devstack 0.1.0

package/vendor/skills/skills/remotion-best-practices/rules/sequencing.md

@@ -0,0 +1,118 @@
+---
+name: sequencing
+description: Sequencing patterns for Remotion - delay, trim, limit duration of items
+metadata:
+  tags: sequence, series, timing, delay, trim
+---
+
+Use `<Sequence>` to delay when an element appears in the timeline.
+
+```tsx
+import { Sequence } from "remotion";
+
+const {fps} = useVideoConfig();
+
+<Sequence from={1 * fps} durationInFrames={2 * fps} premountFor={1 * fps}>
+  <Title />
+</Sequence>
+<Sequence from={2 * fps} durationInFrames={2 * fps} premountFor={1 * fps}>
+  <Subtitle />
+</Sequence>
+```
+
+This will by default wrap the component in an absolute fill element.  
+If the items should not be wrapped, use the `layout` prop:
+
+```tsx
+<Sequence layout="none">
+  <Title />
+</Sequence>
+```
+
+## Premounting
+
+This loads the component in the timeline before it is actually played.  
+Always premount any `<Sequence>`!
+
+```tsx
+<Sequence premountFor={1 * fps}>
+  <Title />
+</Sequence>
+```
+
+## Series
+
+Use `<Series>` when elements should play one after another without overlap.
+
+```tsx
+import { Series } from "remotion";
+
+<Series>
+  <Series.Sequence durationInFrames={45}>
+    <Intro />
+  </Series.Sequence>
+  <Series.Sequence durationInFrames={60}>
+    <MainContent />
+  </Series.Sequence>
+  <Series.Sequence durationInFrames={30}>
+    <Outro />
+  </Series.Sequence>
+</Series>;
+```
+
+Same as with `<Sequence>`, the items will be wrapped in an absolute fill element by default when using `<Series.Sequence>`, unless the `layout` prop is set to `none`.
+
+### Series with overlaps
+
+Use negative offset for overlapping sequences:
+
+```tsx
+<Series>
+  <Series.Sequence durationInFrames={60}>
+    <SceneA />
+  </Series.Sequence>
+  <Series.Sequence offset={-15} durationInFrames={60}>
+    {/* Starts 15 frames before SceneA ends */}
+    <SceneB />
+  </Series.Sequence>
+</Series>
+```
+
+## Frame References Inside Sequences
+
+Inside a Sequence, `useCurrentFrame()` returns the local frame (starting from 0):
+
+```tsx
+<Sequence from={60} durationInFrames={30}>
+  <MyComponent />
+  {/* Inside MyComponent, useCurrentFrame() returns 0-29, not 60-89 */}
+</Sequence>
+```
+
+## Nested Sequences
+
+Sequences can be nested for complex timing:
+
+```tsx
+<Sequence from={0} durationInFrames={120}>
+  <Background />
+  <Sequence from={15} durationInFrames={90} layout="none">
+    <Title />
+  </Sequence>
+  <Sequence from={45} durationInFrames={60} layout="none">
+    <Subtitle />
+  </Sequence>
+</Sequence>
+```
+
+## Nesting compositions within another
+
+To add a composition within another composition, you can use the `<Sequence>` component with a `width` and `height` prop to specify the size of the composition.
+
+```tsx
+<AbsoluteFill>
+  <Sequence width={COMPOSITION_WIDTH} height={COMPOSITION_HEIGHT}>
+    <CompositionComponent />
+  </Sequence>
+</AbsoluteFill>
+```

package/vendor/skills/skills/remotion-best-practices/rules/sfx.md

@@ -0,0 +1,26 @@
+---
+name: sfx
+description: Including sound effects
+metadata:
+  tags: sfx, sound, effect, audio
+---
+
+To include a sound effect, use the `<Audio>` tag:
+
+```tsx
+import { Audio } from "@remotion/sfx";
+
+<Audio src={"https://remotion.media/whoosh.wav"} />;
+```
+
+The following sound effects are available:
+
+- `https://remotion.media/whoosh.wav`
+- `https://remotion.media/whip.wav`
+- `https://remotion.media/page-turn.wav`
+- `https://remotion.media/switch.wav`
+- `https://remotion.media/mouse-click.wav`
+- `https://remotion.media/shutter-modern.wav`
+- `https://remotion.media/shutter-old.wav`
+
+For more sound effects, search the internet. A good resource is https://github.com/kapishdima/soundcn/tree/main/assets.

