brepjs 20.13.6 → 20.14.0

package/dist/{faceFns-BG1CBQUM.js → faceFns-BNv6thpF.js}

@@ -1,6 +1,6 @@
-import { O as getOrQueryType, i as castShape, q as getKernel } from "./shapeTypes-w2wyXEis.js";
+import { O as getOrQueryType, i as castShape, q as getKernel } from "./shapeTypes-qhs8f2zx.js";
 import { E as ok, P as unwrap, g as err, l as typeCastError } from "./errors-BTccWbtE.js";
-import { a as getCachedSurfaceType } from "./topologyQueryFns-CTl4cWYD.js";
+import { a as getCachedSurfaceType } from "./topologyQueryFns-CArmw9sE.js";
 import { r as toVec3 } from "./types-CKXsIm9-.js";
 // src/topology/cast.ts
 var TOPO_ENUM = {

package/dist/{faceFns-dj_c8LVc.cjs → faceFns-CPGJ_cx6.cjs}

@@ -1,6 +1,6 @@
-const require_shapeTypes = require("./shapeTypes-DEe6gtTR.cjs");
+const require_shapeTypes = require("./shapeTypes-CgayxMvX.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-I_m8o-s7.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-EI-aso9K.cjs");
 const require_types = require("./types-CjF9Rofr.cjs");
 // src/topology/cast.ts
 var TOPO_ENUM = {

