-call": {
-            config: {
-              realtime: {
-                enabled: true,
-                provider: "openai",
-                providers: {
-                  openai: { apiKey: "${OPENAI_API_KEY}" },
-                },
-              },
-            },
-          },
-        },
-      },
-    }
-    ```
-  </Tab>
-</Tabs>
-
-See [Google provider](/providers/google) and
-[OpenAI provider](/providers/openai) for provider-specific realtime voice
-options.
-
-## Streaming transcription
-
-`streaming` selects a realtime transcription provider for live call audio.
-
-Current runtime behavior:
-
-- `streaming.provider` is optional. If unset, Voice Call uses the first registered realtime transcription provider.
-- Bundled realtime transcription providers: Deepgram (`deepgram`), ElevenLabs (`elevenlabs`), Mistral (`mistral`), OpenAI (`openai`), and xAI (`xai`), registered by their provider plugins.
-- Provider-owned raw config lives under `streaming.providers.<providerId>`.
-- After Twilio sends an accepted stream `start` message, Voice Call registers the stream immediately, queues inbound media through the transcription provider while the provider connects, and starts the initial greeting only after realtime transcription is ready.
-- If `streaming.provider` points at an unregistered provider, or none is registered, Voice Call logs a warning and skips media streaming instead of failing the whole plugin.
-
-### Streaming provider examples
-
-<Tabs>
-  <Tab title="OpenAI">
-    Defaults: API key `streaming.providers.openai.apiKey` or
-    `OPENAI_API_KEY`; model `gpt-4o-transcribe`; `silenceDurationMs: 800`;
-    `vadThreshold: 0.5`.
-
-    ```json5
-    {
-      plugins: {
-        entries: {
-          "voice-call": {
-            config: {
-              streaming: {
-                enabled: true,
-                provider: "openai",
-                streamPath: "/voice/stream",
-                providers: {
-                  openai: {
-                    apiKey: "sk-...", // optional if OPENAI_API_KEY is set
-                    model: "gpt-4o-transcribe",
-                    silenceDurationMs: 800,
-                    vadThreshold: 0.5,
-                  },
-                },
-              },
-            },
-          },
-        },
-      },
-    }
-    ```
-
-  </Tab>
-  <Tab title="xAI">
-    Defaults: API key `streaming.providers.xai.apiKey` or `XAI_API_KEY`;
-    endpoint `wss://api.x.ai/v1/stt`; encoding `mulaw`; sample rate `8000`;
-    `endpointingMs: 800`; `interimResults: true`.
-
-    ```json5
-    {
-      plugins: {
-        entries: {
-          "voice-call": {
-            config: {
-              streaming: {
-                enabled: true,
-                provider: "xai",
-                streamPath: "/voice/stream",
-                providers: {
-                  xai: {
-                    apiKey: "${XAI_API_KEY}", // optional if XAI_API_KEY is set
-                    endpointingMs: 800,
-                    language: "en",
-                  },
-                },
-              },
-            },
-          },
-        },
-      },
-    }
-    ```
-
-  </Tab>
-</Tabs>
-
-## TTS for calls
-
-Voice Call uses the core `messages.tts` configuration for streaming
-speech on calls. You can override it under the plugin config with the
-**same shape** — it deep-merges with `messages.tts`.
-
-```json5
-{
-  tts: {
-    provider: "elevenlabs",
-    providers: {
-      elevenlabs: {
-        speakerVoiceId: "pMsXgVXv3BLzUgSXRplE",
-        modelId: "eleven_multilingual_v2",
-      },
-    },
-  },
-}
-```
-
-<Warning>
-**Microsoft speech is ignored for voice calls.** Telephony audio needs PCM;
-the current Microsoft transport does not expose telephony PCM output.
-</Warning>
-
-Behavior notes:
-
-- Legacy `tts.<provider>` keys inside plugin config (`openai`, `elevenlabs`, `microsoft`, `edge`) are repaired by `fengming doctor --fix`; committed config should use `tts.providers.<provider>`.
-- Core TTS is used when Twilio media streaming is enabled; otherwise calls fall back to provider-native voices.
