bmad-studio 0.1.0 → 1.0.0

package/_bmad/tea/workflows/testarch/bmad-testarch-test-design/checklist.md

@@ -1,464 +0,0 @@
-# Test Design and Risk Assessment - Validation Checklist
-
-## Prerequisites (Mode-Dependent)
-
-**System-Level Mode (Phase 3):**
-
-- [ ] PRD exists with functional and non-functional requirements
-- [ ] ADR (Architecture Decision Record) exists
-- [ ] Architecture document available (architecture.md or tech-spec)
-- [ ] Requirements are testable and unambiguous
-
-**Epic-Level Mode (Phase 4):**
-
-- [ ] Story markdown with clear acceptance criteria exists
-- [ ] PRD or epic documentation available
-- [ ] Architecture documents available (test-design-architecture.md + test-design-qa.md from Phase 3, if exists)
-- [ ] Requirements are testable and unambiguous
-
-## Process Steps
-
-### Step 1: Context Loading
-
-- [ ] PRD.md read and requirements extracted
-- [ ] Epics.md or specific epic documentation loaded
-- [ ] Story markdown with acceptance criteria analyzed
-- [ ] Architecture documents reviewed (if available)
-- [ ] Existing test coverage analyzed
-- [ ] Knowledge base fragments loaded (risk-governance, probability-impact, test-levels, test-priorities)
-
-### Step 2: Risk Assessment
-
-- [ ] Genuine risks identified (not just features)
-- [ ] Risks classified by category (TECH/SEC/PERF/DATA/BUS/OPS)
-- [ ] Probability scored (1-3 for each risk)
-- [ ] Impact scored (1-3 for each risk)
-- [ ] Risk scores calculated (probability × impact)
-- [ ] High-priority risks (score ≥6) flagged
-- [ ] Mitigation plans defined for high-priority risks
-- [ ] Owners assigned for each mitigation
-- [ ] Timelines set for mitigations
-- [ ] Residual risk documented
-
-### Step 3: Coverage Design
-
-- [ ] Acceptance criteria broken into atomic scenarios
-- [ ] Test levels selected (E2E/API/Component/Unit)
-- [ ] No duplicate coverage across levels
-- [ ] Priority levels assigned (P0/P1/P2/P3)
-- [ ] P0 scenarios meet strict criteria (blocks core + high risk + no workaround)
-- [ ] Data prerequisites identified
-- [ ] Tooling/access requirements documented when applicable
-- [ ] Execution order defined (smoke → P0 → P1 → P2/P3)
-
-### Step 4: Deliverables Generation
-
-- [ ] Risk assessment matrix created
-- [ ] Coverage matrix created
-- [ ] Execution order documented
-- [ ] Resource estimates calculated
-- [ ] Quality gate criteria defined
-- [ ] Output file written to correct location
-- [ ] Output file uses template structure
-
-## Output Validation
-
-### Risk Assessment Matrix
-
-- [ ] All risks have unique IDs (R-001, R-002, etc.)
