electrobun 0.0.1 → 0.0.2

package/src/bsdiff/zstd/programs/zstd.1.md

@@ -1,695 +0,0 @@
-zstd(1) -- zstd, zstdmt, unzstd, zstdcat - Compress or decompress .zst files
-============================================================================
-
-SYNOPSIS
---------
-
-`zstd` [<OPTIONS>] [-|<INPUT-FILE>] [-o <OUTPUT-FILE>]
-
-`zstdmt` is equivalent to `zstd -T0`
-
-`unzstd` is equivalent to `zstd -d`
-
-`zstdcat` is equivalent to `zstd -dcf`
-
-
-DESCRIPTION
------------
-`zstd` is a fast lossless compression algorithm and data compression tool,
-with command line syntax similar to `gzip`(1) and `xz`(1).
-It is based on the **LZ77** family, with further FSE & huff0 entropy stages.
-`zstd` offers highly configurable compression speed,
-from fast modes at > 200 MB/s per core,
-to strong modes with excellent compression ratios.
-It also features a very fast decoder, with speeds > 500 MB/s per core,
-which remains roughly stable at all compression settings.
-
-`zstd` command line syntax is generally similar to gzip,
-but features the following few differences:
-
-  - Source files are preserved by default.
-    It's possible to remove them automatically by using the `--rm` command.
-  - When compressing a single file, `zstd` displays progress notifications
-    and result summary by default.
-    Use `-q` to turn them off.
-  - `zstd` displays a short help page when command line is an error.
-    Use `-q` to turn it off.
-  - `zstd` does not accept input from console,
-    though it does accept `stdin` when it's not the console.
-  - `zstd` does not store the input's filename or attributes, only its contents.
-
-`zstd` processes each _file_ according to the selected operation mode.
-If no _files_ are given or _file_ is `-`, `zstd` reads from standard input
-and writes the processed data to standard output.
-`zstd` will refuse to write compressed data to standard output
-if it is a terminal: it will display an error message and skip the file.
-Similarly, `zstd` will refuse to read compressed data from standard input
-if it is a terminal.
-
-Unless `--stdout` or `-o` is specified, _files_ are written to a new file
-whose name is derived from the source _file_ name:
-
-* When compressing, the suffix `.zst` is appended to the source filename to
-  get the target filename.
-* When decompressing, the `.zst` suffix is removed from the source filename to
-  get the target filename
-
-### Concatenation with .zst Files
-It is possible to concatenate multiple `.zst` files. `zstd` will decompress
-such agglomerated file as if it was a single `.zst` file.
-
-OPTIONS
--------
-
-### Integer Suffixes and Special Values
-
-In most places where an integer argument is expected,
-an optional suffix is supported to easily indicate large integers.
-There must be no space between the integer and the suffix.
-
-* `KiB`:
-    Multiply the integer by 1,024 (2\^10).
-    `Ki`, `K`, and `KB` are accepted as synonyms for `KiB`.
-* `MiB`:
-    Multiply the integer by 1,048,576 (2\^20).
-    `Mi`, `M`, and `MB` are accepted as synonyms for `MiB`.
-
-### Operation Mode
-
-If multiple operation mode options are given,
-the last one takes effect.
-
-* `-z`, `--compress`:
-    Compress.
-    This is the default operation mode when no operation mode option is specified
-    and no other operation mode is implied from the command name
-    (for example, `unzstd` implies `--decompress`).
-* `-d`, `--decompress`, `--uncompress`:
-    Decompress.
-* `-t`, `--test`:
-    Test the integrity of compressed _files_.
-    This option is equivalent to `--decompress --stdout > /dev/null`,
-    decompressed data is discarded and checksummed for errors.
-    No files are created or removed.
-* `-b#`:
-    Benchmark file(s) using compression level _#_.
-    See _BENCHMARK_ below for a description of this operation.
-* `--train FILES`:
-    Use _FILES_ as a training set to create a dictionary.
-    The training set should contain a lot of small files (> 100).
-    See _DICTIONARY BUILDER_ below for a description of this operation.
