npm - electrobun - Versions diffs - 0.0.1 → 0.0.2 - Mend

electrobun 0.0.1 → 0.0.2

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.

Files changed (667) hide show

package/src/bsdiff/zstd/contrib/snap/snapcraft.yaml DELETED Viewed

@@ -1,28 +0,0 @@
-name: zstd
-version: git
-summary: Zstandard - Fast real-time compression algorithm
-description: |
-  Zstandard, or zstd as short version, is a fast lossless compression
-  algorithm, targeting real-time compression scenarios at zlib-level and better
-  compression ratios. It's backed by a very fast entropy stage, provided by
-  Huff0 and FSE library
-grade: devel # must be 'stable' to release into candidate/stable channels
-confinement: devmode # use 'strict' once you have the right plugs and slots
-apps:
-  zstd:
-    command: usr/local/bin/zstd
-    plugs: [home, removable-media]
-  zstdgrep:
-    command: usr/local/bin/zstdgrep
-    plugs: [home, removable-media]
-  zstdless:
-    command: usr/local/bin/zstdless
-    plugs: [home, removable-media]
-parts:
-  zstd:
-    source: .
-    plugin: make
-    build-packages: [g++]

package/src/bsdiff/zstd/doc/README.md DELETED Viewed

@@ -1,26 +0,0 @@
-Zstandard Documentation
-=======================
-This directory contains material defining the Zstandard format,
-as well as detailed instructions to use `zstd` library.
-__`zstd_manual.html`__ : Documentation of `zstd.h` API, in html format.
-Unfortunately, Github doesn't display `html` files in parsed format, just as source code.
-For a readable display of html API documentation of latest release,
-use this link: [https://raw.githack.com/facebook/zstd/release/doc/zstd_manual.html](https://raw.githack.com/facebook/zstd/release/doc/zstd_manual.html) .
-__`zstd_compression_format.md`__ : This document defines the Zstandard compression format.
-Compliant decoders must adhere to this document,
-and compliant encoders must generate data that follows it.
-Should you look for resources to develop your own port of Zstandard algorithm,
-you may find the following resources useful :
-__`educational_decoder`__ : This directory contains an implementation of a Zstandard decoder,
-compliant with the Zstandard compression format.
-It can be used, for example, to better understand the format,
-or as the basis for a separate implementation of Zstandard decoder.
-[__`decode_corpus`__](https://github.com/facebook/zstd/tree/dev/tests#decodecorpus---tool-to-generate-zstandard-frames-for-decoder-testing) :
-This tool, stored in `/tests` directory, is able to generate random valid frames,
-which is useful if you wish to test your decoder and verify it fully supports the specification.

