dep 1.0.0 → 1.1.0

package/node_modules/tar/README.md

@@ -1,1224 +0,0 @@
-# node-tar
-
-Fast and full-featured Tar for Node.js
-
-The API is designed to mimic the behavior of `tar(1)` on unix systems.
-If you are familiar with how tar works, most of this will hopefully be
-straightforward for you. If not, then hopefully this module can teach
-you useful unix skills that may come in handy someday :)
-
-## Security Information
-
-Significant efforts have been taken to harden this library
-against a wide variety of filesystem based attacks, especially as
-it is used to unpack packages that are published by unknown
-agents to [the npm registry](https://npmjs.com/).
-
-A brief overview of some of the hardening that has gone into this
-implementation. (Note that most of these are disabled if
-`preservePaths: true` is set in the options.)
-
-- Paths that attempt to walk up outside of the extraction target
-  are ignored, and a warning is raised.
-- `Link` and `SymbolicLink` entries are not allowed to target
-  locations outside of the extraction folder.
-- Extraction is not allowed through a symbolic link that appears
-  within the extraction target.
-- Absolute paths are turned into relative paths underneath the
-  extraction target.
-- Character Device, Block Device, and FIFO entries are never
-  extracted.
-- File and directory ownership is not mutated unless `forceChown`
-  is set, or the extraction is run as root.
-- File and directory modes in the archive are ignored, unless
-  the `chmod: true` option is set.
-- A path-reservation system is used to ensure that even when
-  multiple entries are being extracted in parallel, subsequent
-  entries with the same filename will not interfere with one
-  another (for example, exchanging a file with a symbolic link
-  while it is being written to).
-- Unicode characters in path names are fully normalized, to
-  prevent evading these protections with unicode equivalences.
-
-It is frankly unlikely that any tar implementation in JavaScript
-is going to be as secure as this one, unless a similar amount of
-work is put into it, putting it to the test over many years of
-intensive use and scrutiny. You can vibe-code a tar extractor in
-an afternoon, but you'll regret it.
-
-> [!WARNING]
->
-> **However**, all that being said, _care must still be taken_
-> when dealing with data from unknown sources, especially when
-> extracting files, with this or any library, no matter how
-> hardened it may be. It is _your_ responsibility to use this
-> library safely.
-
-1. **NEVER** extract tarball data into a folder that could be
-   potentially controlled by an unknown actor. A clever attacker
-   can swap out the target of an extracted file with a symbolic
-   link to some location of their choosing, resulting in writing
-   files outside the target folder. There is no reasonable way to
-   harden against this category of attack, and security reports
-   about it will be closed.
-   [TOCTOU](https://cwe.mitre.org/data/definitions/367.html)
-   exposure is unavoidable when creating files based on entries
-   in an archive file.
-2. If you are unpacking tarballs that may come from an unknown
-   source, it is **highly recommended** that you use a filter
-   function that rejects all hardlinks and symbolic links. Link
-   files are historically the root of nearly every file
-   extraction vulnerability. (npm filters links out of package
-   artifacts for this reason.)
-3. If you are extracting tarballs that are compressed (eg, with
-   gzip, brotli, or zstd), then it is a very good idea to also
-   filter out any files that are excessively large. Even if you
-   are restricting the size of the archive file itself, an
-   excessively large file of repetitive data can compress down
-   very small, and extract to take up a lot of disk space.
-4. **Stay up to date.** Old versions of tar are not maintained or
-   tested for newly discovered security advisories, and should be
-   assumed to contain every known security vulnerability, and
-   many that are unknown.
-
-If you find a security vulnerability in node-tar, where it is not
-properly enforcing the intended security protections, then please
-report it using the GitHub Security Advisories system, where it
-will be triaged and corrected if possible.
-
-## Background
-
-A "tar file" or "tarball" is an archive of file system entries
-(directories, files, links, etc.) The name comes from "tape archive".
-If you run `man tar` on almost any Unix command line, you'll learn
-quite a bit about what it can do, and its history.
-
-Tar has 5 main top-level commands:
-
-- `c` Create an archive
-- `r` Replace entries within an archive
-- `u` Update entries within an archive (ie, replace if they're newer)
-- `t` List out the contents of an archive
-- `x` Extract an archive to disk
-
-The other flags and options modify how this top level function works.
-
-## High-Level API
-
-These 5 functions are the high-level API. All of them have a
-single-character name (for unix nerds familiar with `tar(1)`) as well
-as a long name (for everyone else).
-
-All the high-level functions take the following arguments, all three
-of which are optional and may be omitted.
-
-1. `options` - An optional object specifying various options
-2. `paths` - An array of paths to add or extract
-3. `callback` - Called when the command is completed, if async. (If
-   sync or no file specified, providing a callback throws a
-   `TypeError`.)
-
-If the command is sync (ie, if `options.sync=true`), then the
-callback is not allowed, since the action will be completed immediately.
-
-If a `file` argument is specified, and the command is async, then a
-`Promise` is returned. In this case, if async, a callback may be
-provided which is called when the command is completed.
-
-If a `file` option is not specified, then a stream is returned. For
-`create`, this is a readable stream of the generated archive. For
-`list` and `extract` this is a writable stream that an archive should
-be written into. If a file is not specified, then a callback is not
-allowed, because you're already getting a stream to work with.
-
-`replace` and `update` only work on existing archives, and so require
-a `file` argument.
-
-Sync commands without a file argument return a stream that acts on its
-input immediately in the same tick. For readable streams, this means
-that all of the data is immediately available by calling
-`stream.read()`. For writable streams, it will be acted upon as soon
-as it is provided, but this can be at any time.
-
-### Warnings and Errors
-
-Tar emits warnings and errors for recoverable and unrecoverable situations,
-respectively. In many cases, a warning only affects a single entry in an
-archive, or is simply informing you that it's modifying an entry to comply
-with the settings provided.
-
-Unrecoverable warnings will always raise an error (ie, emit `'error'` on
-streaming actions, throw for non-streaming sync actions, reject the
-returned Promise for non-streaming async operations, or call a provided
-callback with an `Error` as the first argument). Recoverable errors will
-raise an error only if `strict: true` is set in the options.
-
-Respond to (recoverable) warnings by listening to the `warn` event.
-Handlers receive 3 arguments:
-
-- `code` String. One of the error codes below. This may not match
-  `data.code`, which preserves the original error code from fs and zlib.
