agent-workbench 0.8.1 → 0.9.0

package/dist/web/assets/zh-CN-Xcl7z1Nt.js

@@ -1 +0,0 @@
-const e={"agent.composer.imagesRefused":"此 CLI 不接受从输入框发送的图片。","agent.continue.discovering":"此会话尚未出现在历史记录中：发送第一条消息后才会出现。","agent.continue.noConversation":"此标签页还没有可继续的对话。","agent.continue.noMessages":"此对话还没有可继续的消息。","agent.continue.title":"用另一个 CLI 继续此对话","agent.continue.titleMain":"在主文件夹中继续此对话","agent.dot.idle":"就绪，没有正在进行的任务","agent.dot.noStatus":"此 CLI 不提供状态信息","agent.dot.open":"CLI 已打开","agent.dot.statusLineOnly":"此 CLI 仅在配置了 status line 后才提供状态信息","agent.dot.statusLinePending":"status line 尚未提供此对话的状态","agent.handoff.notice":"本对话接续自 {{label}}：代理从一份包含{{turns}}的对话记录开始，而不是从原有的上下文开始。工具结果已截断，图片不会一并带过来。","agent.handoff.prefill.noDelivery":"消息已放入输入框：请检查后按 Enter 发送。","agent.handoff.prefill.notReady":"CLI 未能及时就绪：消息已放入输入框，请手动发送。","agent.handoff.prefill.sendFailed":"无法自动发送：消息已放入输入框，请手动发送。","agent.handoff.sending":"正在发送接续内容…","agent.handoff.tabLabel":"接续：{{title}}","agent.handoff.tabLabelNoTitle":"接续的对话","agent.handoff.turns.all_other":"全部 {{count}} 轮","agent.handoff.turns.lastManyOfMore_other":"最后 {{included}} 轮（共超过 {{count}} 轮）","agent.handoff.turns.lastMany_other":"最后 {{included}} 轮（共 {{count}} 轮）","agent.handoff.turns.lastOne":"最后一轮（共 {{total}} 轮）","agent.handoff.turns.lastOneOfMore":"最后一轮（共超过 {{total}} 轮）","agent.handoff.turns.single":"唯一一轮","agent.meter.idle.compacted":"上下文在最后一次测得的回复之后已压缩。新的用量会随下一次回复出现。","agent.meter.idle.noFile":"此会话尚未测得任何回复的用量。用量并非从零开始：系统提示词、工具和项目的指令文件都已占用上下文，实际数值会随第一次回复出现。","agent.meter.idle.statusLine":"status line 尚未提供此对话的 token 用量。用量并非从零开始：数值会在 CLI 运行 status line 时出现，即发送第一条消息或恢复会话时。","agent.meter.idle.withFile":"此会话尚未测得任何回复的用量。用量并非从零开始：系统提示词、工具和 {{file}} 都已占用上下文，实际数值会随第一次回复出现。","agent.meter.origin.catalog":"上限来自 CLI 的模型目录","agent.meter.origin.estimated":"上限根据测得的 token 推算","agent.meter.setup.disabled":"此 CLI 仅通过其 status line 提供 token 用量，而本应用的 status line 已被禁用。点击“配置”查看设置方法。","agent.meter.setup.missing":"此 CLI 仅通过其 status line 提供 token 用量，但 status line 尚未配置。点击“配置”查看设置方法。","agent.meter.setup.otherCommand":"此 CLI 仅通过其 status line 提供 token 用量，而你已配置了另一个 status line。点击“配置”查看设置方法。","agent.meter.setup.unreadable":"此 CLI 仅通过其 status line 提供 token 用量，但无法读取它的 settings.json。点击“配置”查看设置方法。","agent.mode.blocked":"CLI 中有一个待处理的确认：现在切换模式会批准它。请在 CLI 标签页中回应。","agent.mode.title":"{{mode}}模式：{{hint}}。切换模式会向 CLI 标签页发送 {{key}}","agent.mode.titleBlind":"{{title}}。