couchbase 4.2.2 → 4.2.4

package/deps/couchbase-cxx-client/third_party/catch2/docs/command-line.md

@@ -15,11 +15,11 @@
 [Warnings](#warnings)<br>
 [Reporting timings](#reporting-timings)<br>
 [Load test names to run from a file](#load-test-names-to-run-from-a-file)<br>
-[Just test names](#just-test-names)<br>
 [Specify the order test cases are run](#specify-the-order-test-cases-are-run)<br>
 [Specify a seed for the Random Number Generator](#specify-a-seed-for-the-random-number-generator)<br>
 [Identify framework and version according to the libIdentify standard](#identify-framework-and-version-according-to-the-libidentify-standard)<br>
 [Wait for key before continuing](#wait-for-key-before-continuing)<br>
+[Skip all benchmarks](#skip-all-benchmarks)<br>
 [Specify the number of benchmark samples to collect](#specify-the-number-of-benchmark-samples-to-collect)<br>
 [Specify the number of resamples for bootstrapping](#specify-the-number-of-resamples-for-bootstrapping)<br>
 [Specify the confidence-interval for bootstrapping](#specify-the-confidence-interval-for-bootstrapping)<br>
@@ -29,14 +29,15 @@
 [Specify the section to run](#specify-the-section-to-run)<br>
 [Filenames as tags](#filenames-as-tags)<br>
 [Override output colouring](#override-output-colouring)<br>
+[Test Sharding](#test-sharding)<br>
+[Allow running the binary without tests](#allow-running-the-binary-without-tests)<br>
+[Output verbosity](#output-verbosity)<br>
 
 Catch works quite nicely without any command line options at all - but for those times when you want greater control the following options are available.
 Click one of the following links to take you straight to that option - or scroll on to browse the available options.
 
 <a href="#specifying-which-tests-to-run">               `    <test-spec> ...`</a><br />
 <a href="#usage">                                       `    -h, -?, --help`</a><br />
-<a href="#listing-available-tests-tags-or-reporters">   `    -l, --list-tests`</a><br />
-<a href="#listing-available-tests-tags-or-reporters">   `    -t, --list-tags`</a><br />
 <a href="#showing-results-for-successful-tests">        `    -s, --success`</a><br />
 <a href="#breaking-into-the-debugger">                  `    -b, --break`</a><br />
 <a href="#eliding-assertions-expected-to-throw">        `    -e, --nothrow`</a><br />
@@ -55,18 +56,25 @@ Click one of the following links to take you straight to that option - or scroll
 
 </br>
 
-<a href="#list-test-names-only">                        `    --list-test-names-only`</a><br />
+<a href="#listing-available-tests-tags-or-reporters">   `    --list-tests`</a><br />
+<a href="#listing-available-tests-tags-or-reporters">   `    --list-tags`</a><br />
 <a href="#listing-available-tests-tags-or-reporters">   `    --list-reporters`</a><br />
+<a href="#listing-available-tests-tags-or-reporters">   `    --list-listeners`</a><br />
 <a href="#order">                                       `    --order`</a><br />
 <a href="#rng-seed">                                    `    --rng-seed`</a><br />
 <a href="#libidentify">                                 `    --libidentify`</a><br />
 <a href="#wait-for-keypress">                           `    --wait-for-keypress`</a><br />
+<a href="#skip-benchmarks">                             `    --skip-benchmarks`</a><br />
 <a href="#benchmark-samples">                           `    --benchmark-samples`</a><br />
 <a href="#benchmark-resamples">                         `    --benchmark-resamples`</a><br />
 <a href="#benchmark-confidence-interval">               `    --benchmark-confidence-interval`</a><br />
 <a href="#benchmark-no-analysis">                       `    --benchmark-no-analysis`</a><br />
 <a href="#benchmark-warmup-time">                       `    --benchmark-warmup-time`</a><br />
-<a href="#use-colour">                                  `    --use-colour`</a><br />
+<a href="#colour-mode">                                 `    --colour-mode`</a><br />
+<a href="#test-sharding">                               `    --shard-count`</a><br />
+<a href="#test-sharding">                               `    --shard-index`</a><br />
+<a href=#no-tests-override>                             `    --allow-running-no-tests`</a><br />
+<a href=#output-verbosity>                              `    --verbosity`</a><br />
 
 </br>
 
@@ -93,7 +101,8 @@ Inclusions and exclusions are evaluated in left-to-right order.
 
