aws-sdk 2.1398.0 → 2.1399.0

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
@@ -1052,11 +1052,11 @@ declare class Connect extends Service {
1052
1052
  */
1053
1053
  replicateInstance(callback?: (err: AWSError, data: Connect.Types.ReplicateInstanceResponse) => void): Request<Connect.Types.ReplicateInstanceResponse, AWSError>;
1054
1054
  /**
1055
- * When a contact is being recorded, and the recording has been suspended using SuspendContactRecording, this API resumes recording the call. Only voice recordings are supported at this time.
1055
+ * When a contact is being recorded, and the recording has been suspended using SuspendContactRecording, this API resumes recording the call or screen. Voice and screen recordings are supported.
1056
1056
  */
1057
1057
  resumeContactRecording(params: Connect.Types.ResumeContactRecordingRequest, callback?: (err: AWSError, data: Connect.Types.ResumeContactRecordingResponse) => void): Request<Connect.Types.ResumeContactRecordingResponse, AWSError>;
1058
1058
  /**
1059
- * When a contact is being recorded, and the recording has been suspended using SuspendContactRecording, this API resumes recording the call. Only voice recordings are supported at this time.
1059
+ * When a contact is being recorded, and the recording has been suspended using SuspendContactRecording, this API resumes recording the call or screen. Voice and screen recordings are supported.
1060
1060
  */
1061
1061
  resumeContactRecording(callback?: (err: AWSError, data: Connect.Types.ResumeContactRecordingResponse) => void): Request<Connect.Types.ResumeContactRecordingResponse, AWSError>;
1062
1062
  /**
@@ -1212,11 +1212,11 @@ declare class Connect extends Service {
1212
1212
  */
1213
1213
  submitContactEvaluation(callback?: (err: AWSError, data: Connect.Types.SubmitContactEvaluationResponse) => void): Request<Connect.Types.SubmitContactEvaluationResponse, AWSError>;
1214
1214
  /**
1215
- * When a contact is being recorded, this API suspends recording the call. For example, you might suspend the call recording while collecting sensitive information, such as a credit card number. Then use ResumeContactRecording to restart recording. The period of time that the recording is suspended is filled with silence in the final recording. Only voice recordings are supported at this time.
1215
+ * When a contact is being recorded, this API suspends recording the call or screen. For example, you might suspend the call or screen recording while collecting sensitive information, such as a credit card number. Then use ResumeContactRecording to restart recording. The period of time that the recording is suspended is filled with silence in the final recording. Voice and screen recordings are supported.
1216
1216
  */
1217
1217
  suspendContactRecording(params: Connect.Types.SuspendContactRecordingRequest, callback?: (err: AWSError, data: Connect.Types.SuspendContactRecordingResponse) => void): Request<Connect.Types.SuspendContactRecordingResponse, AWSError>;
1218
1218
  /**
1219
- * When a contact is being recorded, this API suspends recording the call. For example, you might suspend the call recording while collecting sensitive information, such as a credit card number. Then use ResumeContactRecording to restart recording. The period of time that the recording is suspended is filled with silence in the final recording. Only voice recordings are supported at this time.
1219
+ * When a contact is being recorded, this API suspends recording the call or screen. For example, you might suspend the call or screen recording while collecting sensitive information, such as a credit card number. Then use ResumeContactRecording to restart recording. The period of time that the recording is suspended is filled with silence in the final recording. Voice and screen recordings are supported.
1220
1220
  */
1221
1221
  suspendContactRecording(callback?: (err: AWSError, data: Connect.Types.SuspendContactRecordingResponse) => void): Request<Connect.Types.SuspendContactRecordingResponse, AWSError>;
1222
1222
  /**
@@ -5043,6 +5043,10 @@ declare namespace Connect {
5043
5043
  * Whether outbound calls are enabled.
5044
5044
  */
5045
5045
  OutboundCallsEnabled?: OutboundCallsEnabled;
5046
+ /**
5047
+ * This URL allows contact center users to access Amazon Connect admin website.
5048
+ */
5049
+ InstanceAccessUrl?: Url;
5046
5050
  }
5047
5051
  export type InstanceArn = string;
5048
5052
  export type InstanceAttributeType = "INBOUND_CALLS"|"OUTBOUND_CALLS"|"CONTACTFLOW_LOGS"|"CONTACT_LENS"|"AUTO_RESOLVE_BEST_VOICES"|"USE_CUSTOM_TTS_VOICES"|"EARLY_MEDIA"|"MULTI_PARTY_CONFERENCE"|"HIGH_VOLUME_OUTBOUND"|"ENHANCED_CONTACT_MONITORING"|string;
@@ -5083,7 +5087,7 @@ declare namespace Connect {
5083
5087
  KinesisFirehoseConfig?: KinesisFirehoseConfig;
5084
5088
  }
5085
5089
  export type InstanceStorageConfigs = InstanceStorageConfig[];
5086
- export type InstanceStorageResourceType = "CHAT_TRANSCRIPTS"|"CALL_RECORDINGS"|"SCHEDULED_REPORTS"|"MEDIA_STREAMS"|"CONTACT_TRACE_RECORDS"|"AGENT_EVENTS"|"REAL_TIME_CONTACT_ANALYSIS_SEGMENTS"|"ATTACHMENTS"|"CONTACT_EVALUATIONS"|string;
5090
+ export type InstanceStorageResourceType = "CHAT_TRANSCRIPTS"|"CALL_RECORDINGS"|"SCHEDULED_REPORTS"|"MEDIA_STREAMS"|"CONTACT_TRACE_RECORDS"|"AGENT_EVENTS"|"REAL_TIME_CONTACT_ANALYSIS_SEGMENTS"|"ATTACHMENTS"|"CONTACT_EVALUATIONS"|"SCREEN_RECORDINGS"|string;
5087
5091
  export interface InstanceSummary {
5088
5092
  /**
5089
5093
  * The identifier of the instance.
@@ -5121,6 +5125,10 @@ declare namespace Connect {
5121
5125
  * Whether outbound calls are enabled.
5122
5126
  */
5123
5127
  OutboundCallsEnabled?: OutboundCallsEnabled;
5128
+ /**
5129
+ * This URL allows contact center users to access Amazon Connect admin website.
