cdk-lambda-subminute 2.0.226 → 2.0.228

package/node_modules/aws-sdk/clients/ses.d.ts

@@ -29,11 +29,11 @@ declare class SES extends Service {
    */
   createConfigurationSet(callback?: (err: AWSError, data: SES.Types.CreateConfigurationSetResponse) => void): Request<SES.Types.CreateConfigurationSetResponse, AWSError>;
   /**
-   * Creates a configuration set event destination.  When you create or update an event destination, you must provide one, and only one, destination. The destination can be CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS).  An event destination is the AWS service to which Amazon SES publishes the email sending events associated with a configuration set. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Creates a configuration set event destination.  When you create or update an event destination, you must provide one, and only one, destination. The destination can be CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS).  An event destination is the Amazon Web Services service to which Amazon SES publishes the email sending events associated with a configuration set. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   createConfigurationSetEventDestination(params: SES.Types.CreateConfigurationSetEventDestinationRequest, callback?: (err: AWSError, data: SES.Types.CreateConfigurationSetEventDestinationResponse) => void): Request<SES.Types.CreateConfigurationSetEventDestinationResponse, AWSError>;
   /**
-   * Creates a configuration set event destination.  When you create or update an event destination, you must provide one, and only one, destination. The destination can be CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS).  An event destination is the AWS service to which Amazon SES publishes the email sending events associated with a configuration set. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Creates a configuration set event destination.  When you create or update an event destination, you must provide one, and only one, destination. The destination can be CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS).  An event destination is the Amazon Web Services service to which Amazon SES publishes the email sending events associated with a configuration set. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   createConfigurationSetEventDestination(callback?: (err: AWSError, data: SES.Types.CreateConfigurationSetEventDestinationResponse) => void): Request<SES.Types.CreateConfigurationSetEventDestinationResponse, AWSError>;
   /**
@@ -77,11 +77,11 @@ declare class SES extends Service {
    */
   createReceiptRuleSet(callback?: (err: AWSError, data: SES.Types.CreateReceiptRuleSetResponse) => void): Request<SES.Types.CreateReceiptRuleSetResponse, AWSError>;
   /**
-   * Creates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Creates an email template. Email templates enable you to send personalized email to one or more destinations in a single operation. For more information, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   createTemplate(params: SES.Types.CreateTemplateRequest, callback?: (err: AWSError, data: SES.Types.CreateTemplateResponse) => void): Request<SES.Types.CreateTemplateResponse, AWSError>;
   /**
-   * Creates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Creates an email template. Email templates enable you to send personalized email to one or more destinations in a single operation. For more information, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   createTemplate(callback?: (err: AWSError, data: SES.Types.CreateTemplateResponse) => void): Request<SES.Types.CreateTemplateResponse, AWSError>;
   /**
@@ -101,11 +101,11 @@ declare class SES extends Service {
    */
   deleteConfigurationSetEventDestination(callback?: (err: AWSError, data: SES.Types.DeleteConfigurationSetEventDestinationResponse) => void): Request<SES.Types.DeleteConfigurationSetEventDestinationResponse, AWSError>;
   /**
-   * Deletes an association between a configuration set and a custom domain for open and click event tracking. By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using custom domains, see the Amazon SES Developer Guide.  Deleting this kind of association will result in emails sent using the specified configuration set to capture open and click events using the standard, Amazon SES-operated domains. 
+   * Deletes an association between a configuration set and a custom domain for open and click event tracking. By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using custom domains, see the Amazon SES Developer Guide.  Deleting this kind of association results in emails sent using the specified configuration set to capture open and click events using the standard, Amazon SES-operated domains. 
    */
   deleteConfigurationSetTrackingOptions(params: SES.Types.DeleteConfigurationSetTrackingOptionsRequest, callback?: (err: AWSError, data: SES.Types.DeleteConfigurationSetTrackingOptionsResponse) => void): Request<SES.Types.DeleteConfigurationSetTrackingOptionsResponse, AWSError>;
   /**
-   * Deletes an association between a configuration set and a custom domain for open and click event tracking. By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using custom domains, see the Amazon SES Developer Guide.  Deleting this kind of association will result in emails sent using the specified configuration set to capture open and click events using the standard, Amazon SES-operated domains. 
+   * Deletes an association between a configuration set and a custom domain for open and click event tracking. By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using custom domains, see the Amazon SES Developer Guide.  Deleting this kind of association results in emails sent using the specified configuration set to capture open and click events using the standard, Amazon SES-operated domains. 
    */
   deleteConfigurationSetTrackingOptions(callback?: (err: AWSError, data: SES.Types.DeleteConfigurationSetTrackingOptionsResponse) => void): Request<SES.Types.DeleteConfigurationSetTrackingOptionsResponse, AWSError>;
   /**
@@ -125,11 +125,11 @@ declare class SES extends Service {
    */
   deleteIdentity(callback?: (err: AWSError, data: SES.Types.DeleteIdentityResponse) => void): Request<SES.Types.DeleteIdentityResponse, AWSError>;
   /**
-   * Deletes the specified sending authorization policy for the given identity (an email address or a domain). This API returns successfully even if a policy with the specified name does not exist.  This API is for the identity owner only. If you have not verified the identity, this API will return an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Deletes the specified sending authorization policy for the given identity (an email address or a domain). This operation returns successfully even if a policy with the specified name does not exist.  This operation is for the identity owner only. If you have not verified the identity, it returns an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   deleteIdentityPolicy(params: SES.Types.DeleteIdentityPolicyRequest, callback?: (err: AWSError, data: SES.Types.DeleteIdentityPolicyResponse) => void): Request<SES.Types.DeleteIdentityPolicyResponse, AWSError>;
   /**
-   * Deletes the specified sending authorization policy for the given identity (an email address or a domain). This API returns successfully even if a policy with the specified name does not exist.  This API is for the identity owner only. If you have not verified the identity, this API will return an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Deletes the specified sending authorization policy for the given identity (an email address or a domain). This operation returns successfully even if a policy with the specified name does not exist.  This operation is for the identity owner only. If you have not verified the identity, it returns an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   deleteIdentityPolicy(callback?: (err: AWSError, data: SES.Types.DeleteIdentityPolicyResponse) => void): Request<SES.Types.DeleteIdentityPolicyResponse, AWSError>;
   /**
@@ -205,7 +205,7 @@ declare class SES extends Service {
    */
   describeReceiptRuleSet(callback?: (err: AWSError, data: SES.Types.DescribeReceiptRuleSetResponse) => void): Request<SES.Types.DescribeReceiptRuleSetResponse, AWSError>;
   /**
-   * Returns the email sending status of the Amazon SES account for the current region. You can execute this operation no more than once per second.
+   * Returns the email sending status of the Amazon SES account for the current Region. You can execute this operation no more than once per second.
    */
   getAccountSendingEnabled(callback?: (err: AWSError, data: SES.Types.GetAccountSendingEnabledResponse) => void): Request<SES.Types.GetAccountSendingEnabledResponse, AWSError>;
   /**
@@ -241,19 +241,19 @@ declare class SES extends Service {
    */
   getIdentityNotificationAttributes(callback?: (err: AWSError, data: SES.Types.GetIdentityNotificationAttributesResponse) => void): Request<SES.Types.GetIdentityNotificationAttributesResponse, AWSError>;
   /**
-   * Returns the requested sending authorization policies for the given identity (an email address or a domain). The policies are returned as a map of policy names to policy contents. You can retrieve a maximum of 20 policies at a time.  This API is for the identity owner only. If you have not verified the identity, this API will return an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Returns the requested sending authorization policies for the given identity (an email address or a domain). The policies are returned as a map of policy names to policy contents. You can retrieve a maximum of 20 policies at a time.  This operation is for the identity owner only. If you have not verified the identity, it returns an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   getIdentityPolicies(params: SES.Types.GetIdentityPoliciesRequest, callback?: (err: AWSError, data: SES.Types.GetIdentityPoliciesResponse) => void): Request<SES.Types.GetIdentityPoliciesResponse, AWSError>;
   /**
-   * Returns the requested sending authorization policies for the given identity (an email address or a domain). The policies are returned as a map of policy names to policy contents. You can retrieve a maximum of 20 policies at a time.  This API is for the identity owner only. If you have not verified the identity, this API will return an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Returns the requested sending authorization policies for the given identity (an email address or a domain). The policies are returned as a map of policy names to policy contents. You can retrieve a maximum of 20 policies at a time.  This operation is for the identity owner only. If you have not verified the identity, it returns an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   getIdentityPolicies(callback?: (err: AWSError, data: SES.Types.GetIdentityPoliciesResponse) => void): Request<SES.Types.GetIdentityPoliciesResponse, AWSError>;
   /**
-   * Given a list of identities (email addresses and/or domains), returns the verification status and (for domain identities) the verification token for each identity. The verification status of an email address is "Pending" until the email address owner clicks the link within the verification email that Amazon SES sent to that address. If the email address owner clicks the link within 24 hours, the verification status of the email address changes to "Success". If the link is not clicked within 24 hours, the verification status changes to "Failed." In that case, if you still want to verify the email address, you must restart the verification process from the beginning. For domain identities, the domain's verification status is "Pending" as Amazon SES searches for the required TXT record in the DNS settings of the domain. When Amazon SES detects the record, the domain's verification status changes to "Success". If Amazon SES is unable to detect the record within 72 hours, the domain's verification status changes to "Failed." In that case, if you still want to verify the domain, you must restart the verification process from the beginning. This operation is throttled at one request per second and can only get verification attributes for up to 100 identities at a time.
+   * Given a list of identities (email addresses and/or domains), returns the verification status and (for domain identities) the verification token for each identity. The verification status of an email address is "Pending" until the email address owner clicks the link within the verification email that Amazon SES sent to that address. If the email address owner clicks the link within 24 hours, the verification status of the email address changes to "Success". If the link is not clicked within 24 hours, the verification status changes to "Failed." In that case, to verify the email address, you must restart the verification process from the beginning. For domain identities, the domain's verification status is "Pending" as Amazon SES searches for the required TXT record in the DNS settings of the domain. When Amazon SES detects the record, the domain's verification status changes to "Success". If Amazon SES is unable to detect the record within 72 hours, the domain's verification status changes to "Failed." In that case, to verify the domain, you must restart the verification process from the beginning. This operation is throttled at one request per second and can only get verification attributes for up to 100 identities at a time.
    */
   getIdentityVerificationAttributes(params: SES.Types.GetIdentityVerificationAttributesRequest, callback?: (err: AWSError, data: SES.Types.GetIdentityVerificationAttributesResponse) => void): Request<SES.Types.GetIdentityVerificationAttributesResponse, AWSError>;
   /**
-   * Given a list of identities (email addresses and/or domains), returns the verification status and (for domain identities) the verification token for each identity. The verification status of an email address is "Pending" until the email address owner clicks the link within the verification email that Amazon SES sent to that address. If the email address owner clicks the link within 24 hours, the verification status of the email address changes to "Success". If the link is not clicked within 24 hours, the verification status changes to "Failed." In that case, if you still want to verify the email address, you must restart the verification process from the beginning. For domain identities, the domain's verification status is "Pending" as Amazon SES searches for the required TXT record in the DNS settings of the domain. When Amazon SES detects the record, the domain's verification status changes to "Success". If Amazon SES is unable to detect the record within 72 hours, the domain's verification status changes to "Failed." In that case, if you still want to verify the domain, you must restart the verification process from the beginning. This operation is throttled at one request per second and can only get verification attributes for up to 100 identities at a time.
+   * Given a list of identities (email addresses and/or domains), returns the verification status and (for domain identities) the verification token for each identity. The verification status of an email address is "Pending" until the email address owner clicks the link within the verification email that Amazon SES sent to that address. If the email address owner clicks the link within 24 hours, the verification status of the email address changes to "Success". If the link is not clicked within 24 hours, the verification status changes to "Failed." In that case, to verify the email address, you must restart the verification process from the beginning. For domain identities, the domain's verification status is "Pending" as Amazon SES searches for the required TXT record in the DNS settings of the domain. When Amazon SES detects the record, the domain's verification status changes to "Success". If Amazon SES is unable to detect the record within 72 hours, the domain's verification status changes to "Failed." In that case, to verify the domain, you must restart the verification process from the beginning. This operation is throttled at one request per second and can only get verification attributes for up to 100 identities at a time.
    */
   getIdentityVerificationAttributes(callback?: (err: AWSError, data: SES.Types.GetIdentityVerificationAttributesResponse) => void): Request<SES.Types.GetIdentityVerificationAttributesResponse, AWSError>;
   /**
@@ -261,7 +261,7 @@ declare class SES extends Service {
    */
   getSendQuota(callback?: (err: AWSError, data: SES.Types.GetSendQuotaResponse) => void): Request<SES.Types.GetSendQuotaResponse, AWSError>;
   /**
-   * Provides sending statistics for the current AWS Region. The result is a list of data points, representing the last two weeks of sending activity. Each data point in the list contains statistics for a 15-minute period of time. You can execute this operation no more than once per second.
+   * Provides sending statistics for the current Amazon Web Services Region. The result is a list of data points, representing the last two weeks of sending activity. Each data point in the list contains statistics for a 15-minute period of time. You can execute this operation no more than once per second.
    */
   getSendStatistics(callback?: (err: AWSError, data: SES.Types.GetSendStatisticsResponse) => void): Request<SES.Types.GetSendStatisticsResponse, AWSError>;
   /**
@@ -273,59 +273,59 @@ declare class SES extends Service {
    */
   getTemplate(callback?: (err: AWSError, data: SES.Types.GetTemplateResponse) => void): Request<SES.Types.GetTemplateResponse, AWSError>;
   /**
-   * Provides a list of the configuration sets associated with your Amazon SES account in the current AWS Region. For information about using configuration sets, see Monitoring Your Amazon SES Sending Activity in the Amazon SES Developer Guide.  You can execute this operation no more than once per second. This operation will return up to 1,000 configuration sets each time it is run. If your Amazon SES account has more than 1,000 configuration sets, this operation will also return a NextToken element. You can then execute the ListConfigurationSets operation again, passing the NextToken parameter and the value of the NextToken element to retrieve additional results.