没有 status line 数据，本应用无法判断是否有待处理的确认；如果此时切换模式，就会批准该确认","agent.note.empty":"笔记为空","agent.note.needsTab":"请先打开一个标签页：对话会在该标签页的项目中打开","agent.note.noReadySignal":"此标签页的 CLI 不会告知何时就绪，因此无法发送笔记","agent.note.send":"在 {{cwd}} 中新建对话，并将笔记发送给代理","agent.openBlocked":"正在此项目中打开标签页…","agent.openTool.noLabel":"CLI 有一个尚未返回结果的工具调用：它可能正在请求批准。请在 CLI 标签页中回应。","agent.openTool.withLabel":"{{label}} 有一个尚未返回结果的工具调用：它可能正在请求批准。请在 CLI 标签页中回应。","agent.queueReturned.noLabel":"CLI 还没来得及处理你在它工作时发送的消息就被中断了。消息已放回输入框，尚未发送。","agent.queueReturned.withLabel":"{{label}} 还没来得及处理你在它工作时发送的消息就被中断了。消息已放回输入框，尚未发送。","agent.serverClosed.noLabel":"CLI 服务器已关闭，此标签页已断开连接。","agent.serverClosed.relaunch":"重新启动","agent.serverClosed.relaunching":"正在重新启动…","agent.serverClosed.withLabel":"{{label}} 服务器已关闭，此标签页已断开连接。","agent.session.cliMissing":"{{label}} 未安装。","agent.shortcuts.antigravity.answerPermission":"回应权限请求：1 允许，4 拒绝","agent.shortcuts.antigravity.cycleMode":"切换模式：accept-edits、plan 和 default（焦点在终端时）","agent.shortcuts.antigravity.help":"显示 CLI 的快捷键","agent.shortcuts.antigravity.interrupt":"中断当前轮次，或取消权限请求","agent.shortcuts.claudeCode.cancel":"取消","agent.shortcuts.claudeCode.cycleMode":"切换权限模式（焦点在终端时）","agent.shortcuts.claudeCode.fullOutput":"显示完整输出","agent.shortcuts.claudeCode.pasteImage":"从剪贴板粘贴图片","agent.shortcuts.claudeCode.pasteText":"从剪贴板粘贴文本","agent.shortcuts.claudeCode.rewind":"打开回退菜单","agent.shortcuts.claudeCode.searchHistory":"搜索命令历史记录","agent.shortcuts.codex.cycleMode":"在默认模式和 Plan 模式之间切换（焦点在终端时）","agent.shortcuts.codex.editPrevious":"编辑之前的消息","agent.shortcuts.codex.effort":"降低 / 提高推理强度","agent.shortcuts.codex.externalEditor":"在外部编辑器中编辑消息","agent.shortcuts.codex.interruptOrExit":"中断；没有进行中的轮次时则退出","agent.shortcuts.codex.interruptTurn":"中断当前轮次","agent.shortcuts.codex.mention":"提及文件、技能或插件","agent.shortcuts.codex.note":"在 Codex 中，Alt + ← / → 用于切换代理，但在这里，本应用用它们来切换标签页。","agent.shortcuts.codex.queue":"代理工作时将消息加入队列","agent.shortcuts.codex.searchHistory":"搜索消息历史记录","agent.shortcuts.codex.transcript":"显示对话记录","agent.shortcuts.commands":"命令","agent.shortcuts.composer.newline":"换行（不发送）","agent.shortcuts.composer.pasteText":"粘贴文本","agent.shortcuts.composer.pasteWithImages":"粘贴文本或图片（图片以缩略图显示）","agent.shortcuts.composer.send":"发送消息","agent.shortcuts.interruptCli":"中断 CLI 正在进行的操作","agent.shortcuts.leaderThen":"Ctrl + X，然后按 {{key}}","agent.shortcuts.opencode.clearInput":"清空输入；按两次则退出","agent.shortcuts.opencode.commandList":"命令列表（含模型变体）","agent.shortcuts.opencode.cycleAgent":"切换代理：build 或 