package/vendor/skills/skills/remotion-best-practices/rules/subtitles.md

@@ -0,0 +1,36 @@
+---
+name: subtitles
+description: subtitles and caption rules
+metadata:
+  tags: subtitles, captions, remotion, json
+---
+
+All captions must be processed in JSON. The captions must use the `Caption` type which is the following:
+
+```ts
+import type { Caption } from "@remotion/captions";
+```
+
+This is the definition:
+
+```ts
+type Caption = {
+  text: string;
+  startMs: number;
+  endMs: number;
+  timestampMs: number | null;
+  confidence: number | null;
+};
+```
+
+## Generating captions
+
+To transcribe video and audio files to generate captions, load the [./transcribe-captions.md](./transcribe-captions.md) file for more instructions.
+
+## Displaying captions
+
+To display captions in your video, load the [./display-captions.md](./display-captions.md) file for more instructions.
+
+## Importing captions
+
+To import captions from a .srt file, load the [./import-srt-captions.md](./import-srt-captions.md) file for more instructions.

package/vendor/skills/skills/remotion-best-practices/rules/tailwind.md

@@ -0,0 +1,11 @@
+---
+name: tailwind
+description: Using TailwindCSS in Remotion.
+metadata:
+---
+
+You can and should use TailwindCSS in Remotion, if TailwindCSS is installed in the project.
+
+Don't use `transition-*` or `animate-*` classes - always animate using the `useCurrentFrame()` hook.
+
+Tailwind must be installed and enabled first in a Remotion project - fetch https://www.remotion.dev/docs/tailwind using WebFetch for instructions.

package/vendor/skills/skills/remotion-best-practices/rules/text-animations.md

@@ -0,0 +1,20 @@
+---
+name: text-animations
+description: Typography and text animation patterns for Remotion.
+metadata:
+  tags: typography, text, typewriter, highlighter ken
+---
+
+## Text animations
+
+Based on `useCurrentFrame()`, reduce the string character by character to create a typewriter effect.
+
+## Typewriter Effect
+
+See [Typewriter](assets/text-animations-typewriter.tsx) for an advanced example with a blinking cursor and a pause after the first sentence.
+
+Always use string slicing for typewriter effects. Never use per-character opacity.
+
+## Word Highlighting
+
+See [Word Highlight](assets/text-animations-word-highlight.tsx) for an example for how a word highlight is animated, like with a highlighter pen.

