aws-sdk 2.1398.0 → 2.1399.0

package/clients/s3.d.ts

@@ -34,19 +34,19 @@ declare class S3 extends S3Customizations {
    */
   completeMultipartUpload(callback?: (err: AWSError, data: S3.Types.CompleteMultipartUploadOutput) => void): Request<S3.Types.CompleteMultipartUploadOutput, AWSError>;
   /**
-   * Creates a copy of an object that is already stored in Amazon S3.  You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic action using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy (UploadPartCopy) API. For more information, see Copy Object Using the REST Multipart Upload API.  All copy requests must be authenticated. Additionally, you must have read access to the source object and write access to the destination bucket. For more information, see REST Authentication. Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account. A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. If the error occurs before the copy action starts, you receive a standard Amazon S3 error. If the error occurs during the copy operation, the error response is embedded in the 200 OK response. This means that a 200 OK response can contain either a success or an error. If you call the S3 API directly, make sure to design your application to parse the contents of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throws an exception (or, for the SDKs that don't use exceptions, they return the error). If the copy is successful, you receive a response with information about the copied object.  If the request is an HTTP 1.1 request, the response is chunk encoded. If it were not, it would not contain the content-length, and you would need to read the entire body.  The copy request charge is based on the storage class and Region that you specify for the destination object. For pricing information, see Amazon S3 pricing.  Amazon S3 transfer acceleration does not support cross-Region copies. If you request a cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad Request error. For more information, see Transfer Acceleration.   Metadata  When copying an object, you can preserve all metadata (default) or specify new metadata. However, the ACL is not preserved and is set to private for the user making the request. To override the default ACL setting, specify a new ACL when generating a copy request. For more information, see Using ACLs.  To specify whether you want the object metadata copied from the source object or replaced with metadata provided in the request, you can optionally add the x-amz-metadata-directive header. When you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Specifying Conditions in a Policy in the Amazon S3 User Guide. For a complete list of Amazon S3-specific condition keys, see Actions, Resources, and Condition Keys for Amazon S3.   x-amz-website-redirect-location is unique to each object and must be specified in the request headers to copy the value.   x-amz-copy-source-if Headers  To only copy an object under certain conditions, such as whether the Etag matches or whether the object was modified before or after a specified date, use the following request parameters:    x-amz-copy-source-if-match     x-amz-copy-source-if-none-match     x-amz-copy-source-if-unmodified-since     x-amz-copy-source-if-modified-since     If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:    x-amz-copy-source-if-match condition evaluates to true    x-amz-copy-source-if-unmodified-since condition evaluates to false   If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:    x-amz-copy-source-if-none-match condition evaluates to false    x-amz-copy-source-if-modified-since condition evaluates to true    All headers with the x-amz- prefix, including x-amz-copy-source, must be signed.   Server-side encryption  Amazon S3 automatically encrypts all new objects that are copied to an S3 bucket. When copying an object, if you don't specify encryption information in your copy request, the encryption setting of the target object is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a default encryption configuration that uses server-side encryption with an Key Management Service (KMS) key (SSE-KMS), or a customer-provided encryption key (SSE-C), Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the target object copy. When you perform a CopyObject operation, if you want to use a different type of encryption setting for the target object, you can use other appropriate encryption-related headers to encrypt the target object with a KMS key, an Amazon S3 managed key, or a customer-provided key. With server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts the data when you access it. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence. If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying. For more information about server-side encryption, see Using Server-Side Encryption. If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  Access Control List (ACL)-Specific Request Headers  When copying an object, you can optionally use headers to grant ACL-based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.  If the bucket that you're copying objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. For more information, see  Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.  If your bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.   Checksums  When copying an object, if it has a checksum, that checksum will be copied to the new object by default. When you copy the object over, you may optionally specify a different checksum algorithm to use with the x-amz-checksum-algorithm header.  Storage Class Options  You can use the CopyObject action to change the storage class of an object that is already stored in Amazon S3 using the StorageClass parameter. For more information, see Storage Classes in the Amazon S3 User Guide. If the source object's storage class is GLACIER, you must restore a copy of this object before you can use it as a source object for the copy operation. For more information, see RestoreObject. For more information, see Copying Objects.  Versioning  By default, x-amz-copy-source identifies the current version of an object to copy. If the current version is a delete marker, Amazon S3 behaves as if the object was deleted. To copy a different version, use the versionId subresource. If you enable versioning on the target bucket, Amazon S3 generates a unique version ID for the object being copied. This version ID is different from the version ID of the source object. Amazon S3 returns the version ID of the copied object in the x-amz-version-id response header in the response. If you do not enable versioning or suspend it on the target bucket, the version ID that Amazon S3 generates is always null.   The following operations are related to CopyObject:    PutObject     GetObject   
+   * Creates a copy of an object that is already stored in Amazon S3.  You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic action using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy (UploadPartCopy) API. For more information, see Copy Object Using the REST Multipart Upload API.  All copy requests must be authenticated. Additionally, you must have read access to the source object and write access to the destination bucket. For more information, see REST Authentication. Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account. A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. If the error occurs before the copy action starts, you receive a standard Amazon S3 error. If the error occurs during the copy operation, the error response is embedded in the 200 OK response. This means that a 200 OK response can contain either a success or an error. If you call the S3 API directly, make sure to design your application to parse the contents of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throws an exception (or, for the SDKs that don't use exceptions, they return the error). If the copy is successful, you receive a response with information about the copied object.  If the request is an HTTP 1.1 request, the response is chunk encoded. If it were not, it would not contain the content-length, and you would need to read the entire body.  The copy request charge is based on the storage class and Region that you specify for the destination object. For pricing information, see Amazon S3 pricing.  Amazon S3 transfer acceleration does not support cross-Region copies. If you request a cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad Request error. For more information, see Transfer Acceleration.   Metadata  When copying an object, you can preserve all metadata (the default) or specify new metadata. However, the access control list (ACL) is not preserved and is set to private for the user making the request. To override the default ACL setting, specify a new ACL when generating a copy request. For more information, see Using ACLs.  To specify whether you want the object metadata copied from the source object or replaced with metadata provided in the request, you can optionally add the x-amz-metadata-directive header. When you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Specifying Conditions in a Policy in the Amazon S3 User Guide. For a complete list of Amazon S3-specific condition keys, see Actions, Resources, and Condition Keys for Amazon S3.   x-amz-website-redirect-location is unique to each object and must be specified in the request headers to copy the value.   x-amz-copy-source-if Headers  To only copy an object under certain conditions, such as whether the Etag matches or whether the object was modified before or after a specified date, use the following request parameters:    x-amz-copy-source-if-match     x-amz-copy-source-if-none-match     x-amz-copy-source-if-unmodified-since     x-amz-copy-source-if-modified-since     If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:    x-amz-copy-source-if-match condition evaluates to true    x-amz-copy-source-if-unmodified-since condition evaluates to false   If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:    x-amz-copy-source-if-none-match condition evaluates to false    x-amz-copy-source-if-modified-since condition evaluates to true    All headers with the x-amz- prefix, including x-amz-copy-source, must be signed.   Server-side encryption  Amazon S3 automatically encrypts all new objects that are copied to an S3 bucket. When copying an object, if you don't specify encryption information in your copy request, the encryption setting of the target object is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a default encryption configuration that uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with customer-provided encryption keys (SSE-C), Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the target object copy. When you perform a CopyObject operation, if you want to use a different type of encryption setting for the target object, you can use other appropriate encryption-related headers to encrypt the target object with a KMS key, an Amazon S3 managed key, or a customer-provided key. With server-side encryption, Amazon S3 encrypts your data as it writes your data to disks in its data centers and decrypts the data when you access it. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence. If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying. For more information about server-side encryption, see Using Server-Side Encryption. If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  Access Control List (ACL)-Specific Request Headers  When copying an object, you can optionally use headers to grant ACL-based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups that are defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.  If the bucket that you're copying objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. For more information, see  Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.  If your bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.   Checksums  When copying an object, if it has a checksum, that checksum will be copied to the new object by default. When you copy the object over, you can optionally specify a different checksum algorithm to use with the x-amz-checksum-algorithm header.  Storage Class Options  You can use the CopyObject action to change the storage class of an object that is already stored in Amazon S3 by using the StorageClass parameter. For more information, see Storage Classes in the Amazon S3 User Guide. If the source object's storage class is GLACIER, you must restore a copy of this object before you can use it as a source object for the copy operation. For more information, see RestoreObject. For more information, see Copying Objects.  Versioning  By default, x-amz-copy-source header identifies the current version of an object to copy. If the current version is a delete marker, Amazon S3 behaves as if the object was deleted. To copy a different version, use the versionId subresource. If you enable versioning on the target bucket, Amazon S3 generates a unique version ID for the object being copied. This version ID is different from the version ID of the source object. Amazon S3 returns the version ID of the copied object in the x-amz-version-id response header in the response. If you do not enable versioning or suspend it on the target bucket, the version ID that Amazon S3 generates is always null.   The following operations are related to CopyObject:    PutObject     GetObject   
    */
   copyObject(params: S3.Types.CopyObjectRequest, callback?: (err: AWSError, data: S3.Types.CopyObjectOutput) => void): Request<S3.Types.CopyObjectOutput, AWSError>;
   /**
-   * Creates a copy of an object that is already stored in Amazon S3.  You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic action using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy (UploadPartCopy) API. For more information, see Copy Object Using the REST Multipart Upload API.  All copy requests must be authenticated. Additionally, you must have read access to the source object and write access to the destination bucket. For more information, see REST Authentication. Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account. A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. If the error occurs before the copy action starts, you receive a standard Amazon S3 error. If the error occurs during the copy operation, the error response is embedded in the 200 OK response. This means that a 200 OK response can contain either a success or an error. If you call the S3 API directly, make sure to design your application to parse the contents of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throws an exception (or, for the SDKs that don't use exceptions, they return the error). If the copy is successful, you receive a response with information about the copied object.  If the request is an HTTP 1.1 request, the response is chunk encoded. If it were not, it would not contain the content-length, and you would need to read the entire body.  The copy request charge is based on the storage class and Region that you specify for the destination object. For pricing information, see Amazon S3 pricing.  Amazon S3 transfer acceleration does not support cross-Region copies. If you request a cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad Request error. For more information, see Transfer Acceleration.   Metadata  When copying an object, you can preserve all metadata (default) or specify new metadata. However, the ACL is not preserved and is set to private for the user making the request. To override the default ACL setting, specify a new ACL when generating a copy request. For more information, see Using ACLs.  To specify whether you want the object metadata copied from the source object or replaced with metadata provided in the request, you can optionally add the x-amz-metadata-directive header. When you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Specifying Conditions in a Policy in the Amazon S3 User Guide. For a complete list of Amazon S3-specific condition keys, see Actions, Resources, and Condition Keys for Amazon S3.   x-amz-website-redirect-location is unique to each object and must be specified in the request headers to copy the value.   x-amz-copy-source-if Headers  To only copy an object under certain conditions, such as whether the Etag matches or whether the object was modified before or after a specified date, use the following request parameters:    x-amz-copy-source-if-match     x-amz-copy-source-if-none-match     x-amz-copy-source-if-unmodified-since     x-amz-copy-source-if-modified-since     If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:    x-amz-copy-source-if-match condition evaluates to true    x-amz-copy-source-if-unmodified-since condition evaluates to false   If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:    x-amz-copy-source-if-none-match condition evaluates to false    x-amz-copy-source-if-modified-since condition evaluates to true    All headers with the x-amz- prefix, including x-amz-copy-source, must be signed.   Server-side encryption  Amazon S3 automatically encrypts all new objects that are copied to an S3 bucket. When copying an object, if you don't specify encryption information in your copy request, the encryption setting of the target object is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a default encryption configuration that uses server-side encryption with an Key Management Service (KMS) key (SSE-KMS), or a customer-provided encryption key (SSE-C), Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the target object copy. When you perform a CopyObject operation, if you want to use a different type of encryption setting for the target object, you can use other appropriate encryption-related headers to encrypt the target object with a KMS key, an Amazon S3 managed key, or a customer-provided key. With server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts the data when you access it. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence. If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying. For more information about server-side encryption, see Using Server-Side Encryption. If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  Access Control List (ACL)-Specific Request Headers  When copying an object, you can optionally use headers to grant ACL-based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.  If the bucket that you're copying objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. For more information, see  Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.  If your bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.   Checksums  When copying an object, if it has a checksum, that checksum will be copied to the new object by default. When you copy the object over, you may optionally specify a different checksum algorithm to use with the x-amz-checksum-algorithm header.  Storage Class Options  You can use the CopyObject action to change the storage class of an object that is already stored in Amazon S3 using the StorageClass parameter. For more information, see Storage Classes in the Amazon S3 User Guide. If the source object's storage class is GLACIER, you must restore a copy of this object before you can use it as a source object for the copy operation. For more information, see RestoreObject. For more information, see Copying Objects.  Versioning  By default, x-amz-copy-source identifies the current version of an object to copy. If the current version is a delete marker, Amazon S3 behaves as if the object was deleted. To copy a different version, use the versionId subresource. If you enable versioning on the target bucket, Amazon S3 generates a unique version ID for the object being copied. This version ID is different from the version ID of the source object. Amazon S3 returns the version ID of the copied object in the x-amz-version-id response header in the response. If you do not enable versioning or suspend it on the target bucket, the version ID that Amazon S3 generates is always null.   The following operations are related to CopyObject:    PutObject     GetObject   
+   * Creates a copy of an object that is already stored in Amazon S3.  You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic action using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy (UploadPartCopy) API. For more information, see Copy Object Using the REST Multipart Upload API.  All copy requests must be authenticated. Additionally, you must have read access to the source object and write access to the destination bucket. For more information, see REST Authentication. Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account. A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. If the error occurs before the copy action starts, you receive a standard Amazon S3 error. If the error occurs during the copy operation, the error response is embedded in the 200 OK response. This means that a 200 OK response can contain either a success or an error. If you call the S3 API directly, make sure to design your application to parse the contents of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throws an exception (or, for the SDKs that don't use exceptions, they return the error). If the copy is successful, you receive a response with information about the copied object.  If the request is an HTTP 1.1 request, the response is chunk encoded. If it were not, it would not contain the content-length, and you would need to read the entire body.  The copy request charge is based on the storage class and Region that you specify for the destination object. For pricing information, see Amazon S3 pricing.  Amazon S3 transfer acceleration does not support cross-Region copies. If you request a cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad Request error. For more information, see Transfer Acceleration.   Metadata  When copying an object, you can preserve all metadata (the default) or specify new metadata. However, the access control list (ACL) is not preserved and is set to private for the user making the request. To override the default ACL setting, specify a new ACL when generating a copy request. For more information, see Using ACLs.  To specify whether you want the object metadata copied from the source object or replaced with metadata provided in the request, you can optionally add the x-amz-metadata-directive header. When you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Specifying Conditions in a Policy in the Amazon S3 User Guide. For a complete list of Amazon S3-specific condition keys, see Actions, Resources, and Condition Keys for Amazon S3.   x-amz-website-redirect-location is unique to each object and must be specified in the request headers to copy the value.   x-amz-copy-source-if Headers  To only copy an object under certain conditions, such as whether the Etag matches or whether the object was modified before or after a specified date, use the following request parameters:    x-amz-copy-source-if-match     x-amz-copy-source-if-none-match     x-amz-copy-source-if-unmodified-since     x-amz-copy-source-if-modified-since     If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:    x-amz-copy-source-if-match condition evaluates to true    x-amz-copy-source-if-unmodified-since condition evaluates to false   If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:    x-amz-copy-source-if-none-match condition evaluates to false    x-amz-copy-source-if-modified-since condition evaluates to true    All headers with the x-amz- prefix, including x-amz-copy-source, must be signed.   Server-side encryption  Amazon S3 automatically encrypts all new objects that are copied to an S3 bucket. When copying an object, if you don't specify encryption information in your copy request, the encryption setting of the target object is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a default encryption configuration that uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with customer-provided encryption keys (SSE-C), Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the target object copy. When you perform a CopyObject operation, if you want to use a different type of encryption setting for the target object, you can use other appropriate encryption-related headers to encrypt the target object with a KMS key, an Amazon S3 managed key, or a customer-provided key. With server-side encryption, Amazon S3 encrypts your data as it writes your data to disks in its data centers and decrypts the data when you access it. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence. If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying. For more information about server-side encryption, see Using Server-Side Encryption. If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  Access Control List (ACL)-Specific Request Headers  When copying an object, you can optionally use headers to grant ACL-based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups that are defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.  If the bucket that you're copying objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. For more information, see  Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.  If your bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.   Checksums  When copying an object, if it has a checksum, that checksum will be copied to the new object by default. When you copy the object over, you can optionally specify a different checksum algorithm to use with the x-amz-checksum-algorithm header.  Storage Class Options  You can use the CopyObject action to change the storage class of an object that is already stored in Amazon S3 by using the StorageClass parameter. For more information, see Storage Classes in the Amazon S3 User Guide. If the source object's storage class is GLACIER, you must restore a copy of this object before you can use it as a source object for the copy operation. For more information, see RestoreObject. For more information, see Copying Objects.  Versioning  By default, x-amz-copy-source header identifies the current version of an object to copy. If the current version is a delete marker, Amazon S3 behaves as if the object was deleted. To copy a different version, use the versionId subresource. If you enable versioning on the target bucket, Amazon S3 generates a unique version ID for the object being copied. This version ID is different from the version ID of the source object. Amazon S3 returns the version ID of the copied object in the x-amz-version-id response header in the response. If you do not enable versioning or suspend it on the target bucket, the version ID that Amazon S3 generates is always null.   The following operations are related to CopyObject:    PutObject     GetObject   