5130
+ */
5131
+ InstanceAccessUrl?: Url;
5124
5132
  }
5125
5133
  export type InstanceSummaryList = InstanceSummary[];
5126
5134
  export type Integer = number;
@@ -60,11 +60,11 @@ declare class Discovery extends Service {
60
60
  */
61
61
  deleteTags(callback?: (err: AWSError, data: Discovery.Types.DeleteTagsResponse) => void): Request<Discovery.Types.DeleteTagsResponse, AWSError>;
62
62
  /**
63
- * Lists agents or connectors as specified by ID or other filters. All agents/connectors associated with your user account can be listed if you call DescribeAgents as is without passing any parameters.
63
+ * Lists agents or collectors as specified by ID or other filters. All agents/collectors associated with your user can be listed if you call DescribeAgents as is without passing any parameters.
64
64
  */
65
65
  describeAgents(params: Discovery.Types.DescribeAgentsRequest, callback?: (err: AWSError, data: Discovery.Types.DescribeAgentsResponse) => void): Request<Discovery.Types.DescribeAgentsResponse, AWSError>;
66
66
  /**
67
- * Lists agents or connectors as specified by ID or other filters. All agents/connectors associated with your user account can be listed if you call DescribeAgents as is without passing any parameters.
67
+ * Lists agents or collectors as specified by ID or other filters. All agents/collectors associated with your user can be listed if you call DescribeAgents as is without passing any parameters.
68
68
  */
69
69
  describeAgents(callback?: (err: AWSError, data: Discovery.Types.DescribeAgentsResponse) => void): Request<Discovery.Types.DescribeAgentsResponse, AWSError>;
70
70
  /**
@@ -76,11 +76,11 @@ declare class Discovery extends Service {
76
76
  */
77
77
  describeConfigurations(callback?: (err: AWSError, data: Discovery.Types.DescribeConfigurationsResponse) => void): Request<Discovery.Types.DescribeConfigurationsResponse, AWSError>;
78
78
  /**
79
- * Lists exports as specified by ID. All continuous exports associated with your user account can be listed if you call DescribeContinuousExports as is without passing any parameters.
79
+ * Lists exports as specified by ID. All continuous exports associated with your user can be listed if you call DescribeContinuousExports as is without passing any parameters.
80
80
  */
81
81
  describeContinuousExports(params: Discovery.Types.DescribeContinuousExportsRequest, callback?: (err: AWSError, data: Discovery.Types.DescribeContinuousExportsResponse) => void): Request<Discovery.Types.DescribeContinuousExportsResponse, AWSError>;
82
82
  /**
83
- * Lists exports as specified by ID. All continuous exports associated with your user account can be listed if you call DescribeContinuousExports as is without passing any parameters.
83
+ * Lists exports as specified by ID. All continuous exports associated with your user can be listed if you call DescribeContinuousExports as is without passing any parameters.
84
84
  */
85
85
  describeContinuousExports(callback?: (err: AWSError, data: Discovery.Types.DescribeContinuousExportsResponse) => void): Request<Discovery.Types.DescribeContinuousExportsResponse, AWSError>;
86
86
  /**
@@ -108,11 +108,11 @@ declare class Discovery extends Service {
108
108
  */
109
109
  describeImportTasks(callback?: (err: AWSError, data: Discovery.Types.DescribeImportTasksResponse) => void): Request<Discovery.Types.DescribeImportTasksResponse, AWSError>;
110
110
  /**
111
- * Retrieves a list of configuration items that have tags as specified by the key-value pairs, name and value, passed to the optional parameter filters. There are three valid tag filter names: tagKey tagValue configurationId Also, all configuration items associated with your user account that have tags can be listed if you call DescribeTags as is without passing any parameters.
111
+ * Retrieves a list of configuration items that have tags as specified by the key-value pairs, name and value, passed to the optional parameter filters. There are three valid tag filter names: tagKey tagValue configurationId Also, all configuration items associated with your user that have tags can be listed if you call DescribeTags as is without passing any parameters.
112
112
  */
113
113
  describeTags(params: Discovery.Types.DescribeTagsRequest, callback?: (err: AWSError, data: Discovery.Types.DescribeTagsResponse) => void): Request<Discovery.Types.DescribeTagsResponse, AWSError>;
114
114
  /**
115
- * Retrieves a list of configuration items that have tags as specified by the key-value pairs, name and value, passed to the optional parameter filters. There are three valid tag filter names: tagKey tagValue configurationId Also, all configuration items associated with your user account that have tags can be listed if you call DescribeTags as is without passing any parameters.
115
+ * Retrieves a list of configuration items that have tags as specified by the key-value pairs, name and value, passed to the optional parameter filters. There are three valid tag filter names: tagKey tagValue configurationId Also, all configuration items associated with your user that have tags can be listed if you call DescribeTags as is without passing any parameters.
116
116
  */
117
117
  describeTags(callback?: (err: AWSError, data: Discovery.Types.DescribeTagsResponse) => void): Request<Discovery.Types.DescribeTagsResponse, AWSError>;
118
118
  /**
@@ -160,27 +160,27 @@ declare class Discovery extends Service {
160
160
  */
161
161
  startContinuousExport(callback?: (err: AWSError, data: Discovery.Types.StartContinuousExportResponse) => void): Request<Discovery.Types.StartContinuousExportResponse, AWSError>;
162
162
  /**
163
- * Instructs the specified agents or connectors to start collecting data.
163
+ * Instructs the specified agents to start collecting data.
164
164
  */
165
165
  startDataCollectionByAgentIds(params: Discovery.Types.StartDataCollectionByAgentIdsRequest, callback?: (err: AWSError, data: Discovery.Types.StartDataCollectionByAgentIdsResponse) => void): Request<Discovery.Types.StartDataCollectionByAgentIdsResponse, AWSError>;
166
166
  /**
167
- * Instructs the specified agents or connectors to start collecting data.
167
+ * Instructs the specified agents to start collecting data.