-* `-l`, `--list`:
-    Display information related to a zstd compressed file, such as size, ratio, and checksum.
-    Some of these fields may not be available.
-    This command's output can be augmented with the `-v` modifier.
-
-### Operation Modifiers
-
-* `-#`:
-    selects `#` compression level \[1-19\] (default: 3).
-    Higher compression levels *generally* produce higher compression ratio at the expense of speed and memory.
-    A rough rule of thumb is that compression speed is expected to be divided by 2 every 2 levels.
-    Technically, each level is mapped to a set of advanced parameters (that can also be modified individually, see below).
-    Because the compressor's behavior highly depends on the content to compress, there's no guarantee of a smooth progression from one level to another.
-* `--ultra`:
-    unlocks high compression levels 20+ (maximum 22), using a lot more memory.
-    Note that decompression will also require more memory when using these levels.
-* `--fast[=#]`:
-    switch to ultra-fast compression levels.
-    If `=#` is not present, it defaults to `1`.
-    The higher the value, the faster the compression speed,
-    at the cost of some compression ratio.
-    This setting overwrites compression level if one was set previously.
-    Similarly, if a compression level is set after `--fast`, it overrides it.
-* `-T#`, `--threads=#`:
-    Compress using `#` working threads (default: 1).
-    If `#` is 0, attempt to detect and use the number of physical CPU cores.
-    In all cases, the nb of threads is capped to `ZSTDMT_NBWORKERS_MAX`,
-    which is either 64 in 32-bit mode, or 256 for 64-bit environments.
-    This modifier does nothing if `zstd` is compiled without multithread support.
-* `--single-thread`:
-    Use a single thread for both I/O and compression.
-    As compression is serialized with I/O, this can be slightly slower.
-    Single-thread mode features significantly lower memory usage,
-    which can be useful for systems with limited amount of memory, such as 32-bit systems.
-
-    Note 1: this mode is the only available one when multithread support is disabled.
-
-    Note 2: this mode is different from `-T1`, which spawns 1 compression thread in parallel with I/O.
-    Final compressed result is also slightly different from `-T1`.
-* `--auto-threads={physical,logical} (default: physical)`:
-    When using a default amount of threads via `-T0`, choose the default based on the number
-    of detected physical or logical cores.
-* `--adapt[=min=#,max=#]`:
-    `zstd` will dynamically adapt compression level to perceived I/O conditions.
-    Compression level adaptation can be observed live by using command `-v`.
-    Adaptation can be constrained between supplied `min` and `max` levels.
-    The feature works when combined with multi-threading and `--long` mode.
-    It does not work with `--single-thread`.
-    It sets window size to 8 MiB by default (can be changed manually, see `wlog`).
-    Due to the chaotic nature of dynamic adaptation, compressed result is not reproducible.
-
-    _Note_: at the time of this writing, `--adapt` can remain stuck at low speed
-    when combined with multiple worker threads (>=2).
-* `--long[=#]`:
-    enables long distance matching with `#` `windowLog`, if `#` is not
-    present it defaults to `27`.
-    This increases the window size (`windowLog`) and memory usage for both the
-    compressor and decompressor.
-    This setting is designed to improve the compression ratio for files with
-    long matches at a large distance.
-
-    Note: If `windowLog` is set to larger than 27, `--long=windowLog` or
-    `--memory=windowSize` needs to be passed to the decompressor.
-* `-D DICT`:
-    use `DICT` as Dictionary to compress or decompress FILE(s)
-* `--patch-from FILE`:
-    Specify the file to be used as a reference point for zstd's diff engine.
-    This is effectively dictionary compression with some convenient parameter
-    selection, namely that _windowSize_ > _srcSize_.
-
-    Note: cannot use both this and `-D` together.
-
-    Note: `--long` mode will be automatically activated if _chainLog_ < _fileLog_
-        (_fileLog_ being the _windowLog_ required to cover the whole file). You
-        can also manually force it.
-
-    Note: for all levels, you can use `--patch-from` in `--single-thread` mode
-        to improve compression ratio at the cost of speed.