plan（焦点在终端时）","agent.shortcuts.opencode.interrupt":"中断（第一次按只会提示）","agent.shortcuts.opencode.model":"选择模型","agent.shortcuts.opencode.newSession":"新建会话：标签页仍与打开时的会话绑定","agent.shortcuts.opencode.newline":"换行","agent.shortcuts.opencode.note":"在 OpenCode 中，Ctrl + T 用于切换模型变体，但浏览器会占用这个快捷键：可以在 Ctrl + P 中找到该功能。","agent.shortcuts.opencode.paste":"粘贴","agent.shortcuts.pi.bash":"运行 shell 命令","agent.shortcuts.pi.clearOrExit":"清空编辑器；按两次则退出","agent.shortcuts.pi.cycleThinking":"切换思考级别（焦点在终端时）","agent.shortcuts.pi.model":"选择模型","agent.shortcuts.pi.newline":"换行","agent.shortcuts.pi.nextModel":"切换到下一个模型","agent.shortcuts.pi.toolOutput":"折叠或展开工具输出","agent.shortcuts.pi.tree":"编辑器为空时：打开会话树","agent.statusLine.noFragment":"本应用的文件夹路径中含有会被控制台解释的字符（例如 & % ! 或引号），因此无法生成 CLI 能运行的命令行：在 Windows 上，CLI 通过 cmd /c 运行它，任何引号都无法传递过去。将配置文件夹移到不含这些字符的路径即可解决。","agent.statusLine.state.active":"已配置","agent.statusLine.state.disabled":"已禁用（enabled: false）","agent.statusLine.state.missing":"未配置","agent.statusLine.state.otherCommand":"你已配置了另一个 status line：粘贴这一行会替换它","agent.statusLine.state.unreadable":"无法读取 settings.json","agent.stoppedEarly":"你在代理开始之前就停止了：消息已放回输入框，可以修改后再发送。","agent.thread.discovering":"发送第一条消息后，会话就会出现在历史记录中。","agent.thread.noTranscript":"此对话来自一个不会留下可读对话记录的 CLI 版本。可以从侧边栏恢复它，但这里没有可显示的内容。","agent.waiting.answer":"CLI 正在等待你的回答。","agent.waiting.permission":"CLI 正在等待你授权使用某个工具。","agent.waiting.question":"代理向你提了一个问题：请在对话中回答。","agentMenu.chooseTitle":"选择要用哪个 CLI 打开","agentMenu.openWith":"打开方式","agentMenu.titleWithAgent":"{{title}} — 使用 {{label}}","app.banner.revoked":"此设备的访问已被撤销，或远程访问已关闭。要重新使用，请在运行 Agent Workbench 的电脑上重新配对。","app.divider.consoleHeight":"拖动以调整控制台高度","app.divider.width":"拖动以调整宽度","app.empty.hint":"在左侧选择一个项目，或从历史记录中打开一个会话以恢复它。","app.empty.newSession":"在 {{cwd}} 中新建会话","app.empty.noTabs":"没有打开的标签页。","app.empty.opening":"正在打开…","app.header.cliVersion":"CLI {{version}}","app.header.remoteAccess":"远程访问","app.header.remoteBadge":"远程","app.header.remoteBadgeTitle":"此窗口是从已配对的设备连接的。管理远程访问，以及任何用运行 Agent Workbench 的那台电脑上的应用打开文件的操作，只能在那台电脑上进行。","app.header.shortcuts":"显示键盘快捷键","app.markerNotice":"此服务器是在某个 CLI 会话内部启动的。已从各标签页的环境中移除 <code>{{variable}}</code> 变量：该变量会关闭历史记录的保存，而没有历史记录就不会有对话和上下文用量。环境的其余部分保持不变。","app.panel.name":"面板","app.panel.show":"显示右侧面板（Alt+P）","app.picker.project.confirm":"在此打开","app.picker.project.confirmTitle":"在 {{path}} 中打开代理标签页","app.picker.project.title":"新建项目","app.picker.vault.confirm":"使用此文件夹","app.picker.vault.confirmTitle":"将备份移动到 {{path}}。