168
168
  */
169
169
  startDataCollectionByAgentIds(callback?: (err: AWSError, data: Discovery.Types.StartDataCollectionByAgentIdsResponse) => void): Request<Discovery.Types.StartDataCollectionByAgentIdsResponse, AWSError>;
170
170
  /**
171
- * Begins the export of discovered data to an S3 bucket. If you specify agentIds in a filter, the task exports up to 72 hours of detailed data collected by the identified Application Discovery Agent, including network, process, and performance details. A time range for exported agent data may be set by using startTime and endTime. Export of detailed agent data is limited to five concurrently running exports. If you do not include an agentIds filter, summary data is exported that includes both Amazon Web Services Agentless Discovery Connector data and summary data from Amazon Web Services Discovery Agents. Export of summary data is limited to two exports per day.
171
+ * Begins the export of a discovered data report to an Amazon S3 bucket managed by Amazon Web Services. Exports might provide an estimate of fees and savings based on certain information that you provide. Fee estimates do not include any taxes that might apply. Your actual fees and savings depend on a variety of factors, including your actual usage of Amazon Web Services services, which might vary from the estimates provided in this report. If you do not specify preferences or agentIds in the filter, a summary of all servers, applications, tags, and performance is generated. This data is an aggregation of all server data collected through on-premises tooling, file import, application grouping and applying tags. If you specify agentIds in a filter, the task exports up to 72 hours of detailed data collected by the identified Application Discovery Agent, including network, process, and performance details. A time range for exported agent data may be set by using startTime and endTime. Export of detailed agent data is limited to five concurrently running exports. Export of detailed agent data is limited to two exports per day. If you enable ec2RecommendationsPreferences in preferences , an Amazon EC2 instance matching the characteristics of each server in Application Discovery Service is generated. Changing the attributes of the ec2RecommendationsPreferences changes the criteria of the recommendation.
172
172
  */
173
173
  startExportTask(params: Discovery.Types.StartExportTaskRequest, callback?: (err: AWSError, data: Discovery.Types.StartExportTaskResponse) => void): Request<Discovery.Types.StartExportTaskResponse, AWSError>;
174
174
  /**
175
- * Begins the export of discovered data to an S3 bucket. If you specify agentIds in a filter, the task exports up to 72 hours of detailed data collected by the identified Application Discovery Agent, including network, process, and performance details. A time range for exported agent data may be set by using startTime and endTime. Export of detailed agent data is limited to five concurrently running exports. If you do not include an agentIds filter, summary data is exported that includes both Amazon Web Services Agentless Discovery Connector data and summary data from Amazon Web Services Discovery Agents. Export of summary data is limited to two exports per day.
175
+ * Begins the export of a discovered data report to an Amazon S3 bucket managed by Amazon Web Services. Exports might provide an estimate of fees and savings based on certain information that you provide. Fee estimates do not include any taxes that might apply. Your actual fees and savings depend on a variety of factors, including your actual usage of Amazon Web Services services, which might vary from the estimates provided in this report. If you do not specify preferences or agentIds in the filter, a summary of all servers, applications, tags, and performance is generated. This data is an aggregation of all server data collected through on-premises tooling, file import, application grouping and applying tags. If you specify agentIds in a filter, the task exports up to 72 hours of detailed data collected by the identified Application Discovery Agent, including network, process, and performance details. A time range for exported agent data may be set by using startTime and endTime. Export of detailed agent data is limited to five concurrently running exports. Export of detailed agent data is limited to two exports per day. If you enable ec2RecommendationsPreferences in preferences , an Amazon EC2 instance matching the characteristics of each server in Application Discovery Service is generated. Changing the attributes of the ec2RecommendationsPreferences changes the criteria of the recommendation.
176
176
  */
177
177
  startExportTask(callback?: (err: AWSError, data: Discovery.Types.StartExportTaskResponse) => void): Request<Discovery.Types.StartExportTaskResponse, AWSError>;
178
178
  /**
179
- * Starts an import task, which allows you to import details of your on-premises environment directly into Amazon Web Services Migration Hub without having to use the Application Discovery Service (ADS) tools such as the Discovery Connector or Discovery Agent. This gives you the option to perform migration assessment and planning directly from your imported data, including the ability to group your devices as applications and track their migration status. To start an import request, do this: Download the specially formatted comma separated value (CSV) import template, which you can find here: https://s3.us-west-2.amazonaws.com/templates-7cffcf56-bd96-4b1c-b45b-a5b42f282e46/import_template.csv. Fill out the template with your server and application data. Upload your import file to an Amazon S3 bucket, and make a note of it's Object URL. Your import file must be in the CSV format. Use the console or the StartImportTask command with the Amazon Web Services CLI or one of the Amazon Web Services SDKs to import the records from your file. For more information, including step-by-step procedures, see Migration Hub Import in the Amazon Web Services Application Discovery Service User Guide. There are limits to the number of import tasks you can create (and delete) in an Amazon Web Services account. For more information, see Amazon Web Services Application Discovery Service Limits in the Amazon Web Services Application Discovery Service User Guide.
179
+ * Starts an import task, which allows you to import details of your on-premises environment directly into Amazon Web Services Migration Hub without having to use the Amazon Web Services Application Discovery Service (Application Discovery Service) tools such as the Amazon Web Services Application Discovery Service Agentless Collector or Application Discovery Agent. This gives you the option to perform migration assessment and planning directly from your imported data, including the ability to group your devices as applications and track their migration status. To start an import request, do this: Download the specially formatted comma separated value (CSV) import template, which you can find here: https://s3.us-west-2.amazonaws.com/templates-7cffcf56-bd96-4b1c-b45b-a5b42f282e46/import_template.csv. Fill out the template with your server and application data. Upload your import file to an Amazon S3 bucket, and make a note of it's Object URL. Your import file must be in the CSV format. Use the console or the StartImportTask command with the Amazon Web Services CLI or one of the Amazon Web Services SDKs to import the records from your file. For more information, including step-by-step procedures, see Migration Hub Import in the Amazon Web Services Application Discovery Service User Guide. There are limits to the number of import tasks you can create (and delete) in an Amazon Web Services account. For more information, see Amazon Web Services Application Discovery Service Limits in the Amazon Web Services Application Discovery Service User Guide.