 Test case examples:
 
-<pre>thisTestOnly            Matches the test case called, 'thisTestOnly'
+```
+thisTestOnly            Matches the test case called, 'thisTestOnly'
 "this test only"        Matches the test case called, 'this test only'
 these*                  Matches all cases starting with 'these'
 exclude:notThis         Matches all tests except, 'notThis'
@@ -101,8 +110,9 @@ exclude:notThis         Matches all tests except, 'notThis'
 ~*private*              Matches all tests except those that contain 'private'
 a* ~ab* abc             Matches all tests that start with 'a', except those that
                         start with 'ab', except 'abc', which is included
+~[tag1]                 Matches all tests except those tagged with '[tag1]'
 -# [#somefile]          Matches all tests from the file 'somefile.cpp'
-</pre>
+```
 
 Names within square brackets are interpreted as tags.
 A series of tags form an AND expression whereas a comma-separated sequence forms an OR expression. e.g.:
@@ -116,18 +126,48 @@ Test names containing special characters, such as `,` or `[` can specify them on
 <a id="choosing-a-reporter-to-use"></a>
 ## Choosing a reporter to use
 
-<pre>-r, --reporter &lt;reporter></pre>
+<pre>-r, --reporter &lt;reporter[::key=value]*&gt;</pre>
 
-A reporter is an object that formats and structures the output of running tests, and potentially summarises the results. By default a console reporter is used that writes, IDE friendly, textual output. Catch comes bundled with some alternative reporters, but more can be added in client code.<br />
-The bundled reporters are:
+Reporters are how the output from Catch2 (results of assertions, tests,
+benchmarks and so on) is formatted and written out. The default reporter
+is called the "Console" reporter and is intended to provide relatively
+verbose and human-friendly output.
 
-<pre>-r console
--r compact
--r xml
--r junit
-</pre>
+Reporters are also individually configurable. To pass configuration options
+to the reporter, you append `::key=value` to the reporter specification
+as many times as you want, e.g. `--reporter xml::out=someFile.xml`.
+
+The keys must either be prefixed by "X", in which case they are not parsed
+by Catch2 and are only passed down to the reporter, or one of options
+hardcoded into Catch2. Currently there are only 2,
+["out"](#sending-output-to-a-file), and ["colour-mode"](#colour-mode).
+
+_Note that the reporter might still check the X-prefixed options for
+validity, and throw an error if they are wrong._
+
+> Support for passing arguments to reporters through the `-r`, `--reporter` flag was introduced in Catch2 3.0.1
+
+There are multiple built-in reporters, you can see what they do by using the
+[`--list-reporters`](command-line.md#listing-available-tests-tags-or-reporters)
+flag. If you need a reporter providing custom format outside of the already
+provided ones, look at the ["write your own reporter" part of the reporter
+documentation](reporters.md#writing-your-own-reporter).
+
+This option may be passed multiple times to use multiple (different)
+reporters  at the same time. See the [reporter documentation](reporters.md#multiple-reporters)
+for details on what the resulting behaviour is. Also note that at most one
+reporter can be provided without the output-file part of reporter spec.
+This reporter will use the "default" output destination, based on
+the [`-o`, `--out`](#sending-output-to-a-file) option.
+
+> Support for using multiple different reporters at the same time was [introduced](https://github.com/catchorg/Catch2/pull/2183) in Catch2 3.0.1
+
+
+_Note: There is currently no way to escape `::` in the reporter spec,
+and thus the reporter names, or configuration keys and values, cannot
+contain `::`. As `::` in paths is relatively obscure (unlike ':'), we do
+not consider this an issue._
 
-The JUnit reporter is an xml format that follows the structure of the JUnit XML Report ANT task, as consumed by a number of third-party tools, including Continuous Integration servers such as Hudson. If not otherwise needed, the standard XML reporter is preferred as this is a streaming reporter, whereas the Junit reporter needs to hold all its results until the end so it can write the overall results into attributes of the root node.
 
