brepjs 20.13.6 → 20.14.0

package/dist/{occtWasmAdapter-CGkZIHyM.js → occtWasmAdapter-DD_6IAVj.js}

@@ -2313,6 +2313,13 @@ function resolveEdgeValues(edges, value) {
 		second
 	};
 }
+/**
+* occt-wasm's fillet entry points take only positive radii, though its
+* single-edge filletVariable builds a fillet that runs out to a radius of 0.
+*/
+function refuseVanishingFilletRadius({ first, second }) {
+	if (first.includes(0) || second.includes(0)) throw new UnsupportedKernelOperationError("occt-wasm: a fillet radius that runs to 0 is built only by variableFillet");
+}
 /** The value every edge takes on both sides, or `undefined` when they differ. */
 function uniformEdgeValue({ first, second }) {
 	const [value] = first;
@@ -2323,10 +2330,11 @@ function uniformEdgeValue({ first, second }) {
 * Run a fillet or chamfer over `edges`, naming the edges it fails on. Edges
 * that all take one value go to `uniform`, the single-value entry point every
 * occt-wasm build has; otherwise `perEdge` gets each edge's pair as `first`
-* and `second`.
+* and `second`. `check` sees the resolved values first and throws to refuse them.
 */
-function runEdgeTreatment(Module, edges, value, uniform, perEdge) {
+function runEdgeTreatment(Module, edges, value, uniform, perEdge, check) {
 	const values = resolveEdgeValues(edges, value);
+	check?.(values);
 	const shared = uniformEdgeValue(values);
 	const edgeVec = makeVecU32(Module, edges.map(unwrap));
 	try {
@@ -3813,7 +3821,7 @@ function fillet(k, Module, shape, edges, radius) {
 	return wrapResult(k, runEdgeTreatment(Module, edges, radius, (edgeVec, r) => k.fillet(id, edgeVec, r), (edgeVec, startRadii, endRadii) => {
 		if (!k.filletRadii) throw needsOcctWasm59("per-edge or tapered fillet radii");
 		return k.filletRadii(id, edgeVec, startRadii, endRadii);
-	}));
+	}, refuseVanishingFilletRadius));
 }
 function chamfer(k, Module, shape, edges, distance) {
 	const id = unwrap(shape);
@@ -6259,7 +6267,7 @@ function filletWithHistory(k, Module, shape, edges, radius, inputFaceHashes, has
 		const { id, evolution } = parseEvolution(runEdgeTreatment(Module, edges, radius, (edgeVec, r) => k.filletWithHistory(shapeId, edgeVec, r, hashVec, hashUpperBound), (edgeVec, startRadii, endRadii) => {
 			if (!k.filletRadiiWithHistory) throw needsOcctWasm59("per-edge or tapered fillet radii");
 			return k.filletRadiiWithHistory(shapeId, edgeVec, startRadii, endRadii, hashVec, hashUpperBound);
-		}));
+		}, refuseVanishingFilletRadius));
 		return {
 			shape: wrapResult(k, id),
 			evolution

package/dist/operations.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_threadFns = require("./threadFns-BnNo5eND.cjs");
-const require_loftFns = require("./loftFns-BD0na-M4.cjs");
+const require_threadFns = require("./threadFns-zNevH3kU.cjs");
+const require_loftFns = require("./loftFns-DQJM-35I.cjs");
 exports.addChild = require_threadFns.addChild;
 exports.addJoint = require_threadFns.addJoint;
 exports.addStep = require_threadFns.addStep;

package/dist/operations.js

@@ -1,3 +1,3 @@
-import { A as setJointValue, B as walkAssembly, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as countNodes, H as circularPattern, I as createAssemblyNode, L as findNode, M as sphericalJoint, N as addChild, O as prismaticJoint, P as collectShapes, R as removeChild, S as addJoint, T as jointTransform, U as gridPattern, V as exportAssemblySTEP, W as linearPattern, Y as createAssembly, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as updateNode } from "./threadFns-Dfu2jV41.js";
-import { c as twistExtrude, o as supportExtrude, r as complexExtrude, s as sweep } from "./loftFns-Cua-MamP.js";
+import { A as setJointValue, B as walkAssembly, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as countNodes, H as circularPattern, I as createAssemblyNode, L as findNode, M as sphericalJoint, N as addChild, O as prismaticJoint, P as collectShapes, R as removeChild, S as addJoint, T as jointTransform, U as gridPattern, V as exportAssemblySTEP, W as linearPattern, Y as createAssembly, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as updateNode } from "./threadFns-BUy4gIG3.js";
+import { c as twistExtrude, o as supportExtrude, r as complexExtrude, s as sweep } from "./loftFns-mrTzIf4_.js";
 export { addChild, addJoint, addStep, circularPattern, collectShapes, complexExtrude, countNodes, createAssembly, createAssemblyNode, createHistory, createRegistry, cylindricalJoint, exportAssemblySTEP, exportURDF, findNode, findStep, forwardKinematics, getShape as getHistoryShape, gridPattern, importURDF, inverseKinematics, jointTrajectory, jointTransform, jointsFromDH, linearPattern, mechanismDOF, modifyStep, planarJoint, prismaticJoint, registerOperation, registerShape, removeChild, replayFrom, replayHistory, revoluteJoint, setJointValue, setJointValues, sphericalJoint, stepCount, stepsFrom, supportExtrude, sweep, thread, twistExtrude, undoLast, updateNode, walkAssembly };