-- `message` String. More details about the error.
-- `data` Metadata about the error. An `Error` object for errors raised by
-  fs and zlib. All fields are attached to errors raisd by tar. Typically
-  contains the following fields, as relevant:
-  - `tarCode` The tar error code.
-  - `code` Either the tar error code, or the error code set by the
-    underlying system.
-  - `file` The archive file being read or written.
-  - `cwd` Working directory for creation and extraction operations.
-  - `entry` The entry object (if it could be created) for `TAR_ENTRY_INFO`,
-    `TAR_ENTRY_INVALID`, and `TAR_ENTRY_ERROR` warnings.
-  - `header` The header object (if it could be created, and the entry could
-    not be created) for `TAR_ENTRY_INFO` and `TAR_ENTRY_INVALID` warnings.
-  - `recoverable` Boolean. If `false`, then the warning will emit an
-    `error`, even in non-strict mode.
-
-#### Error Codes
-
-- `TAR_ENTRY_INFO` An informative error indicating that an entry is being
-  modified, but otherwise processed normally. For example, removing `/` or
-  `C:\` from absolute paths if `preservePaths` is not set.
-
-- `TAR_ENTRY_INVALID` An indication that a given entry is not a valid tar
-  archive entry, and will be skipped. This occurs when:
-  - a checksum fails,
-  - a `linkpath` is missing for a link type, or
-  - a `linkpath` is provided for a non-link type.
-
-  If every entry in a parsed archive raises an `TAR_ENTRY_INVALID` error,
-  then the archive is presumed to be unrecoverably broken, and
-  `TAR_BAD_ARCHIVE` will be raised.
-
-- `TAR_ENTRY_ERROR` The entry appears to be a valid tar archive entry, but
-  encountered an error which prevented it from being unpacked. This occurs
-  when:
-  - an unrecoverable fs error happens during unpacking,
-  - an entry is trying to extract into an excessively deep
-    location (by default, limited to 1024 subfolders),
-  - an entry has `..` in the path and `preservePaths` is not set, or
-  - an entry is extracting through a symbolic link, when `preservePaths` is
-    not set.
-
-- `TAR_ENTRY_UNSUPPORTED` An indication that a given entry is
-  a valid archive entry, but of a type that is unsupported, and so will be
-  skipped in archive creation or extracting.
-
-- `TAR_ABORT` When parsing gzipped-encoded archives, the parser will
-  abort the parse process raise a warning for any zlib errors encountered.
-  Aborts are considered unrecoverable for both parsing and unpacking.
-
-- `TAR_BAD_ARCHIVE` The archive file is totally hosed. This can happen for
-  a number of reasons, and always occurs at the end of a parse or extract:
-  - An entry body was truncated before seeing the full number of bytes.
-  - The archive contained only invalid entries, indicating that it is
-    likely not an archive, or at least, not an archive this library can
-    parse.
-
-  `TAR_BAD_ARCHIVE` is considered informative for parse operations, but
-  unrecoverable for extraction. Note that, if encountered at the end of an
-  extraction, tar WILL still have extracted as much it could from the
-  archive, so there may be some garbage files to clean up.
-
-Errors that occur deeper in the system (ie, either the filesystem or zlib)
-will have their error codes left intact, and a `tarCode` matching one of
-the above will be added to the warning metadata or the raised error object.
-
-Errors generated by tar will have one of the above codes set as the
-`error.code` field as well, but since errors originating in zlib or fs will
-have their original codes, it's better to read `error.tarCode` if you wish
-to see how tar is handling the issue.
-
-### Examples
-
-The API mimics the `tar(1)` command line functionality, with aliases
-for more human-readable option and function names. The goal is that
-if you know how to use `tar(1)` in Unix, then you know how to use
-`import('tar')` in JavaScript.
-
-To replicate `tar czf my-tarball.tgz files and folders`, you'd do:
-
-```js
-import { create } from 'tar'
-create(
-  {
-    gzip: <true|gzip options>,
-    file: 'my-tarball.tgz'
-  },
-  ['some', 'files', 'and', 'folders']
-).then(_ => { .. tarball has been created .. })
-```
-
-To replicate `tar cz files and folders > my-tarball.tgz`, you'd do:
-
-```js
-// if you're familiar with the tar(1) cli flags, this can be nice
-import * as tar from 'tar'
-tar.c(
-  {
-    // 'z' is alias for 'gzip' option
-    z: <true|gzip options>
-  },
-  ['some', 'files', 'and', 'folders']
-).pipe(fs.createWriteStream('my-tarball.tgz'))
-```
-
-To replicate `tar xf my-tarball.tgz` you'd do:
-
-```js
-tar.x( // or `tar.extract`
-  {
-    // or `file:`
-    f: 'my-tarball.tgz'
-  }
-).then(_=> { .. tarball has been dumped in cwd .. })
-```
-
-To replicate `cat my-tarball.tgz | tar x -C some-dir --strip=1`:
-
-```js
-fs.createReadStream('my-tarball.tgz').pipe(
-  tar.x({
-    strip: 1,
-    C: 'some-dir', // alias for cwd:'some-dir', also ok
-  }),
-)
-```
-
-To replicate `tar tf my-tarball.tgz`, do this:
-
-```js
-tar.t({
-  file: 'my-tarball.tgz',
-  onReadEntry: entry => { .. do whatever with it .. }
-})
-```
-
-For example, to just get the list of filenames from an archive:
-
-```js
-const getEntryFilenames = async tarballFilename => {
-  const filenames = []
-  await tar.t({
-    file: tarballFilename,
-    onReadEntry: entry => filenames.push(entry.path),
-  })
-  return filenames
-}
-```
-
-To replicate `cat my-tarball.tgz | tar t` do:
-
-```js
-fs.createReadStream('my-tarball.tgz')
-  .pipe(tar.t())
-  .on('entry', entry => { .. do whatever with it .. })
-```
-
-To do anything synchronous, add `sync: true` to the options. Note
-that sync functions don't take a callback and don't return a promise.
-When the function returns, it's already done. Sync methods without a
-file argument return a sync stream, which flushes immediately. But,
-of course, it still won't be done until you `.end()` it.