package/dist/{healingFns-BSNNLyXP.cjs → healingFns-D33MBaNA.cjs}

@@ -1,13 +1,13 @@
-const require_shapeTypes = require("./shapeTypes-DEe6gtTR.cjs");
-const require_occtWasmAdapter = require("./occtWasmAdapter-B9ZXx36v.cjs");
+const require_shapeTypes = require("./shapeTypes-CgayxMvX.cjs");
+const require_occtWasmAdapter = require("./occtWasmAdapter-BH1JcAgl.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-I_m8o-s7.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-EI-aso9K.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
-const require_faceFns = require("./faceFns-dj_c8LVc.cjs");
-const require_booleanFns = require("./booleanFns-Dti1CK1F.cjs");
-const require_shapeFns = require("./shapeFns-CljM3iMI.cjs");
+const require_faceFns = require("./faceFns-CPGJ_cx6.cjs");
+const require_booleanFns = require("./booleanFns-CaHF13T-.cjs");
+const require_shapeFns = require("./shapeFns-Cklw3p3S.cjs");
 const require_arrayAccess = require("./arrayAccess-DpJYARwv.cjs");
-const require_adjacencyFns = require("./adjacencyFns-BLtq-nUN.cjs");
+const require_adjacencyFns = require("./adjacencyFns-B6fMyAj0.cjs");
 // src/topology/threeHelpers.ts
 /**
 * Convert a ShapeMesh into BufferGeometry-compatible typed arrays.
@@ -213,28 +213,41 @@ function validateNotNull$1(shape, label) {
 	if (require_shapeTypes.getKernel().isNull(shape.wrapped)) return require_errors.err(require_errors.validationError(require_errors.BrepErrorCode.NULL_SHAPE_INPUT, `${label} is a null shape`));
 	return require_errors.ok(void 0);
 }
+function isPositivePair([a, b]) {
+	return a > 0 && b > 0;
+}
 /**
-* Validate that a scalar or `[a, b]` pair is positive.
+* A fillet's start and end radius: one may be 0, so the fillet runs out to
+* nothing at that end of the edge, but not both, and neither below 0.
+*/
+function isFilletRadiusPair([start, end]) {
+	return start >= 0 && end >= 0 && (start > 0 || end > 0);
+}
+var FILLET_PAIR_MESSAGE = "Fillet radii must not be negative, and one must be positive";
+var FILLET_PAIR_HINT = "A radius may run to 0 at one end of the edge, but the other must be greater than 0";
+/**
+* Validate that a scalar is positive and that an `[a, b]` pair passes
+* `isValidPair` (both positive by default).
 * Returns an Err Result on failure, `undefined` on success.
 *
 * Function-type values (per-edge callbacks) are intentionally skipped here --
 * they are validated lazily in {@link resolveEdgeCallback} when each edge is processed.
 */
-function validatePositiveParam(value, msgs) {
+function validatePositiveParam(value, msgs, isValidPair = isPositivePair) {
 	if (typeof value === "number" && value <= 0) return require_errors.err(require_errors.validationError(msgs.code, msgs.scalar, void 0, void 0, msgs.scalarHint));
-	if (Array.isArray(value) && (value[0] <= 0 || value[1] <= 0)) return require_errors.err(require_errors.validationError(msgs.code, msgs.pair, void 0, void 0, msgs.pairHint));
+	if (Array.isArray(value) && !isValidPair(value)) return require_errors.err(require_errors.validationError(msgs.code, msgs.pair, void 0, void 0, msgs.pairHint));
 }
 /**
 * When the user supplies a per-edge callback, pre-filter edges and build a
 * hash-indexed lookup for the kernel. Returns `null` if no edges survive.
 */
-function resolveEdgeCallback$1(selectedEdges, callbackFn) {
+function resolveEdgeCallback$1(selectedEdges, callbackFn, isValidPair = isPositivePair) {
 	const filteredEdges = [];
 	const hashToValue = /* @__PURE__ */ new Map();
 	for (const edge of selectedEdges) {
 		const val = callbackFn(edge) ?? 0;
 		if (typeof val === "number" && val <= 0) continue;
-		if (Array.isArray(val) && (val[0] <= 0 || val[1] <= 0)) continue;
+		if (Array.isArray(val) && !isValidPair(val)) continue;
 		filteredEdges.push(edge);
 		hashToValue.set(require_shapeTypes.getKernel().hashCode(edge.wrapped, require_constants.HASH_CODE_MAX), val);
 	}
@@ -320,15 +333,15 @@ function normalizeFilletInputs(shape, edges, radius) {
 	const paramErr = validatePositiveParam(radius, {
 		code: "INVALID_FILLET_RADIUS",
 		scalar: "Fillet radius must be positive",
-		pair: "Fillet radii must both be positive",
+		pair: FILLET_PAIR_MESSAGE,
 		scalarHint: "Provide a positive radius value greater than 0",
-		pairHint: "Both radius values must be greater than 0"
-	});
+		pairHint: FILLET_PAIR_HINT
+	}, isFilletRadiusPair);
 	if (paramErr) return paramErr;
 	const selectedEdges = edges ?? require_topologyQueryFns.getEdges(shape);
 	if (selectedEdges.length === 0) return require_errors.err(require_errors.validationError(require_errors.BrepErrorCode.FILLET_NO_EDGES, "No edges found for fillet", void 0, void 0, "Check that the shape has edges, or adjust your edge finder criteria"));
 	if (typeof radius === "function") {
-		const resolved = resolveEdgeCallback$1(selectedEdges, radius);
+		const resolved = resolveEdgeCallback$1(selectedEdges, radius, isFilletRadiusPair);
 		if (!resolved) return require_errors.err(require_errors.validationError(require_errors.BrepErrorCode.FILLET_NO_EDGES, "No edges with positive radius for fillet", void 0, void 0, "Check that the radius callback returns positive values"));
 		return require_errors.ok({
 			filteredEdges: resolved.edges,
@@ -594,6 +607,8 @@ function draft(shape, faces, pullDirection, neutralPlane, angle) {
 *
 * The radius varies along the edge according to the provided spec points.
 * Each point specifies a normalized parameter (0 = start, 1 = end) and radius.
+* A radius may be 0, so the fillet runs out to nothing there, as long as one
+* is positive.
 *
 * **Cross-kernel note:** occt-wasm and brepkit build a constant or linear
 * (start/end, <=2-point) profile and return `UNSUPPORTED_CAPABILITY` for one of
@@ -601,7 +616,7 @@ function draft(shape, faces, pullDirection, neutralPlane, angle) {
 */
 function variableFillet(shape, edge, radii) {
 	if (radii.length === 0) return require_errors.err(require_errors.validationError(require_errors.BrepErrorCode.VARIABLE_FILLET_FAILED, "radii must contain at least one radius spec"));
-	for (const r of radii) if (r.radius <= 0) return require_errors.err(require_errors.validationError(require_errors.BrepErrorCode.VARIABLE_FILLET_FAILED, "All radius values must be positive"));
+	if (radii.some((r) => r.radius < 0) || radii.every((r) => r.radius === 0)) return require_errors.err(require_errors.validationError(require_errors.BrepErrorCode.VARIABLE_FILLET_FAILED, "Radius values must not be negative, and one must be positive"));
 	const kernel = require_shapeTypes.getKernel();
 	try {
 		const spec = JSON.stringify({
@@ -1153,13 +1168,13 @@ function castToShape3D(shape, errorCode, errorMsg, suggestion) {
 	require_shapeTypes.disposeDowncastSource(shape, wrapped);
 	return require_errors.ok(wrapped);
 }
-function resolveEdgeCallback(selectedEdges, callbackFn) {
+function resolveEdgeCallback(selectedEdges, callbackFn, isValidPair = ([a, b]) => a > 0 && b > 0) {
 	const filteredEdges = [];
 	const hashToValue = /* @__PURE__ */ new Map();
 	for (const edge of selectedEdges) {
 		const val = callbackFn(edge) ?? 0;
 		if (typeof val === "number" && val <= 0) continue;
-		if (Array.isArray(val) && (val[0] <= 0 || val[1] <= 0)) continue;
+		if (Array.isArray(val) && !isValidPair(val)) continue;
 		filteredEdges.push(edge);
 		hashToValue.set(require_shapeTypes.getKernel().hashCode(edge.wrapped, require_constants.HASH_CODE_MAX), val);
 	}
@@ -1249,14 +1264,14 @@ function filletWithEvolution(shape, edges, radius) {
 	const check = validateNotNull(shape, "filletWithEvolution: shape");
 	if (require_errors.isErr(check)) return check;
 	if (typeof radius === "number" && radius <= 0) return require_errors.err(require_errors.validationError("INVALID_FILLET_RADIUS", "Fillet radius must be positive", void 0, void 0, "Provide a positive radius value greater than 0"));
-	if (Array.isArray(radius) && (radius[0] <= 0 || radius[1] <= 0)) return require_errors.err(require_errors.validationError("INVALID_FILLET_RADIUS", "Fillet radii must both be positive", void 0, void 0, "Both radius values must be greater than 0"));
+	if (Array.isArray(radius) && !isFilletRadiusPair(radius)) return require_errors.err(require_errors.validationError("INVALID_FILLET_RADIUS", FILLET_PAIR_MESSAGE, void 0, void 0, FILLET_PAIR_HINT));
 	const selectedEdges = edges ?? require_topologyQueryFns.getEdges(shape);
 	if (selectedEdges.length === 0) return require_errors.err(require_errors.validationError(require_errors.BrepErrorCode.FILLET_NO_EDGES, "No edges found for fillet", void 0, void 0, "Check that the shape has edges, or adjust your edge finder criteria"));
 	try {
 		let filteredEdges;
 		let kernelRadius;
 		if (typeof radius === "function") {
-			const resolved = resolveEdgeCallback(selectedEdges, radius);
+			const resolved = resolveEdgeCallback(selectedEdges, radius, isFilletRadiusPair);
 			if (!resolved) return require_errors.err(require_errors.validationError(require_errors.BrepErrorCode.FILLET_NO_EDGES, "No edges with positive radius for fillet", void 0, void 0, "Check that the radius callback returns positive values"));
 			filteredEdges = resolved.edges;
 			kernelRadius = resolved.kernelParam;