-
-    Note: for level 19, you can get increased compression ratio at the cost
-        of speed by specifying `--zstd=targetLength=` to be something large
-        (i.e. 4096), and by setting a large `--zstd=chainLog=`.
-* `--rsyncable`:
-    `zstd` will periodically synchronize the compression state to make the
-    compressed file more rsync-friendly.
-    There is a negligible impact to compression ratio,
-    and a potential impact to compression speed, perceptible at higher speeds,
-    for example when combining `--rsyncable` with many parallel worker threads.
-    This feature does not work with `--single-thread`. You probably don't want
-    to use it with long range mode, since it will decrease the effectiveness of
-    the synchronization points, but your mileage may vary.
-* `-C`, `--[no-]check`:
-    add integrity check computed from uncompressed data (default: enabled)
-* `--[no-]content-size`:
-    enable / disable whether or not the original size of the file is placed in
-    the header of the compressed file. The default option is
-    `--content-size` (meaning that the original size will be placed in the header).
-* `--no-dictID`:
-    do not store dictionary ID within frame header (dictionary compression).
-    The decoder will have to rely on implicit knowledge about which dictionary to use,
-    it won't be able to check if it's correct.
-* `-M#`, `--memory=#`:
-    Set a memory usage limit. By default, `zstd` uses 128 MiB for decompression
-    as the maximum amount of memory the decompressor is allowed to use, but you can
-    override this manually if need be in either direction (i.e. you can increase or
-    decrease it).
-
-    This is also used during compression when using with `--patch-from=`. In this case,
-    this parameter overrides that maximum size allowed for a dictionary. (128 MiB).
-
-    Additionally, this can be used to limit memory for dictionary training. This parameter
-    overrides the default limit of 2 GiB. zstd will load training samples up to the memory limit
-    and ignore the rest.
-* `--stream-size=#`:
-    Sets the pledged source size of input coming from a stream. This value must be exact, as it
-    will be included in the produced frame header. Incorrect stream sizes will cause an error.
-    This information will be used to better optimize compression parameters, resulting in
-    better and potentially faster compression, especially for smaller source sizes.
-* `--size-hint=#`:
-    When handling input from a stream, `zstd` must guess how large the source size
-    will be when optimizing compression parameters. If the stream size is relatively
-    small, this guess may be a poor one, resulting in a higher compression ratio than
-    expected. This feature allows for controlling the guess when needed.
-    Exact guesses result in better compression ratios. Overestimates result in slightly
-    degraded compression ratios, while underestimates may result in significant degradation.
-* `--target-compressed-block-size=#`:
-    Attempt to produce compressed blocks of approximately this size.
-    This will split larger blocks in order to approach this target.
-    This feature is notably useful for improved latency, when the receiver can leverage receiving early incomplete data.
-    This parameter defines a loose target: compressed blocks will target this size "on average", but individual blocks can still be larger or smaller.
-    Enabling this feature can decrease compression speed by up to ~10% at level 1.
-    Higher levels will see smaller relative speed regression, becoming invisible at higher settings.
-* `-f`, `--force`:
-    disable input and output checks. Allows overwriting existing files, input
-    from console, output to stdout, operating on links, block devices, etc.
-    During decompression and when the output destination is stdout, pass-through
-    unrecognized formats as-is.
-* `-c`, `--stdout`:
-    write to standard output (even if it is the console); keep original files (disable `--rm`).
-* `-o FILE`:
-    save result into `FILE`.
-    Note that this operation is in conflict with `-c`.
-    If both operations are present on the command line, the last expressed one wins.
-* `--[no-]sparse`:
-    enable / disable sparse FS support,
-    to make files with many zeroes smaller on disk.
-    Creating sparse files may save disk space and speed up decompression by
-    reducing the amount of disk I/O.
-    default: enabled when output is into a file,
-    and disabled when output is stdout.
-    This setting overrides default and can force sparse mode over stdout.
-* `--[no-]pass-through`
-    enable / disable passing through uncompressed files as-is. During
-    decompression when pass-through is enabled, unrecognized formats will be
-    copied as-is from the input to the output. By default, pass-through will
-    occur when the output destination is stdout and the force (`-f`) option is
-    set.
