capacitor-plugin-ihealth 1.1.0

package/ios/Plugin/iHealthSDKHeaders/DFUMacro.h

@@ -0,0 +1,264 @@
+//
+//  DFUMacro.h
+//  iHealthSDKStatic
+//
+//  Created by Lei Bao on 2017/7/18.
+//  Copyright © 2017年 daiqingquan. All rights reserved.
+//
+
+#ifndef DFUMacro_h
+#define DFUMacro_h
+
+@class DFUDeviceFirmwareInfo;
+@class DFUServerFirmwareInfo;
+
+/**
+ DFU error code
+ */
+typedef NS_ENUM(NSInteger, DFUError) {
+    /// Device type does not support.
+    DFUError_UnsupportedDeviceType = 100,
+    /// UUID is invalid.
+    DFUError_InvalidUUID = 101,
+    /// Command timeout.
+    DFUError_CommandTimeOut = 102,
+    /// Device is not connected.
+    DFUError_NoConnectedDevice = 104,
+    /// During DFU, other commands cannot be executed.
+    DFUError_InUpgradeCannotExecuteCommand = 105,
+    /// Firmware version is invalid.
+    DFUError_InvalidFirmwareVersion = 106,
+    /// Hardware version is invalid.
+    DFUError_InvalidHardwareVersion = 107,
+    /// The firmware info file is wrong.
+    DFUError_InvalidFirmwareInfoFile = 108,
+    /// The firmware file is wrong.
+    DFUError_InvalidFirmwareFile = 109,
+    /// It indicates network error.
+    DFUError_NetworkError = 200,
+    /// Server error
+    DFUError_ServerError = 202,
+    /// Requested file does not exist.
+    DFUError_RequestedFileNotExist = 203,
+    /// File save error
+    DFUError_FileSaveError = 204,
+    /// Info file does not pass check.
+    DFUError_InfoFileCheckNotPass = 205,
+    /// Firmware file does not pass check.
+    DFUError_firmwareFileCheckNotPass = 206,
+    /// Device disconnects before command finish.
+    DFUError_DeviceDisconnect = 300,
+    /// Device stops update.
+    DFUError_DeviceStopUpdate = 301,
+    /// The firmware file does not exist.
+    DFUError_NoFirmwareFile = 402,
+    /// Delete error
+    DFUError_DeleteError = 407,
+    /// Delete file , but file does not exist
+    DFUError_DeleteWhileFileNotExist = 408,
+    /// Device flash error (only support in ECG3 DFU)
+    DFUError_DeviceFlashError = 408,
+    
+};
+
+/**
+ DFU device type
+ */
+typedef NS_ENUM(NSInteger, DFUDeviceType) {
+    /// Unknown
+    DFUDeviceType_Unknown = -1,
+    /// AM3
+    DFUDeviceType_AM3,
+    /// AM3S
+    DFUDeviceType_AM3S,
+    /// AM4
+    DFUDeviceType_AM4,
+    /// PO3
+    DFUDeviceType_PO3,
+    /// HS2
+    DFUDeviceType_HS2,
+    /// HS4
+    DFUDeviceType_HS4,
+    /// ECG
+    DFUDeviceType_ECG,
+    /// BP5S
+    DFUDeviceType_BP5S,
+    /// ABPM
+    DFUDeviceType_ABPM,
+    /// BG5S
+    DFUDeviceType_BG5S,
+    /// HS2S
+    DFUDeviceType_HS2S,
+    /// placeholder
+    DFUDeviceType_MAX,
+};
+
+/**
+ Cannot upgrade reason
+ */
+typedef NS_ENUM(NSInteger, DFUDeviceReplyCannotUpgradeReason){
+    /// Unknown
+    DFUDeviceReplyCannotUpgradeReason_Unknown = 1,
+    /// battery is low
+    DFUDeviceReplyCannotUpgradeReason_Battery,
+    /// cannot upgrade when measuring
+    DFUDeviceReplyCannotUpgradeReason_InMeasuring,
+};
+
+/**
+ Upgrade fail reason
+ */
+typedef NS_ENUM(NSInteger, DFUUpgradeFailReason) {
+    /// Unknown
+    DFUUpgradeFailReason_Unknown = -1,
+    /// Device recieve wrong data or no data
+    DFUUpgradeFailReason_DeviceRecieveWrongDataOrNotRecieve,
+    /// Write MCU error
+    DFUUpgradeFailReason_WriteMCUError,
+    /// Device stop upgrade
