captchakraken 2.8.0 → 3.0.0

package/python/src/captchakraken/humanize.py

@@ -1,48 +1,9 @@
-"""
-How the driver MOVES. One pluggable object per input device.
-
-Humanisation used to be wired straight into `page_solver`: every gesture was a
-`page.mouse.*` call with a Bezier trajectory in front of it and a `random()`
-sleep behind it, and there was no way to ask for anything else. That is wrong in
-three directions at once —
-
-  - a caller driving a MOBILE page has no cursor. Dispatching mousemove at a
-    touch-only widget is not weak humanisation, it is the wrong event type: the
-    page's touch handlers never fire, and a vendor that scores pointer telemetry
-    sees a desktop mouse on a phone.
-  - a caller who has their OWN humanisation (a hardware pointer, a proxied
-    device farm, a model of their own users) was composing two of them. That is
-    not hypothetical — camoufox's `humanize` juggler re-humanises every
-    `mouse.move()` it is handed, and running both measured 82.1s against 13.4s
-    on one geetest_v4_slide solve, because each of the 60 trajectory points
-    became its own humanised sub-trajectory.
-  - a caller on their own infrastructure, against their own fixtures, is paying
-    for texture nobody is measuring.
-
-So the vocabulary of gestures is an INTERFACE and the humanisation is an
-implementation of it. `page_solver` says "tap here", "drag this there", "type
-that"; a `Humanizer` decides what events that is and how long it takes.
-
-Four modes, selected by `PageSolverConfig.humanization`:
-
-    "mouse"   MouseHumanizer   — the default, and byte-for-byte what the driver
-                                 did before this module existed.
-    "mobile"  MobileHumanizer  — touch events, finger kinematics. Dispatches
-                                 through a `TouchBackend`, so it drives either a
-                                 Chromium-family page (CDP) or an Appium/W3C
-                                 driver on a real device.
-    "none"    NullHumanizer    — the shortest legal path to the same DOM effect.
-    custom    anything satisfying `Humanizer`, passed as
-                                 `PageSolverConfig.humanizer`.
-
-THE POINTER POSITION LIVES HERE, not in the solver. A humanizer that dispatches
-no motion at all (mobile, between taps) still has to answer "where is the
-pointer", because that is what the next gesture starts from and what
-`SolveResult.final_mouse_position` reports.
-
-The TypeScript side is `js/src/humanize.ts`; the two are one design in two
-languages, and `tests/test_humanizer_parity.py` in CaptchaKrakenFinetune pins
-that the mode names and the pause vocabulary have not drifted.
+"""How the driver moves: one pluggable object per input device. Mirrors js/src/humanize.ts.
+
+Humanisation is an interface, not a dial: composing ours with camoufox's own juggler measured
+82.1s against 13.4s on one GeeTest v4 slider, and a mousemove at a touch widget is the wrong
+event type, not weak mimicry. The pointer position lives here, not in the solver, because a
+touch mode that dispatches no motion between taps still has to say where the next gesture starts.
 """
 
 from __future__ import annotations
@@ -50,12 +11,18 @@ from __future__ import annotations
 import os
 import random
 import time
-from typing import Any, Dict, Optional, Sequence, Tuple
+from typing import Any, Dict, List, Optional, Sequence, Tuple
 
-from .trajectory import generate_swipe, generate_trajectory
+from cursory import generate_trajectory
+
+from .kinds import HumanizationMode, PauseKind
 
 Point = Tuple[float, float]
 
+# Each device supplies its own table. An unknown kind yields no wait rather than raising, so adding
+# a pause site cannot break a custom humanizer written against an older release.
+PAUSE_KINDS = tuple(PauseKind)
+
 
 def _delay(ms: float) -> None:
     if ms > 0:
@@ -67,61 +34,29 @@ def _log(message: str) -> None:
 
 
 def _same_point(a: Point, b: Point) -> bool:
-    """A move to where the pointer already is emits nothing.
-
-    `_move_and_click` travels to the element and THEN clicks at the point it
-    landed on, so without this every click would dispatch one redundant move at
-    the coordinate the trajectory just finished on.
-    """
+    """`click` travels then clicks at the landing point; without this every click dispatched one redundant move."""
     return abs(float(a[0]) - float(b[0])) < 1e-6 and abs(float(a[1]) - float(b[1])) < 1e-6
 
 
-#: Every inter-gesture wait the driver takes, named.
-#:
-#: A vocabulary rather than a number at each call site, because the whole point
-#: of the mode switch is that these differ per device — a finger dwells on a tap
-#: about four times as long as a mouse button is held, and neither number means
-#: anything to the caller who turned humanisation off. Each mode supplies its own
-#: table below; an unknown name yields no wait rather than raising, so adding a
-#: pause site cannot break a custom humanizer written against an older release.
-#:
-#:   tap      inside a click/tap, between press and release
-#:   between  between two taps of one batch (grid tiles)
-#:   grab     after pressing, before a drag starts moving
-#:   drop     after a drag arrives, before releasing
-#:   probe    between the slider's measurement nudges
-#:   settle   before releasing a slider — the release IS the submit, and some
-#:            vendors sample the final milliseconds of the gesture
-#:   key      between two typed characters
-PAUSE_KINDS = ("tap", "between", "grab", "drop", "probe", "settle", "key")
+def trajectory(start: Point, end: Point, frequency: int = 60) -> Tuple[List[Point], List[float]]:
+    """A recorded human movement morphed onto the endpoints; timings are cumulative ms."""
+    points, timings = generate_trajectory(start, end, frequency=frequency)
+    return [(float(x), float(y)) for x, y in points], [float(t) for t in timings]
 
 
 class Humanizer:
-    """The gesture vocabulary `page_solver` drives. Subclass or duck-type.
+    """The gesture vocabulary the driver speaks. Subclass or duck-type."""
 