-* `--rm`:
-    remove source file(s) after successful compression or decompression.
-    This command is silently ignored if output is `stdout`.
-    If used in combination with `-o`,
-    triggers a confirmation prompt (which can be silenced with `-f`), as this is a destructive operation.
-* `-k`, `--keep`:
-    keep source file(s) after successful compression or decompression.
-    This is the default behavior.
-* `-r`:
-    operate recursively on directories.
-    It selects all files in the named directory and all its subdirectories.
-    This can be useful both to reduce command line typing,
-    and to circumvent shell expansion limitations,
-    when there are a lot of files and naming breaks the maximum size of a command line.
-* `--filelist FILE`
-    read a list of files to process as content from `FILE`.
-    Format is compatible with `ls` output, with one file per line.
-* `--output-dir-flat DIR`:
-    resulting files are stored into target `DIR` directory,
-    instead of same directory as origin file.
-    Be aware that this command can introduce name collision issues,
-    if multiple files, from different directories, end up having the same name.
-    Collision resolution ensures first file with a given name will be present in `DIR`,
-    while in combination with `-f`, the last file will be present instead.
-* `--output-dir-mirror DIR`:
-    similar to `--output-dir-flat`,
-    the output files are stored underneath target `DIR` directory,
-    but this option will replicate input directory hierarchy into output `DIR`.
-
-    If input directory contains "..", the files in this directory will be ignored.
-    If input directory is an absolute directory (i.e. "/var/tmp/abc"),
-    it will be stored into the "output-dir/var/tmp/abc".
-    If there are multiple input files or directories,
-    name collision resolution will follow the same rules as `--output-dir-flat`.
-* `--format=FORMAT`:
-    compress and decompress in other formats. If compiled with
-    support, zstd can compress to or decompress from other compression algorithm
-    formats. Possibly available options are `zstd`, `gzip`, `xz`, `lzma`, and `lz4`.
-    If no such format is provided, `zstd` is the default.
-* `-h`/`-H`, `--help`:
-    display help/long help and exit
-* `-V`, `--version`:
-    display version number and immediately exit.
-    note that, since it exits, flags specified after `-V` are effectively ignored.
-    Advanced: `-vV` also displays supported formats.
-    `-vvV` also displays POSIX support.
-    `-qV` will only display the version number, suitable for machine reading.
-* `-v`, `--verbose`:
-    verbose mode, display more information
-* `-q`, `--quiet`:
-    suppress warnings, interactivity, and notifications.
-    specify twice to suppress errors too.
-* `--no-progress`:
-    do not display the progress bar, but keep all other messages.
-* `--show-default-cparams`:
-    shows the default compression parameters that will be used for a particular input file, based on the provided compression level and the input size.
-    If the provided file is not a regular file (e.g. a pipe), this flag will output the parameters used for inputs of unknown size.
-* `--exclude-compressed`:
-    only compress files that are not already compressed.
-* `--`:
-    All arguments after `--` are treated as files
-
-
-### gzip Operation Modifiers
-When invoked via a `gzip` symlink, `zstd` will support further
-options that intend to mimic the `gzip` behavior:
-
-* `-n`, `--no-name`:
-    do not store the original filename and timestamps when compressing
-    a file. This is the default behavior and hence a no-op.
-* `--best`:
-    alias to the option `-9`.
-
-
-### Environment Variables
-Employing environment variables to set parameters has security implications.
-Therefore, this avenue is intentionally limited.
-Only `ZSTD_CLEVEL` and `ZSTD_NBTHREADS` are currently supported.
-They set the default compression level and number of threads to use during compression, respectively.
-
-`ZSTD_CLEVEL` can be used to set the level between 1 and 19 (the "normal" range).
-If the value of `ZSTD_CLEVEL` is not a valid integer, it will be ignored with a warning message.
-`ZSTD_CLEVEL` just replaces the default compression level (`3`).
-
-`ZSTD_NBTHREADS` can be used to set the number of threads `zstd` will attempt to use during compression.