180
180
  */
181
181
  startImportTask(params: Discovery.Types.StartImportTaskRequest, callback?: (err: AWSError, data: Discovery.Types.StartImportTaskResponse) => void): Request<Discovery.Types.StartImportTaskResponse, AWSError>;
182
182
  /**
183
- * Starts an import task, which allows you to import details of your on-premises environment directly into Amazon Web Services Migration Hub without having to use the Application Discovery Service (ADS) tools such as the Discovery Connector or Discovery Agent. This gives you the option to perform migration assessment and planning directly from your imported data, including the ability to group your devices as applications and track their migration status. To start an import request, do this: Download the specially formatted comma separated value (CSV) import template, which you can find here: https://s3.us-west-2.amazonaws.com/templates-7cffcf56-bd96-4b1c-b45b-a5b42f282e46/import_template.csv. Fill out the template with your server and application data. Upload your import file to an Amazon S3 bucket, and make a note of it's Object URL. Your import file must be in the CSV format. Use the console or the StartImportTask command with the Amazon Web Services CLI or one of the Amazon Web Services SDKs to import the records from your file. For more information, including step-by-step procedures, see Migration Hub Import in the Amazon Web Services Application Discovery Service User Guide. There are limits to the number of import tasks you can create (and delete) in an Amazon Web Services account. For more information, see Amazon Web Services Application Discovery Service Limits in the Amazon Web Services Application Discovery Service User Guide.
183
+ * Starts an import task, which allows you to import details of your on-premises environment directly into Amazon Web Services Migration Hub without having to use the Amazon Web Services Application Discovery Service (Application Discovery Service) tools such as the Amazon Web Services Application Discovery Service Agentless Collector or Application Discovery Agent. This gives you the option to perform migration assessment and planning directly from your imported data, including the ability to group your devices as applications and track their migration status. To start an import request, do this: Download the specially formatted comma separated value (CSV) import template, which you can find here: https://s3.us-west-2.amazonaws.com/templates-7cffcf56-bd96-4b1c-b45b-a5b42f282e46/import_template.csv. Fill out the template with your server and application data. Upload your import file to an Amazon S3 bucket, and make a note of it's Object URL. Your import file must be in the CSV format. Use the console or the StartImportTask command with the Amazon Web Services CLI or one of the Amazon Web Services SDKs to import the records from your file. For more information, including step-by-step procedures, see Migration Hub Import in the Amazon Web Services Application Discovery Service User Guide. There are limits to the number of import tasks you can create (and delete) in an Amazon Web Services account. For more information, see Amazon Web Services Application Discovery Service Limits in the Amazon Web Services Application Discovery Service User Guide.
184
184
  */
185
185
  startImportTask(callback?: (err: AWSError, data: Discovery.Types.StartImportTaskResponse) => void): Request<Discovery.Types.StartImportTaskResponse, AWSError>;
186
186
  /**
@@ -192,11 +192,11 @@ declare class Discovery extends Service {
192
192
  */
193
193
  stopContinuousExport(callback?: (err: AWSError, data: Discovery.Types.StopContinuousExportResponse) => void): Request<Discovery.Types.StopContinuousExportResponse, AWSError>;
194
194
  /**
195
- * Instructs the specified agents or connectors to stop collecting data.
195
+ * Instructs the specified agents to stop collecting data.
196
196
  */
197
197
  stopDataCollectionByAgentIds(params: Discovery.Types.StopDataCollectionByAgentIdsRequest, callback?: (err: AWSError, data: Discovery.Types.StopDataCollectionByAgentIdsResponse) => void): Request<Discovery.Types.StopDataCollectionByAgentIdsResponse, AWSError>;
198
198
  /**
199
- * Instructs the specified agents or connectors to stop collecting data.
199
+ * Instructs the specified agents to stop collecting data.
200
200
  */
201
201
  stopDataCollectionByAgentIds(callback?: (err: AWSError, data: Discovery.Types.StopDataCollectionByAgentIdsResponse) => void): Request<Discovery.Types.StopDataCollectionByAgentIdsResponse, AWSError>;
202
202
  /**
@@ -211,11 +211,11 @@ declare class Discovery extends Service {
211
211
  declare namespace Discovery {
212
212
  export interface AgentConfigurationStatus {
213
213
  /**
214
- * The agent/connector ID.
214
+ * The agent ID.
215
215
  */
216
216
  agentId?: String;
217
217
  /**
218
- * Information about the status of the StartDataCollection and StopDataCollection operations. The system has recorded the data collection operation. The agent/connector receives this command the next time it polls for a new command.
218
+ * Information about the status of the StartDataCollection and StopDataCollection operations. The system has recorded the data collection operation. The agent receives this command the next time it polls for a new command.
219
219
  */
220
220
  operationSucceeded?: Boolean;
221
221
  /**
@@ -228,15 +228,15 @@ declare namespace Discovery {
228
228
  export type AgentIds = AgentId[];
229
229
  export interface AgentInfo {
230
230
  /**
231
- * The agent or connector ID.
231
+ * The agent or collector ID.
232
232
  */
233
233
  agentId?: AgentId;
234
234
  /**
235
- * The name of the host where the agent or connector resides. The host can be a server or virtual machine.
235
+ * The name of the host where the agent or collector resides. The host can be a server or virtual machine.
236
236
  */
237
237
  hostName?: String;
238
238
  /**
239
- * Network details about the host where the agent or connector resides.
239
+ * Network details about the host where the agent or collector resides.
240
240
  */
241
241
  agentNetworkInfoList?: AgentNetworkInfoList;
242
242
  /**
@@ -244,19 +244,19 @@ declare namespace Discovery {
244
244
  */
245
245
  connectorId?: String;
246
246
  /**
247
- * The agent or connector version.
247
+ * The agent or collector version.
248
248
  */
249
249
  version?: String;
250
250
  /**
251
- * The health of the agent or connector.
251
+ * The health of the agent.
252
252
  */
253
253
  health?: AgentStatus;
254
254
  /**
255
- * Time since agent or connector health was reported.
255
+ * Time since agent health was reported.
256
256
  */
257
257
  lastHealthPingTime?: String;
258
258
  /**
259
- * Status of the collection process for an agent or connector.
259
+ * Status of the collection process for an agent.
260
260
  */
261
261
  collectionStatus?: String;
262
262
  /**
@@ -270,11 +270,11 @@ declare namespace Discovery {
270
270
  }
271
271
  export interface AgentNetworkInfo {
272
272
  /**
273
- * The IP address for the host where the agent/connector resides.
273
+ * The IP address for the host where the agent/collector resides.