 <a id="breaking-into-the-debugger"></a>
 ## Breaking into the debugger
@@ -157,24 +197,62 @@ Sometimes this results in a flood of failure messages and you'd rather just see
 
 <a id="listing-available-tests-tags-or-reporters"></a>
 ## Listing available tests, tags or reporters
-<pre>-l, --list-tests
--t, --list-tags
+```
+--list-tests
+--list-tags
 --list-reporters
-</pre>
+--list-listeners
+```
 
-```-l``` or ```--list-tests``` will list all registered tests, along with any tags.
-If one or more test-specs have been supplied too then only the matching tests will be listed.
+> The `--list*` options became customizable through reporters in Catch2 3.0.1
 
-```-t``` or ```--list-tags``` lists all available tags, along with the number of test cases they match. Again, supplying test specs limits the tags that match.
+> The `--list-listeners` option was added in Catch2 3.0.1
 
-```--list-reporters``` lists the available reporters.
+`--list-tests` lists all registered tests matching specified test spec.
+Usually this listing also includes tags, and potentially also other
+information, like source location, based on verbosity and reporter's design.
+
+`--list-tags` lists all tags from registered tests matching specified test
+spec. Usually this also includes number of tests cases they match and
+similar information.
+
+`--list-reporters` lists all available reporters and their descriptions.
+
+`--list-listeners` lists all registered listeners and their descriptions.
+
+The [`--verbosity` argument](#output-verbosity) modifies the level of detail provided by the default `--list*` options
+as follows:
+
+| Option             | `normal` (default)              | `quiet`             | `high`                                  |
+|--------------------|---------------------------------|---------------------|-----------------------------------------|
+| `--list-tests`     | Test names and tags             | Test names only     | Same as `normal`, plus source code line |
+| `--list-tags`      | Tags and counts                 | Same as `normal`    | Same as `normal`                        |
+| `--list-reporters` | Reporter names and descriptions | Reporter names only | Same as `normal`                        |
+| `--list-listeners` | Listener names and descriptions | Same as `normal`    | Same as `normal`                        |
 
 <a id="sending-output-to-a-file"></a>
 ## Sending output to a file
-<pre>-o, --out &lt;filename>
+<pre>-o, --out &lt;filename&gt;
 </pre>
 
-Use this option to send all output to a file. By default output is sent to stdout (note that uses of stdout and stderr *from within test cases* are redirected and included in the report - so even stderr will effectively end up on stdout).
+Use this option to send all output to a file, instead of stdout. You can
+use `-` as the filename to explicitly send the output to stdout (this is
+useful e.g. when using multiple reporters).
+
+> Support for `-` as the filename was introduced in Catch2 3.0.1
+
+Filenames starting with "%" (percent symbol) are reserved by Catch2 for
+meta purposes, e.g. using `%debug` as the filename opens stream that
+writes to platform specific debugging/logging mechanism.
+
+Catch2 currently recognizes 3 meta streams:
+
+* `%debug` - writes to platform specific debugging/logging output
+* `%stdout` - writes to stdout
+* `%stderr` - writes to stderr
+
+> Support for `%stdout` and `%stderr` was introduced in Catch2 3.0.1
+
 
 <a id="naming-a-test-run"></a>
 ## Naming a test run
@@ -205,16 +283,24 @@ This option transforms tabs and newline characters into ```\t``` and ```\n``` re
 ## Warnings
 <pre>-w, --warn &lt;warning name></pre>
 
-Enables reporting of suspicious test states. There are currently two
-available warnings
+You can think of Catch2's warnings as the equivalent of `-Werror` (`/WX`)
+flag for C++ compilers. It turns some suspicious occurrences, like a section
+without assertions, into errors. Because these might be intended, warnings
+are not enabled by default, but user can opt in.
+
+You can enable multiple warnings at the same time.
+
+There are currently two warnings implemented:
 
 ```
-    NoAssertions   // Fail test case / leaf section if no assertions
-                   // (e.g. `REQUIRE`) is encountered.
-    NoTests        // Return non-zero exit code when no test cases were run
-                   // Also calls reporter's noMatchingTestCases method
+    NoAssertions        // Fail test case / leaf section if no assertions
+                        // (e.g. `REQUIRE`) is encountered.
+    UnmatchedTestSpec   // Fail test run if any of the CLI test specs did
+                        // not match any tests.
 ```
 
+> `UnmatchedTestSpec` was introduced in Catch2 3.0.1.
+
 
 <a id="reporting-timings"></a>
 ## Reporting timings
@@ -224,10 +310,10 @@ When set to ```yes``` Catch will report the duration of each test case, in milli
 
 <pre>-D, --min-duration &lt;value></pre>
 
-> `--min-duration` was [introduced](https://github.com/catchorg/Catch2/pull/1910) in Catch 2.13.0
+> `--min-duration` was [introduced](https://github.com/catchorg/Catch2/pull/1910) in Catch2 2.13.0
 
 When set, Catch will report the duration of each test case that took more
-than &lt;value> seconds, in milliseconds. This option is overriden by both
+than &lt;value> seconds, in milliseconds. This option is overridden by both
 `-d yes` and `-d no`, so that either all durations are reported, or none
 are.
 