package/dist/{healingFns-CfkUEqcL.js → healingFns-w-PHd-Lj.js}

@@ -1,13 +1,13 @@
-import { C as isSolid, D as getShapeKind, T as isWire, Y as getKernelCapabilities, h as disposeResultShape, i as castShape, m as disposeDowncastSource, n as castResultShape, q as getKernel, r as castResultShapeWithKnownType, x as isShape3D, y as isFace } from "./shapeTypes-w2wyXEis.js";
-import { j as isUnsupportedKernelOperationError, n as faultyEdgeIndexesOf } from "./occtWasmAdapter-CGkZIHyM.js";
+import { C as isSolid, D as getShapeKind, T as isWire, Y as getKernelCapabilities, h as disposeResultShape, i as castShape, m as disposeDowncastSource, n as castResultShape, q as getKernel, r as castResultShapeWithKnownType, x as isShape3D, y as isFace } from "./shapeTypes-qhs8f2zx.js";
+import { j as isUnsupportedKernelOperationError, n as faultyEdgeIndexesOf } from "./occtWasmAdapter-DD_6IAVj.js";
 import { E as ok, b as isErr, d as validationError, g as err, i as kernelError, l as typeCastError, t as BrepErrorCode, u as unsupportedError, x as isOk } from "./errors-BTccWbtE.js";
-import { C as subShapeHashes, O as getSuggestionForCode, c as getFaces, i as getCachedIsValid, m as invalidateShapeCache, p as getWires, s as getEdges } from "./topologyQueryFns-CTl4cWYD.js";
+import { C as subShapeHashes, O as getSuggestionForCode, c as getFaces, i as getCachedIsValid, m as invalidateShapeCache, p as getWires, s as getEdges } from "./topologyQueryFns-CArmw9sE.js";
 import { n as HASH_CODE_MAX } from "./constants-iraOnb2p.js";
-import { y as downcast } from "./faceFns-BG1CBQUM.js";
-import { a as fuse, f as collectInputFaceHashes, h as propagateMetadataByHash, i as cutAll, m as propagateAllMetadata, n as copyAsBooleanResult, o as fuseAll, r as cut } from "./booleanFns-Dtg2jqzi.js";
-import { a as isSameShape } from "./shapeFns-BRRrZc1X.js";
+import { y as downcast } from "./faceFns-BNv6thpF.js";
+import { a as fuse, f as collectInputFaceHashes, h as propagateMetadataByHash, i as cutAll, m as propagateAllMetadata, n as copyAsBooleanResult, o as fuseAll, r as cut } from "./booleanFns-DIqS3nBK.js";
+import { a as isSameShape } from "./shapeFns-3NzCE2kz.js";
 import { t as firstOrThrow } from "./arrayAccess-BpgouNir.js";
-import { i as facesOfEdge } from "./adjacencyFns-C1Hxy0tk.js";
+import { i as facesOfEdge } from "./adjacencyFns-n6XWEyj1.js";
 // src/topology/threeHelpers.ts
 /**
 * Convert a ShapeMesh into BufferGeometry-compatible typed arrays.
@@ -213,28 +213,41 @@ function validateNotNull$1(shape, label) {
 	if (getKernel().isNull(shape.wrapped)) return err(validationError(BrepErrorCode.NULL_SHAPE_INPUT, `${label} is a null shape`));
 	return ok(void 0);
 }
+function isPositivePair([a, b]) {
+	return a > 0 && b > 0;
+}
 /**
-* Validate that a scalar or `[a, b]` pair is positive.
+* A fillet's start and end radius: one may be 0, so the fillet runs out to
+* nothing at that end of the edge, but not both, and neither below 0.
+*/
+function isFilletRadiusPair([start, end]) {
+	return start >= 0 && end >= 0 && (start > 0 || end > 0);
+}
+var FILLET_PAIR_MESSAGE = "Fillet radii must not be negative, and one must be positive";
+var FILLET_PAIR_HINT = "A radius may run to 0 at one end of the edge, but the other must be greater than 0";
+/**
+* Validate that a scalar is positive and that an `[a, b]` pair passes
+* `isValidPair` (both positive by default).
 * Returns an Err Result on failure, `undefined` on success.
 *
 * Function-type values (per-edge callbacks) are intentionally skipped here --
 * they are validated lazily in {@link resolveEdgeCallback} when each edge is processed.
 */
-function validatePositiveParam(value, msgs) {
+function validatePositiveParam(value, msgs, isValidPair = isPositivePair) {
 	if (typeof value === "number" && value <= 0) return err(validationError(msgs.code, msgs.scalar, void 0, void 0, msgs.scalarHint));
-	if (Array.isArray(value) && (value[0] <= 0 || value[1] <= 0)) return err(validationError(msgs.code, msgs.pair, void 0, void 0, msgs.pairHint));
+	if (Array.isArray(value) && !isValidPair(value)) return err(validationError(msgs.code, msgs.pair, void 0, void 0, msgs.pairHint));
 }
 /**
 * When the user supplies a per-edge callback, pre-filter edges and build a
 * hash-indexed lookup for the kernel. Returns `null` if no edges survive.
 */
-function resolveEdgeCallback$1(selectedEdges, callbackFn) {
+function resolveEdgeCallback$1(selectedEdges, callbackFn, isValidPair = isPositivePair) {
 	const filteredEdges = [];
 	const hashToValue = /* @__PURE__ */ new Map();
 	for (const edge of selectedEdges) {
 		const val = callbackFn(edge) ?? 0;
 		if (typeof val === "number" && val <= 0) continue;
-		if (Array.isArray(val) && (val[0] <= 0 || val[1] <= 0)) continue;
+		if (Array.isArray(val) && !isValidPair(val)) continue;