+   * Provides a list of the configuration sets associated with your Amazon SES account in the current Amazon Web Services Region. For information about using configuration sets, see Monitoring Your Amazon SES Sending Activity in the Amazon SES Developer Guide.  You can execute this operation no more than once per second. This operation returns up to 1,000 configuration sets each time it is run. If your Amazon SES account has more than 1,000 configuration sets, this operation also returns NextToken. You can then execute the ListConfigurationSets operation again, passing the NextToken parameter and the value of the NextToken element to retrieve additional results.
    */
   listConfigurationSets(params: SES.Types.ListConfigurationSetsRequest, callback?: (err: AWSError, data: SES.Types.ListConfigurationSetsResponse) => void): Request<SES.Types.ListConfigurationSetsResponse, AWSError>;
   /**
-   * Provides a list of the configuration sets associated with your Amazon SES account in the current AWS Region. For information about using configuration sets, see Monitoring Your Amazon SES Sending Activity in the Amazon SES Developer Guide.  You can execute this operation no more than once per second. This operation will return up to 1,000 configuration sets each time it is run. If your Amazon SES account has more than 1,000 configuration sets, this operation will also return a NextToken element. You can then execute the ListConfigurationSets operation again, passing the NextToken parameter and the value of the NextToken element to retrieve additional results.
+   * Provides a list of the configuration sets associated with your Amazon SES account in the current Amazon Web Services Region. For information about using configuration sets, see Monitoring Your Amazon SES Sending Activity in the Amazon SES Developer Guide.  You can execute this operation no more than once per second. This operation returns up to 1,000 configuration sets each time it is run. If your Amazon SES account has more than 1,000 configuration sets, this operation also returns NextToken. You can then execute the ListConfigurationSets operation again, passing the NextToken parameter and the value of the NextToken element to retrieve additional results.
    */
   listConfigurationSets(callback?: (err: AWSError, data: SES.Types.ListConfigurationSetsResponse) => void): Request<SES.Types.ListConfigurationSetsResponse, AWSError>;
   /**
-   * Lists the existing custom verification email templates for your account in the current AWS Region. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Lists the existing custom verification email templates for your account in the current Amazon Web Services Region. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   listCustomVerificationEmailTemplates(params: SES.Types.ListCustomVerificationEmailTemplatesRequest, callback?: (err: AWSError, data: SES.Types.ListCustomVerificationEmailTemplatesResponse) => void): Request<SES.Types.ListCustomVerificationEmailTemplatesResponse, AWSError>;
   /**
-   * Lists the existing custom verification email templates for your account in the current AWS Region. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Lists the existing custom verification email templates for your account in the current Amazon Web Services Region. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   listCustomVerificationEmailTemplates(callback?: (err: AWSError, data: SES.Types.ListCustomVerificationEmailTemplatesResponse) => void): Request<SES.Types.ListCustomVerificationEmailTemplatesResponse, AWSError>;
   /**
-   * Returns a list containing all of the identities (email addresses and domains) for your AWS account in the current AWS Region, regardless of verification status. You can execute this operation no more than once per second.
+   * Returns a list containing all of the identities (email addresses and domains) for your Amazon Web Services account in the current Amazon Web Services Region, regardless of verification status. You can execute this operation no more than once per second.  It's recommended that for successive pagination calls of this API, you continue to the use the same parameter/value pairs as used in the original call, e.g., if you used IdentityType=Domain in the the original call and received a NextToken in the response, you should continue providing the IdentityType=Domain parameter for further NextToken calls; however, if you didn't provide the IdentityType parameter in the original call, then continue to not provide it for successive pagination calls. Using this protocol will ensure consistent results. 
    */
   listIdentities(params: SES.Types.ListIdentitiesRequest, callback?: (err: AWSError, data: SES.Types.ListIdentitiesResponse) => void): Request<SES.Types.ListIdentitiesResponse, AWSError>;
   /**
-   * Returns a list containing all of the identities (email addresses and domains) for your AWS account in the current AWS Region, regardless of verification status. You can execute this operation no more than once per second.
+   * Returns a list containing all of the identities (email addresses and domains) for your Amazon Web Services account in the current Amazon Web Services Region, regardless of verification status. You can execute this operation no more than once per second.  It's recommended that for successive pagination calls of this API, you continue to the use the same parameter/value pairs as used in the original call, e.g., if you used IdentityType=Domain in the the original call and received a NextToken in the response, you should continue providing the IdentityType=Domain parameter for further NextToken calls; however, if you didn't provide the IdentityType parameter in the original call, then continue to not provide it for successive pagination calls. Using this protocol will ensure consistent results. 
    */
   listIdentities(callback?: (err: AWSError, data: SES.Types.ListIdentitiesResponse) => void): Request<SES.Types.ListIdentitiesResponse, AWSError>;
   /**
-   * Returns a list of sending authorization policies that are attached to the given identity (an email address or a domain). This API returns only a list. If you want the actual policy content, you can use GetIdentityPolicies.  This API is for the identity owner only. If you have not verified the identity, this API will return an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Returns a list of sending authorization policies that are attached to the given identity (an email address or a domain). This operation returns only a list. To get the actual policy content, use GetIdentityPolicies.  This operation is for the identity owner only. If you have not verified the identity, it returns an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   listIdentityPolicies(params: SES.Types.ListIdentityPoliciesRequest, callback?: (err: AWSError, data: SES.Types.ListIdentityPoliciesResponse) => void): Request<SES.Types.ListIdentityPoliciesResponse, AWSError>;
   /**
-   * Returns a list of sending authorization policies that are attached to the given identity (an email address or a domain). This API returns only a list. If you want the actual policy content, you can use GetIdentityPolicies.  This API is for the identity owner only. If you have not verified the identity, this API will return an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Returns a list of sending authorization policies that are attached to the given identity (an email address or a domain). This operation returns only a list. To get the actual policy content, use GetIdentityPolicies.  This operation is for the identity owner only. If you have not verified the identity, it returns an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   listIdentityPolicies(callback?: (err: AWSError, data: SES.Types.ListIdentityPoliciesResponse) => void): Request<SES.Types.ListIdentityPoliciesResponse, AWSError>;
   /**
-   * Lists the IP address filters associated with your AWS account in the current AWS Region. For information about managing IP address filters, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Lists the IP address filters associated with your Amazon Web Services account in the current Amazon Web Services Region. For information about managing IP address filters, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   listReceiptFilters(params: SES.Types.ListReceiptFiltersRequest, callback?: (err: AWSError, data: SES.Types.ListReceiptFiltersResponse) => void): Request<SES.Types.ListReceiptFiltersResponse, AWSError>;
   /**
-   * Lists the IP address filters associated with your AWS account in the current AWS Region. For information about managing IP address filters, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Lists the IP address filters associated with your Amazon Web Services account in the current Amazon Web Services Region. For information about managing IP address filters, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   listReceiptFilters(callback?: (err: AWSError, data: SES.Types.ListReceiptFiltersResponse) => void): Request<SES.Types.ListReceiptFiltersResponse, AWSError>;
   /**
-   * Lists the receipt rule sets that exist under your AWS account in the current AWS Region. If there are additional receipt rule sets to be retrieved, you will receive a NextToken that you can provide to the next call to ListReceiptRuleSets to retrieve the additional entries. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Lists the receipt rule sets that exist under your Amazon Web Services account in the current Amazon Web Services Region. If there are additional receipt rule sets to be retrieved, you receive a NextToken that you can provide to the next call to ListReceiptRuleSets to retrieve the additional entries. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   listReceiptRuleSets(params: SES.Types.ListReceiptRuleSetsRequest, callback?: (err: AWSError, data: SES.Types.ListReceiptRuleSetsResponse) => void): Request<SES.Types.ListReceiptRuleSetsResponse, AWSError>;
   /**
-   * Lists the receipt rule sets that exist under your AWS account in the current AWS Region. If there are additional receipt rule sets to be retrieved, you will receive a NextToken that you can provide to the next call to ListReceiptRuleSets to retrieve the additional entries. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Lists the receipt rule sets that exist under your Amazon Web Services account in the current Amazon Web Services Region. If there are additional receipt rule sets to be retrieved, you receive a NextToken that you can provide to the next call to ListReceiptRuleSets to retrieve the additional entries. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   listReceiptRuleSets(callback?: (err: AWSError, data: SES.Types.ListReceiptRuleSetsResponse) => void): Request<SES.Types.ListReceiptRuleSetsResponse, AWSError>;
   /**
-   * Lists the email templates present in your Amazon SES account in the current AWS Region. You can execute this operation no more than once per second.
+   * Lists the email templates present in your Amazon SES account in the current Amazon Web Services Region. You can execute this operation no more than once per second.
    */
   listTemplates(params: SES.Types.ListTemplatesRequest, callback?: (err: AWSError, data: SES.Types.ListTemplatesResponse) => void): Request<SES.Types.ListTemplatesResponse, AWSError>;
   /**
-   * Lists the email templates present in your Amazon SES account in the current AWS Region. You can execute this operation no more than once per second.
+   * Lists the email templates present in your Amazon SES account in the current Amazon Web Services Region. You can execute this operation no more than once per second.
    */
   listTemplates(callback?: (err: AWSError, data: SES.Types.ListTemplatesResponse) => void): Request<SES.Types.ListTemplatesResponse, AWSError>;
   /**
@@ -341,75 +341,75 @@ declare class SES extends Service {
    */
   putConfigurationSetDeliveryOptions(callback?: (err: AWSError, data: SES.Types.PutConfigurationSetDeliveryOptionsResponse) => void): Request<SES.Types.PutConfigurationSetDeliveryOptionsResponse, AWSError>;
   /**
-   * Adds or updates a sending authorization policy for the specified identity (an email address or a domain).  This API is for the identity owner only. If you have not verified the identity, this API will return an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Adds or updates a sending authorization policy for the specified identity (an email address or a domain).  This operation is for the identity owner only. If you have not verified the identity, it returns an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   putIdentityPolicy(params: SES.Types.PutIdentityPolicyRequest, callback?: (err: AWSError, data: SES.Types.PutIdentityPolicyResponse) => void): Request<SES.Types.PutIdentityPolicyResponse, AWSError>;
   /**
-   * Adds or updates a sending authorization policy for the specified identity (an email address or a domain).  This API is for the identity owner only. If you have not verified the identity, this API will return an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Adds or updates a sending authorization policy for the specified identity (an email address or a domain).  This operation is for the identity owner only. If you have not verified the identity, it returns an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   putIdentityPolicy(callback?: (err: AWSError, data: SES.Types.PutIdentityPolicyResponse) => void): Request<SES.Types.PutIdentityPolicyResponse, AWSError>;
   /**
-   * Reorders the receipt rules within a receipt rule set.  All of the rules in the rule set must be represented in this request. That is, this API will return an error if the reorder request doesn't explicitly position all of the rules.  For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Reorders the receipt rules within a receipt rule set.  All of the rules in the rule set must be represented in this request. That is, it is error if the reorder request doesn't explicitly position all of the rules.  For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   reorderReceiptRuleSet(params: SES.Types.ReorderReceiptRuleSetRequest, callback?: (err: AWSError, data: SES.Types.ReorderReceiptRuleSetResponse) => void): Request<SES.Types.ReorderReceiptRuleSetResponse, AWSError>;
   /**
-   * Reorders the receipt rules within a receipt rule set.  All of the rules in the rule set must be represented in this request. That is, this API will return an error if the reorder request doesn't explicitly position all of the rules.  For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Reorders the receipt rules within a receipt rule set.  All of the rules in the rule set must be represented in this request. That is, it is error if the reorder request doesn't explicitly position all of the rules.  For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   reorderReceiptRuleSet(callback?: (err: AWSError, data: SES.Types.ReorderReceiptRuleSetResponse) => void): Request<SES.Types.ReorderReceiptRuleSetResponse, AWSError>;
   /**
-   * Generates and sends a bounce message to the sender of an email you received through Amazon SES. You can only use this API on an email up to 24 hours after you receive it.  You cannot use this API to send generic bounces for mail that was not received by Amazon SES.  For information about receiving email through Amazon SES, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Generates and sends a bounce message to the sender of an email you received through Amazon SES. You can only use this operation on an email up to 24 hours after you receive it.  You cannot use this operation to send generic bounces for mail that was not received by Amazon SES.  For information about receiving email through Amazon SES, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   sendBounce(params: SES.Types.SendBounceRequest, callback?: (err: AWSError, data: SES.Types.SendBounceResponse) => void): Request<SES.Types.SendBounceResponse, AWSError>;
   /**
-   * Generates and sends a bounce message to the sender of an email you received through Amazon SES. You can only use this API on an email up to 24 hours after you receive it.  You cannot use this API to send generic bounces for mail that was not received by Amazon SES.  For information about receiving email through Amazon SES, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Generates and sends a bounce message to the sender of an email you received through Amazon SES. You can only use this operation on an email up to 24 hours after you receive it.  You cannot use this operation to send generic bounces for mail that was not received by Amazon SES.  For information about receiving email through Amazon SES, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   sendBounce(callback?: (err: AWSError, data: SES.Types.SendBounceResponse) => void): Request<SES.Types.SendBounceResponse, AWSError>;
   /**
-   * Composes an email message to multiple destinations. The message body is created using an email template. In order to send email using the SendBulkTemplatedEmail operation, your call to the API must meet the following requirements:   The call must refer to an existing email template. You can create email templates using the CreateTemplate operation.   The message must be sent from a verified email address or domain.   If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.    The maximum message size is 10 MB.   Each Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.   The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendBulkTemplatedEmail operation several times to send the message to each group.   The number of destinations you can contact in a single call to the API may be limited by your account's maximum sending rate.  
+   * Composes an email message to multiple destinations. The message body is created using an email template. To send email using this operation, your call must meet the following requirements:   The call must refer to an existing email template. You can create email templates using CreateTemplate.   The message must be sent from a verified email address or domain.   If your account is still in the Amazon SES sandbox, you may send only to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.    The maximum message size is 10 MB.   Each Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message is rejected, even if the message contains other recipients that are valid.   The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendBulkTemplatedEmail operation several times to send the message to each group.   The number of destinations you can contact in a single call can be limited by your account's maximum sending rate.  