package/vendor/skills/skills/remotion-best-practices/rules/timing.md

@@ -0,0 +1,179 @@
+---
+name: timing
+description: Interpolation curves in Remotion - linear, easing, spring animations
+metadata:
+  tags: spring, bounce, easing, interpolation
+---
+
+A simple linear interpolation is done using the `interpolate` function.
+
+```ts title="Going from 0 to 1 over 100 frames"
+import { interpolate } from "remotion";
+
+const opacity = interpolate(frame, [0, 100], [0, 1]);
+```
+
+By default, the values are not clamped, so the value can go outside the range [0, 1].  
+Here is how they can be clamped:
+
+```ts title="Going from 0 to 1 over 100 frames with extrapolation"
+const opacity = interpolate(frame, [0, 100], [0, 1], {
+  extrapolateRight: "clamp",
+  extrapolateLeft: "clamp",
+});
+```
+
+## Spring animations
+
+Spring animations have a more natural motion.  
+They go from 0 to 1 over time.
+
+```ts title="Spring animation from 0 to 1 over 100 frames"
+import { spring, useCurrentFrame, useVideoConfig } from "remotion";
+
+const frame = useCurrentFrame();
+const { fps } = useVideoConfig();
+
+const scale = spring({
+  frame,
+  fps,
+});
+```
+
+### Physical properties
+
+The default configuration is: `mass: 1, damping: 10, stiffness: 100`.  
+This leads to the animation having a bit of bounce before it settles.
+
+The config can be overwritten like this:
+
+```ts
+const scale = spring({
+  frame,
+  fps,
+  config: { damping: 200 },
+});
+```
+
+The recommended configuration for a natural motion without a bounce is: `{ damping: 200 }`.
+
+Here are some common configurations:
+
+```tsx
+const smooth = { damping: 200 }; // Smooth, no bounce (subtle reveals)
+const snappy = { damping: 20, stiffness: 200 }; // Snappy, minimal bounce (UI elements)
+const bouncy = { damping: 8 }; // Bouncy entrance (playful animations)
+const heavy = { damping: 15, stiffness: 80, mass: 2 }; // Heavy, slow, small bounce
+```
+
+### Delay
+
+The animation starts immediately by default.  
+Use the `delay` parameter to delay the animation by a number of frames.
+
+```tsx
+const entrance = spring({
+  frame: frame - ENTRANCE_DELAY,
+  fps,
+  delay: 20,
+});
+```
+
+### Duration
+
+A `spring()` has a natural duration based on the physical properties.  
+To stretch the animation to a specific duration, use the `durationInFrames` parameter.
+
+```tsx
+const spring = spring({
+  frame,
+  fps,
+  durationInFrames: 40,
+});
+```
+
+### Combining spring() with interpolate()
+
+Map spring output (0-1) to custom ranges:
+
+```tsx
+const springProgress = spring({
+  frame,
+  fps,
+});
+
+// Map to rotation
+const rotation = interpolate(springProgress, [0, 1], [0, 360]);
+
+<div style={{ rotate: rotation + "deg" }} />;
+```
+
+### Adding springs
+
+Springs return just numbers, so math can be performed:
+
+```tsx
+const frame = useCurrentFrame();
+const { fps, durationInFrames } = useVideoConfig();
+
+const inAnimation = spring({
+  frame,
+  fps,
+});
+const outAnimation = spring({
+  frame,
+  fps,
+  durationInFrames: 1 * fps,
+  delay: durationInFrames - 1 * fps,
+});
+
+const scale = inAnimation - outAnimation;
+```
+
+## Easing
+
+Easing can be added to the `interpolate` function:
+
+```ts
+import { interpolate, Easing } from "remotion";
+
+const value1 = interpolate(frame, [0, 100], [0, 1], {
+  easing: Easing.inOut(Easing.quad),
+  extrapolateLeft: "clamp",
+  extrapolateRight: "clamp",
+});
+```
+
+The default easing is `Easing.linear`.  
+There are various other convexities:
+
+- `Easing.in` for starting slow and accelerating
+- `Easing.out` for starting fast and slowing down
+- `Easing.inOut`
+
+and curves (sorted from most linear to most curved):
+
+- `Easing.quad`
+- `Easing.sin`
+- `Easing.exp`
+- `Easing.circle`
+
+Convexities and curves need be combined for an easing function:
+
+```ts
+const value1 = interpolate(frame, [0, 100], [0, 1], {
+  easing: Easing.inOut(Easing.quad),
+  extrapolateLeft: "clamp",
+  extrapolateRight: "clamp",
+});
+```
+
+Cubic bezier curves are also supported:
+
+```ts
+const value1 = interpolate(frame, [0, 100], [0, 1], {
+  easing: Easing.bezier(0.8, 0.22, 0.96, 0.65),
+  extrapolateLeft: "clamp",
+  extrapolateRight: "clamp",
+});
+```

package/vendor/skills/skills/remotion-best-practices/rules/transcribe-captions.md