    */
   copyObject(callback?: (err: AWSError, data: S3.Types.CopyObjectOutput) => void): Request<S3.Types.CopyObjectOutput, AWSError>;
   /**
-   * Creates a new S3 bucket. To create a bucket, you must register with Amazon S3 and have a valid Amazon Web Services Access Key ID to authenticate requests. Anonymous requests are never allowed to create buckets. By creating the bucket, you become the bucket owner. Not every string is an acceptable bucket name. For information about bucket naming restrictions, see Bucket naming rules. If you want to create an Amazon S3 on Outposts bucket, see Create Bucket.  By default, the bucket is created in the US East (N. Virginia) Region. You can optionally specify a Region in the request body. You might choose a Region to optimize latency, minimize costs, or address regulatory requirements. For example, if you reside in Europe, you will probably find it advantageous to create buckets in the Europe (Ireland) Region. For more information, see Accessing a bucket.  If you send your create bucket request to the s3.amazonaws.com endpoint, the request goes to the us-east-1 Region. Accordingly, the signature calculations in Signature Version 4 must use us-east-1 as the Region, even if the location constraint in the request specifies another Region where the bucket is to be created. If you create a bucket in a Region other than US East (N. Virginia), your application must be able to handle 307 redirect. For more information, see Virtual hosting of buckets.   Access control lists (ACLs)  When creating a bucket using this operation, you can optionally configure the bucket ACL to specify the accounts or groups that should be granted specific permissions on the bucket.  If your CreateBucket request sets bucket owner enforced for S3 Object Ownership and specifies a bucket ACL that provides access to an external Amazon Web Services account, your request fails with a 400 error and returns the InvalidBucketAclWithObjectOwnership error code. For more information, see Controlling object ownership in the Amazon S3 User Guide.  There are two ways to grant the appropriate permissions using the request headers.   Specify a canned ACL using the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL.   Specify access permissions explicitly using the x-amz-grant-read, x-amz-grant-write, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. These headers map to the set of permissions Amazon S3 supports in an ACL. For more information, see Access control list (ACL) overview. You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:  x-amz-grant-read: id="11112222333", id="444455556666"      You can use either a canned ACL or specify access permissions explicitly. You cannot do both.   Permissions  In addition to s3:CreateBucket, the following permissions are required when your CreateBucket includes specific headers:    ACLs - If your CreateBucket request specifies ACL permissions and the ACL is public-read, public-read-write, authenticated-read, or if you specify access permissions explicitly through any other ACL, both s3:CreateBucket and s3:PutBucketAcl permissions are needed. If the ACL the CreateBucket request is private or doesn't specify any ACLs, only s3:CreateBucket permission is needed.     Object Lock - If ObjectLockEnabledForBucket is set to true in your CreateBucket request, s3:PutBucketObjectLockConfiguration and s3:PutBucketVersioning permissions are required.    S3 Object Ownership - If your CreateBucket request includes the x-amz-object-ownership header, s3:PutBucketOwnershipControls permission is required.     The following operations are related to CreateBucket:    PutObject     DeleteBucket   
+   * Creates a new S3 bucket. To create a bucket, you must register with Amazon S3 and have a valid Amazon Web Services Access Key ID to authenticate requests. Anonymous requests are never allowed to create buckets. By creating the bucket, you become the bucket owner. Not every string is an acceptable bucket name. For information about bucket naming restrictions, see Bucket naming rules. If you want to create an Amazon S3 on Outposts bucket, see Create Bucket.  By default, the bucket is created in the US East (N. Virginia) Region. You can optionally specify a Region in the request body. You might choose a Region to optimize latency, minimize costs, or address regulatory requirements. For example, if you reside in Europe, you will probably find it advantageous to create buckets in the Europe (Ireland) Region. For more information, see Accessing a bucket.  If you send your create bucket request to the s3.amazonaws.com endpoint, the request goes to the us-east-1 Region. Accordingly, the signature calculations in Signature Version 4 must use us-east-1 as the Region, even if the location constraint in the request specifies another Region where the bucket is to be created. If you create a bucket in a Region other than US East (N. Virginia), your application must be able to handle 307 redirect. For more information, see Virtual hosting of buckets.   Permissions  In addition to s3:CreateBucket, the following permissions are required when your CreateBucket request includes specific headers:    Access control lists (ACLs) - If your CreateBucket request specifies access control list (ACL) permissions and the ACL is public-read, public-read-write, authenticated-read, or if you specify access permissions explicitly through any other ACL, both s3:CreateBucket and s3:PutBucketAcl permissions are needed. If the ACL for the CreateBucket request is private or if the request doesn't specify any ACLs, only s3:CreateBucket permission is needed.     Object Lock - If ObjectLockEnabledForBucket is set to true in your CreateBucket request, s3:PutBucketObjectLockConfiguration and s3:PutBucketVersioning permissions are required.    S3 Object Ownership - If your CreateBucket request includes the x-amz-object-ownership header, then the s3:PutBucketOwnershipControls permission is required. By default, ObjectOwnership is set to BucketOWnerEnforced and ACLs are disabled. We recommend keeping ACLs disabled, except in uncommon use cases where you must control access for each object individually. If you want to change the ObjectOwnership setting, you can use the x-amz-object-ownership header in your CreateBucket request to set the ObjectOwnership setting of your choice. For more information about S3 Object Ownership, see Controlling object ownership  in the Amazon S3 User Guide.    S3 Block Public Access - If your specific use case requires granting public access to your S3 resources, you can disable Block Public Access. You can create a new bucket with Block Public Access enabled, then separately call the  DeletePublicAccessBlock  API. To use this operation, you must have the s3:PutBucketPublicAccessBlock permission. By default, all Block Public Access settings are enabled for new buckets. To avoid inadvertent exposure of your resources, we recommend keeping the S3 Block Public Access settings enabled. For more information about S3 Block Public Access, see Blocking public access to your Amazon S3 storage  in the Amazon S3 User Guide.        If your CreateBucket request sets BucketOwnerEnforced for Amazon S3 Object Ownership and specifies a bucket ACL that provides access to an external Amazon Web Services account, your request fails with a 400 error and returns the InvalidBucketAcLWithObjectOwnership error code. For more information, see Setting Object Ownership on an existing bucket  in the Amazon S3 User Guide.   The following operations are related to CreateBucket:    PutObject     DeleteBucket   
    */
   createBucket(params: S3.Types.CreateBucketRequest, callback?: (err: AWSError, data: S3.Types.CreateBucketOutput) => void): Request<S3.Types.CreateBucketOutput, AWSError>;
   /**
-   * Creates a new S3 bucket. To create a bucket, you must register with Amazon S3 and have a valid Amazon Web Services Access Key ID to authenticate requests. Anonymous requests are never allowed to create buckets. By creating the bucket, you become the bucket owner. Not every string is an acceptable bucket name. For information about bucket naming restrictions, see Bucket naming rules. If you want to create an Amazon S3 on Outposts bucket, see Create Bucket.  By default, the bucket is created in the US East (N. Virginia) Region. You can optionally specify a Region in the request body. You might choose a Region to optimize latency, minimize costs, or address regulatory requirements. For example, if you reside in Europe, you will probably find it advantageous to create buckets in the Europe (Ireland) Region. For more information, see Accessing a bucket.  If you send your create bucket request to the s3.amazonaws.com endpoint, the request goes to the us-east-1 Region. Accordingly, the signature calculations in Signature Version 4 must use us-east-1 as the Region, even if the location constraint in the request specifies another Region where the bucket is to be created. If you create a bucket in a Region other than US East (N. Virginia), your application must be able to handle 307 redirect. For more information, see Virtual hosting of buckets.   Access control lists (ACLs)  When creating a bucket using this operation, you can optionally configure the bucket ACL to specify the accounts or groups that should be granted specific permissions on the bucket.  If your CreateBucket request sets bucket owner enforced for S3 Object Ownership and specifies a bucket ACL that provides access to an external Amazon Web Services account, your request fails with a 400 error and returns the InvalidBucketAclWithObjectOwnership error code. For more information, see Controlling object ownership in the Amazon S3 User Guide.  There are two ways to grant the appropriate permissions using the request headers.   Specify a canned ACL using the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL.   Specify access permissions explicitly using the x-amz-grant-read, x-amz-grant-write, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. These headers map to the set of permissions Amazon S3 supports in an ACL. For more information, see Access control list (ACL) overview. You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:  x-amz-grant-read: id="11112222333", id="444455556666"      You can use either a canned ACL or specify access permissions explicitly. You cannot do both.   Permissions  In addition to s3:CreateBucket, the following permissions are required when your CreateBucket includes specific headers:    ACLs - If your CreateBucket request specifies ACL permissions and the ACL is public-read, public-read-write, authenticated-read, or if you specify access permissions explicitly through any other ACL, both s3:CreateBucket and s3:PutBucketAcl permissions are needed. If the ACL the CreateBucket request is private or doesn't specify any ACLs, only s3:CreateBucket permission is needed.     Object Lock - If ObjectLockEnabledForBucket is set to true in your CreateBucket request, s3:PutBucketObjectLockConfiguration and s3:PutBucketVersioning permissions are required.    S3 Object Ownership - If your CreateBucket request includes the x-amz-object-ownership header, s3:PutBucketOwnershipControls permission is required.     The following operations are related to CreateBucket:    PutObject     DeleteBucket   
+   * Creates a new S3 bucket. To create a bucket, you must register with Amazon S3 and have a valid Amazon Web Services Access Key ID to authenticate requests. Anonymous requests are never allowed to create buckets. By creating the bucket, you become the bucket owner. Not every string is an acceptable bucket name. For information about bucket naming restrictions, see Bucket naming rules. If you want to create an Amazon S3 on Outposts bucket, see Create Bucket.  By default, the bucket is created in the US East (N. Virginia) Region. You can optionally specify a Region in the request body. You might choose a Region to optimize latency, minimize costs, or address regulatory requirements. For example, if you reside in Europe, you will probably find it advantageous to create buckets in the Europe (Ireland) Region. For more information, see Accessing a bucket.  If you send your create bucket request to the s3.amazonaws.com endpoint, the request goes to the us-east-1 Region. Accordingly, the signature calculations in Signature Version 4 must use us-east-1 as the Region, even if the location constraint in the request specifies another Region where the bucket is to be created. If you create a bucket in a Region other than US East (N. Virginia), your application must be able to handle 307 redirect. For more information, see Virtual hosting of buckets.   Permissions  In addition to s3:CreateBucket, the following permissions are required when your CreateBucket request includes specific headers:    Access control lists (ACLs) - If your CreateBucket request specifies access control list (ACL) permissions and the ACL is public-read, public-read-write, authenticated-read, or if you specify access permissions explicitly through any other ACL, both s3:CreateBucket and s3:PutBucketAcl permissions are needed. If the ACL for the CreateBucket request is private or if the request doesn't specify any ACLs, only s3:CreateBucket permission is needed.     Object Lock - If ObjectLockEnabledForBucket is set to true in your CreateBucket request, s3:PutBucketObjectLockConfiguration and s3:PutBucketVersioning permissions are required.    S3 Object Ownership - If your CreateBucket request includes the x-amz-object-ownership header, then the s3:PutBucketOwnershipControls permission is required. By default, ObjectOwnership is set to BucketOWnerEnforced and ACLs are disabled. We recommend keeping ACLs disabled, except in uncommon use cases where you must control access for each object individually. If you want to change the ObjectOwnership setting, you can use the x-amz-object-ownership header in your CreateBucket request to set the ObjectOwnership setting of your choice. For more information about S3 Object Ownership, see Controlling object ownership  in the Amazon S3 User Guide.    S3 Block Public Access - If your specific use case requires granting public access to your S3 resources, you can disable Block Public Access. You can create a new bucket with Block Public Access enabled, then separately call the  DeletePublicAccessBlock  API. To use this operation, you must have the s3:PutBucketPublicAccessBlock permission. By default, all Block Public Access settings are enabled for new buckets. To avoid inadvertent exposure of your resources, we recommend keeping the S3 Block Public Access settings enabled. For more information about S3 Block Public Access, see Blocking public access to your Amazon S3 storage  in the Amazon S3 User Guide.        If your CreateBucket request sets BucketOwnerEnforced for Amazon S3 Object Ownership and specifies a bucket ACL that provides access to an external Amazon Web Services account, your request fails with a 400 error and returns the InvalidBucketAcLWithObjectOwnership error code. For more information, see Setting Object Ownership on an existing bucket  in the Amazon S3 User Guide.   The following operations are related to CreateBucket:    PutObject     DeleteBucket   
    */
   createBucket(callback?: (err: AWSError, data: S3.Types.CreateBucketOutput) => void): Request<S3.Types.CreateBucketOutput, AWSError>;
   /**
@@ -74,11 +74,11 @@ declare class S3 extends S3Customizations {
    */
   deleteBucketAnalyticsConfiguration(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Deletes the cors configuration information set for the bucket. To use this operation, you must have permission to perform the s3:PutBucketCORS action. The bucket owner has this permission by default and can grant this permission to others.  For information about cors, see Enabling Cross-Origin Resource Sharing in the Amazon S3 User Guide. The following operations are related to DeleteBucketCors:    PutBucketCors     RESTOPTIONSobject   
+   * Deletes the cors configuration information set for the bucket. To use this operation, you must have permission to perform the s3:PutBucketCORS action. The bucket owner has this permission by default and can grant this permission to others.  For information about cors, see Enabling Cross-Origin Resource Sharing in the Amazon S3 User Guide.  Related Resources     PutBucketCors     RESTOPTIONSobject   
    */
   deleteBucketCors(params: S3.Types.DeleteBucketCorsRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Deletes the cors configuration information set for the bucket. To use this operation, you must have permission to perform the s3:PutBucketCORS action. The bucket owner has this permission by default and can grant this permission to others.  For information about cors, see Enabling Cross-Origin Resource Sharing in the Amazon S3 User Guide. The following operations are related to DeleteBucketCors:    PutBucketCors     RESTOPTIONSobject   
+   * Deletes the cors configuration information set for the bucket. To use this operation, you must have permission to perform the s3:PutBucketCORS action. The bucket owner has this permission by default and can grant this permission to others.  For information about cors, see Enabling Cross-Origin Resource Sharing in the Amazon S3 User Guide.  Related Resources     PutBucketCors     RESTOPTIONSobject   
    */
   deleteBucketCors(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -370,11 +370,11 @@ declare class S3 extends S3Customizations {
    */
   getBucketWebsite(callback?: (err: AWSError, data: S3.Types.GetBucketWebsiteOutput) => void): Request<S3.Types.GetBucketWebsiteOutput, AWSError>;
   /**
-   * Retrieves objects from Amazon S3. To use GET, you must have READ access to the object. If you grant READ access to the anonymous user, you can return the object without using an authorization header. An Amazon S3 bucket has no directory hierarchy such as you would find in a typical computer file system. You can, however, create a logical hierarchy by using object key names that imply a folder structure. For example, instead of naming an object sample.jpg, you can name it photos/2006/February/sample.jpg. To get an object from such a logical hierarchy, specify the full key name for the object in the GET operation. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg, specify the resource as /photos/2006/February/sample.jpg. For a path-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, specify the resource as /examplebucket/photos/2006/February/sample.jpg. For more information about request types, see HTTP Host Header Bucket Specification. For more information about returning the ACL of an object, see GetObjectAcl. If the object you are retrieving is stored in the S3 Glacier or S3 Glacier Deep Archive storage class, or S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this action returns an InvalidObjectState error. For information about restoring archived objects, see Restoring Archived Objects. Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with KMS keys (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys). Assuming you have the relevant permission to read object tags, the response also returns the x-amz-tagging-count header that provides the count of number of tags associated with the object. You can use GetObjectTagging to retrieve the tag set associated with an object.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 will return an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 will return an HTTP status code 403 ("access denied") error.    Versioning  By default, the GET action returns the current version of an object. To return a different version, use the versionId subresource.     If you supply a versionId, you need the s3:GetObjectVersion permission to access a specific version of an object. If you request a specific version, you do not need to have the s3:GetObject permission. If you request the current version without a specific version ID, only s3:GetObject permission is required. s3:GetObjectVersion permission won't be required.   If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes x-amz-delete-marker: true in the response.    For more information about versioning, see PutBucketVersioning.   Overriding Response Header Values  There are times when you want to override certain response header values in a GET response. For example, you might override the Content-Disposition response header value in your GET request. You can override values for a set of response headers using the following query parameters. These response header values are sent only on a successful request, that is, when status code 200 OK is returned. The set of headers you can override using these parameters is a subset of the headers that Amazon S3 accepts when you create an object. The response headers that you can override for the GET response are Content-Type, Content-Language, Expires, Cache-Control, Content-Disposition, and Content-Encoding. To override these header values in the GET response, you use the following request parameters.  You must sign the request, either using an Authorization header or a presigned URL, when using these parameters. They cannot be used with an unsigned (anonymous) request.     response-content-type     response-content-language     response-expires     response-cache-control     response-content-disposition     response-content-encoding     Overriding Response Header Values  If both of the If-Match and If-Unmodified-Since headers are present in the request as follows: If-Match condition evaluates to true, and; If-Unmodified-Since condition evaluates to false; then, S3 returns 200 OK and the data requested.  If both of the If-None-Match and If-Modified-Since headers are present in the request as follows: If-None-Match condition evaluates to false, and; If-Modified-Since condition evaluates to true; then, S3 returns 304 Not Modified response code. For more information about conditional requests, see RFC 7232.   The following operations are related to GetObject:    ListBuckets     GetObjectAcl   