    */
   sendBulkTemplatedEmail(params: SES.Types.SendBulkTemplatedEmailRequest, callback?: (err: AWSError, data: SES.Types.SendBulkTemplatedEmailResponse) => void): Request<SES.Types.SendBulkTemplatedEmailResponse, AWSError>;
   /**
-   * Composes an email message to multiple destinations. The message body is created using an email template. In order to send email using the SendBulkTemplatedEmail operation, your call to the API must meet the following requirements:   The call must refer to an existing email template. You can create email templates using the CreateTemplate operation.   The message must be sent from a verified email address or domain.   If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.    The maximum message size is 10 MB.   Each Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.   The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendBulkTemplatedEmail operation several times to send the message to each group.   The number of destinations you can contact in a single call to the API may be limited by your account's maximum sending rate.  
+   * Composes an email message to multiple destinations. The message body is created using an email template. To send email using this operation, your call must meet the following requirements:   The call must refer to an existing email template. You can create email templates using CreateTemplate.   The message must be sent from a verified email address or domain.   If your account is still in the Amazon SES sandbox, you may send only to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.    The maximum message size is 10 MB.   Each Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message is rejected, even if the message contains other recipients that are valid.   The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendBulkTemplatedEmail operation several times to send the message to each group.   The number of destinations you can contact in a single call can be limited by your account's maximum sending rate.  
    */
   sendBulkTemplatedEmail(callback?: (err: AWSError, data: SES.Types.SendBulkTemplatedEmailResponse) => void): Request<SES.Types.SendBulkTemplatedEmailResponse, AWSError>;
   /**
-   * Adds an email address to the list of identities for your Amazon SES account in the current AWS Region and attempts to verify it. As a result of executing this operation, a customized verification email is sent to the specified address. To use this operation, you must first create a custom verification email template. For more information about creating and using custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Adds an email address to the list of identities for your Amazon SES account in the current Amazon Web Services Region and attempts to verify it. As a result of executing this operation, a customized verification email is sent to the specified address. To use this operation, you must first create a custom verification email template. For more information about creating and using custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   sendCustomVerificationEmail(params: SES.Types.SendCustomVerificationEmailRequest, callback?: (err: AWSError, data: SES.Types.SendCustomVerificationEmailResponse) => void): Request<SES.Types.SendCustomVerificationEmailResponse, AWSError>;
   /**
-   * Adds an email address to the list of identities for your Amazon SES account in the current AWS Region and attempts to verify it. As a result of executing this operation, a customized verification email is sent to the specified address. To use this operation, you must first create a custom verification email template. For more information about creating and using custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Adds an email address to the list of identities for your Amazon SES account in the current Amazon Web Services Region and attempts to verify it. As a result of executing this operation, a customized verification email is sent to the specified address. To use this operation, you must first create a custom verification email template. For more information about creating and using custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   sendCustomVerificationEmail(callback?: (err: AWSError, data: SES.Types.SendCustomVerificationEmailResponse) => void): Request<SES.Types.SendCustomVerificationEmailResponse, AWSError>;
   /**
-   * Composes an email message and immediately queues it for sending. In order to send email using the SendEmail operation, your message must meet the following requirements:   The message must be sent from a verified email address or domain. If you attempt to send email using a non-verified address or domain, the operation will result in an "Email address not verified" error.    If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.    The maximum message size is 10 MB.   The message must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.   The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendEmail operation several times to send the message to each group.    For every message that you send, the total number of recipients (including each recipient in the To:, CC: and BCC: fields) is counted against the maximum number of emails you can send in a 24-hour period (your sending quota). For more information about sending quotas in Amazon SES, see Managing Your Amazon SES Sending Limits in the Amazon SES Developer Guide.  
+   * Composes an email message and immediately queues it for sending. To send email using this operation, your message must meet the following requirements:   The message must be sent from a verified email address or domain. If you attempt to send email using a non-verified address or domain, the operation results in an "Email address not verified" error.    If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.    The maximum message size is 10 MB.   The message must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message is rejected, even if the message contains other recipients that are valid.   The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendEmail operation several times to send the message to each group.    For every message that you send, the total number of recipients (including each recipient in the To:, CC: and BCC: fields) is counted against the maximum number of emails you can send in a 24-hour period (your sending quota). For more information about sending quotas in Amazon SES, see Managing Your Amazon SES Sending Limits in the Amazon SES Developer Guide.  
    */
   sendEmail(params: SES.Types.SendEmailRequest, callback?: (err: AWSError, data: SES.Types.SendEmailResponse) => void): Request<SES.Types.SendEmailResponse, AWSError>;
   /**
-   * Composes an email message and immediately queues it for sending. In order to send email using the SendEmail operation, your message must meet the following requirements:   The message must be sent from a verified email address or domain. If you attempt to send email using a non-verified address or domain, the operation will result in an "Email address not verified" error.    If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.    The maximum message size is 10 MB.   The message must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.   The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendEmail operation several times to send the message to each group.    For every message that you send, the total number of recipients (including each recipient in the To:, CC: and BCC: fields) is counted against the maximum number of emails you can send in a 24-hour period (your sending quota). For more information about sending quotas in Amazon SES, see Managing Your Amazon SES Sending Limits in the Amazon SES Developer Guide.  
+   * Composes an email message and immediately queues it for sending. To send email using this operation, your message must meet the following requirements:   The message must be sent from a verified email address or domain. If you attempt to send email using a non-verified address or domain, the operation results in an "Email address not verified" error.    If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.    The maximum message size is 10 MB.   The message must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message is rejected, even if the message contains other recipients that are valid.   The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendEmail operation several times to send the message to each group.    For every message that you send, the total number of recipients (including each recipient in the To:, CC: and BCC: fields) is counted against the maximum number of emails you can send in a 24-hour period (your sending quota). For more information about sending quotas in Amazon SES, see Managing Your Amazon SES Sending Limits in the Amazon SES Developer Guide.  
    */
   sendEmail(callback?: (err: AWSError, data: SES.Types.SendEmailResponse) => void): Request<SES.Types.SendEmailResponse, AWSError>;
   /**
-   * Composes an email message and immediately queues it for sending. This operation is more flexible than the SendEmail API operation. When you use the SendRawEmail operation, you can specify the headers of the message as well as its content. This flexibility is useful, for example, when you want to send a multipart MIME email (such a message that contains both a text and an HTML version). You can also use this operation to send messages that include attachments. The SendRawEmail operation has the following requirements:   You can only send email from verified email addresses or domains. If you try to send email from an address that isn't verified, the operation results in an "Email address not verified" error.   If your account is still in the Amazon SES sandbox, you can only send email to other verified addresses in your account, or to addresses that are associated with the Amazon SES mailbox simulator.   The maximum message size, including attachments, is 10 MB.   Each message has to include at least one recipient address. A recipient address includes any address on the To:, CC:, or BCC: lines.   If you send a single message to more than one recipient address, and one of the recipient addresses isn't in a valid format (that is, it's not in the format UserName@[SubDomain.]Domain.TopLevelDomain), Amazon SES rejects the entire message, even if the other addresses are valid.   Each message can include up to 50 recipient addresses across the To:, CC:, or BCC: lines. If you need to send a single message to more than 50 recipients, you have to split the list of recipient addresses into groups of less than 50 recipients, and send separate messages to each group.   Amazon SES allows you to specify 8-bit Content-Transfer-Encoding for MIME message parts. However, if Amazon SES has to modify the contents of your message (for example, if you use open and click tracking), 8-bit content isn't preserved. For this reason, we highly recommend that you encode all content that isn't 7-bit ASCII. For more information, see MIME Encoding in the Amazon SES Developer Guide.   Additionally, keep the following considerations in mind when using the SendRawEmail operation:   Although you can customize the message headers when using the SendRawEmail operation, Amazon SES will automatically apply its own Message-ID and Date headers; if you passed these headers when creating the message, they will be overwritten by the values that Amazon SES provides.   If you are using sending authorization to send on behalf of another user, SendRawEmail enables you to specify the cross-account identity for the email's Source, From, and Return-Path parameters in one of two ways: you can pass optional parameters SourceArn, FromArn, and/or ReturnPathArn to the API, or you can include the following X-headers in the header of your raw email:    X-SES-SOURCE-ARN     X-SES-FROM-ARN     X-SES-RETURN-PATH-ARN     Don't include these X-headers in the DKIM signature. Amazon SES removes these before it sends the email.  If you only specify the SourceIdentityArn parameter, Amazon SES sets the From and Return-Path addresses to the same identity that you specified. For more information about sending authorization, see the Using Sending Authorization with Amazon SES in the Amazon SES Developer Guide.    For every message that you send, the total number of recipients (including each recipient in the To:, CC: and BCC: fields) is counted against the maximum number of emails you can send in a 24-hour period (your sending quota). For more information about sending quotas in Amazon SES, see Managing Your Amazon SES Sending Limits in the Amazon SES Developer Guide.   
+   * Composes an email message and immediately queues it for sending. This operation is more flexible than the SendEmail operation. When you use the SendRawEmail operation, you can specify the headers of the message as well as its content. This flexibility is useful, for example, when you need to send a multipart MIME email (such a message that contains both a text and an HTML version). You can also use this operation to send messages that include attachments. The SendRawEmail operation has the following requirements:   You can only send email from verified email addresses or domains. If you try to send email from an address that isn't verified, the operation results in an "Email address not verified" error.   If your account is still in the Amazon SES sandbox, you can only send email to other verified addresses in your account, or to addresses that are associated with the Amazon SES mailbox simulator.   The maximum message size, including attachments, is 10 MB.   Each message has to include at least one recipient address. A recipient address includes any address on the To:, CC:, or BCC: lines.   If you send a single message to more than one recipient address, and one of the recipient addresses isn't in a valid format (that is, it's not in the format UserName@[SubDomain.]Domain.TopLevelDomain), Amazon SES rejects the entire message, even if the other addresses are valid.   Each message can include up to 50 recipient addresses across the To:, CC:, or BCC: lines. If you need to send a single message to more than 50 recipients, you have to split the list of recipient addresses into groups of less than 50 recipients, and send separate messages to each group.   Amazon SES allows you to specify 8-bit Content-Transfer-Encoding for MIME message parts. However, if Amazon SES has to modify the contents of your message (for example, if you use open and click tracking), 8-bit content isn't preserved. For this reason, we highly recommend that you encode all content that isn't 7-bit ASCII. For more information, see MIME Encoding in the Amazon SES Developer Guide.   Additionally, keep the following considerations in mind when using the SendRawEmail operation:   Although you can customize the message headers when using the SendRawEmail operation, Amazon SES automatically applies its own Message-ID and Date headers; if you passed these headers when creating the message, they are overwritten by the values that Amazon SES provides.   If you are using sending authorization to send on behalf of another user, SendRawEmail enables you to specify the cross-account identity for the email's Source, From, and Return-Path parameters in one of two ways: you can pass optional parameters SourceArn, FromArn, and/or ReturnPathArn, or you can include the following X-headers in the header of your raw email:    X-SES-SOURCE-ARN     X-SES-FROM-ARN     X-SES-RETURN-PATH-ARN     Don't include these X-headers in the DKIM signature. Amazon SES removes these before it sends the email.  If you only specify the SourceIdentityArn parameter, Amazon SES sets the From and Return-Path addresses to the same identity that you specified. For more information about sending authorization, see the Using Sending Authorization with Amazon SES in the Amazon SES Developer Guide.    For every message that you send, the total number of recipients (including each recipient in the To:, CC: and BCC: fields) is counted against the maximum number of emails you can send in a 24-hour period (your sending quota). For more information about sending quotas in Amazon SES, see Managing Your Amazon SES Sending Limits in the Amazon SES Developer Guide.   
    */
   sendRawEmail(params: SES.Types.SendRawEmailRequest, callback?: (err: AWSError, data: SES.Types.SendRawEmailResponse) => void): Request<SES.Types.SendRawEmailResponse, AWSError>;
   /**
-   * Composes an email message and immediately queues it for sending. This operation is more flexible than the SendEmail API operation. When you use the SendRawEmail operation, you can specify the headers of the message as well as its content. This flexibility is useful, for example, when you want to send a multipart MIME email (such a message that contains both a text and an HTML version). You can also use this operation to send messages that include attachments. The SendRawEmail operation has the following requirements:   You can only send email from verified email addresses or domains. If you try to send email from an address that isn't verified, the operation results in an "Email address not verified" error.   If your account is still in the Amazon SES sandbox, you can only send email to other verified addresses in your account, or to addresses that are associated with the Amazon SES mailbox simulator.   The maximum message size, including attachments, is 10 MB.   Each message has to include at least one recipient address. A recipient address includes any address on the To:, CC:, or BCC: lines.   If you send a single message to more than one recipient address, and one of the recipient addresses isn't in a valid format (that is, it's not in the format UserName@[SubDomain.]Domain.TopLevelDomain), Amazon SES rejects the entire message, even if the other addresses are valid.   Each message can include up to 50 recipient addresses across the To:, CC:, or BCC: lines. If you need to send a single message to more than 50 recipients, you have to split the list of recipient addresses into groups of less than 50 recipients, and send separate messages to each group.   Amazon SES allows you to specify 8-bit Content-Transfer-Encoding for MIME message parts. However, if Amazon SES has to modify the contents of your message (for example, if you use open and click tracking), 8-bit content isn't preserved. For this reason, we highly recommend that you encode all content that isn't 7-bit ASCII. For more information, see MIME Encoding in the Amazon SES Developer Guide.   Additionally, keep the following considerations in mind when using the SendRawEmail operation:   Although you can customize the message headers when using the SendRawEmail operation, Amazon SES will automatically apply its own Message-ID and Date headers; if you passed these headers when creating the message, they will be overwritten by the values that Amazon SES provides.   If you are using sending authorization to send on behalf of another user, SendRawEmail enables you to specify the cross-account identity for the email's Source, From, and Return-Path parameters in one of two ways: you can pass optional parameters SourceArn, FromArn, and/or ReturnPathArn to the API, or you can include the following X-headers in the header of your raw email:    X-SES-SOURCE-ARN     X-SES-FROM-ARN     X-SES-RETURN-PATH-ARN     Don't include these X-headers in the DKIM signature. Amazon SES removes these before it sends the email.  If you only specify the SourceIdentityArn parameter, Amazon SES sets the From and Return-Path addresses to the same identity that you specified. For more information about sending authorization, see the Using Sending Authorization with Amazon SES in the Amazon SES Developer Guide.    For every message that you send, the total number of recipients (including each recipient in the To:, CC: and BCC: fields) is counted against the maximum number of emails you can send in a 24-hour period (your sending quota). For more information about sending quotas in Amazon SES, see Managing Your Amazon SES Sending Limits in the Amazon SES Developer Guide.   
