capacitor-plugin-ihealth 1.1.0

package/ios/Plugin/iHealthSDKHeaders/IDOFoundationCommand.h

@@ -0,0 +1,1178 @@
+//
+//  IDOAllOrder.h
+//  VeryfitSDK
+//
+//  Created by hedongyang on 2018/6/12.
+//  Copyright © 2018年 hedongyang. All rights reserved.
+//
+
+
+
+#import <Foundation/Foundation.h>
+#if __has_include(<IDOBluetoothInternal/IDOBluetoothInternal.h>)
+#elif __has_include(<IDOBlueProtocol/IDOBlueProtocol.h>)
+#else
+#import "IDOBindEnum.h"
+#import "IDOBluetoothBaseModel.h"
+#import "IDOGetInfoBluetoothModel.h"
+#import "IDOSetInfoBluetoothModel.h"
+#import "IDODataExchangeModel.h"
+#endif
+
+@interface IDOFoundationCommand : NSObject
+
+#pragma mark ======= control Command =======
+
+/**
+ 设备进入ota模式通知 |  Notification of device enter ota mode
+ */
++ (void)didOta;
+
+/**
+ 设备退出ota模式通知 |  Notification of device exit ota mode
+ */
++ (void)disOta;
+
+/**
+ 断开发送通知 | Disconnect notification
+ */
++ (void)disConnect;
+
+/**
+ * 连接失败通知 | connection failed
+ */
++ (void)connectionFailed;
+
+/**
+ * 发送提示消息 （只用于DH项目中） | Send prompt message （used only for DH）
+ */
++ (void)sendPromptInformation:(NSString*_Nullable)info;
+
+/**
+ * @brief 音乐开始 | Music begins
+ * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)musicStartCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 音乐结束 | End of music
+ * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)musicStopCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 相机开始 | Camera starts
+ * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)cameraStartCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 相机结束 | Camera ends
+ * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)cameraStopCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 开始寻找设备 | Start looking for equipment
+ * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)findDeviceStartCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 结束寻找设备 | End finding equipment
+ * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)findDeviceStopCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 打开ANCS(苹果通知中心) | Open ANCS (Apple Notification Center)
+ * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)belOpenAncsCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 关闭ANCS(苹果通知中心) | Close ANCS (Apple Notification Center)
+ * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)belCloseAncsCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设备绑定 | Device Binding
+ * @param bindModel 绑定 model (IDOSetBindingInfoBluetoothModel) (只有在授权绑定才会存储数据)
+ * Binding model (IDOSetBindingInfoBluetoothModel) (Data will only be stored if the binding is authorized)
+ * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)bindingCommand:(IDOSetBindingInfoBluetoothModel * _Nullable)bindModel
+              callback:(void (^_Nullable)(IDO_BIND_STATUS status, int errorCode))callback;
+
+/**
+ * @brief 连线设备解绑 | Unbundling equipment
+ * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)unbindingCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 解绑切换设备,但不删除手环和app数据 | switch device not delete the bracelet and app data
+ * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)switchDeviceCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设备强制解绑,设备连接时,双方解绑,设备断开时,app单方解绑 | Device forced unbundling
+ * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)mandatoryUnbindingCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 手环主动解绑 | Active unbinding of the bracelet
+ * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str,state:0x00:无效，0x01:手环已经解绑)
+ * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr,state:0x00:invalid，0x01:bracelet has been untied)
+ */
++ (void)braceletUnbundlingCommand:(void(^_Nullable)(int errorCode,int state))callback;
+
+/**
+ * @brief 设备配置复位 | Device Configuration Reset
+ * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)setDefaultConfigCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 控制设备重启(重启设备后手环会马上断线) | Control device restart （The bracelet disconnects immediately after restarting the device）
+ * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)setAppRebootCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 获取扩展功能列表 | Get the list of extended features
+ * @param callback 执行回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Execute callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)getFuncTableExCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设备进入ota升级模式 | The device enters the ota upgrade mode.
+ * @param callback 执行回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Execute callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ * state 0x00 : 成功；0x01 ：电量过低；0x02 ：设备不支持；0x03 ：参数不正确 | 0x00: success; 0x01: low power; 0x02: device not supported; 0x03: parameter error
+ */
++ (void)setOtaCommand:(void(^_Nullable)(int state , int errorCode))callback;
+
+/**
+ * @brief 手环检查版本号 | The bracelet checks the version number.
+ * @param model | check update version numbder model
+ * @param callback 执行回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Execute callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ * state 0x00 : 请求成功；0x01 ：发生失败；
+ * state 0x00: success; 0x01: failed;
+ */
++ (void)checkUpdateReplyCommand:(IDOCheckUpdateBluetoothModel *_Nullable)model
+                       callback:(void(^_Nullable)(int state , int errorCode))callback;
+
+#pragma mark ======= set Command =======
+
+/**
+ * @brief  设置授权码绑定 | Set Authorization Code Binding
+ * @param bindModel 绑定 model (IDOSetBindingInfoBluetoothModel) | binding model
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setAuthCodeCommand:(IDOSetBindingInfoBluetoothModel * _Nullable)bindModel callback:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置当前时间 | Set current time
+ * @param timeModel 时间 model (IDOSetTimeInfoBluetoothModel) | time model (IDOSetTimeInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setCurrentTimeCommand:(IDOSetTimeInfoBluetoothModel * _Nullable)timeModel callback:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置闹钟 | Set an alarm
+ * @param alarmModel 闹钟 model (IDOSetAlarmInfoBluetoothModel) | Alarm clock model (IDOSetAlarmInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setAlarmCommand:(IDOSetAlarmInfoBluetoothModel * _Nullable)alarmModel callback:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 批量设置闹钟 | Set alarms in batches
+ * @param alarmModels 闹钟集合 model (IDOSetAlarmInfoBluetoothModel) | Alarm clock collection model (IDOSetAlarmInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setAllAlarmsCommand:(NSArray <IDOSetAlarmInfoBluetoothModel *> * _Nullable)alarmModels callback:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置用户信息 | Setting user information
+ * @param userModel 用户信息 model (IDOSetUserInfoBuletoothModel) | User Information model (IDOSetUserInfoBuletoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setUserInfoCommand:(IDOSetUserInfoBuletoothModel * _Nullable)userModel callback:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置卡路里和距离目标 | Set calories and distance targets
+ * @param userModel 用户信息 model (IDOSetUserInfoBuletoothModel) | User Information model (IDOSetUserInfoBuletoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setCalorieAndDistanceGoalCommand:(IDOSetUserInfoBuletoothModel * _Nullable)userModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置目标 | Setting goals
+
+ * @param targetModel 目标信息 model (IDOSetUserInfoBuletoothModel) | targetModel target information model (IDOSetUserInfoBuletoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setTargetInfoCommand:(IDOSetUserInfoBuletoothModel * _Nullable)targetModel callback:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置通知中心、来电提醒开关 ⚠️在配对过程中不要执行其他命令。如果设备没有配对，会发起配对，等配对成功后再执行设置子开关状态，需要配对耗时比较长请监听回调。
+ * Set up notification center, call alert switch.⚠️Do not execute other commands during pairing.
