com.hikky.vketcloudsdk 3.2.4 → 3.4.4

package/PackageResources/tools/VRMScrambler/Source/Library/zlib/inflate.c.meta

@@ -1,27 +0,0 @@
-fileFormatVersion: 2
-guid: 4a9952340fa225147a52289b622bd315
-PluginImporter:
-  externalObjects: {}
-  serializedVersion: 2
-  iconMap: {}
-  executionOrder: {}
-  defineConstraints: []
-  isPreloaded: 0
-  isOverridable: 1
-  isExplicitlyReferenced: 0
-  validateReferences: 1
-  platformData:
-  - first:
-      Any: 
-    second:
-      enabled: 1
-      settings: {}
-  - first:
-      Editor: Editor
-    second:
-      enabled: 0
-      settings:
-        DefaultValueInitialized: true
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 

package/PackageResources/tools/VRMScrambler/Source/Library/zlib/inflate.h

@@ -1,122 +0,0 @@
-/* inflate.h -- internal inflate state definition
- * Copyright (C) 1995-2009 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* define NO_GZIP when compiling if you want to disable gzip header and
-   trailer decoding by inflate().  NO_GZIP would be used to avoid linking in
-   the crc code when it is not needed.  For shared libraries, gzip decoding
-   should be left enabled. */
-#ifndef NO_GZIP
-#  define GUNZIP
-#endif
-
-/* Possible inflate modes between inflate() calls */
-typedef enum {
-    HEAD,       /* i: waiting for magic header */
-    FLAGS,      /* i: waiting for method and flags (gzip) */
-    TIME,       /* i: waiting for modification time (gzip) */
-    OS,         /* i: waiting for extra flags and operating system (gzip) */
-    EXLEN,      /* i: waiting for extra length (gzip) */
-    EXTRA,      /* i: waiting for extra bytes (gzip) */
-    NAME,       /* i: waiting for end of file name (gzip) */
-    COMMENT,    /* i: waiting for end of comment (gzip) */
-    HCRC,       /* i: waiting for header crc (gzip) */
-    DICTID,     /* i: waiting for dictionary check value */
-    DICT,       /* waiting for inflateSetDictionary() call */
-        TYPE,       /* i: waiting for type bits, including last-flag bit */
-        TYPEDO,     /* i: same, but skip check to exit inflate on new block */
-        STORED,     /* i: waiting for stored size (length and complement) */
-        COPY_,      /* i/o: same as COPY below, but only first time in */
-        COPY,       /* i/o: waiting for input or output to copy stored block */
-        TABLE,      /* i: waiting for dynamic block table lengths */
-        LENLENS,    /* i: waiting for code length code lengths */
-        CODELENS,   /* i: waiting for length/lit and distance code lengths */
-            LEN_,       /* i: same as LEN below, but only first time in */
-            LEN,        /* i: waiting for length/lit/eob code */
-            LENEXT,     /* i: waiting for length extra bits */
-            DIST,       /* i: waiting for distance code */
-            DISTEXT,    /* i: waiting for distance extra bits */
-            MATCH,      /* o: waiting for output space to copy string */
-            LIT,        /* o: waiting for output space to write literal */
-    CHECK,      /* i: waiting for 32-bit check value */
-    LENGTH,     /* i: waiting for 32-bit length (gzip) */
-    DONE,       /* finished check, done -- remain here until reset */
-    BAD,        /* got a data error -- remain here until reset */
-    MEM,        /* got an inflate() memory error -- remain here until reset */
-    SYNC        /* looking for synchronization bytes to restart inflate() */
-} inflate_mode;
-
-/*
-    State transitions between above modes -
-
-    (most modes can go to BAD or MEM on error -- not shown for clarity)
-
-    Process header:
-        HEAD -> (gzip) or (zlib) or (raw)
-        (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT ->
-                  HCRC -> TYPE
-        (zlib) -> DICTID or TYPE
-        DICTID -> DICT -> TYPE
-        (raw) -> TYPEDO
-    Read deflate blocks:
-            TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK
-            STORED -> COPY_ -> COPY -> TYPE
-            TABLE -> LENLENS -> CODELENS -> LEN_
-            LEN_ -> LEN
-    Read deflate codes in fixed or dynamic block:
-                LEN -> LENEXT or LIT or TYPE
-                LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
-                LIT -> LEN
-    Process trailer:
-        CHECK -> LENGTH -> DONE
- */
-
-/* state maintained between inflate() calls.  Approximately 10K bytes. */
-struct inflate_state {
-    inflate_mode mode;          /* current inflate mode */
-    int last;                   /* true if processing last block */
-    int wrap;                   /* bit 0 true for zlib, bit 1 true for gzip */
-    int havedict;               /* true if dictionary provided */
-    int flags;                  /* gzip header method and flags (0 if zlib) */
-    unsigned dmax;              /* zlib header max distance (INFLATE_STRICT) */
-    unsigned long check;        /* protected copy of check value */
-    unsigned long total;        /* protected copy of output count */
-    gz_headerp head;            /* where to save gzip header information */
-        /* sliding window */
-    unsigned wbits;             /* log base 2 of requested window size */
-    unsigned wsize;             /* window size or zero if not using window */
-    unsigned whave;             /* valid bytes in the window */
-    unsigned wnext;             /* window write index */
-    unsigned char FAR *window;  /* allocated sliding window, if needed */
-        /* bit accumulator */
-    unsigned long hold;         /* input bit accumulator */
-    unsigned bits;              /* number of bits in "in" */
-        /* for string and stored block copying */
-    unsigned length;            /* literal or length of data to copy */
-    unsigned offset;            /* distance back to copy string from */
-        /* for table and code decoding */
-    unsigned extra;             /* extra bits needed */
-        /* fixed and dynamic code tables */
-    code const FAR *lencode;    /* starting table for length/literal codes */
-    code const FAR *distcode;   /* starting table for distance codes */
-    unsigned lenbits;           /* index bits for lencode */
-    unsigned distbits;          /* index bits for distcode */
-        /* dynamic table building */
-    unsigned ncode;             /* number of code length code lengths */
-    unsigned nlen;              /* number of length code lengths */
-    unsigned ndist;             /* number of distance code lengths */
-    unsigned have;              /* number of code lengths in lens[] */
-    code FAR *next;             /* next available space in codes[] */
-    unsigned short lens[320];   /* temporary storage for code lengths */
-    unsigned short work[288];   /* work area for code table building */
-    code codes[ENOUGH];         /* space for code tables */
-    int sane;                   /* if false, allow invalid distance too far */
-    int back;                   /* bits back of last unprocessed length/lit */
-    unsigned was;               /* initial length of match */
-};