@@ -0,0 +1,70 @@
+---
+name: transcribe-captions
+description: Transcribing audio to generate captions in Remotion
+metadata:
+  tags: captions, transcribe, whisper, audio, speech-to-text
+---
+
+# Transcribing audio
+
+To transcribe audio to generate captions in Remotion, you can use the [`transcribe()`](https://www.remotion.dev/docs/install-whisper-cpp/transcribe) function from the [`@remotion/install-whisper-cpp`](https://www.remotion.dev/docs/install-whisper-cpp) package.
+
+## Prerequisites
+
+First, the @remotion/install-whisper-cpp package needs to be installed.
+If it is not installed, use the following command:
+
+```bash
+npx remotion add @remotion/install-whisper-cpp
+```
+
+## Transcribing
+
+Make a Node.js script to download Whisper.cpp and a model, and transcribe the audio.
+
+```ts
+import path from "path";
+import {
+  downloadWhisperModel,
+  installWhisperCpp,
+  transcribe,
+  toCaptions,
+} from "@remotion/install-whisper-cpp";
+import fs from "fs";
+
+const to = path.join(process.cwd(), "whisper.cpp");
+
+await installWhisperCpp({
+  to,
+  version: "1.5.5",
+});
+
+await downloadWhisperModel({
+  model: "medium.en",
+  folder: to,
+});
+
+// Convert the audio to a 16KHz wav file first if needed:
+// import {execSync} from 'child_process';
+// execSync('ffmpeg -i /path/to/audio.mp4 -ar 16000 /path/to/audio.wav -y');
+
+const whisperCppOutput = await transcribe({
+  model: "medium.en",
+  whisperPath: to,
+  whisperCppVersion: "1.5.5",
+  inputPath: "/path/to/audio123.wav",
+  tokenLevelTimestamps: true,
+});
+
+// Optional: Apply our recommended postprocessing
+const { captions } = toCaptions({
+  whisperCppOutput,
+});
+
+// Write it to the public/ folder so it can be fetched from Remotion
+fs.writeFileSync("captions123.json", JSON.stringify(captions, null, 2));
+```
+
+Transcribe each clip individually and create multiple JSON files.
+
+See [Displaying captions](display-captions.md) for how to display the captions in Remotion.