当前文件夹保持不变","app.picker.vault.title":"备份文件夹","app.sidebar.name":"项目","app.sidebar.show":"显示项目列表","app.status.connecting":"正在连接","app.status.failed":"未连接","app.status.open":"已连接","app.status.reconnecting":"正在重新连接","app.status.revoked":"访问已撤销","archive.allBlocked_other":"此项目的所有对话（{{count}} 个）都有打开的标签页。请先关闭标签页。","archive.blockedStays_other":"另有 {{count}} 个对话有打开的标签页，将被保留。","archive.confirm_other":"归档这 {{count}} 个对话？","archive.withBlocked":"{{confirm}}{{blocked}}","common.cancel":"取消","common.close":"关闭","common.closeEsc":"关闭（Esc）","common.copied":"已复制","common.copyCode":"复制代码","common.dismissNotice":"关闭此提示","common.gotIt":"知道了","composer.attach":"附加文件","composer.attachTitle":"附加文件：日志、PDF、文档或图片","composer.chip.editHint":"查看和编辑粘贴的文本","composer.chip.editorLabel":"编辑粘贴的文本 #{{number}}","composer.chip.pastedTextEmpty":"#{{number}} · 粘贴的文本 · 为空，不会发送","composer.chip.pastedText_other":"#{{number}} · 粘贴的文本 · {{count}} 行","composer.chip.remove":"移除","composer.pastedImage":"粘贴的图片","composer.placeholder.ended":"此标签页的会话已结束。","composer.placeholder.ready":"输入消息","composer.placeholder.sleeping":"此标签页尚未打开 CLI。","composer.problem.draftTooLong":"这条消息太长，无法保存为草稿：如果在发送前关闭 Agent Workbench，它就会丢失。","composer.problem.empty":"“{{name}}”为空。","composer.problem.imageTooBig":"图片大小为 {{size}} MB，上限为 {{max}} MB。","composer.problem.imageUnreadable":"无法读取剪贴板中的图片。","composer.problem.tooBig":"“{{name}}”大小为 {{size}} MB，上限为 {{max}} MB。","composer.problem.tooManyFiles_other":"每条消息最多 {{count}} 个文件。","composer.problem.tooManyImages_other":"每条消息最多 {{count}} 张图片。","composer.problem.unreadable":"无法读取“{{name}}”。","composer.resizeTitle":"拖动以调整输入框大小","composer.send":"发送","composer.sendTitle":"发送（Enter）","composer.stop":"停止","composer.stopTitle":"中断 CLI 正在进行的操作（Esc）","console.collapse":"折叠。进程会继续运行：要结束进程，请使用各终端上的 ×","console.name":"控制台","console.noShell":"未找到可打开的系统控制台。","console.openAnother":"在 {{cwd}} 中再打开一个 {{shell}}","console.openAnyIn":"在 {{cwd}} 中打开控制台","console.openIn":"在 {{cwd}} 中打开 {{shell}}","console.tab.close":"关闭此终端并结束其进程","console.tab.exited":"已退出，退出代码 {{code}}","console.tab.label":"终端 {{number}}","console.tab.title":"{{shell}} {{number}}，位于 {{cwd}}","continue.menuLabel":"继续使用","controls.effort.high":"高","controls.effort.inUse":"当前推理强度：{{effort}}。更改会向 CLI 标签页发送 {{command}}","controls.effort.inUseSaved":"当前推理强度：{{effort}}。更改会向 CLI 标签页发送 {{command}}，CLI 还会将其保存为之后标签页的默认值","controls.effort.low":"低","controls.effort.max":"最高","controls.effort.medium":"中","controls.effort.minimal":"最低","controls.effort.noData":"推理强度：无数据。