package/PackageResources/tools/VRMScrambler/Source/Library/zlib/inflate.h.meta

@@ -1,27 +0,0 @@
-fileFormatVersion: 2
-guid: f75a6023c5a34084e9baca7727f604cd
-PluginImporter:
-  externalObjects: {}
-  serializedVersion: 2
-  iconMap: {}
-  executionOrder: {}
-  defineConstraints: []
-  isPreloaded: 0
-  isOverridable: 1
-  isExplicitlyReferenced: 0
-  validateReferences: 1
-  platformData:
-  - first:
-      Any: 
-    second:
-      enabled: 1
-      settings: {}
-  - first:
-      Editor: Editor
-    second:
-      enabled: 0
-      settings:
-        DefaultValueInitialized: true
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 

package/PackageResources/tools/VRMScrambler/Source/Library/zlib/inftrees.c

@@ -1,306 +0,0 @@
-/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2013 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-
-#define MAXBITS 15
-
-const char inflate_copyright[] =
-   " inflate 1.2.8 Copyright 1995-2013 Mark Adler ";
-/*
-  If you use the zlib library in a product, an acknowledgment is welcome
-  in the documentation of your product. If for some reason you cannot
-  include such an acknowledgment, I would appreciate that you keep this
-  copyright string in the executable of your product.
- */
-
-/*
-   Build a set of tables to decode the provided canonical Huffman code.
-   The code lengths are lens[0..codes-1].  The result starts at *table,
-   whose indices are 0..2^bits-1.  work is a writable array of at least
-   lens shorts, which is used as a work area.  type is the type of code
-   to be generated, CODES, LENS, or DISTS.  On return, zero is success,
-   -1 is an invalid code, and +1 means that ENOUGH isn't enough.  table
-   on return points to the next available entry's address.  bits is the
-   requested root table index bits, and on return it is the actual root
-   table index bits.  It will differ if the request is greater than the
-   longest code or if it is less than the shortest code.
- */
-int ZLIB_INTERNAL inflate_table(type, lens, codes, table, bits, work)
-codetype type;
-unsigned short FAR *lens;
-unsigned codes;
-code FAR * FAR *table;
-unsigned FAR *bits;
-unsigned short FAR *work;
-{
-    unsigned len;               /* a code's length in bits */
-    unsigned sym;               /* index of code symbols */
-    unsigned min, max;          /* minimum and maximum code lengths */
-    unsigned root;              /* number of index bits for root table */
-    unsigned curr;              /* number of index bits for current table */
-    unsigned drop;              /* code bits to drop for sub-table */
-    int left;                   /* number of prefix codes available */
-    unsigned used;              /* code entries in table used */
-    unsigned huff;              /* Huffman code */
-    unsigned incr;              /* for incrementing code, index */
-    unsigned fill;              /* index for replicating entries */
-    unsigned low;               /* low bits for current root entry */
-    unsigned mask;              /* mask for low root bits */
-    code here;                  /* table entry for duplication */
-    code FAR *next;             /* next available space in table */
-    const unsigned short FAR *base;     /* base value table to use */
-    const unsigned short FAR *extra;    /* extra bits table to use */
-    int end;                    /* use base and extra for symbol > end */
-    unsigned short count[MAXBITS+1];    /* number of codes of each length */
-    unsigned short offs[MAXBITS+1];     /* offsets in table for each length */
-    static const unsigned short lbase[31] = { /* Length codes 257..285 base */
-        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
-        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
-    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
-        16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 72, 78};
-    static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
-        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
-        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
-        8193, 12289, 16385, 24577, 0, 0};
-    static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
-        16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
-        23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
-        28, 28, 29, 29, 64, 64};
-
-    /*
-       Process a set of code lengths to create a canonical Huffman code.  The
-       code lengths are lens[0..codes-1].  Each length corresponds to the
-       symbols 0..codes-1.  The Huffman code is generated by first sorting the