+ * If there is no pairing on the device, a pairing will be initiated, and the sub-switch state will be set after the pairing is successful.
+ * If pairing takes a long time, please listen for the callback.
+ * @param noticModel 通知开关信息 model (IDOSetNoticeInfoBuletoothModel)
+ * Notification switch information model (IDOSetNoticeInfoBuletoothModel)
+ * @param callback 设置后配对过程状态回调 stateCode:0x00为不明异常超时,0x01为系统配对成功,0x02为取消配对,isNeedDisconnect:是否需要断开重连,is need to disconnect and reconnect
+ * stateCode :0x00 indicates an unknown abnormal timeout,0x01 indicates successful system pairing, and 0x02 indicates unpairing
+ * @param complete 设置后完成配对回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setSwitchNoticeCommand:(IDOSetNoticeInfoBuletoothModel * _Nullable)noticModel
+                      callback:(void (^_Nullable)(BOOL isNeedDisconnect,int stateCode))callback
+                      complete:(void (^_Nullable)(int errorCode))complete;
+
+/**
+ * @brief 设置通知中心、来电提醒开关，此方法只设置子开关状态。
+ * Set up notification center, call alert switch.method sets only the subswitch state
+ * @param noticModel 通知开关信息 model (IDOSetNoticeInfoBuletoothModel)
+ * Notification switch information model (IDOSetNoticeInfoBuletoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setChildSwitchNoticeStateCommand:(IDOSetNoticeInfoBuletoothModel * _Nullable)noticModel callback:(void (^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置蓝牙配对 (不可重复设置,会引起无法再连接设备.只要配对成功,就不需要再设置,只有获取到系统配对设备被忽略,才可设置配对。⚠️在配对过程中不要执行其他命令。)
+ * Set up Bluetooth pairing (cannot be set repeatedly, it will cause the device to be connected again. As long as the pairing is successful,
+ * you don't need to set it again. Only when the system pairing device is ignored, the pairing can be set.⚠️Do not execute other commands during pairing.)
+ * @param callback 设置后配对过程状态回调 stateCode:0x00为不明异常超时,0x01为系统配对成功,0x02为取消配对,isNeedDisconnect:是否需要断开重连,is need to disconnect and reconnect
+ * stateCode :0x00 indicates an unknown abnormal timeout,0x01 indicates successful system pairing, and 0x02 indicates unpairing
+ * @param complete 设置后完成配对回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setBluetoothPairingCommandWithCallback:(void (^_Nullable)(BOOL isNeedDisconnect,int stateCode))callback
+                               pairingComplete:(void (^_Nullable)(int errorCode))complete;
+
+/**
+ * @brief 设置寻找手机 | Set looking for a mobile phone
+ * @param findModel 寻找手机信息 model (IDOSetFindPhoneInfoBuletoothModel)
+ * Find mobile information model (IDOSetFindPhoneInfoBuletoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setFindPhoneCommand:(IDOSetFindPhoneInfoBuletoothModel * _Nullable)findModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置抬腕 | Set the wrist
+ * @param handUpmodel 抬腕信息 model (IDOSetHandUpInfoBuletoothModel)
+ * Wrist information model (IDOSetHandUpInfoBuletoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setHandUpCommand:(IDOSetHandUpInfoBuletoothModel * _Nullable)handUpmodel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置左右手佩戴 | Set the left and right hand to wear
+ * @param handModel 左右手佩戴 model (IDOSetLeftOrRightInfoBuletoothModel)
+ * Left and right hand wearing model (IDOSetLeftOrRightInfoBuletoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setLeftRightHandCommand:(IDOSetLeftOrRightInfoBuletoothModel *_Nullable)handModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置音乐开关 | Set music switch
+ * @param openMusicModel 音乐开关 model (IDOSetMusicOpenInfoBuletoothModel)
+ * Music Switch model (IDOSetMusicOpenInfoBuletoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setOpenMusicCommand:(IDOSetMusicOpenInfoBuletoothModel * _Nullable)openMusicModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置预防丢失 | Set to prevent loss
+
+ * @param lostModel 预防丢失 model (IDOSetPreventLostInfoBuletoothModel)
+ * Prevent loss model (IDOSetPreventLostInfoBuletoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setPreventLostCommand:(IDOSetPreventLostInfoBuletoothModel * _Nullable)lostModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置显示模式 | Setting the display mode
+ * @param displaModel 显示模式 model (IDOSetDisplayModeInfoBluetoothModel)
+ * Display mode model (IDOSetDisplayModeInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setDisplayModeCommand:(IDOSetDisplayModeInfoBluetoothModel * _Nullable)displaModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置久坐 | Set sedentary
+ * @param longSitModel 久坐 model (IDOSetLongSitInfoBuletoothModel)
+ * Sedentary model (IDOSetLongSitInfoBuletoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setLongSitCommand:(IDOSetLongSitInfoBuletoothModel * _Nullable)longSitModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置天气预报开关 | Set the weather forecast switch