并非所有模型都有强度级别——使用 haiku 时，/effort 不会留下任何记录","controls.effort.off":"关闭","controls.effort.placeholder":"推理强度：无数据","controls.effort.provisional":"配置中的推理强度：{{effort}}。尚无回复确认该值","controls.effort.xhigh":"超高","controls.model.default":"默认","controls.model.inUse":"当前模型：{{model}}。更改会向 CLI 标签页发送 /model","controls.model.inUseSaved":"当前模型：{{model}}。更改会向 CLI 标签页发送 /model，CLI 还会将其保存为之后标签页的默认值","controls.model.noData":"模型：此会话中还没有任何回复","controls.model.placeholder":"模型：无数据","controls.model.provisional":"配置中的模型：{{model}}。尚无回复确认该值","conversation.answerUnconfirmed":"CLI 未确认此回答。请重试，或在 CLI 标签页中回答。","diff.binary":"二进制文件：没有可显示的差异。","diff.noChanges":"没有更改。","diff.truncated":"差异内容过大，已被截断。完整文件在此面板之外查看会更方便。","docs.backToList":"显示列表","docs.edit.adopt":"把我的修改移到新版本","docs.edit.button":"编辑","docs.edit.cancel":"取消","docs.edit.closeConfirm":"此文件有未保存的修改。放弃修改并关闭吗？","docs.edit.conflict":"你编辑期间，磁盘上的文件被修改了。你的修改没有保存。","docs.edit.discard":"放弃","docs.edit.discardAndClose":"放弃并关闭","docs.edit.discardConfirm":"放弃你的修改吗？","docs.edit.discardMine":"放弃我的修改","docs.edit.editing":"正在编辑 {{name}}","docs.edit.gone":"文件已不在磁盘上，或者新版本无法在这里编辑。你的修改没有保存：如有需要，请先复制。","docs.edit.keepEditing":"继续编辑","docs.edit.lost":"保存时连接中断。请再保存一次以确认。","docs.edit.noChanges":"没有修改","docs.edit.pending":"你尚未保存的修改。请把它们移到文件里再保存。","docs.edit.pendingDone":"完成","docs.edit.save":"保存","docs.edit.saveTitle":"保存 (Ctrl+S)","docs.edit.saved":"已保存","docs.edit.saving":"正在保存…","docs.edit.title":"在这里编辑此文件","docs.edit.tooLarge":"文件太大，无法在这里编辑","docs.edit.unsafe":"不是纯 UTF-8 文本：从这里保存可能会损坏它","docs.edit.unsaved":"有未保存的修改","docs.failed":"无法读取文档。请用 ⟳ 重试。","docs.mode.formatted":"格式化","docs.mode.label":"此 Markdown 的显示方式","docs.mode.source":"源码","docs.reload":"重新读取文档","docs.reloadFailed":"无法重新读取：这是最后收到的版本。","docs.search.placeholder":"在此文档中搜索","docs.tab.close":"关闭此文档","files.allHidden":"其中的内容均已隐藏","files.empty":"空文件夹","files.hidden.hide":"重新隐藏被 .gitignore 和内置列表排除的内容","files.hidden.show":"同时显示被 .gitignore 和内置列表排除的内容","files.hiddenCount_other":"已隐藏 {{count}} 项","files.hiddenTitle":"已隐藏：.git、node_modules、dist、bin、obj，以及 .gitignore 中指定的内容","files.insertFolderPath":"把此文件夹的路径放进消息","files.insertPath":"把 {{name}} 的路径放进消息","files.loading":"正在加载…","files.menu.copyAbsolute":"复制绝对路径","files.menu.copyRelative":"复制相对路径","files.menu.insertMention":"插入为 @路径","files.menu.openWithSystem":"用默认应用打开","files.moreEntries":"还有更多未显示的条目","files.pathInserted":"已放进消息","files.preview.binary":"二进制文件：无法预览。","files.preview.insertPath":"把路径放进消息","files.preview.truncated":"文件过大，已被截断。