+   * Composes an email message and immediately queues it for sending. This operation is more flexible than the SendEmail operation. When you use the SendRawEmail operation, you can specify the headers of the message as well as its content. This flexibility is useful, for example, when you need to send a multipart MIME email (such a message that contains both a text and an HTML version). You can also use this operation to send messages that include attachments. The SendRawEmail operation has the following requirements:   You can only send email from verified email addresses or domains. If you try to send email from an address that isn't verified, the operation results in an "Email address not verified" error.   If your account is still in the Amazon SES sandbox, you can only send email to other verified addresses in your account, or to addresses that are associated with the Amazon SES mailbox simulator.   The maximum message size, including attachments, is 10 MB.   Each message has to include at least one recipient address. A recipient address includes any address on the To:, CC:, or BCC: lines.   If you send a single message to more than one recipient address, and one of the recipient addresses isn't in a valid format (that is, it's not in the format UserName@[SubDomain.]Domain.TopLevelDomain), Amazon SES rejects the entire message, even if the other addresses are valid.   Each message can include up to 50 recipient addresses across the To:, CC:, or BCC: lines. If you need to send a single message to more than 50 recipients, you have to split the list of recipient addresses into groups of less than 50 recipients, and send separate messages to each group.   Amazon SES allows you to specify 8-bit Content-Transfer-Encoding for MIME message parts. However, if Amazon SES has to modify the contents of your message (for example, if you use open and click tracking), 8-bit content isn't preserved. For this reason, we highly recommend that you encode all content that isn't 7-bit ASCII. For more information, see MIME Encoding in the Amazon SES Developer Guide.   Additionally, keep the following considerations in mind when using the SendRawEmail operation:   Although you can customize the message headers when using the SendRawEmail operation, Amazon SES automatically applies its own Message-ID and Date headers; if you passed these headers when creating the message, they are overwritten by the values that Amazon SES provides.   If you are using sending authorization to send on behalf of another user, SendRawEmail enables you to specify the cross-account identity for the email's Source, From, and Return-Path parameters in one of two ways: you can pass optional parameters SourceArn, FromArn, and/or ReturnPathArn, or you can include the following X-headers in the header of your raw email:    X-SES-SOURCE-ARN     X-SES-FROM-ARN     X-SES-RETURN-PATH-ARN     Don't include these X-headers in the DKIM signature. Amazon SES removes these before it sends the email.  If you only specify the SourceIdentityArn parameter, Amazon SES sets the From and Return-Path addresses to the same identity that you specified. For more information about sending authorization, see the Using Sending Authorization with Amazon SES in the Amazon SES Developer Guide.    For every message that you send, the total number of recipients (including each recipient in the To:, CC: and BCC: fields) is counted against the maximum number of emails you can send in a 24-hour period (your sending quota). For more information about sending quotas in Amazon SES, see Managing Your Amazon SES Sending Limits in the Amazon SES Developer Guide.   
    */
   sendRawEmail(callback?: (err: AWSError, data: SES.Types.SendRawEmailResponse) => void): Request<SES.Types.SendRawEmailResponse, AWSError>;
   /**
-   * Composes an email message using an email template and immediately queues it for sending. In order to send email using the SendTemplatedEmail operation, your call to the API must meet the following requirements:   The call must refer to an existing email template. You can create email templates using the CreateTemplate operation.   The message must be sent from a verified email address or domain.   If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.    The maximum message size is 10 MB.   Calls to the SendTemplatedEmail operation may only include one Destination parameter. A destination is a set of recipients who will receive the same version of the email. The Destination parameter can include up to 50 recipients, across the To:, CC: and BCC: fields.   The Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.    If your call to the SendTemplatedEmail operation includes all of the required parameters, Amazon SES accepts it and returns a Message ID. However, if Amazon SES can't render the email because the template contains errors, it doesn't send the email. Additionally, because it already accepted the message, Amazon SES doesn't return a message stating that it was unable to send the email. For these reasons, we highly recommend that you set up Amazon SES to send you notifications when Rendering Failure events occur. For more information, see Sending Personalized Email Using the Amazon SES API in the Amazon Simple Email Service Developer Guide. 
+   * Composes an email message using an email template and immediately queues it for sending. To send email using this operation, your call must meet the following requirements:   The call must refer to an existing email template. You can create email templates using the CreateTemplate operation.   The message must be sent from a verified email address or domain.   If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.    The maximum message size is 10 MB.   Calls to the SendTemplatedEmail operation may only include one Destination parameter. A destination is a set of recipients that receives the same version of the email. The Destination parameter can include up to 50 recipients, across the To:, CC: and BCC: fields.   The Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message is rejected, even if the message contains other recipients that are valid.    If your call to the SendTemplatedEmail operation includes all of the required parameters, Amazon SES accepts it and returns a Message ID. However, if Amazon SES can't render the email because the template contains errors, it doesn't send the email. Additionally, because it already accepted the message, Amazon SES doesn't return a message stating that it was unable to send the email. For these reasons, we highly recommend that you set up Amazon SES to send you notifications when Rendering Failure events occur. For more information, see Sending Personalized Email Using the Amazon SES API in the Amazon Simple Email Service Developer Guide. 
    */
   sendTemplatedEmail(params: SES.Types.SendTemplatedEmailRequest, callback?: (err: AWSError, data: SES.Types.SendTemplatedEmailResponse) => void): Request<SES.Types.SendTemplatedEmailResponse, AWSError>;
   /**
-   * Composes an email message using an email template and immediately queues it for sending. In order to send email using the SendTemplatedEmail operation, your call to the API must meet the following requirements:   The call must refer to an existing email template. You can create email templates using the CreateTemplate operation.   The message must be sent from a verified email address or domain.   If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.    The maximum message size is 10 MB.   Calls to the SendTemplatedEmail operation may only include one Destination parameter. A destination is a set of recipients who will receive the same version of the email. The Destination parameter can include up to 50 recipients, across the To:, CC: and BCC: fields.   The Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.    If your call to the SendTemplatedEmail operation includes all of the required parameters, Amazon SES accepts it and returns a Message ID. However, if Amazon SES can't render the email because the template contains errors, it doesn't send the email. Additionally, because it already accepted the message, Amazon SES doesn't return a message stating that it was unable to send the email. For these reasons, we highly recommend that you set up Amazon SES to send you notifications when Rendering Failure events occur. For more information, see Sending Personalized Email Using the Amazon SES API in the Amazon Simple Email Service Developer Guide. 
+   * Composes an email message using an email template and immediately queues it for sending. To send email using this operation, your call must meet the following requirements:   The call must refer to an existing email template. You can create email templates using the CreateTemplate operation.   The message must be sent from a verified email address or domain.   If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.    The maximum message size is 10 MB.   Calls to the SendTemplatedEmail operation may only include one Destination parameter. A destination is a set of recipients that receives the same version of the email. The Destination parameter can include up to 50 recipients, across the To:, CC: and BCC: fields.   The Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message is rejected, even if the message contains other recipients that are valid.    If your call to the SendTemplatedEmail operation includes all of the required parameters, Amazon SES accepts it and returns a Message ID. However, if Amazon SES can't render the email because the template contains errors, it doesn't send the email. Additionally, because it already accepted the message, Amazon SES doesn't return a message stating that it was unable to send the email. For these reasons, we highly recommend that you set up Amazon SES to send you notifications when Rendering Failure events occur. For more information, see Sending Personalized Email Using the Amazon SES API in the Amazon Simple Email Service Developer Guide. 
    */
   sendTemplatedEmail(callback?: (err: AWSError, data: SES.Types.SendTemplatedEmailResponse) => void): Request<SES.Types.SendTemplatedEmailResponse, AWSError>;
   /**
-   * Sets the specified receipt rule set as the active receipt rule set.  To disable your email-receiving through Amazon SES completely, you can call this API with RuleSetName set to null.  For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Sets the specified receipt rule set as the active receipt rule set.  To disable your email-receiving through Amazon SES completely, you can call this operation with RuleSetName set to null.  For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   setActiveReceiptRuleSet(params: SES.Types.SetActiveReceiptRuleSetRequest, callback?: (err: AWSError, data: SES.Types.SetActiveReceiptRuleSetResponse) => void): Request<SES.Types.SetActiveReceiptRuleSetResponse, AWSError>;
   /**
-   * Sets the specified receipt rule set as the active receipt rule set.  To disable your email-receiving through Amazon SES completely, you can call this API with RuleSetName set to null.  For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Sets the specified receipt rule set as the active receipt rule set.  To disable your email-receiving through Amazon SES completely, you can call this operation with RuleSetName set to null.  For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   setActiveReceiptRuleSet(callback?: (err: AWSError, data: SES.Types.SetActiveReceiptRuleSetResponse) => void): Request<SES.Types.SetActiveReceiptRuleSetResponse, AWSError>;
   /**
@@ -437,11 +437,11 @@ declare class SES extends Service {
    */
   setIdentityHeadersInNotificationsEnabled(callback?: (err: AWSError, data: SES.Types.SetIdentityHeadersInNotificationsEnabledResponse) => void): Request<SES.Types.SetIdentityHeadersInNotificationsEnabledResponse, AWSError>;
   /**
-   * Enables or disables the custom MAIL FROM domain setup for a verified identity (an email address or a domain).  To send emails using the specified MAIL FROM domain, you must add an MX record to your MAIL FROM domain's DNS settings. If you want your emails to pass Sender Policy Framework (SPF) checks, you must also add or update an SPF record. For more information, see the Amazon SES Developer Guide.  You can execute this operation no more than once per second.
+   * Enables or disables the custom MAIL FROM domain setup for a verified identity (an email address or a domain).  To send emails using the specified MAIL FROM domain, you must add an MX record to your MAIL FROM domain's DNS settings. To ensure that your emails pass Sender Policy Framework (SPF) checks, you must also add or update an SPF record. For more information, see the Amazon SES Developer Guide.  You can execute this operation no more than once per second.
    */
   setIdentityMailFromDomain(params: SES.Types.SetIdentityMailFromDomainRequest, callback?: (err: AWSError, data: SES.Types.SetIdentityMailFromDomainResponse) => void): Request<SES.Types.SetIdentityMailFromDomainResponse, AWSError>;
   /**
-   * Enables or disables the custom MAIL FROM domain setup for a verified identity (an email address or a domain).  To send emails using the specified MAIL FROM domain, you must add an MX record to your MAIL FROM domain's DNS settings. If you want your emails to pass Sender Policy Framework (SPF) checks, you must also add or update an SPF record. For more information, see the Amazon SES Developer Guide.  You can execute this operation no more than once per second.
+   * Enables or disables the custom MAIL FROM domain setup for a verified identity (an email address or a domain).  To send emails using the specified MAIL FROM domain, you must add an MX record to your MAIL FROM domain's DNS settings. To ensure that your emails pass Sender Policy Framework (SPF) checks, you must also add or update an SPF record. For more information, see the Amazon SES Developer Guide.  You can execute this operation no more than once per second.
    */
   setIdentityMailFromDomain(callback?: (err: AWSError, data: SES.Types.SetIdentityMailFromDomainResponse) => void): Request<SES.Types.SetIdentityMailFromDomainResponse, AWSError>;
   /**
@@ -469,11 +469,11 @@ declare class SES extends Service {
    */
   testRenderTemplate(callback?: (err: AWSError, data: SES.Types.TestRenderTemplateResponse) => void): Request<SES.Types.TestRenderTemplateResponse, AWSError>;
   /**
-   * Enables or disables email sending across your entire Amazon SES account in the current AWS Region. You can use this operation in conjunction with Amazon CloudWatch alarms to temporarily pause email sending across your Amazon SES account in a given AWS Region when reputation metrics (such as your bounce or complaint rates) reach certain thresholds. You can execute this operation no more than once per second.
+   * Enables or disables email sending across your entire Amazon SES account in the current Amazon Web Services Region. You can use this operation in conjunction with Amazon CloudWatch alarms to temporarily pause email sending across your Amazon SES account in a given Amazon Web Services Region when reputation metrics (such as your bounce or complaint rates) reach certain thresholds. You can execute this operation no more than once per second.
    */
   updateAccountSendingEnabled(params: SES.Types.UpdateAccountSendingEnabledRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Enables or disables email sending across your entire Amazon SES account in the current AWS Region. You can use this operation in conjunction with Amazon CloudWatch alarms to temporarily pause email sending across your Amazon SES account in a given AWS Region when reputation metrics (such as your bounce or complaint rates) reach certain thresholds. You can execute this operation no more than once per second.
+   * Enables or disables email sending across your entire Amazon SES account in the current Amazon Web Services Region. You can use this operation in conjunction with Amazon CloudWatch alarms to temporarily pause email sending across your Amazon SES account in a given Amazon Web Services Region when reputation metrics (such as your bounce or complaint rates) reach certain thresholds. You can execute this operation no more than once per second.
    */
   updateAccountSendingEnabled(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -485,19 +485,19 @@ declare class SES extends Service {
    */
   updateConfigurationSetEventDestination(callback?: (err: AWSError, data: SES.Types.UpdateConfigurationSetEventDestinationResponse) => void): Request<SES.Types.UpdateConfigurationSetEventDestinationResponse, AWSError>;
   /**
-   * Enables or disables the publishing of reputation metrics for emails sent using a specific configuration set in a given AWS Region. Reputation metrics include bounce and complaint rates. These metrics are published to Amazon CloudWatch. By using CloudWatch, you can create alarms when bounce or complaint rates exceed certain thresholds. You can execute this operation no more than once per second.