+ * @param weatherModel 天气预报开关 model (IDOSetWeatherSwitchInfoBluetoothModel)
+ * Weather Forecast Switch model (IDOSetWeatherSwitchInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setWeatherCommand:(IDOSetWeatherSwitchInfoBluetoothModel * _Nullable)weatherModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置心率模式 | Set heart rate mode
+ * @param hrModeModel 心率模式 model (IDOSetHRModeInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setHrModeCommand:(IDOSetHrModeInfoBluetoothModel * _Nullable)hrModeModel callback:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置防打扰模式 | Set the anti-disturb mode
+ * @param noDisturbModeModel 防打扰模式 model (IDOSetNoDisturbModeInfoBluetoothModel)
+ * Anti-disturbance mode model (IDOSetNoDisturbModeInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setNoDisturbModeCommand:(IDOSetNoDisturbModeInfoBluetoothModel * _Nullable)noDisturbModeModel callback:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置心率间隔 | Set heart rate interval
+ * @param hrIntervalModel 心率间隔 model (IDOSetHrIntervalInfoBluetoothModel)
+ * Heart Rate Interval model (IDOSetHrIntervalInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setHrIntervalCommand:(IDOSetHrIntervalInfoBluetoothModel * _Nullable)hrIntervalModel callback:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置单位 | Setting unit
+ * @param unitModel 单位 model (IDOSetUnitInfoBluetoothModel) | unit model (IDOSetUnitInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setUnitCommand:(IDOSetUnitInfoBluetoothModel * _Nullable)unitModel callback:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置一键呼叫 | Set up a one-click call
+ * @param oneKeySOSModel 一键呼叫 model (IDOSetOneKeySosInfoBuletoothModel)
+ * One-click calling model (IDOSetOneKeySosInfoBuletoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setOneKeySosCommand:(IDOSetOneKeySosInfoBuletoothModel * _Nullable)oneKeySOSModel callback:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置快捷方式 | Setting shortcuts
+ * @param shortcutModel 快捷方式 model (IDOSetShortcutInfoBluetoothModel) | Shortcut model (IDOSetShortcutInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setShortcutCommand:(IDOSetShortcutInfoBluetoothModel * _Nullable)shortcutModel callback:(void(^_Nullable)(int errorCode))callback;
+
+
+/**
+ * @brief 设置血压舒张、收缩 | Set blood pressure to relax and contract
+ * @param calModel 血压舒张、收缩 model (IDOSetBloodPressureInfoBluetoothModel)
+ * Blood pressure diastolic, contraction model (IDOSetBloodPressureInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str ; model包含校准状态值)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setBpCalCommand:(IDOSetBloodPressureInfoBluetoothModel * _Nullable)calModel
+               callback:(void(^_Nullable)(int errorCode,IDOSetBloodPressureInfoBluetoothModel * _Nullable model))callback;
+
+/**
+ * @brief 设置运动快捷方式 | Set motion shortcuts
+ * @param sportSelectModel 运动快捷方式 model (IDOSetSportShortcutInfoBluetoothModel)
+ * Sports shortcut model (IDOSetSportShortcutInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setSportModeSelectCommand:(IDOSetSportShortcutInfoBluetoothModel * _Nullable)sportSelectModel callback:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置运动模式排序 | Set motion shortcuts
+ * @param sportSortModel 运动模式排序 model (IDOSetSportSortingInfoBluetoothModel)
+ * sport mode sort Model (IDOSetSportSortingInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setSportModeSortCommand:(IDOSetSportSortingInfoBluetoothModel * _Nullable)sportSortModel callback:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置天气预报数据 | Set weather forecast data
+ * @param weatherDataModel 天气预报数据 model (IDOSetWeatherDataInfoBluetoothModel)
+ * Weather Forecast Data model (IDOSetWeatherDataInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setWeatherDataCommand:(IDOSetWeatherDataInfoBluetoothModel *_Nullable)weatherDataModel
+                     callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置天气预报数据 (定制扩展功能数据不存储) | Set city name (Extend functionality)
+ * @param weatherData 天气预报数据 @{@"today":weatherModel,@"city":@"",@"oneHourWeather":@[@{@"type":@(0),@"temp":@(0)}...]}
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+*/
++ (void)setWeatherDataExtensionCommand:(NSDictionary *_Nullable)weatherData
+                              callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置iot按钮集合 (定制扩展功能数据不存储) | Set of iot buttons (Extend functionality)
+ * @param buttonNames iot按钮集合最多可以设置20个按钮 @[@{@"index":@(0),@"button":@""}...]