-
-```js
-const getEntryFilenamesSync = tarballFilename => {
-  const filenames = []
-  tar.t({
-    file: tarballFilename,
-    onReadEntry: entry => filenames.push(entry.path),
-    sync: true,
-  })
-  return filenames
-}
-```
-
-To filter entries, add `filter: <function>` to the options.
-Tar-creating methods call the filter with `filter(path, stat)`.
-Tar-reading methods (including extraction) call the filter with
-`filter(path, entry)`. The filter is called in the `this`-context of
-the `Pack` or `Unpack` stream object.
-
-The arguments list to `tar t` and `tar x` specify a list of filenames
-to extract or list, so they're equivalent to a filter that tests if
-the file is in the list.
-
-For those who _aren't_ fans of tar's single-character command names:
-
-```
-tar.c === tar.create
-tar.r === tar.replace (appends to archive, file is required)
-tar.u === tar.update (appends if newer, file is required)
-tar.x === tar.extract
-tar.t === tar.list
-```
-
-Keep reading for all the command descriptions and options, as well as
-the low-level API that they are built on.
-
-### tar.c(options, fileList, callback) [alias: tar.create]
-
-Create a tarball archive.
-
-The `fileList` is an array of paths to add to the tarball. Adding a
-directory also adds its children recursively.
-
-An entry in `fileList` that starts with an `@` symbol is a tar archive
-whose entries will be added. To add a file that starts with `@`,
-prepend it with `./`.
-
-The following options are supported:
-
-- `file` Write the tarball archive to the specified filename. If this
-  is specified, then the callback will be fired when the file has been
-  written, and a promise will be returned that resolves when the file
-  is written. If a filename is not specified, then a Readable Stream
-  will be returned which will emit the file data. [Alias: `f`]
-- `sync` Act synchronously. If this is set, then any provided file
-  will be fully written after the call to `tar.c`. If this is set,
-  and a file is not provided, then the resulting stream will already
-  have the data ready to `read` or `emit('data')` as soon as you
-  request it.
-- `onwarn` A function that will get called with `(code, message, data)` for
-  any warnings encountered. (See "Warnings and Errors")
-- `strict` Treat warnings as crash-worthy errors. Default false.
-- `cwd` The current working directory for creating the archive.
-  Defaults to `process.cwd()`. [Alias: `C`]
-- `prefix` A path portion to prefix onto the entries in the archive.
-- `gzip` Set to any truthy value to create a gzipped archive, or an
-  object with settings for `zlib.Gzip()` [Alias: `z`]
-- `filter` A function that gets called with `(path, stat)` for each
-  entry being added. Return `true` to add the entry to the archive,
-  or `false` to omit it.
-- `portable` Omit metadata that is system-specific: `ctime`, `atime`,
-  `uid`, `gid`, `uname`, `gname`, `dev`, `ino`, and `nlink`. Note
-  that `mtime` is still included, because this is necessary for other
-  time-based operations. Additionally, `mode` is set to a "reasonable
-  default" for most unix systems, based on a `umask` value of `0o22`.
-- `preservePaths` Allow absolute paths. By default, `/` is stripped
-  from absolute paths. [Alias: `P`]
-- `mode` The mode to set on the created file archive
-- `noDirRecurse` Do not recursively archive the contents of
-  directories. [Alias: `n`]
-- `follow` Set to true to pack the targets of symbolic links. Without
-  this option, symbolic links are archived as such. [Alias: `L`, `h`]
-- `noPax` Suppress pax extended headers. Note that this means that
-  long paths and linkpaths will be truncated, and large or negative
-  numeric values may be interpreted incorrectly.
-- `noMtime` Set to true to omit writing `mtime` values for entries.
-  Note that this prevents using other mtime-based features like
-  `tar.update` or the `keepNewer` option with the resulting tar archive.
-  [Alias: `m`, `no-mtime`]
-- `mtime` Set to a `Date` object to force a specific `mtime` for
-  everything added to the archive. Overridden by `noMtime`.
-- `onWriteEntry` Called with each `WriteEntry` or
-  `WriteEntrySync` that is created in the course of writing the
-  archive.
-
-The following options are mostly internal, but can be modified in some
-advanced use cases, such as re-using caches between runs.
-
-- `linkCache` A Map object containing the device and inode value for
-  any file whose nlink is > 1, to identify hard links.
-- `statCache` A Map object that caches calls `lstat`.
-- `readdirCache` A Map object that caches calls to `readdir`.
-- `jobs` A number specifying how many concurrent jobs to run.
-  Defaults to 4.
-- `maxReadSize` The maximum buffer size for `fs.read()` operations.
-  Defaults to 16 MB.
-
-#### Using `onWriteEntry` to alter entries
-
-The `onWriteEntry` function, if provided, will get a reference
-to each `entry` object on its way into the archive.
-
-If any fields on this entry are changed, then these changes will
-be reflected in the entry that is written to the archive.
-
-The return value of the function is ignored. All that matters is
-the final state of the entry object. This can also be used to
-track the files added to an archive, for example.
-
-```js
-import * as tar from 'tar'
-const filesAdded = []
-tar.c(
-  {
-    sync: true,
-    file: 'lowercase-executable.tar',
-    onWriteEntry(entry) {
-      // initially, it's uppercase and 0o644
-      console.log('adding', entry.path, entry.stat.mode.toString(8))
-      // make all the paths lowercase
-      entry.path = entry.path.toLowerCase()
-      // make the entry executable
-      entry.stat.mode = 0o755
-      // in the archive, it's lowercase and 0o755
-      filesAdded.push([entry.path, entry.stat.mode.toString(8)])
-    },
-  },
-  ['./bin'],
-)
-console.log('added', filesAdded)
-```
-
-Then, if the `./bin` directory contained `SOME-BIN`, it would
-show up in the archive as:
-
-```
-$ node create-lowercase-executable.js
-adding ./bin/SOME-BIN 644
-added [[ './bin/some-bin', '755' ]]
-
-$ tar cvf lowercase-executable.tar
--rwxr-xr-x  0 isaacs 20      47731 Aug 14 08:56 ./bin/some-bin
-```
-
-with a lowercase name and a mode of `0o755`.
-
-### tar.x(options, fileList, callback) [alias: tar.extract]
-
-Extract a tarball archive.
-
-The `fileList` is an array of paths to extract from the tarball. If
-no paths are provided, then all the entries are extracted.
-
-If the archive is gzipped, then tar will detect this and unzip it.