-    A custom implementation only has to provide `move`, `press`, `release`,
-    `type_text` and `_pause_ms`; `click` and `drag` are composed from those and
-    are almost never worth overriding.
-    """
-
-    #: Mode name, for logs and for `SolveResult` reporting.
     name = "custom"
-    #: Whether this device has a cursor that can rest somewhere without
-    #: touching. False switches off every hover-for-realism behaviour — the
-    #: reCAPTCHA tile hover and the idle drift during inference — because on a
-    #: touchscreen those are not weak mimicry, they are impossible.
     hovers = False
+    PAUSES: Dict[PauseKind, Tuple[float, float]] = {}
 
     def __init__(self, start: Point = (0.0, 0.0)) -> None:
-        #: Where the pointer is now. Read by the solver for
-        #: `SolveResult.final_mouse_position`.
         self.at: Point = (float(start[0]), float(start[1]))
 
-    # -- lifecycle ---------------------------------------------------------
     def reset(self, page: Any) -> None:
-        """Called once at the top of each `solve()`. Drop per-page caches."""
+        pass
 
-    # -- primitives --------------------------------------------------------
     def move(self, page: Any, to: Point) -> None:
         raise NotImplementedError
 
@@ -134,258 +69,137 @@ class Humanizer:
     def type_text(self, page: Any, field: Any, text: str) -> bool:
         raise NotImplementedError
 
-    def _pause_ms(self, kind: str) -> float:
-        return 0.0
+    def _pause_ms(self, kind: PauseKind) -> float:
+        lo, hi = self.PAUSES.get(kind, (0.0, 0.0))
+        return random.uniform(lo, hi)
 
-    # -- composed ----------------------------------------------------------
-    def pause(self, kind: str) -> None:
+    def pause(self, kind: PauseKind) -> None:
         _delay(self._pause_ms(kind))
 
     def click(self, page: Any, to: Point) -> None:
         self.move(page, to)
         self.press(page)
-        self.pause("tap")
+        self.pause(PauseKind.TAP)
         self.release(page)
 
     def drag(self, page: Any, src: Point, dst: Point) -> None:
         self.move(page, src)
         self.press(page)
-        self.pause("grab")
+        self.pause(PauseKind.GRAB)
         self.move(page, dst)
-        self.pause("drop")
+        self.pause(PauseKind.DROP)
         self.release(page)
 
 
-# ---------------------------------------------------------------------------
-# Mouse — the historical behaviour, moved here unchanged
-# ---------------------------------------------------------------------------
-
-
 class MouseHumanizer(Humanizer):
-    """A hand on a mouse. Bezier arcs, Fitts's-law durations, overshoot.
-
-    Everything in here was `page_solver._smooth_move` / `_trace_path` /
-    `_seed_cursor` / `_viewport` before this module existed, and is unchanged:
-    the constants were measured, the camoufox workarounds were expensive to
-    find, and a refactor is not the place to revisit either.
-    """
-
-    name = "mouse"
+    name = HumanizationMode.MOUSE
     hovers = True
-
-    #: Inclusive ranges, in ms. See PAUSE_KINDS.
-    PAUSES: Dict[str, Tuple[float, float]] = {
-        "tap": (20.0, 50.0),
-        "between": (80.0, 160.0),
-        "grab": (50.0, 100.0),
-        "drop": (50.0, 100.0),
-        "probe": (40.0, 80.0),
-        "settle": (90.0, 210.0),
-        "key": (45.0, 135.0),
-    }
+    PAUSES = {PauseKind.TAP: (20.0, 50.0), PauseKind.BETWEEN: (80.0, 160.0), PauseKind.GRAB: (50.0, 100.0),
+              PauseKind.DROP: (50.0, 100.0), PauseKind.PROBE: (40.0, 80.0), PauseKind.SETTLE: (90.0, 210.0),
+              PauseKind.KEY: (45.0, 135.0)}
 
     def __init__(self, start: Point = (0.0, 0.0), frequency: int = 60) -> None:
         super().__init__(start)
         self._frequency = frequency
         self._viewport_cache: Optional[Dict[str, float]] = None
-        # See `_seed_cursor`: the (0, 0) origin wedges camoufox's humanised
-        # mouse, so the first move of each solve must step off it plainly.
+        self._down = False
         self._cursor_seeded = False
 
     def reset(self, page: Any) -> None:
         self._viewport_cache = None
         self._cursor_seeded = False
+        self._down = False
 
-    def _pause_ms(self, kind: str) -> float:
-        lo, hi = self.PAUSES.get(kind, (0.0, 0.0))
-        return random.uniform(lo, hi)
-
-    # -- viewport ----------------------------------------------------------
     def _viewport(self, page: Any) -> Optional[Dict[str, float]]:
-        """
-        The window we must keep the cursor inside, cached per solve.
-
-        MUST NOT be skipped and MUST NOT be guessed, because a mouse move to a
-        coordinate outside the window WEDGES camoufox. Its juggler humanises
-        each move into a trajectory, guards the intermediate points against the
-        bounds, and then dispatches the requested destination unguarded
-        ("Always finish exactly on the requested destination"). An out-of-window
-        destination fires as an exit event instead of eMouseMove, so no
-        hit-renderer ack comes back; dispatch is serialised on a process-global
-        activation chain, so that one missing ack hangs every later input event
-        forever. Symptom: `page.mouse.move()` never returns, 0% CPU, solve
-        appears dead. Same failure family as camoufox #225.
-
-        `page.viewport_size` is None under camoufox (it uses the real window
-        rather than a spoofed viewport), which is why this falls back to asking
-        the page itself instead of assuming a size.
-        """
-        if self._viewport_cache is not None:
-            return self._viewport_cache
-        try:
-            vp = page.viewport_size
-            if callable(vp):  # some adapters expose it as a method
-                vp = vp()
-            if vp and vp.get("width") and vp.get("height"):
-                self._viewport_cache = {"width": float(vp["width"]), "height": float(vp["height"])}
-                return self._viewport_cache
-        except Exception:
-            pass
-        try:
-            inner = page.evaluate("() => ({width: window.innerWidth, height: window.innerHeight})")
-            if inner and inner.get("width") and inner.get("height"):
-                self._viewport_cache = {
-                    "width": float(inner["width"]),
-                    "height": float(inner["height"]),
-                }
-                return self._viewport_cache
-        except Exception:
-            pass
-        return None
+        """The window to keep the cursor inside; None under camoufox, which reports no viewport."""
+        if self._viewport_cache is None:
+            for read in (lambda: page.viewport_size() if callable(page.viewport_size) else page.viewport_size,
+                         lambda: page.evaluate("() => ({width: window.innerWidth, height: window.innerHeight})")):
+                try:
+                    vp = read()
+                    if vp and vp.get("width") and vp.get("height"):
+                        self._viewport_cache = {"width": float(vp["width"]), "height": float(vp["height"])}
+                        break
+                except Exception:
+                    continue
+        return self._viewport_cache
 
     def _seed_cursor(self, page: Any) -> None:
-        """Move the cursor off its (0, 0) origin once per solve, in ONE plain
-        move, before any humanised trajectory runs.
-
-        Without this, the first trajectory of a solve begins at (0, 0) — the
-        exact window corner, because that is where the pointer starts and
-        nothing has moved it. Under camoufox's `humanize` juggler a short move
-        from that origin never returns: `page.mouse.move()` blocks forever at 0%
-        CPU, and since dispatch is serialised on a process-global activation
-        chain, every later input event blocks behind it too. The solve looks
-        hung with no error anywhere and the Tier 3 fixture run times out on all
-        three attempts.
-
-        Reduced to four lines against camoufox directly:
-
-            with Camoufox(headless=True, humanize=True) as b:
-                p = b.new_page(); p.goto("about:blank")
-                p.mouse.move(1.0, 1.0)      # never returns
-
-        The same move after ANY interior move completes in ~1.1s, which is what
-        makes this the fix rather than a workaround: it is the ORIGIN that is
-        poisoned, not the destination. Same failure family as camoufox #225.
-
-        Deliberately not routed through `move`: that would generate a trajectory
-        from (0, 0) and reintroduce exactly the move being avoided.
-        """
+        """One plain move off the (0, 0) origin per solve: a trajectory from the corner wedges camoufox."""
         if self._cursor_seeded:
             return
         self._cursor_seeded = True
         if self.at != (0.0, 0.0):
-            # The caller named a starting position. Stepping plainly to THAT
-            # satisfies this just as well as the centre does, and honouring it
-            # is the whole reason the option exists.
             cx, cy = self.at
         else:
             vp = self._viewport(page)
-            # Centre when the window is known, else a modest interior point —
-            # any coordinate comfortably off the corner will do.
             cx, cy = (vp["width"] / 2, vp["height"] / 2) if vp else (200.0, 200.0)
         try:
             page.mouse.move(cx, cy)
             self.at = (cx, cy)
-        except Exception:  # noqa: BLE001 — an adapter without a mouse must not fail the solve
+        except Exception:
             pass
 
-    # -- primitives --------------------------------------------------------
     def move(self, page: Any, to: Point) -> None:
         self._seed_cursor(page)
         if _same_point(self.at, to):
             return
-        points, timings = generate_trajectory(self.at, to, self._frequency)
+        points, timings = trajectory(self.at, to, self._frequency)
         self._trace(page, points, timings)
 
+    def _trace(self, page: Any, points: Sequence[Point], timings: Sequence[float]) -> None:
+        # Clamp only when the viewport is known: a guessed edge coordinate deadlocks camoufox's juggler.
+        viewport = self._viewport(page)
+        start = time.monotonic() * 1000.0
+        for (x, y), t in zip(points, timings):
+            x, y = float(x), float(y)
+            if viewport is not None:
+                x = max(1.0, min(x, viewport["width"] - 1.0))
+                y = max(1.0, min(y, viewport["height"] - 1.0))
+            try:
+                page.mouse.move(x, y)
+            except Exception as exc:
+                if "Target closed" in str(exc) or "Session closed" in str(exc):
+                    _log("could not move mouse; page or session closed")
+                    return
+                continue
+            self.at = (x, y)
+            _delay(start + t - time.monotonic() * 1000.0)
+
     def press(self, page: Any) -> None:
         page.mouse.down()
+        self._down = True
 
     def release(self, page: Any) -> None:
         page.mouse.up()
+        self._down = False
 
     def type_text(self, page: Any, field: Any, text: str) -> bool:
-        # A retry round arrives with the previous attempt still in the box, and
-        # typing would APPEND to it — submitting a string the model never read.
+        # Clear first: a retry round arrives with the previous attempt still in the box, and typing would append.
         try:
             page.keyboard.press("Control+A")
         except Exception:
             pass
-        # Per character rather than one `type(text, delay=…)` call: a constant
-        # inter-key delay is itself a signal, and these are the vendors that
-        # score typing cadence.
+        # Per character, not `type(text, delay=…)`: a constant inter-key delay is itself a signal these vendors score.
         for ch in text:
             try:
                 page.keyboard.type(ch)
             except Exception as exc:
                 _log(f"could not type into the captcha field: {exc}")
                 return False
-            self.pause("key")
+            self.pause(PauseKind.KEY)
         return True
 