-If the value of `ZSTD_NBTHREADS` is not a valid unsigned integer, it will be ignored with a warning message.
-`ZSTD_NBTHREADS` has a default value of (`1`), and is capped at ZSTDMT_NBWORKERS_MAX==200.
-`zstd` must be compiled with multithread support for this variable to have any effect.
-
-They can both be overridden by corresponding command line arguments:
-`-#` for compression level and `-T#` for number of compression threads.
-
-
-ADVANCED COMPRESSION OPTIONS
-----------------------------
-`zstd` provides 22 predefined regular compression levels plus the fast levels.
-A compression level is translated internally into multiple advanced parameters that control the behavior of the compressor
-(one can observe the result of this translation with `--show-default-cparams`).
-These advanced parameters can be overridden using advanced compression options.
-
-### --zstd[=options]:
-The _options_ are provided as a comma-separated list.
-You may specify only the options you want to change and the rest will be
-taken from the selected or default compression level.
-The list of available _options_:
-
-- `strategy`=_strat_, `strat`=_strat_:
-    Specify a strategy used by a match finder.
-
-    There are 9 strategies numbered from 1 to 9, from fastest to strongest:
-    1=`ZSTD_fast`, 2=`ZSTD_dfast`, 3=`ZSTD_greedy`,
-    4=`ZSTD_lazy`, 5=`ZSTD_lazy2`, 6=`ZSTD_btlazy2`,
-    7=`ZSTD_btopt`, 8=`ZSTD_btultra`, 9=`ZSTD_btultra2`.
-
-- `windowLog`=_wlog_, `wlog`=_wlog_:
-    Specify the maximum number of bits for a match distance.
-
-    The higher number of increases the chance to find a match which usually
-    improves compression ratio.
-    It also increases memory requirements for the compressor and decompressor.
-    The minimum _wlog_ is 10 (1 KiB) and the maximum is 30 (1 GiB) on 32-bit
-    platforms and 31 (2 GiB) on 64-bit platforms.
-
-    Note: If `windowLog` is set to larger than 27, `--long=windowLog` or
-    `--memory=windowSize` needs to be passed to the decompressor.
-
-- `hashLog`=_hlog_, `hlog`=_hlog_:
-    Specify the maximum number of bits for a hash table.
-
-    Bigger hash tables cause fewer collisions which usually makes compression
-    faster, but requires more memory during compression.
-
-    The minimum _hlog_ is 6 (64 entries / 256 B) and the maximum is 30 (1B entries / 4 GiB).
-
-- `chainLog`=_clog_, `clog`=_clog_:
-    Specify the maximum number of bits for the secondary search structure,
-    whose form depends on the selected `strategy`.
-
-    Higher numbers of bits increases the chance to find a match which usually
-    improves compression ratio.
-    It also slows down compression speed and increases memory requirements for
-    compression.
-    This option is ignored for the `ZSTD_fast` `strategy`, which only has the primary hash table.
-
-    The minimum _clog_ is 6 (64 entries / 256 B) and the maximum is 29 (512M entries / 2 GiB) on 32-bit platforms
-    and 30 (1B entries / 4 GiB) on 64-bit platforms.
-
-- `searchLog`=_slog_, `slog`=_slog_:
-    Specify the maximum number of searches in a hash chain or a binary tree
-    using logarithmic scale.
-
-    More searches increases the chance to find a match which usually increases
-    compression ratio but decreases compression speed.
-
-    The minimum _slog_ is 1 and the maximum is 'windowLog' - 1.
-
-- `minMatch`=_mml_, `mml`=_mml_:
-    Specify the minimum searched length of a match in a hash table.
-
-    Larger search lengths usually decrease compression ratio but improve
-    decompression speed.
-
-    The minimum _mml_ is 3 and the maximum is 7.
-
-- `targetLength`=_tlen_, `tlen`=_tlen_:
-    The impact of this field vary depending on selected strategy.
-
-    For `ZSTD_btopt`, `ZSTD_btultra` and `ZSTD_btultra2`, it specifies
-    the minimum match length that causes match finder to stop searching.