-
-Note that all directories that are created will be forced to be
-writable, readable, and listable by their owner, to avoid cases where
-a directory prevents extraction of child entries by virtue of its
-mode.
-
-Most extraction errors will cause a `warn` event to be emitted. If
-the `cwd` is missing, or not a directory, then the extraction will
-fail completely.
-
-The following options are supported:
-
-- `cwd` Extract files relative to the specified directory. Defaults
-  to `process.cwd()`. If provided, this must exist and must be a
-  directory. [Alias: `C`]
-- `file` The archive file to extract. If not specified, then a
-  Writable stream is returned where the archive data should be
-  written. [Alias: `f`]
-- `sync` Create files and directories synchronously.
-- `strict` Treat warnings as crash-worthy errors. Default false.
-- `filter` A function that gets called with `(path, entry)` for each
-  entry being unpacked. Return `true` to unpack the entry from the
-  archive, or `false` to skip it.
-- `newer` Set to true to keep the existing file on disk if it's newer
-  than the file in the archive. [Alias: `keep-newer`,
-  `keep-newer-files`]
-- `keep` Do not overwrite existing files. In particular, if a file
-  appears more than once in an archive, later copies will not
-  overwrite earlier copies. [Alias: `k`, `keep-existing`]
-- `preservePaths` Allow absolute paths, paths containing `..`, and
-  extracting through symbolic links. By default, `/` is stripped from
-  absolute paths, `..` paths are not extracted, and any file whose
-  location would be modified by a symbolic link is not extracted.
-  [Alias: `P`]
-- `unlink` Unlink files before creating them. Without this option,
-  tar overwrites existing files, which preserves existing hardlinks.
-  With this option, existing hardlinks will be broken, as will any
-  symlink that would affect the location of an extracted file. [Alias:
-  `U`]
-- `strip` Remove the specified number of leading path elements.
-  Pathnames with fewer elements will be silently skipped. Note that
-  the pathname is edited after applying the filter, but before
-  security checks. [Alias: `strip-components`, `stripComponents`]
-- `preserveOwner` If true, tar will set the `uid` and `gid` of
-  extracted entries to the `uid` and `gid` fields in the archive.
-  This defaults to true when run as root, and false otherwise. If
-  false, then files and directories will be set with the owner and
-  group of the user running the process. This is similar to `-p` in
-  `tar(1)`, but ACLs and other system-specific data is never unpacked
-  in this implementation, and modes are set by default already.
-  [Alias: `p`]
-- `uid` Set to a number to force ownership of all extracted files and
-  folders, and all implicitly created directories, to be owned by the
-  specified user id, regardless of the `uid` field in the archive.
-  Cannot be used along with `preserveOwner`. Requires also setting a
-  `gid` option.
-- `gid` Set to a number to force ownership of all extracted files and
-  folders, and all implicitly created directories, to be owned by the
-  specified group id, regardless of the `gid` field in the archive.
-  Cannot be used along with `preserveOwner`. Requires also setting a
-  `uid` option.
-- `noMtime` Set to true to omit writing `mtime` value for extracted
-  entries. [Alias: `m`, `no-mtime`]
-- `transform` Provide a function that takes an `entry` object, and
-  returns a stream, or any falsey value. If a stream is provided,
-  then that stream's data will be written instead of the contents of
-  the archive entry. If a falsey value is provided, then the entry is
-  written to disk as normal. (To exclude items from extraction, use
-  the `filter` option described above.)
-- `onReadEntry` A function that gets called with `(entry)` for each entry
-  that passes the filter.
-- `onwarn` A function that will get called with `(code, message, data)` for
-  any warnings encountered. (See "Warnings and Errors")
-- `chmod` Set to true to call `fs.chmod()` to ensure that the
-  extracted file matches the entry mode. This may necessitate a
-  call to the deprecated and thread-unsafe `process.umask()`
-  method to determine the default umask value, unless a
-  `processUmask` options is also provided. Otherwise tar will
-  extract with whatever mode is provided, and let the process
-  `umask` apply normally.
-- `processUmask` Set to an explicit numeric value to avoid
-  calling `process.umask()` when `chmod: true` is set.
-- `maxDepth` The maximum depth of subfolders to extract into. This
-  defaults to 1024. Anything deeper than the limit will raise a
-  warning and skip the entry. Set to `Infinity` to remove the
-  limitation.
-
-The following options are mostly internal, but can be modified in some
-advanced use cases, such as re-using caches between runs.
-
-- `maxReadSize` The maximum buffer size for `fs.read()` operations.
-  Defaults to 16 MB.
-- `umask` Filter the modes of entries like `process.umask()`.
-- `dmode` Default mode for directories
-- `fmode` Default mode for files
-- `maxMetaEntrySize` The maximum size of meta entries that is
-  supported. Defaults to 1 MB.
-
-Note that using an asynchronous stream type with the `transform`
-option will cause undefined behavior in sync extractions.
-[MiniPass](http://npm.im/minipass)-based streams are designed for this
-use case.
-
-### tar.t(options, fileList, callback) [alias: tar.list]
-
-List the contents of a tarball archive.
-
-The `fileList` is an array of paths to list from the tarball. If
-no paths are provided, then all the entries are listed.
-
-If the archive is gzipped, then tar will detect this and unzip it.
-
-If the `file` option is _not_ provided, then returns an event emitter that
-emits `entry` events with `tar.ReadEntry` objects. However, they don't
-emit `'data'` or `'end'` events. (If you want to get actual readable
-entries, use the `tar.Parser` class instead.)
-
-If a `file` option _is_ provided, then the return value will be a promise
-that resolves when the file has been fully traversed in async mode, or
-`undefined` if `sync: true` is set. Thus, you _must_ specify an `onReadEntry`
-method in order to do anything useful with the data it parses.
-
-The following options are supported:
-
-- `file` The archive file to list. If not specified, then a
-  Writable stream is returned where the archive data should be
-  written. [Alias: `f`]
-- `sync` Read the specified file synchronously. (This has no effect
-  when a file option isn't specified, because entries are emitted as
-  fast as they are parsed from the stream anyway.)
-- `strict` Treat warnings as crash-worthy errors. Default false.
-- `filter` A function that gets called with `(path, entry)` for each
-  entry being listed. Return `true` to emit the entry from the
-  archive, or `false` to skip it.
