cdk-lambda-subminute 2.0.442 → 2.0.443

package/node_modules/aws-sdk/clients/personalize.d.ts

@@ -35,6 +35,14 @@ declare class Personalize extends Service {
    *   You incur campaign costs while it is active. To avoid unnecessary costs, make sure to delete the campaign when you are finished. For information about campaign costs, see Amazon Personalize pricing.  Creates a campaign that deploys a solution version. When a client calls the GetRecommendations and GetPersonalizedRanking APIs, a campaign is specified in the request.  Minimum Provisioned TPS and Auto-Scaling    A high minProvisionedTPS will increase your cost. We recommend starting with 1 for minProvisionedTPS (the default). Track your usage using Amazon CloudWatch metrics, and increase the minProvisionedTPS as necessary.   When you create an Amazon Personalize campaign, you can specify the minimum provisioned transactions per second (minProvisionedTPS) for the campaign. This is the baseline transaction throughput for the campaign provisioned by Amazon Personalize. It sets the minimum billing charge for the campaign while it is active. A transaction is a single GetRecommendations or GetPersonalizedRanking request. The default minProvisionedTPS is 1.  If your TPS increases beyond the minProvisionedTPS, Amazon Personalize auto-scales the provisioned capacity up and down, but never below minProvisionedTPS. There's a short time delay while the capacity is increased that might cause loss of transactions. When your traffic reduces, capacity returns to the minProvisionedTPS.  You are charged for the the minimum provisioned TPS or, if your requests exceed the minProvisionedTPS, the actual TPS. The actual TPS is the total number of recommendation requests you make. We recommend starting with a low minProvisionedTPS, track your usage using Amazon CloudWatch metrics, and then increase the minProvisionedTPS as necessary. For more information about campaign costs, see Amazon Personalize pricing.  Status  A campaign can be in one of the following states:   CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED   DELETE PENDING > DELETE IN_PROGRESS   To get the campaign status, call DescribeCampaign.  Wait until the status of the campaign is ACTIVE before asking the campaign for recommendations.   Related APIs     ListCampaigns     DescribeCampaign     UpdateCampaign     DeleteCampaign   
    */
   createCampaign(callback?: (err: AWSError, data: Personalize.Types.CreateCampaignResponse) => void): Request<Personalize.Types.CreateCampaignResponse, AWSError>;
+  /**
+   * Creates a batch job that deletes all references to specific users from an Amazon Personalize dataset group in batches. You specify the users to delete in a CSV file of userIds in an Amazon S3 bucket. After a job completes, Amazon Personalize no longer trains on the users’ data and no longer considers the users when generating user segments. For more information about creating a data deletion job, see Deleting users.   Your input file must be a CSV file with a single USER_ID column that lists the users IDs. For more information about preparing the CSV file, see Preparing your data deletion file and uploading it to Amazon S3.   To give Amazon Personalize permission to access your input CSV file of userIds, you must specify an IAM service role that has permission to read from the data source. This role needs GetObject and ListBucket permissions for the bucket and its content. These permissions are the same as importing data. For information on granting access to your Amazon S3 bucket, see Giving Amazon Personalize Access to Amazon S3 Resources.     After you create a job, it can take up to a day to delete all references to the users from datasets and models. Until the job completes, Amazon Personalize continues to use the data when training. And if you use a User Segmentation recipe, the users might appear in user segments.   Status  A data deletion job can have one of the following statuses:   PENDING &gt; IN_PROGRESS &gt; COMPLETED -or- FAILED   To get the status of the data deletion job, call DescribeDataDeletionJob API operation and specify the Amazon Resource Name (ARN) of the job. If the status is FAILED, the response includes a failureReason key, which describes why the job failed.  Related APIs     ListDataDeletionJobs     DescribeDataDeletionJob   
+   */