package/src/bsdiff/zstd/doc/decompressor_errata.md DELETED Viewed

@@ -1,148 +0,0 @@
-Decompressor Errata
-===================
-This document captures known decompressor bugs, where the decompressor rejects a valid zstd frame.
-Each entry will contain:
-1. The last affected decompressor versions.
-2. The decompressor components affected.
-2. Whether the compressed frame could ever be produced by the reference compressor.
-3. An example frame (hexadecimal string when it can be short enough, link to golden file otherwise)
-4. A description of the bug.
-The document is in reverse chronological order, with the bugs that affect the most recent zstd decompressor versions listed first.
-No sequence using the 2-bytes format
-------------------------------------------------
-**Last affected version**: v1.5.5
-**Affected decompressor component(s)**: Library & CLI
-**Produced by the reference compressor**: No
-**Example Frame**: see zstd/tests/golden-decompression/zeroSeq_2B.zst
-The zstd decoder incorrectly expects FSE tables when there are 0 sequences present in the block
-if the value 0 is encoded using the 2-bytes format.
-Instead, it should immediately end the sequence section, and move on to next block.
-This situation was never generated by the reference compressor,
-because representing 0 sequences with the 2-bytes format is inefficient
-(the 1-byte format is always used in this case).
-Compressed block with a size of exactly 128 KB
-------------------------------------------------
-**Last affected version**: v1.5.2
-**Affected decompressor component(s)**: Library & CLI
-**Produced by the reference compressor**: No
-**Example Frame**: see zstd/tests/golden-decompression/block-128k.zst
-The zstd decoder incorrectly rejected blocks of type `Compressed_Block` when their size was exactly 128 KB.
-Note that `128 KB - 1` was accepted, and `128 KB + 1` is forbidden by the spec.
-This type of block was never generated by the reference compressor.
-These blocks used to be disallowed by the spec up until spec version 0.3.2 when the restriction was lifted by [PR#1689](https://github.com/facebook/zstd/pull/1689).
-> A Compressed_Block has the extra restriction that Block_Size is always strictly less than the decompressed size. If this condition cannot be respected, the block must be sent uncompressed instead (Raw_Block).
-Compressed block with 0 literals and 0 sequences
-------------------------------------------------
-**Last affected version**: v1.5.2
-**Affected decompressor component(s)**: Library & CLI
-**Produced by the reference compressor**: No
-**Example Frame**: `28b5 2ffd 2000 1500 0000 00`
-The zstd decoder incorrectly rejected blocks of type `Compressed_Block` that encodes literals as `Raw_Literals_Block` with no literals, and has no sequences.
-This type of block was never generated by the reference compressor.
-Additionally, these blocks were disallowed by the spec up until spec version 0.3.2 when the restriction was lifted by [PR#1689](https://github.com/facebook/zstd/pull/1689).
-> A Compressed_Block has the extra restriction that Block_Size is always strictly less than the decompressed size. If this condition cannot be respected, the block must be sent uncompressed instead (Raw_Block).
-First block is RLE block
-------------------------
-**Last affected version**: v1.4.3
-**Affected decompressor component(s)**: CLI only
-**Produced by the reference compressor**: No
-**Example Frame**: `28b5 2ffd a001 0002 0002 0010 000b 0000 00`
-The zstd CLI decompressor rejected cases where the first block was an RLE block whose `Block_Size` is 131072, and the frame contains more than one block.
-This only affected the zstd CLI, and not the library.
-The example is an RLE block with 131072 bytes, followed by a second RLE block with 1 byte.
-The compressor currently works around this limitation by explicitly avoiding producing RLE blocks as the first
-block.
-https://github.com/facebook/zstd/blob/8814aa5bfa74f05a86e55e9d508da177a893ceeb/lib/compress/zstd_compress.c#L3527-L3535
-Tiny FSE Table & Block
-----------------------
-**Last affected version**: v1.3.4
-**Affected decompressor component(s)**: Library & CLI
-**Produced by the reference compressor**: Possibly until version v1.3.4, but probably never
-**Example Frame**: `28b5 2ffd 2027 c500 0080 f3f1 f0ec ebc6 c5c7 f09d 4300 0000 e0e0 0658 0100 603e 52`
-The zstd library rejected blocks of type `Compressed_Block` whose offset of the last table with type `FSE_Compressed_Mode` was less than 4 bytes from the end of the block.
-In more depth, let `Last_Table_Offset` be the offset in the compressed block (excluding the header) that
-the last table with type `FSE_Compressed_Mode` started. If `Block_Content - Last_Table_Offset < 4` then
-the buggy zstd decompressor would reject the block. This occurs when the last serialized table is 2 bytes
-and the bitstream size is 1 byte.
-For example:
-* There is 1 sequence in the block
-* `Literals_Lengths_Mode` is `FSE_Compressed_Mode` & the serialized table size is 2 bytes
-* `Offsets_Mode` is `Predefined_Mode`
-* `Match_Lengths_Mode` is `Predefined_Mode`
-* The bitstream is 1 byte. E.g. there is only one sequence and it fits in 1 byte.
-The total `Block_Content` is `5` bytes, and `Last_Table_Offset` is `2`.
-See the compressor workaround code:
-https://github.com/facebook/zstd/blob/8814aa5bfa74f05a86e55e9d508da177a893ceeb/lib/compress/zstd_compress.c#L2667-L2682
-Magicless format
-----------------------
-**Last affected version**: v1.5.5
-**Affected decompressor component(s)**: Library
-**Produced by the reference compressor**: Yes (example: https://gist.github.com/embg/9940726094f4cf2cef162cffe9319232)
-**Example Frame**: `27 b5 2f fd 00 03 19 00 00 66 6f 6f 3f ba c4 59`
-v1.5.6 fixes several bugs in which the magicless-format decoder rejects valid frames.
-These include but are not limited to:
-* Valid frames that happen to begin with a legacy magic number (little-endian)
-* Valid frames that happen to begin with a skippable magic number (little-endian)
-If you are affected by this issue and cannot update to v1.5.6 or later, there is a
-workaround to recover affected data. Simply prepend the ZSTD magic number
-`0xFD2FB528` (little-endian) to your data and decompress using the standard-format
-decoder.