-- `onReadEntry` A function that gets called with `(entry)` for each entry
-  that passes the filter. This is important for when `file` is set,
-  because there is no other way to do anything useful with this method.
-- `maxReadSize` The maximum buffer size for `fs.read()` operations.
-  Defaults to 16 MB.
-- `noResume` By default, `entry` streams are resumed immediately after
-  the call to `onReadEntry`. Set `noResume: true` to suppress this
-  behavior. Note that by opting into this, the stream will never
-  complete until the entry data is consumed.
-- `onwarn` A function that will get called with `(code, message, data)` for
-  any warnings encountered. (See "Warnings and Errors")
-
-### tar.u(options, fileList, callback) [alias: tar.update]
-
-Add files to an archive if they are newer than the entry already in
-the tarball archive.
-
-The `fileList` is an array of paths to add to the tarball. Adding a
-directory also adds its children recursively.
-
-An entry in `fileList` that starts with an `@` symbol is a tar archive
-whose entries will be added. To add a file that starts with `@`,
-prepend it with `./`.
-
-The following options are supported:
-
-- `file` Required. Write the tarball archive to the specified
-  filename. [Alias: `f`]
-- `sync` Act synchronously. If this is set, then any provided file
-  will be fully written after the call to `tar.c`.
-- `onwarn` A function that will get called with `(code, message, data)` for
-  any warnings encountered. (See "Warnings and Errors")
-- `strict` Treat warnings as crash-worthy errors. Default false.
-- `cwd` The current working directory for adding entries to the
-  archive. Defaults to `process.cwd()`. [Alias: `C`]
-- `prefix` A path portion to prefix onto the entries in the archive.
-- `gzip` Set to any truthy value to create a gzipped archive, or an
-  object with settings for `zlib.Gzip()` [Alias: `z`]
-- `filter` A function that gets called with `(path, stat)` for each
-  entry being added. Return `true` to add the entry to the archive,
-  or `false` to omit it.
-- `portable` Omit metadata that is system-specific: `ctime`, `atime`,
-  `uid`, `gid`, `uname`, `gname`, `dev`, `ino`, and `nlink`. Note
-  that `mtime` is still included, because this is necessary for other
-  time-based operations. Additionally, `mode` is set to a "reasonable
-  default" for most unix systems, based on a `umask` value of `0o22`.
-- `preservePaths` Allow absolute paths. By default, `/` is stripped
-  from absolute paths. [Alias: `P`]
-- `maxReadSize` The maximum buffer size for `fs.read()` operations.
-  Defaults to 16 MB.
-- `noDirRecurse` Do not recursively archive the contents of
-  directories. [Alias: `n`]
-- `follow` Set to true to pack the targets of symbolic links. Without
-  this option, symbolic links are archived as such. [Alias: `L`, `h`]
-- `noPax` Suppress pax extended headers. Note that this means that
-  long paths and linkpaths will be truncated, and large or negative
-  numeric values may be interpreted incorrectly.
-- `noMtime` Set to true to omit writing `mtime` values for entries.
-  Note that this prevents using other mtime-based features like
-  `tar.update` or the `keepNewer` option with the resulting tar archive.
-  [Alias: `m`, `no-mtime`]
-- `mtime` Set to a `Date` object to force a specific `mtime` for
-  everything added to the archive. Overridden by `noMtime`.
-- `onWriteEntry` Called with each `WriteEntry` or
-  `WriteEntrySync` that is created in the course of writing the
-  archive.
-
-### tar.r(options, fileList, callback) [alias: tar.replace]
-
-Add files to an existing archive. Because later entries override
-earlier entries, this effectively replaces any existing entries.
-
-The `fileList` is an array of paths to add to the tarball. Adding a
-directory also adds its children recursively.
-
-An entry in `fileList` that starts with an `@` symbol is a tar archive
-whose entries will be added. To add a file that starts with `@`,
-prepend it with `./`.
-
-The following options are supported:
-
-- `file` Required. Write the tarball archive to the specified
-  filename. [Alias: `f`]
-- `sync` Act synchronously. If this is set, then any provided file
-  will be fully written after the call to `tar.c`.
-- `onwarn` A function that will get called with `(code, message, data)` for
-  any warnings encountered. (See "Warnings and Errors")
-- `strict` Treat warnings as crash-worthy errors. Default false.
-- `cwd` The current working directory for adding entries to the
-  archive. Defaults to `process.cwd()`. [Alias: `C`]
-- `prefix` A path portion to prefix onto the entries in the archive.
-- `gzip` Set to any truthy value to create a gzipped archive, or an
-  object with settings for `zlib.Gzip()` [Alias: `z`]
-- `filter` A function that gets called with `(path, stat)` for each
-  entry being added. Return `true` to add the entry to the archive,
-  or `false` to omit it.
-- `portable` Omit metadata that is system-specific: `ctime`, `atime`,
-  `uid`, `gid`, `uname`, `gname`, `dev`, `ino`, and `nlink`. Note
-  that `mtime` is still included, because this is necessary for other
-  time-based operations. Additionally, `mode` is set to a "reasonable
-  default" for most unix systems, based on a `umask` value of `0o22`.
-- `preservePaths` Allow absolute paths. By default, `/` is stripped
-  from absolute paths. [Alias: `P`]
-- `maxReadSize` The maximum buffer size for `fs.read()` operations.
-  Defaults to 16 MB.
-- `noDirRecurse` Do not recursively archive the contents of
-  directories. [Alias: `n`]
-- `follow` Set to true to pack the targets of symbolic links. Without
-  this option, symbolic links are archived as such. [Alias: `L`, `h`]
-- `noPax` Suppress pax extended headers. Note that this means that
-  long paths and linkpaths will be truncated, and large or negative
-  numeric values may be interpreted incorrectly.
-- `noMtime` Set to true to omit writing `mtime` values for entries.
-  Note that this prevents using other mtime-based features like
-  `tar.update` or the `keepNewer` option with the resulting tar archive.
-  [Alias: `m`, `no-mtime`]
-- `mtime` Set to a `Date` object to force a specific `mtime` for
-  everything added to the archive. Overridden by `noMtime`.
-- `onWriteEntry` Called with each `WriteEntry` or
-  `WriteEntrySync` that is created in the course of writing the
-  archive.
-
-## Low-Level API
-
-### class Pack
-
-A readable tar stream.