+ * callback 设置按钮集合回调进度 (0~1)  | Set the button progress  callback (0~1)
+ * @param complete 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post complete (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+*/
++ (void)setIotButtonNamesCommand:(NSArray <NSDictionary * >* _Nullable)buttonNames
+                        callback:(void (^ _Nullable)(float progress))callback
+                        complete:(void (^ _Nullable)(int errorCode))complete;
+
+/**
+ * @brief 设置屏幕亮度 | Set screen brightness
+ * @param screenBrightnessModel 屏幕亮度 model (IDOSetScreenBrightnessInfoBluetoothModel)
+ * Screen Brightness model (IDOSetScreenBrightnessInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setScreenBrightnessCommand:(IDOSetScreenBrightnessInfoBluetoothModel * _Nullable)screenBrightnessModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief  设置GPS信息 | Set GPS information
+ * @param gpsInfoModel GPS信息 model (IDOSetGpsConfigInfoBluetoothModel)
+ * GPS information model (IDOSetGpsConfigInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setGpsInfoCommand:(IDOSetGpsConfigInfoBluetoothModel * _Nullable)gpsInfoModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置GPS控制信息 | Set GPS Control Information
+ * @param gpsControlModel GPS控制信息 model (IDOSetGpsControlInfoBluetoothModel)
+ * GPS Control Information model (IDOSetGpsControlInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) (status 0 : 写入失败 , 1 : 正在写入 , 2 : 写入完成)
+ */
++ (void)setGpsControlCommand:(IDOSetGpsControlInfoBluetoothModel * _Nullable)gpsControlModel
+                    callback:(void (^ _Nullable)(int status,int errorCode))callback;
+
+/**
+ * @brief 设置控制连接参数 | Setting Control Connection Parameters
+ * @param connParamModel 控制连接参数 model (IDOSetConnParamInfoBluetoothModel)
+ * Control connection parameters model (IDOSetConnParamInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setConnParamCommand:(IDOSetConnParamInfoBluetoothModel * _Nullable)connParamModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief  设置热启动参数 | Setting hot start parameters
+ * @param hotStartParamModel 热启动参数 model (IDOGetHotStartParamBluetoothModel)
+ * Hot Start Parameters model (IDOGetHotStartParamBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setHotStartParamCommand:(IDOGetHotStartParamBluetoothModel * _Nullable)hotStartParamModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief   设置传感器实时数据 | Set sensor real-time data
+ * @param realTimeModel 传感器实时数据 model (IDOSetRealTimeSensorDataInfoBluetoothModel)
+ * Sensor real-time data model (IDOSetRealTimeSensorDataInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setRealTimeSensorDataCommand:(IDOSetRealTimeSensorDataInfoBluetoothModel * _Nullable)realTimeModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置马达参数 | Setting the motor parameters
+ * @param startMotorModel 马达参数 model (IDOSetStartMotorInfoBluetoothModel)
+ * Motor Parameter model (IDOSetStartMotorInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setStartMotorCommand:(IDOSetStartMotorInfoBluetoothModel * _Nullable)startMotorModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+
+/**
+ * @brief 设置表盘参数 | Setting the dial parameters
+ * @param watchDiaModel 表盘参数 model (IDOSetWatchDiaInfoBluetoothModel)
+ * Dial Parameters model (IDOSetWatchDiaInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setWatchDiaCommand:(IDOSetWatchDiaInfoBluetoothModel * _Nullable)watchDiaModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+
+/**
+ * @brief 设置血压测量参数 | Setting blood pressure measurement parameters
+ * @param bpMeasureModel 血压测量参数 model (IDOSetBpMeasureInfoBluetoothModel)
+ * Blood pressure measurement parameters model (IDOSetBpMeasureInfoBluetoothModel)
+ * @param callback 设置回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str ; model实时血压数据和状态)
+ * Set callback (errorCode: 0 transmission succeeded, other values are wrong, error code str can be obtained according to IDOErrorCodeToStr;
+ * model real-time blood pressure data and status)
+ */
++ (void)setBpMeasureCommand:(IDOSetBpMeasureInfoBluetoothModel * _Nullable)bpMeasureModel
+                   callback:(void (^ _Nullable)(int errorCode,IDOSetBpMeasureInfoBluetoothModel * _Nullable model))callback;;
+
+
+/**
+ * @brief 设置睡眠时间段 | Setting the sleep period
+ * @param sleepPeriodModel 睡眠时间段 model (IDOSetSleepPeriodInfoBluetoothModel)
+ * Sleep time period model (IDOSetSleepPeriodInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setSleepPeriodCommand:(IDOSetSleepPeriodInfoBluetoothModel * _Nullable)sleepPeriodModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置女性生理周期 (id205) | Setting the female physiological cycle (id205)
+ * @param menstrualModel 女性生理周期 model (IDOSetMenstruationInfoBluetoothModel)
+ * Female Physiological Cycle model (IDOSetMenstruationInfoBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setMenstrualCommand:(IDOSetMenstruationInfoBluetoothModel * _Nullable)menstrualModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+
+/**
+ * @brief 设置女性生理周期提醒 (id205) | Set Women's Physiological Cycle Reminder (id205)
+ * @param remindModel 女性生理周期提醒 model (IDOSetMenstruationRemindBluetoothModel)
+ * Female Physiological Cycle Reminder model (IDOSetMenstruationRemindBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setMenstrualRemindCommand:(IDOSetMenstruationRemindBluetoothModel * _Nullable)remindModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置每分钟呼吸次数 (139)  | Breaths per minute
+ * @param breatheModel 每分钟呼吸次数 model (IDOSetBreatheTrainBluetoothModel)
+ * Breaths per minute model (IDOSetBreatheTrainBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setBreatheTrainCommand:(IDOSetBreatheTrainBluetoothModel * _Nullable)breatheModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置走动提醒开关 (139) | Walking reminder switch
+ * @param walkModel 走动提醒开关 model (IDOSetWalkReminderBluetoothModel)
+ * Walking reminder switch model (IDOSetWalkReminderBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setWalkReminderCommand:(IDOSetWalkReminderBluetoothModel * _Nullable)walkModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置血氧开关 (139) | blood oxygen switch
+ * @param spo2Model 血氧开关 model (IDOSetSpo2SwitchBluetoothModel)
+ * blood oxygen switch model (IDOSetSpo2SwitchBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setSpo2SwitchCommand:(IDOSetSpo2SwitchBluetoothModel * _Nullable)spo2Model callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置运动开关 (139) | activity switch
+ * @param switchModel 运动开关 model (IDOSetActivitySwitchBluetoothModel)