-    def _trace(self, page: Any, points: Sequence[Point], timings: Sequence[float]) -> None:
-        # Clamp ONLY when the viewport is actually known.
-        #
-        # camoufox reports `viewport_size is None` (it uses the real window
-        # rather than a spoofed viewport). The obvious fallback — assume
-        # 1920x1080 — is actively harmful: it clamps coordinates to the edge of
-        # a viewport that is not the real one, and a coordinate sitting EXACTLY
-        # on the boundary is the input that deadlocks camoufox's humanised-mouse
-        # juggler patch (upstream #225, "humanize edge deadlock"). The symptom is
-        # a `page.mouse.move()` that never returns: the process sits at 0% CPU
-        # with no in-flight work and the solve appears hung, which is precisely
-        # what this driver did against camoufox until this was found.
-        #
-        # A guessed clamp buys nothing anyway — the points come from a
-        # trajectory between two on-screen elements, so they are already in
-        # range. When we do clamp, we inset by a pixel so a legitimately
-        # off-screen point lands just inside the edge instead of exactly on it.
-        viewport = self._viewport(page)
-
-        start = time.monotonic() * 1000.0
-        for i, (x, y) in enumerate(points):
-            try:
-                if viewport is None:
-                    cx, cy = float(x), float(y)
-                else:
-                    cx = max(1.0, min(float(x), float(viewport["width"]) - 1.0))
-                    cy = max(1.0, min(float(y), float(viewport["height"]) - 1.0))
-                page.mouse.move(cx, cy)
-                self.at = (cx, cy)
-                if i < len(timings):
-                    target = start + timings[i]
-                    _delay(target - time.monotonic() * 1000.0)
-            except Exception as exc:
-                msg = str(exc)
-                if "Target closed" in msg or "Session closed" in msg:
-                    _log("could not move mouse; page or session closed")
-                    return
-                # Any other per-sample failure is skipped rather than fatal —
-                # losing one mousemove must not lose the solve.
-
-
-# ---------------------------------------------------------------------------
-# Touch dispatch backends
-# ---------------------------------------------------------------------------
-
 
 class TouchBackend:
-    """Where touch events actually go.
-
-    Three methods rather than one per sample, because the two backends want
-    opposite things: CDP dispatches one event per call and we pace it locally,
-    while a W3C/Appium driver takes a whole timed action chain in one round trip
-    and paces it on the device. Handing `move` the entire leg lets each do what
-    it is good at — and on a real device, pacing over the wire is not pacing at
-    all.
-    """
+    """Where touch events go. `move` takes a whole leg of `(x, y, dt_ms)` samples."""
 
-    #: Human name for logs / errors.
     name = "touch"
 
     def down(self, x: float, y: float) -> None:
         raise NotImplementedError
 
     def move(self, path: Sequence[Tuple[float, float, float]]) -> None:
-        """`path` is (x, y, dt_ms) — dt is the wait BEFORE that sample."""
         raise NotImplementedError
 
     def up(self, x: float, y: float) -> None:
@@ -393,62 +207,30 @@ class TouchBackend:
 
 
 class CdpTouchBackend(TouchBackend):
-    """`Input.dispatchTouchEvent` over a CDP session on a Playwright page.
-
-    Chromium-family only, and that is checked at construction rather than
-    discovered per gesture: WebKit and Firefox (camoufox included) expose no
-    touch dispatch through Playwright at all, so the alternatives there are to
-    fail loudly or to quietly emit MOUSE events at a touch-only widget. The
-    second is worse than not running — the page's touch handlers never fire, the
-    solve fails for a reason nothing reports, and the report reads as a model
-    that cannot solve mobile puzzles.
-
-    The context must also have been created with `has_touch=True`, or the page
-    advertises no touch support to feature detection and a mobile widget renders
-    its desktop branch.
+    """`Input.dispatchTouchEvent` over CDP; Chromium-family pages launched with has_touch=True.
+
+    Checked at construction, not per gesture: WebKit and Firefox expose no touch dispatch, and emitting mouse
+    events at a touch widget instead is worse than not running (the report reads as a model that cannot solve mobile).
     """
 
     name = "cdp"
 
     def __init__(self, page: Any) -> None:
-        self._session = self._open(page)
-
-    @staticmethod
-    def _open(page: Any) -> Any:
         try:
-            context = page.context
-            if callable(context):
-                context = context()
-            return context.new_cdp_session(page)
-        except Exception as exc:  # noqa: BLE001 — the message is the whole value here
+            context = page.context() if callable(page.context) else page.context
+            self._session = context.new_cdp_session(page)
+        except Exception as exc:
             raise RuntimeError(
-                "mobile humanisation needs touch dispatch, and this page offers "
-                f"none ({exc}). Use a Chromium-family Playwright browser launched "
-                "with has_touch=True, or pass an Appium driver as "
-                "PageSolverConfig.touch_driver."
-            ) from exc
+                f"mobile humanisation needs touch dispatch, and this page offers none ({exc}). Use a "
+                "Chromium-family Playwright browser launched with has_touch=True, or pass an Appium "
+                "driver as PageSolverConfig.touch_driver.") from exc
 
     def _send(self, kind: str, points: Sequence[Tuple[float, float]]) -> None:
-        self._session.send(
-            "Input.dispatchTouchEvent",
-            {
-                "type": kind,
-                "touchPoints": [
-                    # radiusX/Y and force are what a real digitizer reports and
-                    # a synthetic tap does not. A vendor reading
-                    # `Touch.radiusX === 0` has a free bot signal otherwise.
-                    {
-                        "x": float(x),
-                        "y": float(y),
-                        "radiusX": random.uniform(8.0, 14.0),
-                        "radiusY": random.uniform(8.0, 14.0),
-                        "force": random.uniform(0.35, 0.75),
-                        "id": 1,
-                    }
-                    for x, y in points
-                ],
-            },
-        )
+        # radius and force are what a real digitizer reports; a synthetic tap reports zero.
+        self._session.send("Input.dispatchTouchEvent", {"type": kind, "touchPoints": [
+            {"x": float(x), "y": float(y), "radiusX": random.uniform(8.0, 14.0),
+             "radiusY": random.uniform(8.0, 14.0), "force": random.uniform(0.35, 0.75), "id": 1}
+            for x, y in points]})
 