用默认应用打开可查看完整内容。","files.readDirFailed":"无法读取目录。","files.readingDir":"正在读取目录…","files.readingFile":"正在读取文件…","files.refresh":"重新加载文件树","files.reveal":"在系统文件管理器中打开 {{name}}","files.revealFolder":"在系统文件管理器中打开此文件夹","files.row.alwaysHidden":"始终隐藏：.git、node_modules、dist、bin、obj","files.row.ignored":"已被 .gitignore 隐藏","files.search.clear":"清除（Esc）","files.search.more":"还有更多未显示的结果","files.search.moreTitle":"缩小搜索范围以查看全部结果","files.search.none":"没有与该名称匹配的文件。","files.search.placeholder":"按名称搜索文件…","files.search.prompt":"输入内容开始搜索。","files.search.searching":"正在搜索…","format.bytes.b":"{{value}} B","format.bytes.gb":"{{value}} GB","format.bytes.kb":"{{value}} KB","format.bytes.mb":"{{value}} MB","format.duration.minutes":"{{value}} 分钟","format.duration.minutesSeconds":"{{minutes}} 分 {{seconds}} 秒","format.duration.ms":"{{value}} 毫秒","format.duration.seconds":"{{value}} 秒","format.duration.underSecond":"不到 1 秒","format.timeLeft.daysHours":"{{days}}天{{hours}}小时","format.timeLeft.hoursMinutes":"{{hours}}小时{{minutes}}分","format.timeLeft.minutes":"{{minutes}}分钟","format.timeLeft.underMinute":"不到1分钟","git.aheadBehindTitle":"相对上游分支领先和落后的提交数","git.backToChanges":"更改","git.clean":"工作区是干净的。","git.detached":"HEAD 已分离","git.detachedAt":"HEAD 已分离 @ {{head}}","git.group.conflict":"冲突","git.group.conflictHint":"需要先解决这些冲突才能继续","git.group.staged":"已暂存","git.group.stagedHint":"已通过 git add 添加","git.group.unstaged":"未暂存","git.group.unstagedHint":"在工作区中已修改","git.group.untracked":"未跟踪","git.group.untrackedHint":"git 尚未跟踪的新文件","git.kind.added":"已添加","git.kind.conflict":"冲突","git.kind.copied":"已复制","git.kind.deleted":"已删除","git.kind.modified":"已修改","git.kind.renamed":"已重命名","git.kind.typeChanged":"类型已更改","git.kind.untracked":"未跟踪","git.newFolderTitle":"{{path}} — 新文件夹；其内容可在“文件”中查看","git.readingDiff":"正在读取差异…","git.refresh":"立即刷新状态","git.stagedTag":"已暂存","git.truncated":"还有更多未显示的更改。这通常意味着 <code>.gitignore</code> 中缺少某条规则。","git.unknownState":"尚未获取到仓库状态。","git.upstreamTitle":"上游分支：{{upstream}}","git.worktrees.detached":"已分离","header.locale.auto":"自动（浏览器：{{name}}）","header.locale.title":"语言：{{name}}","header.locale.titleAuto":"语言：{{name}}（自动，跟随浏览器）","memory.action.appendBlock":"将在末尾追加区块","memory.action.appendLines":"将在末尾追加几行","memory.action.copy":"将复制","memory.action.create":"将创建","memory.action.replaceBlock":"将替换区块","memory.back":"← 记忆","memory.error.connectionLost":"收到响应前连接已中断。