-    A larger `targetLength` usually improves compression ratio
-    but decreases compression speed.
-
-    For `ZSTD_fast`, it triggers ultra-fast mode when > 0.
-    The value represents the amount of data skipped between match sampling.
-    Impact is reversed: a larger `targetLength` increases compression speed
-    but decreases compression ratio.
-
-    For all other strategies, this field has no impact.
-
-    The minimum _tlen_ is 0 and the maximum is 128 KiB.
-
-- `overlapLog`=_ovlog_,  `ovlog`=_ovlog_:
-    Determine `overlapSize`, amount of data reloaded from previous job.
-    This parameter is only available when multithreading is enabled.
-    Reloading more data improves compression ratio, but decreases speed.
-
-    The minimum _ovlog_ is 0, and the maximum is 9.
-    1 means "no overlap", hence completely independent jobs.
-    9 means "full overlap", meaning up to `windowSize` is reloaded from previous job.
-    Reducing _ovlog_ by 1 reduces the reloaded amount by a factor 2.
-    For example, 8 means "windowSize/2", and 6 means "windowSize/8".
-    Value 0 is special and means "default": _ovlog_ is automatically determined by `zstd`.
-    In which case, _ovlog_ will range from 6 to 9, depending on selected _strat_.
-
-- `ldmHashLog`=_lhlog_, `lhlog`=_lhlog_:
-    Specify the maximum size for a hash table used for long distance matching.
-
-    This option is ignored unless long distance matching is enabled.
-
-    Bigger hash tables usually improve compression ratio at the expense of more
-    memory during compression and a decrease in compression speed.
-
-    The minimum _lhlog_ is 6 and the maximum is 30 (default: 20).
-
-- `ldmMinMatch`=_lmml_, `lmml`=_lmml_:
-    Specify the minimum searched length of a match for long distance matching.
-
-    This option is ignored unless long distance matching is enabled.
-
-    Larger/very small values usually decrease compression ratio.
-
-    The minimum _lmml_ is 4 and the maximum is 4096 (default: 64).
-
-- `ldmBucketSizeLog`=_lblog_, `lblog`=_lblog_:
-    Specify the size of each bucket for the hash table used for long distance
-    matching.
-
-    This option is ignored unless long distance matching is enabled.
-
-    Larger bucket sizes improve collision resolution but decrease compression
-    speed.
-
-    The minimum _lblog_ is 1 and the maximum is 8 (default: 3).
-
-- `ldmHashRateLog`=_lhrlog_, `lhrlog`=_lhrlog_:
-    Specify the frequency of inserting entries into the long distance matching
-    hash table.
-
-    This option is ignored unless long distance matching is enabled.
-
-    Larger values will improve compression speed. Deviating far from the
-    default value will likely result in a decrease in compression ratio.
-
-    The default value is `wlog - lhlog`.
-
-### Example
-The following parameters sets advanced compression options to something
-similar to predefined level 19 for files bigger than 256 KB:
-
-`--zstd`=wlog=23,clog=23,hlog=22,slog=6,mml=3,tlen=48,strat=6
-
-### -B#:
-Specify the size of each compression job.
-This parameter is only available when multi-threading is enabled.
-Each compression job is run in parallel, so this value indirectly impacts the nb of active threads.
-Default job size varies depending on compression level (generally  `4 * windowSize`).
-`-B#` makes it possible to manually select a custom size.
-Note that job size must respect a minimum value which is enforced transparently.
-This minimum is either 512 KB, or `overlapSize`, whichever is largest.
-Different job sizes will lead to non-identical compressed frames.
-
-
-DICTIONARY BUILDER
-------------------
-`zstd` offers _dictionary_ compression,
-which greatly improves efficiency on small files and messages.
-It's possible to train `zstd` with a set of samples,
-the result of which is saved into a file called a `dictionary`.
-Then, during compression and decompression, reference the same dictionary,
-using command `-D dictionaryFileName`.
-Compression of small files similar to the sample set will be greatly improved.
-
-* `--train FILEs`:
-    Use FILEs as training set to create a dictionary.