@@ -236,15 +322,13 @@ are.
 ## Load test names to run from a file
 <pre>-f, --input-file &lt;filename></pre>
 
-Provide the name of a file that contains a list of test case names - one per line. Blank lines are skipped and anything after the comment character, ```#```, is ignored.
+Provide the name of a file that contains a list of test case names,
+one per line. Blank lines are skipped.
 
-A useful way to generate an initial instance of this file is to use the <a href="#list-test-names-only">list-test-names-only</a> option. This can then be manually curated to specify a specific subset of tests - or in a specific order.
-
-<a id="list-test-names-only"></a>
-## Just test names
-<pre>--list-test-names-only</pre>
-
-This option lists all available tests in a non-indented form, one on each line. This makes it ideal for saving to a file and feeding back into the <a href="#input-file">```-f``` or ```--input-file```</a> option.
+A useful way to generate an initial instance of this file is to combine
+the [`--list-tests`](#listing-available-tests-tags-or-reporters) flag with
+the [`--verbosity quiet`](#output-verbosity) option. You can also
+use test specs to filter this list down to what you want first.
 
 
 <a id="order"></a>
@@ -255,8 +339,8 @@ Test cases are ordered one of three ways:
 
 ### decl
 Declaration order (this is the default order if no --order argument is provided).
-Tests in the same TU are sorted using their declaration orders, different
-TUs are in an implementation (linking) dependent order.
+Tests in the same translation unit are sorted using their declaration orders,
+different TUs are sorted in an implementation (linking) dependent order.
 
 
 ### lex
@@ -265,23 +349,36 @@ Lexicographic order. Tests are sorted by their name, their tags are ignored.
 
 ### rand
 
-Randomly sorted. The order is dependent on Catch2's random seed (see
+Randomly ordered. The order is dependent on Catch2's random seed (see
 [`--rng-seed`](#rng-seed)), and is subset invariant. What this means
 is that as long as the random seed is fixed, running only some tests
 (e.g. via tag) does not change their relative order.
 
 > The subset stability was introduced in Catch2 v2.12.0
 
+Since the random order was made subset stable, we promise that given
+the same random seed, the order of test cases will be the same across
+different platforms, as long as the tests were compiled against identical
+version of Catch2. We reserve the right to change the relative order
+of tests cases between Catch2 versions, but it is unlikely to happen often.
+
 
 <a id="rng-seed"></a>
 ## Specify a seed for the Random Number Generator
-<pre>--rng-seed &lt;'time'|number&gt;</pre>
+<pre>--rng-seed &lt;'time'|'random-device'|number&gt;</pre>
+
+Sets the seed for random number generators used by Catch2. These are used
+e.g. to shuffle tests when user asks for tests to be in random order.
 
-Sets a seed for the random number generator using ```std::srand()```. 
-If a number is provided this is used directly as the seed so the random pattern is repeatable.
-Alternatively if the keyword ```time``` is provided then the result of calling ```std::time(0)``` is used and so the pattern becomes unpredictable. In some cases, you might need to pass the keyword ```time``` in double quotes instead of single quotes.
+Using `time` as the argument asks Catch2 generate the seed through call
+to `std::time(nullptr)`. This provides very weak randomness and multiple
+runs of the binary can generate the same seed if they are started close
+to each other.
+
+Using `random-device` asks for `std::random_device` to be used instead.
+If your implementation provides working `std::random_device`, it should
+be preferred to using `time`. Catch2 uses `std::random_device` by default.
 
-In either case the actual value for the seed is printed as part of Catch's output so if an issue is discovered that is sensitive to test ordering the ordering can be reproduced - even if it was originally seeded from ```std::time(0)```.
 
 <a id="libidentify"></a>
 ## Identify framework and version according to the libIdentify standard
@@ -296,11 +393,21 @@ See [The LibIdentify repo for more information and examples](https://github.com/
 Will cause the executable to print a message and wait until the return/ enter key is pressed before continuing -
 either before running any tests, after running all tests - or both, depending on the argument.
 