-       symbols by length from short to long, and retaining the symbol order
-       for codes with equal lengths.  Then the code starts with all zero bits
-       for the first code of the shortest length, and the codes are integer
-       increments for the same length, and zeros are appended as the length
-       increases.  For the deflate format, these bits are stored backwards
-       from their more natural integer increment ordering, and so when the
-       decoding tables are built in the large loop below, the integer codes
-       are incremented backwards.
-
-       This routine assumes, but does not check, that all of the entries in
-       lens[] are in the range 0..MAXBITS.  The caller must assure this.
-       1..MAXBITS is interpreted as that code length.  zero means that that
-       symbol does not occur in this code.
-
-       The codes are sorted by computing a count of codes for each length,
-       creating from that a table of starting indices for each length in the
-       sorted table, and then entering the symbols in order in the sorted
-       table.  The sorted table is work[], with that space being provided by
-       the caller.
-
-       The length counts are used for other purposes as well, i.e. finding
-       the minimum and maximum length codes, determining if there are any
-       codes at all, checking for a valid set of lengths, and looking ahead
-       at length counts to determine sub-table sizes when building the
-       decoding tables.
-     */
-
-    /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
-    for (len = 0; len <= MAXBITS; len++)
-        count[len] = 0;
-    for (sym = 0; sym < codes; sym++)
-        count[lens[sym]]++;
-
-    /* bound code lengths, force root to be within code lengths */
-    root = *bits;
-    for (max = MAXBITS; max >= 1; max--)
-        if (count[max] != 0) break;
-    if (root > max) root = max;
-    if (max == 0) {                     /* no symbols to code at all */
-        here.op = (unsigned char)64;    /* invalid code marker */
-        here.bits = (unsigned char)1;
-        here.val = (unsigned short)0;
-        *(*table)++ = here;             /* make a table to force an error */
-        *(*table)++ = here;
-        *bits = 1;
-        return 0;     /* no symbols, but wait for decoding to report error */
-    }
-    for (min = 1; min < max; min++)
-        if (count[min] != 0) break;
-    if (root < min) root = min;
-
-    /* check for an over-subscribed or incomplete set of lengths */
-    left = 1;
-    for (len = 1; len <= MAXBITS; len++) {
-        left <<= 1;
-        left -= count[len];
-        if (left < 0) return -1;        /* over-subscribed */
-    }
-    if (left > 0 && (type == CODES || max != 1))
-        return -1;                      /* incomplete set */
-
-    /* generate offsets into symbol table for each length for sorting */
-    offs[1] = 0;
-    for (len = 1; len < MAXBITS; len++)
-        offs[len + 1] = offs[len] + count[len];
-
-    /* sort symbols by length, by symbol order within each length */
-    for (sym = 0; sym < codes; sym++)
-        if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
-
-    /*
-       Create and fill in decoding tables.  In this loop, the table being
-       filled is at next and has curr index bits.  The code being used is huff
-       with length len.  That code is converted to an index by dropping drop
-       bits off of the bottom.  For codes where len is less than drop + curr,
-       those top drop + curr - len bits are incremented through all values to
-       fill the table with replicated entries.
-
-       root is the number of index bits for the root table.  When len exceeds
-       root, sub-tables are created pointed to by the root entry with an index
-       of the low root bits of huff.  This is saved in low to check for when a
-       new sub-table should be started.  drop is zero when the root table is
-       being filled, and drop is root when sub-tables are being filled.
-
-       When a new sub-table is needed, it is necessary to look ahead in the
-       code lengths to determine what size sub-table is needed.  The length
-       counts are used for this, and so count[] is decremented as codes are
-       entered in the tables.
-
-       used keeps track of how many table entries have been allocated from the
-       provided *table space.  It is checked for LENS and DIST tables against
-       the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
-       the initial root table size constants.  See the comments in inftrees.h