274
274
  */
275
275
  ipAddress?: String;
276
276
  /**
277
- * The MAC address for the host where the agent/connector resides.
277
+ * The MAC address for the host where the agent/collector resides.
278
278
  */
279
279
  macAddress?: String;
280
280
  }
@@ -370,7 +370,7 @@ declare namespace Discovery {
370
370
  */
371
371
  status?: ContinuousExportStatus;
372
372
  /**
373
- * Contains information about any errors that have occurred. This data type can have the following values: ACCESS_DENIED - You don’t have permission to start Data Exploration in Amazon Athena. Contact your Amazon Web Services administrator for help. For more information, see Setting Up Amazon Web Services Application Discovery Service in the Application Discovery Service User Guide. DELIVERY_STREAM_LIMIT_FAILURE - You reached the limit for Amazon Kinesis Data Firehose delivery streams. Reduce the number of streams or request a limit increase and try again. For more information, see Kinesis Data Streams Limits in the Amazon Kinesis Data Streams Developer Guide. FIREHOSE_ROLE_MISSING - The Data Exploration feature is in an error state because your IAM User is missing the AWSApplicationDiscoveryServiceFirehose role. Turn on Data Exploration in Amazon Athena and try again. For more information, see Step 3: Provide Application Discovery Service Access to Non-Administrator Users by Attaching Policies in the Application Discovery Service User Guide. FIREHOSE_STREAM_DOES_NOT_EXIST - The Data Exploration feature is in an error state because your IAM User is missing one or more of the Kinesis data delivery streams. INTERNAL_FAILURE - The Data Exploration feature is in an error state because of an internal failure. Try again later. If this problem persists, contact Amazon Web Services Support. LAKE_FORMATION_ACCESS_DENIED - You don't have sufficient lake formation permissions to start continuous export. For more information, see Upgrading Amazon Web Services Glue Data Permissions to the Amazon Web Services Lake Formation Model in the Amazon Web Services Lake Formation Developer Guide. You can use one of the following two ways to resolve this issue. If you don’t want to use the Lake Formation permission model, you can change the default Data Catalog settings to use only Amazon Web Services Identity and Access Management (IAM) access control for new databases. For more information, see Change Data Catalog Settings in the Lake Formation Developer Guide. You can give the service-linked IAM roles AWSServiceRoleForApplicationDiscoveryServiceContinuousExport and AWSApplicationDiscoveryServiceFirehose the required Lake Formation permissions. For more information, see Granting Database Permissions in the Lake Formation Developer Guide. AWSServiceRoleForApplicationDiscoveryServiceContinuousExport - Grant database creator permissions, which gives the role database creation ability and implicit permissions for any created tables. For more information, see Implicit Lake Formation Permissions in the Lake Formation Developer Guide. AWSApplicationDiscoveryServiceFirehose - Grant describe permissions for all tables in the database. S3_BUCKET_LIMIT_FAILURE - You reached the limit for Amazon S3 buckets. Reduce the number of S3 buckets or request a limit increase and try again. For more information, see Bucket Restrictions and Limitations in the Amazon Simple Storage Service Developer Guide. S3_NOT_SIGNED_UP - Your account is not signed up for the Amazon S3 service. You must sign up before you can use Amazon S3. You can sign up at the following URL: https://aws.amazon.com/s3.
373
+ * Contains information about any errors that have occurred. This data type can have the following values: ACCESS_DENIED - You don’t have permission to start Data Exploration in Amazon Athena. Contact your Amazon Web Services administrator for help. For more information, see Setting Up Amazon Web Services Application Discovery Service in the Application Discovery Service User Guide. DELIVERY_STREAM_LIMIT_FAILURE - You reached the limit for Amazon Kinesis Data Firehose delivery streams. Reduce the number of streams or request a limit increase and try again. For more information, see Kinesis Data Streams Limits in the Amazon Kinesis Data Streams Developer Guide. FIREHOSE_ROLE_MISSING - The Data Exploration feature is in an error state because your user is missing the Amazon Web ServicesApplicationDiscoveryServiceFirehose role. Turn on Data Exploration in Amazon Athena and try again. For more information, see Creating the Amazon Web ServicesApplicationDiscoveryServiceFirehose Role in the Application Discovery Service User Guide. FIREHOSE_STREAM_DOES_NOT_EXIST - The Data Exploration feature is in an error state because your user is missing one or more of the Kinesis data delivery streams. INTERNAL_FAILURE - The Data Exploration feature is in an error state because of an internal failure. Try again later. If this problem persists, contact Amazon Web Services Support. LAKE_FORMATION_ACCESS_DENIED - You don't have sufficient lake formation permissions to start continuous export. For more information, see Upgrading Amazon Web Services Glue Data Permissions to the Amazon Web Services Lake Formation Model in the Amazon Web Services Lake Formation Developer Guide. You can use one of the following two ways to resolve this issue. If you don’t want to use the Lake Formation permission model, you can change the default Data Catalog settings to use only Amazon Web Services Identity and Access Management (IAM) access control for new databases. For more information, see Change Data Catalog Settings in the Lake Formation Developer Guide. You can give the service-linked IAM roles AWSServiceRoleForApplicationDiscoveryServiceContinuousExport and AWSApplicationDiscoveryServiceFirehose the required Lake Formation permissions. For more information, see Granting Database Permissions in the Lake Formation Developer Guide. AWSServiceRoleForApplicationDiscoveryServiceContinuousExport - Grant database creator permissions, which gives the role database creation ability and implicit permissions for any created tables. For more information, see Implicit Lake Formation Permissions in the Lake Formation Developer Guide. AWSApplicationDiscoveryServiceFirehose - Grant describe permissions for all tables in the database. S3_BUCKET_LIMIT_FAILURE - You reached the limit for Amazon S3 buckets. Reduce the number of S3 buckets or request a limit increase and try again. For more information, see Bucket Restrictions and Limitations in the Amazon Simple Storage Service Developer Guide. S3_NOT_SIGNED_UP - Your account is not signed up for the Amazon S3 service. You must sign up before you can use Amazon S3. You can sign up at the following URL: https://aws.amazon.com/s3.