 		filteredEdges.push(edge);
 		hashToValue.set(getKernel().hashCode(edge.wrapped, HASH_CODE_MAX), val);
 	}
@@ -320,15 +333,15 @@ function normalizeFilletInputs(shape, edges, radius) {
 	const paramErr = validatePositiveParam(radius, {
 		code: "INVALID_FILLET_RADIUS",
 		scalar: "Fillet radius must be positive",
-		pair: "Fillet radii must both be positive",
+		pair: FILLET_PAIR_MESSAGE,
 		scalarHint: "Provide a positive radius value greater than 0",
-		pairHint: "Both radius values must be greater than 0"
-	});
+		pairHint: FILLET_PAIR_HINT
+	}, isFilletRadiusPair);
 	if (paramErr) return paramErr;
 	const selectedEdges = edges ?? getEdges(shape);
 	if (selectedEdges.length === 0) return err(validationError(BrepErrorCode.FILLET_NO_EDGES, "No edges found for fillet", void 0, void 0, "Check that the shape has edges, or adjust your edge finder criteria"));
 	if (typeof radius === "function") {
-		const resolved = resolveEdgeCallback$1(selectedEdges, radius);
+		const resolved = resolveEdgeCallback$1(selectedEdges, radius, isFilletRadiusPair);
 		if (!resolved) return err(validationError(BrepErrorCode.FILLET_NO_EDGES, "No edges with positive radius for fillet", void 0, void 0, "Check that the radius callback returns positive values"));
 		return ok({
 			filteredEdges: resolved.edges,
@@ -594,6 +607,8 @@ function draft(shape, faces, pullDirection, neutralPlane, angle) {
 *
 * The radius varies along the edge according to the provided spec points.
 * Each point specifies a normalized parameter (0 = start, 1 = end) and radius.
+* A radius may be 0, so the fillet runs out to nothing there, as long as one
+* is positive.
 *
 * **Cross-kernel note:** occt-wasm and brepkit build a constant or linear
 * (start/end, <=2-point) profile and return `UNSUPPORTED_CAPABILITY` for one of
@@ -601,7 +616,7 @@ function draft(shape, faces, pullDirection, neutralPlane, angle) {
 */
 function variableFillet(shape, edge, radii) {
 	if (radii.length === 0) return err(validationError(BrepErrorCode.VARIABLE_FILLET_FAILED, "radii must contain at least one radius spec"));
-	for (const r of radii) if (r.radius <= 0) return err(validationError(BrepErrorCode.VARIABLE_FILLET_FAILED, "All radius values must be positive"));
+	if (radii.some((r) => r.radius < 0) || radii.every((r) => r.radius === 0)) return err(validationError(BrepErrorCode.VARIABLE_FILLET_FAILED, "Radius values must not be negative, and one must be positive"));
 	const kernel = getKernel();
 	try {
 		const spec = JSON.stringify({
@@ -1153,13 +1168,13 @@ function castToShape3D(shape, errorCode, errorMsg, suggestion) {
 	disposeDowncastSource(shape, wrapped);
 	return ok(wrapped);
 }
-function resolveEdgeCallback(selectedEdges, callbackFn) {
+function resolveEdgeCallback(selectedEdges, callbackFn, isValidPair = ([a, b]) => a > 0 && b > 0) {
 	const filteredEdges = [];
 	const hashToValue = /* @__PURE__ */ new Map();
 	for (const edge of selectedEdges) {
 		const val = callbackFn(edge) ?? 0;
 		if (typeof val === "number" && val <= 0) continue;
-		if (Array.isArray(val) && (val[0] <= 0 || val[1] <= 0)) continue;
+		if (Array.isArray(val) && !isValidPair(val)) continue;
 		filteredEdges.push(edge);
 		hashToValue.set(getKernel().hashCode(edge.wrapped, HASH_CODE_MAX), val);
 	}
@@ -1249,14 +1264,14 @@ function filletWithEvolution(shape, edges, radius) {
 	const check = validateNotNull(shape, "filletWithEvolution: shape");
 	if (isErr(check)) return check;
 	if (typeof radius === "number" && radius <= 0) return err(validationError("INVALID_FILLET_RADIUS", "Fillet radius must be positive", void 0, void 0, "Provide a positive radius value greater than 0"));
-	if (Array.isArray(radius) && (radius[0] <= 0 || radius[1] <= 0)) return err(validationError("INVALID_FILLET_RADIUS", "Fillet radii must both be positive", void 0, void 0, "Both radius values must be greater than 0"));
+	if (Array.isArray(radius) && !isFilletRadiusPair(radius)) return err(validationError("INVALID_FILLET_RADIUS", FILLET_PAIR_MESSAGE, void 0, void 0, FILLET_PAIR_HINT));
 	const selectedEdges = edges ?? getEdges(shape);
 	if (selectedEdges.length === 0) return err(validationError(BrepErrorCode.FILLET_NO_EDGES, "No edges found for fillet", void 0, void 0, "Check that the shape has edges, or adjust your edge finder criteria"));
 	try {
 		let filteredEdges;
 		let kernelRadius;
 		if (typeof radius === "function") {
-			const resolved = resolveEdgeCallback(selectedEdges, radius);
+			const resolved = resolveEdgeCallback(selectedEdges, radius, isFilletRadiusPair);
 			if (!resolved) return err(validationError(BrepErrorCode.FILLET_NO_EDGES, "No edges with positive radius for fillet", void 0, void 0, "Check that the radius callback returns positive values"));
 			filteredEdges = resolved.edges;
 			kernelRadius = resolved.kernelParam;

