better-dsh 0.2.5-c → 0.2.5-e

package/docs/80_upstream-docs-and-skills/hermes-dev-skill/src/docs/developer-guide/micro-compaction.md

@@ -1,406 +0,0 @@
----
-title: "Micro-compaction"
-description: "How micro-compaction amortizes context compression cost: triggers, tail sizing, the cached-prefix trade-off"
----
-
-# Micro-compaction
-
-**A way to amortize the cost of compression.**
-
-Long conversations eventually outgrow the model's context window, and something
-has to be thrown away or summarized. Hermes has always done this in one batch:
-when the transcript crosses a threshold, the session stops, a large chunk of the
-middle is summarized in a single call, and the conversation resumes. That works,
-but the whole bill comes due at once — one visible pause, one big summarization
-request, at whatever moment you happened to cross the line.
-
-Micro-compaction pays the same bill in instalments. After each completed turn,
-Hermes folds the single oldest un-absorbed exchange into a running summary. The
-work is the same work; it just happens continuously, a piece at a time, instead
-of all at once in the middle of your session.
-
-It is not free and it is not a magic bullet, and it is **off by default** —
-`compression.micro_compact: true` turns it on. Each pass is a real call to the
-compression model, and it runs at the end of a turn — your answer has already
-streamed, but the turn does not close until the pass finishes. Each pass also
-rewrites already-sent history, which breaks the provider prompt-cache prefix
-every turn; read [Prompt caching](#prompt-caching--the-cost-you-are-opting-into)
-before enabling it, because for some setups that cost exceeds the benefit.
-
-What the feature gives you is a **tuning option**: you choose how the
-compression cost is distributed, and which model pays it. See
-[Choosing a compression model](#choosing-a-compression-model), because that
-choice matters more than anything else here.
-
-**The tradeoff is that knowledge gets a little earlier than you may be used to.**
-Because compaction is always running, older parts of the conversation become
-summaries sooner than they would under batch compaction — which leaves
-everything verbatim until the window actually fills. Detail from earlier in the
-session turns second-hand faster. You trade some of that fidelity for never
-eating one long stall, and for a context window that stays consistently smaller
-rather than sawtoothing up to the threshold and back.
-
----
-
-## What it does
-
-After every turn that finishes normally, `finalize_turn` asks the context
-compressor to absorb **one** exchange:
-
-1. Find the oldest exchange that hasn't been summarized yet.
-2. Send just that exchange, plus the current running summary, to the auxiliary
-   summarization model.
-3. Replace those messages in the transcript with a single summary marker
-   carrying the updated running summary.
-
-One exchange per turn. The per-turn cost stays bounded no matter how long the
-conversation gets.
-
-An **exchange** is one full agent turn: an assistant message together with its
-tool results and any follow-up assistant iterations, up to the next user
-message. In tool-heavy work that's where the bulk of the tokens live — a
-file read or a command's output dwarfs the surrounding prose — which is why
-absorbing one exchange at a time is worth doing at all. Taking the whole turn
-(rather than a single assistant+tools group) also keeps the transcript's role
-alternation strictly valid: the summary marker is an assistant-role message,
-and a full turn is always bounded by user messages on both sides.
-
-## Your messages are never compacted
-
-An exchange deliberately starts at the *assistant* message. Micro-compaction
-walks straight past user messages to get there, so **what you typed is never
-summarized** — your prompts stay verbatim for the entire session, no matter how
-long it runs or how many times compaction fires.
-
-This is the most useful property of the whole design, and it's worth being
-explicit about why. What the assistant produces is largely an account of what it
-did: it read this file, it ran that command, it got this result. That kind of
-narration survives summarising with very little loss — "it did it this way" is
-about as informative compressed as it was in full. Your instructions are a
-different kind of thing. They're the intent everything else is derived from, and
-they cannot be reconstructed from the work that followed. Paraphrasing "use the
-existing retry helper, don't add a new one" into a summary is exactly how an
-agent ends up confidently doing the thing you told it not to, six turns later.