374
374
  */
375
375
  statusDetail?: StringMax255;
376
376
  /**
@@ -456,12 +456,33 @@ declare namespace Discovery {
456
456
  unknownAgents: Integer;
457
457
  }
458
458
  export interface CustomerAgentlessCollectorInfo {
459
+ /**
460
+ * The number of active Agentless Collector collectors.
461
+ */
459
462
  activeAgentlessCollectors: Integer;
463
+ /**
464
+ * The number of healthy Agentless Collector collectors.
465
+ */
460
466
  healthyAgentlessCollectors: Integer;
467
+ /**
468
+ * The number of deny-listed Agentless Collector collectors.
469
+ */
461
470
  denyListedAgentlessCollectors: Integer;
471
+ /**
472
+ * The number of Agentless Collector collectors with SHUTDOWN status.
473
+ */
462
474
  shutdownAgentlessCollectors: Integer;
475
+ /**
476
+ * The number of unhealthy Agentless Collector collectors.
477
+ */
463
478
  unhealthyAgentlessCollectors: Integer;
479
+ /**
480
+ * The total number of Agentless Collector collectors.
481
+ */
464
482
  totalAgentlessCollectors: Integer;
483
+ /**
484
+ * The number of unknown Agentless Collector collectors.
485
+ */
465
486
  unknownAgentlessCollectors: Integer;
466
487
  }
467
488
  export interface CustomerConnectorInfo {
@@ -548,7 +569,7 @@ declare namespace Discovery {
548
569
  }
549
570
  export interface DescribeAgentsRequest {
550
571
  /**
551
- * The agent or the Connector IDs for which you want information. If you specify no IDs, the system returns information about all agents/Connectors associated with your Amazon Web Services user account.
572
+ * The agent or the collector IDs for which you want information. If you specify no IDs, the system returns information about all agents/collectors associated with your user.
552
573
  */
553
574
  agentIds?: AgentIds;
554
575
  /**
@@ -556,7 +577,7 @@ declare namespace Discovery {
556
577
  */
557
578
  filters?: Filters;
558
579
  /**
559
- * The total number of agents/Connectors to return in a single page of output. The maximum value is 100.
580
+ * The total number of agents/collectors to return in a single page of output. The maximum value is 100.
560
581
  */
561
582
  maxResults?: Integer;
562
583
  /**
@@ -566,7 +587,7 @@ declare namespace Discovery {
566
587
  }
567
588
  export interface DescribeAgentsResponse {
568
589
  /**
569
- * Lists agents or the Connector by ID or lists all agents/Connectors associated with your user account if you did not specify an agent/Connector ID. The output includes agent/Connector IDs, IP addresses, media access control (MAC) addresses, agent/Connector health, host name where the agent/Connector resides, and the version number of each agent/Connector.
590
+ * Lists agents or the collector by ID or lists all agents/collectors associated with your user, if you did not specify an agent/collector ID. The output includes agent/collector IDs, IP addresses, media access control (MAC) addresses, agent/collector health, host name where the agent/collector resides, and the version number of each agent/collector.
570
591
  */
571
592
  agentsInfo?: AgentsInfo;
572
593
  /**
@@ -727,14 +748,47 @@ declare namespace Discovery {
727
748
  }
728
749
  export interface DisassociateConfigurationItemsFromApplicationResponse {
729
750
  }
751
+ export type EC2InstanceType = string;
752
+ export interface Ec2RecommendationsExportPreferences {
753
+ /**
754
+ * If set to true, the export preferences is set to Ec2RecommendationsExportPreferences.
755
+ */
756
+ enabled?: ExportEnabled;
757
+ /**
758
+ * The recommended EC2 instance type that matches the CPU usage metric of server performance data.
759
+ */
760
+ cpuPerformanceMetricBasis?: UsageMetricBasis;
761
+ /**
762
+ * The recommended EC2 instance type that matches the Memory usage metric of server performance data.
763
+ */
764
+ ramPerformanceMetricBasis?: UsageMetricBasis;
765
+ /**
766
+ * The target tenancy to use for your recommended EC2 instances.
767
+ */
768
+ tenancy?: Tenancy;
769
+ /**
770
+ * An array of instance types to exclude from recommendations.
771
+ */
772
+ excludedInstanceTypes?: ExcludedInstanceTypes;
773
+ /**
774
+ * The target Amazon Web Services Region for the recommendations. You can use any of the Region codes available for the chosen service, as listed in Amazon Web Services service endpoints in the Amazon Web Services General Reference.
775
+ */
776
+ preferredRegion?: UserPreferredRegion;
777
+ /**
778
+ * The contract type for a reserved instance. If blank, we assume an On-Demand instance is preferred.
779
+ */
780
+ reservedInstanceOptions?: ReservedInstanceOptions;
781
+ }
782
+ export type ExcludedInstanceTypes = EC2InstanceType[];
730
783
  export interface ExportConfigurationsResponse {
731
784
  /**
732
785
  * A unique identifier that you can use to query the export status.
733
786
  */
734
787
  exportId?: ConfigurationsExportId;
735
788
  }
736
- export type ExportDataFormat = "CSV"|"GRAPHML"|string;
789
+ export type ExportDataFormat = "CSV"|string;
737
790
  export type ExportDataFormats = ExportDataFormat[];
791
+ export type ExportEnabled = boolean;
738
792
  export interface ExportFilter {
739
793
  /**
740
794
  * A single ExportFilter name. Supported filters: agentIds.
@@ -785,6 +839,12 @@ declare namespace Discovery {
785
839
  */
786
840
  requestedEndTime?: TimeStamp;
787
841
  }
842
+ export interface ExportPreferences {
843
+ /**
844
+ * If enabled, exported data includes EC2 instance type matches for on-premises servers discovered through Amazon Web Services Application Discovery Service.
845
+ */
846
+ ec2RecommendationsPreferences?: Ec2RecommendationsExportPreferences;
847
+ }
788
848
  export type ExportRequestTime = Date;
789
849
  export type ExportStatus = "FAILED"|"SUCCEEDED"|"IN_PROGRESS"|string;
790
850
  export type ExportStatusMessage = string;
@@ -838,6 +898,9 @@ declare namespace Discovery {
838
898
  * Details about Migration Evaluator collectors, including collector status and health.
839
899
  */
840
900
  meCollectorSummary?: CustomerMeCollectorInfo;
901
+ /**
902
+ * Details about Agentless Collector collectors, including status.