-
-Has all the standard readable stream interface stuff. `'data'` and
-`'end'` events, `read()` method, `pause()` and `resume()`, etc.
-
-#### constructor(options)
-
-The following options are supported:
-
-- `onwarn` A function that will get called with `(code, message, data)` for
-  any warnings encountered. (See "Warnings and Errors")
-- `strict` Treat warnings as crash-worthy errors. Default false.
-- `cwd` The current working directory for creating the archive.
-  Defaults to `process.cwd()`.
-- `prefix` A path portion to prefix onto the entries in the archive.
-- `gzip` Set to any truthy value to create a gzipped archive, or an
-  object with settings for `zlib.Gzip()`
-- `filter` A function that gets called with `(path, stat)` for each
-  entry being added. Return `true` to add the entry to the archive,
-  or `false` to omit it.
-- `portable` Omit metadata that is system-specific: `ctime`, `atime`,
-  `uid`, `gid`, `uname`, `gname`, `dev`, `ino`, and `nlink`. Note
-  that `mtime` is still included, because this is necessary for other
-  time-based operations. Additionally, `mode` is set to a "reasonable
-  default" for most unix systems, based on a `umask` value of `0o22`.
-- `preservePaths` Allow absolute paths. By default, `/` is stripped
-  from absolute paths.
-- `linkCache` A Map object containing the device and inode value for
-  any file whose nlink is > 1, to identify hard links.
-- `statCache` A Map object that caches calls `lstat`.
-- `readdirCache` A Map object that caches calls to `readdir`.
-- `jobs` A number specifying how many concurrent jobs to run.
-  Defaults to 4.
-- `maxReadSize` The maximum buffer size for `fs.read()` operations.
-  Defaults to 16 MB.
-- `noDirRecurse` Do not recursively archive the contents of
-  directories.
-- `follow` Set to true to pack the targets of symbolic links. Without
-  this option, symbolic links are archived as such.
-- `noPax` Suppress pax extended headers. Note that this means that
-  long paths and linkpaths will be truncated, and large or negative
-  numeric values may be interpreted incorrectly.
-- `noMtime` Set to true to omit writing `mtime` values for entries.
-  Note that this prevents using other mtime-based features like
-  `tar.update` or the `keepNewer` option with the resulting tar archive.
-- `mtime` Set to a `Date` object to force a specific `mtime` for
-  everything added to the archive. Overridden by `noMtime`.
-- `onWriteEntry` Called with each `WriteEntry` or
-  `WriteEntrySync` that is created in the course of writing the
-  archive.
-
-#### add(path)
-
-Adds an entry to the archive. Returns the Pack stream.
-
-#### write(path)
-
-Adds an entry to the archive. Returns true if flushed.
-
-#### end()
-
-Finishes the archive.
-
-### class PackSync
-
-Synchronous version of `Pack`.
-
-### class Unpack
-
-A writable stream that unpacks a tar archive onto the file system.
-
-All the normal writable stream stuff is supported. `write()` and
-`end()` methods, `'drain'` events, etc.
-
-Note that all directories that are created will be forced to be
-writable, readable, and listable by their owner, to avoid cases where
-a directory prevents extraction of child entries by virtue of its
-mode.
-
-`'close'` is emitted when it's done writing stuff to the file system.
-
-Most unpack errors will cause a `warn` event to be emitted. If the
-`cwd` is missing, or not a directory, then an error will be emitted.
-
-#### constructor(options)
-
-- `cwd` Extract files relative to the specified directory. Defaults
-  to `process.cwd()`. If provided, this must exist and must be a
-  directory.
-- `filter` A function that gets called with `(path, entry)` for each
-  entry being unpacked. Return `true` to unpack the entry from the
-  archive, or `false` to skip it.
-- `newer` Set to true to keep the existing file on disk if it's newer
-  than the file in the archive.
-- `keep` Do not overwrite existing files. In particular, if a file
-  appears more than once in an archive, later copies will not
-  overwrite earlier copies.
-- `preservePaths` Allow absolute paths, paths containing `..`, and
-  extracting through symbolic links. By default, `/` is stripped from
-  absolute paths, `..` paths are not extracted, and any file whose
-  location would be modified by a symbolic link is not extracted.
-- `unlink` Unlink files before creating them. Without this option,
-  tar overwrites existing files, which preserves existing hardlinks.
-  With this option, existing hardlinks will be broken, as will any
-  symlink that would affect the location of an extracted file.
-- `strip` Remove the specified number of leading path elements.
-  Pathnames with fewer elements will be silently skipped. Note that
-  the pathname is edited after applying the filter, but before
-  security checks.
-- `umask` Filter the modes of entries like `process.umask()`.
-- `dmode` Default mode for directories
-- `fmode` Default mode for files
-- `maxMetaEntrySize` The maximum size of meta entries that is
-  supported. Defaults to 1 MB.
-- `preserveOwner` If true, tar will set the `uid` and `gid` of
-  extracted entries to the `uid` and `gid` fields in the archive.
-  This defaults to true when run as root, and false otherwise. If
-  false, then files and directories will be set with the owner and
-  group of the user running the process. This is similar to `-p` in
-  `tar(1)`, but ACLs and other system-specific data is never unpacked
-  in this implementation, and modes are set by default already.
-- `win32` True if on a windows platform. Causes behavior where
-  filenames containing `<|>?` chars are converted to
-  windows-compatible values while being unpacked.
-- `uid` Set to a number to force ownership of all extracted files and
-  folders, and all implicitly created directories, to be owned by the
-  specified user id, regardless of the `uid` field in the archive.
-  Cannot be used along with `preserveOwner`. Requires also setting a
-  `gid` option.
-- `gid` Set to a number to force ownership of all extracted files and
-  folders, and all implicitly created directories, to be owned by the
-  specified group id, regardless of the `gid` field in the archive.
-  Cannot be used along with `preserveOwner`. Requires also setting a
-  `uid` option.
-- `noMtime` Set to true to omit writing `mtime` value for extracted
-  entries.
-- `transform` Provide a function that takes an `entry` object, and
-  returns a stream, or any falsey value. If a stream is provided,
-  then that stream's data will be written instead of the contents of
-  the archive entry. If a falsey value is provided, then the entry is
-  written to disk as normal. (To exclude items from extraction, use
-  the `filter` option described above.)