+   * Enables or disables the publishing of reputation metrics for emails sent using a specific configuration set in a given Amazon Web Services Region. Reputation metrics include bounce and complaint rates. These metrics are published to Amazon CloudWatch. By using CloudWatch, you can create alarms when bounce or complaint rates exceed certain thresholds. You can execute this operation no more than once per second.
    */
   updateConfigurationSetReputationMetricsEnabled(params: SES.Types.UpdateConfigurationSetReputationMetricsEnabledRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Enables or disables the publishing of reputation metrics for emails sent using a specific configuration set in a given AWS Region. Reputation metrics include bounce and complaint rates. These metrics are published to Amazon CloudWatch. By using CloudWatch, you can create alarms when bounce or complaint rates exceed certain thresholds. You can execute this operation no more than once per second.
+   * Enables or disables the publishing of reputation metrics for emails sent using a specific configuration set in a given Amazon Web Services Region. Reputation metrics include bounce and complaint rates. These metrics are published to Amazon CloudWatch. By using CloudWatch, you can create alarms when bounce or complaint rates exceed certain thresholds. You can execute this operation no more than once per second.
    */
   updateConfigurationSetReputationMetricsEnabled(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Enables or disables email sending for messages sent using a specific configuration set in a given AWS Region. You can use this operation in conjunction with Amazon CloudWatch alarms to temporarily pause email sending for a configuration set when the reputation metrics for that configuration set (such as your bounce on complaint rate) exceed certain thresholds. You can execute this operation no more than once per second.
+   * Enables or disables email sending for messages sent using a specific configuration set in a given Amazon Web Services Region. You can use this operation in conjunction with Amazon CloudWatch alarms to temporarily pause email sending for a configuration set when the reputation metrics for that configuration set (such as your bounce on complaint rate) exceed certain thresholds. You can execute this operation no more than once per second.
    */
   updateConfigurationSetSendingEnabled(params: SES.Types.UpdateConfigurationSetSendingEnabledRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Enables or disables email sending for messages sent using a specific configuration set in a given AWS Region. You can use this operation in conjunction with Amazon CloudWatch alarms to temporarily pause email sending for a configuration set when the reputation metrics for that configuration set (such as your bounce on complaint rate) exceed certain thresholds. You can execute this operation no more than once per second.
+   * Enables or disables email sending for messages sent using a specific configuration set in a given Amazon Web Services Region. You can use this operation in conjunction with Amazon CloudWatch alarms to temporarily pause email sending for a configuration set when the reputation metrics for that configuration set (such as your bounce on complaint rate) exceed certain thresholds. You can execute this operation no more than once per second.
    */
   updateConfigurationSetSendingEnabled(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -525,11 +525,11 @@ declare class SES extends Service {
    */
   updateReceiptRule(callback?: (err: AWSError, data: SES.Types.UpdateReceiptRuleResponse) => void): Request<SES.Types.UpdateReceiptRuleResponse, AWSError>;
   /**
-   * Updates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Updates an email template. Email templates enable you to send personalized email to one or more destinations in a single operation. For more information, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   updateTemplate(params: SES.Types.UpdateTemplateRequest, callback?: (err: AWSError, data: SES.Types.UpdateTemplateResponse) => void): Request<SES.Types.UpdateTemplateResponse, AWSError>;
   /**
-   * Updates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
+   * Updates an email template. Email templates enable you to send personalized email to one or more destinations in a single operation. For more information, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
    */
   updateTemplate(callback?: (err: AWSError, data: SES.Types.UpdateTemplateResponse) => void): Request<SES.Types.UpdateTemplateResponse, AWSError>;
   /**
@@ -541,11 +541,11 @@ declare class SES extends Service {
    */
   verifyDomainDkim(callback?: (err: AWSError, data: SES.Types.VerifyDomainDkimResponse) => void): Request<SES.Types.VerifyDomainDkimResponse, AWSError>;
   /**
-   * Adds a domain to the list of identities for your Amazon SES account in the current AWS Region and attempts to verify it. For more information about verifying domains, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.  You can execute this operation no more than once per second.
+   * Adds a domain to the list of identities for your Amazon SES account in the current Amazon Web Services Region and attempts to verify it. For more information about verifying domains, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.  You can execute this operation no more than once per second.
    */
   verifyDomainIdentity(params: SES.Types.VerifyDomainIdentityRequest, callback?: (err: AWSError, data: SES.Types.VerifyDomainIdentityResponse) => void): Request<SES.Types.VerifyDomainIdentityResponse, AWSError>;
   /**
-   * Adds a domain to the list of identities for your Amazon SES account in the current AWS Region and attempts to verify it. For more information about verifying domains, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.  You can execute this operation no more than once per second.
+   * Adds a domain to the list of identities for your Amazon SES account in the current Amazon Web Services Region and attempts to verify it. For more information about verifying domains, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.  You can execute this operation no more than once per second.
    */
   verifyDomainIdentity(callback?: (err: AWSError, data: SES.Types.VerifyDomainIdentityResponse) => void): Request<SES.Types.VerifyDomainIdentityResponse, AWSError>;
   /**
@@ -557,11 +557,11 @@ declare class SES extends Service {
    */
   verifyEmailAddress(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Adds an email address to the list of identities for your Amazon SES account in the current AWS region and attempts to verify it. As a result of executing this operation, a verification email is sent to the specified address. You can execute this operation no more than once per second.
+   * Adds an email address to the list of identities for your Amazon SES account in the current Amazon Web Services Region and attempts to verify it. As a result of executing this operation, a verification email is sent to the specified address. You can execute this operation no more than once per second.
    */
   verifyEmailIdentity(params: SES.Types.VerifyEmailIdentityRequest, callback?: (err: AWSError, data: SES.Types.VerifyEmailIdentityResponse) => void): Request<SES.Types.VerifyEmailIdentityResponse, AWSError>;
   /**
-   * Adds an email address to the list of identities for your Amazon SES account in the current AWS region and attempts to verify it. As a result of executing this operation, a verification email is sent to the specified address. You can execute this operation no more than once per second.
+   * Adds an email address to the list of identities for your Amazon SES account in the current Amazon Web Services Region and attempts to verify it. As a result of executing this operation, a verification email is sent to the specified address. You can execute this operation no more than once per second.
    */
   verifyEmailIdentity(callback?: (err: AWSError, data: SES.Types.VerifyEmailIdentityResponse) => void): Request<SES.Types.VerifyEmailIdentityResponse, AWSError>;
   /**
@@ -576,11 +576,11 @@ declare class SES extends Service {
 declare namespace SES {
   export interface AddHeaderAction {
     /**
-     * The name of the header to add. Must be between 1 and 50 characters, inclusive, and consist of alphanumeric (a-z, A-Z, 0-9) characters and dashes only.
+     * The name of the header to add to the incoming message. The name must contain at least one character, and can contain up to 50 characters. It consists of alphanumeric (a–z, A–Z, 0–9) characters and dashes.
      */
     HeaderName: HeaderName;
     /**
-     * Must be less than 2048 characters, and must not contain newline characters ("\r" or "\n").
+     * The content to include in the header. This value can contain up to 2048 characters. It can't contain newline (\n) or carriage return (\r) characters.
      */
     HeaderValue: HeaderValue;
   }
@@ -601,7 +601,7 @@ declare namespace SES {
   }
   export interface BounceAction {
     /**
-     * The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the bounce action is taken. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.
+     * The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the bounce action is taken. You can find the ARN of a topic by using the ListTopics operation in Amazon SNS. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.
      */
     TopicArn?: AmazonResourceName;
     /**
@@ -617,7 +617,7 @@ declare namespace SES {
      */
     Message: BounceMessage;
     /**
-     * The email address of the sender of the bounced email. This is the address from which the bounce message will be sent.
+     * The email address of the sender of the bounced email. This is the address from which the bounce message is sent.
      */
     Sender: Address;
   }
@@ -658,7 +658,7 @@ declare namespace SES {
   export type BulkEmailDestinationList = BulkEmailDestination[];
   export interface BulkEmailDestinationStatus {
     /**
-     * The status of a message sent using the SendBulkTemplatedEmail operation. Possible values for this parameter include:    Success: Amazon SES accepted the message, and will attempt to deliver it to the recipients.    MessageRejected: The message was rejected because it contained a virus.    MailFromDomainNotVerified: The sender's email address or domain was not verified.    ConfigurationSetDoesNotExist: The configuration set you specified does not exist.    TemplateDoesNotExist: The template you specified does not exist.    AccountSuspended: Your account has been shut down because of issues related to your email sending practices.    AccountThrottled: The number of emails you can send has been reduced because your account has exceeded its allocated sending limit.    AccountDailyQuotaExceeded: You have reached or exceeded the maximum number of emails you can send from your account in a 24-hour period.    InvalidSendingPoolName: The configuration set you specified refers to an IP pool that does not exist.    AccountSendingPaused: Email sending for the Amazon SES account was disabled using the UpdateAccountSendingEnabled operation.    ConfigurationSetSendingPaused: Email sending for this configuration set was disabled using the UpdateConfigurationSetSendingEnabled operation.    InvalidParameterValue: One or more of the parameters you specified when calling this operation was invalid. See the error message for additional information.    TransientFailure: Amazon SES was unable to process your request because of a temporary issue.    Failed: Amazon SES was unable to process your request. See the error message for additional information.  
+     * The status of a message sent using the SendBulkTemplatedEmail operation. Possible values for this parameter include:    Success: Amazon SES accepted the message, and attempts to deliver it to the recipients.    MessageRejected: The message was rejected because it contained a virus.    MailFromDomainNotVerified: The sender's email address or domain was not verified.    ConfigurationSetDoesNotExist: The configuration set you specified does not exist.    TemplateDoesNotExist: The template you specified does not exist.    AccountSuspended: Your account has been shut down because of issues related to your email sending practices.    AccountThrottled: The number of emails you can send has been reduced because your account has exceeded its allocated sending limit.    AccountDailyQuotaExceeded: You have reached or exceeded the maximum number of emails you can send from your account in a 24-hour period.    InvalidSendingPoolName: The configuration set you specified refers to an IP pool that does not exist.    AccountSendingPaused: Email sending for the Amazon SES account was disabled using the UpdateAccountSendingEnabled operation.    ConfigurationSetSendingPaused: Email sending for this configuration set was disabled using the UpdateConfigurationSetSendingEnabled operation.    InvalidParameterValue: One or more of the parameters you specified when calling this operation was invalid. See the error message for additional information.    TransientFailure: Amazon SES was unable to process your request because of a temporary issue.    Failed: Amazon SES was unable to process your request. See the error message for additional information.  
      */
     Status?: BulkEmailStatus;
     /**
@@ -676,7 +676,7 @@ declare namespace SES {
   export type Cidr = string;
   export interface CloneReceiptRuleSetRequest {
     /**
-     * The name of the rule set to create. The name must:   This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).   Start and end with a letter or number.   Contain less than 64 characters.  
+     * The name of the rule set to create. The name must meet the following requirements:   Contain only ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).   Start and end with a letter or number.   Contain 64 characters or fewer.  
      */
     RuleSetName: ReceiptRuleSetName;
     /**
@@ -694,15 +694,15 @@ declare namespace SES {
   }
   export interface CloudWatchDimensionConfiguration {
     /**
-     * The name of an Amazon CloudWatch dimension associated with an email sending metric. The name must:   This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).   Contain less than 256 characters.  
+     * The name of an Amazon CloudWatch dimension associated with an email sending metric. The name must meet the following requirements:   Contain only ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), dashes (-), or colons (:).   Contain 256 characters or fewer.  
      */
     DimensionName: DimensionName;
     /**
-     * The place where Amazon SES finds the value of a dimension to publish to Amazon CloudWatch. If you want Amazon SES to use the message tags that you specify using an X-SES-MESSAGE-TAGS header or a parameter to the SendEmail/SendRawEmail API, choose messageTag. If you want Amazon SES to use your own email headers, choose emailHeader.
+     * The place where Amazon SES finds the value of a dimension to publish to Amazon CloudWatch. To use the message tags that you specify using an X-SES-MESSAGE-TAGS header or a parameter to the SendEmail/SendRawEmail API, specify messageTag. To use your own email headers, specify emailHeader. To put a custom tag on any link included in your email, specify linkTag.
      */
     DimensionValueSource: DimensionValueSource;
     /**
-     * The default value of the dimension that is published to Amazon CloudWatch if you do not provide the value of the dimension when you send an email. The default value must:   This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).   Contain less than 256 characters.  
+     * The default value of the dimension that is published to Amazon CloudWatch if you do not provide the value of the dimension when you send an email. The default value must meet the following requirements:   Contain only ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), dashes (-), at signs (@), or periods (.).   Contain 256 characters or fewer.  
      */
     DefaultDimensionValue: DefaultDimensionValue;
   }
@@ -734,7 +734,7 @@ declare namespace SES {
      */
     ConfigurationSetName: ConfigurationSetName;
     /**
-     * An object that describes the AWS service that email sending event information will be published to.
+     * An object that describes the Amazon Web Services service that email sending event where information is published.
      */
     EventDestination: EventDestination;
   }
@@ -793,11 +793,11 @@ declare namespace SES {
   }
   export interface CreateReceiptRuleRequest {
     /**
-     * The name of the rule set that the receipt rule will be added to.
+     * The name of the rule set where the receipt rule is added.
      */
     RuleSetName: ReceiptRuleSetName;
     /**
-     * The name of an existing rule after which the new rule will be placed. If this parameter is null, the new rule will be inserted at the beginning of the rule list.
+     * The name of an existing rule after which the new rule is placed. If this parameter is null, the new rule is inserted at the beginning of the rule list.
      */
     After?: ReceiptRuleName;
     /**
@@ -809,7 +809,7 @@ declare namespace SES {
   }
   export interface CreateReceiptRuleSetRequest {
     /**
-     * The name of the rule set to create. The name must:   This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).   Start and end with a letter or number.   Contain less than 64 characters.  
+     * The name of the rule set to create. The name must meet the following requirements:   Contain only ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).   Start and end with a letter or number.   Contain 64 characters or fewer.  