-       for more information.
-
-       sym increments through all symbols, and the loop terminates when
-       all codes of length max, i.e. all codes, have been processed.  This
-       routine permits incomplete codes, so another loop after this one fills
-       in the rest of the decoding tables with invalid code markers.
-     */
-
-    /* set up for code type */
-    switch (type) {
-    case CODES:
-        base = extra = work;    /* dummy value--not used */
-        end = 19;
-        break;
-    case LENS:
-        base = lbase;
-        base -= 257;
-        extra = lext;
-        extra -= 257;
-        end = 256;
-        break;
-    default:            /* DISTS */
-        base = dbase;
-        extra = dext;
-        end = -1;
-    }
-
-    /* initialize state for loop */
-    huff = 0;                   /* starting code */
-    sym = 0;                    /* starting code symbol */
-    len = min;                  /* starting code length */
-    next = *table;              /* current table to fill in */
-    curr = root;                /* current table index bits */
-    drop = 0;                   /* current bits to drop from code for index */
-    low = (unsigned)(-1);       /* trigger new sub-table when len > root */
-    used = 1U << root;          /* use root table entries */
-    mask = used - 1;            /* mask for comparing low */
-
-    /* check available table space */
-    if ((type == LENS && used > ENOUGH_LENS) ||
-        (type == DISTS && used > ENOUGH_DISTS))
-        return 1;
-
-    /* process all codes and make table entries */
-    for (;;) {
-        /* create table entry */
-        here.bits = (unsigned char)(len - drop);
-        if ((int)(work[sym]) < end) {
-            here.op = (unsigned char)0;
-            here.val = work[sym];
-        }
-        else if ((int)(work[sym]) > end) {
-            here.op = (unsigned char)(extra[work[sym]]);
-            here.val = base[work[sym]];
-        }
-        else {
-            here.op = (unsigned char)(32 + 64);         /* end of block */
-            here.val = 0;
-        }
-
-        /* replicate for those indices with low len bits equal to huff */
-        incr = 1U << (len - drop);
-        fill = 1U << curr;
-        min = fill;                 /* save offset to next table */
-        do {
-            fill -= incr;
-            next[(huff >> drop) + fill] = here;
-        } while (fill != 0);
-
-        /* backwards increment the len-bit code huff */
-        incr = 1U << (len - 1);
-        while (huff & incr)
-            incr >>= 1;
-        if (incr != 0) {
-            huff &= incr - 1;
-            huff += incr;
-        }
-        else
-            huff = 0;
-
-        /* go to next symbol, update count, len */
-        sym++;
-        if (--(count[len]) == 0) {
-            if (len == max) break;
-            len = lens[work[sym]];
-        }
-
-        /* create new sub-table if needed */
-        if (len > root && (huff & mask) != low) {
-            /* if first time, transition to sub-tables */
-            if (drop == 0)
-                drop = root;
-
-            /* increment past last table */
-            next += min;            /* here min is 1 << curr */
-
-            /* determine length of next table */
-            curr = len - drop;
-            left = (int)(1 << curr);
-            while (curr + drop < max) {
-                left -= count[curr + drop];
-                if (left <= 0) break;
-                curr++;
-                left <<= 1;
-            }
-
-            /* check for enough space */
-            used += 1U << curr;
-            if ((type == LENS && used > ENOUGH_LENS) ||
-                (type == DISTS && used > ENOUGH_DISTS))
-                return 1;
-
-            /* point entry in root table to sub-table */
-            low = huff & mask;
-            (*table)[low].op = (unsigned char)curr;
-            (*table)[low].bits = (unsigned char)root;
-            (*table)[low].val = (unsigned short)(next - *table);
-        }
-    }
-
-    /* fill in remaining table entry if code is incomplete (guaranteed to have
-       at most one remaining entry, since if the code is incomplete, the
-       maximum code length that was allowed to get this far is one bit) */
-    if (huff != 0) {
-        here.op = (unsigned char)64;            /* invalid code marker */
-        here.bits = (unsigned char)(len - drop);
-        here.val = (unsigned short)0;
-        next[huff] = here;
-    }
-
-    /* set return parameters */
-    *table += used;
-    *bits = root;
-    return 0;
-}