903
+ */
841
904
  agentlessCollectorSummary?: CustomerAgentlessCollectorInfo;
842
905
  }
843
906
  export type ImportStatus = "IMPORT_IN_PROGRESS"|"IMPORT_COMPLETE"|"IMPORT_COMPLETE_WITH_ERRORS"|"IMPORT_FAILED"|"IMPORT_FAILED_SERVER_LIMIT_EXCEEDED"|"IMPORT_FAILED_RECORD_LIMIT_EXCEEDED"|"DELETE_IN_PROGRESS"|"DELETE_COMPLETE"|"DELETE_FAILED"|"DELETE_FAILED_LIMIT_EXCEEDED"|"INTERNAL_ERROR"|string;
@@ -1006,6 +1069,7 @@ declare namespace Discovery {
1006
1069
  }
1007
1070
  export type NeighborDetailsList = NeighborConnectionDetail[];
1008
1071
  export type NextToken = string;
1072
+ export type OfferingClass = "STANDARD"|"CONVERTIBLE"|string;
1009
1073
  export interface OrderByElement {
1010
1074
  /**
1011
1075
  * The field on which to order.
@@ -1018,6 +1082,21 @@ declare namespace Discovery {
1018
1082
  }
1019
1083
  export type OrderByElementFieldName = string;
1020
1084
  export type OrderByList = OrderByElement[];
1085
+ export type PurchasingOption = "ALL_UPFRONT"|"PARTIAL_UPFRONT"|"NO_UPFRONT"|string;
1086
+ export interface ReservedInstanceOptions {
1087
+ /**
1088
+ * The payment plan to use for your Reserved Instance.
1089
+ */
1090
+ purchasingOption: PurchasingOption;
1091
+ /**
1092
+ * The flexibility to change the instance types needed for your Reserved Instance.
1093
+ */
1094
+ offeringClass: OfferingClass;
1095
+ /**
1096
+ * The preferred duration of the Reserved Instance term.
1097
+ */
1098
+ termLength: TermLength;
1099
+ }
1021
1100
  export type S3Bucket = string;
1022
1101
  export type S3PresignedUrl = string;
1023
1102
  export type SchemaStorageConfig = {[key: string]: String};
@@ -1047,13 +1126,13 @@ declare namespace Discovery {
1047
1126
  }
1048
1127
  export interface StartDataCollectionByAgentIdsRequest {
1049
1128
  /**
1050
- * The IDs of the agents or connectors from which to start collecting data. If you send a request to an agent/connector ID that you do not have permission to contact, according to your Amazon Web Services account, the service does not throw an exception. Instead, it returns the error in the Description field. If you send a request to multiple agents/connectors and you do not have permission to contact some of those agents/connectors, the system does not throw an exception. Instead, the system shows Failed in the Description field.
1129
+ * The IDs of the agents from which to start collecting data. If you send a request to an agent ID that you do not have permission to contact, according to your Amazon Web Services account, the service does not throw an exception. Instead, it returns the error in the Description field. If you send a request to multiple agents and you do not have permission to contact some of those agents, the system does not throw an exception. Instead, the system shows Failed in the Description field.
1051
1130
  */
1052
1131
  agentIds: AgentIds;
1053
1132
  }
1054
1133
  export interface StartDataCollectionByAgentIdsResponse {
1055
1134
  /**
1056
- * Information about agents or the connector that were instructed to start collecting data. Information includes the agent/connector ID, a description of the operation performed, and whether the agent/connector configuration was updated.
1135
+ * Information about agents that were instructed to start collecting data. Information includes the agent ID, a description of the operation performed, and whether the agent configuration was updated.
1057
1136
  */
1058
1137
  agentsConfigurationStatus?: AgentConfigurationStatusList;
1059
1138
  }
@@ -1063,7 +1142,7 @@ declare namespace Discovery {
1063
1142
  */
1064
1143
  exportDataFormat?: ExportDataFormats;
1065
1144
  /**
1066
- * If a filter is present, it selects the single agentId of the Application Discovery Agent for which data is exported. The agentId can be found in the results of the DescribeAgents API or CLI. If no filter is present, startTime and endTime are ignored and exported data includes both Agentless Discovery Connector data and summary data from Application Discovery agents.
1145
+ * If a filter is present, it selects the single agentId of the Application Discovery Agent for which data is exported. The agentId can be found in the results of the DescribeAgents API or CLI. If no filter is present, startTime and endTime are ignored and exported data includes both Amazon Web Services Application Discovery Service Agentless Collector collectors data and summary data from Application Discovery Agent agents.
1067
1146
  */
1068
1147
  filters?: ExportFilters;
1069
1148
  /**
@@ -1074,6 +1153,10 @@ declare namespace Discovery {
1074
1153
  * The end timestamp for exported data from the single Application Discovery Agent selected in the filters. If no value is specified, exported data includes the most recent data collected by the agent.
1075
1154
  */
1076
1155
  endTime?: TimeStamp;
1156
+ /**
1157
+ * Indicates the type of data that needs to be exported. Only one ExportPreferences can be enabled at any time.
1158
+ */
1159
+ preferences?: ExportPreferences;
1077
1160
  }
1078
1161
  export interface StartExportTaskResponse {
1079
1162
  /**
@@ -1119,13 +1202,13 @@ declare namespace Discovery {
1119
1202
  }
1120
1203
  export interface StopDataCollectionByAgentIdsRequest {
1121
1204
  /**
1122
- * The IDs of the agents or connectors from which to stop collecting data.
1205
+ * The IDs of the agents from which to stop collecting data.
1123
1206
  */
1124
1207
  agentIds: AgentIds;
1125
1208
  }
1126
1209
  export interface StopDataCollectionByAgentIdsResponse {
1127
1210
  /**
1128
- * Information about the agents or connector that were instructed to stop collecting data. Information includes the agent/connector ID, a description of the operation performed, and whether the agent/connector configuration was updated.
1211
+ * Information about the agents that were instructed to stop collecting data. Information includes the agent ID, a description of the operation performed, and whether the agent configuration was updated.