      */
     RuleSetName: ReceiptRuleSetName;
   }
@@ -817,7 +817,7 @@ declare namespace SES {
   }
   export interface CreateTemplateRequest {
     /**
-     * The content of the email, composed of a subject line, an HTML part, and a text-only part.
+     * The content of the email, composed of a subject line and either an HTML part or a text-only part.
      */
     Template: Template;
   }
@@ -871,7 +871,7 @@ declare namespace SES {
   }
   export interface DeleteConfigurationSetTrackingOptionsRequest {
     /**
-     * The name of the configuration set from which you want to delete the tracking options.
+     * The name of the configuration set.
      */
     ConfigurationSetName: ConfigurationSetName;
   }
@@ -879,13 +879,13 @@ declare namespace SES {
   }
   export interface DeleteCustomVerificationEmailTemplateRequest {
     /**
-     * The name of the custom verification email template that you want to delete.
+     * The name of the custom verification email template to delete.
      */
     TemplateName: TemplateName;
   }
   export interface DeleteIdentityPolicyRequest {
     /**
-     * The identity that is associated with the policy that you want to delete. You can specify the identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com. To successfully call this API, you must own the identity.
+     * The identity that is associated with the policy to delete. You can specify the identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com. To successfully call this operation, you must own the identity.
      */
     Identity: Identity;
     /**
@@ -897,7 +897,7 @@ declare namespace SES {
   }
   export interface DeleteIdentityRequest {
     /**
-     * The identity to be removed from the list of identities for the AWS Account.
+     * The identity to be removed from the list of identities for the Amazon Web Services account.
      */
     Identity: Identity;
   }
@@ -1049,7 +1049,7 @@ declare namespace SES {
   export type Error = string;
   export interface EventDestination {
     /**
-     * The name of the event destination. The name must:   This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).   Contain less than 64 characters.  
+     * The name of the event destination. The name must meet the following requirements:   Contain only ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).   Contain 64 characters or fewer.  
      */
     Name: EventDestinationName;
     /**
@@ -1057,7 +1057,7 @@ declare namespace SES {
      */
     Enabled?: Enabled;
     /**
-     * The type of email sending events to publish to the event destination.
+     * The type of email sending events to publish to the event destination.    send - The call was successful and Amazon SES is attempting to deliver the email.    reject - Amazon SES determined that the email contained a virus and rejected it.    bounce - The recipient's mail server permanently rejected the email. This corresponds to a hard bounce.    complaint - The recipient marked the email as spam.    delivery - Amazon SES successfully delivered the email to the recipient's mail server.    open - The recipient received the email and opened it in their email client.    click - The recipient clicked one or more links in the email.    renderingFailure - Amazon SES did not send the email because of a template rendering issue.  
      */
     MatchingEventTypes: EventTypes;
     /**
@@ -1084,7 +1084,7 @@ declare namespace SES {
      */
     Name: ExtensionFieldName;
     /**
-     * The value of the header to add. Must be less than 2048 characters, and must not contain newline characters ("\r" or "\n").
+     * The value of the header to add. Must contain 2048 characters or fewer, and must not contain newline characters ("\r" or "\n").
      */
     Value: ExtensionFieldValue;
   }
@@ -1095,13 +1095,13 @@ declare namespace SES {
   export type FromAddress = string;
   export interface GetAccountSendingEnabledResponse {
     /**
-     * Describes whether email sending is enabled or disabled for your Amazon SES account in the current AWS Region.
+     * Describes whether email sending is enabled or disabled for your Amazon SES account in the current Amazon Web Services Region.
      */
     Enabled?: Enabled;
   }
   export interface GetCustomVerificationEmailTemplateRequest {
     /**
-     * The name of the custom verification email template that you want to retrieve.
+     * The name of the custom verification email template to retrieve.
      */
     TemplateName: TemplateName;
   }
@@ -1169,7 +1169,7 @@ declare namespace SES {
   }
   export interface GetIdentityPoliciesRequest {
     /**
-     * The identity for which the policies will be retrieved. You can specify an identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com. To successfully call this API, you must own the identity.
+     * The identity for which the policies are retrieved. You can specify an identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com. To successfully call this operation, you must own the identity.
      */
     Identity: Identity;
     /**
@@ -1217,7 +1217,7 @@ declare namespace SES {
   }
   export interface GetTemplateRequest {
     /**
-     * The name of the template you want to retrieve.
+     * The name of the template to retrieve.
      */
     TemplateName: TemplateName;
   }
@@ -1259,31 +1259,31 @@ declare namespace SES {
   }
   export interface IdentityNotificationAttributes {
     /**
-     * The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES will publish bounce notifications.
+     * The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES publishes bounce notifications.
      */
     BounceTopic: NotificationTopic;
     /**
-     * The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES will publish complaint notifications.
+     * The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES publishes complaint notifications.
      */
     ComplaintTopic: NotificationTopic;
     /**
-     * The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES will publish delivery notifications.
+     * The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES publishes delivery notifications.
      */
     DeliveryTopic: NotificationTopic;
     /**
-     * Describes whether Amazon SES will forward bounce and complaint notifications as email. true indicates that Amazon SES will forward bounce and complaint notifications as email, while false indicates that bounce and complaint notifications will be published only to the specified bounce and complaint Amazon SNS topics.
+     * Describes whether Amazon SES forwards bounce and complaint notifications as email. true indicates that Amazon SES forwards bounce and complaint notifications as email, while false indicates that bounce and complaint notifications are published only to the specified bounce and complaint Amazon SNS topics.
      */
     ForwardingEnabled: Enabled;
     /**
-     * Describes whether Amazon SES includes the original email headers in Amazon SNS notifications of type Bounce. A value of true specifies that Amazon SES will include headers in bounce notifications, and a value of false specifies that Amazon SES will not include headers in bounce notifications.
+     * Describes whether Amazon SES includes the original email headers in Amazon SNS notifications of type Bounce. A value of true specifies that Amazon SES includes headers in bounce notifications, and a value of false specifies that Amazon SES does not include headers in bounce notifications.
      */
     HeadersInBounceNotificationsEnabled?: Enabled;
     /**
-     * Describes whether Amazon SES includes the original email headers in Amazon SNS notifications of type Complaint. A value of true specifies that Amazon SES will include headers in complaint notifications, and a value of false specifies that Amazon SES will not include headers in complaint notifications.
+     * Describes whether Amazon SES includes the original email headers in Amazon SNS notifications of type Complaint. A value of true specifies that Amazon SES includes headers in complaint notifications, and a value of false specifies that Amazon SES does not include headers in complaint notifications.
      */
     HeadersInComplaintNotificationsEnabled?: Enabled;
     /**
-     * Describes whether Amazon SES includes the original email headers in Amazon SNS notifications of type Delivery. A value of true specifies that Amazon SES will include headers in delivery notifications, and a value of false specifies that Amazon SES will not include headers in delivery notifications.
+     * Describes whether Amazon SES includes the original email headers in Amazon SNS notifications of type Delivery. A value of true specifies that Amazon SES includes headers in delivery notifications, and a value of false specifies that Amazon SES does not include headers in delivery notifications.
      */
     HeadersInDeliveryNotificationsEnabled?: Enabled;
   }
@@ -1311,15 +1311,15 @@ declare namespace SES {
   }
   export interface LambdaAction {
     /**
-     * The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the Lambda action is taken. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.
+     * The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the Lambda action is executed. You can find the ARN of a topic by using the ListTopics operation in Amazon SNS. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.
      */
     TopicArn?: AmazonResourceName;
     /**
-     * The Amazon Resource Name (ARN) of the AWS Lambda function. An example of an AWS Lambda function ARN is arn:aws:lambda:us-west-2:account-id:function:MyFunction. For more information about AWS Lambda, see the AWS Lambda Developer Guide.
+     * The Amazon Resource Name (ARN) of the Amazon Web Services Lambda function. An example of an Amazon Web Services Lambda function ARN is arn:aws:lambda:us-west-2:account-id:function:MyFunction. For more information about Amazon Web Services Lambda, see the Amazon Web Services Lambda Developer Guide.
      */
     FunctionArn: AmazonResourceName;
     /**
-     * The invocation type of the AWS Lambda function. An invocation type of RequestResponse means that the execution of the function will immediately result in a response, and a value of Event means that the function will be invoked asynchronously. The default value is Event. For information about AWS Lambda invocation types, see the AWS Lambda Developer Guide.  There is a 30-second timeout on RequestResponse invocations. You should use Event invocation in most cases. Use RequestResponse only when you want to make a mail flow decision, such as whether to stop the receipt rule or the receipt rule set. 
+     * The invocation type of the Amazon Web Services Lambda function. An invocation type of RequestResponse means that the execution of the function immediately results in a response, and a value of Event means that the function is invoked asynchronously. The default value is Event. For information about Amazon Web Services Lambda invocation types, see the Amazon Web Services Lambda Developer Guide.  There is a 30-second timeout on RequestResponse invocations. You should use Event invocation in most cases. Use RequestResponse only to make a mail flow decision, such as whether to stop the receipt rule or the receipt rule set. 
      */
     InvocationType?: InvocationType;
   }
@@ -1351,7 +1351,7 @@ declare namespace SES {
      */
     NextToken?: NextToken;
     /**
-     * The maximum number of custom verification email templates to return. This value must be at least 1 and less than or equal to 50. If you do not specify a value, or if you specify a value less than 1 or greater than 50, the operation will return up to 50 results.
+     * The maximum number of custom verification email templates to return. This value must be at least 1 and less than or equal to 50. If you do not specify a value, or if you specify a value less than 1 or greater than 50, the operation returns up to 50 results.
      */
     MaxResults?: MaxResults;
   }
@@ -1367,7 +1367,7 @@ declare namespace SES {
   }
   export interface ListIdentitiesRequest {
     /**
-     * The type of the identities to list. Possible values are "EmailAddress" and "Domain". If this parameter is omitted, then all identities will be listed.
+     * The type of the identities to list. Possible values are "EmailAddress" and "Domain". If this parameter is omitted, then all identities are listed.
      */
     IdentityType?: IdentityType;
     /**
@@ -1391,7 +1391,7 @@ declare namespace SES {
   }
   export interface ListIdentityPoliciesRequest {
     /**
-     * The identity that is associated with the policy for which the policies will be listed. You can specify an identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com. To successfully call this API, you must own the identity.
+     * The identity that is associated with the policy for which the policies are listed. You can specify an identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com. To successfully call this operation, you must own the identity.
      */
     Identity: Identity;
   }
@@ -1431,7 +1431,7 @@ declare namespace SES {
      */
     NextToken?: NextToken;
     /**
-     * The maximum number of templates to return. This value must be at least 1 and less than or equal to 10. If you do not specify a value, or if you specify a value less than 1 or greater than 10, the operation will return up to 10 results.
+     * The maximum number of templates to return. This value must be at least 1 and less than or equal to 100. If more than 100 items are requested, the page size will automatically set to 100. If you do not specify a value, 10 is the default page size. 
      */
     MaxItems?: MaxItems;
   }
@@ -1441,7 +1441,7 @@ declare namespace SES {
      */
     TemplatesMetadata?: TemplateMetadataList;
     /**
-     * A token indicating that there are additional email templates available to be listed. Pass this token to a subsequent call to ListTemplates to retrieve the next 50 email templates.
+     * A token indicating that there are additional email templates available to be listed. Pass this token to a subsequent call to ListTemplates to retrieve the next set of email templates within your page size.
      */
     NextToken?: NextToken;
   }
@@ -1459,7 +1459,7 @@ declare namespace SES {
   export type MaxSendRate = number;
   export interface Message {
     /**
-     * The subject of the message: A short summary of the content, which will appear in the recipient's inbox.
+     * The subject of the message: A short summary of the content, which appears in the recipient's inbox.
      */
     Subject: Content;
     /**
@@ -1485,11 +1485,11 @@ declare namespace SES {
   export type MessageId = string;
   export interface MessageTag {
     /**
-     * The name of the tag. The name must:   This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).   Contain less than 256 characters.  
+     * The name of the tag. The name must meet the following requirements:   Contain only ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).   Contain 256 characters or fewer.  
      */
     Name: MessageTagName;
     /**
-     * The value of the tag. The value must:   This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).   Contain less than 256 characters.  
+     * The value of the tag. The value must meet the following requirements:   Contain only ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).   Contain 256 characters or fewer.  
      */
     Value: MessageTagValue;
   }
@@ -1506,7 +1506,7 @@ declare namespace SES {
   export type PolicyNameList = PolicyName[];
   export interface PutConfigurationSetDeliveryOptionsRequest {
     /**
-     * The name of the configuration set that you want to specify the delivery options for.
+     * The name of the configuration set.
      */
     ConfigurationSetName: ConfigurationSetName;
     /**
@@ -1518,7 +1518,7 @@ declare namespace SES {
   }
   export interface PutIdentityPolicyRequest {
     /**
-     * The identity that the policy will apply to. You can specify an identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com. To successfully call this API, you must own the identity.
+     * The identity to which that the policy applies. You can specify an identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com. To successfully call this operation, you must own the identity.
      */
     Identity: Identity;
     /**
@@ -1534,7 +1534,7 @@ declare namespace SES {
   }
   export interface RawMessage {
     /**
-     * The raw data of the message. This data needs to base64-encoded if you are accessing Amazon SES directly through the HTTPS interface. If you are accessing Amazon SES using an AWS SDK, the SDK takes care of the base 64-encoding for you. In all cases, the client must ensure that the message format complies with Internet email standards regarding email header fields, MIME types, and MIME encoding. The To:, CC:, and BCC: headers in the raw message can contain a group list. If you are using SendRawEmail with sending authorization, you can include X-headers in the raw message to specify the "Source," "From," and "Return-Path" addresses. For more information, see the documentation for SendRawEmail.   Do not include these X-headers in the DKIM signature, because they are removed by Amazon SES before sending the email.  For more information, go to the Amazon SES Developer Guide.