重新连接后，状态会显示哪些内容已写入。","memory.form.copyFromMain":"从主 worktree 复制笔记","memory.form.existingNotes":"已有笔记","memory.form.files":"指令文件","memory.form.importNative_other":"从 Claude Code 的记忆中导入 {{count}} 条笔记","memory.form.noFiles":"请至少选择一个指令文件","memory.form.planning":"正在计算…","memory.form.preview":"预览更改","memory.git.alreadyIgnored":"此仓库已忽略 <code>.agents/memory/</code>。要将其纳入版本控制，需要手动从 <code>.gitignore</code> 中删除这条规则。","memory.git.blocked":"由于 git 返回了错误，只能在不修改 .gitignore 的情况下安装","memory.git.dontTouch":"不修改 <code>.gitignore</code>","memory.git.errorHint":"git 返回了错误","memory.git.errorWarning":"git 返回了错误，因此无法判断记忆是否被忽略。可以在不修改 <code>.gitignore</code> 的情况下安装。","memory.git.ignore":"忽略记忆","memory.git.ignoreHint":"推荐","memory.git.version":"纳入版本控制","memory.git.versionHint":"适用于私有仓库","memory.global.copy":"复制片段","memory.global.intro":"适用于你所有项目的内容放在 <code>~/.agents/global.md</code> 中。本应用不会写入该文件：为各个 CLI 添加对应的片段后，它们就会读取该文件。","memory.global.title":"全局记忆","memory.index":"索引","memory.intro.what":"共享记忆会保存代理对此项目的了解——决策、约束、已经踩过的坑——供下一个会话使用。","memory.intro.where":"它位于 <code>.agents/memory/</code>：每条笔记一个文件，另有一个索引文件 <code>MEMORY.md</code>。四个 CLI 通过各自指令文件中的标记区块读取它。在你确认更改之前，不会写入任何内容。","memory.list.empty":"还没有笔记。代理学到对其他会话有用的内容时，会将其保存在这里。","memory.list.notes":"笔记","memory.loading":"正在读取记忆…","memory.native.import_other":"导入 {{count}} 条笔记","memory.native.importing":"正在导入…","memory.native.pending_other":"Claude Code 自身的记忆中有 {{count}} 条笔记不在这里。","memory.note.loading":"正在读取笔记…","memory.note.truncated":"笔记过大，已被截断。","memory.plan.back":"返回","memory.plan.changes":"更改","memory.plan.copiedFrom":"从 {{path}} 复制","memory.plan.install":"安装","memory.plan.nothing":"没有需要更改的内容：桥接已是最新。","memory.plan.update":"更新","memory.plan.writing":"正在写入…","memory.problem.brokenBlock":"区块标记格式错误","memory.problem.brokenBlockWarning":"<code>{{file}}</code> 中的记忆区块标记格式错误：有标记不成对，或区块重复。在你手动修复之前，本应用不会修改它。","memory.problem.encoding":"不是 UTF-8 编码","memory.problem.encodingWarning":"<code>{{file}}</code> 不是 UTF-8 编码（看起来是 UTF-16，即 Windows PowerShell 5.1 中 <code>></code> 写出的编码）。请将其另存为 UTF-8：在此之前本应用不会修改它。","memory.problem.outside":"这是一个指向项目外部的链接","memory.problem.outsideWarning":"<code>{{file}}</code> 是一个指向项目外部的链接：本应用不会读取或写入它。","memory.reach.adjust":"调整","memory.reach.adjustTitle":"重新选择桥接使用的指令文件","memory.reach.doesNotReach":"：无法读取记忆，{{via}}","memory.reach.reaches":"：通过 {{via}} 读取记忆","memory.reach.title":"{{label}}：{{via}}","memory.result.imported_other":"已导入 {{count}} 条笔记。","memory.result.installed_other":"完成：已更改 {{count}} 