+  createDataDeletionJob(params: Personalize.Types.CreateDataDeletionJobRequest, callback?: (err: AWSError, data: Personalize.Types.CreateDataDeletionJobResponse) => void): Request<Personalize.Types.CreateDataDeletionJobResponse, AWSError>;
+  /**
+   * Creates a batch job that deletes all references to specific users from an Amazon Personalize dataset group in batches. You specify the users to delete in a CSV file of userIds in an Amazon S3 bucket. After a job completes, Amazon Personalize no longer trains on the users’ data and no longer considers the users when generating user segments. For more information about creating a data deletion job, see Deleting users.   Your input file must be a CSV file with a single USER_ID column that lists the users IDs. For more information about preparing the CSV file, see Preparing your data deletion file and uploading it to Amazon S3.   To give Amazon Personalize permission to access your input CSV file of userIds, you must specify an IAM service role that has permission to read from the data source. This role needs GetObject and ListBucket permissions for the bucket and its content. These permissions are the same as importing data. For information on granting access to your Amazon S3 bucket, see Giving Amazon Personalize Access to Amazon S3 Resources.     After you create a job, it can take up to a day to delete all references to the users from datasets and models. Until the job completes, Amazon Personalize continues to use the data when training. And if you use a User Segmentation recipe, the users might appear in user segments.   Status  A data deletion job can have one of the following statuses:   PENDING &gt; IN_PROGRESS &gt; COMPLETED -or- FAILED   To get the status of the data deletion job, call DescribeDataDeletionJob API operation and specify the Amazon Resource Name (ARN) of the job. If the status is FAILED, the response includes a failureReason key, which describes why the job failed.  Related APIs     ListDataDeletionJobs     DescribeDataDeletionJob   
+   */
+  createDataDeletionJob(callback?: (err: AWSError, data: Personalize.Types.CreateDataDeletionJobResponse) => void): Request<Personalize.Types.CreateDataDeletionJobResponse, AWSError>;
   /**
    * Creates an empty dataset and adds it to the specified dataset group. Use CreateDatasetImportJob to import your training data to a dataset. There are 5 types of datasets:   Item interactions   Items   Users   Action interactions   Actions   Each dataset type has an associated schema with required field types. Only the Item interactions dataset is required in order to train a model (also referred to as creating a solution). A dataset can be in one of the following states:   CREATE PENDING &gt; CREATE IN_PROGRESS &gt; ACTIVE -or- CREATE FAILED   DELETE PENDING &gt; DELETE IN_PROGRESS   To get the status of the dataset, call DescribeDataset.  Related APIs     CreateDatasetGroup     ListDatasets     DescribeDataset     DeleteDataset   
    */
@@ -227,6 +235,14 @@ declare class Personalize extends Service {
    * Describes the given campaign, including its status. A campaign can be in one of the following states:   CREATE PENDING &gt; CREATE IN_PROGRESS &gt; ACTIVE -or- CREATE FAILED   DELETE PENDING &gt; DELETE IN_PROGRESS   When the status is CREATE FAILED, the response includes the failureReason key, which describes why. For more information on campaigns, see CreateCampaign.
    */
   describeCampaign(callback?: (err: AWSError, data: Personalize.Types.DescribeCampaignResponse) => void): Request<Personalize.Types.DescribeCampaignResponse, AWSError>;
+  /**
+   * Describes the data deletion job created by CreateDataDeletionJob, including the job status.
+   */
+  describeDataDeletionJob(params: Personalize.Types.DescribeDataDeletionJobRequest, callback?: (err: AWSError, data: Personalize.Types.DescribeDataDeletionJobResponse) => void): Request<Personalize.Types.DescribeDataDeletionJobResponse, AWSError>;
+  /**
+   * Describes the data deletion job created by CreateDataDeletionJob, including the job status.
+   */
+  describeDataDeletionJob(callback?: (err: AWSError, data: Personalize.Types.DescribeDataDeletionJobResponse) => void): Request<Personalize.Types.DescribeDataDeletionJobResponse, AWSError>;
   /**
    * Describes the given dataset. For more information on datasets, see CreateDataset.