package/dist/{helpers-6Emek9dE.cjs → helpers-CCnN8-PY.cjs}

@@ -1,12 +1,12 @@
-const require_shapeTypes = require("./shapeTypes-DEe6gtTR.cjs");
+const require_shapeTypes = require("./shapeTypes-CgayxMvX.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-I_m8o-s7.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-EI-aso9K.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
 const require_vecOps = require("./vecOps-CrGEPPQM.cjs");
-const require_faceFns = require("./faceFns-dj_c8LVc.cjs");
-const require_shapeFns = require("./shapeFns-CljM3iMI.cjs");
-const require_curveFns = require("./curveFns-QaNfJzko.cjs");
-const require_measureFns = require("./measureFns-FrNeGmXh.cjs");
+const require_faceFns = require("./faceFns-CPGJ_cx6.cjs");
+const require_shapeFns = require("./shapeFns-Cklw3p3S.cjs");
+const require_curveFns = require("./curveFns-m73YVbFb.cjs");
+const require_measureFns = require("./measureFns-CpoPgAZt.cjs");
 // src/utils/vec2d.ts
 /** Precision for curve intersection and parameter operations. */
 var PRECISION_INTERSECTION = 1e-9;

package/dist/{helpers-DolHn2_s.js → helpers-Ci_WZ5ou.js}

@@ -1,12 +1,12 @@
-import { q as getKernel, y as isFace } from "./shapeTypes-w2wyXEis.js";
+import { q as getKernel, y as isFace } from "./shapeTypes-qhs8f2zx.js";
 import { E as ok, g as err, o as queryError, x as isOk } from "./errors-BTccWbtE.js";
-import { c as getFaces, f as getVertices, p as getWires, s as getEdges } from "./topologyQueryFns-CTl4cWYD.js";
+import { c as getFaces, f as getVertices, p as getWires, s as getEdges } from "./topologyQueryFns-CArmw9sE.js";
 import { t as DEG2RAD } from "./constants-iraOnb2p.js";
 import { a as vecDot, d as vecNormalize } from "./vecOps-S-m9H_fe.js";
-import { l as normalAt, s as getSurfaceType } from "./faceFns-BG1CBQUM.js";
-import { a as isSameShape, n as getHashCode } from "./shapeFns-BRRrZc1X.js";
-import { f as getCurveType, i as curveIsClosed, o as curveLength } from "./curveFns-Dzgl3_MC.js";
-import { r as measureArea } from "./measureFns-WGYWWnQ1.js";
+import { l as normalAt, s as getSurfaceType } from "./faceFns-BNv6thpF.js";
+import { a as isSameShape, n as getHashCode } from "./shapeFns-3NzCE2kz.js";
+import { f as getCurveType, i as curveIsClosed, o as curveLength } from "./curveFns-CGQCy_D5.js";
+import { r as measureArea } from "./measureFns-MSr05_kf.js";
 // src/utils/vec2d.ts
 /** Precision for curve intersection and parameter operations. */
 var PRECISION_INTERSECTION = 1e-9;

package/dist/{importFns-D1AxkVC3.js → importFns-DQgcQQCb.js}

@@ -1,12 +1,12 @@
-import { C as isSolid, G as _usingCtx, S as isShell, _ as isCompound, n as castResultShape, q as getKernel } from "./shapeTypes-w2wyXEis.js";
+import { C as isSolid, G as _usingCtx, S as isShell, _ as isCompound, n as castResultShape, q as getKernel } from "./shapeTypes-qhs8f2zx.js";
 import { i as wasmIndex, r as vec3At$1 } from "./bug-ClMTAJhe.js";
 import { E as ok, g as err, r as ioError, t as BrepErrorCode } from "./errors-BTccWbtE.js";
-import { S as subShapeCount, c as getFaces, u as getShells } from "./topologyQueryFns-CTl4cWYD.js";
+import { S as subShapeCount, c as getFaces, u as getShells } from "./topologyQueryFns-CArmw9sE.js";
 import { n as HASH_CODE_MAX } from "./constants-iraOnb2p.js";
-import { t as makeCompound } from "./solidBuilders-BxIYXIv-.js";
-import { u as igesUnsupportedError } from "./meshFns-Lie8oAac.js";
+import { t as makeCompound } from "./solidBuilders-DhDGnOTQ.js";
+import { u as igesUnsupportedError } from "./meshFns-BIWD7IFN.js";
 import { n as getAtOrThrow } from "./arrayAccess-BpgouNir.js";
-import { c as make2dBezierCurve, h as make2dThreePointArc, p as make2dSegmentCurve, t as Blueprint } from "./blueprint-BzI6waZa.js";
+import { c as make2dBezierCurve, h as make2dThreePointArc, p as make2dSegmentCurve, t as Blueprint } from "./blueprint-2j8szIQ6.js";
 // src/io/objExportFns.ts
 /** Read a vec3 from a typed array at the given vertex index. */
 function vec3At(arr, i) {