+    DFUUpgradeFailReason_DeviceStopUpgrade,
+    /// Delete firmware error (only support in ECG3 DFU)
+    DFUUpgradeFailReason_DeleteFirmwareError,
+    /// Device flash error (only support in ECG3 DFU)
+    DFUUpgradeFailReason_DeviceFlashError,
+};
+
+/**
+ Transmission result type
+ */
+typedef NS_ENUM(NSInteger, DFUTransmissionResultType) {
+    /// Unknown
+    DFUTransmissionResultType_Unknown = -1,
+    /// All firmware transfer finish
+    DFUTransmissionResultType_Finish,
+    /// Pasuse because device needs write MCU
+    DFUTransmissionResultType_Pause,
+};
+
+/**
+ Pause reason
+ */
+typedef NS_ENUM(NSInteger, DFUPauseReason) {
+    /// Unkonw reason
+    DFUPauseReason_Unknown = 0,
+    /// Need write MCU, if finished, device can be connected.
+    DFUPauseReason_RebootAndNeedReconnect,
+};
+
+
+/**
+ DFU state
+ */
+typedef NS_ENUM(NSInteger, DFUState) {
+    /// Unknown
+    DFUState_Unknown = -1,
+    /// Busy
+    DFUState_Busy,
+    /// Free
+    DFUState_Free,
+};
+
+
+/**
+ DFU error block
+
+ @param error DFUError enum
+ */
+typedef void (^DFUErrorBlock)(DFUError error);
+
+/**
+ Device firmware information block
+
+ @param deviceFirmwareInfo DFUDeviceFirmwareInfo object
+ */
+typedef void (^QueryDeviceFirmwareInfoSuccessBlock)(DFUDeviceFirmwareInfo *deviceFirmwareInfo);
+
+/**
+ Server firmware information block
+
+ @param serverFirmwareInfo DFUServerFirmwareInfo object
+ */
+typedef void (^QueryServerFirmwareInfoSuccessBlock)(DFUServerFirmwareInfo *serverFirmwareInfo);
+
+/**
+ Download firmware file success block
+
+ @param firmwareIdentifier firmware ID
+ */
+typedef void (^DownloadFirmwareSuccessBlock)(NSString *firmwareIdentifier);
+
+/**
+ Download firmware file start block
+ */
+typedef void (^DownloadFirmwareStartBlock)(void);
+
+/**
+ Download firmware file progress block
+
+ @param progress 0-100
+ */
+typedef void (^DownloadFirmwareProgressBlock)(NSInteger progress);
+
+/**
+ CancelDownloadFirmwareSuccessBlock
+ */
+typedef void (^CancelDownloadFirmwareSuccessBlock)(void);
+
+/**
+ DeviceReplyCannotUpgradeBlock
+
+ @param reason DFUDeviceReplyCannotUpgradeReason enum
+ */
+typedef void(^DeviceReplyCannotUpgradeBlock)(DFUDeviceReplyCannotUpgradeReason reason);
+
+/**
+ TransferBeginBlock
+ */
+typedef void(^TransferBeginBlock)(void);
+
+/**
+ TransferProgressBlock
+
+ @param progress 0-100
+ */
+typedef void(^TransferProgressBlock)(NSInteger progress);
+
+/**
+ TransferSuccessBlock
+
+ @param writeMCUSpeed unit:bytes/second
+ */
+typedef void(^TransferSuccessBlock)(NSUInteger writeMCUSpeed);
+
+/**
+ TransferResultBlock
+
+ @param type DFUTransmissionResultType enum
+ @param reason DFUPauseReason enum, -1 if type is DFUTransmissionResultType_Finish;
+ @param pauseLength 0-255s,-1 if type is DFUTransmissionResultType_Finish;
+ */
+typedef void(^TransferResultBlock)(DFUTransmissionResultType type,DFUPauseReason reason,NSInteger pauseLength);
+
+/**
+ UpgradeSuccessBlock
+ */
+typedef void(^UpgradeSuccessBlock)(void);
+
+/**
+ UpgradeFailBlock
+
+ @param reason DFUUpgradeFailReason enum
+ */
+typedef void(^UpgradeFailBlock)(DFUUpgradeFailReason reason);
+
+/**
+ StopUpgradeSuccessBlock
+ */
+typedef void(^StopUpgradeSuccessBlock)(void);
+
+/**
+ DeleteFirmwareSuccessBlock
+ */
+typedef void(^DeleteFirmwareSuccessBlock)(void);
+
+#endif /* DFUMacro_h */