    */
@@ -363,6 +379,14 @@ declare class Personalize extends Service {
    * Returns a list of campaigns that use the given solution. When a solution is not specified, all the campaigns associated with the account are listed. The response provides the properties for each campaign, including the Amazon Resource Name (ARN). For more information on campaigns, see CreateCampaign.
    */
   listCampaigns(callback?: (err: AWSError, data: Personalize.Types.ListCampaignsResponse) => void): Request<Personalize.Types.ListCampaignsResponse, AWSError>;
+  /**
+   * Returns a list of data deletion jobs for a dataset group ordered by creation time, with the most recent first. When a dataset group is not specified, all the data deletion jobs associated with the account are listed. The response provides the properties for each job, including the Amazon Resource Name (ARN). For more information on data deletion jobs, see Deleting users.
+   */
+  listDataDeletionJobs(params: Personalize.Types.ListDataDeletionJobsRequest, callback?: (err: AWSError, data: Personalize.Types.ListDataDeletionJobsResponse) => void): Request<Personalize.Types.ListDataDeletionJobsResponse, AWSError>;
+  /**
+   * Returns a list of data deletion jobs for a dataset group ordered by creation time, with the most recent first. When a dataset group is not specified, all the data deletion jobs associated with the account are listed. The response provides the properties for each job, including the Amazon Resource Name (ARN). For more information on data deletion jobs, see Deleting users.
+   */
+  listDataDeletionJobs(callback?: (err: AWSError, data: Personalize.Types.ListDataDeletionJobsResponse) => void): Request<Personalize.Types.ListDataDeletionJobsResponse, AWSError>;
   /**
    * Returns a list of dataset export jobs that use the given dataset. When a dataset is not specified, all the dataset export jobs associated with the account are listed. The response provides the properties for each dataset export job, including the Amazon Resource Name (ARN). For more information on dataset export jobs, see CreateDatasetExportJob. For more information on datasets, see CreateDataset.
    */
@@ -1090,6 +1114,34 @@ declare namespace Personalize {
      */
     campaignArn?: Arn;
   }
+  export interface CreateDataDeletionJobRequest {
+    /**
+     * The name for the data deletion job.
+     */
+    jobName: Name;
+    /**
+     * The Amazon Resource Name (ARN) of the dataset group that has the datasets you want to delete records from.
+     */
+    datasetGroupArn: Arn;
+    /**
+     * The Amazon S3 bucket that contains the list of userIds of the users to delete.
+     */
+    dataSource: DataSource;
+    /**
+     * The Amazon Resource Name (ARN) of the IAM role that has permissions to read from the Amazon S3 data source.
+     */
+    roleArn: RoleArn;
+    /**
+     * A list of tags to apply to the data deletion job.
+     */
+    tags?: Tags;
+  }
+  export interface CreateDataDeletionJobResponse {
+    /**
+     * The Amazon Resource Name (ARN) of the data deletion job.
+     */
+    dataDeletionJobArn?: Arn;
+  }
   export interface CreateDatasetExportJobRequest {
     /**
      * The name for the dataset export job.
@@ -1406,9 +1458,79 @@ declare namespace Personalize {
      */
     solutionVersionArn?: Arn;
   }
+  export interface DataDeletionJob {
+    /**
+     * The name of the data deletion job.
+     */
+    jobName?: Name;
+    /**
+     * The Amazon Resource Name (ARN) of the data deletion job.
+     */
+    dataDeletionJobArn?: Arn;
+    /**
+     * The Amazon Resource Name (ARN) of the dataset group the job deletes records from.
+     */
+    datasetGroupArn?: Arn;
+    dataSource?: DataSource;
+    /**
+     * The Amazon Resource Name (ARN) of the IAM role that has permissions to read from the Amazon S3 data source.
+     */
+    roleArn?: RoleArn;
+    /**
+     * The status of the data deletion job. A data deletion job can have one of the following statuses:   PENDING &gt; IN_PROGRESS &gt; COMPLETED -or- FAILED  
+     */
+    status?: Status;
+    /**
+     * The number of records deleted by a COMPLETED job.
+     */
+    numDeleted?: Integer;
+    /**
+     * The creation date and time (in Unix time) of the data deletion job.
+     */
+    creationDateTime?: _Date;
+    /**
+     * The date and time (in Unix time) the data deletion job was last updated.
+     */
+    lastUpdatedDateTime?: _Date;
+    /**
+     * If a data deletion job fails, provides the reason why.
+     */
+    failureReason?: FailureReason;
+  }
+  export interface DataDeletionJobSummary {
+    /**
+     * The Amazon Resource Name (ARN) of the data deletion job.
+     */
+    dataDeletionJobArn?: Arn;
+    /**
+     * The Amazon Resource Name (ARN) of the dataset group the job deleted records from.
+     */
+    datasetGroupArn?: Arn;
+    /**
+     * The name of the data deletion job.
+     */
+    jobName?: Name;
+    /**
+     * The status of the data deletion job. A data deletion job can have one of the following statuses:   PENDING &gt; IN_PROGRESS &gt; COMPLETED -or- FAILED  
+     */
+    status?: Status;
+    /**
+     * The creation date and time (in Unix time) of the data deletion job.
+     */
+    creationDateTime?: _Date;
+    /**
+     * The date and time (in Unix time) the data deletion job was last updated.
+     */
+    lastUpdatedDateTime?: _Date;
+    /**
+     * If a data deletion job fails, provides the reason why.
+     */
+    failureReason?: FailureReason;
+  }
+  export type DataDeletionJobs = DataDeletionJobSummary[];
   export interface DataSource {
     /**
-     * The path to the Amazon S3 bucket where the data that you want to upload to your dataset is stored. For example:   s3://bucket-name/folder-name/ 
+     * For dataset import jobs, the path to the Amazon S3 bucket where the data that you want to upload to your dataset is stored. For data deletion jobs, the path to the Amazon S3 bucket that stores the list of records to delete.   For example:   s3://bucket-name/folder-name/fileName.csv  If your CSV files are in a folder in your Amazon S3 bucket and you want your import job or data deletion job to consider multiple files, you can specify the path to the folder. With a data deletion job, Amazon Personalize uses all files in the folder and any sub folder. Use the following syntax with a / after the folder name:  s3://bucket-name/folder-name/ 
      */
     dataLocation?: S3Location;
   }
@@ -1940,6 +2062,18 @@ declare namespace Personalize {
      */
     campaign?: Campaign;
   }
+  export interface DescribeDataDeletionJobRequest {
+    /**
+     * The Amazon Resource Name (ARN) of the data deletion job.
+     */
+    dataDeletionJobArn: Arn;
+  }
+  export interface DescribeDataDeletionJobResponse {
+    /**
+     * Information about the data deletion job, including the status. The status is one of the following values:   PENDING   IN_PROGRESS   COMPLETED   FAILED  
+     */
+    dataDeletionJob?: DataDeletionJob;
+  }
   export interface DescribeDatasetExportJobRequest {
     /**
      * The Amazon Resource Name (ARN) of the dataset export job to describe.
@@ -2333,6 +2467,7 @@ declare namespace Personalize {
   export type HyperParameters = {[key: string]: ParameterValue};
   export type ImportMode = "FULL"|"INCREMENTAL"|string;
   export type IngestionMode = "BULK"|"PUT"|"ALL"|string;
+  export type Integer = number;
   export interface IntegerHyperParameterRange {
     /**
      * The name of the hyperparameter.
@@ -2424,6 +2559,30 @@ declare namespace Personalize {
      */
     nextToken?: NextToken;
   }
+  export interface ListDataDeletionJobsRequest {
+    /**
+     * The Amazon Resource Name (ARN) of the dataset group to list data deletion jobs for.