package/PackageResources/tools/VRMScrambler/Source/Library/zlib/inftrees.c.meta

@@ -1,27 +0,0 @@
-fileFormatVersion: 2
-guid: 02a7a3ad452bb3c4fb3c7de88b9e7d83
-PluginImporter:
-  externalObjects: {}
-  serializedVersion: 2
-  iconMap: {}
-  executionOrder: {}
-  defineConstraints: []
-  isPreloaded: 0
-  isOverridable: 1
-  isExplicitlyReferenced: 0
-  validateReferences: 1
-  platformData:
-  - first:
-      Any: 
-    second:
-      enabled: 1
-      settings: {}
-  - first:
-      Editor: Editor
-    second:
-      enabled: 0
-      settings:
-        DefaultValueInitialized: true
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 

package/PackageResources/tools/VRMScrambler/Source/Library/zlib/inftrees.h

@@ -1,62 +0,0 @@
-/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-2005, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* Structure for decoding tables.  Each entry provides either the
-   information needed to do the operation requested by the code that
-   indexed that table entry, or it provides a pointer to another
-   table that indexes more bits of the code.  op indicates whether
-   the entry is a pointer to another table, a literal, a length or
-   distance, an end-of-block, or an invalid code.  For a table
-   pointer, the low four bits of op is the number of index bits of
-   that table.  For a length or distance, the low four bits of op
-   is the number of extra bits to get after the code.  bits is
-   the number of bits in this code or part of the code to drop off
-   of the bit buffer.  val is the actual byte to output in the case
-   of a literal, the base length or distance, or the offset from
-   the current table to the next table.  Each entry is four bytes. */
-typedef struct {
-    unsigned char op;           /* operation, extra bits, table bits */
-    unsigned char bits;         /* bits in this part of the code */
-    unsigned short val;         /* offset in table or code value */
-} code;
-
-/* op values as set by inflate_table():
-    00000000 - literal
-    0000tttt - table link, tttt != 0 is the number of table index bits
-    0001eeee - length or distance, eeee is the number of extra bits
-    01100000 - end of block
-    01000000 - invalid code
- */
-
-/* Maximum size of the dynamic table.  The maximum number of code structures is
-   1444, which is the sum of 852 for literal/length codes and 592 for distance
-   codes.  These values were found by exhaustive searches using the program
-   examples/enough.c found in the zlib distribtution.  The arguments to that
-   program are the number of symbols, the initial root table size, and the
-   maximum bit length of a code.  "enough 286 9 15" for literal/length codes
-   returns returns 852, and "enough 30 6 15" for distance codes returns 592.
-   The initial root table size (9 or 6) is found in the fifth argument of the
-   inflate_table() calls in inflate.c and infback.c.  If the root table size is
-   changed, then these maximum sizes would be need to be recalculated and
-   updated. */
-#define ENOUGH_LENS 852
-#define ENOUGH_DISTS 592
-#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)
-
-/* Type of code to build for inflate_table() */
-typedef enum {
-    CODES,
-    LENS,
-    DISTS
-} codetype;
-
-int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
-                             unsigned codes, code FAR * FAR *table,
-                             unsigned FAR *bits, unsigned short FAR *work));

package/PackageResources/tools/VRMScrambler/Source/Library/zlib/inftrees.h.meta

@@ -1,27 +0,0 @@
-fileFormatVersion: 2
-guid: 61b51df9e72adf049ab8163bb5b9aa7f
-PluginImporter:
-  externalObjects: {}
-  serializedVersion: 2
-  iconMap: {}
-  executionOrder: {}
-  defineConstraints: []
-  isPreloaded: 0
-  isOverridable: 1
-  isExplicitlyReferenced: 0
-  validateReferences: 1
-  platformData:
-  - first:
-      Any: 
-    second:
-      enabled: 1
-      settings: {}
-  - first:
-      Editor: Editor
-    second:
-      enabled: 0
-      settings:
-        DefaultValueInitialized: true
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: