dsh-vibe-math 2.8.4 → 2.8.5

package/vibe-math-v4/math-computation.js

@@ -87,13 +87,13 @@ export const MATH_PERSONA_TOOL_LINE = '- math_computation {op: probe|run|receipt
 // P2a: the archive -> edit -> re-run workflow. Injected into every preset's rule block (and appended
 // to both persona blocks) so an agent cannot miss that (a) the script is archived, (b) it may edit
 // it, and (c) re-running is what produces evidence for the edited code.
-export const MATH_ARCHIVE_WORKFLOW_LINE = '- 归档→编辑→重跑：mode:\'code\' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；'
+export const MATH_ARCHIVE_WORKFLOW_LINE = '- 归档→编辑→重跑（**回执＝一次 math_computation 调用的 JSON 结果**：先 probe 或 run 一次，它有哪些字段就一目了然）：mode:\'code\' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；'
   + '**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。'
-  + '要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:\'file\' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true` 与 `previousReceipt`（指向上一次）。'
+  + '要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:\'file\' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true`（脚本内容相对上一份回执变过）与 `previousReceipt`（指向上一次）。'
   + '**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。'
   + '**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。'
 
-export const MATH_ARCHIVE_WORKFLOW_LINE_EN = '- Archive -> edit -> re-run: for mode:\'code\' the script original is at the receipt\'s scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:\'file\' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` and `previousReceipt` pointing at the previous attempt. Pointing mode:\'file\' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.'
+export const MATH_ARCHIVE_WORKFLOW_LINE_EN = '- Archive -> edit -> re-run (a RECEIPT is the JSON result of ONE math_computation call - run `probe` or `run` once and the fields below are right there in front of you): for mode:\'code\' the script original is at the receipt\'s scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:\'file\' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` (the script content differs from the previous receipt) and `previousReceipt` pointing at the previous attempt. Pointing mode:\'file\' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.'
 
 // Round-6 (A): honesty about SUBSTITUTIONS. An alternative that weakens exactness or conclusion
 // strength must be declared, and the conclusion must never read as if the requested (exact) result
@@ -1468,13 +1468,13 @@ export function mathAvailabilityLine(probe, lang, mathMode) {
   const mode = mathMode || MATH_PARAM_DEFAULTS.mathMode
   const list = (probe && probe.engines ? probe.engines : []).map((e) => e.name + ' ' + (e.version || '?')).join('、')
   if (lang === 'en') {
-    const head = '- math_computation: available ' + (list || '(none)') + '. Probe first, then run'
+    const head = '- math_computation: available engines ' + (list || 'none') + '. Probe first, then run'
       + ' (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan;'
       + ' installing requires a plan plus confirmation.'
     const shell = mode === 'typed+shell' ? '\n' + MATH_SHELL_RULE_LINE_EN : ''
     return head + shell + '\n' + MATH_ARCHIVE_WORKFLOW_LINE_EN + '\n' + MATH_RULE_LINES_EN.join('\n')
   }
-  const head = '- math_computation：本机可用 ' + (list || '（无）') + '。需要数值/符号/统计计算时先 probe 再 run'
+  const head = '- math_computation：可用引擎 ' + (list || '无') + '。需要数值/符号/统计计算时先 probe 再 run'
     + '（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。'
   const shell = mode === 'typed+shell' ? '\n' + MATH_SHELL_RULE_LINE : ''
   return head + shell + '\n' + MATH_ARCHIVE_WORKFLOW_LINE + '\n' + MATH_RULE_LINES.join('\n')

package/vibe-math-v4/vibe-math-v4.js

@@ -46,6 +46,17 @@ import {
 // guessed; otherwise the host resolver (PATH) is tried first, then the known install locations for this
 // platform. Provenance is returned so the caller can report \`leanFoundVia: 'explicit'|'path'|'known-install'\`,
 // and the probed list travels on failure ("I looked here too"), never just "not found on PATH".
+// ── task-28: TeX Live's DOCUMENTED typical install positions + a bounded probe budget ────────────────
+// A real-host SLV v5 run (15.2 min, candidate PASS) archived compileStatus `not-detected` on a machine
+// whose TeX Live lives at `D:\texlive\2025\bin\windows\xelatex.exe`: the known list only covered
+// `<ProgramFiles>/texlive`, so an engine that IS installed but NOT on PATH was never found and the run
+// degraded to tex+md only. These are DOCUMENTED roots, never a search: no whole-drive scan, no install,
+// no write outside the workspace (the three hard boundaries stay in the guidance text).
+const TEX_CANDIDATE_CAP = 40            // hard cap on TeX known-root candidate paths probed per detection
+const TEX_YEAR_LOOKBACK = 4             // the newest N year dirs of a TeX Live root (current year + 3)
+const TEX_DRIVE_YEAR_ROOTS = ['D:/texlive', 'C:/texlive']               // Windows: TeX Live at a DRIVE ROOT
+const TEX_SYSTEM_BIN_ROOTS = ['/Library/TeX/texbin']                    // macOS: system MacTeX (already a bin dir)
+const TEX_SYSTEM_YEAR_ROOTS = ['/usr/local/texlive', '/opt/texlive']    // Unix: TeX Live (year-globbed)
 async function resolveKnownTool(sub, opts) {
   const name = String((opts && opts.name) || '')
   const explicit = String((opts && opts.explicit) || '').trim()
@@ -65,12 +76,27 @@ async function resolveKnownTool(sub, opts) {
     return null
   }
   const listDirs = async (p) => { try { const fs = await import('node:fs'); return fs.readdirSync(p, { withFileTypes: true }).filter((e) => e.isDirectory()).map((e) => e.name) } catch (err) { return [] } }
+  // task-29: TEST/DIAGNOSTIC sandbox seam (env-gated; UNSET = identity, i.e. exactly today's behaviour).