-- `strict` Treat warnings as crash-worthy errors. Default false.
-- `onReadEntry` A function that gets called with `(entry)` for each entry
-  that passes the filter.
-- `onwarn` A function that will get called with `(code, message, data)` for
-  any warnings encountered. (See "Warnings and Errors")
-- `chmod` Set to true to call `fs.chmod()` to ensure that the
-  extracted file matches the entry mode. This may necessitate a
-  call to the deprecated and thread-unsafe `process.umask()`
-  method to determine the default umask value, unless a
-  `processUmask` options is also provided. Otherwise tar will
-  extract with whatever mode is provided, and let the process
-  `umask` apply normally.
-- `processUmask` Set to an explicit numeric value to avoid
-  calling `process.umask()` when `chmod: true` is set.
-- `maxDepth` The maximum depth of subfolders to extract into. This
-  defaults to 1024. Anything deeper than the limit will raise a
-  warning and skip the entry. Set to `Infinity` to remove the
-  limitation.
-
-### class UnpackSync
-
-Synchronous version of `Unpack`.
-
-Note that using an asynchronous stream type with the `transform`
-option will cause undefined behavior in sync unpack streams.
-[MiniPass](http://npm.im/minipass)-based streams are designed for this
-use case.
-
-### class tar.Parser
-
-A writable stream that parses a tar archive stream. All the standard
-writable stream stuff is supported.
-
-If the archive is gzipped, then tar will detect this and unzip it.
-
-Emits `'entry'` events with `tar.ReadEntry` objects, which are
-themselves readable streams that you can pipe wherever.
-
-Each `entry` will not emit until the one before it is flushed through,
-so make sure to either consume the data (with `on('data', ...)` or
-`.pipe(...)`) or throw it away with `.resume()` to keep the stream
-flowing.
-
-#### constructor(options)
-
-Returns an event emitter that emits `entry` events with
-`tar.ReadEntry` objects.
-
-The following options are supported:
-
-- `strict` Treat warnings as crash-worthy errors. Default false.
-- `filter` A function that gets called with `(path, entry)` for each
-  entry being listed. Return `true` to emit the entry from the
-  archive, or `false` to skip it.
-- `onReadEntry` A function that gets called with `(entry)` for each entry
-  that passes the filter.
-- `onwarn` A function that will get called with `(code, message, data)` for
-  any warnings encountered. (See "Warnings and Errors")
-
-#### abort(error)
-
-Stop all parsing activities. This is called when there are zlib
-errors. It also emits an unrecoverable warning with the error provided.
-
-### class tar.ReadEntry extends [MiniPass](http://npm.im/minipass)
-
-A representation of an entry that is being read out of a tar archive.
-
-It has the following fields:
-
-- `extended` The extended metadata object provided to the constructor.
-- `globalExtended` The global extended metadata object provided to the
-  constructor.
-- `remain` The number of bytes remaining to be written into the
-  stream.
-- `blockRemain` The number of 512-byte blocks remaining to be written
-  into the stream.
-- `ignore` Whether this entry should be ignored.
-- `meta` True if this represents metadata about the next entry, false
-  if it represents a filesystem object.
-- All the fields from the header, extended header, and global extended
-  header are added to the ReadEntry object. So it has `path`, `type`,
-  `size`, `mode`, and so on.
-
-#### constructor(header, extended, globalExtended)
-
-Create a new ReadEntry object with the specified header, extended
-header, and global extended header values.
-
-### class tar.WriteEntry extends [MiniPass](http://npm.im/minipass)
-
-A representation of an entry that is being written from the file
-system into a tar archive.
-
-Emits data for the Header, and for the Pax Extended Header if one is
-required, as well as any body data.
-
-Creating a WriteEntry for a directory does not also create
-WriteEntry objects for all of the directory contents.
-
-It has the following fields:
-
-- `path` The path field that will be written to the archive. By
-  default, this is also the path from the cwd to the file system
-  object.
-- `portable` Omit metadata that is system-specific: `ctime`, `atime`,
-  `uid`, `gid`, `uname`, `gname`, `dev`, `ino`, and `nlink`. Note
-  that `mtime` is still included, because this is necessary for other
-  time-based operations. Additionally, `mode` is set to a "reasonable
-  default" for most unix systems, based on a `umask` value of `0o22`.
-- `myuid` If supported, the uid of the user running the current
-  process.
-- `myuser` The `env.USER` string if set, or `''`. Set as the entry
-  `uname` field if the file's `uid` matches `this.myuid`.
-- `maxReadSize` The maximum buffer size for `fs.read()` operations.
-  Defaults to 1 MB.
-- `linkCache` A Map object containing the device and inode value for
-  any file whose nlink is > 1, to identify hard links.
-- `statCache` A Map object that caches calls `lstat`.
-- `preservePaths` Allow absolute paths. By default, `/` is stripped
-  from absolute paths.
-- `cwd` The current working directory for creating the archive.
-  Defaults to `process.cwd()`.
-- `absolute` The absolute path to the entry on the filesystem. By
-  default, this is `path.resolve(this.cwd, this.path)`, but it can be
-  overridden explicitly.
-- `strict` Treat warnings as crash-worthy errors. Default false.
-- `win32` True if on a windows platform. Causes behavior where paths
-  replace `\` with `/` and filenames containing the windows-compatible
-  forms of `<|>?:` characters are converted to actual `<|>?:` characters
-  in the archive.
-- `noPax` Suppress pax extended headers. Note that this means that
-  long paths and linkpaths will be truncated, and large or negative
-  numeric values may be interpreted incorrectly.
-- `noMtime` Set to true to omit writing `mtime` values for entries.
-  Note that this prevents using other mtime-based features like
-  `tar.update` or the `keepNewer` option with the resulting tar archive.
-
-#### constructor(path, options)
-
-`path` is the path of the entry as it is written in the archive.
-
-The following options are supported:
-
-- `portable` Omit metadata that is system-specific: `ctime`, `atime`,
-  `uid`, `gid`, `uname`, `gname`, `dev`, `ino`, and `nlink`. Note
-  that `mtime` is still included, because this is necessary for other
-  time-based operations. Additionally, `mode` is set to a "reasonable
-  default" for most unix systems, based on a `umask` value of `0o22`.
-- `maxReadSize` The maximum buffer size for `fs.read()` operations.