-- [ ] Each risk has category assigned
-- [ ] Probability values are 1, 2, or 3
-- [ ] Impact values are 1, 2, or 3
-- [ ] Scores calculated correctly (P × I)
-- [ ] High-priority risks (≥6) clearly marked
-- [ ] Mitigation strategies specific and actionable
-
-### Coverage Matrix
-
-- [ ] All requirements mapped to test levels
-- [ ] Priorities assigned to all scenarios
-- [ ] Risk linkage documented
-- [ ] Test counts realistic
-- [ ] Owners assigned where applicable
-- [ ] No duplicate coverage (same behavior at multiple levels)
-
-### Execution Strategy
-
-**CRITICAL: Keep execution strategy simple, avoid redundancy**
-
-- [ ] **Simple structure**: PR / Nightly / Weekly (NOT complex smoke/P0/P1/P2 tiers)
-- [ ] **PR execution**: All functional tests unless significant infrastructure overhead
-- [ ] **Nightly/Weekly**: Only performance, chaos, long-running, manual tests
-- [ ] **No redundancy**: Don't re-list all tests (already in coverage plan)
-- [ ] **Philosophy stated**: "Run everything in PRs if <15 min, defer only if expensive/long"
-- [ ] **Playwright parallelization noted**: 100s of tests in 10-15 min
-
-### Resource Estimates
-
-**CRITICAL: Use intervals/ranges, NOT exact numbers**
-
-- [ ] P0 effort provided as interval range (e.g., "~25-40 hours" NOT "36 hours")
-- [ ] P1 effort provided as interval range (e.g., "~20-35 hours" NOT "27 hours")
-- [ ] P2 effort provided as interval range (e.g., "~10-30 hours" NOT "15.5 hours")
-- [ ] P3 effort provided as interval range (e.g., "~2-5 hours" NOT "2.5 hours")
-- [ ] Total effort provided as interval range (e.g., "~55-110 hours" NOT "81 hours")
-- [ ] Timeline provided as week range (e.g., "~1.5-3 weeks" NOT "11 days")
-- [ ] Estimates include setup time and account for complexity variations
-- [ ] **No false precision**: Avoid exact calculations like "18 tests × 2 hours = 36 hours"
-
-### Quality Gate Criteria
-
-- [ ] P0 pass rate threshold defined (should be 100%)
-- [ ] P1 pass rate threshold defined (typically ≥95%)
-- [ ] High-risk mitigation completion required
-- [ ] Coverage targets specified (≥80% recommended)
-
-## Quality Checks
-
-### Evidence-Based Assessment
-
-- [ ] Risk assessment based on documented evidence
-- [ ] No speculation on business impact
-- [ ] Assumptions clearly documented
-- [ ] Clarifications requested where needed
-- [ ] Historical data referenced where available
-
-### Risk Classification Accuracy
-
-- [ ] TECH risks are architecture/integration issues
-- [ ] SEC risks are security vulnerabilities
-- [ ] PERF risks are performance/scalability concerns
-- [ ] DATA risks are data integrity issues
-- [ ] BUS risks are business/revenue impacts
-- [ ] OPS risks are deployment/operational issues
-
-### Priority Assignment Accuracy
-
-**CRITICAL: Priority classification is separate from execution timing**
-
-- [ ] **Priority sections (P0/P1/P2/P3) do NOT include execution context** (e.g., no "Run on every commit" in headers)
-- [ ] **Priority sections have only "Criteria" and "Purpose"** (no "Execution:" field)
-- [ ] **Execution Strategy section** is separate and handles timing based on infrastructure overhead
-- [ ] P0: Truly blocks core functionality + High-risk (≥6) + No workaround
-- [ ] P1: Important features + Medium-risk (3-4) + Common workflows
-- [ ] P2: Secondary features + Low-risk (1-2) + Edge cases
-- [ ] P3: Nice-to-have + Exploratory + Benchmarks
-- [ ] **Note at top of Test Coverage Plan**: Clarifies P0/P1/P2/P3 = priority/risk, NOT execution timing
-
-### Test Level Selection
-
-- [ ] E2E used only for critical paths
-- [ ] API tests cover complex business logic
-- [ ] Component tests for UI interactions
-- [ ] Unit tests for edge cases and algorithms
-- [ ] No redundant coverage
-
-## Integration Points
-
-### Knowledge Base Integration
-
-- [ ] risk-governance.md consulted
-- [ ] probability-impact.md applied
-- [ ] test-levels-framework.md referenced
-- [ ] test-priorities-matrix.md used
-- [ ] Additional fragments loaded as needed
-
-### Status File Integration
-