+   * Retrieves objects from Amazon S3. To use GET, you must have READ access to the object. If you grant READ access to the anonymous user, you can return the object without using an authorization header. An Amazon S3 bucket has no directory hierarchy such as you would find in a typical computer file system. You can, however, create a logical hierarchy by using object key names that imply a folder structure. For example, instead of naming an object sample.jpg, you can name it photos/2006/February/sample.jpg. To get an object from such a logical hierarchy, specify the full key name for the object in the GET operation. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg, specify the resource as /photos/2006/February/sample.jpg. For a path-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, specify the resource as /examplebucket/photos/2006/February/sample.jpg. For more information about request types, see HTTP Host Header Bucket Specification. For more information about returning the ACL of an object, see GetObjectAcl. If the object you are retrieving is stored in the S3 Glacier Flexible Retrieval or S3 Glacier Deep Archive storage class, or S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this action returns an InvalidObjectState error. For information about restoring archived objects, see Restoring Archived Objects. Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with Amazon S3 managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 Bad Request error. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:    x-amz-server-side-encryption-customer-algorithm     x-amz-server-side-encryption-customer-key     x-amz-server-side-encryption-customer-key-MD5    For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys). Assuming you have the relevant permission to read object tags, the response also returns the x-amz-tagging-count header that provides the count of number of tags associated with the object. You can use GetObjectTagging to retrieve the tag set associated with an object.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Specifying Permissions in a Policy. If the object that you request doesn’t exist, the error that Amazon S3 returns depends on whether you also have the s3:ListBucket permission. If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 (Not Found) error. If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 ("access denied") error.  Versioning  By default, the GET action returns the current version of an object. To return a different version, use the versionId subresource.     If you supply a versionId, you need the s3:GetObjectVersion permission to access a specific version of an object. If you request a specific version, you do not need to have the s3:GetObject permission. If you request the current version without a specific version ID, only s3:GetObject permission is required. s3:GetObjectVersion permission won't be required.   If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes x-amz-delete-marker: true in the response.    For more information about versioning, see PutBucketVersioning.   Overriding Response Header Values  There are times when you want to override certain response header values in a GET response. For example, you might override the Content-Disposition response header value in your GET request. You can override values for a set of response headers using the following query parameters. These response header values are sent only on a successful request, that is, when status code 200 OK is returned. The set of headers you can override using these parameters is a subset of the headers that Amazon S3 accepts when you create an object. The response headers that you can override for the GET response are Content-Type, Content-Language, Expires, Cache-Control, Content-Disposition, and Content-Encoding. To override these header values in the GET response, you use the following request parameters.  You must sign the request, either using an Authorization header or a presigned URL, when using these parameters. They cannot be used with an unsigned (anonymous) request.     response-content-type     response-content-language     response-expires     response-cache-control     response-content-disposition     response-content-encoding     Overriding Response Header Values  If both of the If-Match and If-Unmodified-Since headers are present in the request as follows: If-Match condition evaluates to true, and; If-Unmodified-Since condition evaluates to false; then, S3 returns 200 OK and the data requested.  If both of the If-None-Match and If-Modified-Since headers are present in the request as follows: If-None-Match condition evaluates to false, and; If-Modified-Since condition evaluates to true; then, S3 returns 304 Not Modified response code. For more information about conditional requests, see RFC 7232.   The following operations are related to GetObject:    ListBuckets     GetObjectAcl   
    */
   getObject(params: S3.Types.GetObjectRequest, callback?: (err: AWSError, data: S3.Types.GetObjectOutput) => void): Request<S3.Types.GetObjectOutput, AWSError>;
   /**
-   * Retrieves objects from Amazon S3. To use GET, you must have READ access to the object. If you grant READ access to the anonymous user, you can return the object without using an authorization header. An Amazon S3 bucket has no directory hierarchy such as you would find in a typical computer file system. You can, however, create a logical hierarchy by using object key names that imply a folder structure. For example, instead of naming an object sample.jpg, you can name it photos/2006/February/sample.jpg. To get an object from such a logical hierarchy, specify the full key name for the object in the GET operation. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg, specify the resource as /photos/2006/February/sample.jpg. For a path-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, specify the resource as /examplebucket/photos/2006/February/sample.jpg. For more information about request types, see HTTP Host Header Bucket Specification. For more information about returning the ACL of an object, see GetObjectAcl. If the object you are retrieving is stored in the S3 Glacier or S3 Glacier Deep Archive storage class, or S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this action returns an InvalidObjectState error. For information about restoring archived objects, see Restoring Archived Objects. Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with KMS keys (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys). Assuming you have the relevant permission to read object tags, the response also returns the x-amz-tagging-count header that provides the count of number of tags associated with the object. You can use GetObjectTagging to retrieve the tag set associated with an object.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 will return an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 will return an HTTP status code 403 ("access denied") error.    Versioning  By default, the GET action returns the current version of an object. To return a different version, use the versionId subresource.     If you supply a versionId, you need the s3:GetObjectVersion permission to access a specific version of an object. If you request a specific version, you do not need to have the s3:GetObject permission. If you request the current version without a specific version ID, only s3:GetObject permission is required. s3:GetObjectVersion permission won't be required.   If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes x-amz-delete-marker: true in the response.    For more information about versioning, see PutBucketVersioning.   Overriding Response Header Values  There are times when you want to override certain response header values in a GET response. For example, you might override the Content-Disposition response header value in your GET request. You can override values for a set of response headers using the following query parameters. These response header values are sent only on a successful request, that is, when status code 200 OK is returned. The set of headers you can override using these parameters is a subset of the headers that Amazon S3 accepts when you create an object. The response headers that you can override for the GET response are Content-Type, Content-Language, Expires, Cache-Control, Content-Disposition, and Content-Encoding. To override these header values in the GET response, you use the following request parameters.  You must sign the request, either using an Authorization header or a presigned URL, when using these parameters. They cannot be used with an unsigned (anonymous) request.     response-content-type     response-content-language     response-expires     response-cache-control     response-content-disposition     response-content-encoding     Overriding Response Header Values  If both of the If-Match and If-Unmodified-Since headers are present in the request as follows: If-Match condition evaluates to true, and; If-Unmodified-Since condition evaluates to false; then, S3 returns 200 OK and the data requested.  If both of the If-None-Match and If-Modified-Since headers are present in the request as follows: If-None-Match condition evaluates to false, and; If-Modified-Since condition evaluates to true; then, S3 returns 304 Not Modified response code. For more information about conditional requests, see RFC 7232.   The following operations are related to GetObject:    ListBuckets     GetObjectAcl   
+   * Retrieves objects from Amazon S3. To use GET, you must have READ access to the object. If you grant READ access to the anonymous user, you can return the object without using an authorization header. An Amazon S3 bucket has no directory hierarchy such as you would find in a typical computer file system. You can, however, create a logical hierarchy by using object key names that imply a folder structure. For example, instead of naming an object sample.jpg, you can name it photos/2006/February/sample.jpg. To get an object from such a logical hierarchy, specify the full key name for the object in the GET operation. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg, specify the resource as /photos/2006/February/sample.jpg. For a path-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, specify the resource as /examplebucket/photos/2006/February/sample.jpg. For more information about request types, see HTTP Host Header Bucket Specification. For more information about returning the ACL of an object, see GetObjectAcl. If the object you are retrieving is stored in the S3 Glacier Flexible Retrieval or S3 Glacier Deep Archive storage class, or S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this action returns an InvalidObjectState error. For information about restoring archived objects, see Restoring Archived Objects. Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with Amazon S3 managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 Bad Request error. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:    x-amz-server-side-encryption-customer-algorithm     x-amz-server-side-encryption-customer-key     x-amz-server-side-encryption-customer-key-MD5    For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys). Assuming you have the relevant permission to read object tags, the response also returns the x-amz-tagging-count header that provides the count of number of tags associated with the object. You can use GetObjectTagging to retrieve the tag set associated with an object.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Specifying Permissions in a Policy. If the object that you request doesn’t exist, the error that Amazon S3 returns depends on whether you also have the s3:ListBucket permission. If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 (Not Found) error. If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 ("access denied") error.  Versioning  By default, the GET action returns the current version of an object. To return a different version, use the versionId subresource.     If you supply a versionId, you need the s3:GetObjectVersion permission to access a specific version of an object. If you request a specific version, you do not need to have the s3:GetObject permission. If you request the current version without a specific version ID, only s3:GetObject permission is required. s3:GetObjectVersion permission won't be required.   If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes x-amz-delete-marker: true in the response.    For more information about versioning, see PutBucketVersioning.   Overriding Response Header Values  There are times when you want to override certain response header values in a GET response. For example, you might override the Content-Disposition response header value in your GET request. You can override values for a set of response headers using the following query parameters. These response header values are sent only on a successful request, that is, when status code 200 OK is returned. The set of headers you can override using these parameters is a subset of the headers that Amazon S3 accepts when you create an object. The response headers that you can override for the GET response are Content-Type, Content-Language, Expires, Cache-Control, Content-Disposition, and Content-Encoding. To override these header values in the GET response, you use the following request parameters.  You must sign the request, either using an Authorization header or a presigned URL, when using these parameters. They cannot be used with an unsigned (anonymous) request.     response-content-type     response-content-language     response-expires     response-cache-control     response-content-disposition     response-content-encoding     Overriding Response Header Values  If both of the If-Match and If-Unmodified-Since headers are present in the request as follows: If-Match condition evaluates to true, and; If-Unmodified-Since condition evaluates to false; then, S3 returns 200 OK and the data requested.  If both of the If-None-Match and If-Modified-Since headers are present in the request as follows: If-None-Match condition evaluates to false, and; If-Modified-Since condition evaluates to true; then, S3 returns 304 Not Modified response code. For more information about conditional requests, see RFC 7232.   The following operations are related to GetObject:    ListBuckets     GetObjectAcl   
    */
   getObject(callback?: (err: AWSError, data: S3.Types.GetObjectOutput) => void): Request<S3.Types.GetObjectOutput, AWSError>;
   /**
@@ -450,11 +450,11 @@ declare class S3 extends S3Customizations {
    */
   headBucket(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * The HEAD action retrieves metadata from an object without returning the object itself. This action is useful if you're only interested in an object's metadata. To use HEAD, you must have READ access to the object. A HEAD request has the same options as a GET action on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic 400 Bad Request, 403 Forbidden or 404 Not Found code. It is not possible to retrieve the exact exception beyond these error codes. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys).    Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with KMS keys (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error.    The last modified property in this case is the creation date of the object.    Request headers are limited to 8 KB in size. For more information, see Common Request Headers. Consider the following when using request headers:    Consideration 1 – If both of the If-Match and If-Unmodified-Since headers are present in the request as follows:    If-Match condition evaluates to true, and;    If-Unmodified-Since condition evaluates to false;   Then Amazon S3 returns 200 OK and the data requested.    Consideration 2 – If both of the If-None-Match and If-Modified-Since headers are present in the request as follows:    If-None-Match condition evaluates to false, and;    If-Modified-Since condition evaluates to true;   Then Amazon S3 returns the 304 Not Modified response code.   For more information about conditional requests, see RFC 7232.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Actions, resources, and condition keys for Amazon S3. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 ("access denied") error.     The following actions are related to HeadObject:    GetObject     GetObjectAttributes   
+   * The HEAD action retrieves metadata from an object without returning the object itself. This action is useful if you're only interested in an object's metadata. To use HEAD, you must have READ access to the object. A HEAD request has the same options as a GET action on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic 400 Bad Request, 403 Forbidden or 404 Not Found code. It is not possible to retrieve the exact exception beyond these error codes. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers:    x-amz-server-side-encryption-customer-algorithm     x-amz-server-side-encryption-customer-key     x-amz-server-side-encryption-customer-key-MD5    For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys).    Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with Amazon S3 managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 Bad Request error.    The last modified property in this case is the creation date of the object.    Request headers are limited to 8 KB in size. For more information, see Common Request Headers. Consider the following when using request headers:    Consideration 1 – If both of the If-Match and If-Unmodified-Since headers are present in the request as follows:    If-Match condition evaluates to true, and;    If-Unmodified-Since condition evaluates to false;   Then Amazon S3 returns 200 OK and the data requested.    Consideration 2 – If both of the If-None-Match and If-Modified-Since headers are present in the request as follows:    If-None-Match condition evaluates to false, and;    If-Modified-Since condition evaluates to true;   Then Amazon S3 returns the 304 Not Modified response code.   For more information about conditional requests, see RFC 7232.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Actions, resources, and condition keys for Amazon S3. If the object you request doesn't exist, the error that Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 error.     The following actions are related to HeadObject:    GetObject     GetObjectAttributes   
    */
   headObject(params: S3.Types.HeadObjectRequest, callback?: (err: AWSError, data: S3.Types.HeadObjectOutput) => void): Request<S3.Types.HeadObjectOutput, AWSError>;
   /**
-   * The HEAD action retrieves metadata from an object without returning the object itself. This action is useful if you're only interested in an object's metadata. To use HEAD, you must have READ access to the object. A HEAD request has the same options as a GET action on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic 400 Bad Request, 403 Forbidden or 404 Not Found code. It is not possible to retrieve the exact exception beyond these error codes. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys).    Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with KMS keys (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error.    The last modified property in this case is the creation date of the object.    Request headers are limited to 8 KB in size. For more information, see Common Request Headers. Consider the following when using request headers:    Consideration 1 – If both of the If-Match and If-Unmodified-Since headers are present in the request as follows:    If-Match condition evaluates to true, and;    If-Unmodified-Since condition evaluates to false;   Then Amazon S3 returns 200 OK and the data requested.    Consideration 2 – If both of the If-None-Match and If-Modified-Since headers are present in the request as follows:    If-None-Match condition evaluates to false, and;    If-Modified-Since condition evaluates to true;   Then Amazon S3 returns the 304 Not Modified response code.   For more information about conditional requests, see RFC 7232.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Actions, resources, and condition keys for Amazon S3. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 ("access denied") error.     The following actions are related to HeadObject:    GetObject     GetObjectAttributes   
+   * The HEAD action retrieves metadata from an object without returning the object itself. This action is useful if you're only interested in an object's metadata. To use HEAD, you must have READ access to the object. A HEAD request has the same options as a GET action on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic 400 Bad Request, 403 Forbidden or 404 Not Found code. It is not possible to retrieve the exact exception beyond these error codes. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers:    x-amz-server-side-encryption-customer-algorithm     x-amz-server-side-encryption-customer-key     x-amz-server-side-encryption-customer-key-MD5    For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys).    Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with Amazon S3 managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 Bad Request error.    The last modified property in this case is the creation date of the object.    Request headers are limited to 8 KB in size. For more information, see Common Request Headers. Consider the following when using request headers:    Consideration 1 – If both of the If-Match and If-Unmodified-Since headers are present in the request as follows:    If-Match condition evaluates to true, and;    If-Unmodified-Since condition evaluates to false;   Then Amazon S3 returns 200 OK and the data requested.    Consideration 2 – If both of the If-None-Match and If-Modified-Since headers are present in the request as follows:    If-None-Match condition evaluates to false, and;    If-Modified-Since condition evaluates to true;   Then Amazon S3 returns the 304 Not Modified response code.   For more information about conditional requests, see RFC 7232.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Actions, resources, and condition keys for Amazon S3. If the object you request doesn't exist, the error that Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 error.     The following actions are related to HeadObject:    GetObject     GetObjectAttributes   
    */
   headObject(callback?: (err: AWSError, data: S3.Types.HeadObjectOutput) => void): Request<S3.Types.HeadObjectOutput, AWSError>;
   /**
@@ -542,11 +542,11 @@ declare class S3 extends S3Customizations {
    */
   putBucketAccelerateConfiguration(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Sets the permissions on an existing bucket using access control lists (ACL). For more information, see Using ACLs. To set the ACL of a bucket, you must have WRITE_ACP permission. You can use one of the following two ways to set a bucket's permissions:   Specify the ACL in the request body   Specify permissions using request headers    You cannot specify access permission using both the body and the request headers.  Depending on your application needs, you may choose to set the ACL on a bucket using either the request body or the headers. For example, if you have an existing application that updates a bucket ACL using the request body, then you can continue to use that approach.  If your bucket uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. You must use policies to grant access to your bucket and the objects in it. Requests to set ACLs or update ACLs fail and return the AccessControlListNotSupported error code. Requests to read ACLs are still supported. For more information, see Controlling object ownership in the Amazon S3 User Guide.   Permissions  You can set access permissions using one of the following methods:   Specify a canned ACL with the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. Specify the canned ACL name as the value of x-amz-acl. If you use this header, you cannot use other access control-specific headers in your request. For more information, see Canned ACL.   Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. When using these headers, you specify explicit access permissions and grantees (Amazon Web Services accounts or Amazon S3 groups) who will receive the permission. If you use these ACL-specific headers, you cannot use the x-amz-acl header to set a canned ACL. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview. You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-write header grants create, overwrite, and delete objects permission to LogDelivery group predefined by Amazon S3 and two Amazon Web Services accounts identified by their email addresses.  x-amz-grant-write: uri="http://acs.amazonaws.com/groups/s3/LogDelivery", id="111122223333", id="555566667777"     You can use either a canned ACL or specify access permissions explicitly. You cannot do both.  Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;  DisplayName is optional and ignored in the request   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;    By Email address:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;&amp;&lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.   Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.      The following operations are related to PutBucketAcl:    CreateBucket     DeleteBucket     GetObjectAcl   