-- If a Twilio media stream is already active, Voice Call does not fall back to TwiML `<Say>`. If telephony TTS is unavailable in that state, the playback request fails instead of mixing two playback paths.
-- When telephony TTS falls back to a secondary provider, Voice Call logs a warning with the provider chain (`from`, `to`, `attempts`) for debugging.
-- When Twilio barge-in or stream teardown clears the pending TTS queue, queued playback requests settle instead of hanging callers awaiting playback completion.
-
-### TTS examples
-
-<Tabs>
-  <Tab title="Core TTS only">
-```json5
-{
-  messages: {
-    tts: {
-      provider: "openai",
-      providers: {
-        openai: { speakerVoice: "alloy" },
-      },
-    },
-  },
-}
-```
-  </Tab>
-  <Tab title="Override to ElevenLabs (calls only)">
-```json5
-{
-  plugins: {
-    entries: {
-      "voice-call": {
-        config: {
-          tts: {
-            provider: "elevenlabs",
-            providers: {
-              elevenlabs: {
-                apiKey: "elevenlabs_key",
-                speakerVoiceId: "pMsXgVXv3BLzUgSXRplE",
-                modelId: "eleven_multilingual_v2",
-              },
-            },
-          },
-        },
-      },
-    },
-  },
-}
-```
-  </Tab>
-  <Tab title="OpenAI model override (deep-merge)">
-```json5
-{
-  plugins: {
-    entries: {
-      "voice-call": {
-        config: {
-          tts: {
-            providers: {
-              openai: {
-                model: "gpt-4o-mini-tts",
-                speakerVoice: "marin",
-              },
-            },
-          },
-        },
-      },
-    },
-  },
-}
-```
-  </Tab>
-</Tabs>
-
-## Inbound calls
-
-Inbound policy defaults to `disabled`. To enable inbound calls, set:
-
-```json5
-{
-  inboundPolicy: "allowlist",
-  allowFrom: ["+15550001234"],
-  inboundGreeting: "Hello! How can I help?",
-}
-```
-
-<Warning>
-`inboundPolicy: "allowlist"` is a low-assurance caller-ID screen. The
-plugin normalizes the provider-supplied `From` value and compares it to
-`allowFrom`. Webhook verification authenticates provider delivery and
-payload integrity, but it does **not** prove PSTN/VoIP caller-number
-ownership. Treat `allowFrom` as caller-ID filtering, not strong caller
-identity.
-</Warning>
-
-Auto-responses use the agent system. Tune with `responseModel`,
-`responseSystemPrompt`, and `responseTimeoutMs`.
-
-### Per-number Routing
-
-Use `numbers` when one Voice Call plugin receives calls for multiple phone
-numbers and each number should behave like a different line. For example, one
-number can use a casual personal assistant while another uses a business
-persona, a different response agent, and a different TTS voice.
-
-Routes are selected from the provider-supplied dialed `To` number. Keys must be
-E.164 numbers. When a call arrives, Voice Call resolves the matching route once,
-stores the matched route on the call record, and reuses that effective config
-for the greeting, classic auto-response path, realtime consult path, and TTS
-playback. If no route matches, the global Voice Call config is used.
-Outbound calls do not use `numbers`; pass the outbound target, message, and
-session explicitly when initiating the call.
-
-Route overrides currently support:
-
-- `inboundGreeting`
-- `tts`
-- `agentId`
-- `responseModel`
-- `responseSystemPrompt`
-- `responseTimeoutMs`
-
-The `tts` route value deep-merges over the global Voice Call `tts` config, so
-you can usually override only the provider voice:
-
-```json5
-{
-  inboundGreeting: "Hello from the main line.",
-  responseSystemPrompt: "You are the default voice assistant.",
-  tts: {
-    provider: "openai",
-    providers: {
-      openai: { speakerVoice: "coral" },
-    },
-  },
-  numbers: {
-    "+15550001111": {
-      inboundGreeting: "Silver Fox Cards, how can I help?",
-      responseSystemPrompt: "You are a concise baseball card specialist.",
-      tts: {
-        providers: {
-          openai: { speakerVoice: "alloy" },
-        },
-      },
-    },
-  },
-}
-```
-
-### Spoken output contract
-
-For auto-responses, Voice Call appends a strict spoken-output contract to
-the system prompt:
-
-```text
-{"spoken":"..."}
-```
-
-Voice Call extracts speech text defensively:
-
-- Ignores payloads marked as reasoning/error content.