package/dist/{primitiveFns-w-ST-RDJ.js → primitiveFns-BaYEo9qN.js}

@@ -1,11 +1,11 @@
-import { E as GeometryCleanupError, G as _usingCtx, d as createSolid, n as castResultShape, q as getKernel } from "./shapeTypes-w2wyXEis.js";
+import { E as GeometryCleanupError, G as _usingCtx, d as createSolid, n as castResultShape, q as getKernel } from "./shapeTypes-qhs8f2zx.js";
 import { E as ok, d as validationError, g as err, m as andThen, t as BrepErrorCode } from "./errors-BTccWbtE.js";
-import { n as isClosedWire } from "./validityTypes-C2K0Eepw.js";
+import { n as isClosedWire } from "./validityTypes-DiOmm0sf.js";
 import { n as HASH_CODE_MAX, t as DEG2RAD } from "./constants-iraOnb2p.js";
 import { d as vecNormalize, h as vecScale } from "./vecOps-S-m9H_fe.js";
-import { a as makeOffset, c as makeTorus, i as makeEllipsoid, l as makeVertex, n as makeCone, o as makeSolid, r as makeCylinder, s as makeSphere, t as makeCompound, u as weldShellsAndFaces } from "./solidBuilders-BxIYXIv-.js";
-import { f as collectInputFaceHashes, g as propagateMetadataThroughRelocation, h as propagateMetadataByHash, m as propagateAllMetadata, p as hasAnyMetadata } from "./booleanFns-Dtg2jqzi.js";
-import { _ as makeThreePointArc, a as makeNonPlanarFace, c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, g as makeTangentArc, h as makeLine, i as makeNewFaceWithinFace, m as makeHelix, o as makePolygon, p as makeEllipseArc, r as makeFace, s as assembleWire, t as addHolesInFace, u as makeBezierCurve } from "./surfaceBuilders-BZ7BW8I0.js";
+import { a as makeOffset, c as makeTorus, i as makeEllipsoid, l as makeVertex, n as makeCone, o as makeSolid, r as makeCylinder, s as makeSphere, t as makeCompound, u as weldShellsAndFaces } from "./solidBuilders-DhDGnOTQ.js";
+import { f as collectInputFaceHashes, g as propagateMetadataThroughRelocation, h as propagateMetadataByHash, m as propagateAllMetadata, p as hasAnyMetadata } from "./booleanFns-DIqS3nBK.js";
+import { _ as makeThreePointArc, a as makeNonPlanarFace, c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, g as makeTangentArc, h as makeLine, i as makeNewFaceWithinFace, m as makeHelix, o as makePolygon, p as makeEllipseArc, r as makeFace, s as assembleWire, t as addHolesInFace, u as makeBezierCurve } from "./surfaceBuilders-D9WX9gHX.js";
 // src/topology/transformFns.ts
 /**
 * Immutable shape transforms — translate, rotate, scale, mirror, applyMatrix.

package/dist/{primitiveFns-Dpn3ZtUE.cjs → primitiveFns-D8D9dI_P.cjs}

@@ -1,11 +1,11 @@
-const require_shapeTypes = require("./shapeTypes-DEe6gtTR.cjs");
+const require_shapeTypes = require("./shapeTypes-CgayxMvX.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_validityTypes = require("./validityTypes-DgknRAAp.cjs");
+const require_validityTypes = require("./validityTypes-DFEPeAkV.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
 const require_vecOps = require("./vecOps-CrGEPPQM.cjs");
-const require_solidBuilders = require("./solidBuilders-yQFZe6jf.cjs");
-const require_booleanFns = require("./booleanFns-Dti1CK1F.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-dWcQ_BpM.cjs");
+const require_solidBuilders = require("./solidBuilders-BvIdZUkI.cjs");
+const require_booleanFns = require("./booleanFns-CaHF13T-.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-BPAW6RbN.cjs");
 // src/topology/transformFns.ts
 /**
 * Immutable shape transforms — translate, rotate, scale, mirror, applyMatrix.

package/dist/{principalBoxFns-CjfJnZfH.js → principalBoxFns-CBWLch1h.js}

@@ -1,9 +1,9 @@
-import { G as _usingCtx, n as castResultShape, q as getKernel } from "./shapeTypes-w2wyXEis.js";
+import { G as _usingCtx, n as castResultShape, q as getKernel } from "./shapeTypes-qhs8f2zx.js";
 import { i as wasmIndex } from "./bug-ClMTAJhe.js";
 import { E as ok, d as validationError, g as err, t as BrepErrorCode, u as unsupportedError } from "./errors-BTccWbtE.js";
-import { E as kernelCallRaw } from "./topologyQueryFns-CTl4cWYD.js";
+import { E as kernelCallRaw } from "./topologyQueryFns-CArmw9sE.js";
 import { r as vecCross } from "./vecOps-S-m9H_fe.js";
-import { g as setCachedMeasurement, h as getCachedMeasurement, m as withSubShapes, p as withCompoundOf } from "./measureFns-WGYWWnQ1.js";
+import { g as setCachedMeasurement, h as getCachedMeasurement, m as withSubShapes, p as withCompoundOf } from "./measureFns-MSr05_kf.js";
 // src/measurement/principalBoxFns.ts
 /**
 * Principal-axes bounding box: a solid's extent measured in the frame of its

package/dist/{principalBoxFns-3ZURcOFP.cjs → principalBoxFns-CNSK-z3k.cjs}

@@ -1,9 +1,9 @@
-const require_shapeTypes = require("./shapeTypes-DEe6gtTR.cjs");
+const require_shapeTypes = require("./shapeTypes-CgayxMvX.cjs");
 const require_bug = require("./bug-CBcpIPuf.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-I_m8o-s7.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-EI-aso9K.cjs");
 const require_vecOps = require("./vecOps-CrGEPPQM.cjs");
-const require_measureFns = require("./measureFns-FrNeGmXh.cjs");
+const require_measureFns = require("./measureFns-CpoPgAZt.cjs");
 // src/measurement/principalBoxFns.ts
 /**
 * Principal-axes bounding box: a solid's extent measured in the frame of its

package/dist/projection.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_cameraFns = require("./cameraFns--Ab792oE.cjs");
+const require_cameraFns = require("./cameraFns-T60Qk0tk.cjs");
 exports.PROJECTION_PLANES = require_cameraFns.PROJECTION_PLANES;
 exports.cameraFromPlane = require_cameraFns.cameraFromPlane;
 exports.cameraLookAt = require_cameraFns.cameraLookAt;

package/dist/projection.js

@@ -1 +1 @@
-export { o as PROJECTION_PLANES, t as cameraFromPlane, n as cameraLookAt, r as createCamera, s as isProjectionPlane, a as makeProjectedEdges, i as projectEdges } from "./cameraFns-CXONX5Da.js";
+export { o as PROJECTION_PLANES, t as cameraFromPlane, n as cameraLookAt, r as createCamera, s as isProjectionPlane, a as makeProjectedEdges, i as projectEdges } from "./cameraFns-DB_nPXR7.js";

package/dist/query.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_helpers = require("./helpers-6Emek9dE.cjs");
-const require_cornerFinder = require("./cornerFinder-DUzrQsfW.cjs");
+const require_helpers = require("./helpers-CCnN8-PY.cjs");
+const require_cornerFinder = require("./cornerFinder-CNuTBfRo.cjs");
 exports.cornerFinder = require_cornerFinder.cornerFinder;
 exports.edgeFinder = require_helpers.edgeFinder;
 exports.faceFinder = require_helpers.faceFinder;