-- [ ] Test design logged in Quality & Testing Progress
-- [ ] Epic number and scope documented
-- [ ] Completion timestamp recorded
-
-### Workflow Dependencies
-
-- [ ] Can proceed to `*atdd` workflow with P0 scenarios
-- [ ] `*atdd` is a separate workflow and must be run explicitly (not auto-run)
-- [ ] Can proceed to `automate` workflow with full coverage plan
-- [ ] Risk assessment informs `gate` workflow criteria
-- [ ] Integrates with `ci` workflow execution order
-
-## Accountability & Logistics
-
-### Not in Scope
-
-- [ ] Out-of-scope items explicitly listed with reasoning
-- [ ] Mitigation noted for each excluded item
-- [ ] Exclusions reviewed and accepted by stakeholders
-
-### Entry Criteria
-
-- [ ] Prerequisites for testing start are clearly defined
-- [ ] Environment readiness included
-- [ ] Test data readiness included
-- [ ] Pre-implementation blocker resolution referenced
-
-### Exit Criteria
-
-- [ ] Pass/fail thresholds defined for each priority level
-- [ ] Bug severity gate defined (e.g., no open P0/P1 bugs)
-- [ ] Coverage sufficiency criteria specified
-
-### Project Team (Optional)
-
-- [ ] If included, key roles identified (QA Lead, Dev Lead, PM, Architect minimum)
-- [ ] If included, testing responsibilities mapped to roles
-- [ ] If included, names populated where available (placeholders acceptable for draft)
-
-### Tooling & Access (System-Level Only, If Applicable)
-
-- [ ] If non-standard tools or access requests exist, list them
-- [ ] Access requirements identified for each tool/service
-- [ ] Status tracked (Ready/Pending) when applicable
-
-### Interworking & Regression
-
-- [ ] Impacted services/components identified
-- [ ] Regression scope defined per impacted service
-- [ ] Cross-team coordination noted where needed
-
-## System-Level Mode: Two-Document Validation
-
-**When in system-level mode (PRD + ADR input), validate BOTH documents:**
-
-### test-design-architecture.md
-
-- [ ] **Purpose statement** at top (serves as contract with Architecture team)
-- [ ] **Executive Summary** with scope, business context, architecture decisions, risk summary
-- [ ] **Quick Guide** section with three tiers:
-  - [ ] 🚨 BLOCKERS - Team Must Decide (pre-implementation critical path items)
-  - [ ] ⚠️ HIGH PRIORITY - Team Should Validate (recommendations for approval)
-  - [ ] 📋 INFO ONLY - Solutions Provided (no decisions needed)
-- [ ] **Risk Assessment** section - **ACTIONABLE**
-  - [ ] Total risks identified count
-  - [ ] High-priority risks table (score ≥6) with all columns: Risk ID, Category, Description, Probability, Impact, Score, Mitigation, Owner, Timeline
-  - [ ] Medium and low-priority risks tables
-  - [ ] Risk category legend included
-- [ ] **Testability Concerns and Architectural Gaps** section - **ACTIONABLE**
-  - [ ] **Sub-section: 🚨 ACTIONABLE CONCERNS** at TOP
-    - [ ] Blockers to Fast Feedback table (WHAT architecture must provide)
-    - [ ] Architectural Improvements Needed (WHAT must be changed)
-    - [ ] Each concern has: Owner, Timeline, Impact
-  - [ ] **Sub-section: Testability Assessment Summary** at BOTTOM (FYI)
-    - [ ] What Works Well (passing items)
-    - [ ] Accepted Trade-offs (no action required)
-    - [ ] This section only included if worth mentioning; otherwise omitted
-- [ ] **Risk Mitigation Plans** for all high-priority risks (≥6)
-  - [ ] Each plan has: Strategy (numbered steps), Owner, Timeline, Status, Verification
-  - [ ] **Only Backend/DevOps/Arch/Security mitigations** (production code changes)
-  - [ ] QA-owned mitigations belong in QA doc instead
-- [ ] **Assumptions and Dependencies** section
-  - [ ] **Architectural assumptions only** (SLO targets, replication lag, system design)
-  - [ ] Assumptions list (numbered)
-  - [ ] Dependencies list with required dates
-  - [ ] Risks to plan with impact and contingency
-  - [ ] QA execution assumptions belong in QA doc instead
-- [ ] **NO test implementation code** (long examples belong in QA doc)
-- [ ] **NO test scripts** (no Playwright test(...) blocks, no assertions, no test setup code)
