dsh-vibe-math 2.8.4 → 2.8.5

package/prompt-corpus-v4/formal-verify-v4.md

@@ -41,18 +41,18 @@ New items:
 
 
 - math_computation {op: probe|run|receipt|install, engine, mode: code|file|expr, …} — 先 probe 预检引擎/包/许可，再调引擎计算并把脚本与输出归档成可复核回执；缺引擎/缺包只报告与给安装指引/计划；shell 兜底不算归档。
-- math_computation：本机可用 （无）。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
+- math_computation：可用引擎 无。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
 - shell 兜底标注：工具不可用而改用宿主 shell 时，结论必须写"未经工具归档（shell 路径）"，且不得与工具回执混同（shell 无回执、无超时/输出上限保证）。
-- 归档→编辑→重跑：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true` 与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
+- 归档→编辑→重跑（**回执＝一次 math_computation 调用的 JSON 结果**：先 probe 或 run 一次，它有哪些字段就一目了然）：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true`（脚本内容相对上一份回执变过）与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
 - 需要精确数值、符号化简、反例搜索、统计或线性代数时调用 math_computation：先 probe，再 run。
 - 复核他人的数值结论时用 op:'receipt'（或 op:'run', mode:'file' 指向同一脚本）重跑，并把回执路径写进报告。
 - 归档即引用：报告里带 Computation/<id>/receipt.json；这是"支撑材料"的用法。
 - 判断标准：① 有价值或可能复用；② 较为关键或必要；③ 你对该陈述有把握（置信度高）——没把握的先别入库。
 - 不得把计算结果当成"已证明"：对象是否已验证仍只由本预设既有的验证/共识路径给出。
 - 替代必须声明（诚实性）：当替代方案改变了**精确性或结论强度**时（精确符号解 → 数值近似、闭式解 → 采样/求积、改了精度/容差/假设、换了算法类），结论里**必须写明**，不得读起来像得到了原本（精确/所要求的）结果；拿不到精确结果就直说。
-- math_computation: available (none). Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
+- math_computation: available engines none. Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
 - Shell fallback: if the tool cannot run you may use the host shell, but mark the conclusion "not tool-archived (shell path)" - shell runs have no receipt and no timeout/output guarantees; only tool-routed computations count as reproducible supporting material.
-- Archive -> edit -> re-run: for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
+- Archive -> edit -> re-run (a RECEIPT is the JSON result of ONE math_computation call - run `probe` or `run` once and the fields below are right there in front of you): for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` (the script content differs from the previous receipt) and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
 - Call math_computation for exact numerics, symbolic simplification, counter-example search, statistics or linear algebra: probe first, then run.
 - To re-check someone else's numeric conclusion, re-run the same script (op:'receipt' or op:'run', mode:'file') and cite the receipt path.
 - Archive means cite: put Computation/<id>/receipt.json in your report - that is what "supporting material" means.
@@ -118,18 +118,18 @@ New items:
     【形式化结果】行看结果。**在作业落地为"通过"之前，不得把该对象当成已通过。**这会让后续的验证与证明省掉大量重复工作。归档前先跑通（vibe_v4_lean_run 或 run=true）；跑不通的定义不要进可复用库。
 
 - math_computation {op: probe|run|receipt|install, engine, mode: code|file|expr, …} — 先 probe 预检引擎/包/许可，再调引擎计算并把脚本与输出归档成可复核回执；缺引擎/缺包只报告与给安装指引/计划；shell 兜底不算归档。
-- math_computation：本机可用 （无）。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
+- math_computation：可用引擎 无。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
 - shell 兜底标注：工具不可用而改用宿主 shell 时，结论必须写"未经工具归档（shell 路径）"，且不得与工具回执混同（shell 无回执、无超时/输出上限保证）。
-- 归档→编辑→重跑：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true` 与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
+- 归档→编辑→重跑（**回执＝一次 math_computation 调用的 JSON 结果**：先 probe 或 run 一次，它有哪些字段就一目了然）：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true`（脚本内容相对上一份回执变过）与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
 - 需要精确数值、符号化简、反例搜索、统计或线性代数时调用 math_computation：先 probe，再 run。
 - 复核他人的数值结论时用 op:'receipt'（或 op:'run', mode:'file' 指向同一脚本）重跑，并把回执路径写进报告。
 - 归档即引用：报告里带 Computation/<id>/receipt.json；这是"支撑材料"的用法。
 - 判断标准：① 有价值或可能复用；② 较为关键或必要；③ 你对该陈述有把握（置信度高）——没把握的先别入库。
 - 不得把计算结果当成"已证明"：对象是否已验证仍只由本预设既有的验证/共识路径给出。
 - 替代必须声明（诚实性）：当替代方案改变了**精确性或结论强度**时（精确符号解 → 数值近似、闭式解 → 采样/求积、改了精度/容差/假设、换了算法类），结论里**必须写明**，不得读起来像得到了原本（精确/所要求的）结果；拿不到精确结果就直说。
-- math_computation: available (none). Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
+- math_computation: available engines none. Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
 - Shell fallback: if the tool cannot run you may use the host shell, but mark the conclusion "not tool-archived (shell path)" - shell runs have no receipt and no timeout/output guarantees; only tool-routed computations count as reproducible supporting material.