+   * Sets the permissions on an existing bucket using access control lists (ACL). For more information, see Using ACLs. To set the ACL of a bucket, you must have WRITE_ACP permission. You can use one of the following two ways to set a bucket's permissions:   Specify the ACL in the request body   Specify permissions using request headers    You cannot specify access permission using both the body and the request headers.  Depending on your application needs, you may choose to set the ACL on a bucket using either the request body or the headers. For example, if you have an existing application that updates a bucket ACL using the request body, then you can continue to use that approach.  If your bucket uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. You must use policies to grant access to your bucket and the objects in it. Requests to set ACLs or update ACLs fail and return the AccessControlListNotSupported error code. Requests to read ACLs are still supported. For more information, see Controlling object ownership in the Amazon S3 User Guide.   Permissions  You can set access permissions by using one of the following methods:   Specify a canned ACL with the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. Specify the canned ACL name as the value of x-amz-acl. If you use this header, you cannot use other access control-specific headers in your request. For more information, see Canned ACL.   Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. When using these headers, you specify explicit access permissions and grantees (Amazon Web Services accounts or Amazon S3 groups) who will receive the permission. If you use these ACL-specific headers, you cannot use the x-amz-acl header to set a canned ACL. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview. You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-write header grants create, overwrite, and delete objects permission to LogDelivery group predefined by Amazon S3 and two Amazon Web Services accounts identified by their email addresses.  x-amz-grant-write: uri="http://acs.amazonaws.com/groups/s3/LogDelivery", id="111122223333", id="555566667777"     You can use either a canned ACL or specify access permissions explicitly. You cannot do both.  Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;  DisplayName is optional and ignored in the request   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;    By Email address:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;&amp;&lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.   Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.      The following operations are related to PutBucketAcl:    CreateBucket     DeleteBucket     GetObjectAcl   
    */
   putBucketAcl(params: S3.Types.PutBucketAclRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Sets the permissions on an existing bucket using access control lists (ACL). For more information, see Using ACLs. To set the ACL of a bucket, you must have WRITE_ACP permission. You can use one of the following two ways to set a bucket's permissions:   Specify the ACL in the request body   Specify permissions using request headers    You cannot specify access permission using both the body and the request headers.  Depending on your application needs, you may choose to set the ACL on a bucket using either the request body or the headers. For example, if you have an existing application that updates a bucket ACL using the request body, then you can continue to use that approach.  If your bucket uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. You must use policies to grant access to your bucket and the objects in it. Requests to set ACLs or update ACLs fail and return the AccessControlListNotSupported error code. Requests to read ACLs are still supported. For more information, see Controlling object ownership in the Amazon S3 User Guide.   Permissions  You can set access permissions using one of the following methods:   Specify a canned ACL with the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. Specify the canned ACL name as the value of x-amz-acl. If you use this header, you cannot use other access control-specific headers in your request. For more information, see Canned ACL.   Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. When using these headers, you specify explicit access permissions and grantees (Amazon Web Services accounts or Amazon S3 groups) who will receive the permission. If you use these ACL-specific headers, you cannot use the x-amz-acl header to set a canned ACL. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview. You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-write header grants create, overwrite, and delete objects permission to LogDelivery group predefined by Amazon S3 and two Amazon Web Services accounts identified by their email addresses.  x-amz-grant-write: uri="http://acs.amazonaws.com/groups/s3/LogDelivery", id="111122223333", id="555566667777"     You can use either a canned ACL or specify access permissions explicitly. You cannot do both.  Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;  DisplayName is optional and ignored in the request   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;    By Email address:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;&amp;&lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.   Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.      The following operations are related to PutBucketAcl:    CreateBucket     DeleteBucket     GetObjectAcl   
+   * Sets the permissions on an existing bucket using access control lists (ACL). For more information, see Using ACLs. To set the ACL of a bucket, you must have WRITE_ACP permission. You can use one of the following two ways to set a bucket's permissions:   Specify the ACL in the request body   Specify permissions using request headers    You cannot specify access permission using both the body and the request headers.  Depending on your application needs, you may choose to set the ACL on a bucket using either the request body or the headers. For example, if you have an existing application that updates a bucket ACL using the request body, then you can continue to use that approach.  If your bucket uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. You must use policies to grant access to your bucket and the objects in it. Requests to set ACLs or update ACLs fail and return the AccessControlListNotSupported error code. Requests to read ACLs are still supported. For more information, see Controlling object ownership in the Amazon S3 User Guide.   Permissions  You can set access permissions by using one of the following methods:   Specify a canned ACL with the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. Specify the canned ACL name as the value of x-amz-acl. If you use this header, you cannot use other access control-specific headers in your request. For more information, see Canned ACL.   Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. When using these headers, you specify explicit access permissions and grantees (Amazon Web Services accounts or Amazon S3 groups) who will receive the permission. If you use these ACL-specific headers, you cannot use the x-amz-acl header to set a canned ACL. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview. You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-write header grants create, overwrite, and delete objects permission to LogDelivery group predefined by Amazon S3 and two Amazon Web Services accounts identified by their email addresses.  x-amz-grant-write: uri="http://acs.amazonaws.com/groups/s3/LogDelivery", id="111122223333", id="555566667777"     You can use either a canned ACL or specify access permissions explicitly. You cannot do both.  Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;  DisplayName is optional and ignored in the request   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;    By Email address:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;&amp;&lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.   Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.      The following operations are related to PutBucketAcl:    CreateBucket     DeleteBucket     GetObjectAcl   
    */
   putBucketAcl(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -566,11 +566,11 @@ declare class S3 extends S3Customizations {
    */
   putBucketCors(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * This action uses the encryption subresource to configure default encryption and Amazon S3 Bucket Keys for an existing bucket. By default, all buckets have a default encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). You can optionally configure default encryption for a bucket by using server-side encryption with an Amazon Web Services KMS key (SSE-KMS) or a customer-provided key (SSE-C). If you specify default encryption by using SSE-KMS, you can also configure Amazon S3 Bucket Keys. For information about bucket default encryption, see Amazon S3 bucket default encryption in the Amazon S3 User Guide. For more information about S3 Bucket Keys, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  This action requires Amazon Web Services Signature Version 4. For more information, see  Authenticating Requests (Amazon Web Services Signature Version 4).   To use this operation, you must have permissions to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.  The following operations are related to PutBucketEncryption:    GetBucketEncryption     DeleteBucketEncryption   
+   * This action uses the encryption subresource to configure default encryption and Amazon S3 Bucket Keys for an existing bucket. By default, all buckets have a default encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). You can optionally configure default encryption for a bucket by using server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with customer-provided keys (SSE-C). If you specify default encryption by using SSE-KMS, you can also configure Amazon S3 Bucket Keys. For information about bucket default encryption, see Amazon S3 bucket default encryption in the Amazon S3 User Guide. For more information about S3 Bucket Keys, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  This action requires Amazon Web Services Signature Version 4. For more information, see  Authenticating Requests (Amazon Web Services Signature Version 4).   To use this operation, you must have permission to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.  The following operations are related to PutBucketEncryption:    GetBucketEncryption     DeleteBucketEncryption   
    */
   putBucketEncryption(params: S3.Types.PutBucketEncryptionRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * This action uses the encryption subresource to configure default encryption and Amazon S3 Bucket Keys for an existing bucket. By default, all buckets have a default encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). You can optionally configure default encryption for a bucket by using server-side encryption with an Amazon Web Services KMS key (SSE-KMS) or a customer-provided key (SSE-C). If you specify default encryption by using SSE-KMS, you can also configure Amazon S3 Bucket Keys. For information about bucket default encryption, see Amazon S3 bucket default encryption in the Amazon S3 User Guide. For more information about S3 Bucket Keys, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  This action requires Amazon Web Services Signature Version 4. For more information, see  Authenticating Requests (Amazon Web Services Signature Version 4).   To use this operation, you must have permissions to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.  The following operations are related to PutBucketEncryption:    GetBucketEncryption     DeleteBucketEncryption   
+   * This action uses the encryption subresource to configure default encryption and Amazon S3 Bucket Keys for an existing bucket. By default, all buckets have a default encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). You can optionally configure default encryption for a bucket by using server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with customer-provided keys (SSE-C). If you specify default encryption by using SSE-KMS, you can also configure Amazon S3 Bucket Keys. For information about bucket default encryption, see Amazon S3 bucket default encryption in the Amazon S3 User Guide. For more information about S3 Bucket Keys, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  This action requires Amazon Web Services Signature Version 4. For more information, see  Authenticating Requests (Amazon Web Services Signature Version 4).   To use this operation, you must have permission to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.  The following operations are related to PutBucketEncryption:    GetBucketEncryption     DeleteBucketEncryption   
    */
   putBucketEncryption(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -598,27 +598,27 @@ declare class S3 extends S3Customizations {
    */
   putBucketLifecycle(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Creates a new lifecycle configuration for the bucket or replaces an existing lifecycle configuration. Keep in mind that this will overwrite an existing lifecycle configuration, so if you want to retain any configuration details, they must be included in the new lifecycle configuration. For information about lifecycle configuration, see Managing your storage lifecycle.  Bucket lifecycle configuration now supports specifying a lifecycle rule using an object key name prefix, one or more object tags, or a combination of both. Accordingly, this section describes the latest API. The previous version of the API supported filtering based only on an object key name prefix, which is supported for backward compatibility. For the related API description, see PutBucketLifecycle.   Rules  You specify the lifecycle configuration in your request body. The lifecycle configuration is specified as XML consisting of one or more rules. An Amazon S3 Lifecycle configuration can have up to 1,000 rules. This limit is not adjustable. Each rule consists of the following:   Filter identifying a subset of objects to which the rule applies. The filter can be based on a key name prefix, object tags, or a combination of both.   Status whether the rule is in effect.   One or more lifecycle transition and expiration actions that you want Amazon S3 to perform on the objects identified by the filter. If the state of your bucket is versioning-enabled or versioning-suspended, you can have many versions of the same object (one current version and zero or more noncurrent versions). Amazon S3 provides predefined actions that you can specify for current and noncurrent object versions.   For more information, see Object Lifecycle Management and Lifecycle Configuration Elements.  Permissions  By default, all Amazon S3 resources are private, including buckets, objects, and related subresources (for example, lifecycle configuration and website configuration). Only the resource owner (that is, the Amazon Web Services account that created it) can access the resource. The resource owner can optionally grant access permissions to others by writing an access policy. For this operation, a user must get the s3:PutLifecycleConfiguration permission. You can also explicitly deny permissions. Explicit deny also supersedes any other permissions. If you want to block users or accounts from removing or deleting objects from your bucket, you must deny them permissions for the following actions:    s3:DeleteObject     s3:DeleteObjectVersion     s3:PutLifecycleConfiguration    For more information about permissions, see Managing Access Permissions to Your Amazon S3 Resources.   The following operations are related to PutBucketLifecycleConfiguration:    Examples of Lifecycle Configuration     GetBucketLifecycleConfiguration     DeleteBucketLifecycle   
+   * Creates a new lifecycle configuration for the bucket or replaces an existing lifecycle configuration. Keep in mind that this will overwrite an existing lifecycle configuration, so if you want to retain any configuration details, they must be included in the new lifecycle configuration. For information about lifecycle configuration, see Managing your storage lifecycle.  Bucket lifecycle configuration now supports specifying a lifecycle rule using an object key name prefix, one or more object tags, or a combination of both. Accordingly, this section describes the latest API. The previous version of the API supported filtering based only on an object key name prefix, which is supported for backward compatibility. For the related API description, see PutBucketLifecycle.   Rules  You specify the lifecycle configuration in your request body. The lifecycle configuration is specified as XML consisting of one or more rules. An Amazon S3 Lifecycle configuration can have up to 1,000 rules. This limit is not adjustable. Each rule consists of the following:   A filter identifying a subset of objects to which the rule applies. The filter can be based on a key name prefix, object tags, or a combination of both.   A status indicating whether the rule is in effect.   One or more lifecycle transition and expiration actions that you want Amazon S3 to perform on the objects identified by the filter. If the state of your bucket is versioning-enabled or versioning-suspended, you can have many versions of the same object (one current version and zero or more noncurrent versions). Amazon S3 provides predefined actions that you can specify for current and noncurrent object versions.   For more information, see Object Lifecycle Management and Lifecycle Configuration Elements.  Permissions  By default, all Amazon S3 resources are private, including buckets, objects, and related subresources (for example, lifecycle configuration and website configuration). Only the resource owner (that is, the Amazon Web Services account that created it) can access the resource. The resource owner can optionally grant access permissions to others by writing an access policy. For this operation, a user must get the s3:PutLifecycleConfiguration permission. You can also explicitly deny permissions. An explicit deny also supersedes any other permissions. If you want to block users or accounts from removing or deleting objects from your bucket, you must deny them permissions for the following actions:    s3:DeleteObject     s3:DeleteObjectVersion     s3:PutLifecycleConfiguration    For more information about permissions, see Managing Access Permissions to Your Amazon S3 Resources.   The following operations are related to PutBucketLifecycleConfiguration:    Examples of Lifecycle Configuration     GetBucketLifecycleConfiguration     DeleteBucketLifecycle   
    */
   putBucketLifecycleConfiguration(params: S3.Types.PutBucketLifecycleConfigurationRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Creates a new lifecycle configuration for the bucket or replaces an existing lifecycle configuration. Keep in mind that this will overwrite an existing lifecycle configuration, so if you want to retain any configuration details, they must be included in the new lifecycle configuration. For information about lifecycle configuration, see Managing your storage lifecycle.  Bucket lifecycle configuration now supports specifying a lifecycle rule using an object key name prefix, one or more object tags, or a combination of both. Accordingly, this section describes the latest API. The previous version of the API supported filtering based only on an object key name prefix, which is supported for backward compatibility. For the related API description, see PutBucketLifecycle.   Rules  You specify the lifecycle configuration in your request body. The lifecycle configuration is specified as XML consisting of one or more rules. An Amazon S3 Lifecycle configuration can have up to 1,000 rules. This limit is not adjustable. Each rule consists of the following:   Filter identifying a subset of objects to which the rule applies. The filter can be based on a key name prefix, object tags, or a combination of both.   Status whether the rule is in effect.   One or more lifecycle transition and expiration actions that you want Amazon S3 to perform on the objects identified by the filter. If the state of your bucket is versioning-enabled or versioning-suspended, you can have many versions of the same object (one current version and zero or more noncurrent versions). Amazon S3 provides predefined actions that you can specify for current and noncurrent object versions.   For more information, see Object Lifecycle Management and Lifecycle Configuration Elements.  Permissions  By default, all Amazon S3 resources are private, including buckets, objects, and related subresources (for example, lifecycle configuration and website configuration). Only the resource owner (that is, the Amazon Web Services account that created it) can access the resource. The resource owner can optionally grant access permissions to others by writing an access policy. For this operation, a user must get the s3:PutLifecycleConfiguration permission. You can also explicitly deny permissions. Explicit deny also supersedes any other permissions. If you want to block users or accounts from removing or deleting objects from your bucket, you must deny them permissions for the following actions:    s3:DeleteObject     s3:DeleteObjectVersion     s3:PutLifecycleConfiguration    For more information about permissions, see Managing Access Permissions to Your Amazon S3 Resources.   The following operations are related to PutBucketLifecycleConfiguration:    Examples of Lifecycle Configuration     GetBucketLifecycleConfiguration     DeleteBucketLifecycle   
+   * Creates a new lifecycle configuration for the bucket or replaces an existing lifecycle configuration. Keep in mind that this will overwrite an existing lifecycle configuration, so if you want to retain any configuration details, they must be included in the new lifecycle configuration. For information about lifecycle configuration, see Managing your storage lifecycle.  Bucket lifecycle configuration now supports specifying a lifecycle rule using an object key name prefix, one or more object tags, or a combination of both. Accordingly, this section describes the latest API. The previous version of the API supported filtering based only on an object key name prefix, which is supported for backward compatibility. For the related API description, see PutBucketLifecycle.   Rules  You specify the lifecycle configuration in your request body. The lifecycle configuration is specified as XML consisting of one or more rules. An Amazon S3 Lifecycle configuration can have up to 1,000 rules. This limit is not adjustable. Each rule consists of the following:   A filter identifying a subset of objects to which the rule applies. The filter can be based on a key name prefix, object tags, or a combination of both.   A status indicating whether the rule is in effect.   One or more lifecycle transition and expiration actions that you want Amazon S3 to perform on the objects identified by the filter. If the state of your bucket is versioning-enabled or versioning-suspended, you can have many versions of the same object (one current version and zero or more noncurrent versions). Amazon S3 provides predefined actions that you can specify for current and noncurrent object versions.   For more information, see Object Lifecycle Management and Lifecycle Configuration Elements.  Permissions  By default, all Amazon S3 resources are private, including buckets, objects, and related subresources (for example, lifecycle configuration and website configuration). Only the resource owner (that is, the Amazon Web Services account that created it) can access the resource. The resource owner can optionally grant access permissions to others by writing an access policy. For this operation, a user must get the s3:PutLifecycleConfiguration permission. You can also explicitly deny permissions. An explicit deny also supersedes any other permissions. If you want to block users or accounts from removing or deleting objects from your bucket, you must deny them permissions for the following actions:    s3:DeleteObject     s3:DeleteObjectVersion     s3:PutLifecycleConfiguration    For more information about permissions, see Managing Access Permissions to Your Amazon S3 Resources.   The following operations are related to PutBucketLifecycleConfiguration:    Examples of Lifecycle Configuration     GetBucketLifecycleConfiguration     DeleteBucketLifecycle   