-- [ ] **NO NFR test examples** (NFR sections describe WHAT to test, not HOW to test)
-- [ ] **NO test scenario checklists** (belong in QA doc)
-- [ ] **NO bloat or repetition** (consolidate repeated notes, avoid over-explanation)
-- [ ] **Cross-references to QA doc** where appropriate (instead of duplication)
-- [ ] **RECIPE SECTIONS NOT IN ARCHITECTURE DOC:**
-  - [ ] NO "Test Levels Strategy" section (unit/integration/E2E split belongs in QA doc only)
-  - [ ] NO "NFR Testing Approach" section with detailed test procedures (belongs in QA doc only)
-  - [ ] NO "Test Environment Requirements" section (belongs in QA doc only)
-  - [ ] NO "Recommendations for pre-implementation" section with test framework setup (belongs in QA doc only)
-  - [ ] NO "Quality Gate Criteria" section (pass rates, coverage targets belong in QA doc only)
-  - [ ] NO "Tool Selection" section (Playwright, k6, etc. belongs in QA doc only)
-
-### test-design-qa.md
-
-**REQUIRED SECTIONS:**
-
-- [ ] **Purpose statement** at top (test execution recipe)
-- [ ] **Executive Summary** with risk summary and coverage summary
-- [ ] **Dependencies & Test Blockers** section appears near the top (immediately after Executive Summary, or after Not in Scope)
-  - [ ] Backend/Architecture dependencies listed (what QA needs from other teams)
-  - [ ] QA infrastructure setup listed (factories, fixtures, environments)
-  - [ ] Code example with playwright-utils if config.tea_use_playwright_utils is true
-  - [ ] Test from '@seontechnologies/playwright-utils/api-request/fixtures'
-  - [ ] Expect from '@playwright/test' (playwright-utils does not re-export expect)
-  - [ ] Code examples include assertions (no unused imports)
-- [ ] **Risk Assessment** section (brief, references Architecture doc)
-  - [ ] High-priority risks table
-  - [ ] Medium/low-priority risks table
-  - [ ] Each risk shows "QA Test Coverage" column (how QA validates)
-- [ ] **Test Coverage Plan** with P0/P1/P2/P3 sections
-  - [ ] Priority sections have ONLY "Criteria" (no execution context)
-  - [ ] Note at top: "P0/P1/P2/P3 = priority, NOT execution timing"
-  - [ ] Test tables with columns: Test ID | Requirement | Test Level | Risk Link | Notes
-- [ ] **Execution Strategy** section (organized by TOOL TYPE)
-  - [ ] Every PR: Playwright tests (~10-15 min)
-  - [ ] Nightly: k6 performance tests (~30-60 min)
-  - [ ] Weekly: Chaos & long-running (~hours)
-  - [ ] Philosophy: "Run everything in PRs unless expensive/long-running"
-- [ ] **QA Effort Estimate** section (QA effort ONLY)
-  - [ ] Interval-based estimates (e.g., "~1-2 weeks" NOT "36 hours")
-  - [ ] NO DevOps, Backend, Data Eng, Finance effort
-  - [ ] No per-milestone effort breakdowns in this section
-- [ ] **Implementation Planning Handoff** section (optional)
-  - [ ] Only include if implementation tasks must be scheduled
-  - [ ] Owners assigned (QA/Dev/Platform/etc)
-  - [ ] Target milestone may be noted, but avoid detailed per-milestone breakdowns
-- [ ] **Appendix A: Code Examples & Tagging**
-- [ ] **Appendix B: Knowledge Base References**
-
-**DON'T INCLUDE (bloat):**
-
-- [ ] ❌ NO Quick Reference section
-- [ ] ❌ NO System Architecture Summary
-- [ ] ❌ NO Test Environment Requirements as separate section (integrate into Dependencies)
-- [ ] ❌ NO Testability Assessment section (covered in Dependencies)
-- [ ] ❌ NO Test Levels Strategy section (obvious from test scenarios)
-- [ ] ❌ NO NFR Readiness Summary
-- [ ] ❌ NO Quality Gate Criteria section (teams decide for themselves)
-- [ ] ❌ NO Follow-on Workflows section (BMAD commands self-explanatory)
-- [ ] ❌ NO Approval section
-- [ ] ❌ NO Infrastructure/DevOps/Finance effort tables (out of scope)
-- [ ] ❌ NO detailed milestone-by-milestone breakdown tables (use Implementation Planning Handoff if needed)
-- [ ] ❌ NO generic Next Steps section (use Implementation Planning Handoff if needed)
-
-### Cross-Document Consistency
-
-- [ ] Both documents reference same risks by ID (R-001, R-002, etc.)