+     */
+    datasetGroupArn?: Arn;
+    /**
+     * A token returned from the previous call to ListDataDeletionJobs for getting the next set of jobs (if they exist).
+     */
+    nextToken?: NextToken;
+    /**
+     * The maximum number of data deletion jobs to return.
+     */
+    maxResults?: MaxResults;
+  }
+  export interface ListDataDeletionJobsResponse {
+    /**
+     * The list of data deletion jobs.
+     */
+    dataDeletionJobs?: DataDeletionJobs;
+    /**
+     * A token for getting the next set of data deletion jobs (if they exist).
+     */
+    nextToken?: NextToken;
+  }
   export interface ListDatasetExportJobsRequest {
     /**
      * The Amazon Resource Name (ARN) of the dataset to list the dataset export jobs for.

package/node_modules/aws-sdk/clients/personalizeruntime.d.ts

@@ -209,6 +209,10 @@ declare namespace PersonalizeRuntime {
      * Metadata about the item from your Items dataset.
      */
     metadata?: Metadata;
+    /**
+     * If you use User-Personalization-v2, a list of reasons for why the item was included in recommendations. Possible reasons include the following:   Promoted item - Indicates the item was included as part of a promotion that you applied in your recommendation request.   Exploration - Indicates the item was included with exploration. With exploration, recommendations include items with less interactions data or relevance for the user. For more information about exploration, see Exploration.    Popular item - Indicates the item was included as a placeholder popular item. If you use a filter, depending on how many recommendations the filter removes, Amazon Personalize might add placeholder items to meet the numResults for your recommendation request. These items are popular items, based on interactions data, that satisfy your filter criteria. They don't have a relevance score for the user.   
+     */
+    reason?: ReasonList;
   }
   export interface Promotion {
     /**
@@ -229,6 +233,8 @@ declare namespace PersonalizeRuntime {
     filterValues?: FilterValues;
   }
   export type PromotionList = Promotion[];
+  export type Reason = string;
+  export type ReasonList = Reason[];
   export type RecommendationID = string;
   export type Score = number;
   export type UserID = string;

package/node_modules/aws-sdk/clients/pi.d.ts

@@ -118,7 +118,7 @@ declare class PI extends Service {
 }
 declare namespace PI {
   export type AcceptLanguage = "EN_US"|string;
-  export type AdditionalMetricsList = RequestString[];
+  export type AdditionalMetricsList = SanitizedString[];
   export type AdditionalMetricsMap = {[key: string]: Double};
   export type AmazonResourceName = string;
   export interface AnalysisReport {
@@ -184,6 +184,7 @@ declare namespace PI {
   }
   export type AnalysisReportSummaryList = AnalysisReportSummary[];
   export type AnalysisStatus = "RUNNING"|"SUCCEEDED"|"FAILED"|string;
+  export type AuthorizedActionsList = FineGrainedAction[];
   export type Boolean = boolean;
   export type ContextType = "CAUSAL"|"CONTEXTUAL"|string;
   export interface CreatePerformanceAnalysisReportRequest {
@@ -286,7 +287,7 @@ declare namespace PI {
      */
     PartitionBy?: DimensionGroup;
     /**
-     * One or more filters to apply in the request. Restrictions:   Any number of filters by the same dimension, as specified in the GroupBy or Partition parameters.   A single filter for any other dimension in this dimension group.  
+     * One or more filters to apply in the request. Restrictions:   Any number of filters by the same dimension, as specified in the GroupBy or Partition parameters.   A single filter for any other dimension in this dimension group.    The db.sql.db_id filter isn't available for RDS for SQL Server DB instances. 
      */
     Filter?: MetricQueryFilterMap;
     /**
@@ -335,11 +336,11 @@ declare namespace PI {
     /**
      * The name of the dimension group. Valid values are as follows:    db - The name of the database to which the client is connected. The following values are permitted:   Aurora PostgreSQL   Amazon RDS PostgreSQL   Aurora MySQL   Amazon RDS MySQL   Amazon RDS MariaDB   Amazon DocumentDB      db.application - The name of the application that is connected to the database. The following values are permitted:   Aurora PostgreSQL   Amazon RDS PostgreSQL   Amazon DocumentDB      db.host - The host name of the connected client (all engines).    db.query - The query that is currently running (only Amazon DocumentDB).    db.query_tokenized - The digest query (only Amazon DocumentDB).    db.session_type - The type of the current session (only Aurora PostgreSQL and RDS PostgreSQL).    db.sql - The text of the SQL statement that is currently running (all engines except Amazon DocumentDB).    db.sql_tokenized - The SQL digest (all engines except Amazon DocumentDB).    db.user - The user logged in to the database (all engines except Amazon DocumentDB).    db.wait_event - The event for which the database backend is waiting (all engines except Amazon DocumentDB).    db.wait_event_type - The type of event for which the database backend is waiting (all engines except Amazon DocumentDB).    db.wait_state - The event for which the database backend is waiting (only Amazon DocumentDB).  
      */
-    Group: RequestString;
+    Group: SanitizedString;
     /**
      * A list of specific dimensions from a dimension group. If this parameter is not present, then it signifies that all of the dimensions in the group were requested, or are present in the response. Valid values for elements in the Dimensions array are:    db.application.name - The name of the application that is connected to the database. Valid values are as follows:    Aurora PostgreSQL   Amazon RDS PostgreSQL   Amazon DocumentDB      db.host.id - The host ID of the connected client (all engines).    db.host.name - The host name of the connected client (all engines).    db.name - The name of the database to which the client is connected. Valid values are as follows:   Aurora PostgreSQL   Amazon RDS PostgreSQL   Aurora MySQL   Amazon RDS MySQL   Amazon RDS MariaDB   Amazon DocumentDB      db.query.id - The query ID generated by Performance Insights (only Amazon DocumentDB).    db.query.db_id - The query ID generated by the database (only Amazon DocumentDB).    db.query.statement - The text of the query that is being run (only Amazon DocumentDB).    db.query.tokenized_id     db.query.tokenized.id - The query digest ID generated by Performance Insights (only Amazon DocumentDB).    db.query.tokenized.db_id - The query digest ID generated by Performance Insights (only Amazon DocumentDB).    db.query.tokenized.statement - The text of the query digest (only Amazon DocumentDB).    db.session_type.name - The type of the current session (only Amazon DocumentDB).    db.sql.id - The hash of the full, non-tokenized SQL statement generated by Performance Insights (all engines except Amazon DocumentDB).    db.sql.db_id - Either the SQL ID generated by the database engine, or a value generated by Performance Insights that begins with pi- (all engines except Amazon DocumentDB).    db.sql.statement - The full text of the SQL statement that is running, as in SELECT * FROM employees (all engines except Amazon DocumentDB)    db.sql.tokenized_id     db.sql_tokenized.id - The hash of the SQL digest generated by Performance Insights (all engines except Amazon DocumentDB). In the console, db.sql_tokenized.id is called the Support ID because Amazon Web Services Support can look at this data to help you troubleshoot database issues.    db.sql_tokenized.db_id - Either the native database ID used to refer to the SQL statement, or a synthetic ID such as pi-2372568224 that Performance Insights generates if the native database ID isn't available (all engines except Amazon DocumentDB).    db.sql_tokenized.statement - The text of the SQL digest, as in SELECT * FROM employees WHERE employee_id = ? (all engines except Amazon DocumentDB)    db.user.id - The ID of the user logged in to the database (all engines except Amazon DocumentDB).    db.user.name - The name of the user logged in to the database (all engines except Amazon DocumentDB).    db.wait_event.name - The event for which the backend is waiting (all engines except Amazon DocumentDB).    db.wait_event.type - The type of event for which the backend is waiting (all engines except Amazon DocumentDB).    db.wait_event_type.name - The name of the event type for which the backend is waiting (all engines except Amazon DocumentDB).    db.wait_state.name - The event for which the backend is waiting (only Amazon DocumentDB).  