package/dist/query.js

@@ -1,3 +1,3 @@
-import { n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-DolHn2_s.js";
-import { t as cornerFinder } from "./cornerFinder-C7f43oKE.js";
+import { n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-Ci_WZ5ou.js";
+import { t as cornerFinder } from "./cornerFinder-GtiadLBr.js";
 export { cornerFinder, edgeFinder, faceFinder, getSingleFace };

package/dist/{refResolveFns-ROMmhWfH.cjs → refResolveFns-CuewCIRB.cjs}

@@ -1,10 +1,10 @@
-const require_shapeTypes = require("./shapeTypes-DEe6gtTR.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-I_m8o-s7.cjs");
-const require_faceFns = require("./faceFns-dj_c8LVc.cjs");
+const require_shapeTypes = require("./shapeTypes-CgayxMvX.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-EI-aso9K.cjs");
+const require_faceFns = require("./faceFns-CPGJ_cx6.cjs");
 const require_faceRoleFns = require("./faceRoleFns-Db5bYj4Q.cjs");
-const require_shapeFns = require("./shapeFns-CljM3iMI.cjs");
-const require_measureFns = require("./measureFns-FrNeGmXh.cjs");
-const require_adjacencyFns = require("./adjacencyFns-BLtq-nUN.cjs");
+const require_shapeFns = require("./shapeFns-Cklw3p3S.cjs");
+const require_measureFns = require("./measureFns-CpoPgAZt.cjs");
+const require_adjacencyFns = require("./adjacencyFns-B6fMyAj0.cjs");
 // src/topology/shapeRef/scoring.ts
 /**
 * Default face scorer combining surface type, normal alignment, centroid proximity,

package/dist/{refResolveFns-Yy1n2BHJ.js → refResolveFns-DaZPev13.js}

@@ -1,10 +1,10 @@
-import { g as disposeTransientSubShape, o as castShapeWithKnownType, q as getKernel } from "./shapeTypes-w2wyXEis.js";
-import { c as getFaces, w as vertexPosition } from "./topologyQueryFns-CTl4cWYD.js";
-import { i as faceGeomType, l as normalAt, r as faceCenter } from "./faceFns-BG1CBQUM.js";
+import { g as disposeTransientSubShape, o as castShapeWithKnownType, q as getKernel } from "./shapeTypes-qhs8f2zx.js";
+import { c as getFaces, w as vertexPosition } from "./topologyQueryFns-CArmw9sE.js";
+import { i as faceGeomType, l as normalAt, r as faceCenter } from "./faceFns-BNv6thpF.js";
 import { t as getFaceRoles } from "./faceRoleFns-BPxzQF-n.js";
-import { n as getHashCode } from "./shapeFns-BRRrZc1X.js";
-import { c as measureLength, r as measureArea } from "./measureFns-WGYWWnQ1.js";
-import { a as facesOfVertex, c as verticesOfFace, i as facesOfEdge, o as sharedEdges, s as verticesOfEdge, t as adjacentFaceHashes } from "./adjacencyFns-C1Hxy0tk.js";
+import { n as getHashCode } from "./shapeFns-3NzCE2kz.js";
+import { c as measureLength, r as measureArea } from "./measureFns-MSr05_kf.js";
+import { a as facesOfVertex, c as verticesOfFace, i as facesOfEdge, o as sharedEdges, s as verticesOfEdge, t as adjacentFaceHashes } from "./adjacencyFns-n6XWEyj1.js";
 // src/topology/shapeRef/scoring.ts
 /**
 * Default face scorer combining surface type, normal alignment, centroid proximity,

package/dist/{shapeFns-BRRrZc1X.js → shapeFns-3NzCE2kz.js}

@@ -1,6 +1,6 @@
-import { q as getKernel } from "./shapeTypes-w2wyXEis.js";
+import { q as getKernel } from "./shapeTypes-qhs8f2zx.js";
 import { t as BrepErrorCode } from "./errors-BTccWbtE.js";
-import { E as kernelCallRaw, T as kernelCall } from "./topologyQueryFns-CTl4cWYD.js";
+import { E as kernelCallRaw, T as kernelCall } from "./topologyQueryFns-CArmw9sE.js";
 import { n as HASH_CODE_MAX } from "./constants-iraOnb2p.js";
 // src/topology/shapeFns.ts
 /**

package/dist/{shapeFns-CljM3iMI.cjs → shapeFns-Cklw3p3S.cjs}

@@ -1,6 +1,6 @@
-const require_shapeTypes = require("./shapeTypes-DEe6gtTR.cjs");
+const require_shapeTypes = require("./shapeTypes-CgayxMvX.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-I_m8o-s7.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-EI-aso9K.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
 // src/topology/shapeFns.ts
 /**

package/dist/shapeRef.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_refResolveFns = require("./refResolveFns-ROMmhWfH.cjs");
+const require_refResolveFns = require("./refResolveFns-CuewCIRB.cjs");
 exports.assignRoles = require_refResolveFns.assignRoles;
 exports.captureHint = require_refResolveFns.captureHint;
 exports.createDerivedFaceRef = require_refResolveFns.createDerivedFaceRef;

package/dist/shapeRef.js

@@ -1 +1 @@
-export { h as assignRoles, g as captureHint, l as createDerivedFaceRef, p as createEdgeRef, _ as createRef, d as createVertexRef, b as defaultScorer, t as isDerivedFaceRef, n as isEdgeRef, r as isFaceRef, i as isLineageRef, a as isVertexRef, u as resolveDerivedFaceRef, m as resolveEdgeRef, o as resolveLineageRef, v as resolveRef, s as resolveRefIn, c as resolveRefParams, f as resolveVertexRef, y as updateRoles } from "./refResolveFns-Yy1n2BHJ.js";
+export { h as assignRoles, g as captureHint, l as createDerivedFaceRef, p as createEdgeRef, _ as createRef, d as createVertexRef, b as defaultScorer, t as isDerivedFaceRef, n as isEdgeRef, r as isFaceRef, i as isLineageRef, a as isVertexRef, u as resolveDerivedFaceRef, m as resolveEdgeRef, o as resolveLineageRef, v as resolveRef, s as resolveRefIn, c as resolveRefParams, f as resolveVertexRef, y as updateRoles } from "./refResolveFns-DaZPev13.js";