package/dist/{importFns-CZb21dj7.cjs → importFns-zfbC3bIK.cjs}

@@ -1,12 +1,12 @@
-const require_shapeTypes = require("./shapeTypes-DEe6gtTR.cjs");
+const require_shapeTypes = require("./shapeTypes-CgayxMvX.cjs");
 const require_bug = require("./bug-CBcpIPuf.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-I_m8o-s7.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-EI-aso9K.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
-const require_solidBuilders = require("./solidBuilders-yQFZe6jf.cjs");
-const require_meshFns = require("./meshFns-Dy1a9wl_.cjs");
+const require_solidBuilders = require("./solidBuilders-BvIdZUkI.cjs");
+const require_meshFns = require("./meshFns-BxRKwY5z.cjs");
 const require_arrayAccess = require("./arrayAccess-DpJYARwv.cjs");
-const require_blueprint = require("./blueprint-DlpFhHbU.cjs");
+const require_blueprint = require("./blueprint-Cfj9EupK.cjs");
 // src/io/objExportFns.ts
 /** Read a vec3 from a typed array at the given vertex index. */
 function vec3At(arr, i) {

package/dist/io.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_meshFns = require("./meshFns-Dy1a9wl_.cjs");
-const require_importFns = require("./importFns-CZb21dj7.cjs");
+const require_meshFns = require("./meshFns-BxRKwY5z.cjs");
+const require_importFns = require("./importFns-zfbC3bIK.cjs");
 exports.blueprintToDXF = require_importFns.blueprintToDXF;
 exports.exportDXF = require_importFns.exportDXF;
 exports.exportGlb = require_importFns.exportGlb;

package/dist/io.js

@@ -1,3 +1,3 @@
-import { n as exportSTEP, r as exportSTL, t as exportIGES } from "./meshFns-Lie8oAac.js";
-import { a as exportSTEPConfigured, c as exportThreeMF, d as exportGlb, f as exportGltf, l as blueprintToDXF, n as importSTEP, o as importSVG, p as exportOBJ, r as importSTL, s as importSVGPathD, t as importIGES, u as exportDXF } from "./importFns-D1AxkVC3.js";
+import { n as exportSTEP, r as exportSTL, t as exportIGES } from "./meshFns-BIWD7IFN.js";
+import { a as exportSTEPConfigured, c as exportThreeMF, d as exportGlb, f as exportGltf, l as blueprintToDXF, n as importSTEP, o as importSVG, p as exportOBJ, r as importSTL, s as importSVGPathD, t as importIGES, u as exportDXF } from "./importFns-DQgcQQCb.js";
 export { blueprintToDXF, exportDXF, exportGlb, exportGltf, exportIGES, exportOBJ, exportSTEP, exportSTEPConfigured, exportSTL, exportThreeMF, importIGES, importSTEP, importSTL, importSVG, importSVGPathD };

package/dist/kernel/occtWasm/helpers.d.ts

@@ -28,13 +28,23 @@ export declare function multiplyMatrices4x4(a: number[], b: number[]): number[];
 /** A fillet's start and end radius, or a chamfer's two setbacks. A number is both. */
 type EdgeValue = number | [number, number];
 export type EdgeValueSpec = EdgeValue | ((edge: KernelShape) => EdgeValue);
+/** Per-edge values as parallel arrays, one entry per edge. */
+interface EdgeValues {
+    readonly first: number[];
+    readonly second: number[];
+}
+/**
+ * occt-wasm's fillet entry points take only positive radii, though its
+ * single-edge filletVariable builds a fillet that runs out to a radius of 0.
+ */
+export declare function refuseVanishingFilletRadius({ first, second }: EdgeValues): void;
 /**
  * Run a fillet or chamfer over `edges`, naming the edges it fails on. Edges
  * that all take one value go to `uniform`, the single-value entry point every
  * occt-wasm build has; otherwise `perEdge` gets each edge's pair as `first`
- * and `second`.
+ * and `second`. `check` sees the resolved values first and throws to refuse them.
  */
-export declare function runEdgeTreatment<T>(Module: OcctWasmModule, edges: KernelShape[], value: EdgeValueSpec, uniform: (edgeVec: EmVectorUint32, value: number) => T, perEdge: (edgeVec: EmVectorUint32, first: EmVectorDouble, second: EmVectorDouble) => T): T;
+export declare function runEdgeTreatment<T>(Module: OcctWasmModule, edges: KernelShape[], value: EdgeValueSpec, uniform: (edgeVec: EmVectorUint32, value: number) => T, perEdge: (edgeVec: EmVectorUint32, first: EmVectorDouble, second: EmVectorDouble) => T, check?: (values: EdgeValues) => void): T;
 /**
  * A per-edge chamfer's `referenceFaceIds`: empty when no edge names its
  * reference face, else one id per edge, 0 where the facade picks the face.