-  Defaults to 1 MB.
-- `linkCache` A Map object containing the device and inode value for
-  any file whose nlink is > 1, to identify hard links.
-- `statCache` A Map object that caches calls `lstat`.
-- `preservePaths` Allow absolute paths. By default, `/` is stripped
-  from absolute paths.
-- `cwd` The current working directory for creating the archive.
-  Defaults to `process.cwd()`.
-- `absolute` The absolute path to the entry on the filesystem. By
-  default, this is `path.resolve(this.cwd, this.path)`, but it can be
-  overridden explicitly.
-- `strict` Treat warnings as crash-worthy errors. Default false.
-- `win32` True if on a windows platform. Causes behavior where paths
-  replace `\` with `/`.
-- `onwarn` A function that will get called with `(code, message, data)` for
-  any warnings encountered. (See "Warnings and Errors")
-- `noMtime` Set to true to omit writing `mtime` values for entries.
-  Note that this prevents using other mtime-based features like
-  `tar.update` or the `keepNewer` option with the resulting tar archive.
-- `umask` Set to restrict the modes on the entries in the archive,
-  somewhat like how umask works on file creation. Defaults to
-  `process.umask()` on unix systems, or `0o22` on Windows.
-
-#### warn(message, data)
-
-If strict, emit an error with the provided message.
-
-Otherwise, emit a `'warn'` event with the provided message and data.
-
-### class tar.WriteEntry.Sync
-
-Synchronous version of tar.WriteEntry
-
-### class tar.WriteEntry.Tar
-
-A version of tar.WriteEntry that gets its data from a tar.ReadEntry
-instead of from the filesystem.
-
-#### constructor(readEntry, options)
-
-`readEntry` is the entry being read out of another archive.
-
-The following options are supported:
-
-- `portable` Omit metadata that is system-specific: `ctime`, `atime`,
-  `uid`, `gid`, `uname`, `gname`, `dev`, `ino`, and `nlink`. Note
-  that `mtime` is still included, because this is necessary for other
-  time-based operations. Additionally, `mode` is set to a "reasonable
-  default" for most unix systems, based on a `umask` value of `0o22`.
-- `preservePaths` Allow absolute paths. By default, `/` is stripped
-  from absolute paths.
-- `strict` Treat warnings as crash-worthy errors. Default false.
-- `onwarn` A function that will get called with `(code, message, data)` for
-  any warnings encountered. (See "Warnings and Errors")
-- `noMtime` Set to true to omit writing `mtime` values for entries.
-  Note that this prevents using other mtime-based features like
-  `tar.update` or the `keepNewer` option with the resulting tar archive.
-
-### class tar.Header
-
-A class for reading and writing header blocks.
-
-It has the following fields:
-
-- `nullBlock` True if decoding a block which is entirely composed of
-  `0x00` null bytes. (Useful because tar files are terminated by
-  at least 2 null blocks.)
-- `cksumValid` True if the checksum in the header is valid, false
-  otherwise.
-- `needPax` True if the values, as encoded, will require a Pax
-  extended header.
-- `path` The path of the entry.
-- `mode` The 4 lowest-order octal digits of the file mode. That is,
-  read/write/execute permissions for world, group, and owner, and the
-  setuid, setgid, and sticky bits.
-- `uid` Numeric user id of the file owner
-- `gid` Numeric group id of the file owner
-- `size` Size of the file in bytes
-- `mtime` Modified time of the file
-- `cksum` The checksum of the header. This is generated by adding all
-  the bytes of the header block, treating the checksum field itself as
-  all ascii space characters (that is, `0x20`).
-- `type` The human-readable name of the type of entry this represents,
-  or the alphanumeric key if unknown.
-- `typeKey` The alphanumeric key for the type of entry this header
-  represents.
-- `linkpath` The target of Link and SymbolicLink entries.
-- `uname` Human-readable user name of the file owner
-- `gname` Human-readable group name of the file owner
-- `devmaj` The major portion of the device number. Always `0` for
-  files, directories, and links.
-- `devmin` The minor portion of the device number. Always `0` for
-  files, directories, and links.
-- `atime` File access time.
-- `ctime` File change time.
-
-#### constructor(data, [offset=0])
-
-`data` is optional. It is either a Buffer that should be interpreted
-as a tar Header starting at the specified offset and continuing for
-512 bytes, or a data object of keys and values to set on the header
-object, and eventually encode as a tar Header.
-
-#### decode(block, offset)
-
-Decode the provided buffer starting at the specified offset.
-
-Buffer length must be greater than 512 bytes.
-
-#### set(data)
-
-Set the fields in the data object.
-
-#### encode(buffer, offset)
-
-Encode the header fields into the buffer at the specified offset.
-
-Returns `this.needPax` to indicate whether a Pax Extended Header is
-required to properly encode the specified data.
-
-### class tar.Pax
-
-An object representing a set of key-value pairs in an Pax extended
-header entry.
-
-It has the following fields. Where the same name is used, they have
-the same semantics as the tar.Header field of the same name.
-
-- `global` True if this represents a global extended header, or false
-  if it is for a single entry.
-- `atime`
-- `charset`
-- `comment`
-- `ctime`
-- `gid`
-- `gname`
-- `linkpath`
-- `mtime`
-- `path`
-- `size`
-- `uid`
-- `uname`
-- `dev`
-- `ino`
-- `nlink`
-
-#### constructor(object, global)
-
-Set the fields set in the object. `global` is a boolean that defaults
-to false.
-
-#### encode()
-
-Return a Buffer containing the header and body for the Pax extended
-header entry, or `null` if there is nothing to encode.
-
-#### encodeBody()
-
-Return a string representing the body of the pax extended header
-entry.
-
-#### encodeField(fieldName)
-
-Return a string representing the key/value encoding for the specified
-fieldName, or `''` if the field is unset.
-
-### tar.Pax.parse(string, extended, global)
-
-Return a new Pax object created by parsing the contents of the string
-provided.
-
-If the `extended` object is set, then also add the fields from that
-object. (This is necessary because multiple metadata entries can
-occur in sequence.)
-
-### tar.types
-
-A translation table for the `type` field in tar headers.
-
-#### tar.types.name.get(code)
-
-Get the human-readable name for a given alphanumeric code.
-
-#### tar.types.code.get(name)
-
-Get the alphanumeric code for a given human-readable name.