     def down(self, x: float, y: float) -> None:
         self._send("touchStart", [(x, y)])
@@ -459,52 +241,21 @@ class CdpTouchBackend(TouchBackend):
             self._send("touchMove", [(x, y)])
 
     def up(self, x: float, y: float) -> None:
-        # touchEnd carries no touchPoints: the point being lifted is identified
-        # by its absence, which is what the protocol says and what a real
-        # release looks like.
         self._send("touchEnd", [])
 
 
 class AppiumTouchBackend(TouchBackend):
-    """W3C pointer actions with `pointerType: touch`, for Appium and Selenium.
-
-    Batches a whole leg into ONE action chain with per-sample durations, so the
-    kinematics are reproduced BY THE DEVICE rather than by a Python loop
-    round-tripping over the wire — over which a 90Hz path is not 90Hz at all.
-
-    Press and release are separate `perform()` calls on purpose. W3C input state
-    is per SESSION, so a pointer put down in one chain stays down across later
-    chains until it is lifted; that is what lets the puzzle-slider driver press,
-    screenshot, steer, screenshot and only then release. (It is also why the
-    spec has a "release actions" endpoint at all.)
-
-    COORDINATES. Everything upstream of here is CSS pixels in the page's
-    viewport, because that is what `bounding_box()` returns. A real device wants
-    screen pixels, and the two differ by the device pixel ratio and by whatever
-    chrome sits above the webview. Neither is guessable from here, so both are
-    parameters:
-
-        AppiumTouchBackend(driver, scale=3.0, origin=(0, 132))
-
-    `scale` is usually `window.devicePixelRatio`; `origin` is the top-left of
-    the webview in screen coordinates. Defaults are the identity transform,
-    which is correct for browser mobile emulation and for any caller who has
-    already mapped the coordinates themselves.
+    """W3C touch pointer actions for Appium and Selenium, paced by the device from one chain per leg.
+
+    Press and release are separate `perform` calls on purpose: W3C input state is per session, which is what
+    lets the slider press, screenshot, steer, screenshot and only then release. Raw protocol payload, so no client import.
     """
 
     name = "appium"
 
-    def __init__(
-        self,
-        driver: Any,
-        scale: Optional[float] = None,
-        origin: Optional[Point] = None,
-        page: Any = None,
-    ) -> None:
+    def __init__(self, driver: Any, scale: Optional[float] = None, origin: Optional[Point] = None,
+                 page: Any = None) -> None:
         self._driver = driver
-        # UNSET is not the same fact as an explicit 1.0. The first is a caller
-        # who has not thought about the transform; the second is one who has and
-        # says the coordinates are already mapped. Only the first is checked.
         self._scale_given = scale is not None
         self._scale = 1.0 if scale is None else float(scale)
         self._origin = (0.0, 0.0) if origin is None else (float(origin[0]), float(origin[1]))
@@ -512,111 +263,54 @@ class AppiumTouchBackend(TouchBackend):
         self._checked = False
 
     def _check_scale(self) -> None:
-        """Refuse an unset scale on a session that reports it is not 1.
-
-        A wrong transform fails SILENTLY on both sides of the wire: the chain is
-        valid W3C, the device performs it, and the finger lands somewhere else.
-        The solve then fails looking exactly like a model that cannot read the
-        puzzle. Same failure the fixture preflight and `_shot_scale` exist to
-        prevent, one seam over.
-
-        Read once, not per gesture — it is a round trip into the page and a
-        solve makes hundreds of these. An unreadable ratio is absent evidence,
-        not evidence of a mismatch, so it falls through to the identity.
-        `origin` cannot be measured from here at all, so it is named in the
-        refusal rather than guessed at.
+        """Refuse an unset scale on a device whose pixel ratio is not 1: the finger would land elsewhere, silently.
+
+        Read once, not per gesture (a solve makes hundreds); an unreadable ratio is absent evidence, so identity.
         """
         self._checked = True
-        if self._scale_given or self._page is None:
-            return
-        evaluate = getattr(self._page, "evaluate", None)
-        if evaluate is None:
+        if self._scale_given or self._page is None or not hasattr(self._page, "evaluate"):
             return
         try:
-            dpr = float(evaluate("() => window.devicePixelRatio"))
-        except Exception:  # noqa: BLE001 — cannot measure is not a mismatch
+            dpr = float(self._page.evaluate("() => window.devicePixelRatio"))
+        except Exception:
             return
         if abs(dpr - 1.0) < 1e-6:
             return
         raise RuntimeError(
-            f"the touch driver maps CSS pixels onto a device reporting "
-            f"devicePixelRatio {dpr:g}, and no scale was given. Every gesture "
-            f"would land at {1.0 / dpr:.2f}x the intended offset, and nothing "
-            f"would report it — the chain is valid, the device performs it, and "
-            f"the solve fails looking like a weak model.\n"
-            f"  Fix: touch_transform={{'scale': {dpr:g}, 'origin': (x, y)}}, "
-            f"where origin is the webview's top-left in SCREEN coordinates. "
-            f"That half cannot be measured from here.\n"
-            f"  Or pass scale=1 to assert the coordinates are already mapped."
-        )
+            f"the touch driver maps CSS pixels onto a device reporting devicePixelRatio {dpr:g}, and no "
+            f"scale was given. Fix: touch_transform={{'scale': {dpr:g}, 'origin': (x, y)}}, where origin "
+            "is the webview's top-left in SCREEN coordinates, or pass scale=1 to assert the coordinates "
+            "are already mapped.")
 