-- [ ] Both documents use consistent priority levels (P0, P1, P2, P3)
-- [ ] Both documents reference same pre-implementation blockers
-- [ ] No duplicate content (cross-reference instead)
-- [ ] Dates and authors match across documents
-- [ ] ADR and PRD references consistent
-
-### Document Quality (Anti-Bloat Check)
-
-**CRITICAL: Check for bloat and repetition across BOTH documents**
-
-- [ ] **No repeated notes 10+ times** (e.g., "Timing is pessimistic until R-005 fixed" on every section)
-- [ ] **Repeated information consolidated** (write once at top, reference briefly if needed)
-- [ ] **No excessive detail** that doesn't add value (obvious concepts, redundant examples)
-- [ ] **Focus on unique/critical info** (only document what's different from standard practice)
-- [ ] **Architecture doc**: Concerns-focused, NOT implementation-focused
-- [ ] **QA doc**: Implementation-focused, NOT theory-focused
-- [ ] **Clear separation**: Architecture = WHAT and WHY, QA = HOW
-- [ ] **Professional tone**: No AI slop markers
-  - [ ] Avoid excessive ✅/❌ emojis (use sparingly, only when adding clarity)
-  - [ ] Avoid "absolutely", "excellent", "fantastic", overly enthusiastic language
-  - [ ] Write professionally and directly
-- [ ] **Architecture doc length**: Target ~150-200 lines max (focus on actionable concerns only)
-- [ ] **QA doc length**: Keep concise, remove bloat sections
-
-### Architecture Doc Structure (Actionable-First Principle)
-
-**CRITICAL: Validate structure follows actionable-first, FYI-last principle**
-
-- [ ] **Actionable sections at TOP:**
-  - [ ] Quick Guide (🚨 BLOCKERS first, then ⚠️ HIGH PRIORITY, then 📋 INFO ONLY last)
-  - [ ] Risk Assessment (high-priority risks ≥6 at top)
-  - [ ] Testability Concerns (concerns/blockers at top, passing items at bottom)
-  - [ ] Risk Mitigation Plans (for high-priority risks ≥6)
-- [ ] **FYI sections at BOTTOM:**
-  - [ ] Testability Assessment Summary (what works well - only if worth mentioning)
-  - [ ] Assumptions and Dependencies
-- [ ] **ASRs categorized correctly:**
-  - [ ] Actionable ASRs included in 🚨 or ⚠️ sections
-  - [ ] FYI ASRs included in 📋 section or omitted if obvious
-
-## BMAD Handoff Validation (System-Level Mode Only)
-
-- [ ] Handoff document generated at `{test_artifacts}/test-design/{project_name}-handoff.md`
-- [ ] TEA Artifacts Inventory table populated with actual paths
-- [ ] Epic-Level Integration Guidance populated with P0/P1 risks
-- [ ] Story-Level Integration Guidance populated with critical test scenarios
-- [ ] Risk-to-Story Mapping table populated from risk register
-- [ ] Recommended workflow sequence is accurate
-- [ ] Phase transition quality gates are defined
-
-## Completion Criteria
-
-**All must be true:**
-
-- [ ] All prerequisites met
-- [ ] All process steps completed
-- [ ] All output validations passed
-- [ ] All quality checks passed
-- [ ] All integration points verified
-- [ ] Output file(s) complete and well-formatted
-- [ ] **System-level mode:** Both documents validated (if applicable)
-- [ ] **System-level mode:** Handoff document validated (if applicable)
-- [ ] **Epic-level mode:** Single document validated (if applicable)
-- [ ] Team review scheduled (if required)
-
-## Post-Workflow Actions
-