-- Archive -> edit -> re-run: for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
+- Archive -> edit -> re-run (a RECEIPT is the JSON result of ONE math_computation call - run `probe` or `run` once and the fields below are right there in front of you): for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` (the script content differs from the previous receipt) and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
 - Call math_computation for exact numerics, symbolic simplification, counter-example search, statistics or linear algebra: probe first, then run.
 - To re-check someone else's numeric conclusion, re-run the same script (op:'receipt' or op:'run', mode:'file') and cite the receipt path.
 - Archive means cite: put Computation/<id>/receipt.json in your report - that is what "supporting material" means.
@@ -153,18 +153,18 @@ Resident researcher r-1 — CHECKPOINT（团队空闲，请由你们继续自主
   · 编译默认走后台队列（leanAsync=true）：入队后你可以继续工作；用 vibe_v4_lean_lib 的 jobs 字段或下一轮提示里的
     【形式化结果】行看结果。**在作业落地为"通过"之前，不得把该对象当成已通过。**这会让后续的验证与证明省掉大量重复工作。归档前先跑通（vibe_v4_lean_run 或 run=true）；跑不通的定义不要进可复用库。
 - math_computation {op: probe|run|receipt|install, engine, mode: code|file|expr, …} — 先 probe 预检引擎/包/许可，再调引擎计算并把脚本与输出归档成可复核回执；缺引擎/缺包只报告与给安装指引/计划；shell 兜底不算归档。
-- math_computation：本机可用 （无）。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
+- math_computation：可用引擎 无。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
 - shell 兜底标注：工具不可用而改用宿主 shell 时，结论必须写"未经工具归档（shell 路径）"，且不得与工具回执混同（shell 无回执、无超时/输出上限保证）。
-- 归档→编辑→重跑：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true` 与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
+- 归档→编辑→重跑（**回执＝一次 math_computation 调用的 JSON 结果**：先 probe 或 run 一次，它有哪些字段就一目了然）：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true`（脚本内容相对上一份回执变过）与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
 - 需要精确数值、符号化简、反例搜索、统计或线性代数时调用 math_computation：先 probe，再 run。
 - 复核他人的数值结论时用 op:'receipt'（或 op:'run', mode:'file' 指向同一脚本）重跑，并把回执路径写进报告。
 - 归档即引用：报告里带 Computation/<id>/receipt.json；这是"支撑材料"的用法。
 - 判断标准：① 有价值或可能复用；② 较为关键或必要；③ 你对该陈述有把握（置信度高）——没把握的先别入库。
 - 不得把计算结果当成"已证明"：对象是否已验证仍只由本预设既有的验证/共识路径给出。
 - 替代必须声明（诚实性）：当替代方案改变了**精确性或结论强度**时（精确符号解 → 数值近似、闭式解 → 采样/求积、改了精度/容差/假设、换了算法类），结论里**必须写明**，不得读起来像得到了原本（精确/所要求的）结果；拿不到精确结果就直说。
-- math_computation: available (none). Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
+- math_computation: available engines none. Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
 - Shell fallback: if the tool cannot run you may use the host shell, but mark the conclusion "not tool-archived (shell path)" - shell runs have no receipt and no timeout/output guarantees; only tool-routed computations count as reproducible supporting material.