+     * The raw data of the message. This data needs to base64-encoded if you are accessing Amazon SES directly through the HTTPS interface. If you are accessing Amazon SES using an Amazon Web Services SDK, the SDK takes care of the base 64-encoding for you. In all cases, the client must ensure that the message format complies with Internet email standards regarding email header fields, MIME types, and MIME encoding. The To:, CC:, and BCC: headers in the raw message can contain a group list. If you are using SendRawEmail with sending authorization, you can include X-headers in the raw message to specify the "Source," "From," and "Return-Path" addresses. For more information, see the documentation for SendRawEmail.   Do not include these X-headers in the DKIM signature, because they are removed by Amazon SES before sending the email.  For more information, go to the Amazon SES Developer Guide.
      */
     Data: RawMessageData;
   }
@@ -1553,7 +1553,7 @@ declare namespace SES {
      */
     WorkmailAction?: WorkmailAction;
     /**
-     * Calls an AWS Lambda function, and optionally, publishes a notification to Amazon SNS.
+     * Calls an Amazon Web Services Lambda function, and optionally, publishes a notification to Amazon SNS.
      */
     LambdaAction?: LambdaAction;
     /**
@@ -1572,7 +1572,7 @@ declare namespace SES {
   export type ReceiptActionsList = ReceiptAction[];
   export interface ReceiptFilter {
     /**
-     * The name of the IP address filter. The name must:   This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).   Start and end with a letter or number.   Contain less than 64 characters.  
+     * The name of the IP address filter. The name must meet the following requirements:   Contain only ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).   Start and end with a letter or number.   Contain 64 characters or fewer.  
      */
     Name: ReceiptFilterName;
     /**
@@ -1589,13 +1589,13 @@ declare namespace SES {
      */
     Policy: ReceiptFilterPolicy;
     /**
-     * A single IP address or a range of IP addresses that you want to block or allow, specified in Classless Inter-Domain Routing (CIDR) notation. An example of a single email address is 10.0.0.1. An example of a range of IP addresses is 10.0.0.1/24. For more information about CIDR notation, see RFC 2317.
+     * A single IP address or a range of IP addresses to block or allow, specified in Classless Inter-Domain Routing (CIDR) notation. An example of a single email address is 10.0.0.1. An example of a range of IP addresses is 10.0.0.1/24. For more information about CIDR notation, see RFC 2317.
      */
     Cidr: Cidr;
   }
   export interface ReceiptRule {
     /**
-     * The name of the receipt rule. The name must:   This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).   Start and end with a letter or number.   Contain less than 64 characters.  
+     * The name of the receipt rule. The name must meet the following requirements:   Contain only ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), dashes (-), or periods (.).    Start and end with a letter or number.   Contain 64 characters or fewer.  
      */
     Name: ReceiptRuleName;
     /**
@@ -1603,11 +1603,11 @@ declare namespace SES {
      */
     Enabled?: Enabled;
     /**
-     * Specifies whether Amazon SES should require that incoming email is delivered over a connection encrypted with Transport Layer Security (TLS). If this parameter is set to Require, Amazon SES will bounce emails that are not received over TLS. The default is Optional.
+     * Specifies whether Amazon SES should require that incoming email is delivered over a connection encrypted with Transport Layer Security (TLS). If this parameter is set to Require, Amazon SES bounces emails that are not received over TLS. The default is Optional.
      */
     TlsPolicy?: TlsPolicy;
     /**
-     * The recipient domains and email addresses that the receipt rule applies to. If this field is not specified, this rule will match all recipients under all verified domains.
+     * The recipient domains and email addresses that the receipt rule applies to. If this field is not specified, this rule matches all recipients on all verified domains.
      */
     Recipients?: RecipientsList;
     /**
@@ -1623,7 +1623,7 @@ declare namespace SES {
   export type ReceiptRuleNamesList = ReceiptRuleName[];
   export interface ReceiptRuleSetMetadata {
     /**
-     * The name of the receipt rule set. The name must:   This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).   Start and end with a letter or number.   Contain less than 64 characters.  
+     * The name of the receipt rule set. The name must meet the following requirements:   Contain only ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).   Start and end with a letter or number.   Contain 64 characters or fewer.  
      */
     Name?: ReceiptRuleSetName;
     /**
@@ -1637,7 +1637,7 @@ declare namespace SES {
   export type Recipient = string;
   export interface RecipientDsnFields {
     /**
-     * The email address that the message was ultimately delivered to. This corresponds to the Final-Recipient in the DSN. If not specified, FinalRecipient will be set to the Recipient specified in the BouncedRecipientInfo structure. Either FinalRecipient or the recipient in BouncedRecipientInfo must be a recipient of the original bounced message.  Do not prepend the FinalRecipient email address with rfc 822;, as described in RFC 3798. 
+     * The email address that the message was ultimately delivered to. This corresponds to the Final-Recipient in the DSN. If not specified, FinalRecipient is set to the Recipient specified in the BouncedRecipientInfo structure. Either FinalRecipient or the recipient in BouncedRecipientInfo must be a recipient of the original bounced message.  Do not prepend the FinalRecipient email address with rfc 822;, as described in RFC 3798. 
      */
     FinalRecipient?: Address;
     /**
@@ -1674,7 +1674,7 @@ declare namespace SES {
      */
     RuleSetName: ReceiptRuleSetName;
     /**
-     * A list of the specified receipt rule set's receipt rules in the order that you want to put them.
+     * The specified receipt rule set's receipt rules, in order.
      */
     RuleNames: ReceiptRuleNamesList;
   }
@@ -1683,7 +1683,7 @@ declare namespace SES {
   export type ReportingMta = string;
   export interface ReputationOptions {
     /**
-     * Describes whether email sending is enabled or disabled for the configuration set. If the value is true, then Amazon SES will send emails that use the configuration set. If the value is false, Amazon SES will not send emails that use the configuration set. The default value is true. You can change this setting using UpdateConfigurationSetSendingEnabled.
+     * Describes whether email sending is enabled or disabled for the configuration set. If the value is true, then Amazon SES sends emails that use the configuration set. If the value is false, Amazon SES does not send emails that use the configuration set. The default value is true. You can change this setting using UpdateConfigurationSetSendingEnabled.
      */
     SendingEnabled?: Enabled;
     /**
@@ -1697,11 +1697,11 @@ declare namespace SES {
   }
   export interface S3Action {
     /**
-     * The ARN of the Amazon SNS topic to notify when the message is saved to the Amazon S3 bucket. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.
+     * The ARN of the Amazon SNS topic to notify when the message is saved to the Amazon S3 bucket. You can find the ARN of a topic by using the ListTopics operation in Amazon SNS. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.
      */
     TopicArn?: AmazonResourceName;
     /**
-     * The name of the Amazon S3 bucket that incoming email will be saved to.
+     * The name of the Amazon S3 bucket for incoming email.
      */
     BucketName: S3BucketName;
     /**
@@ -1709,7 +1709,7 @@ declare namespace SES {
      */
     ObjectKeyPrefix?: S3KeyPrefix;
     /**
-     * The customer master key that Amazon SES should use to encrypt your emails before saving them to the Amazon S3 bucket. You can use the default master key or a custom master key you created in AWS KMS as follows:   To use the default master key, provide an ARN in the form of arn:aws:kms:REGION:ACCOUNT-ID-WITHOUT-HYPHENS:alias/aws/ses. For example, if your AWS account ID is 123456789012 and you want to use the default master key in the US West (Oregon) region, the ARN of the default master key would be arn:aws:kms:us-west-2:123456789012:alias/aws/ses. If you use the default master key, you don't need to perform any extra steps to give Amazon SES permission to use the key.   To use a custom master key you created in AWS KMS, provide the ARN of the master key and ensure that you add a statement to your key's policy to give Amazon SES permission to use it. For more information about giving permissions, see the Amazon SES Developer Guide.   For more information about key policies, see the AWS KMS Developer Guide. If you do not specify a master key, Amazon SES will not encrypt your emails.  Your mail is encrypted by Amazon SES using the Amazon S3 encryption client before the mail is submitted to Amazon S3 for storage. It is not encrypted using Amazon S3 server-side encryption. This means that you must use the Amazon S3 encryption client to decrypt the email after retrieving it from Amazon S3, as the service has no access to use your AWS KMS keys for decryption. This encryption client is currently available with the AWS SDK for Java and AWS SDK for Ruby only. For more information about client-side encryption using AWS KMS master keys, see the Amazon S3 Developer Guide. 
+     * The customer master key that Amazon SES should use to encrypt your emails before saving them to the Amazon S3 bucket. You can use the default master key or a custom master key that you created in Amazon Web Services KMS as follows:   To use the default master key, provide an ARN in the form of arn:aws:kms:REGION:ACCOUNT-ID-WITHOUT-HYPHENS:alias/aws/ses. For example, if your Amazon Web Services account ID is 123456789012 and you want to use the default master key in the US West (Oregon) Region, the ARN of the default master key would be arn:aws:kms:us-west-2:123456789012:alias/aws/ses. If you use the default master key, you don't need to perform any extra steps to give Amazon SES permission to use the key.   To use a custom master key that you created in Amazon Web Services KMS, provide the ARN of the master key and ensure that you add a statement to your key's policy to give Amazon SES permission to use it. For more information about giving permissions, see the Amazon SES Developer Guide.   For more information about key policies, see the Amazon Web Services KMS Developer Guide. If you do not specify a master key, Amazon SES does not encrypt your emails.  Your mail is encrypted by Amazon SES using the Amazon S3 encryption client before the mail is submitted to Amazon S3 for storage. It is not encrypted using Amazon S3 server-side encryption. This means that you must use the Amazon S3 encryption client to decrypt the email after retrieving it from Amazon S3, as the service has no access to use your Amazon Web Services KMS keys for decryption. This encryption client is currently available with the Amazon Web Services SDK for Java and Amazon Web Services SDK for Ruby only. For more information about client-side encryption using Amazon Web Services KMS master keys, see the Amazon S3 Developer Guide. 
      */
     KmsKeyArn?: AmazonResourceName;
   }
@@ -1717,7 +1717,7 @@ declare namespace SES {
   export type S3KeyPrefix = string;
   export interface SNSAction {
     /**
-     * The Amazon Resource Name (ARN) of the Amazon SNS topic to notify. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.
+     * The Amazon Resource Name (ARN) of the Amazon SNS topic to notify. You can find the ARN of a topic by using the ListTopics operation in Amazon SNS. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.
      */
     TopicArn: AmazonResourceName;
     /**
@@ -1728,7 +1728,7 @@ declare namespace SES {
   export type SNSActionEncoding = "UTF-8"|"Base64"|string;
   export interface SNSDestination {
     /**
-     * The ARN of the Amazon SNS topic that email sending events will be published to. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.
+     * The ARN of the Amazon SNS topic for email sending events. You can find the ARN of a topic by using the ListTopics Amazon SNS operation. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.
      */
     TopicARN: AmazonResourceName;
   }
@@ -1742,11 +1742,11 @@ declare namespace SES {
      */
     BounceSender: Address;
     /**
-     * Human-readable text for the bounce message to explain the failure. If not specified, the text will be auto-generated based on the bounced recipient information.
+     * Human-readable text for the bounce message to explain the failure. If not specified, the text is auto-generated based on the bounced recipient information.
      */
     Explanation?: Explanation;
     /**
-     * Message-related DSN fields. If not specified, Amazon SES will choose the values.
+     * Message-related DSN fields. If not specified, Amazon SES chooses the values.
      */
     MessageDsn?: MessageDsn;
     /**
@@ -1766,7 +1766,7 @@ declare namespace SES {
   }
   export interface SendBulkTemplatedEmailRequest {
     /**
-     * The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide. If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide.  Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described in RFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=. 
+     * The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide. If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide.  Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the email address string must be 7-bit ASCII. If you want to send to or from email addresses that contain Unicode characters in the domain part of an address, you must encode the domain using Punycode. Punycode is not permitted in the local part of the email address (the part before the @ sign) nor in the "friendly from" name. If you want to use Unicode characters in the "friendly from" name, you must encode the "friendly from" name using MIME encoded-word syntax, as described in Sending raw email using the Amazon SES API. For more information about Punycode, see RFC 3492. 
      */
     Source: Address;
     /**
@@ -1774,11 +1774,11 @@ declare namespace SES {
      */
     SourceArn?: AmazonResourceName;
     /**
-     * The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address will receive the reply.
+     * The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address receives the reply.
      */
     ReplyToAddresses?: AddressList;
     /**
-     * The email address that bounces and complaints will be forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message will be returned from the recipient's ISP; this message will then be forwarded to the email address specified by the ReturnPath parameter. The ReturnPath parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. 
+     * The email address that bounces and complaints are forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message is returned from the recipient's ISP; this message is forwarded to the email address specified by the ReturnPath parameter. The ReturnPath parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. 
      */
     ReturnPath?: Address;
     /**
@@ -1806,13 +1806,13 @@ declare namespace SES {
      */
     DefaultTemplateData?: TemplateData;
     /**
-     * One or more Destination objects. All of the recipients in a Destination will receive the same version of the email. You can specify up to 50 Destination objects within a Destinations array.
+     * One or more Destination objects. All of the recipients in a Destination receive the same version of the email. You can specify up to 50 Destination objects within a Destinations array.
      */
     Destinations: BulkEmailDestinationList;
   }
   export interface SendBulkTemplatedEmailResponse {
     /**
-     * The unique message identifier returned from the SendBulkTemplatedEmail action.
+     * One object per intended recipient. Check each response object and retry any messages with a failure status. (Note that order of responses will be respective to order of destinations in the request.)Receipt rules enable you to specify which actions 
      */
     Status: BulkEmailDestinationStatusList;
   }
@@ -1861,7 +1861,7 @@ declare namespace SES {
   export type SendDataPointList = SendDataPoint[];
   export interface SendEmailRequest {
     /**
-     * The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide. If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide.  Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described in RFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=. 
+     * The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide. If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide.  Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the email address string must be 7-bit ASCII. If you want to send to or from email addresses that contain Unicode characters in the domain part of an address, you must encode the domain using Punycode. Punycode is not permitted in the local part of the email address (the part before the @ sign) nor in the "friendly from" name. If you want to use Unicode characters in the "friendly from" name, you must encode the "friendly from" name using MIME encoded-word syntax, as described in Sending raw email using the Amazon SES API. For more information about Punycode, see RFC 3492. 