package/dist/kernel/occtWasm/occtWasmAdapter.cjs

@@ -1,3 +1,3 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_occtWasmAdapter = require("../../occtWasmAdapter-B9ZXx36v.cjs");
+const require_occtWasmAdapter = require("../../occtWasmAdapter-BH1JcAgl.cjs");
 exports.OcctWasmAdapter = require_occtWasmAdapter.OcctWasmAdapter;

package/dist/kernel/occtWasm/occtWasmAdapter.js

@@ -1 +1 @@
-export { t as OcctWasmAdapter } from "../../occtWasmAdapter-CGkZIHyM.js";
+export { t as OcctWasmAdapter } from "../../occtWasmAdapter-DD_6IAVj.js";

package/dist/{loftFns-BD0na-M4.cjs → loftFns-DQJM-35I.cjs}

@@ -1,5 +1,5 @@
-const require_shapeTypes = require("./shapeTypes-DEe6gtTR.cjs");
-const require_occtWasmAdapter = require("./occtWasmAdapter-B9ZXx36v.cjs");
+const require_shapeTypes = require("./shapeTypes-CgayxMvX.cjs");
+const require_occtWasmAdapter = require("./occtWasmAdapter-BH1JcAgl.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
 const require_types = require("./types-CjF9Rofr.cjs");
 const require_vecOps = require("./vecOps-CrGEPPQM.cjs");

package/dist/{loftFns-Cua-MamP.js → loftFns-mrTzIf4_.js}

@@ -1,5 +1,5 @@
-import { G as _usingCtx, T as isWire, h as disposeResultShape, n as castResultShape, q as getKernel, x as isShape3D } from "./shapeTypes-w2wyXEis.js";
-import { j as isUnsupportedKernelOperationError } from "./occtWasmAdapter-CGkZIHyM.js";
+import { G as _usingCtx, T as isWire, h as disposeResultShape, n as castResultShape, q as getKernel, x as isShape3D } from "./shapeTypes-qhs8f2zx.js";
+import { j as isUnsupportedKernelOperationError } from "./occtWasmAdapter-DD_6IAVj.js";
 import { E as ok, b as isErr, d as validationError, g as err, i as kernelError, l as typeCastError, t as BrepErrorCode, u as unsupportedError } from "./errors-BTccWbtE.js";
 import { r as toVec3 } from "./types-CKXsIm9-.js";
 import { c as vecLength, t as vecAdd } from "./vecOps-S-m9H_fe.js";

package/dist/{measureFns-FrNeGmXh.cjs → measureFns-CpoPgAZt.cjs}

@@ -1,8 +1,8 @@
-const require_shapeTypes = require("./shapeTypes-DEe6gtTR.cjs");
-const require_occtWasmAdapter = require("./occtWasmAdapter-B9ZXx36v.cjs");
+const require_shapeTypes = require("./shapeTypes-CgayxMvX.cjs");
+const require_occtWasmAdapter = require("./occtWasmAdapter-BH1JcAgl.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-I_m8o-s7.cjs");
-const require_faceFns = require("./faceFns-dj_c8LVc.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-EI-aso9K.cjs");
+const require_faceFns = require("./faceFns-CPGJ_cx6.cjs");
 // src/measurement/measureCache.ts
 var cache = /* @__PURE__ */ new WeakMap();
 function getCachedMeasurement(shape, key) {

package/dist/{measureFns-WGYWWnQ1.js → measureFns-MSr05_kf.js}

@@ -1,8 +1,8 @@
-import { q as getKernel } from "./shapeTypes-w2wyXEis.js";
-import { j as isUnsupportedKernelOperationError } from "./occtWasmAdapter-CGkZIHyM.js";
+import { q as getKernel } from "./shapeTypes-qhs8f2zx.js";
+import { j as isUnsupportedKernelOperationError } from "./occtWasmAdapter-DD_6IAVj.js";
 import { E as ok, d as validationError, g as err, t as BrepErrorCode, u as unsupportedError } from "./errors-BTccWbtE.js";
-import { E as kernelCallRaw } from "./topologyQueryFns-CTl4cWYD.js";
-import { m as uvBounds } from "./faceFns-BG1CBQUM.js";
+import { E as kernelCallRaw } from "./topologyQueryFns-CArmw9sE.js";
+import { m as uvBounds } from "./faceFns-BNv6thpF.js";
 // src/measurement/measureCache.ts
 var cache = /* @__PURE__ */ new WeakMap();
 function getCachedMeasurement(shape, key) {

package/dist/measurement.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_measureFns = require("./measureFns-FrNeGmXh.cjs");
-const require_principalBoxFns = require("./principalBoxFns-3ZURcOFP.cjs");
+const require_measureFns = require("./measureFns-CpoPgAZt.cjs");
+const require_principalBoxFns = require("./principalBoxFns-CNSK-z3k.cjs");
 exports.createDistanceQuery = require_measureFns.createDistanceQuery;
 exports.measureArea = require_measureFns.measureArea;
 exports.measureDistance = require_measureFns.measureDistance;

package/dist/measurement.js

@@ -1,3 +1,3 @@
-import { c as measureLength, d as measureVolume, f as measureVolumeProps, l as measureLinearProps, o as measureDistance, r as measureArea, s as measureDistanceProps, t as createDistanceQuery, u as measureSurfaceProps } from "./measureFns-WGYWWnQ1.js";
-import { t as principalBoundingBox } from "./principalBoxFns-CjfJnZfH.js";
+import { c as measureLength, d as measureVolume, f as measureVolumeProps, l as measureLinearProps, o as measureDistance, r as measureArea, s as measureDistanceProps, t as createDistanceQuery, u as measureSurfaceProps } from "./measureFns-MSr05_kf.js";
+import { t as principalBoundingBox } from "./principalBoxFns-CBWLch1h.js";
 export { createDistanceQuery, measureArea, measureDistance, measureDistanceProps, measureLength, measureLinearProps, measureSurfaceProps, measureVolume, measureVolumeProps, principalBoundingBox };