    */
   putBucketLifecycleConfiguration(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Set the logging parameters for a bucket and to specify permissions for who can view and modify the logging parameters. All logs are saved to buckets in the same Amazon Web Services Region as the source bucket. To set the logging status of a bucket, you must be the bucket owner. The bucket owner is automatically granted FULL_CONTROL to all logs. You use the Grantee request element to grant access to other people. The Permissions request element specifies the kind of access the grantee has to the logs.  If the target bucket for log delivery uses the bucket owner enforced setting for S3 Object Ownership, you can't use the Grantee request element to grant access to others. Permissions can only be granted using policies. For more information, see Permissions for server access log delivery in the Amazon S3 User Guide.   Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;  DisplayName is optional and ignored in the request.   By Email address:   &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;&lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;      To enable logging, you use LoggingEnabled and its children request elements. To disable logging, you use an empty BucketLoggingStatus request element:  &lt;BucketLoggingStatus xmlns="http://doc.s3.amazonaws.com/2006-03-01" /&gt;  For more information about server access logging, see Server Access Logging in the Amazon S3 User Guide.  For more information about creating a bucket, see CreateBucket. For more information about returning the logging status of a bucket, see GetBucketLogging. The following operations are related to PutBucketLogging:    PutObject     DeleteBucket     CreateBucket     GetBucketLogging   
+   * Set the logging parameters for a bucket and to specify permissions for who can view and modify the logging parameters. All logs are saved to buckets in the same Amazon Web Services Region as the source bucket. To set the logging status of a bucket, you must be the bucket owner. The bucket owner is automatically granted FULL_CONTROL to all logs. You use the Grantee request element to grant access to other people. The Permissions request element specifies the kind of access the grantee has to the logs.  If the target bucket for log delivery uses the bucket owner enforced setting for S3 Object Ownership, you can't use the Grantee request element to grant access to others. Permissions can only be granted using policies. For more information, see Permissions for server access log delivery in the Amazon S3 User Guide.   Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (by using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;   DisplayName is optional and ignored in the request.   By Email address:   &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;&lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GETObjectAcl request, appears as the CanonicalUser.   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;      To enable logging, you use LoggingEnabled and its children request elements. To disable logging, you use an empty BucketLoggingStatus request element:  &lt;BucketLoggingStatus xmlns="http://doc.s3.amazonaws.com/2006-03-01" /&gt;  For more information about server access logging, see Server Access Logging in the Amazon S3 User Guide.  For more information about creating a bucket, see CreateBucket. For more information about returning the logging status of a bucket, see GetBucketLogging. The following operations are related to PutBucketLogging:    PutObject     DeleteBucket     CreateBucket     GetBucketLogging   
    */
   putBucketLogging(params: S3.Types.PutBucketLoggingRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Set the logging parameters for a bucket and to specify permissions for who can view and modify the logging parameters. All logs are saved to buckets in the same Amazon Web Services Region as the source bucket. To set the logging status of a bucket, you must be the bucket owner. The bucket owner is automatically granted FULL_CONTROL to all logs. You use the Grantee request element to grant access to other people. The Permissions request element specifies the kind of access the grantee has to the logs.  If the target bucket for log delivery uses the bucket owner enforced setting for S3 Object Ownership, you can't use the Grantee request element to grant access to others. Permissions can only be granted using policies. For more information, see Permissions for server access log delivery in the Amazon S3 User Guide.   Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;  DisplayName is optional and ignored in the request.   By Email address:   &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;&lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;      To enable logging, you use LoggingEnabled and its children request elements. To disable logging, you use an empty BucketLoggingStatus request element:  &lt;BucketLoggingStatus xmlns="http://doc.s3.amazonaws.com/2006-03-01" /&gt;  For more information about server access logging, see Server Access Logging in the Amazon S3 User Guide.  For more information about creating a bucket, see CreateBucket. For more information about returning the logging status of a bucket, see GetBucketLogging. The following operations are related to PutBucketLogging:    PutObject     DeleteBucket     CreateBucket     GetBucketLogging   
+   * Set the logging parameters for a bucket and to specify permissions for who can view and modify the logging parameters. All logs are saved to buckets in the same Amazon Web Services Region as the source bucket. To set the logging status of a bucket, you must be the bucket owner. The bucket owner is automatically granted FULL_CONTROL to all logs. You use the Grantee request element to grant access to other people. The Permissions request element specifies the kind of access the grantee has to the logs.  If the target bucket for log delivery uses the bucket owner enforced setting for S3 Object Ownership, you can't use the Grantee request element to grant access to others. Permissions can only be granted using policies. For more information, see Permissions for server access log delivery in the Amazon S3 User Guide.   Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (by using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;   DisplayName is optional and ignored in the request.   By Email address:   &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;&lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GETObjectAcl request, appears as the CanonicalUser.   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;      To enable logging, you use LoggingEnabled and its children request elements. To disable logging, you use an empty BucketLoggingStatus request element:  &lt;BucketLoggingStatus xmlns="http://doc.s3.amazonaws.com/2006-03-01" /&gt;  For more information about server access logging, see Server Access Logging in the Amazon S3 User Guide.  For more information about creating a bucket, see CreateBucket. For more information about returning the logging status of a bucket, see GetBucketLogging. The following operations are related to PutBucketLogging:    PutObject     DeleteBucket     CreateBucket     GetBucketLogging   
    */
   putBucketLogging(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Sets a metrics configuration (specified by the metrics configuration ID) for the bucket. You can have up to 1,000 metrics configurations per bucket. If you're updating an existing metrics configuration, note that this is a full replacement of the existing metrics configuration. If you don't include the elements you want to keep, they are erased. To use this operation, you must have permissions to perform the s3:PutMetricsConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources. For information about CloudWatch request metrics for Amazon S3, see Monitoring Metrics with Amazon CloudWatch. The following operations are related to PutBucketMetricsConfiguration:    DeleteBucketMetricsConfiguration     GetBucketMetricsConfiguration     ListBucketMetricsConfigurations     GetBucketLifecycle has the following special error:   Error code: TooManyConfigurations    Description: You are attempting to create a new configuration but have already reached the 1,000-configuration limit.   HTTP Status Code: HTTP 400 Bad Request    
+   * Sets a metrics configuration (specified by the metrics configuration ID) for the bucket. You can have up to 1,000 metrics configurations per bucket. If you're updating an existing metrics configuration, note that this is a full replacement of the existing metrics configuration. If you don't include the elements you want to keep, they are erased. To use this operation, you must have permissions to perform the s3:PutMetricsConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources. For information about CloudWatch request metrics for Amazon S3, see Monitoring Metrics with Amazon CloudWatch. The following operations are related to PutBucketMetricsConfiguration:    DeleteBucketMetricsConfiguration     GetBucketMetricsConfiguration     ListBucketMetricsConfigurations     PutBucketMetricsConfiguration has the following special error:   Error code: TooManyConfigurations    Description: You are attempting to create a new configuration but have already reached the 1,000-configuration limit.   HTTP Status Code: HTTP 400 Bad Request    
    */
   putBucketMetricsConfiguration(params: S3.Types.PutBucketMetricsConfigurationRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Sets a metrics configuration (specified by the metrics configuration ID) for the bucket. You can have up to 1,000 metrics configurations per bucket. If you're updating an existing metrics configuration, note that this is a full replacement of the existing metrics configuration. If you don't include the elements you want to keep, they are erased. To use this operation, you must have permissions to perform the s3:PutMetricsConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources. For information about CloudWatch request metrics for Amazon S3, see Monitoring Metrics with Amazon CloudWatch. The following operations are related to PutBucketMetricsConfiguration:    DeleteBucketMetricsConfiguration     GetBucketMetricsConfiguration     ListBucketMetricsConfigurations     GetBucketLifecycle has the following special error:   Error code: TooManyConfigurations    Description: You are attempting to create a new configuration but have already reached the 1,000-configuration limit.   HTTP Status Code: HTTP 400 Bad Request    
+   * Sets a metrics configuration (specified by the metrics configuration ID) for the bucket. You can have up to 1,000 metrics configurations per bucket. If you're updating an existing metrics configuration, note that this is a full replacement of the existing metrics configuration. If you don't include the elements you want to keep, they are erased. To use this operation, you must have permissions to perform the s3:PutMetricsConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources. For information about CloudWatch request metrics for Amazon S3, see Monitoring Metrics with Amazon CloudWatch. The following operations are related to PutBucketMetricsConfiguration:    DeleteBucketMetricsConfiguration     GetBucketMetricsConfiguration     ListBucketMetricsConfigurations     PutBucketMetricsConfiguration has the following special error:   Error code: TooManyConfigurations    Description: You are attempting to create a new configuration but have already reached the 1,000-configuration limit.   HTTP Status Code: HTTP 400 Bad Request    
    */
   putBucketMetricsConfiguration(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -630,11 +630,11 @@ declare class S3 extends S3Customizations {
    */
   putBucketNotification(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Enables notifications of specified events for a bucket. For more information about event notifications, see Configuring Event Notifications. Using this API, you can replace an existing notification configuration. The configuration is an XML file that defines the event types that you want Amazon S3 to publish and the destination where you want Amazon S3 to publish an event notification when it detects an event of the specified type. By default, your bucket has no event notifications configured. That is, the notification configuration will be an empty NotificationConfiguration.  &lt;NotificationConfiguration&gt;   &lt;/NotificationConfiguration&gt;  This action replaces the existing notification configuration with the configuration you include in the request body. After Amazon S3 receives this request, it first verifies that any Amazon Simple Notification Service (Amazon SNS) or Amazon Simple Queue Service (Amazon SQS) destination exists, and that the bucket owner has permission to publish to it by sending a test notification. In the case of Lambda destinations, Amazon S3 verifies that the Lambda function permissions grant Amazon S3 permission to invoke the function from the Amazon S3 bucket. For more information, see Configuring Notifications for Amazon S3 Events. You can disable notifications by adding the empty NotificationConfiguration element. For more information about the number of event notification configurations that you can create per bucket, see Amazon S3 service quotas in Amazon Web Services General Reference. By default, only the bucket owner can configure notifications on a bucket. However, bucket owners can use a bucket policy to grant permission to other users to set this configuration with s3:PutBucketNotification permission.  The PUT notification is an atomic operation. For example, suppose your notification configuration includes SNS topic, SQS queue, and Lambda function configurations. When you send a PUT request with this configuration, Amazon S3 sends test messages to your SNS topic. If the message fails, the entire PUT action will fail, and Amazon S3 will not add the configuration to your bucket.  If the configuration in the request body includes only one TopicConfiguration specifying only the s3:ReducedRedundancyLostObject event type, the response will also include the x-amz-sns-test-message-id header containing the message ID of the test notification sent to the topic. The following action is related to PutBucketNotificationConfiguration:    GetBucketNotificationConfiguration   
+   * Enables notifications of specified events for a bucket. For more information about event notifications, see Configuring Event Notifications. Using this API, you can replace an existing notification configuration. The configuration is an XML file that defines the event types that you want Amazon S3 to publish and the destination where you want Amazon S3 to publish an event notification when it detects an event of the specified type. By default, your bucket has no event notifications configured. That is, the notification configuration will be an empty NotificationConfiguration.  &lt;NotificationConfiguration&gt;   &lt;/NotificationConfiguration&gt;  This action replaces the existing notification configuration with the configuration you include in the request body. After Amazon S3 receives this request, it first verifies that any Amazon Simple Notification Service (Amazon SNS) or Amazon Simple Queue Service (Amazon SQS) destination exists, and that the bucket owner has permission to publish to it by sending a test notification. In the case of Lambda destinations, Amazon S3 verifies that the Lambda function permissions grant Amazon S3 permission to invoke the function from the Amazon S3 bucket. For more information, see Configuring Notifications for Amazon S3 Events. You can disable notifications by adding the empty NotificationConfiguration element. For more information about the number of event notification configurations that you can create per bucket, see Amazon S3 service quotas in Amazon Web Services General Reference. By default, only the bucket owner can configure notifications on a bucket. However, bucket owners can use a bucket policy to grant permission to other users to set this configuration with the required s3:PutBucketNotification permission.  The PUT notification is an atomic operation. For example, suppose your notification configuration includes SNS topic, SQS queue, and Lambda function configurations. When you send a PUT request with this configuration, Amazon S3 sends test messages to your SNS topic. If the message fails, the entire PUT action will fail, and Amazon S3 will not add the configuration to your bucket.  If the configuration in the request body includes only one TopicConfiguration specifying only the s3:ReducedRedundancyLostObject event type, the response will also include the x-amz-sns-test-message-id header containing the message ID of the test notification sent to the topic. The following action is related to PutBucketNotificationConfiguration:    GetBucketNotificationConfiguration   
    */
   putBucketNotificationConfiguration(params: S3.Types.PutBucketNotificationConfigurationRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Enables notifications of specified events for a bucket. For more information about event notifications, see Configuring Event Notifications. Using this API, you can replace an existing notification configuration. The configuration is an XML file that defines the event types that you want Amazon S3 to publish and the destination where you want Amazon S3 to publish an event notification when it detects an event of the specified type. By default, your bucket has no event notifications configured. That is, the notification configuration will be an empty NotificationConfiguration.  &lt;NotificationConfiguration&gt;   &lt;/NotificationConfiguration&gt;  This action replaces the existing notification configuration with the configuration you include in the request body. After Amazon S3 receives this request, it first verifies that any Amazon Simple Notification Service (Amazon SNS) or Amazon Simple Queue Service (Amazon SQS) destination exists, and that the bucket owner has permission to publish to it by sending a test notification. In the case of Lambda destinations, Amazon S3 verifies that the Lambda function permissions grant Amazon S3 permission to invoke the function from the Amazon S3 bucket. For more information, see Configuring Notifications for Amazon S3 Events. You can disable notifications by adding the empty NotificationConfiguration element. For more information about the number of event notification configurations that you can create per bucket, see Amazon S3 service quotas in Amazon Web Services General Reference. By default, only the bucket owner can configure notifications on a bucket. However, bucket owners can use a bucket policy to grant permission to other users to set this configuration with s3:PutBucketNotification permission.  The PUT notification is an atomic operation. For example, suppose your notification configuration includes SNS topic, SQS queue, and Lambda function configurations. When you send a PUT request with this configuration, Amazon S3 sends test messages to your SNS topic. If the message fails, the entire PUT action will fail, and Amazon S3 will not add the configuration to your bucket.  If the configuration in the request body includes only one TopicConfiguration specifying only the s3:ReducedRedundancyLostObject event type, the response will also include the x-amz-sns-test-message-id header containing the message ID of the test notification sent to the topic. The following action is related to PutBucketNotificationConfiguration:    GetBucketNotificationConfiguration   
+   * Enables notifications of specified events for a bucket. For more information about event notifications, see Configuring Event Notifications. Using this API, you can replace an existing notification configuration. The configuration is an XML file that defines the event types that you want Amazon S3 to publish and the destination where you want Amazon S3 to publish an event notification when it detects an event of the specified type. By default, your bucket has no event notifications configured. That is, the notification configuration will be an empty NotificationConfiguration.  &lt;NotificationConfiguration&gt;   &lt;/NotificationConfiguration&gt;  This action replaces the existing notification configuration with the configuration you include in the request body. After Amazon S3 receives this request, it first verifies that any Amazon Simple Notification Service (Amazon SNS) or Amazon Simple Queue Service (Amazon SQS) destination exists, and that the bucket owner has permission to publish to it by sending a test notification. In the case of Lambda destinations, Amazon S3 verifies that the Lambda function permissions grant Amazon S3 permission to invoke the function from the Amazon S3 bucket. For more information, see Configuring Notifications for Amazon S3 Events. You can disable notifications by adding the empty NotificationConfiguration element. For more information about the number of event notification configurations that you can create per bucket, see Amazon S3 service quotas in Amazon Web Services General Reference. By default, only the bucket owner can configure notifications on a bucket. However, bucket owners can use a bucket policy to grant permission to other users to set this configuration with the required s3:PutBucketNotification permission.  The PUT notification is an atomic operation. For example, suppose your notification configuration includes SNS topic, SQS queue, and Lambda function configurations. When you send a PUT request with this configuration, Amazon S3 sends test messages to your SNS topic. If the message fails, the entire PUT action will fail, and Amazon S3 will not add the configuration to your bucket.  If the configuration in the request body includes only one TopicConfiguration specifying only the s3:ReducedRedundancyLostObject event type, the response will also include the x-amz-sns-test-message-id header containing the message ID of the test notification sent to the topic. The following action is related to PutBucketNotificationConfiguration:    GetBucketNotificationConfiguration   
    */
   putBucketNotificationConfiguration(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -694,11 +694,11 @@ declare class S3 extends S3Customizations {
    */