-
-So the asymmetry is on purpose: compact the derived material, keep the source of
-truth. The cost is a floor on how small the middle can get, since user turns
-accumulate and are never absorbed. In practice that floor is low — a prompt is
-normally a tiny fraction of what a single tool result costs — but it is a real
-floor. If you routinely paste 10–20K-token prompts, that weight stays in context
-by design.
-
-## What it never touches
-
-Two more regions are protected and stay verbatim:
-
-- **The head** — the system prompt and the opening messages, so the session's
-  founding instructions are never paraphrased.
-- **The tail** — a token-budgeted window of the most recent messages, so
-  everything that's immediately relevant is still there in full.
-
-Micro-compaction only ever works in the middle, between those two.
-
-## How it works
-
-### The cursor
-
-The compressor keeps a cursor: the index of the first message not yet absorbed.
-Each successful pass advances it past the exchange it just summarized.
-
-If that in-memory cursor is missing or out of range — a fresh process, a resumed
-session — it's recovered by scanning the transcript for the last summary marker
-and resuming just after it. The transcript itself is the source of truth, so
-resuming a session doesn't re-summarize work already done.
-
-### The rolling summary
-
-Rather than keeping a pile of per-exchange summaries, there is exactly one
-running summary that each new exchange is merged into. The summarizer is asked
-to fold in the new material's decisions, requirements, file paths and open
-questions, drop details that are no longer relevant, and preserve the existing
-structure. It's also explicitly instructed to replace any credentials it
-encounters with `[REDACTED]`.
-
-Because that summary is cumulative, only the newest marker is kept in the
-transcript. Earlier markers are strictly redundant — the current summary already
-contains everything they held — so they're dropped as they're superseded. This
-matters more than it sounds: leaving them in place stacks near-duplicate copies
-of the same text, each with its own heading and end-marker scaffolding, and the
-transcript grows on every turn instead of shrinking.
-
-### Defrag
-
-Merge into a summary often enough and it gets baggy — repetitive, and larger
-than the material justifies. When the running summary crosses a token threshold
-(2000 by default), the next pass **defrags**: one auxiliary call re-summarizes
-the running summary *itself* into a fresh compact version, and the summary
-marker in the transcript is rewritten in place.
-
-Defrag never touches the transcript's structure — no messages are absorbed or
-spliced, the cursor doesn't move, and user turns are untouched. It processes
-only the accumulated summary text, never conversation messages, so the
-"your messages are never compacted" guarantee holds through it.
-
-### Staying in step with the session database
-
-The in-memory splice alone isn't enough. Hermes's normal session flush is
-append-only, so the original rows would stay marked active and a resume would
-load *both* the summary and the messages it replaced — putting the session
-straight over the context limit.
-
-So each pass also calls `archive_and_compact`, which atomically soft-archives the
-active rows and inserts the compacted set. The messages are then stamped as
-already-persisted so the append-only flush that follows skips them. If that
-database step fails, it's logged and the session continues; the resume would
-double-load until the next batch compression cleans up.
-
-### When the summarizer fails
-
-A summarization call can fail — the auxiliary model is unreachable, out of quota,
-or the exchange itself is somehow unsummarizable. The transcript is left
-untouched and the failure is counted.
-
-If the *same* exchange fails three times in a row, the cursor is advanced past it
-anyway. Without that, one bad exchange would be retried on every single turn
-forever. Those skipped messages stay in the transcript and get picked up by the
-next batch compaction.
-
-## Interaction with batch compaction
-
-Micro-compaction doesn't replace batch compaction — it defers it. Threshold-based
-compaction is still there and still fires if the window fills anyway, and its
-summary markers are the same format, so the two interoperate. In practice
-micro-compaction keeps the transcript far enough below the threshold that the
-batch path fires much less often.