-- Archive -> edit -> re-run: for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
+- Archive -> edit -> re-run (a RECEIPT is the JSON result of ONE math_computation call - run `probe` or `run` once and the fields below are right there in front of you): for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` (the script content differs from the previous receipt) and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
 - Call math_computation for exact numerics, symbolic simplification, counter-example search, statistics or linear algebra: probe first, then run.
 - To re-check someone else's numeric conclusion, re-run the same script (op:'receipt' or op:'run', mode:'file') and cite the receipt path.
 - Archive means cite: put Computation/<id>/receipt.json in your report - that is what "supporting material" means.
@@ -189,18 +189,18 @@ Reply with ONLY a JSON object:
   · 编译默认走后台队列（leanAsync=true）：入队后你可以继续工作；用 vibe_v4_lean_lib 的 jobs 字段或下一轮提示里的
     【形式化结果】行看结果。**在作业落地为"通过"之前，不得把该对象当成已通过。**这会让后续的验证与证明省掉大量重复工作。归档前先跑通（vibe_v4_lean_run 或 run=true）；跑不通的定义不要进可复用库。
 - math_computation {op: probe|run|receipt|install, engine, mode: code|file|expr, …} — 先 probe 预检引擎/包/许可，再调引擎计算并把脚本与输出归档成可复核回执；缺引擎/缺包只报告与给安装指引/计划；shell 兜底不算归档。
-- math_computation：本机可用 （无）。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
+- math_computation：可用引擎 无。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
 - shell 兜底标注：工具不可用而改用宿主 shell 时，结论必须写"未经工具归档（shell 路径）"，且不得与工具回执混同（shell 无回执、无超时/输出上限保证）。
-- 归档→编辑→重跑：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true` 与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
+- 归档→编辑→重跑（**回执＝一次 math_computation 调用的 JSON 结果**：先 probe 或 run 一次，它有哪些字段就一目了然）：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true`（脚本内容相对上一份回执变过）与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
 - 需要精确数值、符号化简、反例搜索、统计或线性代数时调用 math_computation：先 probe，再 run。
 - 复核他人的数值结论时用 op:'receipt'（或 op:'run', mode:'file' 指向同一脚本）重跑，并把回执路径写进报告。
 - 归档即引用：报告里带 Computation/<id>/receipt.json；这是"支撑材料"的用法。
 - 判断标准：① 有价值或可能复用；② 较为关键或必要；③ 你对该陈述有把握（置信度高）——没把握的先别入库。
 - 不得把计算结果当成"已证明"：对象是否已验证仍只由本预设既有的验证/共识路径给出。
 - 替代必须声明（诚实性）：当替代方案改变了**精确性或结论强度**时（精确符号解 → 数值近似、闭式解 → 采样/求积、改了精度/容差/假设、换了算法类），结论里**必须写明**，不得读起来像得到了原本（精确/所要求的）结果；拿不到精确结果就直说。
-- math_computation: available (none). Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
+- math_computation: available engines none. Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
 - Shell fallback: if the tool cannot run you may use the host shell, but mark the conclusion "not tool-archived (shell path)" - shell runs have no receipt and no timeout/output guarantees; only tool-routed computations count as reproducible supporting material.
-- Archive -> edit -> re-run: for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
+- Archive -> edit -> re-run (a RECEIPT is the JSON result of ONE math_computation call - run `probe` or `run` once and the fields below are right there in front of you): for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` (the script content differs from the previous receipt) and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
 - Call math_computation for exact numerics, symbolic simplification, counter-example search, statistics or linear algebra: probe first, then run.
 - To re-check someone else's numeric conclusion, re-run the same script (op:'receipt' or op:'run', mode:'file') and cite the receipt path.
 - Archive means cite: put Computation/<id>/receipt.json in your report - that is what "supporting material" means.