package/vendor/skills/skills/remotion-best-practices/rules/transitions.md

@@ -0,0 +1,193 @@
+---
+name: transitions
+description: Scene transitions and overlays for Remotion using TransitionSeries.
+metadata:
+  tags: transitions, overlays, fade, slide, wipe, scenes
+---
+
+## TransitionSeries
+
+`<TransitionSeries>` arranges scenes and supports two ways to enhance the cut point between them:
+
+- **Transitions** (`<TransitionSeries.Transition>`) — crossfade, slide, wipe, etc. between two scenes. Shortens the timeline because both scenes play simultaneously during the transition.
+- **Overlays** (`<TransitionSeries.Overlay>`) — render an effect (e.g. a light leak) on top of the cut point without shortening the timeline.
+
+Children are absolutely positioned.
+
+## Prerequisites
+
+```bash
+npx remotion add @remotion/transitions
+```
+
+## Transition example
+
+```tsx
+import { TransitionSeries, linearTiming } from "@remotion/transitions";
+import { fade } from "@remotion/transitions/fade";
+
+<TransitionSeries>
+  <TransitionSeries.Sequence durationInFrames={60}>
+    <SceneA />
+  </TransitionSeries.Sequence>
+  <TransitionSeries.Transition
+    presentation={fade()}
+    timing={linearTiming({ durationInFrames: 15 })}
+  />
+  <TransitionSeries.Sequence durationInFrames={60}>
+    <SceneB />
+  </TransitionSeries.Sequence>
+</TransitionSeries>;
+```
+
+## Overlay example
+
+Any React component can be used as an overlay. For a ready-made effect, see the **light-leaks** rule.
+
+```tsx
+import { TransitionSeries } from "@remotion/transitions";
+import { LightLeak } from "@remotion/light-leaks";
+
+<TransitionSeries>
+  <TransitionSeries.Sequence durationInFrames={60}>
+    <SceneA />
+  </TransitionSeries.Sequence>
+  <TransitionSeries.Overlay durationInFrames={20}>
+    <LightLeak />
+  </TransitionSeries.Overlay>
+  <TransitionSeries.Sequence durationInFrames={60}>
+    <SceneB />
+  </TransitionSeries.Sequence>
+</TransitionSeries>;
+```
+
+## Mixing transitions and overlays
+
+Transitions and overlays can coexist in the same `<TransitionSeries>`, but an overlay cannot be adjacent to a transition or another overlay.
+
+```tsx
+import { TransitionSeries, linearTiming } from "@remotion/transitions";
+import { fade } from "@remotion/transitions/fade";
+import { LightLeak } from "@remotion/light-leaks";
+
+<TransitionSeries>
+  <TransitionSeries.Sequence durationInFrames={60}>
+    <SceneA />
+  </TransitionSeries.Sequence>
+  <TransitionSeries.Overlay durationInFrames={30}>
+    <LightLeak />
+  </TransitionSeries.Overlay>
+  <TransitionSeries.Sequence durationInFrames={60}>
+    <SceneB />
+  </TransitionSeries.Sequence>
+  <TransitionSeries.Transition
+    presentation={fade()}
+    timing={linearTiming({ durationInFrames: 15 })}
+  />
+  <TransitionSeries.Sequence durationInFrames={60}>
+    <SceneC />
+  </TransitionSeries.Sequence>
+</TransitionSeries>;
+```
+
+## Transition props
+
+`<TransitionSeries.Transition>` requires:
+
+- `presentation` — the visual effect (e.g. `fade()`, `slide()`, `wipe()`).
+- `timing` — controls speed and easing (e.g. `linearTiming()`, `springTiming()`).
+
+## Overlay props
+
+`<TransitionSeries.Overlay>` accepts:
+
+- `durationInFrames` — how long the overlay is visible (positive integer).
+- `offset?` — shifts the overlay relative to the cut point center. Positive = later, negative = earlier. Default: `0`.
+
+## Available transition types
+
+Import transitions from their respective modules:
+
+```tsx
+import { fade } from "@remotion/transitions/fade";
+import { slide } from "@remotion/transitions/slide";
+import { wipe } from "@remotion/transitions/wipe";
+import { flip } from "@remotion/transitions/flip";
+import { clockWipe } from "@remotion/transitions/clock-wipe";
+```
+
+## Slide transition with direction
+
+```tsx
+import { slide } from "@remotion/transitions/slide";
+
+<TransitionSeries.Transition
+  presentation={slide({ direction: "from-left" })}
+  timing={linearTiming({ durationInFrames: 20 })}
+/>;
+```
+
+Directions: `"from-left"`, `"from-right"`, `"from-top"`, `"from-bottom"`
+
+## Timing options
+
+```tsx
+import { linearTiming, springTiming } from "@remotion/transitions";
+
+// Linear timing - constant speed
+linearTiming({ durationInFrames: 20 });
+
+// Spring timing - organic motion
+springTiming({ config: { damping: 200 }, durationInFrames: 25 });
+```
+
+## Duration calculation
+
+Transitions overlap adjacent scenes, so the total composition length is **shorter** than the sum of all sequence durations. Overlays do **not** affect the total duration.
+
+For example, with two 60-frame sequences and a 15-frame transition:
+
+- Without transitions: `60 + 60 = 120` frames
+- With transition: `60 + 60 - 15 = 105` frames
+
+Adding an overlay between two other sequences does not change the total.
+
+### Getting the duration of a transition
+
+Use the `getDurationInFrames()` method on the timing object:
+
+```tsx
+import { linearTiming, springTiming } from "@remotion/transitions";
+
+const linearDuration = linearTiming({
+  durationInFrames: 20,
+}).getDurationInFrames({ fps: 30 });
+// Returns 20
+
+const springDuration = springTiming({
+  config: { damping: 200 },
+}).getDurationInFrames({ fps: 30 });
+// Returns calculated duration based on spring physics
+```
+
+For `springTiming` without an explicit `durationInFrames`, the duration depends on `fps` because it calculates when the spring animation settles.
+
+### Calculating total composition duration
+
+```tsx
+import { linearTiming } from "@remotion/transitions";
+
+const scene1Duration = 60;
+const scene2Duration = 60;
+const scene3Duration = 60;
+
+const timing1 = linearTiming({ durationInFrames: 15 });
+const timing2 = linearTiming({ durationInFrames: 20 });
+
+const transition1Duration = timing1.getDurationInFrames({ fps: 30 });
+const transition2Duration = timing2.getDurationInFrames({ fps: 30 });
+
+const totalDuration =
+  scene1Duration + scene2Duration + scene3Duration - transition1Duration - transition2Duration;
+// 60 + 60 + 60 - 15 - 20 = 145 frames
+```