-
-## Configuration
-
-Micro-compaction is **off by default**. Turn it on explicitly:
-
-```yaml
-compression:
-  micro_compact: true             # default: false
-  micro_compact_every_n_turns: 1  # cadence — how often a pass runs
-  micro_compact_defrag_threshold_tokens: 2000
-```
-
-With `micro_compact` unset or `false` Hermes behaves exactly as it always has:
-batch-only compaction. Everything else about compression is unchanged.
-
-`micro_compact_every_n_turns` is the knob that matters most after the on/off
-switch, because it sets how often you pay the cache break described below. At
-`1` a pass runs after every completed turn: the most aggressive reclaim, and
-one broken prefix per turn. At `5` you get a fifth of the breaks and a fifth of
-the reclaim rate, which is the right direction if your sessions are long-lived
-and your provider's cache discount is deep. Values below `1` are clamped to `1`
-rather than silently disabling the feature. The counter advances per turn, not
-per committed pass, so a turn with nothing to absorb still moves the cadence
-along and cannot wedge it.
-
-`micro_compact_defrag_threshold_tokens` is when the rolling summary gets
-re-summarized instead of growing forever — see [Defrag](#defrag).
-
-It ships opt-in rather than on because of the prompt-cache cost described in
-the next section — that cost is real, it is not universally worth paying, and
-it should be a decision you make rather than one you inherit.
-
-## Prompt caching — the cost you are opting into
-
-Read this before enabling the feature. It is the strongest argument against it.
-
-A long-lived conversation reuses a cached prompt prefix every turn, and cached
-input tokens are billed at a fraction of uncached ones. That discount survives
-only as long as the prefix does not change. **A micro-compaction pass rewrites
-already-sent history**, which invalidates the prefix from the rewrite point
-onward — so with micro-compaction on, you break the cache *every turn* instead
-of once per batch compaction.
-
-This is the same cost the proactive prune deliberately avoids. That path gates
-itself behind `compression.proactive_prune_min_reclaim_tokens` (4096 by
-default) precisely so its rewrites stay, in the words of the config comment,
-"one big episodic break instead of a tiny break every tool iteration."
-
-Micro-compaction has no equivalent *reclaim-size* gate — a pass commits
-whatever the one absorbed exchange happened to save, large or small. What it
-has instead is a *frequency* dial, `micro_compact_every_n_turns`. Raising it
-makes the breaks rarer and more episodic, which is the same end the prune's
-gate serves by a different route, though it gets there by absorbing less rather
-than by waiting for a bigger win. If you want the prune's exact semantics here,
-a reclaim threshold on micro-compaction is the obvious follow-up and does not
-exist yet.
-
-So the honest framing is a trade of one cost for another, not a saving:
-
-| | Batch-only (default) | Micro-compaction on |
-|---|---|---|
-| Compression stalls | One long stall at the threshold | Spread across turns |
-| Context occupancy | Sawtooths up to the threshold | Stays low and flat |
-| Cache prefix | Intact between compactions | Broken every turn |
-
-Which side wins depends on numbers specific to you: how much your provider
-discounts cached input, how large your prefix is, how long your sessions run,
-and how much a mid-session stall actually costs you. On a provider with a deep
-cache discount and a big prefix, the per-turn invalidation can plausibly cost
-more than the stall it removes. Measure your own sessions — see
-[Measuring it](#measuring-it) — rather than assuming.
-
-## Choosing a compression model
-
-Micro-compaction uses the `auxiliary.compression` model:
-
-```yaml
-auxiliary:
-  compression:
-    provider: openai-api
-    model: <your choice>
-    base_url: <endpoint>
-```
-
-This is the single most important knob, and there is no universally right
-answer — it depends on your hardware and what you are willing to trade.
-
-Each pass sends the running summary plus one exchange, so the prompt is small
-(a few thousand tokens) but the call happens **every turn**, at the end of the
-turn. Two properties matter:
-
-- **Latency dominates.** Because a pass runs per turn, its wall-clock cost is
-  felt repeatedly. A model that takes 30 seconds turns every turn into a turn
-  plus 30 seconds.