+<a id="skip-benchmarks"></a>
+## Skip all benchmarks
+<pre>--skip-benchmarks</pre>
+
+> [Introduced](https://github.com/catchorg/Catch2/issues/2408) in Catch2 3.0.1.
+
+This flag tells Catch2 to skip running all benchmarks. Benchmarks in this
+case mean code blocks in `BENCHMARK` and `BENCHMARK_ADVANCED` macros, not
+test cases with the `[!benchmark]` tag.
+
 <a id="benchmark-samples"></a>
 ## Specify the number of benchmark samples to collect
 <pre>--benchmark-samples &lt;# of samples&gt;</pre>
 
-> [Introduced](https://github.com/catchorg/Catch2/issues/1616) in Catch 2.9.0.
+> [Introduced](https://github.com/catchorg/Catch2/issues/1616) in Catch2 2.9.0.
 
 When running benchmarks a number of "samples" is collected. This is the base data for later statistical analysis.
 Per sample a clock resolution dependent number of iterations of the user code is run, which is independent of the number of samples. Defaults to 100.
@@ -309,7 +416,7 @@ Per sample a clock resolution dependent number of iterations of the user code is
 ## Specify the number of resamples for bootstrapping
 <pre>--benchmark-resamples &lt;# of resamples&gt;</pre>
 
-> [Introduced](https://github.com/catchorg/Catch2/issues/1616) in Catch 2.9.0.
+> [Introduced](https://github.com/catchorg/Catch2/issues/1616) in Catch2 2.9.0.
 
 After the measurements are performed, statistical [bootstrapping] is performed
 on the samples. The number of resamples for that bootstrapping is configurable
@@ -324,7 +431,7 @@ defaults to 95%).
 ## Specify the confidence-interval for bootstrapping
 <pre>--benchmark-confidence-interval &lt;confidence-interval&gt;</pre>
 
-> [Introduced](https://github.com/catchorg/Catch2/issues/1616) in Catch 2.9.0.
+> [Introduced](https://github.com/catchorg/Catch2/issues/1616) in Catch2 2.9.0.
 
 The confidence-interval is used for statistical bootstrapping on the samples to
 calculate the upper and lower bounds of mean and standard deviation.
@@ -334,7 +441,7 @@ Must be between 0 and 1 and defaults to 0.95.
 ## Disable statistical analysis of collected benchmark samples
 <pre>--benchmark-no-analysis</pre>
 
-> [Introduced](https://github.com/catchorg/Catch2/issues/1616) in Catch 2.9.0.
+> [Introduced](https://github.com/catchorg/Catch2/issues/1616) in Catch2 2.9.0.
 
 When this flag is specified no bootstrapping or any other statistical analysis is performed.
 Instead the user code is only measured and the plain mean from the samples is reported.
@@ -343,7 +450,7 @@ Instead the user code is only measured and the plain mean from the samples is re
 ## Specify the amount of time in milliseconds spent on warming up each test
 <pre>--benchmark-warmup-time</pre>
 
-> [Introduced](https://github.com/catchorg/Catch2/pull/1844) in Catch 2.11.2.
+> [Introduced](https://github.com/catchorg/Catch2/pull/1844) in Catch2 2.11.2.
 
 Configure the amount of time spent warming up each test.
 
@@ -392,7 +499,7 @@ There are some limitations of this feature to be aware of:
 - Code outside of sections being skipped will still be executed - e.g. any set-up code in the TEST_CASE before the
 start of the first section.</br>
 - At time of writing, wildcards are not supported in section names.
-- If you specify a section without narrowing to a test case first then all test cases will be executed 
+- If you specify a section without narrowing to a test case first then all test cases will be executed
 (but only matching sections within them).
 
 
@@ -400,21 +507,81 @@ start of the first section.</br>
 ## Filenames as tags
 <pre>-#, --filenames-as-tags</pre>
 
-When this option is used then every test is given an additional tag which is formed of the unqualified 
-filename it is found in, with any extension stripped, prefixed with the `#` character.
+This option adds an extra tag to all test cases. The tag is `#` followed
+by the unqualified filename the test case is defined in, with the _last_
+extension stripped out.
 
-So, for example,  tests within the file `~\Dev\MyProject\Ferrets.cpp` would be tagged `[#Ferrets]`.
+For example, tests within the file `tests\SelfTest\UsageTests\BDD.tests.cpp`
+will be given the `[#BDD.tests]` tag.
 