-**User must complete:**
-
-1. [ ] Review risk assessment with team
-2. [ ] Prioritize mitigation for high-priority risks (score ≥6)
-3. [ ] Allocate resources per estimates
-4. [ ] Run `*atdd` workflow to generate P0 tests (separate workflow; not auto-run)
-5. [ ] Set up test data factories and fixtures
-6. [ ] Schedule team review of test design document
-
-**Recommended next workflows:**
-
-1. [ ] Run `atdd` workflow for P0 test generation
-2. [ ] Run `framework` workflow if not already done
-3. [ ] Run `ci` workflow to configure pipeline stages
-
-## Rollback Procedure
-
-If workflow fails:
-
-1. [ ] Delete output file
-2. [ ] Review error logs
-3. [ ] Fix missing context (PRD, architecture docs)
-4. [ ] Clarify ambiguous requirements
-5. [ ] Retry workflow
-
-## Notes
-
-### Common Issues
-
-**Issue**: Too many P0 tests
-
-- **Solution**: Apply strict P0 criteria - must block core AND high risk AND no workaround
-
-**Issue**: Risk scores all high
-
-- **Solution**: Differentiate between high-impact (3) and degraded (2) impacts
-
-**Issue**: Duplicate coverage across levels
-
-- **Solution**: Use test pyramid - E2E for critical paths only
-
-**Issue**: Resource estimates too high or too precise
-
-- **Solution**:
-  - Invest in fixtures/factories to reduce per-test setup time
-  - Use interval ranges (e.g., "~55-110 hours") instead of exact numbers (e.g., "81 hours")
-  - Widen intervals if high uncertainty exists
-
-**Issue**: Execution order section too complex or redundant
-
-- **Solution**:
-  - Default: Run everything in PRs (<15 min with Playwright parallelization)
-  - Only defer to nightly/weekly if expensive (k6, chaos, 4+ hour tests)
-  - Don't create smoke/P0/P1/P2/P3 tier structure
-  - Don't re-list all tests (already in coverage plan)
-
-### Best Practices
-
-- Base risk assessment on evidence, not assumptions
-- High-priority risks (≥6) require immediate mitigation
-- P0 tests should cover <10% of total scenarios
-- Avoid testing same behavior at multiple levels
-- **Use interval-based estimates** (e.g., "~25-40 hours") instead of exact numbers to avoid false precision and provide flexibility
-- **Keep execution strategy simple**: Default to "run everything in PRs" (<15 min with Playwright), only defer if expensive/long-running
-- **Avoid execution order redundancy**: Don't create complex tier structures or re-list tests
-
----
-
-**Checklist Complete**: Sign off when all items validated.
-
-**Completed by:** {name}
-**Date:** {date}
-**Epic:** {epic title}
-**Notes:** {additional notes}

package/_bmad/tea/workflows/testarch/bmad-testarch-test-design/instructions.md

@@ -1,105 +0,0 @@
-<!-- Powered by BMAD-CORE™ -->
-
-# Test Design and Risk Assessment
-
-**Workflow ID**: `_bmad/tea/testarch/bmad-testarch-test-design`
-**Version**: 5.0 (Step-File Architecture)
-
----
-
-## Overview
-
-Plans comprehensive test coverage strategy with risk assessment, priority classification, and execution ordering. This workflow operates in **two modes**:
-
-- **System-Level Mode (Phase 3)**: Testability review of architecture before solutioning gate check
-- **Epic-Level Mode (Phase 4)**: Per-epic test planning with risk assessment
-
-The workflow auto-detects which mode to use based on project phase and user intent.