@@ -297,18 +297,18 @@ New items:
     【形式化结果】行看结果。**在作业落地为"通过"之前，不得把该对象当成已通过。**本模式下，任何要定论为真/假的对象都必须先有 Lean 通过或显式阻塞记录。归档前先跑通（vibe_v4_lean_run 或 run=true）；跑不通的定义不要进可复用库。
 
 - math_computation {op: probe|run|receipt|install, engine, mode: code|file|expr, …} — 先 probe 预检引擎/包/许可，再调引擎计算并把脚本与输出归档成可复核回执；缺引擎/缺包只报告与给安装指引/计划；shell 兜底不算归档。
-- math_computation：本机可用 （无）。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
+- math_computation：可用引擎 无。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
 - shell 兜底标注：工具不可用而改用宿主 shell 时，结论必须写"未经工具归档（shell 路径）"，且不得与工具回执混同（shell 无回执、无超时/输出上限保证）。
-- 归档→编辑→重跑：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true` 与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
+- 归档→编辑→重跑（**回执＝一次 math_computation 调用的 JSON 结果**：先 probe 或 run 一次，它有哪些字段就一目了然）：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true`（脚本内容相对上一份回执变过）与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
 - 需要精确数值、符号化简、反例搜索、统计或线性代数时调用 math_computation：先 probe，再 run。
 - 复核他人的数值结论时用 op:'receipt'（或 op:'run', mode:'file' 指向同一脚本）重跑，并把回执路径写进报告。
 - 归档即引用：报告里带 Computation/<id>/receipt.json；这是"支撑材料"的用法。
 - 判断标准：① 有价值或可能复用；② 较为关键或必要；③ 你对该陈述有把握（置信度高）——没把握的先别入库。
 - 不得把计算结果当成"已证明"：对象是否已验证仍只由本预设既有的验证/共识路径给出。
 - 替代必须声明（诚实性）：当替代方案改变了**精确性或结论强度**时（精确符号解 → 数值近似、闭式解 → 采样/求积、改了精度/容差/假设、换了算法类），结论里**必须写明**，不得读起来像得到了原本（精确/所要求的）结果；拿不到精确结果就直说。
-- math_computation: available (none). Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
+- math_computation: available engines none. Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
 - Shell fallback: if the tool cannot run you may use the host shell, but mark the conclusion "not tool-archived (shell path)" - shell runs have no receipt and no timeout/output guarantees; only tool-routed computations count as reproducible supporting material.
-- Archive -> edit -> re-run: for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
+- Archive -> edit -> re-run (a RECEIPT is the JSON result of ONE math_computation call - run `probe` or `run` once and the fields below are right there in front of you): for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` (the script content differs from the previous receipt) and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
 - Call math_computation for exact numerics, symbolic simplification, counter-example search, statistics or linear algebra: probe first, then run.
 - To re-check someone else's numeric conclusion, re-run the same script (op:'receipt' or op:'run', mode:'file') and cite the receipt path.
 - Archive means cite: put Computation/<id>/receipt.json in your report - that is what "supporting material" means.
@@ -442,18 +442,18 @@ New items:
     【形式化结果】行看结果。**在作业落地为"通过"之前，不得把该对象当成已通过。**本模式下，任何要定论为真/假的对象都必须先有 Lean 通过或显式阻塞记录。归档前先跑通（vibe_v4_lean_run 或 run=true）；跑不通的定义不要进可复用库。
 
 - math_computation {op: probe|run|receipt|install, engine, mode: code|file|expr, …} — 先 probe 预检引擎/包/许可，再调引擎计算并把脚本与输出归档成可复核回执；缺引擎/缺包只报告与给安装指引/计划；shell 兜底不算归档。
-- math_computation：本机可用 （无）。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
+- math_computation：可用引擎 无。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
 - shell 兜底标注：工具不可用而改用宿主 shell 时，结论必须写"未经工具归档（shell 路径）"，且不得与工具回执混同（shell 无回执、无超时/输出上限保证）。
-- 归档→编辑→重跑：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true` 与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
+- 归档→编辑→重跑（**回执＝一次 math_computation 调用的 JSON 结果**：先 probe 或 run 一次，它有哪些字段就一目了然）：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true`（脚本内容相对上一份回执变过）与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
 - 需要精确数值、符号化简、反例搜索、统计或线性代数时调用 math_computation：先 probe，再 run。
 - 复核他人的数值结论时用 op:'receipt'（或 op:'run', mode:'file' 指向同一脚本）重跑，并把回执路径写进报告。
 - 归档即引用：报告里带 Computation/<id>/receipt.json；这是"支撑材料"的用法。
 - 判断标准：① 有价值或可能复用；② 较为关键或必要；③ 你对该陈述有把握（置信度高）——没把握的先别入库。
 - 不得把计算结果当成"已证明"：对象是否已验证仍只由本预设既有的验证/共识路径给出。
 - 替代必须声明（诚实性）：当替代方案改变了**精确性或结论强度**时（精确符号解 → 数值近似、闭式解 → 采样/求积、改了精度/容差/假设、换了算法类），结论里**必须写明**，不得读起来像得到了原本（精确/所要求的）结果；拿不到精确结果就直说。
-- math_computation: available (none). Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
+- math_computation: available engines none. Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
 - Shell fallback: if the tool cannot run you may use the host shell, but mark the conclusion "not tool-archived (shell path)" - shell runs have no receipt and no timeout/output guarantees; only tool-routed computations count as reproducible supporting material.