-- **Reasoning models are a poor fit.** Merging one exchange into a summary is
-  mechanical work. A thinking model will spend reasoning tokens on it and be
-  substantially slower than a plain instruct model of similar size, for no
-  benefit to the output.
-
-Some measured points, on one particular setup — treat them as illustrations of
-the shape, not as recommendations:
-
-| model | observed |
-|---|---|
-| 7B 4-bit instruct, local (MLX, Apple Silicon) | ~31s per pass; box also serving other work |
-| large MoE reasoning model, remote GPU | noticeably slower still — thinking tokens on a summarisation task |
-
-The pattern is that a small, fast, non-reasoning instruct model is usually the
-right shape, and that a bigger or "smarter" model is often worse here rather
-than better. Where that lands for you depends on what you have to run it on.
-
-If passes feel too slow, your options in rough order of effect are: pick a
-faster or smaller compression model; give it a less contended host; or turn
-micro-compaction off and go back to batch compaction.
-
-## Measuring it
-
-Micro-compaction is not primarily a token-saving or time-saving optimisation,
-and judging it on tokens saved will undersell it. The two things it actually
-buys you are:
-
-1. **The long pause is amortized.** The same summarization work happens, but as
-   small increments after turns instead of one stall in the middle of a session.
-2. **Your context lasts longer.** Because the middle is continuously reclaimed,
-   occupancy stays low instead of sawtoothing up to the threshold. A session
-   runs much further — often indefinitely — before it needs a hard compaction
-   at all.
-
-So the number that matters is **occupancy**: how full the window is being kept,
-as a percentage of the compaction threshold. A session that holds steady around
-40% has headroom to keep going; one climbing through 90% is about to stall. The
-second number is **how many batch compactions actually fired** — ideally none.
-
-A session can save nothing on paper and still be a clear win on both counts.
-
-Every pass emits one content-free JSON line, in the same style as the batch
-compaction telemetry:
-
-```
-micro compaction telemetry: {"event":"micro_compaction","outcome":"absorbed",
-"tokens_before":12739,"tokens_after":12060,"tokens_delta":-679,
-"occupancy_pct":38.4,"threshold_tokens":34816,"context_limit":40960,
-"exchange_tokens":868,"rolling_summary_tokens":31,"passes_total":1,
-"tokens_saved_total":679,"duration_ms":14,...}
-```
-
-`occupancy_pct` is `tokens_after` as a share of the compaction threshold -- the
-headroom figure. It is null when the model's window has not been resolved yet:
-the telemetry reads only the cached value, because resolving it can issue a
-synchronous `/models` probe and telemetry must never be what blocks a turn.
-
-`tokens_delta` is negative when the pass shrank the transcript.
-`tokens_saved_total` and `passes_total` accumulate across the session, so a whole
-run can be summarised from its last line. No transcript content appears in the
-payload — only counts.
-
-To turn a log into an answer:
-
-```
-python scripts/micro_compaction_report.py [--per-session] [LOGFILE ...]
-```
-
-Defaults to `$HERMES_HOME/logs/agent.log`. It reports passes, outcome mix, net
-tokens saved, mean absorbed-exchange size and pass durations.
-
-### What it looks like when it is working
-
-One real session — a 3.5 hour whole-project code review, ~75K tokens of
-transcript, 400K window, compaction threshold at 320K:
-
-| pass | messages | tokens | delta | occupancy | duration |
-|---|---|---|---|---|---|
-| 1 | 40 -> 39 | 27,479 -> 27,778 | +299 | 8.7% | 2.2s |
-| 2 | 61 -> 59 | 48,676 -> 48,128 | -548 | 15.0% | 4.5s |
-| 3 | 70 -> 67 | 58,309 -> 55,915 | -2,394 | 17.5% | 9.1s |
-| 4 | 84 -> 80 | 75,251 -> 69,818 | -5,433 | 21.8% | 36.2s |
-| 5 | 84 -> 80 | 74,659 -> 70,264 | -4,395 | 22.0% | 31.2s |
-
-Three things to read off it.