package/ios/Plugin/iHealthSDKHeaders/DFUServerFirmwareInfo.h

@@ -0,0 +1,48 @@
+//
+//  DFUServerFirmwareInfo.h
+//  iHealthSDKStatic
+//
+//  Created by Lei Bao on 2017/7/17.
+//  Copyright © 2017年 daiqingquan. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+#import "DFUMacro.h"
+
+/**
+ Firmware information from server
+ */
+@interface DFUServerFirmwareInfo : NSObject
+
+/**
+ DFUDeviceType
+ */
+@property (assign, nonatomic, readonly) DFUDeviceType deviceType;
+
+/**
+ The latest firmware version (0.0.0 or 0.0.0.0 means no firmware in server, you should check your query input parameters)
+ */
+@property (copy, nonatomic, readonly) NSString *latestFirmwareVersion;
+
+/**
+ YES means mandtory
+ */
+@property (assign, nonatomic, readonly) BOOL isMandtoryUpgrade;
+
+/**
+ Description
+ */
+@property (copy, nonatomic, readonly) NSString *updateDescription;
+
+/**
+ Images before updating
+ */
+@property (copy, nonatomic, readonly) NSArray *beforeImages;
+
+/**
+ Image after updating
+ */
+@property (copy, nonatomic, readonly) NSArray *afterImages;
+
++ (instancetype)infoWithDeviceType:(DFUDeviceType)deviceType dic:(NSDictionary *)dic;
+@end

package/ios/Plugin/iHealthSDKHeaders/ECG3.h

@@ -0,0 +1,94 @@
+//
+//  ECG3.h
+//  iHealthDemoCode
+//
+//  Created by zhiwei jing on 16/7/12.
+//  Copyright © 2016年 zhiwei jing. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+#import "ECGMacroFile.h"
+
+/**
+ Sync Time Successfully
+ */
+typedef void (^DisposeECG3SyncTimeSuccessBlock)(void);
+
+/**
+ Error block
+
+ @param errorId see ECG3ErrorID enum
+ */
+typedef void(^DisposeECG3ErrorBlock)(ECG3ErrorID errorId);
+/**
+ Start Measure
+ */
+typedef void (^DisposeECG3StartMeasureBlock)(void);
+/**
+ Finish Measure
+ */
+typedef void (^DisposeECG3FinishMeasureSuccessBlock)(void);
+
+ /**
+ ECG3 Wave Data
+ */
+typedef void (^DisposeECG3WaveDataBlock)(NSArray* waveDataArray);
+
+/**
+ ECG3 HR Data
+ */
+typedef void (^DisposeECG3PluseResultBlock)(BOOL hasHR,NSUInteger HR);
+/**
+ get Battery
+ */
+typedef void (^DisposeECG3GetBatteryBlock)(NSNumber *battery);
+/**
+ ECG3
+ */
+@interface ECG3 : NSObject
+
+@property (strong, nonatomic) NSString *currentUUID;
+@property (strong, nonatomic) NSString *serialNumber;
+@property (strong, nonatomic) NSString *firmwareVersion;
+
+/**
+ * Sync time
+ * @param syncTimeBlock Sync time successfully
+ * @param errorBlock Communication error codes, see ECG3 error descriptions.
+ */
+-(void)commandECG3SyncTime:(DisposeECG3SyncTimeSuccessBlock)syncTimeBlock withErrorBlock:(DisposeECG3ErrorBlock)errorBlock;
+
+
+/**
+ * Start Measure
+ * @param startMeasureBlock True: Success， False: Failed.
+ * @param waveDataBlock waveData：ECGWaveData use for draw wave
+ * @param pluseResultBlock hasHR: whether have heart; HR: heart rate (unit: bpm) only valid when isHaveHeart is true
+ * @param errorBlock Communication error codes, see ECG3 error descriptions.
+ */
+-(void)commandECG3StartMeasure:(DisposeECG3StartMeasureBlock)startMeasureBlock withWaveData:(DisposeECG3WaveDataBlock)waveDataBlock withPulseResult:(DisposeECG3PluseResultBlock)pluseResultBlock withErrorBlock:(DisposeECG3ErrorBlock)errorBlock;
+
+
+
+/**
+ * Finish Measure
+ * @param finishMeasureBlock finish successfully
+ * @param errorBlock Communication error codes, see ECG3 error descriptions.
+ */
+-(void)commandECG3FinishMeasure:(DisposeECG3FinishMeasureSuccessBlock)finishMeasureBlock withErrorBlock:(DisposeECG3ErrorBlock)errorBlock;
+
+
+
+
+/**
+ * Get Battery
+ * @param batteryBlock from 0～100.
+ * @param errorBlock Communication error codes, see ECG3 error descriptions.
+ */
+-(void)commandECG3GetBatteryInfo:(DisposeECG3GetBatteryBlock)batteryBlock withErrorBlock:(DisposeECG3ErrorBlock)errorBlock;
+
+/**
+ Disconnect device
+ */
+- (void)disconnectDevice;
+@end