   putBucketWebsite(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Adds an object to a bucket. You must have WRITE permissions on a bucket to add an object to it.  Amazon S3 never adds partial objects; if you receive a success response, Amazon S3 added the entire object to the bucket. You cannot use PutObject to only update a single piece of metadata for an existing object. You must put the entire object with updated metadata if you want to update some values.  Amazon S3 is a distributed system. If it receives multiple write requests for the same object simultaneously, it overwrites all but the last object written. To prevent objects from being deleted or overwritten, you can use Amazon S3 Object Lock. To ensure that data is not corrupted traversing the network, use the Content-MD5 header. When you use this header, Amazon S3 checks the object against the provided MD5 value and, if they do not match, returns an error. Additionally, you can calculate the MD5 while putting an object to Amazon S3 and compare the returned ETag to the calculated MD5 value.    To successfully complete the PutObject request, you must have the s3:PutObject in your IAM permissions.   To successfully change the objects acl of your PutObject request, you must have the s3:PutObjectAcl in your IAM permissions.   To successfully set the tag-set with your PutObject request, you must have the s3:PutObjectTagging in your IAM permissions.    The Content-MD5 header is required for any request to upload an object with a retention period configured using Amazon S3 Object Lock. For more information about Amazon S3 Object Lock, see Amazon S3 Object Lock Overview in the Amazon S3 User Guide.     You have three mutually exclusive options to protect data using server-side encryption in Amazon S3, depending on how you choose to manage the encryption keys. Specifically, the encryption key options are Amazon S3 managed keys (SSE-S3), Amazon Web Services KMS keys (SSE-KMS), and customer-provided keys (SSE-C). Amazon S3 encrypts data with server-side encryption by using Amazon S3 managed keys (SSE-S3) by default. You can optionally tell Amazon S3 to encrypt data at by rest using server-side encryption with other key options. For more information, see Using Server-Side Encryption. When adding a new object, you can use headers to grant ACL-based permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. By default, all objects are private. Only the owner has full access control. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.  If the bucket that you're uploading objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. PUT requests that contain other ACLs (for example, custom grants to certain Amazon Web Services accounts) fail and return a 400 error with the error code AccessControlListNotSupported. For more information, see  Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.  If your bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.  By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide. If you enable versioning for a bucket, Amazon S3 automatically generates a unique version ID for the object being stored. Amazon S3 returns this ID in the response. When you enable versioning for a bucket, if Amazon S3 receives multiple write requests for the same object simultaneously, it stores all of the objects. For more information about versioning, see Adding Objects to Versioning-Enabled Buckets. For information about returning the versioning state of a bucket, see GetBucketVersioning.  For more information about related Amazon S3 APIs, see the following:    CopyObject     DeleteObject   
+   * Adds an object to a bucket. You must have WRITE permissions on a bucket to add an object to it.  Amazon S3 never adds partial objects; if you receive a success response, Amazon S3 added the entire object to the bucket. You cannot use PutObject to only update a single piece of metadata for an existing object. You must put the entire object with updated metadata if you want to update some values.  Amazon S3 is a distributed system. If it receives multiple write requests for the same object simultaneously, it overwrites all but the last object written. To prevent objects from being deleted or overwritten, you can use Amazon S3 Object Lock. To ensure that data is not corrupted traversing the network, use the Content-MD5 header. When you use this header, Amazon S3 checks the object against the provided MD5 value and, if they do not match, returns an error. Additionally, you can calculate the MD5 while putting an object to Amazon S3 and compare the returned ETag to the calculated MD5 value.    To successfully complete the PutObject request, you must have the s3:PutObject in your IAM permissions.   To successfully change the objects acl of your PutObject request, you must have the s3:PutObjectAcl in your IAM permissions.   To successfully set the tag-set with your PutObject request, you must have the s3:PutObjectTagging in your IAM permissions.    The Content-MD5 header is required for any request to upload an object with a retention period configured using Amazon S3 Object Lock. For more information about Amazon S3 Object Lock, see Amazon S3 Object Lock Overview in the Amazon S3 User Guide.     You have four mutually exclusive options to protect data using server-side encryption in Amazon S3, depending on how you choose to manage the encryption keys. Specifically, the encryption key options are Amazon S3 managed keys (SSE-S3), Amazon Web Services KMS keys (SSE-KMS or DSSE-KMS), and customer-provided keys (SSE-C). Amazon S3 encrypts data with server-side encryption by using Amazon S3 managed keys (SSE-S3) by default. You can optionally tell Amazon S3 to encrypt data at rest by using server-side encryption with other key options. For more information, see Using Server-Side Encryption. When adding a new object, you can use headers to grant ACL-based permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. By default, all objects are private. Only the owner has full access control. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.  If the bucket that you're uploading objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. PUT requests that contain other ACLs (for example, custom grants to certain Amazon Web Services accounts) fail and return a 400 error with the error code AccessControlListNotSupported. For more information, see  Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.  If your bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.  By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide. If you enable versioning for a bucket, Amazon S3 automatically generates a unique version ID for the object being stored. Amazon S3 returns this ID in the response. When you enable versioning for a bucket, if Amazon S3 receives multiple write requests for the same object simultaneously, it stores all of the objects. For more information about versioning, see Adding Objects to Versioning-Enabled Buckets. For information about returning the versioning state of a bucket, see GetBucketVersioning.  For more information about related Amazon S3 APIs, see the following:    CopyObject     DeleteObject   
    */
   putObject(params: S3.Types.PutObjectRequest, callback?: (err: AWSError, data: S3.Types.PutObjectOutput) => void): Request<S3.Types.PutObjectOutput, AWSError>;
   /**
-   * Adds an object to a bucket. You must have WRITE permissions on a bucket to add an object to it.  Amazon S3 never adds partial objects; if you receive a success response, Amazon S3 added the entire object to the bucket. You cannot use PutObject to only update a single piece of metadata for an existing object. You must put the entire object with updated metadata if you want to update some values.  Amazon S3 is a distributed system. If it receives multiple write requests for the same object simultaneously, it overwrites all but the last object written. To prevent objects from being deleted or overwritten, you can use Amazon S3 Object Lock. To ensure that data is not corrupted traversing the network, use the Content-MD5 header. When you use this header, Amazon S3 checks the object against the provided MD5 value and, if they do not match, returns an error. Additionally, you can calculate the MD5 while putting an object to Amazon S3 and compare the returned ETag to the calculated MD5 value.    To successfully complete the PutObject request, you must have the s3:PutObject in your IAM permissions.   To successfully change the objects acl of your PutObject request, you must have the s3:PutObjectAcl in your IAM permissions.   To successfully set the tag-set with your PutObject request, you must have the s3:PutObjectTagging in your IAM permissions.    The Content-MD5 header is required for any request to upload an object with a retention period configured using Amazon S3 Object Lock. For more information about Amazon S3 Object Lock, see Amazon S3 Object Lock Overview in the Amazon S3 User Guide.     You have three mutually exclusive options to protect data using server-side encryption in Amazon S3, depending on how you choose to manage the encryption keys. Specifically, the encryption key options are Amazon S3 managed keys (SSE-S3), Amazon Web Services KMS keys (SSE-KMS), and customer-provided keys (SSE-C). Amazon S3 encrypts data with server-side encryption by using Amazon S3 managed keys (SSE-S3) by default. You can optionally tell Amazon S3 to encrypt data at by rest using server-side encryption with other key options. For more information, see Using Server-Side Encryption. When adding a new object, you can use headers to grant ACL-based permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. By default, all objects are private. Only the owner has full access control. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.  If the bucket that you're uploading objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. PUT requests that contain other ACLs (for example, custom grants to certain Amazon Web Services accounts) fail and return a 400 error with the error code AccessControlListNotSupported. For more information, see  Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.  If your bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.  By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide. If you enable versioning for a bucket, Amazon S3 automatically generates a unique version ID for the object being stored. Amazon S3 returns this ID in the response. When you enable versioning for a bucket, if Amazon S3 receives multiple write requests for the same object simultaneously, it stores all of the objects. For more information about versioning, see Adding Objects to Versioning-Enabled Buckets. For information about returning the versioning state of a bucket, see GetBucketVersioning.  For more information about related Amazon S3 APIs, see the following:    CopyObject     DeleteObject   
+   * Adds an object to a bucket. You must have WRITE permissions on a bucket to add an object to it.  Amazon S3 never adds partial objects; if you receive a success response, Amazon S3 added the entire object to the bucket. You cannot use PutObject to only update a single piece of metadata for an existing object. You must put the entire object with updated metadata if you want to update some values.  Amazon S3 is a distributed system. If it receives multiple write requests for the same object simultaneously, it overwrites all but the last object written. To prevent objects from being deleted or overwritten, you can use Amazon S3 Object Lock. To ensure that data is not corrupted traversing the network, use the Content-MD5 header. When you use this header, Amazon S3 checks the object against the provided MD5 value and, if they do not match, returns an error. Additionally, you can calculate the MD5 while putting an object to Amazon S3 and compare the returned ETag to the calculated MD5 value.    To successfully complete the PutObject request, you must have the s3:PutObject in your IAM permissions.   To successfully change the objects acl of your PutObject request, you must have the s3:PutObjectAcl in your IAM permissions.   To successfully set the tag-set with your PutObject request, you must have the s3:PutObjectTagging in your IAM permissions.    The Content-MD5 header is required for any request to upload an object with a retention period configured using Amazon S3 Object Lock. For more information about Amazon S3 Object Lock, see Amazon S3 Object Lock Overview in the Amazon S3 User Guide.     You have four mutually exclusive options to protect data using server-side encryption in Amazon S3, depending on how you choose to manage the encryption keys. Specifically, the encryption key options are Amazon S3 managed keys (SSE-S3), Amazon Web Services KMS keys (SSE-KMS or DSSE-KMS), and customer-provided keys (SSE-C). Amazon S3 encrypts data with server-side encryption by using Amazon S3 managed keys (SSE-S3) by default. You can optionally tell Amazon S3 to encrypt data at rest by using server-side encryption with other key options. For more information, see Using Server-Side Encryption. When adding a new object, you can use headers to grant ACL-based permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. By default, all objects are private. Only the owner has full access control. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.  If the bucket that you're uploading objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. PUT requests that contain other ACLs (for example, custom grants to certain Amazon Web Services accounts) fail and return a 400 error with the error code AccessControlListNotSupported. For more information, see  Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.  If your bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.  By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide. If you enable versioning for a bucket, Amazon S3 automatically generates a unique version ID for the object being stored. Amazon S3 returns this ID in the response. When you enable versioning for a bucket, if Amazon S3 receives multiple write requests for the same object simultaneously, it stores all of the objects. For more information about versioning, see Adding Objects to Versioning-Enabled Buckets. For information about returning the versioning state of a bucket, see GetBucketVersioning.  For more information about related Amazon S3 APIs, see the following:    CopyObject     DeleteObject   
    */
   putObject(callback?: (err: AWSError, data: S3.Types.PutObjectOutput) => void): Request<S3.Types.PutObjectOutput, AWSError>;
   /**
@@ -750,19 +750,19 @@ declare class S3 extends S3Customizations {
    */
   putPublicAccessBlock(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Restores an archived copy of an object back into Amazon S3 This action is not supported by Amazon S3 on Outposts. This action performs the following types of requests:     select - Perform a select query on an archived object    restore an archive - Restore an archived object   For more information about the S3 structure in the request body, see the following:    PutObject     Managing Access with ACLs in the Amazon S3 User Guide     Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide    Define the SQL expression for the SELECT type of restoration for your query in the request body's SelectParameters structure. You can use expressions like the following examples.   The following expression returns all records from the specified object.  SELECT * FROM Object    Assuming that you are not using any headers for data stored in the object, you can specify columns with positional headers.  SELECT s._1, s._2 FROM Object s WHERE s._3 &gt; 100    If you have headers and you set the fileHeaderInfo in the CSV structure in the request body to USE, you can specify headers in the query. (If you set the fileHeaderInfo field to IGNORE, the first row is skipped for the query.) You cannot mix ordinal positions with header column names.   SELECT s.Id, s.FirstName, s.SSN FROM S3Object s    When making a select request, you can also do the following:   To expedite your queries, specify the Expedited tier. For more information about tiers, see "Restoring Archives," later in this topic.   Specify details about the data serialization format of both the input object that is being queried and the serialization of the CSV-encoded query results.   The following are additional important facts about the select feature:   The output results are new Amazon S3 objects. Unlike archive retrievals, they are stored until explicitly deleted-manually or through a lifecycle configuration.   You can issue more than one select request on the same Amazon S3 object. Amazon S3 doesn't duplicate requests, so avoid issuing duplicate requests.    Amazon S3 accepts a select request even if the object has already been restored. A select request doesn’t return error response 409.    Permissions  To use this operation, you must have permissions to perform the s3:RestoreObject action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.  Restoring objects  Objects that you archive to the S3 Glacier Flexible Retrieval or S3 Glacier Deep Archive storage class, and S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, are not accessible in real time. For objects in the S3 Glacier Flexible Retrieval or S3 Glacier Deep Archive storage classes, you must first initiate a restore request, and then wait until a temporary copy of the object is available. If you want a permanent copy of the object, create a copy of it in the Amazon S3 Standard storage class in your S3 bucket. To access an archived object, you must restore the object for the duration (number of days) that you specify. For objects in the Archive Access or Deep Archive Access tiers of S3 Intelligent-Tiering, you must first initiate a restore request, and then wait until the object is moved into the Frequent Access tier. To restore a specific object version, you can provide a version ID. If you don't provide a version ID, Amazon S3 restores the current version. When restoring an archived object, you can specify one of the following data access tier options in the Tier element of the request body:     Expedited - Expedited retrievals allow you to quickly access your data stored in the S3 Glacier Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier when occasional urgent requests for restoring archives are required. For all but the largest archived objects (250 MB+), data accessed using Expedited retrievals is typically made available within 1–5 minutes. Provisioned capacity ensures that retrieval capacity for Expedited retrievals is available when you need it. Expedited retrievals and provisioned capacity are not available for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier.    Standard - Standard retrievals allow you to access any of your archived objects within several hours. This is the default option for retrieval requests that do not specify the retrieval option. Standard retrievals typically finish within 3–5 hours for objects stored in the S3 Glacier Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier. They typically finish within 12 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier. Standard retrievals are free for objects stored in S3 Intelligent-Tiering.    Bulk - Bulk retrievals free for objects stored in the S3 Glacier Flexible Retrieval and S3 Intelligent-Tiering storage classes, enabling you to retrieve large amounts, even petabytes, of data at no cost. Bulk retrievals typically finish within 5–12 hours for objects stored in the S3 Glacier Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier. Bulk retrievals are also the lowest-cost retrieval option when restoring objects from S3 Glacier Deep Archive. They typically finish within 48 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier.    For more information about archive retrieval options and provisioned capacity for Expedited data access, see Restoring Archived Objects in the Amazon S3 User Guide.  You can use Amazon S3 restore speed upgrade to change the restore speed to a faster speed while it is in progress. For more information, see  Upgrading the speed of an in-progress restore in the Amazon S3 User Guide.  To get the status of object restoration, you can send a HEAD request. Operations return the x-amz-restore header, which provides information about the restoration status, in the response. You can use Amazon S3 event notifications to notify you when a restore is initiated or completed. For more information, see Configuring Amazon S3 Event Notifications in the Amazon S3 User Guide. After restoring an archived object, you can update the restoration period by reissuing the request with a new period. Amazon S3 updates the restoration period relative to the current time and charges only for the request-there are no data transfer charges. You cannot update the restoration period when Amazon S3 is actively processing your current restore request for the object. If your bucket has a lifecycle configuration with a rule that includes an expiration action, the object expiration overrides the life span that you specify in a restore request. For example, if you restore an object copy for 10 days, but the object is scheduled to expire in 3 days, Amazon S3 deletes the object in 3 days. For more information about lifecycle configuration, see PutBucketLifecycleConfiguration and Object Lifecycle Management in Amazon S3 User Guide.  Responses  A successful action returns either the 200 OK or 202 Accepted status code.    If the object is not previously restored, then Amazon S3 returns 202 Accepted in the response.    If the object is previously restored, Amazon S3 returns 200 OK in the response.      Special errors:    Code: RestoreAlreadyInProgress     Cause: Object restore is already in progress. (This error does not apply to SELECT type requests.)     HTTP Status Code: 409 Conflict     SOAP Fault Code Prefix: Client         Code: GlacierExpeditedRetrievalNotAvailable     Cause: expedited retrievals are currently not available. Try again later. (Returned if there is insufficient capacity to process the Expedited request. This error applies only to Expedited retrievals and not to S3 Standard or Bulk retrievals.)     HTTP Status Code: 503     SOAP Fault Code Prefix: N/A        The following operations are related to RestoreObject:    PutBucketLifecycleConfiguration     GetBucketNotificationConfiguration   