-<a id="use-colour"></a>
+
+<a id="colour-mode"></a>
 ## Override output colouring
-<pre>--use-colour &lt;yes|no|auto&gt;</pre>
+<pre>--colour-mode &lt;ansi|win32|none|default&gt;</pre>
+
+> The `--colour-mode` option replaced the old `--colour` option in Catch2 3.0.1
+
+
+Catch2 support two different ways of colouring terminal output, and by
+default it attempts to make a good guess on which implementation to use
+(and whether to even use it, e.g. Catch2 tries to avoid writing colour
+codes when writing the results into a file).
+
+`--colour-mode` allows the user to explicitly select what happens.
+
+* `--colour-mode ansi` tells Catch2 to always use ANSI colour codes, even
+when writing to a file
+* `--colour-mode win32` tells Catch2 to use colour implementation based
+  on Win32 terminal API
+* `--colour-mode none` tells Catch2 to disable colours completely
+* `--colour-mode default` lets Catch2 decide
+
+`--colour-mode default` is the default setting.
+
+
+<a id="test-sharding"></a>
+## Test Sharding
+<pre>--shard-count <#number of shards>, --shard-index <#shard index to run></pre>
+
+> [Introduced](https://github.com/catchorg/Catch2/pull/2257) in Catch2 3.0.1.
+
+When `--shard-count <#number of shards>` is used, the tests to execute
+will be split evenly in to the given number of sets, identified by indices
+starting at 0. The tests in the set given by
+`--shard-index <#shard index to run>` will be executed. The default shard
+count is `1`, and the default index to run is `0`.
+
+_Shard index must be less than number of shards. As the name suggests,
+it is treated as an index of the shard to run._
+
+Sharding is useful when you want to split test execution across multiple
+processes, as is done with the [Bazel test sharding](https://docs.bazel.build/versions/main/test-encyclopedia.html#test-sharding).
+
+
+<a id="no-tests-override"></a>
+## Allow running the binary without tests
+<pre>--allow-running-no-tests</pre>
+
+> Introduced in Catch2 3.0.1.
+
+By default, Catch2 test binaries return non-0 exit code if no tests were run,
+e.g. if the binary was compiled with no tests, the provided test spec matched no
+tests, or all tests [were skipped at runtime](skipping-passing-failing.md#top). This flag
+overrides that, so a test run with no tests still returns 0.
+
+## Output verbosity
+```
+-v, --verbosity <quiet|normal|high>
+```
+
+Changing verbosity might change how many details Catch2's reporters output.
+However, you should consider changing the verbosity level as a _suggestion_.
+Not all reporters support all verbosity levels, e.g. because the reporter's
+format cannot meaningfully change. In that case, the verbosity level is
+ignored.
 
-Catch colours output for terminals, but omits colouring when it detects that
-output is being sent to a pipe. This is done to avoid interfering with automated
-processing of output.
+Verbosity defaults to _normal_.
 
-`--use-colour yes` forces coloured output, `--use-colour no` disables coloured
-output. The default behaviour is `--use-colour auto`.
 
 ---
 

package/deps/couchbase-cxx-client/third_party/catch2/docs/commercial-users.md

@@ -1,22 +1,23 @@
 <a id="top"></a>
-# Commercial users of Catch
+# Commercial users of Catch2
 
-As well as [Open Source](opensource-users.md#top) users Catch is widely used within proprietary code bases too.
-Many organisations like to keep this information internal, and that's fine, 
-but if you're more open it would be great if we could list the names of as
-many organisations as possible that use Catch somewhere in their codebase. 
-Enterprise environments often tend to be far more conservative in their tool adoption - 
-and being aware that other companies are using Catch can ease the path in.
+Catch2 is also widely used in proprietary code bases. This page contains
+some of them that are willing to share this information.
+
+If you want to add your organisation, please check that there is no issue
+with you sharing this fact.
 
-So if you are aware of Catch usage in your organisation, and are fairly confident there is no issue with sharing this
-fact then please let us know - either directly, via a PR or 
-[issue](https://github.com/philsquared/Catch/issues), or on the [forums](https://groups.google.com/forum/?fromgroups#!forum/catch-forum).
- 
  - Bloomberg
  - [Bloomlife](https://bloomlife.com)
- - NASA
  - [Inscopix Inc.](https://www.inscopix.com/)
+ - Locksley.CZ
  - [Makimo](https://makimo.pl/)
+ - NASA
+ - [Nexus Software Systems](https://nexwebsites.com)
  - [UX3D](https://ux3d.io)
  - [King](https://king.com)
- 
+
+
+---
+
+[Home](Readme.md#top)