     def _map(self, x: float, y: float) -> Tuple[int, int]:
+        # Unset scale and an explicit 1.0 are different facts; only the first is checked.
         if not self._checked:
             self._check_scale()
-        return (
-            int(round(self._origin[0] + x * self._scale)),
-            int(round(self._origin[1] + y * self._scale)),
-        )
+        return int(round(self._origin[0] + x * self._scale)), int(round(self._origin[1] + y * self._scale))
 
     def _perform(self, actions: Sequence[Dict[str, Any]]) -> None:
-        """One W3C action chain on a single touch pointer.
-
-        Sent as the raw protocol payload rather than through Selenium's
-        `ActionBuilder`, so this needs no selenium import and works against any
-        client that speaks WebDriver — Appium's Python client, plain Selenium 4,
-        or a thin HTTP wrapper of someone's own.
-        """
-        payload = {
-            "actions": [
-                {
-                    "type": "pointer",
-                    "id": "ck-finger",
-                    "parameters": {"pointerType": "touch"},
-                    "actions": list(actions),
-                }
-            ]
-        }
-        # `execute` is the low-level WebDriver command hook every Selenium-family
-        # client exposes; `execute_actions` is what some Appium clients call the
-        # same thing. Try the specific name first so a client that validates the
-        # payload gets to.
-        for attempt in ("execute_actions", "execute"):
-            fn = getattr(self._driver, attempt, None)
-            if fn is None:
-                continue
-            if attempt == "execute_actions":
-                fn(payload["actions"])
-            else:
-                fn("actions", payload)
-            return
-        raise RuntimeError(
-            "the touch driver speaks neither execute_actions() nor "
-            "execute('actions', …); pass a WebDriver-compatible driver or a "
-            "custom TouchBackend."
-        )
+        chain = [{"type": "pointer", "id": "ck-finger", "parameters": {"pointerType": "touch"},
+                  "actions": list(actions)}]
+        if callable(getattr(self._driver, "execute_actions", None)):
+            self._driver.execute_actions(chain)
+        elif callable(getattr(self._driver, "execute", None)):
+            self._driver.execute("actions", {"actions": chain})
+        else:
+            raise RuntimeError("the touch driver speaks neither execute_actions() nor execute('actions', …); "
+                               "pass a WebDriver-compatible driver or a custom TouchBackend.")
 
     def down(self, x: float, y: float) -> None:
         mx, my = self._map(x, y)
-        self._perform([
-            {"type": "pointerMove", "duration": 0, "origin": "viewport", "x": mx, "y": my},
-            {"type": "pointerDown", "button": 0},
-        ])
+        self._perform([{"type": "pointerMove", "duration": 0, "origin": "viewport", "x": mx, "y": my},
+                       {"type": "pointerDown", "button": 0}])
 
     def move(self, path: Sequence[Tuple[float, float, float]]) -> None:
+        # The per-sample gap becomes the move's duration, so the device interpolates like a real finger.
         actions = []
         for x, y, dt_ms in path:
             mx, my = self._map(x, y)
-            # The per-sample gap becomes the move's DURATION, not a pause before
-            # it: the device then interpolates over that window and reports
-            # intermediate samples of its own, which is what a finger sliding
-            # across a digitizer actually produces.
-            actions.append({
-                "type": "pointerMove",
-                "duration": max(0, int(round(dt_ms))),
-                "origin": "viewport",
-                "x": mx,
-                "y": my,
-            })
+            actions.append({"type": "pointerMove", "duration": max(0, int(round(dt_ms))),
+                            "origin": "viewport", "x": mx, "y": my})
         if actions:
             self._perform(actions)
 
@@ -627,13 +321,7 @@ class AppiumTouchBackend(TouchBackend):
 
 
 class TouchscreenTouchBackend(TouchBackend):
-    """Playwright's `page.touchscreen.tap()` — taps only, no travel.
-
-    The fallback for a browser with touch support but no CDP (WebKit). A tap
-    still lands correctly; a DRAG cannot be expressed at all, so it raises
-    rather than approximating one with a mouse, for the reason in
-    `CdpTouchBackend`.
-    """
+    """Playwright's tap-only touchscreen, for browsers with touch but no CDP. A drag cannot be expressed."""
 
     name = "touchscreen"
 
@@ -645,11 +333,8 @@ class TouchscreenTouchBackend(TouchBackend):
         self._pending = (x, y)
 
     def move(self, path: Sequence[Tuple[float, float, float]]) -> None:
-        raise RuntimeError(
-            "this browser exposes taps but not touch travel, so a drag/slide "
-            "puzzle cannot be driven on it. Use a Chromium-family browser (CDP "
-            "touch dispatch) or an Appium driver."
-        )
+        raise RuntimeError("this browser exposes taps but not touch travel, so a drag/slide puzzle cannot be "
+                           "driven on it. Use a Chromium-family browser (CDP touch dispatch) or an Appium driver.")
 
     def up(self, x: float, y: float) -> None:
         at = self._pending or (x, y)
@@ -658,17 +343,8 @@ class TouchscreenTouchBackend(TouchBackend):
 
 
 def touch_backend_for(page: Any, driver: Any = None, **kwargs: Any) -> TouchBackend:
-    """Pick a backend. An explicit `driver` always wins.
-
-    `driver` is what a caller passes when the thing under automation is not the
-    thing being touched — an Appium session driving a real handset while the
-    page object is a webview bridge over it.
-    """
     if driver is not None:
-        if isinstance(driver, TouchBackend):
-            return driver
-        # The page comes along so the backend can ask what it is mapping ONTO.
-        return AppiumTouchBackend(driver, page=page, **kwargs)
+        return driver if isinstance(driver, TouchBackend) else AppiumTouchBackend(driver, page=page, **kwargs)
     try:
         return CdpTouchBackend(page)
     except RuntimeError:
@@ -678,56 +354,18 @@ def touch_backend_for(page: Any, driver: Any = None, **kwargs: Any) -> TouchBack
         raise
 