+  // When `V4_TEX_ROOTS_SANDBOX` is set, every known-install TeX candidate is REBASED under that directory
+  // (same relative tail) so a suite can pin its "no LaTeX installed here" premise on ANY host: the
+  // candidates are still probed ONE BY ONE (triedPaths stays named, TEX_CANDIDATE_CAP still bounds them,
+  // still no whole-drive scan) but a real install is never touched. It is not a product switch: it only
+  // relocates where the documented roots are looked for, and it is never set by the plugin itself.
+  const texSandbox = kind === 'tex' ? String(env.V4_TEX_ROOTS_SANDBOX || '').trim() : ''
+  const texProbeBase = (p) => {
+    if (!texSandbox) return p
+    const tail = String(p).replace(/\\/g, '/').replace(/^[A-Za-z]:/, '').replace(/^\/+/, '')
+    return texSandbox.replace(/\\/g, '/').replace(/\/+$/, '') + '/' + tail
+  }
   const knownLean = win
     ? [elan ? elan + '/bin' : null, home + '/.elan/bin', local ? local + '/Programs/lean' : null, pf + '/lean/bin']
     : [elan ? elan + '/bin' : null, home + '/.elan/bin', home + '/.local/bin', '/usr/local/bin', '/opt/lean/bin']
+  // task-28: the DRIVE-ROOT TeX Live positions come first on Windows (the observed real-host layout);
+  // the legacy entries keep their relative order. Unix keeps the legacy order and adds the system
+  // MacTeX bin dir last (a documented root, not a guess).
   const knownTex = win
-    ? [pf + '/texlive', pf86 + '/texlive', local ? local + '/Programs/MiKTeX/miktex/bin/x64' : null, pf + '/MiKTeX/miktex/bin/x64']
-    : [home + '/Library/TeX/texbin', '/usr/local/texlive', home + '/.TinyTeX/bin', '/opt/texlive']
+    ? TEX_DRIVE_YEAR_ROOTS.concat([pf + '/texlive', pf86 + '/texlive', local ? local + '/Programs/MiKTeX/miktex/bin/x64' : null, pf + '/MiKTeX/miktex/bin/x64'])
+    : [home + '/Library/TeX/texbin'].concat(TEX_SYSTEM_YEAR_ROOTS, [home + '/.TinyTeX/bin'], TEX_SYSTEM_BIN_ROOTS)
   const list = kind === 'tex' ? knownTex : knownLean
   // 1) EXPLICIT: only it, never a guess.
   if (explicit) {
@@ -83,19 +109,35 @@ async function resolveKnownTool(sub, opts) {
   if (typeof sub.resolveExecutable === 'function') {
     try { const p = await sub.resolveExecutable(name); if (p) return { exe: String(p), via: 'path', tried, name } } catch (e) { /* PATH miss is expected */ }
   }
-  // 3) KNOWN INSTALL LOCATIONS (Windows TeX roots are globbed per release: <root>/<year>/bin/windows).
+  // 3) KNOWN INSTALL LOCATIONS. A TeX root WITHOUT a `bin` segment is year-globbed
+  //    (`<root>/<year>/bin/<platform>`): the years actually on disk (newest first) first, then the
+  //    recent-year window, at most TEX_YEAR_LOOKBACK of them. task-28: the whole stage is BOUNDED by
+  //    TEX_CANDIDATE_CAP candidate paths — documented roots, never a whole-drive scan.
+  const texYearSubdirs = win ? ['bin/windows'] : ['bin/x86_64-linux', 'bin/aarch64-linux', 'bin/universal-darwin', 'bin']
+  const texRecentYears = () => { const now = new Date().getFullYear(); const out = []; for (let i = 0; i < TEX_YEAR_LOOKBACK; i++) out.push(String(now - i)); return out }
+  let texProbes = 0
   for (const base of list) {
     if (!base) continue
     if (kind === 'tex' && !/bin/i.test(base)) {
-      for (const year of await listDirs(base)) {
-        for (const sub2 of ['bin/windows', 'bin/x86_64-linux', 'bin/universal-darwin', 'bin']) {
-          const p = await resolvePath(base + '/' + year + '/' + sub2 + '/' + name)
+      const onDisk = (await listDirs(texProbeBase(base))).filter((d) => /^\d{4}$/.test(d)).sort((a, b) => Number(b) - Number(a))
+      const years = onDisk.concat(texRecentYears().filter((y) => onDisk.indexOf(y) < 0)).slice(0, TEX_YEAR_LOOKBACK)
+      for (const year of years) {
+        for (const sub2 of texYearSubdirs) {
+          if (texProbes >= TEX_CANDIDATE_CAP) break
+          texProbes++
+          const p = await resolvePath(texProbeBase(base) + '/' + year + '/' + sub2 + '/' + name)
           if (p) return { exe: p, via: 'known-install', tried, name }
         }
+        if (texProbes >= TEX_CANDIDATE_CAP) break
       }
+      if (texProbes >= TEX_CANDIDATE_CAP) break
       continue
     }
-    const p = await resolvePath(base + '/' + name)
+    if (kind === 'tex') {
+      if (texProbes >= TEX_CANDIDATE_CAP) break
+      texProbes++
+    }
+    const p = await resolvePath(texProbeBase(base) + '/' + name)
     if (p) return { exe: p, via: 'known-install', tried, name }
   }
   return { exe: null, via: null, tried, name, reason: 'not found on PATH or in the known install locations' }
@@ -724,8 +766,8 @@ async function writeCurrentProject(){ try { const ok=await writeTextAbs(vibeRoot
         return {ok:false,code:'LEAN_NOT_FOUND',message:'cannot resolve "'+String(params.leanCommand||'lean')+'": '+String((e&&e.message)||e)+' — 仍可把形式化代码写下来归档，但无法在此宿主上执行',file:rel,ms:now()-started}
       }
       // §3.1: the search path is computed HERE (never persisted into `leanArgs`): user args first,
-      // then `--search-path <VibeMath root>` unless the user already stated a search root, then the
-      // file. `lake env lean` therefore becomes `lake env lean --search-path <root> <file>` for free.