1129
1212
  */
1130
1213
  agentsConfigurationStatus?: AgentConfigurationStatusList;
1131
1214
  }
@@ -1155,6 +1238,8 @@ declare namespace Discovery {
1155
1238
  export type TagKey = string;
1156
1239
  export type TagSet = Tag[];
1157
1240
  export type TagValue = string;
1241
+ export type Tenancy = "DEDICATED"|"SHARED"|string;
1242
+ export type TermLength = "ONE_YEAR"|"THREE_YEAR"|string;
1158
1243
  export type TimeStamp = Date;
1159
1244
  export type ToDeleteIdentifierList = ImportTaskIdentifier[];
1160
1245
  export interface UpdateApplicationRequest {
@@ -1173,6 +1258,19 @@ declare namespace Discovery {
1173
1258
  }
1174
1259
  export interface UpdateApplicationResponse {
1175
1260
  }
1261
+ export interface UsageMetricBasis {
1262
+ /**
1263
+ * A utilization metric that is used by the recommendations.
1264
+ */
1265
+ name?: UsageMetricBasisName;
1266
+ /**
1267
+ * Specifies the percentage of the specified utilization metric that is used by the recommendations.
1268
+ */
1269
+ percentageAdjust?: UsageMetricPercentageAdjust;
1270
+ }
1271
+ export type UsageMetricBasisName = string;
1272
+ export type UsageMetricPercentageAdjust = number;
1273
+ export type UserPreferredRegion = string;
1176
1274
  export type orderString = "ASC"|"DESC"|string;
1177
1275
  /**
1178
1276
  * A string in YYYY-MM-DD format that represents the latest possible API version that can be used in this service. Specify 'latest' to use the latest possible version.
package/clients/iam.d.ts CHANGED
@@ -785,11 +785,11 @@ declare class IAM extends Service {
785
785
  */
786
786
  listRoleTags(callback?: (err: AWSError, data: IAM.Types.ListRoleTagsResponse) => void): Request<IAM.Types.ListRoleTagsResponse, AWSError>;
787
787
  /**
788
- * Lists the IAM roles that have the specified path prefix. If there are none, the operation returns an empty list. For more information about roles, see Working with roles. IAM resource-listing operations return a subset of the available attributes for the resource. For example, this operation does not return tags, even though they are an attribute of the returned object. To view all of the information for a role, see GetRole. You can paginate the results using the MaxItems and Marker parameters.
788
+ * Lists the IAM roles that have the specified path prefix. If there are none, the operation returns an empty list. For more information about roles, see Working with roles. IAM resource-listing operations return a subset of the available attributes for the resource. This operation does not return the following attributes, even though they are an attribute of the returned object: PermissionsBoundary RoleLastUsed Tags To view all of the information for a role, see GetRole. You can paginate the results using the MaxItems and Marker parameters.
789
789
  */
790
790
  listRoles(params: IAM.Types.ListRolesRequest, callback?: (err: AWSError, data: IAM.Types.ListRolesResponse) => void): Request<IAM.Types.ListRolesResponse, AWSError>;
791
791
  /**
792
- * Lists the IAM roles that have the specified path prefix. If there are none, the operation returns an empty list. For more information about roles, see Working with roles. IAM resource-listing operations return a subset of the available attributes for the resource. For example, this operation does not return tags, even though they are an attribute of the returned object. To view all of the information for a role, see GetRole. You can paginate the results using the MaxItems and Marker parameters.
792
+ * Lists the IAM roles that have the specified path prefix. If there are none, the operation returns an empty list. For more information about roles, see Working with roles. IAM resource-listing operations return a subset of the available attributes for the resource. This operation does not return the following attributes, even though they are an attribute of the returned object: PermissionsBoundary RoleLastUsed Tags To view all of the information for a role, see GetRole. You can paginate the results using the MaxItems and Marker parameters.
793
793
  */
794
794
  listRoles(callback?: (err: AWSError, data: IAM.Types.ListRolesResponse) => void): Request<IAM.Types.ListRolesResponse, AWSError>;
795
795
  /**
@@ -865,11 +865,11 @@ declare class IAM extends Service {
865
865
  */
866
866
  listUserTags(callback?: (err: AWSError, data: IAM.Types.ListUserTagsResponse) => void): Request<IAM.Types.ListUserTagsResponse, AWSError>;
867
867
  /**
868
- * Lists the IAM users that have the specified path prefix. If no path prefix is specified, the operation returns all users in the Amazon Web Services account. If there are none, the operation returns an empty list. IAM resource-listing operations return a subset of the available attributes for the resource. For example, this operation does not return tags, even though they are an attribute of the returned object. To view all of the information for a user, see GetUser. You can paginate the results using the MaxItems and Marker parameters.
868
+ * Lists the IAM users that have the specified path prefix. If no path prefix is specified, the operation returns all users in the Amazon Web Services account. If there are none, the operation returns an empty list. IAM resource-listing operations return a subset of the available attributes for the resource. This operation does not return the following attributes, even though they are an attribute of the returned object: PermissionsBoundary Tags To view all of the information for a user, see GetUser. You can paginate the results using the MaxItems and Marker parameters.
869
869
  */
870
870
  listUsers(params: IAM.Types.ListUsersRequest, callback?: (err: AWSError, data: IAM.Types.ListUsersResponse) => void): Request<IAM.Types.ListUsersResponse, AWSError>;
871
871
  /**
872
- * Lists the IAM users that have the specified path prefix. If no path prefix is specified, the operation returns all users in the Amazon Web Services account. If there are none, the operation returns an empty list. IAM resource-listing operations return a subset of the available attributes for the resource. For example, this operation does not return tags, even though they are an attribute of the returned object. To view all of the information for a user, see GetUser. You can paginate the results using the MaxItems and Marker parameters.
872
+ * Lists the IAM users that have the specified path prefix. If no path prefix is specified, the operation returns all users in the Amazon Web Services account. If there are none, the operation returns an empty list. IAM resource-listing operations return a subset of the available attributes for the resource. This operation does not return the following attributes, even though they are an attribute of the returned object: PermissionsBoundary Tags To view all of the information for a user, see GetUser. You can paginate the results using the MaxItems and Marker parameters.
873
873
  */
874
874
  listUsers(callback?: (err: AWSError, data: IAM.Types.ListUsersResponse) => void): Request<IAM.Types.ListUsersResponse, AWSError>;
875
875
  /**