+ * activity switch model (IDOSetActivitySwitchBluetoothModel)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setActivitySwitchCommand:(IDOSetActivitySwitchBluetoothModel * _Nullable)switchModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+* @brief 设置心率开关同步 (139) | v3 heart rate
+* @param v3HrModel 心率开关 model (IDOSetV3HeartRateModeBluetoothModel)
+* v3 heart rate switch model (IDOSetV3HeartRateModeBluetoothModel)
+* @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+* Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+*/
++ (void)setV3HrModelCommand:(IDOSetV3HeartRateModeBluetoothModel * _Nullable)v3HrModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+* @brief 设置喝水提醒  | drink water reminder
+* @param drinkModel 喝水提醒开关 model (IDOSetDrinkReminderModeBluetoothModel)
+* drink water reminder switch model (IDOSetDrinkReminderModeBluetoothModel)
+* @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+* Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+*/
++ (void)setDrinkReminderCommand:(IDOSetDrinkReminderModeBluetoothModel * _Nullable)drinkModel callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置星星数量 数据不作存储 (锐捷) | Set the number of stars (ruijie)
+ * @param startCount 星星数量 (1~5)| number of stars (1~5)
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setStartCountCommand:(NSInteger)startCount callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置蓝牙短信推送 数据不作存储 (锐捷) | Set bluetooth SMS push (ruijie)
+ * @param content 蓝牙短信推送内容 (最长64个字节) | push content （Up to 64 bytes）
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setContentCommand:(NSString * _Nullable)content callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置用户名字 数据不作存储 (锐捷) | Set user name (ruijie)
+ * @param userName 用户名字 (最长10个字节) | user name （Up to 10 bytes）
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setUserNameCommand:(NSString * _Nullable)userName callback:(void (^ _Nullable)(int errorCode))callback;
+
+/**
+ * @brief 设置用户号码 数据不作存储 (锐捷) | Set user number (ruijie)
+ * @param userNumber 用户号码 (最长10个字节) | user number （Up to 10 bytes）
+ * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)setUserNumberCommand:(NSString * _Nullable)userNumber callback:(void (^ _Nullable)(int errorCode))callback;
+
+#pragma mark ======= get Command =======
+
+/**
+ * @brief 获取mac地址 | Get mac address
+ * @param callback 执行后回调 data (IDOGetMacAddrInfoBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback data (IDOGetMacAddrInfoBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)getMacAddrCommand:(void(^_Nullable)(int errorCode,IDOGetMacAddrInfoBluetoothModel * _Nullable data))callback;
+
+/**
+ * @brief  获取设备信息 | Get device information
+ * @param callback 执行后回调 data (IDOGetDeviceInfoBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback data (IDOGetDeviceInfoBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)getDeviceInfoCommand:(void(^_Nullable)(int errorCode,IDOGetDeviceInfoBluetoothModel * _Nullable data))callback;
+
+/**
+ * @brief  获取功能列表 | Get the list of features
+ * @param callback 执行后回调 data (IDOGetDeviceFuncBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback data (IDOGetDeviceFuncBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)getFuncTableCommand:(void(^_Nullable)(int errorCode,IDOGetDeviceFuncBluetoothModel * _Nullable data))callback;
+
+/**
+ * 在非OTA模式下连接成功后，需要准备在同步配置时设置的默认数据，回调后根据类型保存需要设置的数据，在同步配置时分别设置，无需单独执行命令(只有支持相应功能类型才会返回)
+ * After successful connection in non-ota mode, you need to prepare the default data set during synchronization configuration,
+ * save the data set according to the type after callback, and set them separately during synchronization configuration without executing separate commands
+ */
++ (void)syncConfigSetDefaultValuesCallback:(void(^_Nullable)(IDO_SYNC_CONFIG_DATA_TYPE type,BOOL isComplete))callback;
+
+/**
+ * @brief  获得实时数据 | Get real-time data
+ * @param callback 执行后回调 data (IDOGetLiveDataBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback data (IDOGetLiveDataBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)getLiveDataCommand:(void(^_Nullable)(int errorCode,IDOGetLiveDataBluetoothModel * _Nullable data))callback;
+
+/**
+ * @brief 获取设备当前时间 | Get the current time of the device
+ * @param callback 执行后回调 data (IDOGetDeviceTimeBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback data (IDOGetDeviceTimeBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)getDeviceTimeCommand:(void(^_Nullable)(int errorCode,IDOGetDeviceTimeBluetoothModel * _Nullable data))callback;
+
+/**
+ * @brief 获取通知中心的状态 | Get the status of the notification center
+ * @param callback 执行后回调 data (IDOSetNoticeInfoBuletoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback data (IDOSetNoticeInfoBuletoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)getNoticeStatusCommand:(void(^_Nullable)(int errorCode,IDOSetNoticeInfoBuletoothModel * _Nullable data))callback;
+
+/**
+ * @brief 获取心率传感器参数 | Get Heart Rate Sensor Parameters
+ * @param callback 执行后回调 data (IDOGetHrSensorParamBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback data (IDOGetHrSensorParamBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)getHrSensorParamCommand:(void(^_Nullable)(int errorCode,IDOGetHrSensorParamBluetoothModel * _Nullable data))callback;
+
+/**
+ * @brief 获取加速度传感器参数 | Acquire acceleration sensor parameters
+ * @param callback 执行后回调 data (IDOGetGsensorParamBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback data (IDOGetGsensorParamBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)getGsensorParamCommand:(void(^_Nullable)(int errorCode,IDOGetGsensorParamBluetoothModel * _Nullable data))callback;
+
+/**
+ * @brief 获取活动数量 | Get the number of events
+ * @param callback 执行后回调 data (IDOGetActivityCountBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback data (IDOGetActivityCountBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)getActivityCountCommand:(void(^_Nullable)(int errorCode,IDOGetActivityCountBluetoothModel * _Nullable data))callback;
+
+/**
+ * @brief  获取hid信息 | Get hid information
+ * @param callback 执行后回调 data (IDOGetHidInfoBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback data (IDOGetHidInfoBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)getHidInfoCommand:(void(^_Nullable)(int errorCode,IDOGetHidInfoBluetoothModel * _Nullable data))callback;
+
+/**
+ * @brief  获取gps信息 | Get gps information
+ * @param callback 执行后回调 data (IDOGetGpsInfoBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback data (IDOGetGpsInfoBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)getGpsInfoCommand:(void(^_Nullable)(int errorCode,IDOGetGpsInfoBluetoothModel * _Nullable data))callback;
+
+/**