package/dist/{shapeTypes-DEe6gtTR.cjs → shapeTypes-CgayxMvX.cjs}

@@ -1,4 +1,4 @@
-const require_occtWasmAdapter = require("./occtWasmAdapter-B9ZXx36v.cjs");
+const require_occtWasmAdapter = require("./occtWasmAdapter-BH1JcAgl.cjs");
 const require_bug = require("./bug-CBcpIPuf.cjs");
 // src/kernel/quality.ts
 /**

package/dist/{shapeTypes-w2wyXEis.js → shapeTypes-qhs8f2zx.js}

@@ -1,4 +1,4 @@
-import { A as UnsupportedKernelOperationError, C as reverseCurve2d$2, D as tangentCurve2d, E as serializeCurve2d$2, N as EXACT_BREP_CAPABILITIES, O as translateCurve2d$2, P as OCCT_CAPABILITIES, S as offsetCurve2d$2, T as scaleCurve2d$2, _ as makeCircle2d$2, a as buildAsciiSTL, b as mirrorAcrossAxis, c as createBBox2d, d as deserializeCurve2d$2, f as evaluateCurve2d$2, g as makeBezier2d$2, h as makeArc2dThreePoints, i as DEFAULT_STL_TOLERANCE, j as isUnsupportedKernelOperationError, k as quickHull, l as curveBounds, m as makeArc2dTangent, o as buildBinarySTL, p as intersectCurves2dFn, r as DEFAULT_STL_ANGULAR_TOLERANCE, s as addCurveToBBox, t as OcctWasmAdapter, u as curveTypeName, v as makeEllipse2d$2, w as rotateCurve2d$2, x as mirrorAtPoint, y as makeLine2d$2 } from "./occtWasmAdapter-CGkZIHyM.js";
+import { A as UnsupportedKernelOperationError, C as reverseCurve2d$2, D as tangentCurve2d, E as serializeCurve2d$2, N as EXACT_BREP_CAPABILITIES, O as translateCurve2d$2, P as OCCT_CAPABILITIES, S as offsetCurve2d$2, T as scaleCurve2d$2, _ as makeCircle2d$2, a as buildAsciiSTL, b as mirrorAcrossAxis, c as createBBox2d, d as deserializeCurve2d$2, f as evaluateCurve2d$2, g as makeBezier2d$2, h as makeArc2dThreePoints, i as DEFAULT_STL_TOLERANCE, j as isUnsupportedKernelOperationError, k as quickHull, l as curveBounds, m as makeArc2dTangent, o as buildBinarySTL, p as intersectCurves2dFn, r as DEFAULT_STL_ANGULAR_TOLERANCE, s as addCurveToBBox, t as OcctWasmAdapter, u as curveTypeName, v as makeEllipse2d$2, w as rotateCurve2d$2, x as mirrorAtPoint, y as makeLine2d$2 } from "./occtWasmAdapter-DD_6IAVj.js";
 import { i as wasmIndex, r as vec3At } from "./bug-ClMTAJhe.js";
 // src/kernel/quality.ts
 /**

package/dist/sketching.cjs

@@ -1,7 +1,7 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_blueprintSketcher = require("./blueprintSketcher-DUT3-Cuo.cjs");
-const require_drawFns = require("./drawFns-BRXk9fLg.cjs");
-const require_textBlueprints = require("./textBlueprints-Tx73Xex5.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-zx0yhxOF.cjs");
+const require_drawFns = require("./drawFns-DCY1v4nI.cjs");
+const require_textBlueprints = require("./textBlueprints-CTMykb_E.cjs");
 // src/sketching.ts
 /**
 * brepjs/sketching — Sketcher, Drawing, and sketch-to-shape operations.

package/dist/sketching.js

@@ -1,6 +1,6 @@
-import { n as BaseSketcher2d, t as BlueprintSketcher } from "./blueprintSketcher-BrQee61I.js";
-import { A as sketchEllipse, C as DrawingPen, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, T as Drawing, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-WvF0fehK.js";
-import { a as Sketches, c as compoundSketchFace, d as sketchExtrude, f as sketchFace, g as sketchWires, h as sketchSweep, l as compoundSketchLoft, m as sketchRevolve, o as Sketch, p as sketchLoft, s as compoundSketchExtrude, u as compoundSketchRevolve, y as CompoundSketch } from "./textBlueprints-CxhhPEaF.js";
+import { n as BaseSketcher2d, t as BlueprintSketcher } from "./blueprintSketcher-D81yS5Em.js";
+import { A as sketchEllipse, C as DrawingPen, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, T as Drawing, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-D9GuLtRK.js";
+import { a as Sketches, c as compoundSketchFace, d as sketchExtrude, f as sketchFace, g as sketchWires, h as sketchSweep, l as compoundSketchLoft, m as sketchRevolve, o as Sketch, p as sketchLoft, s as compoundSketchExtrude, u as compoundSketchRevolve, y as CompoundSketch } from "./textBlueprints-CxufM4VF.js";
 // src/sketching.ts
 /**
 * brepjs/sketching — Sketcher, Drawing, and sketch-to-shape operations.

package/dist/{solidBuilders-yQFZe6jf.cjs → solidBuilders-BvIdZUkI.cjs}

@@ -1,8 +1,8 @@
-const require_shapeTypes = require("./shapeTypes-DEe6gtTR.cjs");
+const require_shapeTypes = require("./shapeTypes-CgayxMvX.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-I_m8o-s7.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-EI-aso9K.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
-const require_faceFns = require("./faceFns-dj_c8LVc.cjs");
+const require_faceFns = require("./faceFns-CPGJ_cx6.cjs");
 // src/topology/metadata/originTrackingFns.ts
 /**
 * Face origin tracking — tag faces with integer origins and propagate

package/dist/{solidBuilders-BxIYXIv-.js → solidBuilders-DhDGnOTQ.js}

@@ -1,8 +1,8 @@
-import { C as isSolid, G as _usingCtx, S as isShell, d as createSolid, f as createVertex, h as disposeResultShape, n as castResultShape, q as getKernel, s as createCompound, x as isShape3D } from "./shapeTypes-w2wyXEis.js";
+import { C as isSolid, G as _usingCtx, S as isShell, d as createSolid, f as createVertex, h as disposeResultShape, n as castResultShape, q as getKernel, s as createCompound, x as isShape3D } from "./shapeTypes-qhs8f2zx.js";
 import { E as ok, g as err, l as typeCastError, m as andThen } from "./errors-BTccWbtE.js";
-import { C as subShapeHashes, c as getFaces, l as getOrCreateCache, r as getCacheEntry } from "./topologyQueryFns-CTl4cWYD.js";
+import { C as subShapeHashes, c as getFaces, l as getOrCreateCache, r as getCacheEntry } from "./topologyQueryFns-CArmw9sE.js";
 import { n as HASH_CODE_MAX } from "./constants-iraOnb2p.js";
-import { _ as cast, y as downcast } from "./faceFns-BG1CBQUM.js";
+import { _ as cast, y as downcast } from "./faceFns-BNv6thpF.js";
 // src/topology/metadata/originTrackingFns.ts
 /**
 * Face origin tracking — tag faces with integer origins and propagate