-- Parses direct JSON, fenced JSON, or inline `"spoken"` keys.
-- Falls back to plain text and removes likely planning/meta lead-in paragraphs.
-
-This keeps spoken playback focused on caller-facing text and avoids
-leaking planning text into audio.
-
-### Conversation startup behavior
-
-For outbound `conversation` calls, first-message handling is tied to live
-playback state:
-
-- Barge-in queue clear and auto-response are suppressed only while the initial greeting is actively speaking.
-- If initial playback fails, the call returns to `listening` and the initial message remains queued for retry.
-- Initial playback for Twilio streaming starts on stream connect without extra delay.
-- Barge-in aborts active playback and clears queued-but-not-yet-playing Twilio TTS entries. Cleared entries resolve as skipped, so follow-up response logic can continue without waiting on audio that will never play.
-- Realtime voice conversations use the realtime stream's own opening turn. Voice Call does **not** post a legacy `<Say>` TwiML update for that initial message, so outbound `<Connect><Stream>` sessions stay attached.
-
-### Twilio stream disconnect grace
-
-When a Twilio media stream disconnects, Voice Call waits **2000 ms** before
-auto-ending the call:
-
-- If the stream reconnects during that window, auto-end is canceled.
-- If no stream re-registers after the grace period, the call is ended to prevent stuck active calls.
-
-## Stale call reaper
-
-Use `staleCallReaperSeconds` to end calls that never receive a terminal
-webhook (for example, notify-mode calls that never complete). The default
-is `0` (disabled).
-
-Recommended ranges:
-
-- **Production:** `120`–`300` seconds for notify-style flows.
-- Keep this value **higher than `maxDurationSeconds`** so normal calls can finish. A good starting point is `maxDurationSeconds + 30–60` seconds.
-
-```json5
-{
-  plugins: {
-    entries: {
-      "voice-call": {
-        config: {
-          maxDurationSeconds: 300,
-          staleCallReaperSeconds: 360,
-        },
-      },
-    },
-  },
-}
-```
-
-## Webhook security
-
-When a proxy or tunnel sits in front of the Gateway, the plugin
-reconstructs the public URL for signature verification. These options
-control which forwarded headers are trusted:
-
-<ParamField path="webhookSecurity.allowedHosts" type="string[]">
-  Allowlist hosts from forwarding headers.
-</ParamField>
-<ParamField path="webhookSecurity.trustForwardingHeaders" type="boolean">
-  Trust forwarded headers without an allowlist.
-</ParamField>
-<ParamField path="webhookSecurity.trustedProxyIPs" type="string[]">
-  Only trust forwarded headers when the request remote IP matches the list.
-</ParamField>
-
-Additional protections:
-
-- Webhook **replay protection** is enabled for Twilio and Plivo. Replayed valid webhook requests are acknowledged but skipped for side effects.
-- Twilio conversation turns include a per-turn token in `<Gather>` callbacks, so stale/replayed speech callbacks cannot satisfy a newer pending transcript turn.
-- Unauthenticated webhook requests are rejected before body reads when the provider's required signature headers are missing.
-- The voice-call webhook uses the shared pre-auth body profile (64 KB / 5 seconds) plus a per-IP in-flight cap before signature verification.
-
-Example with a stable public host:
-
-```json5
-{
-  plugins: {
-    entries: {
-      "voice-call": {
-        config: {
-          publicUrl: "https://voice.example.com/voice/webhook",
-          webhookSecurity: {
-            allowedHosts: ["voice.example.com"],
-          },
-        },
-      },
-    },
-  },
-}
-```
-
-## CLI
-
-```bash
-fengming voicecall call --to "+15555550123" --message "Hello from FengMing"
-fengming voicecall start --to "+15555550123"   # alias for call
-fengming voicecall continue --call-id <id> --message "Any questions?"