+ * @brief  获取热启动参数 | Get hot start parameters
+ * @param callback 执行后回调 data (IDOGetHotStartParamBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback data (IDOGetHotStartParamBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)getHotStartParamCommand:(void(^_Nullable)(int errorCode,IDOGetHotStartParamBluetoothModel * _Nullable data))callback;
+
+/**
+ * @brief  获取GPS状态 | Get GPS status
+ * @param callback 执行后回调 data (IDOGetGpsStatusBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback data (IDOGetGpsStatusBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)getGpsStatusCommand:(void(^_Nullable)(int errorCode,IDOGetGpsStatusBluetoothModel * _Nullable data))callback;
+
+/**
+ * @brief  获取版本信息 | Get version information
+ * @param callback 执行后回调 data (IDOGetVersionInfoBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback data (IDOGetVersionInfoBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)getVersionInfoCommand:(void(^_Nullable)(int errorCode,IDOGetVersionInfoBluetoothModel * _Nullable data))callback;
+
+/**
+ * @brief  获取realtek平台 ota授权 | Obtain ota authorization of realtek platform
+ * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ * stateCode 0x00:校验成功,0x01:ID号校验失败,0x02:版本号校验失败,0x03:电量不足,0x04:其他错误
+ * stateCode 0x00: verification success,0x01:ID number verification failure,0x02: version number verification failure,0x03: insufficient power,0x04: other errors
+ */
++ (void)getOtaAuthInfoCommand:(void(^_Nullable)(int errorCode,int stateCode))callback;
+
+/**
+ * @brief 获取5个心率区间交换数据 | Exchange data of 5 heart rate intervals were obtained
+ * @param exchangeModel 运动过程中交互数据模型 | Interactive data model during motion
+ * @param callback 执行后回调 data (IDOGetFiveHrReplyInfoBluetoothModel)
+ * (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Post-execution callback data (IDOGetFiveHrReplyInfoBluetoothModel)
+ * (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)getSwithHrInterval:(IDODataExchangeModel * _Nullable)exchangeModel
+                  callback:(void(^_Nullable)(int errorCode,IDOGetFiveHrReplyInfoBluetoothModel * _Nullable data))callback;
+
+
+/**
+* @brief  默认的运动类型 | get default sport type
+* @param callback 执行后回调 data (IDOGetDefaultSportTypeBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+* Post-execution callback data (IDOGetDefaultSportTypeBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+*/
++ (void)getDefaultSportTypeCommand:(void(^_Nullable)(int errorCode,IDOGetDefaultSportTypeBluetoothModel * _Nullable data))callback;
+
+/**
+ * @brief  获取星星的数量,数据不作存储（锐捷） | Get number of stars （ruijie）
+ * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)getStartCountCommand:(void (^ _Nullable)(int errorCode,NSInteger startCount))callback;
+
+#pragma mark ======= listen Command =======
+
+/**
+ * @brief 音乐开始 | Music begins
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenMusicStartCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 音乐暂停 | Music pause
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenMusicPauseCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 音乐结束 | End of music
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenMusicStopCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 音乐上一首 | Music on the first
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenMusicLastCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 音乐下一首 | Music next
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenMusicNextCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 单次拍照 | Single photo
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenPhotoSingleShotCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 连续拍照 | Taking photos continuously
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenPhotoBurstCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 拍照开始 | Take a photo
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenPhotoStartCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 拍照结束 | End of photo
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenPhotoEndCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 音量+ | Volume +
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenVolumeUpCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 音量- | Volume -
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenVolumeDownCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 寻找手机开始 | Looking for a mobile phone to start
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenFindPhoneStartCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 寻找手机结束 | Looking for the end of the phone
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenFindPhoneStopCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 防丢启动 | Anti-lost start
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenLostStartCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 防丢结束 | Anti-lost end
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenLostStopCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 一键求救 | One button for help
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenSosStartCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 闹钟同步完成 | Alarm clock synchronization completed
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenAlarmSyncCompleteCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 配置同步完成 | Configure synchronization completion
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenConfigSyncCompleteCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 健康同步完成 | Health sync completed
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenHealthSyncCompleteCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 数据传输完成 | Data transfer completed
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenDataTranCompleteCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 配置快速同步完成 | Configuring Fast Sync Complete
+ *  @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenConfigFastSyncCompleteCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief GPS数据同步完成 | GPS data synchronization completed
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenGpsSyncCompleteCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 活动数据同步完成 | Activity data synchronization completed
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenActivitySyncCompleteCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 手环检查版本号 | Bracelet checks the version number
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)listenCheckUpdateReplyCommand:(void(^_Nullable)(int errorCode))callback;
+
+/**
+ * @brief 手环发送iot按钮 | Bracelet send iot buttons
+ * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str,index 对应按钮索引)
+ * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+*/
++ (void)listenIotButtonCommand:(void(^_Nullable)(int errorCode,int index))callback;
+
+#pragma mark ======= progress Command =======
+
+/**
+ * @brief 健康数据同步进度 | Health data synchronization progress
+ * @param callback 健康数据同步进度回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Health data synchronization progress callback (errorCode : 0 transmission success, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)healthSyncProgressCommand:(void(^_Nullable)(int progress,int errorCode))callback;
+
+/**
+ * @brief 闹钟数据同步进度 | Alarm data synchronization progress
+ * @param callback 闹钟数据同步进度回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Alarm data synchronization progress callback (errorCode : 0 transmission success, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)alarmSyncProgressCommand:(void(^_Nullable)(int progress,int errorCode))callback;
+
+/**
+ * @brief 活动数据同步进度 | Activity data synchronization progress
+ * @param callback 活动数据同步进度回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Activity data synchronization progress callback (errorCode : 0 transmission success, other values are errors, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)activitySyncProgressCommand:(void(^_Nullable)(int progress,int errorCode))callback;
+
+/**
+ * @brief 数据交换进度 手环->app | Data Exchange Progress Bracelet -> app
+ * @param callback 数据交换进度回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Data exchange progress callback (errorCode: 0 transmission succeeded, other values are errors, error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)dataTranProgressCommand:(void(^_Nullable)(int progress,int errorCode))callback;
+
+/**
+ * @brief gps数据同步进度 | gps data synchronization progress
+ * @param callback  gps数据同步进度回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * gps data synchronization progress callback (errorCode: 0 transmission success, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)gpsProgressCommand:(void(^_Nullable)(int progress,int errorCode))callback;
+
+/**
+ * @brief 数据交换进度 app->手环 | Data Exchange Progress app->Bracelet
+ * @param callback  数据交换进度回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Data exchange progress callback (errorCode: 0 transmission succeeded, other values are errors, error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)appDataTranProgressCommand:(void(^_Nullable)(int progress,int errorCode))callback;
+
+/**
+ * @brief  配置同步进度 | Configure synchronization progress
+ * @param callback 配置同步进度回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Configure synchronization progress callback (errorCode : 0 transmission succeeded, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)configSyncProgressCommand:(void(^_Nullable)(int progress,int errorCode))callback;
+
+#pragma mark ======= data exchange Command =======
+
+/**
+ * @brief app 发起运动开始 | app starts the campaign
+ * @param model IDODataExchangeModel (数据交换model, day|hour|minute|second|sportType|targetType|targetValue|forceStart 这些属性需要赋值)
+ * IDODataExchangeModel (data exchange model, day|hour|minute|second|sportType|targetType|targetValue|forceStart These attributes need to be assigned)
+ * @param startCallback 运动发起回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Motion initiated callback (errorCode : 0 transmission succeeded, other values are errors, error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)appStartSportCommand:(IDODataExchangeModel * _Nullable)model
+               startCallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))startCallback;
+
+/**
+ * @brief app 发起运动结束 | app initiates the end of the campaign
+ * @param model IDODataExchangeModel 活动时间需要保持一致,才能停止活动不然无效,当前model对象为全局时,只要开始活动记录开始时间,
+ * 结束时不需要再次给时间赋值,只需要给 durations|calories|distance|sportType|isSave 这些属性需要赋值
+ * IDODataExchangeModel activity time needs to be consistent in order to stop the activity or it will be invalid. When the current model object is global,
+ * just start the activity record start time. You don't need to assign values to the time at the end, just give durations|calories|distance|sportType|isSave
+ * these properties need to be assigned.
+ * @param appEndCallback 运动停止回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Motion stop callback (errorCode : 0 transfer succeeded, other values are wrong, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)appEndSportCommand:(IDODataExchangeModel *_Nullable)model
+            appEndcallback:(void (^_Nullable)(IDODataExchangeModel *  _Nullable model,int errorCode))appEndCallback;
+
+/**
+ * @brief app发起的运动 手环主动结束 | App-initiated sports bracelet ends actively
+ * @param model IDODataExchangeModel 手环主动发起结束 APP需要给手环发送运动数据, durations|calories|distance|errorCode 这些属性需要赋值
+ * IDODataExchangeModel The bracelet is actively launched. The APP needs to send motion data to the bracelet. durations|calories|distance|errorCode
+ * These attributes need to be assigned.
+ * @param appBleEndCallback 手环发起停止回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * The bracelet initiates a stop callback (errorCode: 0 is successfully transmitted, other values are incorrect, and error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)appBleEndReplyCommand:(IDODataExchangeModel *_Nullable)model
+            appBleEndCallback:(void (^_Nullable)(IDODataExchangeModel *  _Nullable model,int errorCode))appBleEndCallback;
+
+
+/**
+ * @brief app发起运动暂停 | app initiates a motion pause
+ * @param model IDODataExchangeModel 活动时间需要保持一致,才能暂停活动不然无效,当前model对象为全局时,只要开始活动记录开始时间,暂停时不需要再次给时间赋值,直接传入当前model
+ * IDODataExchangeModel activity time needs to be consistent in order to pause activity or not, when the current model object is global,  As soon as you start the activity
+ * record start time, you don't need to assign time to the timeout when you pause, you can directly pass in the current model.
+ * @param pauseCallback 运动暂停回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Motion pause callback (errorCode : 0 transmission success, other values are errors, you can get error code str according to IDOErrorCodeToStr)
+ */
++ (void)appPauseSportCommand:(IDODataExchangeModel *_Nullable)model
+               pauseCallback:(void (^_Nullable)(IDODataExchangeModel *  _Nullable model,int errorCode))pauseCallback;
+
+
+
+/**
+ * @brief app发起的运动 手环主动暂停 | App-initiated sports bracelet active suspension
+ * @param model IDODataExchangeModel 手环主动发起暂停 APP需要给手环发送运动数据, errorCode 这个属性需要赋值
+ * IDODataExchangeModel The bracelet initiates a pause. The APP needs to send motion data to the bracelet. The errorCode attribute needs to be assigned.