      */
     Source: Address;
     /**
@@ -1873,11 +1873,11 @@ declare namespace SES {
      */
     Message: Message;
     /**
-     * The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address will receive the reply.
+     * The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address receives the reply.
      */
     ReplyToAddresses?: AddressList;
     /**
-     * The email address that bounces and complaints will be forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message will be returned from the recipient's ISP; this message will then be forwarded to the email address specified by the ReturnPath parameter. The ReturnPath parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. 
+     * The email address that bounces and complaints are forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message is returned from the recipient's ISP; this message is forwarded to the email address specified by the ReturnPath parameter. The ReturnPath parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. 
      */
     ReturnPath?: Address;
     /**
@@ -1905,7 +1905,7 @@ declare namespace SES {
   }
   export interface SendRawEmailRequest {
     /**
-     * The identity's email address. If you do not provide a value for this parameter, you must specify a "From" address in the raw text of the message. (You can also specify both.)  Amazon SES does not support the SMTPUTF8 extension, as described inRFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described in RFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=.  If you specify the Source parameter and have feedback forwarding enabled, then bounces and complaints will be sent to this email address. This takes precedence over any Return-Path header that you might include in the raw text of the message.
+     * The identity's email address. If you do not provide a value for this parameter, you must specify a "From" address in the raw text of the message. (You can also specify both.)  Amazon SES does not support the SMTPUTF8 extension, as described inRFC6531. For this reason, the email address string must be 7-bit ASCII. If you want to send to or from email addresses that contain Unicode characters in the domain part of an address, you must encode the domain using Punycode. Punycode is not permitted in the local part of the email address (the part before the @ sign) nor in the "friendly from" name. If you want to use Unicode characters in the "friendly from" name, you must encode the "friendly from" name using MIME encoded-word syntax, as described in Sending raw email using the Amazon SES API. For more information about Punycode, see RFC 3492.  If you specify the Source parameter and have feedback forwarding enabled, then bounces and complaints are sent to this email address. This takes precedence over any Return-Path header that you might include in the raw text of the message.
      */
     Source?: Address;
     /**
@@ -1945,7 +1945,7 @@ declare namespace SES {
   }
   export interface SendTemplatedEmailRequest {
     /**
-     * The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide. If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide.  Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described inRFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=. 
+     * The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide. If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide.  Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. for this reason, The email address string must be 7-bit ASCII. If you want to send to or from email addresses that contain Unicode characters in the domain part of an address, you must encode the domain using Punycode. Punycode is not permitted in the local part of the email address (the part before the @ sign) nor in the "friendly from" name. If you want to use Unicode characters in the "friendly from" name, you must encode the "friendly from" name using MIME encoded-word syntax, as described in Sending raw email using the Amazon SES API. For more information about Punycode, see RFC 3492. 
      */
     Source: Address;
     /**
@@ -1953,11 +1953,11 @@ declare namespace SES {
      */
     Destination: Destination;
     /**
-     * The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address will receive the reply.
+     * The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address receives the reply.
      */
     ReplyToAddresses?: AddressList;
     /**
-     * The email address that bounces and complaints will be forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message will be returned from the recipient's ISP; this message will then be forwarded to the email address specified by the ReturnPath parameter. The ReturnPath parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. 
+     * The email address that bounces and complaints are forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message is returned from the recipient's ISP; this message is forwarded to the email address specified by the ReturnPath parameter. The ReturnPath parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. 
      */
     ReturnPath?: Address;
     /**
@@ -2022,7 +2022,7 @@ declare namespace SES {
      */
     Identity: Identity;
     /**
-     * Sets whether Amazon SES will forward bounce and complaint notifications as email. true specifies that Amazon SES will forward bounce and complaint notifications as email, in addition to any Amazon SNS topic publishing otherwise specified. false specifies that Amazon SES will publish bounce and complaint notifications only through Amazon SNS. This value can only be set to false when Amazon SNS topics are set for both Bounce and Complaint notification types.
+     * Sets whether Amazon SES forwards bounce and complaint notifications as email. true specifies that Amazon SES forwards bounce and complaint notifications as email, in addition to any Amazon SNS topic publishing otherwise specified. false specifies that Amazon SES publishes bounce and complaint notifications only through Amazon SNS. This value can only be set to false when Amazon SNS topics are set for both Bounce and Complaint notification types.
      */
     ForwardingEnabled: Enabled;
   }
@@ -2038,7 +2038,7 @@ declare namespace SES {
      */
     NotificationType: NotificationType;
     /**
-     * Sets whether Amazon SES includes the original email headers in Amazon SNS notifications of the specified notification type. A value of true specifies that Amazon SES will include headers in notifications, and a value of false specifies that Amazon SES will not include headers in notifications. This value can only be set when NotificationType is already set to use a particular Amazon SNS topic.
+     * Sets whether Amazon SES includes the original email headers in Amazon SNS notifications of the specified notification type. A value of true specifies that Amazon SES includes headers in notifications, and a value of false specifies that Amazon SES does not include headers in notifications. This value can only be set when NotificationType is already set to use a particular Amazon SNS topic.
      */
     Enabled: Enabled;
   }
@@ -2046,15 +2046,15 @@ declare namespace SES {
   }
   export interface SetIdentityMailFromDomainRequest {
     /**
-     * The verified identity for which you want to enable or disable the specified custom MAIL FROM domain.
+     * The verified identity.
      */
     Identity: Identity;
     /**
-     * The custom MAIL FROM domain that you want the verified identity to use. The MAIL FROM domain must 1) be a subdomain of the verified identity, 2) not be used in a "From" address if the MAIL FROM domain is the destination of email feedback forwarding (for more information, see the Amazon SES Developer Guide), and 3) not be used to receive emails. A value of null disables the custom MAIL FROM setting for the identity.
+     * The custom MAIL FROM domain for the verified identity to use. The MAIL FROM domain must 1) be a subdomain of the verified identity, 2) not be used in a "From" address if the MAIL FROM domain is the destination of email feedback forwarding (for more information, see the Amazon SES Developer Guide), and 3) not be used to receive emails. A value of null disables the custom MAIL FROM setting for the identity.
      */
     MailFromDomain?: MailFromDomainName;
     /**
-     * The action that you want Amazon SES to take if it cannot successfully read the required MX record when you send an email. If you choose UseDefaultValue, Amazon SES will use amazonses.com (or a subdomain of that) as the MAIL FROM domain. If you choose RejectMessage, Amazon SES will return a MailFromDomainNotVerified error and not send the email. The action specified in BehaviorOnMXFailure is taken when the custom MAIL FROM domain setup is in the Pending, Failed, and TemporaryFailure states.
+     * The action for Amazon SES to take if it cannot successfully read the required MX record when you send an email. If you choose UseDefaultValue, Amazon SES uses amazonses.com (or a subdomain of that) as the MAIL FROM domain. If you choose RejectMessage, Amazon SES returns a MailFromDomainNotVerified error and not send the email. The action specified in BehaviorOnMXFailure is taken when the custom MAIL FROM domain setup is in the Pending, Failed, and TemporaryFailure states.
      */
     BehaviorOnMXFailure?: BehaviorOnMXFailure;
   }
@@ -2062,11 +2062,11 @@ declare namespace SES {
   }
   export interface SetIdentityNotificationTopicRequest {
     /**
-     * The identity (email address or domain) that you want to set the Amazon SNS topic for.  You can only specify a verified identity for this parameter.  You can specify an identity by using its name or by using its Amazon Resource Name (ARN). The following examples are all valid identities: sender@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com.
+     * The identity (email address or domain) for the Amazon SNS topic.  You can only specify a verified identity for this parameter.  You can specify an identity by using its name or by using its Amazon Resource Name (ARN). The following examples are all valid identities: sender@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com.
      */
     Identity: Identity;
     /**
-     * The type of notifications that will be published to the specified Amazon SNS topic.
+     * The type of notifications that are published to the specified Amazon SNS topic.
      */
     NotificationType: NotificationType;
     /**
@@ -2098,7 +2098,7 @@ declare namespace SES {
      */
     Scope: StopScope;
     /**
-     * The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the stop action is taken. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.
+     * The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the stop action is taken. You can find the ARN of a topic by using the ListTopics Amazon SNS operation. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.
      */
     TopicArn?: AmazonResourceName;
   }
@@ -2108,7 +2108,7 @@ declare namespace SES {
   export type SuccessRedirectionURL = string;
   export interface Template {
     /**
-     * The name of the template. You will refer to this name when you send email using the SendTemplatedEmail or SendBulkTemplatedEmail operations.
+     * The name of the template. You use this name when you send email using the SendTemplatedEmail or SendBulkTemplatedEmail operations.
      */
     TemplateName: TemplateName;
     /**
@@ -2116,7 +2116,7 @@ declare namespace SES {
      */
     SubjectPart?: SubjectPart;
     /**
-     * The email body that will be visible to recipients whose email clients do not display HTML.
+     * The email body that is visible to recipients whose email clients do not display HTML content.
      */
     TextPart?: TextPart;
     /**
@@ -2140,7 +2140,7 @@ declare namespace SES {
   export type TemplateName = string;
   export interface TestRenderTemplateRequest {
     /**
-     * The name of the template that you want to render.
+     * The name of the template to render.
      */
     TemplateName: TemplateName;
     /**
@@ -2159,23 +2159,23 @@ declare namespace SES {
   export type TlsPolicy = "Require"|"Optional"|string;
   export interface TrackingOptions {
     /**
-     * The custom subdomain that will be used to redirect email recipients to the Amazon SES event tracking domain.
+     * The custom subdomain that is used to redirect email recipients to the Amazon SES event tracking domain.
      */
     CustomRedirectDomain?: CustomRedirectDomain;
   }
   export interface UpdateAccountSendingEnabledRequest {
     /**
-     * Describes whether email sending is enabled or disabled for your Amazon SES account in the current AWS Region.
+     * Describes whether email sending is enabled or disabled for your Amazon SES account in the current Amazon Web Services Region.
      */
     Enabled?: Enabled;
   }
   export interface UpdateConfigurationSetEventDestinationRequest {
     /**
-     * The name of the configuration set that contains the event destination that you want to update.
+     * The name of the configuration set that contains the event destination.
      */
     ConfigurationSetName: ConfigurationSetName;
     /**
-     * The event destination object that you want to apply to the specified configuration set.
+     * The event destination object.
      */
     EventDestination: EventDestination;
   }
@@ -2183,17 +2183,17 @@ declare namespace SES {
   }
   export interface UpdateConfigurationSetReputationMetricsEnabledRequest {
     /**
-     * The name of the configuration set that you want to update.
+     * The name of the configuration set to update.
      */
     ConfigurationSetName: ConfigurationSetName;
     /**
-     * Describes whether or not Amazon SES will publish reputation metrics for the configuration set, such as bounce and complaint rates, to Amazon CloudWatch.
+     * Describes whether or not Amazon SES publishes reputation metrics for the configuration set, such as bounce and complaint rates, to Amazon CloudWatch.
      */
     Enabled: Enabled;
   }
   export interface UpdateConfigurationSetSendingEnabledRequest {
     /**
-     * The name of the configuration set that you want to update.
+     * The name of the configuration set to update.
      */
     ConfigurationSetName: ConfigurationSetName;
     /**
@@ -2203,7 +2203,7 @@ declare namespace SES {
   }
   export interface UpdateConfigurationSetTrackingOptionsRequest {
     /**
-     * The name of the configuration set for which you want to update the custom tracking domain.
+     * The name of the configuration set.
      */
     ConfigurationSetName: ConfigurationSetName;
     TrackingOptions: TrackingOptions;
@@ -2212,7 +2212,7 @@ declare namespace SES {
   }
   export interface UpdateCustomVerificationEmailTemplateRequest {
     /**
-     * The name of the custom verification email template that you want to update.
+     * The name of the custom verification email template to update.
      */
     TemplateName: TemplateName;
     /**
@@ -2277,7 +2277,7 @@ declare namespace SES {
   }
   export interface VerifyDomainIdentityResponse {
     /**
-     * A TXT record that you must place in the DNS settings of the domain to complete domain verification with Amazon SES. As Amazon SES searches for the TXT record, the domain's verification status is "Pending". When Amazon SES detects the record, the domain's verification status changes to "Success". If Amazon SES is unable to detect the record within 72 hours, the domain's verification status changes to "Failed." In that case, if you still want to verify the domain, you must restart the verification process from the beginning.
+     * A TXT record that you must place in the DNS settings of the domain to complete domain verification with Amazon SES. As Amazon SES searches for the TXT record, the domain's verification status is "Pending". When Amazon SES detects the record, the domain's verification status changes to "Success". If Amazon SES is unable to detect the record within 72 hours, the domain's verification status changes to "Failed." In that case, to verify the domain, you must restart the verification process from the beginning. The domain's verification status also changes to "Success" when it is DKIM verified.
      */
     VerificationToken: VerificationToken;
   }
@@ -2297,11 +2297,11 @@ declare namespace SES {
   }
   export interface WorkmailAction {
     /**
-     * The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the WorkMail action is called. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.
+     * The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the WorkMail action is called. You can find the ARN of a topic by using the ListTopics operation in Amazon SNS. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.
      */
     TopicArn?: AmazonResourceName;
     /**
-     * The ARN of the Amazon WorkMail organization. An example of an Amazon WorkMail organization ARN is arn:aws:workmail:us-west-2:123456789012:organization/m-68755160c4cb4e29a2b2f8fb58f359d7. For information about Amazon WorkMail organizations, see the Amazon WorkMail Administrator Guide.
+     * The Amazon Resource Name (ARN) of the Amazon WorkMail organization. Amazon WorkMail ARNs use the following format:  arn:aws:workmail:&lt;region&gt;:&lt;awsAccountId&gt;:organization/&lt;workmailOrganizationId&gt;  You can find the ID of your organization by using the ListOrganizations operation in Amazon WorkMail. Amazon WorkMail organization IDs begin with "m-", followed by a string of alphanumeric characters. For information about Amazon WorkMail organizations, see the Amazon WorkMail Administrator Guide.
      */
     OrganizationArn: AmazonResourceName;
   }