-fengming voicecall speak --call-id <id> --message "One moment"
-fengming voicecall dtmf --call-id <id> --digits "ww123456#"
-fengming voicecall end --call-id <id>
-fengming voicecall status --call-id <id>
-fengming voicecall tail
-fengming voicecall latency                      # summarize turn latency from logs
-fengming voicecall expose --mode funnel
-```
-
-When the Gateway is already running, operational `voicecall` commands delegate
-to the Gateway-owned voice-call runtime so the CLI does not bind a second
-webhook server. If no Gateway is reachable, the commands fall back to a
-standalone CLI runtime.
-
-`latency` reads `calls.jsonl` from the default voice-call storage path.
-Use `--file <path>` to point at a different log and `--last <n>` to limit
-analysis to the last N records (default 200). Output includes p50/p90/p99
-for turn latency and listen-wait times.
-
-## Agent tool
-
-Tool name: `voice_call`.
-
-| Action          | Args                                       |
-| --------------- | ------------------------------------------ |
-| `initiate_call` | `message`, `to?`, `mode?`, `dtmfSequence?` |
-| `continue_call` | `callId`, `message`                        |
-| `speak_to_user` | `callId`, `message`                        |
-| `send_dtmf`     | `callId`, `digits`                         |
-| `end_call`      | `callId`                                   |
-| `get_status`    | `callId`                                   |
-
-This repo ships a matching skill doc at `skills/voice-call/SKILL.md`.
-
-## Gateway RPC
-
-| Method               | Args                                       |
-| -------------------- | ------------------------------------------ |
-| `voicecall.initiate` | `to?`, `message`, `mode?`, `dtmfSequence?` |
-| `voicecall.continue` | `callId`, `message`                        |
-| `voicecall.speak`    | `callId`, `message`                        |
-| `voicecall.dtmf`     | `callId`, `digits`                         |
-| `voicecall.end`      | `callId`                                   |
-| `voicecall.status`   | `callId`                                   |
-
-`dtmfSequence` is only valid with `mode: "conversation"`. Notify-mode calls
-should use `voicecall.dtmf` after the call exists if they need post-connect
-digits.
-
-## Troubleshooting
-
-### Setup fails webhook exposure
-
-Run setup from the same environment that runs the Gateway:
-
-```bash
-fengming voicecall setup
-fengming voicecall setup --json
-```
-
-For `twilio`, `telnyx`, and `plivo`, `webhook-exposure` must be green. A
-configured `publicUrl` still fails when it points at local or private network
-space, because the carrier cannot call back into those addresses. Do not use
-`localhost`, `127.0.0.1`, `0.0.0.0`, `10.x`, `172.16.x`-`172.31.x`,
-`192.168.x`, `169.254.x`, `fc00::/7`, or `fd00::/8` as `publicUrl`.
-
-Twilio notify-mode outbound calls send their initial `<Say>` TwiML directly in
-the create-call request, so the first spoken message does not depend on Twilio
-fetching webhook TwiML. A public webhook is still required for status callbacks,
-conversation calls, pre-connect DTMF, realtime streams, and post-connect call
-control.
-
-Use one public exposure path:
-
-```json5
-{
-  plugins: {
-    entries: {
-      "voice-call": {
-        config: {
-          publicUrl: "https://voice.example.com/voice/webhook",
-          // or
-          tunnel: { provider: "ngrok" },
-          // or
-          tailscale: { mode: "funnel", path: "/voice/webhook" },
-        },
-      },
-    },
-  },
-}
-```
-
-After changing config, restart or reload the Gateway, then run:
-
-```bash
-fengming voicecall setup
-fengming voicecall smoke
-```
-
-`voicecall smoke` is a dry run unless you pass `--yes`.
-
-### Provider credentials fail
-
-Check the selected provider and the required credential fields:
-
-- Twilio: `twilio.accountSid`, `twilio.authToken`, and `fromNumber`, or
-  `TWILIO_ACCOUNT_SID`, `TWILIO_AUTH_TOKEN`, and `TWILIO_FROM_NUMBER`.