package/ios/Plugin/iHealthSDKHeaders/ECG3Controller.h

@@ -0,0 +1,30 @@
+//
+//  ECG3Controller.h
+//  CES2014ECG
+//
+//  Created by 小翼 on 15/8/27.
+//  Copyright (c) 2015年 leed. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+
+/**
+ ECG3Controller
+ */
+@interface ECG3Controller : NSObject
+
+
+
+/**
+ * Initialize ECG3 controller class
+ */
++(ECG3Controller *)shareECG3Controller;
+
+/**
+ * Access control class instance after receiving ECG3ConnectNoti, then use instance to call ECG3 related communication methods
+ */
+-(NSArray *)getAllCurrentECG3Instace;
+
+
+
+@end

package/ios/Plugin/iHealthSDKHeaders/ECG3USB.h

@@ -0,0 +1,145 @@
+//
+//  ECG3.h
+//  iHealthDemoCode
+//
+//  Created by daiqingquan on 15/9/15.
+//  Copyright (c) 2015年 zhiwei jing. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+#import "ECGMacroFile.h"
+
+/**
+ Sync Start
+ */
+typedef void (^ECG3USBSyncStartBlock)(void);
+
+/**
+ Sync Progress
+
+ @param progress 0-100
+ */
+typedef void (^ECG3USBSyncProgressBlock)(NSUInteger progress);
+
+/**
+ @brief Sync Result
+
+ @param resultArray An array contains Dictionary
+ @code Dictionary format: {
+ @"SampleRate":@(sampleRate),
+ @"StartTime":startTimeString,
+ @"EndTime":endTimeString,
+ @"FileName":fileName,
+ @"FilePath":path
+ });
+ @endcode
+ @param finish YES means all data has been uploaded, NO means not all data has been uploaded because of some reasons sucn as device disconnect\communication error\iOS device's memory issue\raw data error. The reason you can get from ECG3USBErrorBlock.
+ */
+typedef void (^ECG3USBSyncResultBlock)(NSArray *resultArray,BOOL finish);
+
+/**
+ Sync Error
+
+ @param errorID error ID
+ */
+typedef void (^ECG3USBErrorBlock)(ECG3USBError errorID);
+
+
+/**
+ Format SD Card Success
+ */
+typedef void (^ECG3FormatSDCardSuccessBlock)(void);
+
+/**
+ Format SD Card Fail
+ */
+typedef void (^ECG3FormatSDCardFailBlock)(ECG3USBError error);
+/**
+ Format Progress
+ 
+ @param progress 0-100
+ */
+typedef void (^ECG3USBFormatProgressBlock)(NSUInteger progress);
+/**
+ ECG3USB
+ */
+@interface ECG3USB : NSObject
+@property (strong, nonatomic) NSString *currentUUID;
+@property (strong, nonatomic) NSString *serialNumber;
+@property (strong, nonatomic) NSString *firmwareVersion;
+
+/**
+ Sync Data
+
+ @param startBlock means start
+ @param progressBlock 0-100
+ @param resultBlock You can get filtered data from the NSDocumentDirectory path.
+ 
+ Abnormal Point Marked by User: OBData_FileName.xml
+ Filtered ECG Data: ECGAnalyseResult_FileName.dat
+ Lead Off Begin Point: ECGLeadOffBegin_FileName.xml
+ Lead Off End Point: ECGLeadOffEnd_FileName.xml
+ ECG HR Information EveryHour: ECGHREveryHour_FileName.xml
+ Abnormal Point Filtered by Algorithm: ECGOBbyFilter_FileName.xml
+ ECG HR Information for Day: ECGDetail_FileName.xml
+ @param errorBlock error
+ 
+ */
+- (void)syncDataWithStartBlock:(ECG3USBSyncStartBlock)startBlock