-    The training set should ideally contain a lot of samples (> 100),
-    and weight typically 100x the target dictionary size
-    (for example, ~10 MB for a 100 KB dictionary).
-    `--train` can be combined with `-r` to indicate a directory rather than listing all the files,
-    which can be useful to circumvent shell expansion limits.
-
-    Since dictionary compression is mostly effective for small files,
-    the expectation is that the training set will only contain small files.
-    In the case where some samples happen to be large,
-    only the first 128 KiB of these samples will be used for training.
-
-    `--train` supports multithreading if `zstd` is compiled with threading support (default).
-    Additional advanced parameters can be specified with `--train-fastcover`.
-    The legacy dictionary builder can be accessed with `--train-legacy`.
-    The slower cover dictionary builder can be accessed with `--train-cover`.
-    Default `--train` is equivalent to `--train-fastcover=d=8,steps=4`.
-
-* `-o FILE`:
-    Dictionary saved into `FILE` (default name: dictionary).
-* `--maxdict=#`:
-    Limit dictionary to specified size (default: 112640 bytes).
-    As usual, quantities are expressed in bytes by default,
-    and it's possible to employ suffixes (like `KB` or `MB`)
-    to specify larger values.
-* `-#`:
-    Use `#` compression level during training (optional).
-    Will generate statistics more tuned for selected compression level,
-    resulting in a _small_ compression ratio improvement for this level.
-* `-B#`:
-    Split input files into blocks of size # (default: no split)
-* `-M#`, `--memory=#`:
-    Limit the amount of sample data loaded for training (default: 2 GB).
-    Note that the default (2 GB) is also the maximum.
-    This parameter can be useful in situations where the training set size
-    is not well controlled and could be potentially very large.
-    Since speed of the training process is directly correlated to
-    the size of the training sample set,
-    a smaller sample set leads to faster training.
-
-    In situations where the training set is larger than maximum memory,
-    the CLI will randomly select samples among the available ones,
-    up to the maximum allowed memory budget.
-    This is meant to improve dictionary relevance
-    by mitigating the potential impact of clustering,
-    such as selecting only files from the beginning of a list
-    sorted by modification date, or sorted by alphabetical order.
-    The randomization process is deterministic, so
-    training of the same list of files with the same parameters
-    will lead to the creation of the same dictionary.
-
-* `--dictID=#`:
-    A dictionary ID is a locally unique ID.
-    The decoder will use this value to verify it is using the right dictionary.
-    By default, zstd will create a 4-bytes random number ID.
-    It's possible to provide an explicit number ID instead.
-    It's up to the dictionary manager to not assign twice the same ID to
-    2 different dictionaries.
-    Note that short numbers have an advantage:
-    an ID < 256 will only need 1 byte in the compressed frame header,
-    and an ID < 65536 will only need 2 bytes.
-    This compares favorably to 4 bytes default.
-
-    Note that RFC8878 reserves IDs less than 32768 and greater than or equal to 2\^31, so they should not be used in public.
-
-* `--train-cover[=k#,d=#,steps=#,split=#,shrink[=#]]`:
-    Select parameters for the default dictionary builder algorithm named cover.
-    If _d_ is not specified, then it tries _d_ = 6 and _d_ = 8.
-    If _k_ is not specified, then it tries _steps_ values in the range [50, 2000].
-    If _steps_ is not specified, then the default value of 40 is used.
-    If _split_ is not specified or split <= 0, then the default value of 100 is used.
-    Requires that _d_ <= _k_.
-    If _shrink_ flag is not used, then the default value for _shrinkDict_ of 0 is used.
-    If _shrink_ is not specified, then the default value for _shrinkDictMaxRegression_ of 1 is used.
-
-    Selects segments of size _k_ with highest score to put in the dictionary.
-    The score of a segment is computed by the sum of the frequencies of all the
-    subsegments of size _d_.
-    Generally _d_ should be in the range [6, 8], occasionally up to 16, but the
-    algorithm will run faster with d <= _8_.
-    Good values for _k_ vary widely based on the input data, but a safe range is
-    [2 * _d_, 2000].