+   * Restores an archived copy of an object back into Amazon S3 This action is not supported by Amazon S3 on Outposts. This action performs the following types of requests:     select - Perform a select query on an archived object    restore an archive - Restore an archived object   For more information about the S3 structure in the request body, see the following:    PutObject     Managing Access with ACLs in the Amazon S3 User Guide     Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide    Define the SQL expression for the SELECT type of restoration for your query in the request body's SelectParameters structure. You can use expressions like the following examples.   The following expression returns all records from the specified object.  SELECT * FROM Object    Assuming that you are not using any headers for data stored in the object, you can specify columns with positional headers.  SELECT s._1, s._2 FROM Object s WHERE s._3 &gt; 100    If you have headers and you set the fileHeaderInfo in the CSV structure in the request body to USE, you can specify headers in the query. (If you set the fileHeaderInfo field to IGNORE, the first row is skipped for the query.) You cannot mix ordinal positions with header column names.   SELECT s.Id, s.FirstName, s.SSN FROM S3Object s    When making a select request, you can also do the following:   To expedite your queries, specify the Expedited tier. For more information about tiers, see "Restoring Archives," later in this topic.   Specify details about the data serialization format of both the input object that is being queried and the serialization of the CSV-encoded query results.   The following are additional important facts about the select feature:   The output results are new Amazon S3 objects. Unlike archive retrievals, they are stored until explicitly deleted-manually or through a lifecycle configuration.   You can issue more than one select request on the same Amazon S3 object. Amazon S3 doesn't duplicate requests, so avoid issuing duplicate requests.    Amazon S3 accepts a select request even if the object has already been restored. A select request doesn’t return error response 409.    Permissions  To use this operation, you must have permissions to perform the s3:RestoreObject action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.  Restoring objects  Objects that you archive to the S3 Glacier Flexible Retrieval Flexible Retrieval or S3 Glacier Deep Archive storage class, and S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, are not accessible in real time. For objects in the S3 Glacier Flexible Retrieval Flexible Retrieval or S3 Glacier Deep Archive storage classes, you must first initiate a restore request, and then wait until a temporary copy of the object is available. If you want a permanent copy of the object, create a copy of it in the Amazon S3 Standard storage class in your S3 bucket. To access an archived object, you must restore the object for the duration (number of days) that you specify. For objects in the Archive Access or Deep Archive Access tiers of S3 Intelligent-Tiering, you must first initiate a restore request, and then wait until the object is moved into the Frequent Access tier. To restore a specific object version, you can provide a version ID. If you don't provide a version ID, Amazon S3 restores the current version. When restoring an archived object, you can specify one of the following data access tier options in the Tier element of the request body:     Expedited - Expedited retrievals allow you to quickly access your data stored in the S3 Glacier Flexible Retrieval Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier when occasional urgent requests for restoring archives are required. For all but the largest archived objects (250 MB+), data accessed using Expedited retrievals is typically made available within 1–5 minutes. Provisioned capacity ensures that retrieval capacity for Expedited retrievals is available when you need it. Expedited retrievals and provisioned capacity are not available for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier.    Standard - Standard retrievals allow you to access any of your archived objects within several hours. This is the default option for retrieval requests that do not specify the retrieval option. Standard retrievals typically finish within 3–5 hours for objects stored in the S3 Glacier Flexible Retrieval Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier. They typically finish within 12 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier. Standard retrievals are free for objects stored in S3 Intelligent-Tiering.    Bulk - Bulk retrievals free for objects stored in the S3 Glacier Flexible Retrieval and S3 Intelligent-Tiering storage classes, enabling you to retrieve large amounts, even petabytes, of data at no cost. Bulk retrievals typically finish within 5–12 hours for objects stored in the S3 Glacier Flexible Retrieval Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier. Bulk retrievals are also the lowest-cost retrieval option when restoring objects from S3 Glacier Deep Archive. They typically finish within 48 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier.    For more information about archive retrieval options and provisioned capacity for Expedited data access, see Restoring Archived Objects in the Amazon S3 User Guide.  You can use Amazon S3 restore speed upgrade to change the restore speed to a faster speed while it is in progress. For more information, see  Upgrading the speed of an in-progress restore in the Amazon S3 User Guide.  To get the status of object restoration, you can send a HEAD request. Operations return the x-amz-restore header, which provides information about the restoration status, in the response. You can use Amazon S3 event notifications to notify you when a restore is initiated or completed. For more information, see Configuring Amazon S3 Event Notifications in the Amazon S3 User Guide. After restoring an archived object, you can update the restoration period by reissuing the request with a new period. Amazon S3 updates the restoration period relative to the current time and charges only for the request-there are no data transfer charges. You cannot update the restoration period when Amazon S3 is actively processing your current restore request for the object. If your bucket has a lifecycle configuration with a rule that includes an expiration action, the object expiration overrides the life span that you specify in a restore request. For example, if you restore an object copy for 10 days, but the object is scheduled to expire in 3 days, Amazon S3 deletes the object in 3 days. For more information about lifecycle configuration, see PutBucketLifecycleConfiguration and Object Lifecycle Management in Amazon S3 User Guide.  Responses  A successful action returns either the 200 OK or 202 Accepted status code.    If the object is not previously restored, then Amazon S3 returns 202 Accepted in the response.    If the object is previously restored, Amazon S3 returns 200 OK in the response.      Special errors:    Code: RestoreAlreadyInProgress     Cause: Object restore is already in progress. (This error does not apply to SELECT type requests.)     HTTP Status Code: 409 Conflict     SOAP Fault Code Prefix: Client         Code: GlacierExpeditedRetrievalNotAvailable     Cause: expedited retrievals are currently not available. Try again later. (Returned if there is insufficient capacity to process the Expedited request. This error applies only to Expedited retrievals and not to S3 Standard or Bulk retrievals.)     HTTP Status Code: 503     SOAP Fault Code Prefix: N/A        The following operations are related to RestoreObject:    PutBucketLifecycleConfiguration     GetBucketNotificationConfiguration   
    */
   restoreObject(params: S3.Types.RestoreObjectRequest, callback?: (err: AWSError, data: S3.Types.RestoreObjectOutput) => void): Request<S3.Types.RestoreObjectOutput, AWSError>;
   /**
-   * Restores an archived copy of an object back into Amazon S3 This action is not supported by Amazon S3 on Outposts. This action performs the following types of requests:     select - Perform a select query on an archived object    restore an archive - Restore an archived object   For more information about the S3 structure in the request body, see the following:    PutObject     Managing Access with ACLs in the Amazon S3 User Guide     Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide    Define the SQL expression for the SELECT type of restoration for your query in the request body's SelectParameters structure. You can use expressions like the following examples.   The following expression returns all records from the specified object.  SELECT * FROM Object    Assuming that you are not using any headers for data stored in the object, you can specify columns with positional headers.  SELECT s._1, s._2 FROM Object s WHERE s._3 &gt; 100    If you have headers and you set the fileHeaderInfo in the CSV structure in the request body to USE, you can specify headers in the query. (If you set the fileHeaderInfo field to IGNORE, the first row is skipped for the query.) You cannot mix ordinal positions with header column names.   SELECT s.Id, s.FirstName, s.SSN FROM S3Object s    When making a select request, you can also do the following:   To expedite your queries, specify the Expedited tier. For more information about tiers, see "Restoring Archives," later in this topic.   Specify details about the data serialization format of both the input object that is being queried and the serialization of the CSV-encoded query results.   The following are additional important facts about the select feature:   The output results are new Amazon S3 objects. Unlike archive retrievals, they are stored until explicitly deleted-manually or through a lifecycle configuration.   You can issue more than one select request on the same Amazon S3 object. Amazon S3 doesn't duplicate requests, so avoid issuing duplicate requests.    Amazon S3 accepts a select request even if the object has already been restored. A select request doesn’t return error response 409.    Permissions  To use this operation, you must have permissions to perform the s3:RestoreObject action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.  Restoring objects  Objects that you archive to the S3 Glacier Flexible Retrieval or S3 Glacier Deep Archive storage class, and S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, are not accessible in real time. For objects in the S3 Glacier Flexible Retrieval or S3 Glacier Deep Archive storage classes, you must first initiate a restore request, and then wait until a temporary copy of the object is available. If you want a permanent copy of the object, create a copy of it in the Amazon S3 Standard storage class in your S3 bucket. To access an archived object, you must restore the object for the duration (number of days) that you specify. For objects in the Archive Access or Deep Archive Access tiers of S3 Intelligent-Tiering, you must first initiate a restore request, and then wait until the object is moved into the Frequent Access tier. To restore a specific object version, you can provide a version ID. If you don't provide a version ID, Amazon S3 restores the current version. When restoring an archived object, you can specify one of the following data access tier options in the Tier element of the request body:     Expedited - Expedited retrievals allow you to quickly access your data stored in the S3 Glacier Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier when occasional urgent requests for restoring archives are required. For all but the largest archived objects (250 MB+), data accessed using Expedited retrievals is typically made available within 1–5 minutes. Provisioned capacity ensures that retrieval capacity for Expedited retrievals is available when you need it. Expedited retrievals and provisioned capacity are not available for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier.    Standard - Standard retrievals allow you to access any of your archived objects within several hours. This is the default option for retrieval requests that do not specify the retrieval option. Standard retrievals typically finish within 3–5 hours for objects stored in the S3 Glacier Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier. They typically finish within 12 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier. Standard retrievals are free for objects stored in S3 Intelligent-Tiering.    Bulk - Bulk retrievals free for objects stored in the S3 Glacier Flexible Retrieval and S3 Intelligent-Tiering storage classes, enabling you to retrieve large amounts, even petabytes, of data at no cost. Bulk retrievals typically finish within 5–12 hours for objects stored in the S3 Glacier Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier. Bulk retrievals are also the lowest-cost retrieval option when restoring objects from S3 Glacier Deep Archive. They typically finish within 48 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier.    For more information about archive retrieval options and provisioned capacity for Expedited data access, see Restoring Archived Objects in the Amazon S3 User Guide.  You can use Amazon S3 restore speed upgrade to change the restore speed to a faster speed while it is in progress. For more information, see  Upgrading the speed of an in-progress restore in the Amazon S3 User Guide.  To get the status of object restoration, you can send a HEAD request. Operations return the x-amz-restore header, which provides information about the restoration status, in the response. You can use Amazon S3 event notifications to notify you when a restore is initiated or completed. For more information, see Configuring Amazon S3 Event Notifications in the Amazon S3 User Guide. After restoring an archived object, you can update the restoration period by reissuing the request with a new period. Amazon S3 updates the restoration period relative to the current time and charges only for the request-there are no data transfer charges. You cannot update the restoration period when Amazon S3 is actively processing your current restore request for the object. If your bucket has a lifecycle configuration with a rule that includes an expiration action, the object expiration overrides the life span that you specify in a restore request. For example, if you restore an object copy for 10 days, but the object is scheduled to expire in 3 days, Amazon S3 deletes the object in 3 days. For more information about lifecycle configuration, see PutBucketLifecycleConfiguration and Object Lifecycle Management in Amazon S3 User Guide.  Responses  A successful action returns either the 200 OK or 202 Accepted status code.    If the object is not previously restored, then Amazon S3 returns 202 Accepted in the response.    If the object is previously restored, Amazon S3 returns 200 OK in the response.      Special errors:    Code: RestoreAlreadyInProgress     Cause: Object restore is already in progress. (This error does not apply to SELECT type requests.)     HTTP Status Code: 409 Conflict     SOAP Fault Code Prefix: Client         Code: GlacierExpeditedRetrievalNotAvailable     Cause: expedited retrievals are currently not available. Try again later. (Returned if there is insufficient capacity to process the Expedited request. This error applies only to Expedited retrievals and not to S3 Standard or Bulk retrievals.)     HTTP Status Code: 503     SOAP Fault Code Prefix: N/A        The following operations are related to RestoreObject:    PutBucketLifecycleConfiguration     GetBucketNotificationConfiguration   
+   * Restores an archived copy of an object back into Amazon S3 This action is not supported by Amazon S3 on Outposts. This action performs the following types of requests:     select - Perform a select query on an archived object    restore an archive - Restore an archived object   For more information about the S3 structure in the request body, see the following:    PutObject     Managing Access with ACLs in the Amazon S3 User Guide     Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide    Define the SQL expression for the SELECT type of restoration for your query in the request body's SelectParameters structure. You can use expressions like the following examples.   The following expression returns all records from the specified object.  SELECT * FROM Object    Assuming that you are not using any headers for data stored in the object, you can specify columns with positional headers.  SELECT s._1, s._2 FROM Object s WHERE s._3 &gt; 100    If you have headers and you set the fileHeaderInfo in the CSV structure in the request body to USE, you can specify headers in the query. (If you set the fileHeaderInfo field to IGNORE, the first row is skipped for the query.) You cannot mix ordinal positions with header column names.   SELECT s.Id, s.FirstName, s.SSN FROM S3Object s    When making a select request, you can also do the following:   To expedite your queries, specify the Expedited tier. For more information about tiers, see "Restoring Archives," later in this topic.   Specify details about the data serialization format of both the input object that is being queried and the serialization of the CSV-encoded query results.   The following are additional important facts about the select feature:   The output results are new Amazon S3 objects. Unlike archive retrievals, they are stored until explicitly deleted-manually or through a lifecycle configuration.   You can issue more than one select request on the same Amazon S3 object. Amazon S3 doesn't duplicate requests, so avoid issuing duplicate requests.    Amazon S3 accepts a select request even if the object has already been restored. A select request doesn’t return error response 409.    Permissions  To use this operation, you must have permissions to perform the s3:RestoreObject action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.  Restoring objects  Objects that you archive to the S3 Glacier Flexible Retrieval Flexible Retrieval or S3 Glacier Deep Archive storage class, and S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, are not accessible in real time. For objects in the S3 Glacier Flexible Retrieval Flexible Retrieval or S3 Glacier Deep Archive storage classes, you must first initiate a restore request, and then wait until a temporary copy of the object is available. If you want a permanent copy of the object, create a copy of it in the Amazon S3 Standard storage class in your S3 bucket. To access an archived object, you must restore the object for the duration (number of days) that you specify. For objects in the Archive Access or Deep Archive Access tiers of S3 Intelligent-Tiering, you must first initiate a restore request, and then wait until the object is moved into the Frequent Access tier. To restore a specific object version, you can provide a version ID. If you don't provide a version ID, Amazon S3 restores the current version. When restoring an archived object, you can specify one of the following data access tier options in the Tier element of the request body:     Expedited - Expedited retrievals allow you to quickly access your data stored in the S3 Glacier Flexible Retrieval Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier when occasional urgent requests for restoring archives are required. For all but the largest archived objects (250 MB+), data accessed using Expedited retrievals is typically made available within 1–5 minutes. Provisioned capacity ensures that retrieval capacity for Expedited retrievals is available when you need it. Expedited retrievals and provisioned capacity are not available for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier.    Standard - Standard retrievals allow you to access any of your archived objects within several hours. This is the default option for retrieval requests that do not specify the retrieval option. Standard retrievals typically finish within 3–5 hours for objects stored in the S3 Glacier Flexible Retrieval Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier. They typically finish within 12 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier. Standard retrievals are free for objects stored in S3 Intelligent-Tiering.    Bulk - Bulk retrievals free for objects stored in the S3 Glacier Flexible Retrieval and S3 Intelligent-Tiering storage classes, enabling you to retrieve large amounts, even petabytes, of data at no cost. Bulk retrievals typically finish within 5–12 hours for objects stored in the S3 Glacier Flexible Retrieval Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier. Bulk retrievals are also the lowest-cost retrieval option when restoring objects from S3 Glacier Deep Archive. They typically finish within 48 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier.    For more information about archive retrieval options and provisioned capacity for Expedited data access, see Restoring Archived Objects in the Amazon S3 User Guide.  You can use Amazon S3 restore speed upgrade to change the restore speed to a faster speed while it is in progress. For more information, see  Upgrading the speed of an in-progress restore in the Amazon S3 User Guide.  To get the status of object restoration, you can send a HEAD request. Operations return the x-amz-restore header, which provides information about the restoration status, in the response. You can use Amazon S3 event notifications to notify you when a restore is initiated or completed. For more information, see Configuring Amazon S3 Event Notifications in the Amazon S3 User Guide. After restoring an archived object, you can update the restoration period by reissuing the request with a new period. Amazon S3 updates the restoration period relative to the current time and charges only for the request-there are no data transfer charges. You cannot update the restoration period when Amazon S3 is actively processing your current restore request for the object. If your bucket has a lifecycle configuration with a rule that includes an expiration action, the object expiration overrides the life span that you specify in a restore request. For example, if you restore an object copy for 10 days, but the object is scheduled to expire in 3 days, Amazon S3 deletes the object in 3 days. For more information about lifecycle configuration, see PutBucketLifecycleConfiguration and Object Lifecycle Management in Amazon S3 User Guide.  Responses  A successful action returns either the 200 OK or 202 Accepted status code.    If the object is not previously restored, then Amazon S3 returns 202 Accepted in the response.    If the object is previously restored, Amazon S3 returns 200 OK in the response.      Special errors:    Code: RestoreAlreadyInProgress     Cause: Object restore is already in progress. (This error does not apply to SELECT type requests.)     HTTP Status Code: 409 Conflict     SOAP Fault Code Prefix: Client         Code: GlacierExpeditedRetrievalNotAvailable     Cause: expedited retrievals are currently not available. Try again later. (Returned if there is insufficient capacity to process the Expedited request. This error applies only to Expedited retrievals and not to S3 Standard or Bulk retrievals.)     HTTP Status Code: 503     SOAP Fault Code Prefix: N/A        The following operations are related to RestoreObject:    PutBucketLifecycleConfiguration     GetBucketNotificationConfiguration   
    */
   restoreObject(callback?: (err: AWSError, data: S3.Types.RestoreObjectOutput) => void): Request<S3.Types.RestoreObjectOutput, AWSError>;
   /**
-   * This action filters the contents of an Amazon S3 object based on a simple structured query language (SQL) statement. In the request, along with the SQL expression, you must also specify a data serialization format (JSON, CSV, or Apache Parquet) of the object. Amazon S3 uses this format to parse object data into records, and returns only records that match the specified SQL expression. You must also specify the data serialization format for the response. This action is not supported by Amazon S3 on Outposts. For more information about Amazon S3 Select, see Selecting Content from Objects and SELECT Command in the Amazon S3 User Guide.   Permissions  You must have s3:GetObject permission for this operation. Amazon S3 Select does not support anonymous access. For more information about permissions, see Specifying Permissions in a Policy in the Amazon S3 User Guide.  Object Data Formats  You can use Amazon S3 Select to query objects that have the following format properties:    CSV, JSON, and Parquet - Objects must be in CSV, JSON, or Parquet format.    UTF-8 - UTF-8 is the only encoding type Amazon S3 Select supports.    GZIP or BZIP2 - CSV and JSON files can be compressed using GZIP or BZIP2. GZIP and BZIP2 are the only compression formats that Amazon S3 Select supports for CSV and JSON files. Amazon S3 Select supports columnar compression for Parquet using GZIP or Snappy. Amazon S3 Select does not support whole-object compression for Parquet objects.    Server-side encryption - Amazon S3 Select supports querying objects that are protected with server-side encryption. For objects that are encrypted with customer-provided encryption keys (SSE-C), you must use HTTPS, and you must use the headers that are documented in the GetObject. For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide. For objects that are encrypted with Amazon S3 managed keys (SSE-S3) and Amazon Web Services KMS keys (SSE-KMS), server-side encryption is handled transparently, so you don't need to specify anything. For more information about server-side encryption, including SSE-S3 and SSE-KMS, see Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide.    Working with the Response Body  Given the response size is unknown, Amazon S3 Select streams the response as a series of messages and includes a Transfer-Encoding header with chunked as its value in the response. For more information, see Appendix: SelectObjectContent Response.  GetObject Support  The SelectObjectContent action does not support the following GetObject functionality. For more information, see GetObject.    Range: Although you can specify a scan range for an Amazon S3 Select request (see SelectObjectContentRequest - ScanRange in the request parameters), you cannot specify the range of bytes of an object to return.    GLACIER, DEEP_ARCHIVE and REDUCED_REDUNDANCY storage classes: You cannot specify the GLACIER, DEEP_ARCHIVE, or REDUCED_REDUNDANCY storage classes. For more information, about storage classes see Storage Classes in the Amazon S3 User Guide.    Special Errors  For a list of special errors for this operation, see List of SELECT Object Content Error Codes    The following operations are related to SelectObjectContent:    GetObject     GetBucketLifecycleConfiguration     PutBucketLifecycleConfiguration   