-- Archive -> edit -> re-run: for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
+- Archive -> edit -> re-run (a RECEIPT is the JSON result of ONE math_computation call - run `probe` or `run` once and the fields below are right there in front of you): for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` (the script content differs from the previous receipt) and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
 - Call math_computation for exact numerics, symbolic simplification, counter-example search, statistics or linear algebra: probe first, then run.
 - To re-check someone else's numeric conclusion, re-run the same script (op:'receipt' or op:'run', mode:'file') and cite the receipt path.
 - Archive means cite: put Computation/<id>/receipt.json in your report - that is what "supporting material" means.
@@ -528,18 +528,18 @@ New items:
     【形式化结果】行看结果。**在作业落地为"通过"之前，不得把该对象当成已通过。**本模式下，任何要定论为真/假的对象都必须先有 Lean 通过或显式阻塞记录。归档前先跑通（vibe_v4_lean_run 或 run=true）；跑不通的定义不要进可复用库。
 
 - math_computation {op: probe|run|receipt|install, engine, mode: code|file|expr, …} — 先 probe 预检引擎/包/许可，再调引擎计算并把脚本与输出归档成可复核回执；缺引擎/缺包只报告与给安装指引/计划；shell 兜底不算归档。
-- math_computation：本机可用 （无）。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
+- math_computation：可用引擎 无。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
 - shell 兜底标注：工具不可用而改用宿主 shell 时，结论必须写"未经工具归档（shell 路径）"，且不得与工具回执混同（shell 无回执、无超时/输出上限保证）。
-- 归档→编辑→重跑：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true` 与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
+- 归档→编辑→重跑（**回执＝一次 math_computation 调用的 JSON 结果**：先 probe 或 run 一次，它有哪些字段就一目了然）：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true`（脚本内容相对上一份回执变过）与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
 - 需要精确数值、符号化简、反例搜索、统计或线性代数时调用 math_computation：先 probe，再 run。
 - 复核他人的数值结论时用 op:'receipt'（或 op:'run', mode:'file' 指向同一脚本）重跑，并把回执路径写进报告。
 - 归档即引用：报告里带 Computation/<id>/receipt.json；这是"支撑材料"的用法。
 - 判断标准：① 有价值或可能复用；② 较为关键或必要；③ 你对该陈述有把握（置信度高）——没把握的先别入库。
 - 不得把计算结果当成"已证明"：对象是否已验证仍只由本预设既有的验证/共识路径给出。
 - 替代必须声明（诚实性）：当替代方案改变了**精确性或结论强度**时（精确符号解 → 数值近似、闭式解 → 采样/求积、改了精度/容差/假设、换了算法类），结论里**必须写明**，不得读起来像得到了原本（精确/所要求的）结果；拿不到精确结果就直说。
-- math_computation: available (none). Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
+- math_computation: available engines none. Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
 - Shell fallback: if the tool cannot run you may use the host shell, but mark the conclusion "not tool-archived (shell path)" - shell runs have no receipt and no timeout/output guarantees; only tool-routed computations count as reproducible supporting material.
-- Archive -> edit -> re-run: for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
+- Archive -> edit -> re-run (a RECEIPT is the JSON result of ONE math_computation call - run `probe` or `run` once and the fields below are right there in front of you): for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` (the script content differs from the previous receipt) and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
 - Call math_computation for exact numerics, symbolic simplification, counter-example search, statistics or linear algebra: probe first, then run.
 - To re-check someone else's numeric conclusion, re-run the same script (op:'receipt' or op:'run', mode:'file') and cite the receipt path.
 - Archive means cite: put Computation/<id>/receipt.json in your report - that is what "supporting material" means.