package/src/bsdiff/zstd/doc/decompressor_permissive.md DELETED Viewed

@@ -1,60 +0,0 @@
-Decompressor Permissiveness to Invalid Data
-===========================================
-This document describes the behavior of the reference decompressor in cases
-where it accepts formally invalid data instead of reporting an error.
-While the reference decompressor *must* decode any compliant frame following
-the specification, its ability to detect erroneous data is on a best effort
-basis: the decoder may accept input data that would be formally invalid,
-when it causes no risk to the decoder, and which detection would cost too much
-complexity or speed regression.
-In practice, the vast majority of invalid data are detected, if only because
-many corruption events are dangerous for the decoder process (such as
-requesting an out-of-bound memory access) and many more are easy to check.
-This document lists a few known cases where invalid data was formerly accepted
-by the decoder, and what has changed since.
-Offset == 0
------------
-**Last affected version**: v1.5.5
-**Produced by the reference compressor**: No
-**Example Frame**: `28b5 2ffd 0000 4500 0008 0002 002f 430b ae`
-If a sequence is decoded with `literals_length = 0` and `offset_value = 3`
-while `Repeated_Offset_1 = 1`, the computed offset will be `0`, which is
-invalid.
-The reference decompressor up to v1.5.5 processes this case as if the computed
-offset was `1`, including inserting `1` into the repeated offset list.
-This prevents the output buffer from remaining uninitialized, thus denying a
-potential attack vector from an untrusted source.
-However, in the rare case where this scenario would be the outcome of a
-transmission or storage error, the decoder relies on the checksum to detect
-the error.
-In newer versions, this case is always detected and reported as a corruption error.
-Non-zeroes reserved bits
-------------------------
-**Last affected version**: v1.5.5
-**Produced by the reference compressor**: No
-The Sequences section of each block has a header, and one of its elements is a
-byte, which describes the compression mode of each symbol.
-This byte contains 2 reserved bits which must be set to zero.
-The reference decompressor up to v1.5.5 just ignores these 2 bits.
-This behavior has no consequence for the rest of the frame decoding process.
-In newer versions, the 2 reserved bits are actively checked for value zero,
-and the decoder reports a corruption error if they are not.