package/dist/{surfaceBuilders-dWcQ_BpM.cjs → surfaceBuilders-BPAW6RbN.cjs}

@@ -1,7 +1,7 @@
-const require_shapeTypes = require("./shapeTypes-DEe6gtTR.cjs");
+const require_shapeTypes = require("./shapeTypes-CgayxMvX.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_validityTypes = require("./validityTypes-DgknRAAp.cjs");
-const require_faceFns = require("./faceFns-dj_c8LVc.cjs");
+const require_validityTypes = require("./validityTypes-DFEPeAkV.cjs");
+const require_faceFns = require("./faceFns-CPGJ_cx6.cjs");
 // src/utils/range.ts
 /** Generate an array of integers `[0, 1, …, len - 1]`. */
 function range(len) {

package/dist/{surfaceBuilders-BZ7BW8I0.js → surfaceBuilders-D9WX9gHX.js}

@@ -1,7 +1,7 @@
-import { G as _usingCtx, N as DisposalScope, c as createEdge, l as createFace, p as createWire, q as getKernel, y as isFace } from "./shapeTypes-w2wyXEis.js";
+import { G as _usingCtx, N as DisposalScope, c as createEdge, l as createFace, p as createWire, q as getKernel, y as isFace } from "./shapeTypes-qhs8f2zx.js";
 import { E as ok, d as validationError, g as err, i as kernelError, m as andThen } from "./errors-BTccWbtE.js";
-import { a as isPlanarFace } from "./validityTypes-C2K0Eepw.js";
-import { _ as cast, u as outerWire } from "./faceFns-BG1CBQUM.js";
+import { a as isPlanarFace } from "./validityTypes-DiOmm0sf.js";
+import { _ as cast, u as outerWire } from "./faceFns-BNv6thpF.js";
 // src/utils/range.ts
 /** Generate an array of integers `[0, 1, …, len - 1]`. */
 function range(len) {

package/dist/text.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_textBlueprints = require("./textBlueprints-Tx73Xex5.cjs");
-const require_textMetrics = require("./textMetrics-9q5S5II9.cjs");
+const require_textBlueprints = require("./textBlueprints-CTMykb_E.cjs");
+const require_textMetrics = require("./textMetrics-D51K9Ddx.cjs");
 exports.fontMetrics = require_textMetrics.fontMetrics;
 exports.getFont = require_textBlueprints.getFont;
 exports.loadFont = require_textBlueprints.loadFont;

package/dist/text.js

@@ -1,3 +1,3 @@
-import { i as setFallbackFont, n as getFont, r as loadFont, t as textBlueprints } from "./textBlueprints-CxhhPEaF.js";
-import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-B5dKPalE.js";
+import { i as setFallbackFont, n as getFont, r as loadFont, t as textBlueprints } from "./textBlueprints-CxufM4VF.js";
+import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-CdvERXfK.js";
 export { fontMetrics, getFont, loadFont, setFallbackFont, sketchText, textBlueprints, textMetrics };

package/dist/{textBlueprints-Tx73Xex5.cjs → textBlueprints-CTMykb_E.cjs}

@@ -1,20 +1,20 @@
 const require_rolldown_runtime = require("./rolldown-runtime-BW-eSwOZ.cjs");
-const require_shapeTypes = require("./shapeTypes-DEe6gtTR.cjs");
+const require_shapeTypes = require("./shapeTypes-CgayxMvX.cjs");
 const require_bug = require("./bug-CBcpIPuf.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
 const require_types = require("./types-CjF9Rofr.cjs");
 const require_vecOps = require("./vecOps-CrGEPPQM.cjs");
 const require_planeOps = require("./planeOps-DZfLToKZ.cjs");
-const require_faceFns = require("./faceFns-dj_c8LVc.cjs");
-const require_solidBuilders = require("./solidBuilders-yQFZe6jf.cjs");
-const require_booleanFns = require("./booleanFns-Dti1CK1F.cjs");
+const require_faceFns = require("./faceFns-CPGJ_cx6.cjs");
+const require_solidBuilders = require("./solidBuilders-BvIdZUkI.cjs");
+const require_booleanFns = require("./booleanFns-CaHF13T-.cjs");
 const require_faceRoleFns = require("./faceRoleFns-Db5bYj4Q.cjs");
-const require_curveFns = require("./curveFns-QaNfJzko.cjs");
+const require_curveFns = require("./curveFns-m73YVbFb.cjs");
 const require_arrayAccess = require("./arrayAccess-DpJYARwv.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-dWcQ_BpM.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-DUT3-Cuo.cjs");
-const require_loftFns = require("./loftFns-BD0na-M4.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-BPAW6RbN.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-zx0yhxOF.cjs");
+const require_loftFns = require("./loftFns-DQJM-35I.cjs");
 let opentype_js = require("opentype.js");
 opentype_js = require_rolldown_runtime.__toESM(opentype_js, 1);
 // src/topology/shapeRef/extrudeRoleFns.ts