@@ -563,18 +563,18 @@ New items:
 
 
 - math_computation {op: probe|run|receipt|install, engine, mode: code|file|expr, …} — 先 probe 预检引擎/包/许可，再调引擎计算并把脚本与输出归档成可复核回执；缺引擎/缺包只报告与给安装指引/计划；shell 兜底不算归档。
-- math_computation：本机可用 （无）。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
+- math_computation：可用引擎 无。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
 - shell 兜底标注：工具不可用而改用宿主 shell 时，结论必须写"未经工具归档（shell 路径）"，且不得与工具回执混同（shell 无回执、无超时/输出上限保证）。
-- 归档→编辑→重跑：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true` 与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
+- 归档→编辑→重跑（**回执＝一次 math_computation 调用的 JSON 结果**：先 probe 或 run 一次，它有哪些字段就一目了然）：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true`（脚本内容相对上一份回执变过）与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
 - 需要精确数值、符号化简、反例搜索、统计或线性代数时调用 math_computation：先 probe，再 run。
 - 复核他人的数值结论时用 op:'receipt'（或 op:'run', mode:'file' 指向同一脚本）重跑，并把回执路径写进报告。
 - 归档即引用：报告里带 Computation/<id>/receipt.json；这是"支撑材料"的用法。
 - 判断标准：① 有价值或可能复用；② 较为关键或必要；③ 你对该陈述有把握（置信度高）——没把握的先别入库。
 - 不得把计算结果当成"已证明"：对象是否已验证仍只由本预设既有的验证/共识路径给出。
 - 替代必须声明（诚实性）：当替代方案改变了**精确性或结论强度**时（精确符号解 → 数值近似、闭式解 → 采样/求积、改了精度/容差/假设、换了算法类），结论里**必须写明**，不得读起来像得到了原本（精确/所要求的）结果；拿不到精确结果就直说。
-- math_computation: available (none). Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
+- math_computation: available engines none. Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
 - Shell fallback: if the tool cannot run you may use the host shell, but mark the conclusion "not tool-archived (shell path)" - shell runs have no receipt and no timeout/output guarantees; only tool-routed computations count as reproducible supporting material.
-- Archive -> edit -> re-run: for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
+- Archive -> edit -> re-run (a RECEIPT is the JSON result of ONE math_computation call - run `probe` or `run` once and the fields below are right there in front of you): for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` (the script content differs from the previous receipt) and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
 - Call math_computation for exact numerics, symbolic simplification, counter-example search, statistics or linear algebra: probe first, then run.
 - To re-check someone else's numeric conclusion, re-run the same script (op:'receipt' or op:'run', mode:'file') and cite the receipt path.
 - Archive means cite: put Computation/<id>/receipt.json in your report - that is what "supporting material" means.
@@ -601,18 +601,18 @@ New items:
 
 
 - math_computation {op: probe|run|receipt|install, engine, mode: code|file|expr, …} — 先 probe 预检引擎/包/许可，再调引擎计算并把脚本与输出归档成可复核回执；缺引擎/缺包只报告与给安装指引/计划；shell 兜底不算归档。
-- math_computation：本机可用 （无）。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
+- math_computation：可用引擎 无。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
 - shell 兜底标注：工具不可用而改用宿主 shell 时，结论必须写"未经工具归档（shell 路径）"，且不得与工具回执混同（shell 无回执、无超时/输出上限保证）。
-- 归档→编辑→重跑：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true` 与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
+- 归档→编辑→重跑（**回执＝一次 math_computation 调用的 JSON 结果**：先 probe 或 run 一次，它有哪些字段就一目了然）：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true`（脚本内容相对上一份回执变过）与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
 - 需要精确数值、符号化简、反例搜索、统计或线性代数时调用 math_computation：先 probe，再 run。
 - 复核他人的数值结论时用 op:'receipt'（或 op:'run', mode:'file' 指向同一脚本）重跑，并把回执路径写进报告。
 - 归档即引用：报告里带 Computation/<id>/receipt.json；这是"支撑材料"的用法。
 - 判断标准：① 有价值或可能复用；② 较为关键或必要；③ 你对该陈述有把握（置信度高）——没把握的先别入库。
 - 不得把计算结果当成"已证明"：对象是否已验证仍只由本预设既有的验证/共识路径给出。
 - 替代必须声明（诚实性）：当替代方案改变了**精确性或结论强度**时（精确符号解 → 数值近似、闭式解 → 采样/求积、改了精度/容差/假设、换了算法类），结论里**必须写明**，不得读起来像得到了原本（精确/所要求的）结果；拿不到精确结果就直说。
-- math_computation: available (none). Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
+- math_computation: available engines none. Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
 - Shell fallback: if the tool cannot run you may use the host shell, but mark the conclusion "not tool-archived (shell path)" - shell runs have no receipt and no timeout/output guarantees; only tool-routed computations count as reproducible supporting material.