-
-**Occupancy flattened.** It climbed to about 22% and stopped. The last two
-passes are identical (84 -> 80 messages); between them the conversation added
-4,841 tokens and micro-compaction reclaimed 4,395. That is equilibrium: the
-window holds steady instead of marching toward the threshold.
-
-**No batch compaction fired.** Across the whole session the long pause never
-happened.
-
-**Reclamation only ramps after the tail budget.** The first passes recovered
-almost nothing, because below the tail budget (here 64,000 tokens, 16% of the
-window) nearly the whole transcript is protected tail and there is very little
-that may be touched. Early sessions legitimately show no passes at all.
-
-And the cost, stated plainly: passes ran 2 to 37 seconds, median around 31, on
-a small local model that was also serving other work. Roughly two minutes of
-summarisation spread across three and a half hours. Against one batch
-compaction of a 75K-token middle that is still the better trade, but a
-37-second increment is not a rounding error. See
-[Choosing a compression model](#choosing-a-compression-model).
-
-### Reading the numbers honestly
-
-**The first pass in a session usually costs tokens rather than saving them.**
-Inserting the summary marker carries a fixed ~400 tokens of scaffolding — the
-compaction preamble, the historical heading, the end marker — and on pass one
-that is paid against a single absorbed exchange. A first pass showing
-`tokens_delta: +330` is not a malfunction.
-
-From the second pass on, the marker is *replaced* rather than added, so the
-scaffolding is already paid for and each absorbed exchange is close to pure
-saving. The break-even is normally the second or third pass. This is why the
-per-session view matters more than any single line: judge the feature on a
-session's trajectory, not on one turn.
-
-The plainer human-readable lines are still there too:
-
-```
-Micro-compaction: 37 -> 36 messages
-Micro-compaction defrag: rolling summary re-summarized (1843 chars)
-Micro-compaction: skipping exchange at cursor 12 after 3 consecutive failures
-```
-
-Message counts move by small amounts — that's expected. The token count is where
-the effect shows: absorbing one tool-heavy exchange can drop hundreds of tokens
-while changing the message count by one or two.
-
-## Failure behaviour
-
-Micro-compaction is best-effort throughout. The call in `finalize_turn` is wrapped
-so that any exception is logged and swallowed — a failure returns the conversation
-unchanged and the turn completes normally. It can degrade, but it shouldn't be
-able to break a session.

package/docs/80_upstream-docs-and-skills/hermes-dev-skill/src/docs/developer-guide/middleware.md

@@ -1,266 +0,0 @@
----
-title: "Middleware"
-description: "Behavior-changing plugin middleware for LLM and tool calls: contract, execution order, examples"
----
-
-# Hermes Middleware
-
-Hermes middleware is the behavior-changing companion to observer hooks.
-Observer hooks report what happened. Middleware can change what happens by
-rewriting a request before execution or by wrapping the execution callback
-itself.
-
-This contract is intentionally backend-neutral. A plugin can use it for local
-policy, request shaping, tracing, adaptive routing, cache control, sandbox
-selection, or handoff to runtimes such as NeMo Relay without changing Hermes'
-planner, model provider adapters, tool registry, memory, or CLI UX.
-
-With middleware enabled, plugins can:
-
-- Rewrite LLM provider request kwargs before Hermes calls the provider.
-- Rewrite tool arguments before guardrails, approval checks, hooks, and tool
-  execution see them.
-- Wrap the actual LLM execution callback while preserving Hermes retry,
-  streaming, interrupt, and hook behavior.
-- Wrap the actual tool execution callback while preserving Hermes guardrails,
-  approval, post-tool hooks, and tool-result transformation.