-
----
-
-## WORKFLOW ARCHITECTURE
-
-This workflow uses **step-file architecture** for disciplined execution:
-
-### Core Principles
-
-- **Micro-file Design**: Each step is a self-contained instruction file
-- **Just-In-Time Loading**: Only the current step file is in memory
-- **Sequential Enforcement**: Execute steps in order without skipping
-- **State Tracking**: Write outputs only when instructed, then proceed
-
-### Step Processing Rules (Non-Negotiable)
-
-1. **READ COMPLETELY**: Read the entire step file before taking any action
-2. **FOLLOW SEQUENCE**: Execute all numbered sections in order
-3. **WAIT FOR INPUT**: Halt when user input is required
-4. **LOAD NEXT**: Only load the next step file when directed
-
----
-
-## INITIALIZATION SEQUENCE
-
-### 1. Configuration Loading
-
-From `workflow.yaml`, resolve:
-
-- `config_source`, `test_artifacts`, `user_name`, `communication_language`, `document_output_language`, `date`
-
-### 2. First Step
-
-Load, read completely, and execute:
-`./steps-c/step-01-detect-mode.md`
-
-### 3. Resume Support
-
-If the user selects **Resume** mode, load, read completely, and execute:
-`./steps-c/step-01b-resume.md`
-
-This checks the output document for progress tracking frontmatter and routes to the next incomplete step.
-
----
-
-## OUTPUT GENERATION GUIDANCE
-
-When populating templates in step 5, apply the following guidance for these sections:
-
-### Not in Scope
-
-- Identify components, third-party services, or subsystems NOT covered by this test plan
-- For each excluded item, provide reasoning (why excluded) and mitigation (how risk is addressed elsewhere)
-- Common exclusions: external vendor APIs tested by upstream teams, legacy modules outside the current phase scope, infrastructure already covered by platform team monitoring
-
-### Entry and Exit Criteria
-
-- **Entry criteria**: Derive from Dependencies and Test Blockers -- what must be resolved before QA can start testing
-- **Exit criteria**: Derive from Quality Gate Criteria -- what constitutes "done" for the testing phase
-- Include project-specific criteria based on context (e.g., "feature flag enabled in staging", "seed data loaded", "pre-implementation blockers resolved")
-
-### Project Team (Optional)
-
-- Include only if roles/names are known or responsibility mapping is needed
-- Extract names and roles from PRD, ADR, or project context if available
-- If names are unknown, either omit or use role placeholders for drafts
-- Map testing responsibilities to each role (e.g., who owns E2E tests, who signs off)
-
-### Tooling and Access (System-Level QA Document Only)
-
-- Include only if non-standard tools or access requests are required
-- List notable tools/services needed for test execution and any access approvals
-- Avoid assuming specific vendors unless the project context names them
-- Mark each item's status as Ready or Pending based on available information
-- This section applies only to `test-design-qa-template.md` output
-
-### Implementation Planning Handoff (Optional)
-
-- Include only if test design produces implementation tasks that must be scheduled
-- Derive items from Dependencies & Test Blockers, tooling/access needs, and QA infra setup
-- If no dedicated QA, assign ownership to Dev/Platform as appropriate
-- Keep the list short; avoid per-milestone breakdown tables
-
-### Interworking & Regression
-
-- Identify services and components that interact with or are affected by the feature under test
-- For each, define what existing regression tests must pass before release
-- Note any cross-team coordination needed for regression validation (e.g., shared staging environments, upstream API contracts)