+                 progressBlock:(ECG3USBSyncProgressBlock)progressBlock
+                   resultBlock:(ECG3USBSyncResultBlock)resultBlock
+                    errorBlock:(ECG3USBErrorBlock)errorBlock;
+
+/**
+ Format SD Card
+
+ @param successBlock Success
+ @param progressBlock 0-100
+ @param failBlock Fail
+ */
+-(void)formatSDCard:(ECG3FormatSDCardSuccessBlock)successBlock
+      progressBlock:(ECG3USBFormatProgressBlock)progressBlock
+         errorBlock:(ECG3FormatSDCardFailBlock)failBlock;
+
+/**
+ Splice data
+ 
+ @param fileNames An Array with FileName value from ECG3USBSyncResultBlock
+ @param successBlock a block contains a dictionary with keys: success(@{@"DataFileName":dataFileName,@"MarkFileName":markFileName,@"StartTime":yyyyMMddHHmmss,@"EndTime":yyyyMMddHHmmss,@"FilePath":directory});
+ @param errorBlock a block contains error message
+ */
++ (void)spliceWithFileNames:(NSArray<NSString *>*)fileNames
+               successBlock:(void(^)(NSDictionary *dic))successBlock
+                 errorBlock:(void(^)(ECG3USBError error,NSString *message))errorBlock;
+
+
+/**
+ Get data cache
+
+ @param block An array contains Dictionary object
+ {
+ @"SampleRate":@(sampleRate),
+ @"StartTime":startTimeString,
+ @"EndTime":endTimeString,
+ @"FileName":fileName,
+ @"FilePath":path
+ });
+ */
+- (void)getCacheDataWithBlock:(void(^)(NSArray *array))block;
+
+/**
+ 
+
+ @param dic the dictionary from the success block of method ’synthesisWithFileNames:success:error:‘
+ */
+
+/**
+ Filter
+
+ @param dic the dictionary from the success block of method ’synthesisWithFileNames:success:error:‘
+ @param success see ECG3USBSyncResultBlock comments
+ @param error a block contains error message (If the files don't exist, no error block retrun but print error message in the console)
+ */
+- (void)getFilterDataWithDic:(NSDictionary *)dic success:(ECG3USBSyncResultBlock)success error:(void(^)(NSString *message))error;
+
+@end

package/ios/Plugin/iHealthSDKHeaders/ECG3USBController.h

@@ -0,0 +1,31 @@
+//
+//  ECG3Controller.h
+//  iHealthDemoCode
+//
+//  Created by daiqingquan on 15/9/15.
+//  Copyright (c) 2015年 zhiwei jing. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+
+@class ECG3USB;
+
+/**
+ ECG3USBController
+ */
+@interface ECG3USBController : NSObject
+
+/**
+ share ECG3 Controller
+
+ @return ECG3USBController
+ */
++(ECG3USBController *)shareECG3USBController;
+
+/**
+ get ECG3
+
+ @return ECG3USB
+ */
+-(ECG3USB *)getCurrentECG3USBInstace;
+@end

package/ios/Plugin/iHealthSDKHeaders/ECGHeader.h

@@ -0,0 +1,20 @@
+//
+//  ECGHeader.h
+//  iHealthDemoCode
+//
+//  Created by zhiwei jing on 16/7/12.
+//  Copyright © 2016年 zhiwei jing. All rights reserved.
+//
+
+#ifndef ECGHeader_h
+#define ECGHeader_h
+
+
+#import "ECG3.h"
+#import "ECG3Controller.h"
+#import "ECGMacroFile.h"
+#import "HealthUser.h"
+#import "ECG3USB.h"
+#import "ECG3USBController.h"
+
+#endif /* ECGHeader_h */