+ * @param appBlePauseCallback 手环发起暂停回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * The bracelet initiates a pause callback (errorCode: 0 is successfully transmitted, other values are errors, and error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)appBlePauseReplyCommand:(IDODataExchangeModel *_Nullable)model
+            appBlePauseCallback:(void (^_Nullable)(IDODataExchangeModel *  _Nullable model,int errorCode))appBlePauseCallback;
+
+
+/**
+ * @brief app 发起运动恢复 | app initiates motion recovery
+ * @param model IDODataExchangeModel 活动时间需要保持一致,才能恢复活动不然无效,当前model对象为全局时,只要开始活动记录开始时间,恢复时不需要再次给时间赋值,直接传入当前model
+ * IDODataExchangeModel activity time needs to be consistent in order to restore activity or not, when the current model object is global,As soon as you start the activity
+ * record start time, you don't need to assign time to the time when restoring, you can directly pass in the current model.
+ * @param appRestoreCallback 运动恢复回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Motion recovery callback (errorCode : 0 transmission succeeded, other values are wrong, error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)appRestoreSportCommand:(IDODataExchangeModel * _Nullable)model
+            appRestoreCallback:(void (^_Nullable)(IDODataExchangeModel *  _Nullable model,int errorCode))appRestoreCallback;
+
+/**
+ * @brief app发起的运动 手环主动恢复 | app-initiated sports bracelet active recovery
+ * @param model IDODataExchangeModel 手环主动发起恢复 APP需要给手环发送运动数据, errorCode 这个属性需要赋值
+ * IDODataExchangeModel The bracelet initiates recovery. The APP needs to send motion data to the bracelet. The errorCode attribute needs to be assigned.
+ * @param appBleRestoreCallback 手环发起恢复回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * The bracelet initiates a recovery callback (errorCode : 0 is successfully transmitted, other values are incorrect, and error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)appBleRestoreReplyCommand:(IDODataExchangeModel *_Nullable)model
+            appBleRestoreCallback:(void (^_Nullable)(IDODataExchangeModel *  _Nullable model,int errorCode))appBleRestoreCallback;
+
+/**
+ * @brief app发起数据交换过程 | app initiates the data exchange process
+ * @param model IDODataExchangeModel 活动时间需要保持一致,才能发送活动数据不然无效,当前model对象为全局时,只要开始活动记录开始时间,发送活动数据时不需要再次给时间赋值,
+ * 只需要给 status|duration|calories|distance 这些属性需要赋值
+ * IDODataExchangeModel Activity time needs to be consistent in order to send active data or it is invalid. When the current model object is global, as long as the activity
+ * record start time is started, it is not necessary to assign time to the event when sending the activity data, just to status|duration|calories|distance
+ * These attributes need to be assigned.
+ * @param appIngCallback 运动发送数据回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * Motion sends data callback (errorCode : 0 transmission succeeded, other values are errors, error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)appIngSportCommand:(IDODataExchangeModel *_Nullable)model
+            appIngCallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))appIngCallback;
+
+/**
+ * @brief 手环发起运动开始 | The bracelet starts the campaign
+ * @param model IDODataExchangeModel 只需要给 retCode 这个属性需要赋值
+ * IDODataExchangeModel only needs to assign value to retCode property
+ * @param bleStartCallback 手环发起运动开始回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * The bracelet initiates a motion start callback (errorCode : 0 is successfully transmitted, other values are wrong, and error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)bleStartSportCommand:(IDODataExchangeModel *_Nullable)model
+            bleStartCallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))bleStartCallback;
+
+/**
+ * @brief 手环发起运动暂停 | The bracelet initiates a motion pause
+ * @param model IDODataExchangeModel 只需要给 retCode 这个属性需要赋值
+ * IDODataExchangeModel only needs to assign value to retCode property
+ * @param blePauseCallback 手环发起运动暂停回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * The bracelet initiates a motion pause callback (errorCode : 0 is successfully transmitted, other values are incorrect, and error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)blePauseSportCommand:(IDODataExchangeModel *_Nullable)model
+            blePauseCallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))blePauseCallback;
+
+/**
+ * @brief 手环发起运动恢复 | Bracelet initiates sports recovery
+ * @param model IDODataExchangeModel 只需要给 retCode 这个属性需要赋值
+ * IDODataExchangeModel only needs to assign value to retCode property
+ * @param bleRestoreCallback 手环发起运动恢复回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * The bracelet initiates a motion recovery callback (errorCode : 0 is successfully transmitted, other values are wrong, and error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)bleRestoreSportCommand:(IDODataExchangeModel *_Nullable)model
+            bleRestoreCallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))bleRestoreCallback;
+
+/**
+ * @brief 手环发起运动结束 | The bracelet starts the campaign
+ * @param model IDODataExchangeModel 只需要给 retCode 这个属性需要赋值
+ * IDODataExchangeModel only needs to assign value to retCode property
+ * @param bleEndCallback 手环发起运动结束回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ * The bracelet initiates a motion end callback (errorCode : 0 is successfully transmitted, other values are errors, and error code str can be obtained according to IDOErrorCodeToStr)
+ */
++ (void)bleEndSportCommand:(IDODataExchangeModel *_Nullable)model
+            bleEndCallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))bleEndCallback;
+
+/**
+ * @brief 手环发起运动发送数据 | The bracelet initiates a motion to send data
+ * @param model IDODataExchangeModel 只需要给 distance 这个属性需要赋值
+ * @param bleIngCallback 手环发起运动发送数据 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str)
+ */
++ (void)bleIngSportCommand:(IDODataExchangeModel *_Nullable)model
+            bleIngCallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))bleIngCallback;
+
+@end