-
-## Contract
-
-Plugins register middleware from `register(ctx)`:
-
-```python
-def register(ctx):
-    ctx.register_middleware("llm_request", on_llm_request)
-    ctx.register_middleware("llm_execution", on_llm_execution)
-    ctx.register_middleware("tool_request", on_tool_request)
-    ctx.register_middleware("tool_execution", on_tool_execution)
-```
-
-Every middleware callback receives:
-
-- `telemetry_schema_version`: currently `hermes.observer.v1`
-- `middleware_schema_version`: currently `hermes.middleware.v1`
-- Runtime context such as `session_id`, `task_id`, `turn_id`,
-  `api_request_id`, `provider`, `model`, `api_mode`, `tool_name`, and
-  `tool_call_id` when applicable.
-
-Supported middleware kinds:
-
-| Kind | Payload | Return shape | Purpose |
-| --- | --- | --- | --- |
-| `llm_request` | `request`, `original_request` | `{"request": {...}}` | Replace effective provider kwargs before provider execution. |
-| `tool_request` | `tool_name`, `args`, `original_args` | `{"args": {...}}` | Replace effective tool args before hooks, guardrails, approvals, and execution. |
-| `llm_execution` | `request`, `original_request`, `next_call` | Any provider response | Wrap or replace the actual provider call. |
-| `tool_execution` | `tool_name`, `args`, `original_args`, `next_call` | Any tool result | Wrap or replace the actual tool call. |
-
-Request middleware can return optional trace fields:
-
-```python
-return {
-    "request": updated_request,
-    "source": "my-plugin",
-    "reason": "selected fallback model",
-}
-```
-
-Hermes stores those trace entries in later observer hook payloads as
-`middleware_trace`.
-
-Execution middleware receives a `next_call` callback. Call it to continue the
-chain:
-
-```python
-def on_tool_execution(**kwargs):
-    result = kwargs["next_call"](kwargs["args"])
-    return result
-```
-
-If multiple plugins register the same execution middleware kind, Hermes runs
-them as a nested chain in registration order. Middleware failures are fail-open:
-Hermes logs a warning and continues with the next middleware or the base
-runtime path.
-
-## Execution Order
-
-### LLM Calls
-
-For each provider request, Hermes applies middleware in this order:
-
-1. Build provider kwargs from the current conversation.
-2. Apply `llm_request` middleware.
-3. Emit `pre_api_request` observer hooks with the effective request.
-4. Run provider execution through `llm_execution` middleware.
-5. Emit `post_api_request` or `api_request_error` observer hooks.
-
-Request middleware sees the full provider kwargs, including `messages` or
-Responses API `input`, model settings, tool definitions, stream options, and
-provider-specific options. Execution middleware receives the same effective
-request plus `next_call`.
-
-### Tool Calls
-
-For each tool call, Hermes applies middleware in this order:
-
-1. Parse and coerce model-provided tool arguments.
-2. Apply `tool_request` middleware.
-3. Run the normal Hermes pre-execution path against the effective arguments:
-   tool availability checks, observer block directives, guardrails, and
-   approval checks.
-4. Run tool execution through `tool_execution` middleware.
-5. Emit `post_tool_call` observer hooks.
-6. Apply `transform_tool_result` hooks before the result is appended back into
-   conversation context.
-
-Tool request middleware runs before approval checks. Use it carefully: a
-rewritten path, command, or URL is the value downstream policy will evaluate.
-
-## Enablement
-
-Middleware only runs for enabled plugins. For a bundled plugin:
-
-```bash
-hermes plugins enable <plugin-name>
-```
-
-For isolated local testing, use one `HERMES_HOME` for plugin enablement and the
-agent run:
-
-```bash
-export HERMES_HOME=/tmp/hermes-middleware-test
-mkdir -p "$HERMES_HOME"
-hermes plugins enable <plugin-name>
-hermes chat --query 'Reply exactly ok'
-```
-
-For source checkouts, prefer the source command so the runtime sees plugins and
-middleware from the working tree:
-
-```bash
-uv sync
-uv run hermes plugins enable <plugin-name>
-uv run hermes chat --query 'Reply exactly ok'
-```
-
-## Generic Plugin Examples
-
-The examples below are intentionally small. They show the middleware contract
-shape without depending on NeMo Relay.