package/dist/{textBlueprints-CxhhPEaF.js → textBlueprints-CxufM4VF.js}

@@ -1,19 +1,19 @@
-import { d as createSolid, h as disposeResultShape, l as createFace, m as disposeDowncastSource, n as castResultShape, p as createWire, q as getKernel, x as isShape3D } from "./shapeTypes-w2wyXEis.js";
+import { d as createSolid, h as disposeResultShape, l as createFace, m as disposeDowncastSource, n as castResultShape, p as createWire, q as getKernel, x as isShape3D } from "./shapeTypes-qhs8f2zx.js";
 import { n as bug } from "./bug-ClMTAJhe.js";
 import { E as ok, P as unwrap, d as validationError, g as err, i as kernelError, l as typeCastError, r as ioError, t as BrepErrorCode } from "./errors-BTccWbtE.js";
 import { n as HASH_CODE_MAX } from "./constants-iraOnb2p.js";
 import { r as toVec3 } from "./types-CKXsIm9-.js";
 import { c as vecLength, d as vecNormalize, h as vecScale, i as vecDistance, r as vecCross, t as vecAdd } from "./vecOps-S-m9H_fe.js";
 import { n as createPlane } from "./planeOps-D3yDuMux.js";
-import { v as copyShape } from "./faceFns-BG1CBQUM.js";
-import { o as makeSolid, t as makeCompound } from "./solidBuilders-BxIYXIv-.js";
-import { i as cutAll } from "./booleanFns-Dtg2jqzi.js";
+import { v as copyShape } from "./faceFns-BNv6thpF.js";
+import { o as makeSolid, t as makeCompound } from "./solidBuilders-DhDGnOTQ.js";
+import { i as cutAll } from "./booleanFns-DIqS3nBK.js";
 import { i as setFaceRoles } from "./faceRoleFns-BPxzQF-n.js";
-import { l as curveStartPoint, u as curveTangentAt } from "./curveFns-Dzgl3_MC.js";
+import { l as curveStartPoint, u as curveTangentAt } from "./curveFns-CGQCy_D5.js";
 import { n as getAtOrThrow, t as firstOrThrow } from "./arrayAccess-BpgouNir.js";
-import { i as makeNewFaceWithinFace, r as makeFace, t as addHolesInFace } from "./surfaceBuilders-BZ7BW8I0.js";
-import { r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-BrQee61I.js";
-import { c as twistExtrude, r as complexExtrude, s as sweep, t as loft } from "./loftFns-Cua-MamP.js";
+import { i as makeNewFaceWithinFace, r as makeFace, t as addHolesInFace } from "./surfaceBuilders-D9WX9gHX.js";
+import { r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-D81yS5Em.js";
+import { c as twistExtrude, r as complexExtrude, s as sweep, t as loft } from "./loftFns-mrTzIf4_.js";
 import opentype from "opentype.js";
 // src/topology/shapeRef/extrudeRoleFns.ts
 /** Match tolerance as a fraction of the extrusion's size. */

package/dist/{textMetrics-B5dKPalE.js → textMetrics-CdvERXfK.js}

@@ -1,5 +1,5 @@
 import { E as ok, d as validationError, g as err, t as BrepErrorCode } from "./errors-BTccWbtE.js";
-import { _ as wrapSketchData, a as Sketches, n as getFont, t as textBlueprints, y as CompoundSketch } from "./textBlueprints-CxhhPEaF.js";
+import { _ as wrapSketchData, a as Sketches, n as getFont, t as textBlueprints, y as CompoundSketch } from "./textBlueprints-CxufM4VF.js";
 // src/text/sketchText.ts
 /**
 * Render text as 3D sketch outlines on a plane.

package/dist/{textMetrics-9q5S5II9.cjs → textMetrics-D51K9Ddx.cjs}

@@ -1,5 +1,5 @@
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_textBlueprints = require("./textBlueprints-Tx73Xex5.cjs");
+const require_textBlueprints = require("./textBlueprints-CTMykb_E.cjs");
 // src/text/sketchText.ts
 /**
 * Render text as 3D sketch outlines on a plane.

package/dist/{threadFns-Dfu2jV41.js → threadFns-BUy4gIG3.js}

@@ -1,12 +1,12 @@
-import { F as createKernelHandle, G as _usingCtx, N as DisposalScope, n as castResultShape, q as getKernel, x as isShape3D } from "./shapeTypes-w2wyXEis.js";
+import { F as createKernelHandle, G as _usingCtx, N as DisposalScope, n as castResultShape, q as getKernel, x as isShape3D } from "./shapeTypes-qhs8f2zx.js";
 import { E as ok, d as validationError, g as err, n as computationError, r as ioError, t as BrepErrorCode, x as isOk } from "./errors-BTccWbtE.js";
 import { d as vecNormalize, s as vecIsZero } from "./vecOps-S-m9H_fe.js";
-import { b as fromBREP } from "./faceFns-BG1CBQUM.js";
-import { o as fuseAll } from "./booleanFns-Dtg2jqzi.js";
-import { E as wire, h as line } from "./primitiveFns-w-ST-RDJ.js";
-import { s as toBREP, t as clone } from "./shapeFns-BRRrZc1X.js";
-import { t as loft } from "./loftFns-Cua-MamP.js";
-import { c as resolveRefParams } from "./refResolveFns-Yy1n2BHJ.js";
+import { b as fromBREP } from "./faceFns-BNv6thpF.js";
+import { o as fuseAll } from "./booleanFns-DIqS3nBK.js";
+import { E as wire, h as line } from "./primitiveFns-BaYEo9qN.js";
+import { s as toBREP, t as clone } from "./shapeFns-3NzCE2kz.js";
+import { t as loft } from "./loftFns-mrTzIf4_.js";
+import { c as resolveRefParams } from "./refResolveFns-DaZPev13.js";
 // src/utils/uuid.ts
 /** Generate a v4-style UUID string using `crypto.getRandomValues`. */
 function uuidv() {

package/dist/{threadFns-BnNo5eND.cjs → threadFns-zNevH3kU.cjs}

@@ -1,12 +1,12 @@
-const require_shapeTypes = require("./shapeTypes-DEe6gtTR.cjs");
+const require_shapeTypes = require("./shapeTypes-CgayxMvX.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
 const require_vecOps = require("./vecOps-CrGEPPQM.cjs");
-const require_faceFns = require("./faceFns-dj_c8LVc.cjs");
-const require_booleanFns = require("./booleanFns-Dti1CK1F.cjs");
-const require_primitiveFns = require("./primitiveFns-Dpn3ZtUE.cjs");
-const require_shapeFns = require("./shapeFns-CljM3iMI.cjs");
-const require_loftFns = require("./loftFns-BD0na-M4.cjs");
-const require_refResolveFns = require("./refResolveFns-ROMmhWfH.cjs");
+const require_faceFns = require("./faceFns-CPGJ_cx6.cjs");
+const require_booleanFns = require("./booleanFns-CaHF13T-.cjs");
+const require_primitiveFns = require("./primitiveFns-D8D9dI_P.cjs");
+const require_shapeFns = require("./shapeFns-Cklw3p3S.cjs");
+const require_loftFns = require("./loftFns-DQJM-35I.cjs");
+const require_refResolveFns = require("./refResolveFns-CuewCIRB.cjs");
 // src/utils/uuid.ts
 /** Generate a v4-style UUID string using `crypto.getRandomValues`. */
 function uuidv() {