+      // then `-R <VibeMath root>` unless the user already stated a search root, then the
+      // file. `lake env lean` therefore becomes `lake env lean -R <root> <file>` for free.
       const argv=leanArgv(exe, abs)
       let handle
       try {
@@ -804,12 +846,18 @@ async function writeCurrentProject(){ try { const ok=await writeTextAbs(vibeRoot
     //  · ONLY a settled, green job whose file STILL MATCHES the enqueued content hash may set
     //    `passed` / write `Verified/Lean/<id>.lean`; every other outcome stays `attempted`.
     const LEAN_ASYNC_ON = () => params.leanAsync !== false
-    // §3.6: the flag spelling is one constant on purpose — if a toolchain wants `-R <root>`, only
-    // this line changes and the interface stays put.
-    const LEAN_SEARCH_PATH_FLAG = '--search-path'
+    // task-27 (real-host A round + local reproduction): Lean 4 wants `-R`/`--root` (or LEAN_PATH); the
+    // `--search-path` spelling is Lean 3 and makes `lean` fail at ARGUMENT PARSING (rc=1) before it reads the file.
+    // Local check on Lean 4.34.0: `lean --search-path <dir> <f>` ⇒ rc=1; `lean -R <dir> <f>` ⇒ accepted.
+    const LEAN_SEARCH_PATH_FLAG = '-R'
     const LEAN_READ_MAX_BYTES = 64 * 1024
-    /** §3.1: never inject when the user already stated a search root (explicit config wins). */
-    function leanHasSearchFlag(args){ return (Array.isArray(args)?args:[]).some(a=>{ const s=String(a); return s===LEAN_SEARCH_PATH_FLAG||s.indexOf(LEAN_SEARCH_PATH_FLAG+'=')===0||s==='-R'||s==='--root' }) }
+    /** §3.1: never inject when the user already stated a search root (explicit config wins).
+     *  task-27: the flag we INJECT is `-R` (Lean 4). A user may still state any of these in `leanArgs` —
+     *  the LEGACY Lean-3 spelling included — and this guard's only job is "never inject a SECOND search root". */
+    function leanHasSearchFlag(args){
+      const ALSO_ACCEPTED=['--search-path','--root']
+      return (Array.isArray(args)?args:[]).some(a=>{ const s=String(a); return s===LEAN_SEARCH_PATH_FLAG||s.indexOf(LEAN_SEARCH_PATH_FLAG+'=')===0||ALSO_ACCEPTED.some(f=>s===f||s.indexOf(f+'=')===0) })
+    }
     /** AMENDMENT §2: the roots to inject — USER paths first, then the automatic VibeMath root,
      *  de-duplicated, order preserved. */
     function leanSearchPathList(){
@@ -2319,7 +2367,10 @@ async function writeCurrentProject(){ try { const ok=await writeTextAbs(vibeRoot
         // speaker must have produced an explicit `true`.
         const speakers=Object.values(st.inputs)
         const allSolved = allSpoke && speakers.length>0 && speakers.every(iv=>iv.voteSolved===true)
-        logActivity('meeting', 'concluded'+(allSolved?' → ALL agree solved':' (no unanimous solved vote)'))
+        // task-25 (real-host R3): the log said only "(no unanimous solved vote)", so nobody could tell WHICH
+        // resident had not voted true (a member even concluded "the vote was never registered"). Name them.
+        const notTrue = allSpoke ? Object.entries(st.inputs).filter(([,iv])=>iv.voteSolved!==true).map(([id])=>id) : []
+        logActivity('meeting', 'concluded'+(allSolved?' → ALL agree solved':' (no unanimous solved vote'+(notTrue.length?'；未投 true：'+notTrue.join('、'):'')+')'))
         if(allSolved){
           // ── FINAL PAPER ENTRY (docs/final-paper.md §A1) ─────────────────────────────────────────────────
           // The paper phase MUST start HERE, BEFORE `running=false; autoDone=true` and before the
@@ -2890,7 +2941,7 @@ try { ok = await wakeResident(r, await heartbeatPrompt(r), 'normal') } catch(e){
       // because a manually triggered paper legitimately runs on an already-concluded run.
       if(kind.indexOf('paper:')===0){ await onPaperWakeEnd(r,parsed); return }
       if(kind==='meeting' && meetingState){
-        meetingState.inputs[r.rId]={input:parsed.input||parsed.summary||'',voteSolved:typeof parsed.voteSolved==='boolean'?parsed.voteSolved:null,propose_verify:parsed.propose_verify||null,propose_task:parsed.propose_task||null,task_desc:parsed.task_desc||'',claim_task:parsed.claim_task||null}
+        meetingState.inputs[r.rId]={input:(parsed.input||parsed.summary||'').trim()||'（本轮结束块未含 input/summary：框架按空发言记录，见 docs/final-paper.md）',voteSolved:typeof parsed.voteSolved==='boolean'?parsed.voteSolved:null,propose_verify:parsed.propose_verify||null,propose_task:parsed.propose_task||null,task_desc:parsed.task_desc||'',claim_task:parsed.claim_task||null}
         meetingState.lastInputAt=now()
         if(parsed.propose_verify) maybeQueueVerify(parsed.propose_verify, r.rId)
         await saveAll()
@@ -3097,8 +3148,8 @@ try { ok = await wakeResident(r, await heartbeatPrompt(r), 'normal') } catch(e){
       const head=zh
         ? '【最终论文·团队合写】你（'+rid+'）是本次运行的参与常驻。'
         : '[FINAL PAPER — TEAM CO-AUTHORING] You ('+rid+') are a participating resident of this run.'