-
-### LLM Request Middleware
-
-This plugin tags provider requests and records a middleware trace entry:
-
-```python
-def register(ctx):
-    ctx.register_middleware("llm_request", tag_llm_request)
-
-
-def tag_llm_request(**kwargs):
-    request = dict(kwargs["request"])
-    extra_body = dict(request.get("extra_body") or {})
-    extra_body.setdefault("metadata", {})["hermes_middleware_demo"] = True
-    request["extra_body"] = extra_body
-    return {
-        "request": request,
-        "source": "middleware-demo",
-        "reason": "tagged provider request",
-    }
-```
-
-The effective request is passed to `pre_api_request`, provider execution, and
-`post_api_request`.
-
-### Tool Request Middleware
-
-This plugin constrains `terminal` calls to a known working directory:
-
-```python
-def register(ctx):
-    ctx.register_middleware("tool_request", normalize_terminal_workdir)
-
-
-def normalize_terminal_workdir(**kwargs):
-    if kwargs.get("tool_name") != "terminal":
-        return None
-    args = dict(kwargs["args"])
-    args.setdefault("workdir", "/tmp/hermes-middleware-demo")
-    return {
-        "args": args,
-        "source": "middleware-demo",
-        "reason": "defaulted terminal workdir",
-    }
-```
-
-Because this runs before hooks and approvals, downstream telemetry and policy
-observe the rewritten `workdir`.
-
-### LLM Execution Middleware
-
-This plugin wraps the provider call and preserves the raw provider response:
-
-```python
-import time
-
-
-def register(ctx):
-    ctx.register_middleware("llm_execution", time_llm_execution)
-
-
-def time_llm_execution(**kwargs):
-    started = time.monotonic()
-    response = kwargs["next_call"](kwargs["request"])
-    elapsed_ms = int((time.monotonic() - started) * 1000)
-    print(f"llm_execution elapsed_ms={elapsed_ms}")
-    return response
-```
-
-Return the same response shape Hermes expects from the provider adapter. Do not
-wrap the response in a plugin-specific envelope unless the rest of the runtime
-expects that envelope.
-
-### Tool Execution Middleware
-
-This plugin wraps tool execution while preserving the tool result:
-
-```python
-def register(ctx):
-    ctx.register_middleware("tool_execution", annotate_tool_execution)
-
-
-def annotate_tool_execution(**kwargs):
-    result = kwargs["next_call"](kwargs["args"])
-    # Metrics, logging, or external routing can happen here.
-    return result
-```
-
-Execution middleware may call `next_call(modified_args)` to pass a changed
-payload to later middleware and the base tool dispatcher.
-
-Plugin-specific examples should live with the plugin that owns the behavior.
-NeMo Relay execution middleware is installed through an explicitly selected
-Relay `plugins.toml`; see
-[Relay shared metrics](relay-shared-metrics.md).
-
-## Safety Notes
-
-- Middleware should be deterministic for the same input unless it is explicitly
-  routing to a dynamic external system.
-- Request middleware should return complete replacement payloads, not partial
-  patches.
-- Execution middleware should call `next_call(...)` exactly once unless it is
-  intentionally short-circuiting execution.
-- If execution middleware raises before calling `next_call(...)`, Hermes treats
-  that as middleware failure and continues with the remaining middleware chain
-  and base execution.
-- If execution middleware calls `next_call(...)` successfully and then raises
-  during post-processing, Hermes preserves the downstream result and does not
-  run the provider or tool a second time.
-- If downstream provider or tool execution fails, middleware may let that error
-  propagate or translate it deliberately. Hermes does not convert downstream
-  failure into a successful `None` result.
-- Tool request middleware runs before approvals. If it mutates file paths,
-  commands, URLs, or arguments, the mutated values are what guardrails and
-  approvals evaluate.
-- Observer hooks remain the right place for read-only telemetry. Use middleware
-  only when a plugin needs to alter or wrap behavior.