package/dist/topology/apiTypes.d.ts

@@ -19,7 +19,8 @@ export type FinderFn<T extends AnyShape<Dimension>> = (finder: FinderFor<T>) =>
  * Fillet radius specification.
  *
  * - `number` — constant radius on all selected edges
- * - `[number, number]` — variable radius (start, end)
+ * - `[number, number]` — variable radius (start, end); one end may be 0, so the
+ *   fillet runs out there (occt-wasm builds that only through `variableFillet`)
  * - callback — per-edge radius; return `null` to skip an edge
  */
 export type FilletRadius = number | [number, number] | ((edge: Edge) => number | [number, number] | null);

package/dist/topology/modifierFns.d.ts

@@ -4,6 +4,14 @@ import { Result } from '../core/result.js';
 import { BrepError } from '../core/errors.js';
 import { Vec3 } from '../core/types.js';
 import { DraftAngle } from './apiTypes.js';
+type ValuePair = readonly [number, number];
+/**
+ * A fillet's start and end radius: one may be 0, so the fillet runs out to
+ * nothing at that end of the edge, but not both, and neither below 0.
+ */
+export declare function isFilletRadiusPair([start, end]: ValuePair): boolean;
+export declare const FILLET_PAIR_MESSAGE = "Fillet radii must not be negative, and one must be positive";
+export declare const FILLET_PAIR_HINT = "A radius may run to 0 at one end of the edge, but the other must be greater than 0";
 /**
  * Thickens a surface (face or shell) into a solid by offsetting it.
  *
@@ -90,6 +98,8 @@ export interface VariableFilletRadius {
  *
  * The radius varies along the edge according to the provided spec points.
  * Each point specifies a normalized parameter (0 = start, 1 = end) and radius.
+ * A radius may be 0, so the fillet runs out to nothing there, as long as one
+ * is positive.
  *
  * **Cross-kernel note:** occt-wasm and brepkit build a constant or linear
  * (start/end, <=2-point) profile and return `UNSUPPORTED_CAPABILITY` for one of
@@ -110,3 +120,4 @@ export declare function variableFillet(shape: ValidSolid, edge: Edge, radii: Rea
  *   defeaturing.
  */
 export declare function removeFaces(shape: ValidSolid, faces: ReadonlyArray<Face>): Result<ValidSolid>;
+export {};

package/dist/topology.cjs

@@ -1,13 +1,13 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_topologyQueryFns = require("./topologyQueryFns-I_m8o-s7.cjs");
-const require_faceFns = require("./faceFns-dj_c8LVc.cjs");
-const require_booleanFns = require("./booleanFns-Dti1CK1F.cjs");
-const require_primitiveFns = require("./primitiveFns-Dpn3ZtUE.cjs");
-const require_shapeFns = require("./shapeFns-CljM3iMI.cjs");
-const require_curveFns = require("./curveFns-QaNfJzko.cjs");
-const require_meshFns = require("./meshFns-Dy1a9wl_.cjs");
-const require_healingFns = require("./healingFns-BSNNLyXP.cjs");
-const require_adjacencyFns = require("./adjacencyFns-BLtq-nUN.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-EI-aso9K.cjs");
+const require_faceFns = require("./faceFns-CPGJ_cx6.cjs");
+const require_booleanFns = require("./booleanFns-CaHF13T-.cjs");
+const require_primitiveFns = require("./primitiveFns-D8D9dI_P.cjs");
+const require_shapeFns = require("./shapeFns-Cklw3p3S.cjs");
+const require_curveFns = require("./curveFns-m73YVbFb.cjs");
+const require_meshFns = require("./meshFns-BxRKwY5z.cjs");
+const require_healingFns = require("./healingFns-D33MBaNA.cjs");
+const require_adjacencyFns = require("./adjacencyFns-B6fMyAj0.cjs");
 exports.addHoles = require_primitiveFns.addHoles;
 exports.adjacentFaces = require_adjacencyFns.adjacentFaces;
 exports.approximateCurve = require_curveFns.approximateCurve;