      */
-    Dimensions?: RequestStringList;
+    Dimensions?: SanitizedStringList;
     /**
      * The maximum number of items to fetch for this dimension group.
      */
@@ -391,7 +392,7 @@ declare namespace PI {
   }
   export type DimensionKeyDetailList = DimensionKeyDetail[];
   export type DimensionMap = {[key: string]: RequestString};
-  export type DimensionsMetricList = RequestString[];
+  export type DimensionsMetricList = SanitizedString[];
   export type Double = number;
   export interface FeatureMetadata {
     /**
@@ -401,6 +402,7 @@ declare namespace PI {
   }
   export type FeatureMetadataMap = {[key: string]: FeatureMetadata};
   export type FeatureStatus = "ENABLED"|"DISABLED"|"UNSUPPORTED"|"ENABLED_PENDING_REBOOT"|"DISABLED_PENDING_REBOOT"|"UNKNOWN"|string;
+  export type FineGrainedAction = "DescribeDimensionKeys"|"GetDimensionKeyDetails"|"GetResourceMetrics"|string;
   export interface GetDimensionKeyDetailsRequest {
     /**
      * The Amazon Web Services service for which Performance Insights returns data. The only valid value is RDS.
@@ -609,6 +611,10 @@ declare namespace PI {
      * An optional pagination token provided by a previous request. If this parameter is specified, the response includes only records beyond the token, up to the value specified by MaxRecords. 
      */
     NextToken?: NextToken;
+    /**
+     * The actions to discover the dimensions you are authorized to access. If you specify multiple actions, then the response will contain the dimensions common for all the actions. When you don't specify this request parameter or provide an empty list, the response contains all the available dimensions for the target database engine whether or not you are authorized to access them.
+     */
+    AuthorizedActions?: AuthorizedActionsList;
   }
   export interface ListAvailableResourceDimensionsResponse {
     /**
@@ -728,19 +734,19 @@ declare namespace PI {
     /**
      * The name of a Performance Insights metric to be measured. Valid values for Metric are:    db.load.avg - A scaled representation of the number of active sessions for the database engine.    db.sampledload.avg - The raw number of active sessions for the database engine.   The counter metrics listed in Performance Insights operating system counters in the Amazon Aurora User Guide.   The counter metrics listed in Performance Insights operating system counters in the Amazon RDS User Guide.   If the number of active sessions is less than an internal Performance Insights threshold, db.load.avg and db.sampledload.avg are the same value. If the number of active sessions is greater than the internal threshold, Performance Insights samples the active sessions, with db.load.avg showing the scaled values, db.sampledload.avg showing the raw values, and db.sampledload.avg less than db.load.avg. For most use cases, you can query db.load.avg only.
      */
-    Metric: RequestString;
+    Metric: SanitizedString;
     /**
      * A specification for how to aggregate the data points from a query result. You must specify a valid dimension group. Performance Insights will return all of the dimensions within that group, unless you provide the names of specific dimensions within that group. You can also request that Performance Insights return a limited number of values for a dimension.
      */
     GroupBy?: DimensionGroup;
     /**
-     * One or more filters to apply in the request. Restrictions:   Any number of filters by the same dimension, as specified in the GroupBy parameter.   A single filter for any other dimension in this dimension group.  
+     * One or more filters to apply in the request. Restrictions:   Any number of filters by the same dimension, as specified in the GroupBy parameter.   A single filter for any other dimension in this dimension group.    The db.sql.db_id filter isn't available for RDS for SQL Server DB instances. 