 
-# ---------------------------------------------------------------------------
-# Mobile
-# ---------------------------------------------------------------------------
-
-
 class MobileHumanizer(Humanizer):
-    """A finger on glass.
-
-    What differs from `MouseHumanizer`, and none of it is cosmetic:
-
-      - **A move that is not touching dispatches nothing.** There is no hover on
-        a touchscreen. The position is still RECORDED, because the next gesture
-        starts from it, but no event is emitted — emitting one would be the
-        desktop tell this mode exists to remove.
-      - **Taps carry a contact wobble.** A finger held on glass for 90ms does not
-        report one unchanging coordinate; the centroid of the contact patch
-        rolls a pixel or two under pressure. A tap with zero movement between
-        touchstart and touchend is a synthetic tap.
-      - **Touch kinematics**, via `generate_swipe` — see its docstring for why
-        that is a different model rather than the mouse one retuned.
-      - **Longer, more variable pauses.** Every measured touch interaction is
-        slower than its mouse equivalent, and a phone's are more variable
-        because the hand holding the device is also moving.
-    """
+    """A finger on glass: no hover, touch events only, slower and more variable pauses."""
 
-    name = "mobile"
+    name = HumanizationMode.MOBILE
     hovers = False
+    # Tap: measured human touch dwell clusters at 60-120ms. Key: a soft keyboard is ~3x slower than a physical one.
+    PAUSES = {PauseKind.TAP: (55.0, 130.0), PauseKind.BETWEEN: (140.0, 320.0), PauseKind.GRAB: (90.0, 190.0),
+              PauseKind.DROP: (80.0, 170.0), PauseKind.PROBE: (70.0, 140.0), PauseKind.SETTLE: (140.0, 300.0),
+              PauseKind.KEY: (110.0, 320.0)}
 
-    PAUSES: Dict[str, Tuple[float, float]] = {
-        # A tap's press-to-release. Measured human touch dwell clusters at
-        # 60-120ms; a synthesised one is usually 0.
-        "tap": (55.0, 130.0),
-        "between": (140.0, 320.0),
-        "grab": (90.0, 190.0),
-        "drop": (80.0, 170.0),
-        "probe": (70.0, 140.0),
-        "settle": (140.0, 300.0),
-        # Soft-keyboard typing, which is ~3x slower than a physical keyboard
-        # and much more variable.
-        "key": (110.0, 320.0),
-    }
-
-    def __init__(
-        self,
-        start: Point = (0.0, 0.0),
-        backend: Any = None,
-        driver: Any = None,
-        frequency: int = 90,
-        **backend_kwargs: Any,
-    ) -> None:
+    def __init__(self, start: Point = (0.0, 0.0), backend: Any = None, driver: Any = None,
+                 frequency: int = 90, **backend_kwargs: Any) -> None:
         super().__init__(start)
         self._backend: Optional[TouchBackend] = backend
         self._driver = driver
@@ -736,13 +374,11 @@ class MobileHumanizer(Humanizer):
         self._down = False
 
     def reset(self, page: Any) -> None:
-        # A solve that ended mid-gesture (a timeout inside the slider) leaves a
-        # pointer down in the SESSION's input state, and the next chain would
-        # then start from a finger already on the glass. Lift it.
+        # A solve that timed out mid-gesture leaves a pointer down in the session's input state; lift it.
         if self._down:
             try:
                 self._touch(page).up(*self.at)
-            except Exception:  # noqa: BLE001 — best effort; a stale pointer must not fail a solve
+            except Exception:
                 pass
             self._down = False
 
@@ -751,22 +387,12 @@ class MobileHumanizer(Humanizer):
             self._backend = touch_backend_for(page, self._driver, **self._backend_kwargs)
         return self._backend
 
-    def _pause_ms(self, kind: str) -> float:
-        lo, hi = self.PAUSES.get(kind, (0.0, 0.0))
-        return random.uniform(lo, hi)
-
     def move(self, page: Any, to: Point) -> None:
         to = (float(to[0]), float(to[1]))
-        if not self._down:
-            # No contact, no events. Just remember where the next touch lands.
-            self.at = to
-            return
-        points, timings = generate_swipe(self.at, to, self._frequency)
-        path = [
-            (x, y, timings[i] - (timings[i - 1] if i else 0.0))
-            for i, (x, y) in enumerate(points)
-        ]
-        self._touch(page).move(path)
+        if self._down:
+            points, timings = trajectory(self.at, to, self._frequency)
+            self._touch(page).move([(x, y, timings[i] - (timings[i - 1] if i else 0.0))
+                                    for i, (x, y) in enumerate(points)])
         self.at = to
 
     def press(self, page: Any) -> None:
@@ -778,83 +404,55 @@ class MobileHumanizer(Humanizer):
         self._down = False
 
     def click(self, page: Any, to: Point) -> None:
-        """Tap. The wobble is the point — see the class docstring."""
+        """A tap whose contact patch wobbles a pixel while held; a motionless tap is a synthetic one."""
         self.move(page, to)
         self.press(page)
-        held = self._pause_ms("tap")
+        held = self._pause_ms(PauseKind.TAP)
         _delay(held * 0.5)
         try:
-            self._touch(page).move([
-                (self.at[0] + random.gauss(0.0, 0.9), self.at[1] + random.gauss(0.0, 0.9), 0.0)
-            ])
-        except Exception:  # noqa: BLE001 — a tap-only backend cannot wobble; the tap still lands
+            self._touch(page).move([(self.at[0] + random.gauss(0.0, 0.9), self.at[1] + random.gauss(0.0, 0.9), 0.0)])
+        except Exception:
             pass
         _delay(held * 0.5)
         self.release(page)
 