-      const common=(zh?'\n论文目录：`'+ps.dir+'/`（一切写入必须在这里面）。只整理**已有证据**：你自己的库、Verified/、Shared/meetings|debates/ 与既有卡片；**不得编造**；未决/被否证的条目必须显式标注。\n检测不到 LaTeX 引擎时：① 只在文档化的常见 TeX 根与 PATH 上做有界核查（如 where xelatex、latexmk --version），不要全盘扫描；② 找到绝对路径后写入 paperLatexCommand 并重新检测，再继续；③ 仍找不到就向用户问一次（安装 TeX 需用户明确同意）；④ 无应答则照旧降级（只交付 paper.tex 与 paper.md）。硬边界：绝不自动安装；绝不写工作区之外；绝不把"未检测到"当失败。'
-        :'\nPaper directory: `'+ps.dir+'/` (everything you write stays inside it). Only organise EXISTING evidence (your own library, Verified/, Shared/meetings|debates/, the recorded cards); never invent; flag unresolved/refuted items explicitly.\nWhen no LaTeX engine is detected: (1) probe only the documented common TeX roots and PATH (e.g. where xelatex, latexmk --version) - never scan whole drives; (2) once the absolute path is found, write it into paperLatexCommand, re-detect, then continue; (3) if it is still missing, ask the user once (installing TeX requires the user\'s explicit approval); (4) with no answer, degrade exactly as today (deliver paper.tex and paper.md only). Hard boundaries: never auto-install; never write outside the workspace; never treat "not detected" as a failure.')
+      const common=(zh?'\n论文目录：`'+ps.dir+'/`（一切写入必须在这里面）。只整理**已有证据**：你自己的库、Verified/、Shared/meetings|debates/ 与既有卡片；**不得编造**；未决/被否证的条目必须显式标注。\n检测不到 LaTeX 引擎时：① 只在文档化的常见 TeX 根与 PATH 上做有界核查（如 where xelatex、latexmk --version），不要全盘扫描——**最常见的情形是引擎装了但不在 PATH**：TeX Live 若装在 Windows 的某个**盘根**下，看该盘根里的 `texlive\\<年份>\\bin\\windows`；类 Unix 看标准系统路径 `/usr/local/texlive/<年份>/bin/*`、`/opt/texlive/<年份>/bin/*`；macOS 看 `/Library/TeX/texbin`；② 找到绝对路径后写入 paperLatexCommand 并重新检测，再继续；③ 仍找不到就**如实上报所办（或群聊）**，由**所办**向用户确认（安装 TeX 需用户明确同意）；④ 尚无回应则照旧降级（只交付 paper.tex 与 paper.md）。硬边界：绝不自动安装；绝不写工作区之外；绝不把"未检测到"当失败。'
+        :'\nPaper directory: `'+ps.dir+'/` (everything you write stays inside it). Only organise EXISTING evidence (your own library, Verified/, Shared/meetings|debates/, the recorded cards); never invent; flag unresolved/refuted items explicitly.\nWhen no LaTeX engine is detected: (1) probe only the documented common TeX roots and PATH (e.g. where xelatex, latexmk --version) - never scan whole drives; the MOST COMMON case is an engine that IS installed but NOT on PATH — a DRIVE-ROOT Windows TeX Live lives under `texlive\\<year>\\bin\\windows` on that drive, Unix under the standard system paths `/usr/local/texlive/<year>/bin/*` or `/opt/texlive/<year>/bin/*`, macOS at `/Library/TeX/texbin`; (2) once the absolute path is found, write it into paperLatexCommand, re-detect, then continue; (3) if it is still missing, REPORT IT TO THE OFFICE (or the group chat) and let the OFFICE confirm with the user (installing TeX requires the user\'s explicit approval); (4) with no answer yet, degrade exactly as today (deliver paper.tex and paper.md only). Hard boundaries: never auto-install; never write outside the workspace; never treat "not detected" as a failure.')
       if(kind==='part') return PAPER_MARK.part+'\n'+head+'\n'+(again?(zh?'（上一次没有收到你的部分，请重发。）\n':'(no part was received from you last time — please resend.)\n'):'')
         +(zh?'请撰写**你负责的那一部分**（你库里的命题/方法/子问题/进展，以及你亲自参与的会议与争论中确立的内容），成文即可，不必追求篇幅。\n'
             :'Write the part YOU own (the propositions/methods/sub-problems/progress in your library and what you personally established in meetings/debates).\n')
@@ -3599,7 +3650,7 @@ try { ok = await wakeResident(r, await heartbeatPrompt(r), 'normal') } catch(e){
         ps.status='failed'   // terminal, like a failed compile: no complete deliverable is claimed
         if(!warnedPaperWrite){ warnedPaperWrite=true; console.error('vibe-math-v4: paperFinalize: required paper artifact(s) MISSING after finalize (' + _paperGone.join(', ') + ') - the paper is marked FAILED instead of done; the deliverable is incomplete and `files` never claims a missing artifact') }
       }
-      const warn=[ps.warning,ps.compile&&ps.compile.result==='failed'?ps.compile.error:'',ps.compile&&ps.compile.result==='not-detected'?('未检测到 LaTeX 引擎（'+(ps.compile.reason||'')+'）：只产出 tex+md，不编译。已探测 PATH 与文档化的常见 TeX 根；可用 paperLatexCommand 指定绝对路径。'):''].filter(Boolean).join('；')
+      const warn=[ps.warning,ps.compile&&ps.compile.result==='failed'?ps.compile.error:'',ps.compile&&ps.compile.result==='not-detected'?('未检测到 LaTeX 引擎（'+(ps.compile.reason||'')+'）：只产出 tex+md，不编译。已探测 PATH 与文档化的常见 TeX 根；可用 paperLatexCommand 指定绝对路径。最常见的情形是引擎已安装但不在 PATH（Windows 盘根下的 texlive\\<年>\\bin\\windows、类 Unix /usr/local|/opt/texlive/<年>/bin/*、macOS /Library/TeX/texbin 已纳入有界探测）：把引擎的绝对路径写进 paperLatexCommand 再探测一次；仍找不到就如实上报所办（由所办向用户确认安装），随后照旧安全降级。'):''].filter(Boolean).join('；')
       if(warn) ps.warning=warn   // task-11: the compile note must reach the finalize return + status view (the paper body is composed before ps.compile exists)
       if(warn) logActivity('paper','最终论文完成（有警告）：'+ps.dir+'｜'+warn)
       else logActivity('paper','最终论文完成：'+ps.dir+'（'+ps.files.join('、')+(ps.compile?('｜编译 '+(ps.compile.result||'')):'')+'）')
@@ -4206,7 +4257,7 @@ frozenParticipants: (activeRosterSnapshot()||{}).rosterSnapshot||null,   // depr
   // MODE is dynamic — switching it changes the very next prompt), leanCommand/leanArgs select the
   // executable, leanTimeoutMs bounds one run. Invalid values fall back to the defaults and an
   // unknown mode degrades to 'off' (never to a STRONGER mode).
-  registerTool('vibe_v4_set','Set V4 parameters: residentCount (how many residents a start spawns), compactThreshold (resident context % that triggers a compaction) and compactAfterRounds (rounds between soft compactions), meetingKeepEvery (every N newly accumulated artifacts an automatic sync meeting is convened), maxParallel (how many residents may be woken concurrently), activityTimeoutMs (idle window before a resident is nudged; also the heartbeat/watchdog period), stallAutoMeetingMs (how long the group may make NO progress before an auto sync meeting is convened), verdictMaxRounds (how many verification rounds one object gets: 1 independent round + re-vote debate rounds), model/provider override resident LLM route (empty=inherit main); toolAllow/toolDeny restrict resident tools (arrays of tool names); residentPersona adds a persona line; formalVerify: "off" (default, a true no-op) | "encourage" (residents decide by implementation difficulty whether to formalize in Lean; a passing Lean run turns the vote into a FIDELITY review of the Lean statements) | "require" (same, plus a gate: a unanimous true/false verdict is withheld as undecided until the object is Lean-passed or has an explicit reasoned blocker record); leanCommand/leanArgs/leanTimeoutMs configure the toolchain; leanAsync (default true) ENQUEUES each compile to a per-session background queue (concurrency 1, budget = leanTimeoutMs) and returns immediately with async:{jobId,state:\'queued\'} — results are announced in the next prompt and visible in vibe_v4_lean_lib.jobs; set leanAsync=false for the historical synchronous await; leanInitiative: "off" | "normal" (default) | "eager" is how PROACTIVE the group should be while working (it never changes what formalVerify requires at voting time); leanSearchPaths (array, default empty) adds extra compiler search roots — they are injected BEFORE the automatic VibeMath root, de-duplicated, and an explicit --search-path/-R/--root in leanArgs still wins; leanJobsMaxParallel (default 1) caps how many background compiles run at once; mathComputation: "auto" (default) | "on" | "off" enables the math_computation tool (off = a true no-op: no probe and no prompt line), mathMode: "typed+shell" (default) | "typed" drops the host-shell fallback and refuses the cli engine, mathEngines limits which engines may run (default python|r|octave|julia|matlab|maple|wolfram|cli), mathTimeoutMs bounds one computation, mathPackages is the pre-checked package list, mathInstallScope: "user" (default) | "system" is the scope an approved install plan may use (system applies to that request only and is never remembered); finalPaper (default true) writes the run\'s final PAPER automatically once the closing meeting votes unanimously to stop, paperFormat: "both" (default) | "md" | "tex" decides which text versions are produced, paperLanguage: "zh" (default) | "en", paperCompilePdf (default true) compiles a PDF when a LaTeX engine is actually detected (xelatex|latexmk|pdflatex|lualatex|tectonic, overridable via paperLatexCommand), paperEditor: "office" (default — the session root/human side) | "resident:<id>" names who finalises the merged draft after the cross-review round. A key outside this list is refused (ok:false, ignored:[...]) instead of being silently dropped.',objParams({residentCount:{type:'integer'},compactAfterRounds:{type:'integer'},compactThreshold:{type:'integer'},meetingKeepEvery:{type:'integer'},maxParallel:{type:'integer'},activityTimeoutMs:{type:'integer'},verdictMaxRounds:{type:'integer'},stallAutoMeetingMs:{type:'integer'},provider:{type:'string'},model:{type:'string'},residentPersona:{type:'string'},toolAllow:{type:'array',items:{type:'string'}},toolDeny:{type:'array',items:{type:'string'}},formalVerify:{type:'string',enum:['off','encourage','require']},leanCommand:{type:'string'},leanArgs:{type:'array',items:{type:'string'}},leanTimeoutMs:{type:'integer'},finalPaper:{type:'boolean'},paperFormat:{type:'string',enum:['both','md','tex']},paperLanguage:{type:'string',enum:['zh','en']},paperCompilePdf:{type:'boolean'},paperEditor:{type:'string'},paperLatexCommand:{type:'string'},leanAsync:{type:'boolean'},leanInitiative:{type:'string',enum:['off','normal','eager']},leanSearchPaths:{type:'array',items:{type:'string'}},leanJobsMaxParallel:{type:'integer'},mathComputation:{type:'string',enum:['auto','on','off']},mathMode:{type:'string',enum:['typed+shell','typed']},mathEngines:{type:'array',items:{type:'string'}},mathTimeoutMs:{type:'integer'},mathPackages:{type:'array',items:{type:'string'}},mathInstallScope:{type:'string',enum:['user','system']}}),(s,a)=>{ const r=s.setParams(a); const st=s.status(); if(r&&r.ok===false) return Object.assign({},st,{ok:false,warning:r.message,ignored:r.ignored}); return st })
+  registerTool('vibe_v4_set','Set V4 parameters: residentCount (how many residents a start spawns), compactThreshold (resident context % that triggers a compaction) and compactAfterRounds (rounds between soft compactions), meetingKeepEvery (every N newly accumulated artifacts an automatic sync meeting is convened), maxParallel (how many residents may be woken concurrently), activityTimeoutMs (idle window before a resident is nudged; also the heartbeat/watchdog period), stallAutoMeetingMs (how long the group may make NO progress before an auto sync meeting is convened), verdictMaxRounds (how many verification rounds one object gets: 1 independent round + re-vote debate rounds), model/provider override resident LLM route (empty=inherit main); toolAllow/toolDeny restrict resident tools (arrays of tool names); residentPersona adds a persona line; formalVerify: "off" (default, a true no-op) | "encourage" (residents decide by implementation difficulty whether to formalize in Lean; a passing Lean run turns the vote into a FIDELITY review of the Lean statements) | "require" (same, plus a gate: a unanimous true/false verdict is withheld as undecided until the object is Lean-passed or has an explicit reasoned blocker record); leanCommand/leanArgs/leanTimeoutMs configure the toolchain; leanAsync (default true) ENQUEUES each compile to a per-session background queue (concurrency 1, budget = leanTimeoutMs) and returns immediately with async:{jobId,state:\'queued\'} — results are announced in the next prompt and visible in vibe_v4_lean_lib.jobs; set leanAsync=false for the historical synchronous await; leanInitiative: "off" | "normal" (default) | "eager" is how PROACTIVE the group should be while working (it never changes what formalVerify requires at voting time); leanSearchPaths (array, default empty) adds extra compiler search roots — they are injected BEFORE the automatic VibeMath root, de-duplicated, and an explicit -R/--root in leanArgs still wins; leanJobsMaxParallel (default 1) caps how many background compiles run at once; mathComputation: "auto" (default) | "on" | "off" enables the math_computation tool (off = a true no-op: no probe and no prompt line), mathMode: "typed+shell" (default) | "typed" drops the host-shell fallback and refuses the cli engine, mathEngines limits which engines may run (default python|r|octave|julia|matlab|maple|wolfram|cli), mathTimeoutMs bounds one computation, mathPackages is the pre-checked package list, mathInstallScope: "user" (default) | "system" is the scope an approved install plan may use (system applies to that request only and is never remembered); finalPaper (default true) writes the run\'s final PAPER automatically once the closing meeting votes unanimously to stop, paperFormat: "both" (default) | "md" | "tex" decides which text versions are produced, paperLanguage: "zh" (default) | "en", paperCompilePdf (default true) compiles a PDF when a LaTeX engine is actually detected (xelatex|latexmk|pdflatex|lualatex|tectonic, overridable via paperLatexCommand), paperEditor: "office" (default — the session root/human side) | "resident:<id>" names who finalises the merged draft after the cross-review round. A key outside this list is refused (ok:false, ignored:[...]) instead of being silently dropped.',objParams({residentCount:{type:'integer'},compactAfterRounds:{type:'integer'},compactThreshold:{type:'integer'},meetingKeepEvery:{type:'integer'},maxParallel:{type:'integer'},activityTimeoutMs:{type:'integer'},verdictMaxRounds:{type:'integer'},stallAutoMeetingMs:{type:'integer'},provider:{type:'string'},model:{type:'string'},residentPersona:{type:'string'},toolAllow:{type:'array',items:{type:'string'}},toolDeny:{type:'array',items:{type:'string'}},formalVerify:{type:'string',enum:['off','encourage','require']},leanCommand:{type:'string'},leanArgs:{type:'array',items:{type:'string'}},leanTimeoutMs:{type:'integer'},finalPaper:{type:'boolean'},paperFormat:{type:'string',enum:['both','md','tex']},paperLanguage:{type:'string',enum:['zh','en']},paperCompilePdf:{type:'boolean'},paperEditor:{type:'string'},paperLatexCommand:{type:'string'},leanAsync:{type:'boolean'},leanInitiative:{type:'string',enum:['off','normal','eager']},leanSearchPaths:{type:'array',items:{type:'string'}},leanJobsMaxParallel:{type:'integer'},mathComputation:{type:'string',enum:['auto','on','off']},mathMode:{type:'string',enum:['typed+shell','typed']},mathEngines:{type:'array',items:{type:'string'}},mathTimeoutMs:{type:'integer'},mathPackages:{type:'array',items:{type:'string'}},mathInstallScope:{type:'string',enum:['user','system']}}),(s,a)=>{ const r=s.setParams(a); const st=s.status(); if(r&&r.ok===false) return Object.assign({},st,{ok:false,warning:r.message,ignored:r.ignored}); return st })
   // resident-facing tools: route to the CALLING resident (exec.agent.id === childId);
   // fall back to the last-woken resident when called by the host/assistant.
   registerTool('vibe_v4_send_message','(resident) Send a message to another resident (to=all broadcasts to the whole team).',objParams({to:{type:'string'},content:{type:'string'}},['to','content']),(s,a,x)=>{ const from=s.residentIdOf(x); if(!from) return {ok:false,message:'no such resident'}; if(String(a.to)==='all') return s.broadcast(a.content, from); return s.postMessage(from,a.to,a.content) })

package/vibe-math-v5/agent.cordis.yml

@@ -112,8 +112,8 @@
           verification (execute / archive / list the reuse library / read an archived file
           verbatim / watch the background compile queue). Members use them too; they work in every mode.
         - math_computation {op: probe|run|receipt|install, engine, mode: code|file|expr, …} — 先 probe 预检引擎/包/许可，再调引擎计算并把脚本与输出归档成可复核回执；缺引擎/缺包只报告与给安装指引/计划；shell 兜底不算归档。
-        - 归档→编辑→重跑：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true` 与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
-        - Archive -> edit -> re-run: for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
+        - 归档→编辑→重跑（**回执＝一次 math_computation 调用的 JSON 结果**：先 probe 或 run 一次，它有哪些字段就一目了然）：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true`（脚本内容相对上一份回执变过）与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
+        - Archive -> edit -> re-run (a RECEIPT is the JSON result of ONE math_computation call - run `probe` or `run` once and the fields below are right there in front of you): for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` (the script content differs from the previous receipt) and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
         - 替代必须声明（诚实性）：当替代方案改变了**精确性或结论强度**时（精确符号解 → 数值近似、闭式解 → 采样/求积、改了精度/容差/假设、换了算法类），结论里**必须写明**，不得读起来像得到了原本（精确/所要求的）结果；拿不到精确结果就直说。
         - Declare substitutions (honesty): when an alternative changes EXACTNESS or conclusion strength (exact symbolic solution -> numerical approximation, closed form -> sampling/quadrature, changed precision/tolerances/assumptions, a different algorithm class), the conclusion MUST say so explicitly and must not read as if the original (exact/requested) result had been obtained; if the exact result is unavailable, say so plainly.
       A /v5 slash command mirrors these (configure|start|resume|pause|stop|status|report|members|message|meeting|hire|fire|add|remove|set|paper).
@@ -143,7 +143,7 @@
           small lemmas/propositions/definitions into the library even in ordinary rounds).
         - Reuse first: check vibe_v5_lean_lib BEFORE writing a definition, reuse archived
           content via `import Formal.Lib.<name>` / `import Formal.Proved.<name>` (the compile
-          gets `--search-path <VibeMath root>`, preceded by any leanSearchPaths), or copy the
+          gets `-R <VibeMath root>`, preceded by any leanSearchPaths), or copy the
           exact text with vibe_v5_lean_read. Re-archiving identical content is de-duplicated.
         - Compiles are ASYNC by default (leanAsync=true, leanJobsMaxParallel default 1):
           vibe_v5_lean_run / vibe_v5_lean_archive enqueue and return at once; watch them with
@@ -245,8 +245,8 @@
           verification (execute / archive / list the reuse library / read an archived file
           verbatim / watch the background compile queue). Members use them too; they work in every mode.
         - math_computation {op: probe|run|receipt|install, engine, mode: code|file|expr, …} — 先 probe 预检引擎/包/许可，再调引擎计算并把脚本与输出归档成可复核回执；缺引擎/缺包只报告与给安装指引/计划；shell 兜底不算归档。
-        - 归档→编辑→重跑：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true` 与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
-        - Archive -> edit -> re-run: for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
+        - 归档→编辑→重跑（**回执＝一次 math_computation 调用的 JSON 结果**：先 probe 或 run 一次，它有哪些字段就一目了然）：mode:'code' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:'file' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true`（脚本内容相对上一份回执变过）与 `previousReceipt`（指向上一次）。**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。
+        - Archive -> edit -> re-run (a RECEIPT is the JSON result of ONE math_computation call - run `probe` or `run` once and the fields below are right there in front of you): for mode:'code' the script original is at the receipt's scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:'file' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` (the script content differs from the previous receipt) and `previousReceipt` pointing at the previous attempt. Pointing mode:'file' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.
         - 替代必须声明（诚实性）：当替代方案改变了**精确性或结论强度**时（精确符号解 → 数值近似、闭式解 → 采样/求积、改了精度/容差/假设、换了算法类），结论里**必须写明**，不得读起来像得到了原本（精确/所要求的）结果；拿不到精确结果就直说。
         - Declare substitutions (honesty): when an alternative changes EXACTNESS or conclusion strength (exact symbolic solution -> numerical approximation, closed form -> sampling/quadrature, changed precision/tolerances/assumptions, a different algorithm class), the conclusion MUST say so explicitly and must not read as if the original (exact/requested) result had been obtained; if the exact result is unavailable, say so plainly.
       A /v5 slash command mirrors these (configure|start|resume|pause|stop|status|report|members|message|meeting|hire|fire|add|remove|set|paper).
@@ -276,7 +276,7 @@
           small lemmas/propositions/definitions into the library even in ordinary rounds).
         - Reuse first: check vibe_v5_lean_lib BEFORE writing a definition, reuse archived
           content via `import Formal.Lib.<name>` / `import Formal.Proved.<name>` (the compile
-          gets `--search-path <VibeMath root>`, preceded by any leanSearchPaths), or copy the
+          gets `-R <VibeMath root>`, preceded by any leanSearchPaths), or copy the
           exact text with vibe_v5_lean_read. Re-archiving identical content is de-duplicated.
         - Compiles are ASYNC by default (leanAsync=true, leanJobsMaxParallel default 1):
           vibe_v5_lean_run / vibe_v5_lean_archive enqueue and return at once; watch them with

package/vibe-math-v5/math-computation.js

@@ -87,13 +87,13 @@ export const MATH_PERSONA_TOOL_LINE = '- math_computation {op: probe|run|receipt
 // P2a: the archive -> edit -> re-run workflow. Injected into every preset's rule block (and appended
 // to both persona blocks) so an agent cannot miss that (a) the script is archived, (b) it may edit
 // it, and (c) re-running is what produces evidence for the edited code.