      */
     Filter?: MetricQueryFilterMap;
   }
   export type MetricQueryFilterMap = {[key: string]: RequestString};
   export type MetricQueryList = MetricQuery[];
-  export type MetricTypeList = RequestString[];
+  export type MetricTypeList = SanitizedString[];
   export type MetricValuesList = Double[];
   export type NextToken = string;
   export interface PerformanceInsightsMetric {
@@ -774,8 +780,7 @@ declare namespace PI {
   }
   export type RecommendationList = Recommendation[];
   export type RequestString = string;
-  export type RequestStringList = RequestString[];
-  export type RequestedDimensionList = RequestString[];
+  export type RequestedDimensionList = SanitizedString[];
   export interface ResponsePartitionKey {
     /**
      * A dimension map that contains the dimensions for this partition.
@@ -808,6 +813,8 @@ declare namespace PI {
     Dimensions?: DimensionMap;
   }
   export type ResponseResourceMetricList = ResponseResourceMetric[];
+  export type SanitizedString = string;
+  export type SanitizedStringList = SanitizedString[];
   export type ServiceType = "RDS"|"DOCDB"|string;
   export type Severity = "LOW"|"MEDIUM"|"HIGH"|string;
   export type String = string;

package/node_modules/aws-sdk/clients/pinpoint.d.ts

@@ -2024,6 +2024,10 @@ declare namespace Pinpoint {
      * The verified email address to send the email from. The default address is the FromAddress specified for the email channel for the application.
      */
     FromAddress?: __string;
+    /**
+     * The list of MessageHeaders for the email. You can have up to 15 MessageHeaders for each email.
+     */
+    Headers?: ListOfMessageHeader;
     /**
      * The body of the email, in HTML format, for recipients whose email clients render HTML content.
      */
@@ -3064,6 +3068,10 @@ declare namespace Pinpoint {
      * The subject line, or title, to use in email messages that are based on the message template.
      */
     Subject?: __string;
+    /**
+     * The list of MessageHeaders for the email. You can have up to 15 Headers.
+     */
+    Headers?: ListOfMessageHeader;
     /**
      * As of 22-05-2023 tags has been deprecated for update operations. After this date any value in tags is not processed and an error code is not returned. To manage tags we recommend using either Tags in the API Reference for Amazon Pinpoint, resourcegroupstaggingapi commands in the AWS Command Line Interface Documentation or resourcegroupstaggingapi in the AWS SDK. (Deprecated) A string-to-string map of key-value pairs that defines the tags to associate with the message template. Each tag consists of a required tag key and an associated tag value.
      */
@@ -3106,6 +3114,10 @@ declare namespace Pinpoint {
      * The subject line, or title, that's used in email messages that are based on the message template.
      */
     Subject?: __string;
+    /**
+     * The list of MessageHeaders for the email. You can have up to 15 Headers.
+     */
+    Headers?: ListOfMessageHeader;
     /**
      * A string-to-string map of key-value pairs that identifies the tags that are associated with the message template. Each tag consists of a required tag key and an associated tag value.
      */
@@ -6595,6 +6607,21 @@ declare namespace Pinpoint {
      * The body of the email message, in plain text format. We recommend using plain text format for email clients that don't render HTML content and clients that are connected to high-latency networks, such as mobile devices.
      */
     TextPart?: SimpleEmailPart;
+    /**
+     * The list of MessageHeaders for the email. You can have up to 15 Headers.
+     */
+    Headers?: ListOfMessageHeader;
+  }
+  export type ListOfMessageHeader = MessageHeader[];
+  export interface MessageHeader {
+    /**
+     * The name of the message header. The header name can contain up to 126 characters.
+     */
+    Name?: __string;
+    /**
+     * The value of the message header. The header value can contain up to 870 characters, including the length of any rendered attributes. For example if you add the {CreationDate} attribute, it renders as YYYY-MM-DDTHH:MM:SS.SSSZ and is 24 characters in length.
+     */
+    Value?: __string;
   }
   export interface SimpleEmailPart {
     /**