package/dist/topology.js

@@ -1,10 +1,10 @@
-import { _ as iterFaces, b as iterVertices, c as getFaces, f as getVertices, g as iterEdges, m as invalidateShapeCache, n as getBounds, p as getWires, s as getEdges, w as vertexPosition, x as iterWires } from "./topologyQueryFns-CTl4cWYD.js";
-import { C as shapeType, S as iterTopo, _ as cast, a as faceOrientation, b as fromBREP, c as innerWires, d as pointOnSurface, f as projectPointOnFace, g as asTopo, h as uvCoordinates, i as faceGeomType, l as normalAt, m as uvBounds, n as faceAxis, o as flipFaceOrientation, r as faceCenter, s as getSurfaceType, t as classifyPointOnFace, u as outerWire, x as isCompSolid, y as downcast } from "./faceFns-BG1CBQUM.js";
-import { i as cutAll, o as fuseAll } from "./booleanFns-Dtg2jqzi.js";
-import { C as threePointArc, D as wireLoop, E as wire, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus, x as subFace, y as solid } from "./primitiveFns-w-ST-RDJ.js";
-import { a as isSameShape, i as isEqualShape, n as getHashCode } from "./shapeFns-BRRrZc1X.js";
-import { a as curveIsPeriodic, c as curvePointAt, d as flipOrientation, f as getCurveType, h as offsetWire2D, i as curveIsClosed, l as curveStartPoint, m as interpolateCurve, n as curveAxis, o as curveLength, p as getOrientation, r as curveEndPoint, s as curvePeriod, t as approximateCurve, u as curveTangentAt } from "./curveFns-Dzgl3_MC.js";
-import { f as clearMeshCache, n as exportSTEP, p as createMeshCache, r as exportSTL, t as exportIGES } from "./meshFns-Lie8oAac.js";
-import { I as toLineGeometryData, M as toBufferGeometryData, N as toGroupedBufferGeometryData, S as chamferDistAngle, _ as checkBoolean, a as healFace, b as getNurbsCurveData, d as chamferWithEvolution, f as cutWithEvolution, g as shellWithEvolution, h as intersectWithEvolution, j as variableFillet, l as solidFromShell, m as fuseWithEvolution, n as fixSelfIntersection, o as healSolid, p as filletWithEvolution, r as fixShape, s as healWire, t as autoHeal, u as positionOnCurve, v as cutAllBisect, x as getNurbsSurfaceData, y as fuseAllBisect } from "./healingFns-CfkUEqcL.js";
-import { i as facesOfEdge, l as wiresOfFace, n as adjacentFaces, o as sharedEdges, r as edgesOfFace, s as verticesOfEdge } from "./adjacencyFns-C1Hxy0tk.js";
+import { _ as iterFaces, b as iterVertices, c as getFaces, f as getVertices, g as iterEdges, m as invalidateShapeCache, n as getBounds, p as getWires, s as getEdges, w as vertexPosition, x as iterWires } from "./topologyQueryFns-CArmw9sE.js";
+import { C as shapeType, S as iterTopo, _ as cast, a as faceOrientation, b as fromBREP, c as innerWires, d as pointOnSurface, f as projectPointOnFace, g as asTopo, h as uvCoordinates, i as faceGeomType, l as normalAt, m as uvBounds, n as faceAxis, o as flipFaceOrientation, r as faceCenter, s as getSurfaceType, t as classifyPointOnFace, u as outerWire, x as isCompSolid, y as downcast } from "./faceFns-BNv6thpF.js";
+import { i as cutAll, o as fuseAll } from "./booleanFns-DIqS3nBK.js";
+import { C as threePointArc, D as wireLoop, E as wire, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus, x as subFace, y as solid } from "./primitiveFns-BaYEo9qN.js";
+import { a as isSameShape, i as isEqualShape, n as getHashCode } from "./shapeFns-3NzCE2kz.js";
+import { a as curveIsPeriodic, c as curvePointAt, d as flipOrientation, f as getCurveType, h as offsetWire2D, i as curveIsClosed, l as curveStartPoint, m as interpolateCurve, n as curveAxis, o as curveLength, p as getOrientation, r as curveEndPoint, s as curvePeriod, t as approximateCurve, u as curveTangentAt } from "./curveFns-CGQCy_D5.js";
+import { f as clearMeshCache, n as exportSTEP, p as createMeshCache, r as exportSTL, t as exportIGES } from "./meshFns-BIWD7IFN.js";
+import { I as toLineGeometryData, M as toBufferGeometryData, N as toGroupedBufferGeometryData, S as chamferDistAngle, _ as checkBoolean, a as healFace, b as getNurbsCurveData, d as chamferWithEvolution, f as cutWithEvolution, g as shellWithEvolution, h as intersectWithEvolution, j as variableFillet, l as solidFromShell, m as fuseWithEvolution, n as fixSelfIntersection, o as healSolid, p as filletWithEvolution, r as fixShape, s as healWire, t as autoHeal, u as positionOnCurve, v as cutAllBisect, x as getNurbsSurfaceData, y as fuseAllBisect } from "./healingFns-w-PHd-Lj.js";
+import { i as facesOfEdge, l as wiresOfFace, n as adjacentFaces, o as sharedEdges, r as edgesOfFace, s as verticesOfEdge } from "./adjacencyFns-n6XWEyj1.js";
 export { addHoles, adjacentFaces, approximateCurve, asTopo, autoHeal, bezier, box, bsplineApprox, cast, chamferDistAngle as chamferDistAngleShape, chamferWithEvolution, checkBoolean, circle, classifyPointOnFace, clearMeshCache, compound, cone, createMeshCache, curveAxis, curveEndPoint, curveIsClosed, curveIsPeriodic, curveLength, curvePeriod, curvePointAt, curveStartPoint, curveTangentAt, cutAll, cutAllBisect, cutWithEvolution, cylinder, fromBREP as deserializeShape, downcast, edgesOfFace, ellipse, ellipseArc, ellipsoid, exportIGES, exportSTEP, exportSTL, face, faceAxis, faceCenter, faceGeomType, faceOrientation, facesOfEdge, filledFace, filletWithEvolution, fixSelfIntersection, fixShape, flipFaceOrientation, flipOrientation, fuseAll, fuseAllBisect, fuseWithEvolution, getBounds, getCurveType, getEdges, getFaces, getHashCode, getNurbsCurveData, getNurbsSurfaceData, getOrientation, getSurfaceType, getVertices, getWires, healFace, healSolid, healWire, helix, innerWires, interpolateCurve, intersectWithEvolution, invalidateShapeCache, isCompSolid, isEqualShape, isSameShape, iterEdges, iterFaces, iterTopo, iterVertices, iterWires, line, normalAt, offsetFace, offsetWire2D, outerWire, pointOnSurface, polygon, positionOnCurve, projectPointOnFace, sewShells, shapeType, sharedEdges, shellWithEvolution, solid, solidFromShell, sphere, subFace, tangentArc, threePointArc, toBufferGeometryData, toGroupedBufferGeometryData, toLineGeometryData, torus, uvBounds, uvCoordinates, variableFillet, vertex, vertexPosition, verticesOfEdge, wire, wireLoop, wiresOfFace };

package/dist/{topologyQueryFns-CTl4cWYD.js → topologyQueryFns-CArmw9sE.js}

@@ -1,4 +1,4 @@
-import { G as _usingCtx, N as DisposalScope, O as getOrQueryType, n as castResultShape, q as getKernel, r as castResultShapeWithKnownType } from "./shapeTypes-w2wyXEis.js";
+import { G as _usingCtx, N as DisposalScope, O as getOrQueryType, n as castResultShape, q as getKernel, r as castResultShapeWithKnownType } from "./shapeTypes-qhs8f2zx.js";
 import { E as ok, g as err } from "./errors-BTccWbtE.js";
 import { n as HASH_CODE_MAX } from "./constants-iraOnb2p.js";
 // src/core/kernelErrorTranslation.ts

package/dist/{topologyQueryFns-I_m8o-s7.cjs → topologyQueryFns-EI-aso9K.cjs}

@@ -1,4 +1,4 @@
-const require_shapeTypes = require("./shapeTypes-DEe6gtTR.cjs");
+const require_shapeTypes = require("./shapeTypes-CgayxMvX.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
 // src/core/kernelErrorTranslation.ts

package/dist/{validityTypes-DgknRAAp.cjs → validityTypes-DFEPeAkV.cjs}

@@ -1,4 +1,4 @@
-const require_shapeTypes = require("./shapeTypes-DEe6gtTR.cjs");
+const require_shapeTypes = require("./shapeTypes-CgayxMvX.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
 // src/core/validityTypes.ts
 /**