+   * This action filters the contents of an Amazon S3 object based on a simple structured query language (SQL) statement. In the request, along with the SQL expression, you must also specify a data serialization format (JSON, CSV, or Apache Parquet) of the object. Amazon S3 uses this format to parse object data into records, and returns only records that match the specified SQL expression. You must also specify the data serialization format for the response. This action is not supported by Amazon S3 on Outposts. For more information about Amazon S3 Select, see Selecting Content from Objects and SELECT Command in the Amazon S3 User Guide.   Permissions  You must have s3:GetObject permission for this operation. Amazon S3 Select does not support anonymous access. For more information about permissions, see Specifying Permissions in a Policy in the Amazon S3 User Guide.  Object Data Formats  You can use Amazon S3 Select to query objects that have the following format properties:    CSV, JSON, and Parquet - Objects must be in CSV, JSON, or Parquet format.    UTF-8 - UTF-8 is the only encoding type Amazon S3 Select supports.    GZIP or BZIP2 - CSV and JSON files can be compressed using GZIP or BZIP2. GZIP and BZIP2 are the only compression formats that Amazon S3 Select supports for CSV and JSON files. Amazon S3 Select supports columnar compression for Parquet using GZIP or Snappy. Amazon S3 Select does not support whole-object compression for Parquet objects.    Server-side encryption - Amazon S3 Select supports querying objects that are protected with server-side encryption. For objects that are encrypted with customer-provided encryption keys (SSE-C), you must use HTTPS, and you must use the headers that are documented in the GetObject. For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide. For objects that are encrypted with Amazon S3 managed keys (SSE-S3) and Amazon Web Services KMS keys (SSE-KMS), server-side encryption is handled transparently, so you don't need to specify anything. For more information about server-side encryption, including SSE-S3 and SSE-KMS, see Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide.    Working with the Response Body  Given the response size is unknown, Amazon S3 Select streams the response as a series of messages and includes a Transfer-Encoding header with chunked as its value in the response. For more information, see Appendix: SelectObjectContent Response.  GetObject Support  The SelectObjectContent action does not support the following GetObject functionality. For more information, see GetObject.    Range: Although you can specify a scan range for an Amazon S3 Select request (see SelectObjectContentRequest - ScanRange in the request parameters), you cannot specify the range of bytes of an object to return.    The GLACIER, DEEP_ARCHIVE, and REDUCED_REDUNDANCY storage classes, or the ARCHIVE_ACCESS and DEEP_ARCHIVE_ACCESS access tiers of the INTELLIGENT_TIERING storage class: You cannot query objects in the GLACIER, DEEP_ARCHIVE, or REDUCED_REDUNDANCY storage classes, nor objects in the ARCHIVE_ACCESS or DEEP_ARCHIVE_ACCESS access tiers of the INTELLIGENT_TIERING storage class. For more information about storage classes, see Using Amazon S3 storage classes in the Amazon S3 User Guide.    Special Errors  For a list of special errors for this operation, see List of SELECT Object Content Error Codes    The following operations are related to SelectObjectContent:    GetObject     GetBucketLifecycleConfiguration     PutBucketLifecycleConfiguration   
    */
   selectObjectContent(params: S3.Types.SelectObjectContentRequest, callback?: (err: AWSError, data: S3.Types.SelectObjectContentOutput) => void): Request<S3.Types.SelectObjectContentOutput, AWSError>;
   /**
-   * This action filters the contents of an Amazon S3 object based on a simple structured query language (SQL) statement. In the request, along with the SQL expression, you must also specify a data serialization format (JSON, CSV, or Apache Parquet) of the object. Amazon S3 uses this format to parse object data into records, and returns only records that match the specified SQL expression. You must also specify the data serialization format for the response. This action is not supported by Amazon S3 on Outposts. For more information about Amazon S3 Select, see Selecting Content from Objects and SELECT Command in the Amazon S3 User Guide.   Permissions  You must have s3:GetObject permission for this operation. Amazon S3 Select does not support anonymous access. For more information about permissions, see Specifying Permissions in a Policy in the Amazon S3 User Guide.  Object Data Formats  You can use Amazon S3 Select to query objects that have the following format properties:    CSV, JSON, and Parquet - Objects must be in CSV, JSON, or Parquet format.    UTF-8 - UTF-8 is the only encoding type Amazon S3 Select supports.    GZIP or BZIP2 - CSV and JSON files can be compressed using GZIP or BZIP2. GZIP and BZIP2 are the only compression formats that Amazon S3 Select supports for CSV and JSON files. Amazon S3 Select supports columnar compression for Parquet using GZIP or Snappy. Amazon S3 Select does not support whole-object compression for Parquet objects.    Server-side encryption - Amazon S3 Select supports querying objects that are protected with server-side encryption. For objects that are encrypted with customer-provided encryption keys (SSE-C), you must use HTTPS, and you must use the headers that are documented in the GetObject. For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide. For objects that are encrypted with Amazon S3 managed keys (SSE-S3) and Amazon Web Services KMS keys (SSE-KMS), server-side encryption is handled transparently, so you don't need to specify anything. For more information about server-side encryption, including SSE-S3 and SSE-KMS, see Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide.    Working with the Response Body  Given the response size is unknown, Amazon S3 Select streams the response as a series of messages and includes a Transfer-Encoding header with chunked as its value in the response. For more information, see Appendix: SelectObjectContent Response.  GetObject Support  The SelectObjectContent action does not support the following GetObject functionality. For more information, see GetObject.    Range: Although you can specify a scan range for an Amazon S3 Select request (see SelectObjectContentRequest - ScanRange in the request parameters), you cannot specify the range of bytes of an object to return.    GLACIER, DEEP_ARCHIVE and REDUCED_REDUNDANCY storage classes: You cannot specify the GLACIER, DEEP_ARCHIVE, or REDUCED_REDUNDANCY storage classes. For more information, about storage classes see Storage Classes in the Amazon S3 User Guide.    Special Errors  For a list of special errors for this operation, see List of SELECT Object Content Error Codes    The following operations are related to SelectObjectContent:    GetObject     GetBucketLifecycleConfiguration     PutBucketLifecycleConfiguration   
+   * This action filters the contents of an Amazon S3 object based on a simple structured query language (SQL) statement. In the request, along with the SQL expression, you must also specify a data serialization format (JSON, CSV, or Apache Parquet) of the object. Amazon S3 uses this format to parse object data into records, and returns only records that match the specified SQL expression. You must also specify the data serialization format for the response. This action is not supported by Amazon S3 on Outposts. For more information about Amazon S3 Select, see Selecting Content from Objects and SELECT Command in the Amazon S3 User Guide.   Permissions  You must have s3:GetObject permission for this operation. Amazon S3 Select does not support anonymous access. For more information about permissions, see Specifying Permissions in a Policy in the Amazon S3 User Guide.  Object Data Formats  You can use Amazon S3 Select to query objects that have the following format properties:    CSV, JSON, and Parquet - Objects must be in CSV, JSON, or Parquet format.    UTF-8 - UTF-8 is the only encoding type Amazon S3 Select supports.    GZIP or BZIP2 - CSV and JSON files can be compressed using GZIP or BZIP2. GZIP and BZIP2 are the only compression formats that Amazon S3 Select supports for CSV and JSON files. Amazon S3 Select supports columnar compression for Parquet using GZIP or Snappy. Amazon S3 Select does not support whole-object compression for Parquet objects.    Server-side encryption - Amazon S3 Select supports querying objects that are protected with server-side encryption. For objects that are encrypted with customer-provided encryption keys (SSE-C), you must use HTTPS, and you must use the headers that are documented in the GetObject. For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide. For objects that are encrypted with Amazon S3 managed keys (SSE-S3) and Amazon Web Services KMS keys (SSE-KMS), server-side encryption is handled transparently, so you don't need to specify anything. For more information about server-side encryption, including SSE-S3 and SSE-KMS, see Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide.    Working with the Response Body  Given the response size is unknown, Amazon S3 Select streams the response as a series of messages and includes a Transfer-Encoding header with chunked as its value in the response. For more information, see Appendix: SelectObjectContent Response.  GetObject Support  The SelectObjectContent action does not support the following GetObject functionality. For more information, see GetObject.    Range: Although you can specify a scan range for an Amazon S3 Select request (see SelectObjectContentRequest - ScanRange in the request parameters), you cannot specify the range of bytes of an object to return.    The GLACIER, DEEP_ARCHIVE, and REDUCED_REDUNDANCY storage classes, or the ARCHIVE_ACCESS and DEEP_ARCHIVE_ACCESS access tiers of the INTELLIGENT_TIERING storage class: You cannot query objects in the GLACIER, DEEP_ARCHIVE, or REDUCED_REDUNDANCY storage classes, nor objects in the ARCHIVE_ACCESS or DEEP_ARCHIVE_ACCESS access tiers of the INTELLIGENT_TIERING storage class. For more information about storage classes, see Using Amazon S3 storage classes in the Amazon S3 User Guide.    Special Errors  For a list of special errors for this operation, see List of SELECT Object Content Error Codes    The following operations are related to SelectObjectContent:    GetObject     GetBucketLifecycleConfiguration     PutBucketLifecycleConfiguration   
    */
   selectObjectContent(callback?: (err: AWSError, data: S3.Types.SelectObjectContentOutput) => void): Request<S3.Types.SelectObjectContentOutput, AWSError>;
   /**
@@ -1171,11 +1171,11 @@ declare namespace S3 {
      */
     VersionId?: ObjectVersionId;
     /**
-     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric encryption customer managed key that was used for the object.
+     * If present, specifies the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
-     * Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Amazon Web Services KMS (SSE-KMS).
+     * Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     RequestCharged?: RequestCharged;
@@ -1303,7 +1303,7 @@ declare namespace S3 {
      */
     VersionId?: ObjectVersionId;
     /**
-     * The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).
+     * The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms, aws:kms:dsse).
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -1315,7 +1315,7 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric encryption customer managed key that was used for the object.
+     * If present, specifies the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
@@ -1323,7 +1323,7 @@ declare namespace S3 {
      */
     SSEKMSEncryptionContext?: SSEKMSEncryptionContext;
     /**
-     * Indicates whether the copied object uses an S3 Bucket Key for server-side encryption with Amazon Web Services KMS (SSE-KMS).
+     * Indicates whether the copied object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     RequestCharged?: RequestCharged;
@@ -1418,7 +1418,7 @@ declare namespace S3 {
      */
     TaggingDirective?: TaggingDirective;
     /**
-     * The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).
+     * The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms, aws:kms:dsse).
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -1442,7 +1442,7 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * Specifies the Amazon Web Services KMS key ID to use for object encryption. All GET and PUT requests for an object protected by Amazon Web Services KMS will fail if not made via SSL or using SigV4. For information about configuring using any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.
+     * Specifies the KMS key ID to use for object encryption. All GET and PUT requests for an object protected by KMS will fail if they're not made via SSL or using SigV4. For information about configuring any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
@@ -1450,7 +1450,7 @@ declare namespace S3 {
      */
     SSEKMSEncryptionContext?: SSEKMSEncryptionContext;
     /**
-     * Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using AWS KMS (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.  Specifying this header with a COPY action doesn’t affect bucket-level settings for S3 Bucket Key.
+     * Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.  Specifying this header with a COPY action doesn’t affect bucket-level settings for S3 Bucket Key.
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     /**
@@ -1638,7 +1638,7 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric encryption customer managed key that was used for the object.
+     * If present, specifies the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
@@ -1646,7 +1646,7 @@ declare namespace S3 {
      */
     SSEKMSEncryptionContext?: SSEKMSEncryptionContext;
     /**
-     * Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Amazon Web Services KMS (SSE-KMS).
+     * Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     RequestCharged?: RequestCharged;
@@ -1737,7 +1737,7 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * Specifies the ID of the symmetric encryption customer managed key to use for object encryption. All GET and PUT requests for an object protected by Amazon Web Services KMS will fail if not made via SSL or using SigV4. For information about configuring using any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.
+     * Specifies the ID of the symmetric encryption customer managed key to use for object encryption. All GET and PUT requests for an object protected by KMS will fail if they're not made via SSL or using SigV4. For information about configuring any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
@@ -1745,7 +1745,7 @@ declare namespace S3 {
      */
     SSEKMSEncryptionContext?: SSEKMSEncryptionContext;
     /**
-     * Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using AWS KMS (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS. Specifying this header with an object action doesn’t affect bucket-level settings for S3 Bucket Key.
+     * Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS. Specifying this header with an object action doesn’t affect bucket-level settings for S3 Bucket Key.
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     RequestPayer?: RequestPayer;
@@ -1794,7 +1794,7 @@ declare namespace S3 {
   }
   export interface Delete {
     /**
-     * The objects to delete.
+     * The object to delete.
      */
     Objects: ObjectIdentifierList;
     /**
@@ -2148,7 +2148,7 @@ declare namespace S3 {
      */
     EncryptionType: ServerSideEncryption;
     /**
-     * If the encryption type is aws:kms, this optional value specifies the ID of the symmetric encryption customer managed key to use for encryption of job results. Amazon S3 only supports symmetric encryption KMS keys. For more information, see Asymmetric keys in Amazon Web Services KMS in the Amazon Web Services Key Management Service Developer Guide.
+     * If the encryption type is aws:kms, this optional value specifies the ID of the symmetric encryption customer managed key to use for encryption of job results. Amazon S3 only supports symmetric encryption KMS keys. For more information, see Asymmetric keys in KMS in the Amazon Web Services Key Management Service Developer Guide.
      */
     KMSKeyId?: SSEKMSKeyId;
     /**
@@ -2232,6 +2232,7 @@ declare namespace S3 {
      * The accelerate configuration of the bucket.
      */
     Status?: BucketAccelerateStatus;
+    RequestCharged?: RequestCharged;
   }
   export interface GetBucketAccelerateConfigurationRequest {
     /**
@@ -2242,6 +2243,7 @@ declare namespace S3 {
      * The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).
      */
     ExpectedBucketOwner?: AccountId;
+    RequestPayer?: RequestPayer;
   }
   export interface GetBucketAclOutput {
     /**
@@ -2845,7 +2847,7 @@ declare namespace S3 {
      */
     WebsiteRedirectLocation?: WebsiteRedirectLocation;
     /**
-     * The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).
+     * The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms, aws:kms:dsse).
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -2861,11 +2863,11 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric encryption customer managed key that was used for the object.
+     * If present, specifies the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
-     * Indicates whether the object uses an S3 Bucket Key for server-side encryption with Amazon Web Services KMS (SSE-KMS).
+     * Indicates whether the object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     /**
@@ -3214,7 +3216,7 @@ declare namespace S3 {
      */
     WebsiteRedirectLocation?: WebsiteRedirectLocation;
     /**
-     * The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).
+     * The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms, aws:kms:dsse).
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -3230,11 +3232,11 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric encryption customer managed key that was used for the object.
+     * If present, specifies the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
-     * Indicates whether the object uses an S3 Bucket Key for server-side encryption with Amazon Web Services KMS (SSE-KMS).
+     * Indicates whether the object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     /**
@@ -3805,6 +3807,7 @@ declare namespace S3 {
      * Encoding type used by Amazon S3 to encode object keys in the response. If you specify encoding-type request parameter, Amazon S3 includes this element in the response, and returns encoded key name values in the following response elements:  Delimiter, KeyMarker, Prefix, NextKeyMarker, Key.
      */
     EncodingType?: EncodingType;
+    RequestCharged?: RequestCharged;
   }
   export interface ListMultipartUploadsRequest {
     /**
@@ -3836,6 +3839,7 @@ declare namespace S3 {
      * The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).
      */
     ExpectedBucketOwner?: AccountId;
+    RequestPayer?: RequestPayer;
   }
   export interface ListObjectVersionsOutput {
     /**
@@ -3890,6 +3894,7 @@ declare namespace S3 {
      *  Encoding type used by Amazon S3 to encode object key names in the XML response. If you specify encoding-type request parameter, Amazon S3 includes this element in the response, and returns encoded key name values in the following response elements:  KeyMarker, NextKeyMarker, Prefix, Key, and Delimiter.
      */
     EncodingType?: EncodingType;
+    RequestCharged?: RequestCharged;
   }
   export interface ListObjectVersionsRequest {
     /**
@@ -3921,6 +3926,7 @@ declare namespace S3 {
      * The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).
      */
     ExpectedBucketOwner?: AccountId;
+    RequestPayer?: RequestPayer;
   }
   export interface ListObjectsOutput {
     /**
@@ -3963,6 +3969,7 @@ declare namespace S3 {
      * Encoding type used by Amazon S3 to encode object keys in the response.
      */
     EncodingType?: EncodingType;
+    RequestCharged?: RequestCharged;
   }
   export interface ListObjectsRequest {
     /**
@@ -4044,6 +4051,7 @@ declare namespace S3 {
      * If StartAfter was sent with the request, it is included in the response.
      */
     StartAfter?: StartAfter;
+    RequestCharged?: RequestCharged;
   }
   export interface ListObjectsV2Request {
     /**
@@ -5244,7 +5252,7 @@ declare namespace S3 {
      */
     ChecksumSHA256?: ChecksumSHA256;
     /**
-     * The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).
+     * The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms, aws:kms:dsse).
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -5260,7 +5268,7 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If x-amz-server-side-encryption is has a valid value of aws:kms, this header specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric encryption customer managed key that was used for the object. 
+     * If x-amz-server-side-encryption has a valid value of aws:kms or aws:kms:dsse, this header specifies the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object. 
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
@@ -5268,7 +5276,7 @@ declare namespace S3 {
      */
     SSEKMSEncryptionContext?: SSEKMSEncryptionContext;
     /**
-     * Indicates whether the uploaded object uses an S3 Bucket Key for server-side encryption with Amazon Web Services KMS (SSE-KMS).
+     * Indicates whether the uploaded object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     RequestCharged?: RequestCharged;
@@ -5363,7 +5371,7 @@ declare namespace S3 {
      */
     Metadata?: Metadata;
     /**
-     * The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).
+     * The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms, aws:kms:dsse).
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -5387,7 +5395,7 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If x-amz-server-side-encryption has a valid value of aws:kms, this header specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric encryption customer managed key that was used for the object. If you specify x-amz-server-side-encryption:aws:kms, but do not provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses the Amazon Web Services managed key to protect the data. If the KMS key does not exist in the same account issuing the command, you must use the full ARN and not just the ID. 
+     * If x-amz-server-side-encryption has a valid value of aws:kms or aws:kms:dsse, this header specifies the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object. If you specify x-amz-server-side-encryption:aws:kms or x-amz-server-side-encryption:aws:kms:dsse, but do not provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses the Amazon Web Services managed key (aws/s3) to protect the data. If the KMS key does not exist in the same account that's issuing the command, you must use the full ARN and not just the ID. 
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
@@ -5395,7 +5403,7 @@ declare namespace S3 {
      */
     SSEKMSEncryptionContext?: SSEKMSEncryptionContext;
     /**
-     * Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using AWS KMS (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS. Specifying this header with a PUT action doesn’t affect bucket-level settings for S3 Bucket Key.
+     * Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS. Specifying this header with a PUT action doesn’t affect bucket-level settings for S3 Bucket Key.
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     RequestPayer?: RequestPayer;
@@ -5846,7 +5854,7 @@ declare namespace S3 {
   export type SSECustomerKeyMD5 = string;
   export interface SSEKMS {
     /**
-     * Specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric encryption customer managed key to use for encrypting inventory reports.
+     * Specifies the ID of the Key Management Service (KMS) symmetric encryption customer managed key to use for encrypting inventory reports.
      */
     KeyId: SSEKMSKeyId;
   }
@@ -6144,11 +6152,11 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric encryption customer managed key that was used for the object.
+     * If present, specifies the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
-     * Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Amazon Web Services KMS (SSE-KMS).
+     * Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     RequestCharged?: RequestCharged;
@@ -6262,11 +6270,11 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric encryption customer managed key was used for the object.
+     * If present, specifies the ID of the Key Management Service (KMS) symmetric encryption customer managed key was used for the object.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
-     * Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Amazon Web Services KMS (SSE-KMS).
+     * Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     RequestCharged?: RequestCharged;