package/src/bsdiff/zstd/doc/educational_decoder/Makefile DELETED Viewed

@@ -1,62 +0,0 @@
-# ################################################################
-# Copyright (c) Meta Platforms, Inc. and affiliates.
-# All rights reserved.
-#
-# This source code is licensed under both the BSD-style license (found in the
-# LICENSE file in the root directory of this source tree) and the GPLv2 (found
-# in the COPYING file in the root directory of this source tree).
-# You may select, at your option, one of the above-listed licenses.
-# ################################################################
-ZSTD ?= zstd   # note: requires zstd installation on local system
-UNAME?= $(shell uname)
-ifeq ($(UNAME), SunOS)
-DIFF ?= gdiff
-else
-DIFF ?= diff
-endif
-HARNESS_FILES=*.c
-MULTITHREAD_LDFLAGS = -pthread
-DEBUGFLAGS= -g -DZSTD_DEBUG=1
-CPPFLAGS += -I$(ZSTDDIR) -I$(ZSTDDIR)/common -I$(ZSTDDIR)/compress \
-            -I$(ZSTDDIR)/dictBuilder -I$(ZSTDDIR)/deprecated -I$(PRGDIR)
-CFLAGS   ?= -O2
-CFLAGS   += -Wall -Wextra -Wcast-qual -Wcast-align -Wshadow                 \
-            -Wstrict-aliasing=1 -Wswitch-enum                               \
-            -Wredundant-decls -Wstrict-prototypes -Wundef                   \
-            -Wvla -Wformat=2 -Winit-self -Wfloat-equal -Wwrite-strings      \
-            -std=c99
-CFLAGS   += $(DEBUGFLAGS)
-CFLAGS   += $(MOREFLAGS)
-FLAGS     = $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) $(MULTITHREAD_LDFLAGS)
-harness: $(HARNESS_FILES)
-	$(CC) $(FLAGS) $^ -o $@
-clean:
-	@$(RM) harness *.o
-	@$(RM) -rf harness.dSYM  # MacOS specific
-test: harness
-	#
-	# Testing single-file decompression with educational decoder
-	#
-	@$(ZSTD) -f README.md -o tmp.zst
-	@./harness tmp.zst tmp
-	@$(DIFF) -s tmp README.md
-	@$(RM) tmp*
-	#
-	# Testing dictionary decompression with education decoder
-	#
-	# note : files are presented multiple for training, to reach minimum threshold
-	@$(ZSTD) --train harness.c zstd_decompress.c zstd_decompress.h README.md \
-                  harness.c zstd_decompress.c zstd_decompress.h README.md \
-                  harness.c zstd_decompress.c zstd_decompress.h README.md \
-                  -o dictionary
-	@$(ZSTD) -f README.md -D dictionary -o tmp.zst
-	@./harness tmp.zst tmp dictionary
-	@$(DIFF) -s tmp README.md
-	@$(RM) tmp* dictionary

package/src/bsdiff/zstd/doc/educational_decoder/README.md DELETED Viewed

@@ -1,36 +0,0 @@
-Educational Decoder
-===================
-`zstd_decompress.c` is a self-contained implementation in C99 of a decoder,
-according to the [Zstandard format specification].
-While it does not implement as many features as the reference decoder,
-such as the streaming API or content checksums, it is written to be easy to
-follow and understand, to help understand how the Zstandard format works.
-It's laid out to match the [format specification],
-so it can be used to understand how complex segments could be implemented.
-It also contains implementations of Huffman and FSE table decoding.
-[Zstandard format specification]: https://github.com/facebook/zstd/blob/dev/doc/zstd_compression_format.md
-[format specification]: https://github.com/facebook/zstd/blob/dev/doc/zstd_compression_format.md
-While the library's primary objective is code clarity,
-it also happens to compile into a small object file.
-The object file can be made even smaller by removing error messages,
-using the macro directive `ZDEC_NO_MESSAGE` at compilation time.
-This can be reduced even further by foregoing dictionary support,
-by defining `ZDEC_NO_DICTIONARY`.
-`harness.c` provides a simple test harness around the decoder:
-    harness <input-file> <output-file> [dictionary]
-As an additional resource to be used with this decoder,
-see the `decodecorpus` tool in the [tests] directory.
-It generates valid Zstandard frames that can be used to verify
-a Zstandard decoder implementation.
-Note that to use the tool to verify this decoder implementation,
-the --content-size flag should be set,
-as this decoder does not handle streaming decoding,
-and so it must know the decompressed size in advance.
-[tests]: https://github.com/facebook/zstd/blob/dev/tests/