-export const MATH_ARCHIVE_WORKFLOW_LINE = '- 归档→编辑→重跑：mode:\'code\' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；'
+export const MATH_ARCHIVE_WORKFLOW_LINE = '- 归档→编辑→重跑（**回执＝一次 math_computation 调用的 JSON 结果**：先 probe 或 run 一次，它有哪些字段就一目了然）：mode:\'code\' 的脚本原件在回执的 scriptPath（Computation/<id>/script.<ext>，**相对项目根**）；'
   + '**成员的文件工具是按会话 cwd 解析的**，所以读它要用**绝对路径** `receipt.scriptAbs`，或把 `receipt.cwd` 与 `receipt.scriptPath` 拼起来（回执两个字段都有）。'
-  + '要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:\'file\' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true` 与 `previousReceipt`（指向上一次）。'
+  + '要拿到"改过代码"的证据，请**编辑你最初运行的那个源文件**，再用 mode:\'file\' 指向**同一个源路径**重跑：归档 id 以**源路径**为键，因此这落在**同一归档**的 **attempt ≥ 2**，并给出 `scriptChanged:true`（脚本内容相对上一份回执变过）与 `previousReceipt`（指向上一次）。'
   + '**指向归档副本本身**（`receipt.scriptAbs` 那个路径）按设计是**另一份新归档**：新 id、attempt 1、没有 `previousReceipt`、`scriptChanged:false`；旧 attempt 绝不会被覆盖，但它**不是**"同一归档的新 attempt"——工具会用 `fileIsArchivedScript` 与 `ARCHIVED_SCRIPT_RERUN` 警告明确说明。'
   + '**旧回执对修改后的代码无效**——报告里必须引用与当前代码哈希一致的那份回执；工具会在 scriptChanged / scriptChangedDuringRun 为 true 时显式告警。'
 
-export const MATH_ARCHIVE_WORKFLOW_LINE_EN = '- Archive -> edit -> re-run: for mode:\'code\' the script original is at the receipt\'s scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:\'file\' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` and `previousReceipt` pointing at the previous attempt. Pointing mode:\'file\' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.'
+export const MATH_ARCHIVE_WORKFLOW_LINE_EN = '- Archive -> edit -> re-run (a RECEIPT is the JSON result of ONE math_computation call - run `probe` or `run` once and the fields below are right there in front of you): for mode:\'code\' the script original is at the receipt\'s scriptPath (Computation/<id>/script.<ext>, **relative to the project root**); member file tools resolve paths against the SESSION CWD, so READ it via the ABSOLUTE `receipt.scriptAbs`, or join `receipt.cwd` with `receipt.scriptPath` (both are in the receipt). To produce evidence for EDITED code, edit the SOURCE FILE you originally ran and re-run mode:\'file\' pointing at THAT SAME PATH: the archive id is keyed by the SOURCE PATH, so this lands on the SAME archive as attempt >= 2, with `scriptChanged:true` (the script content differs from the previous receipt) and `previousReceipt` pointing at the previous attempt. Pointing mode:\'file\' at the ARCHIVED COPY itself (the `receipt.scriptAbs` path) is a DIFFERENT archive BY DESIGN - a new id, attempt 1, no `previousReceipt`, `scriptChanged:false`: the earlier attempt is never overwritten, but it is NOT "a new attempt of the same archive", and the tool says so via `fileIsArchivedScript` and the `ARCHIVED_SCRIPT_RERUN` warning. **An old receipt is NOT evidence for edited code** - cite the receipt whose scriptHash matches the current code; the tool warns explicitly via scriptChanged / scriptChangedDuringRun.'
 
 // Round-6 (A): honesty about SUBSTITUTIONS. An alternative that weakens exactness or conclusion
 // strength must be declared, and the conclusion must never read as if the requested (exact) result
@@ -1468,13 +1468,13 @@ export function mathAvailabilityLine(probe, lang, mathMode) {
   const mode = mathMode || MATH_PARAM_DEFAULTS.mathMode
   const list = (probe && probe.engines ? probe.engines : []).map((e) => e.name + ' ' + (e.version || '?')).join('、')
   if (lang === 'en') {
-    const head = '- math_computation: available ' + (list || '(none)') + '. Probe first, then run'
+    const head = '- math_computation: available engines ' + (list || 'none') + '. Probe first, then run'
       + ' (the tool path leaves a re-runnable receipt - cite it). If a package is missing, say so and offer a fallback or an install plan;'
       + ' installing requires a plan plus confirmation.'
     const shell = mode === 'typed+shell' ? '\n' + MATH_SHELL_RULE_LINE_EN : ''
     return head + shell + '\n' + MATH_ARCHIVE_WORKFLOW_LINE_EN + '\n' + MATH_RULE_LINES_EN.join('\n')
   }
-  const head = '- math_computation：本机可用 ' + (list || '（无）') + '。需要数值/符号/统计计算时先 probe 再 run'
+  const head = '- math_computation：可用引擎 ' + (list || '无') + '。需要数值/符号/统计计算时先 probe 再 run'
     + '（工具路径会留下可复核回执，结论请引用回执路径）；缺包时如实说明并给替代方案或安装计划（不要假装），安装需先出计划并征得确认。'
   const shell = mode === 'typed+shell' ? '\n' + MATH_SHELL_RULE_LINE : ''
   return head + shell + '\n' + MATH_ARCHIVE_WORKFLOW_LINE + '\n' + MATH_RULE_LINES.join('\n')