-    If _split_ is 100, all input samples are used for both training and testing
-    to find optimal _d_ and _k_ to build dictionary.
-    Supports multithreading if `zstd` is compiled with threading support.
-    Having _shrink_ enabled takes a truncated dictionary of minimum size and doubles
-    in size until compression ratio of the truncated dictionary is at most
-    _shrinkDictMaxRegression%_ worse than the compression ratio of the largest dictionary.
-
-    Examples:
-
-    `zstd --train-cover FILEs`
-
-    `zstd --train-cover=k=50,d=8 FILEs`
-
-    `zstd --train-cover=d=8,steps=500 FILEs`
-
-    `zstd --train-cover=k=50 FILEs`
-
-    `zstd --train-cover=k=50,split=60 FILEs`
-
-    `zstd --train-cover=shrink FILEs`
-
-    `zstd --train-cover=shrink=2 FILEs`
-
-* `--train-fastcover[=k#,d=#,f=#,steps=#,split=#,accel=#]`:
-    Same as cover but with extra parameters _f_ and _accel_ and different default value of split
-    If _split_ is not specified, then it tries _split_ = 75.
-    If _f_ is not specified, then it tries _f_ = 20.
-    Requires that 0 < _f_ < 32.
-    If _accel_ is not specified, then it tries _accel_ = 1.
-    Requires that 0 < _accel_ <= 10.
-    Requires that _d_ = 6 or _d_ = 8.
-
-    _f_ is log of size of array that keeps track of frequency of subsegments of size _d_.
-    The subsegment is hashed to an index in the range [0,2^_f_ - 1].
-    It is possible that 2 different subsegments are hashed to the same index, and they are considered as the same subsegment when computing frequency.
-    Using a higher _f_ reduces collision but takes longer.
-
-    Examples:
-
-    `zstd --train-fastcover FILEs`
-
-    `zstd --train-fastcover=d=8,f=15,accel=2 FILEs`
-
-* `--train-legacy[=selectivity=#]`:
-    Use legacy dictionary builder algorithm with the given dictionary
-    _selectivity_ (default: 9).
-    The smaller the _selectivity_ value, the denser the dictionary,
-    improving its efficiency but reducing its achievable maximum size.
-    `--train-legacy=s=#` is also accepted.
-
-    Examples:
-
-    `zstd --train-legacy FILEs`
-
-    `zstd --train-legacy=selectivity=8 FILEs`
-
-
-BENCHMARK
----------
-The `zstd` CLI provides a benchmarking mode that can be used to easily find suitable compression parameters, or alternatively to benchmark a computer's performance.
-Note that the results are highly dependent on the content being compressed.
-
-* `-b#`:
-    benchmark file(s) using compression level #
-* `-e#`:
-    benchmark file(s) using multiple compression levels, from `-b#` to `-e#` (inclusive)
-* `-d`:
-    benchmark decompression speed only (requires providing an already zstd-compressed content)
-* `-i#`:
-    minimum evaluation time, in seconds (default: 3s), benchmark mode only
-* `-B#`, `--block-size=#`:
-    cut file(s) into independent chunks of size # (default: no chunking)
-* `--priority=rt`:
-    set process priority to real-time (Windows)
-
-**Output Format:** CompressionLevel#Filename: InputSize -> OutputSize (CompressionRatio), CompressionSpeed, DecompressionSpeed
-
-**Methodology:** For both compression and decompression speed, the entire input is compressed/decompressed in-memory to measure speed. A run lasts at least 1 sec, so when files are small, they are compressed/decompressed several times per run, in order to improve measurement accuracy.
-
-
-SEE ALSO
---------
-`zstdgrep`(1), `zstdless`(1), `gzip`(1), `xz`(1)
-
-The <zstandard> format is specified in Y. Collet, "Zstandard Compression and the 'application/zstd' Media Type", https://www.ietf.org/rfc/rfc8878.txt, Internet RFC 8878 (February 2021).
-
-BUGS
-----
-Report bugs at: https://github.com/facebook/zstd/issues
-
-AUTHOR
-------
-Yann Collet