-- Archive -> edit -> re-run: for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
+- Archive -> edit -> re-run (a RECEIPT is the JSON result of ONE math_computation call - run `probe` or `run` once and the fields below are right there in front of you): for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` (the script content differs from the previous receipt) and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
 - Call math_computation for exact numerics, symbolic simplification, counter-example search, statistics or linear algebra: probe first, then run.
 - To re-check someone else's numeric conclusion, re-run the same script (op:'receipt' or op:'run', mode:'file') and cite the receipt path.
 - Archive means cite: put Computation/<id>/receipt.json in your report - that is what "supporting material" means.
@@ -648,18 +648,18 @@ New items:
     【形式化结果】行看结果。**在作业落地为"通过"之前，不得把该对象当成已通过。**本模式下，任何要定论为真/假的对象都必须先有 Lean 通过或显式阻塞记录。归档前先跑通（vibe_v4_lean_run 或 run=true）；跑不通的定义不要进可复用库。
 
 - math_computation {op: probe|run|receipt|install, engine, mode: code|file|expr, …} — 先 probe 预检引擎/包/许可，再调引擎计算并把脚本与输出归档成可复核回执；缺引擎/缺包只报告与给安装指引/计划；shell 兜底不算归档。
-- math_computation：本机可用 （无）。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
+- math_computation：可用引擎 无。需要数值/符号/统计计算时先 probe 再 run（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。
 - shell 兜底标注：工具不可用而改用宿主 shell 时，结论必须写"未经工具归档（shell 路径）"，且不得与工具回执混同（shell 无回执、无超时/输出上限保证）。
-- 归档→编辑→重跑：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true` 与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
+- 归档→编辑→重跑（**回执＝一次 math_computation 调用的 JSON 结果**：先 probe 或 run 一次，它有哪些字段就一目了然）：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true`（脚本内容相对上一份回执变过）与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
 - 需要精确数值、符号化简、反例搜索、统计或线性代数时调用 math_computation：先 probe，再 run。
 - 复核他人的数值结论时用 op:'receipt'（或 op:'run', mode:'file' 指向同一脚本）重跑，并把回执路径写进报告。
 - 归档即引用：报告里带 Computation/<id>/receipt.json；这是"支撑材料"的用法。
 - 判断标准：① 有价值或可能复用；② 较为关键或必要；③ 你对该陈述有把握（置信度高）——没把握的先别入库。
 - 不得把计算结果当成"已证明"：对象是否已验证仍只由本预设既有的验证/共识路径给出。
 - 替代必须声明（诚实性）：当替代方案改变了**精确性或结论强度**时（精确符号解 → 数值近似、闭式解 → 采样/求积、改了精度/容差/假设、换了算法类），结论里**必须写明**，不得读起来像得到了原本（精确/所要求的）结果；拿不到精确结果就直说。
-- math_computation: available (none). Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
+- math_computation: available engines none. Probe first, then run (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan; installing requires a plan plus confirmation.
 - Shell fallback: if the tool cannot run you may use the host shell, but mark the conclusion "not tool-archived (shell path)" - shell runs have no receipt and no timeout/output guarantees; only tool-routed computations count as reproducible supporting material.
-- Archive -> edit -> re-run: for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
+- Archive -> edit -> re-run (a RECEIPT is the JSON result of ONE math_computation call - run `probe` or `run` once and the fields below are right there in front of you): for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` (the script content differs from the previous receipt) and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
 - Call math_computation for exact numerics, symbolic simplification, counter-example search, statistics or linear algebra: probe first, then run.
 - To re-check someone else's numeric conclusion, re-run the same script (op:'receipt' or op:'run', mode:'file') and cite the receipt path.
 - Archive means cite: put Computation/<id>/receipt.json in your report - that is what "supporting material" means.