package/src/bsdiff/zstd/doc/educational_decoder/harness.c DELETED Viewed

@@ -1,119 +0,0 @@
-/*
- * Copyright (c) Meta Platforms, Inc. and affiliates.
- * All rights reserved.
- *
- * This source code is licensed under both the BSD-style license (found in the
- * LICENSE file in the root directory of this source tree) and the GPLv2 (found
- * in the COPYING file in the root directory of this source tree).
- * You may select, at your option, one of the above-listed licenses.
- */
-#include <stdio.h>
-#include <stdlib.h>
-#include "zstd_decompress.h"
-typedef unsigned char u8;
-// If the data doesn't have decompressed size with it, fallback on assuming the
-// compression ratio is at most 16
-#define MAX_COMPRESSION_RATIO (16)
-// Protect against allocating too much memory for output
-#define MAX_OUTPUT_SIZE ((size_t)1024 * 1024 * 1024)
-// Error message then exit
-#define ERR_OUT(...) { fprintf(stderr, __VA_ARGS__); exit(1); }
-typedef struct {
-    u8* address;
-    size_t size;
-} buffer_s;
-static void freeBuffer(buffer_s b) { free(b.address); }
-static buffer_s read_file(const char *path)
-{
-    FILE* const f = fopen(path, "rb");
-    if (!f) ERR_OUT("failed to open file %s \n", path);
-    fseek(f, 0L, SEEK_END);
-    size_t const size = (size_t)ftell(f);
-    rewind(f);
-    void* const ptr = malloc(size);
-    if (!ptr) ERR_OUT("failed to allocate memory to hold %s \n", path);
-    size_t const read = fread(ptr, 1, size, f);
-    if (read != size) ERR_OUT("error while reading file %s \n", path);
-    fclose(f);
-    buffer_s const b = { ptr, size };
-    return b;
-}
-static void write_file(const char* path, const u8* ptr, size_t size)
-{
-    FILE* const f = fopen(path, "wb");
-    if (!f) ERR_OUT("failed to open file %s \n", path);
-    size_t written = 0;
-    while (written < size) {
-        written += fwrite(ptr+written, 1, size, f);
-        if (ferror(f)) ERR_OUT("error while writing file %s\n", path);
-    }
-    fclose(f);
-}
-int main(int argc, char **argv)
-{
-    if (argc < 3)
-        ERR_OUT("usage: %s <file.zst> <out_path> [dictionary] \n", argv[0]);
-    buffer_s const input = read_file(argv[1]);
-    buffer_s dict = { NULL, 0 };
-    if (argc >= 4) {
-        dict = read_file(argv[3]);
-    }
-    size_t out_capacity = ZSTD_get_decompressed_size(input.address, input.size);
-    if (out_capacity == (size_t)-1) {
-        out_capacity = MAX_COMPRESSION_RATIO * input.size;
-        fprintf(stderr, "WARNING: Compressed data does not contain "
-                        "decompressed size, going to assume the compression "
-                        "ratio is at most %d (decompressed size of at most "
-                        "%u) \n",
-                MAX_COMPRESSION_RATIO, (unsigned)out_capacity);
-    }
-    if (out_capacity > MAX_OUTPUT_SIZE)
-        ERR_OUT("Required output size too large for this implementation \n");
-    u8* const output = malloc(out_capacity);
-    if (!output) ERR_OUT("failed to allocate memory \n");
-    dictionary_t* const parsed_dict = create_dictionary();
-    if (dict.size) {
-#if defined (ZDEC_NO_DICTIONARY)
-        printf("dict.size = %zu \n", dict.size);
-        ERR_OUT("no dictionary support \n");
-#else
-        parse_dictionary(parsed_dict, dict.address, dict.size);
-#endif
-    }
-    size_t const decompressed_size =
-        ZSTD_decompress_with_dict(output, out_capacity,
-                                  input.address, input.size,
-                                  parsed_dict);
-    free_dictionary(parsed_dict);
-    write_file(argv[2], output, decompressed_size);
-    freeBuffer(input);
-    freeBuffer(dict);
-    free(output);
-    return 0;
-}