package/dist/{meshFns-Lie8oAac.js → meshFns-BIWD7IFN.js}

@@ -1,8 +1,8 @@
-import { q as getKernel, ut as qualityDeflection } from "./shapeTypes-w2wyXEis.js";
-import { j as isUnsupportedKernelOperationError } from "./occtWasmAdapter-CGkZIHyM.js";
+import { q as getKernel, ut as qualityDeflection } from "./shapeTypes-qhs8f2zx.js";
+import { j as isUnsupportedKernelOperationError } from "./occtWasmAdapter-DD_6IAVj.js";
 import { E as ok, g as err, r as ioError, t as BrepErrorCode, u as unsupportedError } from "./errors-BTccWbtE.js";
-import { d as getSolids, n as getBounds } from "./topologyQueryFns-CTl4cWYD.js";
-import { d as getFaceOrigins } from "./solidBuilders-BxIYXIv-.js";
+import { d as getSolids, n as getBounds } from "./topologyQueryFns-CArmw9sE.js";
+import { d as getFaceOrigins } from "./solidBuilders-DhDGnOTQ.js";
 // src/topology/meshCache.ts
 /**
 * Build a parameter key for the inner cache map (excludes shape identity).

package/dist/{meshFns-Dy1a9wl_.cjs → meshFns-BxRKwY5z.cjs}

@@ -1,8 +1,8 @@
-const require_shapeTypes = require("./shapeTypes-DEe6gtTR.cjs");
-const require_occtWasmAdapter = require("./occtWasmAdapter-B9ZXx36v.cjs");
+const require_shapeTypes = require("./shapeTypes-CgayxMvX.cjs");
+const require_occtWasmAdapter = require("./occtWasmAdapter-BH1JcAgl.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-I_m8o-s7.cjs");
-const require_solidBuilders = require("./solidBuilders-yQFZe6jf.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-EI-aso9K.cjs");
+const require_solidBuilders = require("./solidBuilders-BvIdZUkI.cjs");
 // src/topology/meshCache.ts
 /**
 * Build a parameter key for the inner cache map (excludes shape identity).

package/dist/{occtWasmAdapter-B9ZXx36v.cjs → occtWasmAdapter-BH1JcAgl.cjs}

@@ -2313,6 +2313,13 @@ function resolveEdgeValues(edges, value) {
 		second
 	};
 }
+/**
+* occt-wasm's fillet entry points take only positive radii, though its
+* single-edge filletVariable builds a fillet that runs out to a radius of 0.
+*/
+function refuseVanishingFilletRadius({ first, second }) {
+	if (first.includes(0) || second.includes(0)) throw new UnsupportedKernelOperationError("occt-wasm: a fillet radius that runs to 0 is built only by variableFillet");
+}
 /** The value every edge takes on both sides, or `undefined` when they differ. */
 function uniformEdgeValue({ first, second }) {
 	const [value] = first;
@@ -2323,10 +2330,11 @@ function uniformEdgeValue({ first, second }) {
 * Run a fillet or chamfer over `edges`, naming the edges it fails on. Edges
 * that all take one value go to `uniform`, the single-value entry point every
 * occt-wasm build has; otherwise `perEdge` gets each edge's pair as `first`
-* and `second`.
+* and `second`. `check` sees the resolved values first and throws to refuse them.
 */
-function runEdgeTreatment(Module, edges, value, uniform, perEdge) {
+function runEdgeTreatment(Module, edges, value, uniform, perEdge, check) {
 	const values = resolveEdgeValues(edges, value);
+	check?.(values);
 	const shared = uniformEdgeValue(values);
 	const edgeVec = makeVecU32(Module, edges.map(unwrap));
 	try {
@@ -3813,7 +3821,7 @@ function fillet(k, Module, shape, edges, radius) {
 	return wrapResult(k, runEdgeTreatment(Module, edges, radius, (edgeVec, r) => k.fillet(id, edgeVec, r), (edgeVec, startRadii, endRadii) => {
 		if (!k.filletRadii) throw needsOcctWasm59("per-edge or tapered fillet radii");
 		return k.filletRadii(id, edgeVec, startRadii, endRadii);
-	}));
+	}, refuseVanishingFilletRadius));
 }
 function chamfer(k, Module, shape, edges, distance) {
 	const id = unwrap(shape);
@@ -6259,7 +6267,7 @@ function filletWithHistory(k, Module, shape, edges, radius, inputFaceHashes, has
 		const { id, evolution } = parseEvolution(runEdgeTreatment(Module, edges, radius, (edgeVec, r) => k.filletWithHistory(shapeId, edgeVec, r, hashVec, hashUpperBound), (edgeVec, startRadii, endRadii) => {
 			if (!k.filletRadiiWithHistory) throw needsOcctWasm59("per-edge or tapered fillet radii");
 			return k.filletRadiiWithHistory(shapeId, edgeVec, startRadii, endRadii, hashVec, hashUpperBound);
-		}));
+		}, refuseVanishingFilletRadius));
 		return {
 			shape: wrapResult(k, id),
 			evolution