     def type_text(self, page: Any, field: Any, text: str) -> bool:
-        """Into the field, at soft-keyboard pace.
-
-        The mouse path clears with Control+A. There is no Control on a phone
-        keyboard, so the box is cleared through the element instead — which also
-        works on an Appium `WebElement`, where `page.keyboard` does not exist.
-        """
-        for clear in ("clear", "fill"):
+        # Cleared through the element: there is no Control key on a phone, and no `page.keyboard` on Appium.
+        for clear, arg in (("clear", ()), ("fill", ("",))):
             fn = getattr(field, clear, None)
-            if fn is None:
-                continue
-            try:
-                fn() if clear == "clear" else fn("")
-                break
-            except Exception:  # noqa: BLE001 — an uncleared box is recoverable; a crash is not
-                continue
-
+            if fn is not None:
+                try:
+                    fn(*arg)
+                    break
+                except Exception:
+                    continue
         send = getattr(field, "send_keys", None)
         for ch in text:
             try:
-                if send is not None:
-                    send(ch)          # Appium / Selenium WebElement
-                else:
-                    page.keyboard.type(ch)   # Playwright mobile emulation
+                send(ch) if send is not None else page.keyboard.type(ch)
             except Exception as exc:
                 _log(f"could not type into the captcha field: {exc}")
                 return False
-            self.pause("key")
+            self.pause(PauseKind.KEY)
         return True
 
 
-# ---------------------------------------------------------------------------
-# None
-# ---------------------------------------------------------------------------
-
-
 class NullHumanizer(Humanizer):
-    """No humanisation: the shortest legal path to the same DOM effect.
-
-    One mousemove per gesture instead of sixty, no dwell, no jitter, and text
-    goes in with a single `fill()`. Roughly an order of magnitude faster on a
-    slider puzzle, and it will be detected by anything that scores pointer
-    telemetry — which is the whole trade, stated plainly. For fixtures, for
-    self-hosted targets, and for callers whose stack humanises somewhere else.
+    """No humanisation: one move per gesture and a single fill. Fast, and detectable.
 
-    Still moves the mouse and still presses and releases: the events are what
-    make the widget respond at all, and a click dispatched with no preceding
-    move fails on the vendors that require a hover state first.
+    Still moves and presses: a click dispatched with no preceding move fails on vendors that need a hover state first.
     """
 
-    name = "none"
+    name = HumanizationMode.NONE
     hovers = False
 
-    def reset(self, page: Any) -> None:
-        pass
-
     def move(self, page: Any, to: Point) -> None:
         if _same_point(self.at, to):
             return
         self.at = (float(to[0]), float(to[1]))
         try:
-            page.mouse.move(self.at[0], self.at[1])
-        except Exception as exc:  # noqa: BLE001
+            page.mouse.move(*self.at)
+        except Exception as exc:
             if "Target closed" in str(exc) or "Session closed" in str(exc):
                 _log("could not move mouse; page or session closed")
 
@@ -866,7 +464,7 @@ class NullHumanizer(Humanizer):
 
     def type_text(self, page: Any, field: Any, text: str) -> bool:
         try:
-            field.fill(text)     # replaces, so no Control+A round is needed
+            field.fill(text)
             return True
         except Exception:
             pass
@@ -882,48 +480,27 @@ class NullHumanizer(Humanizer):
             return False
 
 
-# ---------------------------------------------------------------------------
-# Resolution
-# ---------------------------------------------------------------------------
-
-MODES = {"mouse": MouseHumanizer, "mobile": MobileHumanizer, "none": NullHumanizer}
+MODES = {HumanizationMode.MOUSE: MouseHumanizer, HumanizationMode.MOBILE: MobileHumanizer,
+         HumanizationMode.NONE: NullHumanizer}
 
 
 def resolve(config: Any) -> Humanizer:
-    """The humanizer one `PageSolver` will use, from its config.
-
-    Precedence, and the reasoning for it:
-
-      1. `config.humanizer` — a caller who handed us an OBJECT has already
-         decided; there is nothing left to select.
-      2. `config.humanization` — an explicit mode set in code.
-      3. `CAPTCHA_HUMANIZATION` — for a caller who cannot edit the code.
-      4. "mouse".
+    """`config.humanizer`, else `config.humanization`, else CAPTCHA_HUMANIZATION, else mouse.
 
-    Note that the env var loses to code, which is the opposite of this package's
-    model-identity settings. Deliberate: which mode is right is a property of
-    the PAGE the caller is driving, and an env var flipping a desktop solve to
-    touch dispatch would break every one of them silently. Pinning a model is a
-    deployment decision; picking an input device is not.
+    The env var loses to code, the opposite of the model-identity settings, because the right mode is a
+    property of the page: an env var flipping a desktop solve to touch dispatch would break every one silently.
     """
     custom = getattr(config, "humanizer", None)
     if custom is not None:
         return custom
-
-    mode = getattr(config, "humanization", None) or os.getenv("CAPTCHA_HUMANIZATION") or "mouse"
-    mode = str(mode).strip().lower()
-    if mode not in MODES:
-        raise ValueError(
-            f"unknown humanization mode {mode!r}; expected one of "
-            f"{', '.join(sorted(MODES))}, or pass your own object as "
-            f"PageSolverConfig.humanizer"
-        )
-
+    raw = str(getattr(config, "humanization", None) or os.getenv("CAPTCHA_HUMANIZATION") or "mouse").strip().lower()
+    try:
+        mode = HumanizationMode(raw)
+    except ValueError:
+        raise ValueError(f"unknown humanization mode {raw!r}; expected one of {', '.join(sorted(MODES))}, "
+                         "or pass your own object as PageSolverConfig.humanizer") from None
     start = getattr(config, "starting_mouse_position", None) or (0.0, 0.0)
-    if mode == "mobile":
-        return MobileHumanizer(
-            start,
-            driver=getattr(config, "touch_driver", None),
-            **(getattr(config, "touch_transform", None) or {}),
-        )
+    if mode is HumanizationMode.MOBILE:
+        return MobileHumanizer(start, driver=getattr(config, "touch_driver", None),
+                               **(getattr(config, "touch_transform", None) or {}))
     return MODES[mode](start)