-- Telnyx: `telnyx.apiKey`, `telnyx.connectionId`, `telnyx.publicKey`, and
-  `fromNumber`.
-- Plivo: `plivo.authId`, `plivo.authToken`, and `fromNumber`.
-
-Credentials must exist on the Gateway host. Editing a local shell profile does
-not affect an already running Gateway until it restarts or reloads its
-environment.
-
-### Calls start but provider webhooks do not arrive
-
-Confirm the provider console points at the exact public webhook URL:
-
-```text
-https://voice.example.com/voice/webhook
-```
-
-Then inspect runtime state:
-
-```bash
-fengming voicecall status --call-id <id>
-fengming voicecall tail
-fengming logs --follow
-```
-
-Common causes:
-
-- `publicUrl` points at a different path than `serve.path`.
-- The tunnel URL changed after the Gateway started.
-- A proxy forwards the request but strips or rewrites host/proto headers.
-- Firewall or DNS routes the public hostname somewhere other than the Gateway.
-- The Gateway was restarted without the Voice Call plugin enabled.
-
-When a reverse proxy or tunnel is in front of the Gateway, set
-`webhookSecurity.allowedHosts` to the public hostname, or use
-`webhookSecurity.trustedProxyIPs` for a known proxy address. Use
-`webhookSecurity.trustForwardingHeaders` only when the proxy boundary is under
-your control.
-
-### Signature verification fails
-
-Provider signatures are checked against the public URL FengMing reconstructs
-from the incoming request. If signatures fail:
-
-- Confirm the provider webhook URL exactly matches `publicUrl`, including
-  scheme, host, and path.
-- For ngrok free-tier URLs, update `publicUrl` when the tunnel hostname changes.
-- Ensure the proxy preserves the original host and proto headers, or configure
-  `webhookSecurity.allowedHosts`.
-- Do not enable `skipSignatureVerification` outside local testing.
-
-### Google Meet Twilio joins fail
-
-Google Meet uses this plugin for Twilio dial-in joins. First verify Voice Call:
-
-```bash
-fengming voicecall setup
-fengming voicecall smoke --to "+15555550123"
-```
-
-Then verify the Google Meet transport explicitly:
-
-```bash
-fengming googlemeet setup --transport twilio
-```
-
-If Voice Call is green but the Meet participant never joins, check the Meet
-dial-in number, PIN, and `--dtmf-sequence`. The phone call can be healthy while
-the meeting rejects or ignores an incorrect DTMF sequence.
-
-Google Meet starts the Twilio phone leg through `voicecall.start` with a
-pre-connect DTMF sequence. PIN-derived sequences include the Google Meet plugin's
-`voiceCall.dtmfDelayMs` as leading Twilio wait digits. The default is 12 seconds
-because Meet dial-in prompts can arrive late. Voice Call then redirects back to
-realtime handling before the intro greeting is requested.
-
-Use `fengming logs --follow` for the live phase trace. A healthy Twilio Meet
-join logs this order:
-
-- Google Meet delegates the Twilio join to Voice Call.
-- Voice Call stores pre-connect DTMF TwiML.
-- Twilio initial TwiML is consumed and served before realtime handling.
-- Voice Call serves realtime TwiML for the Twilio call.
-- Google Meet requests intro speech with `voicecall.speak` after the post-DTMF delay.
-
-`fengming voicecall tail` still shows persisted call records; it is useful for
-call state and transcripts, but not every webhook/realtime transition appears
-there.
-
-### Realtime call has no speech
-
-Confirm only one audio mode is enabled. `realtime.enabled` and
-`streaming.enabled` cannot both be true.
-
-For realtime Twilio calls, also verify:
-
-- A realtime provider plugin is loaded and registered.
-- `realtime.provider` is unset or names a registered provider.
-- The provider API key is available to the Gateway process.
-- `fengming logs --follow` shows realtime TwiML served, the realtime bridge
-  started, and the initial greeting queued.
-
-## Related
-
-- [Talk mode](/nodes/talk)
-- [Text-to-speech](/tools/tts)
-- [Voice wake](/nodes/voicewake)