个文件。","memory.result.nothingChanged":"没有需要更改的内容：桥接已是最新。","memory.result.nothingImported":"没有可导入的新笔记。","memory.result.skipped_other":"以下文件已存在且内容不同，因此未覆盖：{{files}}。","memory.result.withSkipped":"{{result}}{{skipped}}","memory.update.button":"更新桥接","memory.update.missing":"{{files}} 中缺少区块。","memory.update.outdatedAndMissing_other":"{{outdated}} 中的区块已过时；{{missing}} 中缺少区块。","memory.update.outdated_other":"{{files}} 中的区块已过时。","meter.compact":"压缩","meter.compactBusy":"请等代理完成后再压缩。","meter.compactNoCli":"请先打开 CLI 再压缩。","meter.compactTitle":"向 CLI 发送 {{command}}：它会总结对话以释放上下文。","meter.configure":"配置","meter.label":"上下文","meter.lastResponseTitle":"模型的最后一次回复","meter.modelWithOrigin":"{{model}} — {{origin}}","meter.noTokens":"此 CLI 不提供 token 用量","meter.noTokensTitle":"此 CLI 不提供每次回复使用的 token 数，因此无从统计。","meter.output":"输出 {{tokens}}","meter.responses_other":"{{count}} 次回复","meter.sessionTitle":"整个会话的累计用量","meter.sessionTotals_other":"会话：输出 {{output}} · 缓存 {{cache}} · {{count}} 次回复","meter.unknownModel":"未识别的模型：仅显示 token 数，不显示窗口大小","meter.unknownModelShort":"未识别的模型：窗口大小未知","meter.unmeasured":"未测量","meter.windowPercent":"占窗口的 {{percent}}%","mode.acceptEdits.hint":"接受文件编辑而不询问","mode.acceptEdits.label":"接受编辑","mode.auto.hint":"CLI 自行决定使用哪些工具，无需询问","mode.auto.label":"自动","mode.default.hint":"每次使用未获允许的工具前都会询问","mode.default.label":"手动","mode.plan.hint":"调研并提出计划，在你批准之前不做任何改动","mode.plan.label":"计划","narrow.keys.ctrlO":"Ctrl+O（在 Claude Code 中展开被截断的内容）","narrow.keys.ctrlX":"Ctrl+X","narrow.keys.down":"下箭头","narrow.keys.esc":"Escape","narrow.keys.interrupt":"Ctrl+C：中断","narrow.keys.label":"终端按键","narrow.keys.left":"左箭头","narrow.keys.right":"右箭头","narrow.keys.shiftTab":"Shift+Tab（在 Claude Code 中切换权限模式）","narrow.keys.tab":"Tab","narrow.keys.up":"上箭头","narrow.menu.chimePage":"此网页","narrow.menu.chimeSystem":"系统","narrow.menu.cli":"CLI","narrow.menu.connection":"连接","narrow.menu.folder":"文件夹","narrow.menu.language":"语言","narrow.menu.notifications":"系统通知","narrow.menu.phoneAppDisconnect":"断开连接","narrow.menu.phoneAppSettings":"设置","narrow.menu.shortcuts":"键盘快捷键","narrow.menu.sound":"提示音","narrow.menu.theme":"主题","narrow.more":"更多","narrow.projects":"项目","narrow.tabs.close":"关闭标签页","narrow.tabs.new":"新标签页","narrow.tabs.none":"没有打开的标签页。","narrow.tabs.open":"标签页","narrow.tabs.rename":"重命名","narrow.view.chat":"聊天","notes.attach":"从文件中附加图片","notes.closeConfirm":"关闭此笔记会将其连同图片一起删除。","notes.closeNote":"关闭笔记。笔记会连同其图片一起删除","notes.collapse":"折叠。笔记不会丢失：只有各标签页上的 × 才会关闭笔记","notes.empty":"没有笔记。点击 <b>+</b> 新建一条；笔记用于随手记下想法，而不必离开手头的工作。","notes.expand":"展开笔记","notes.imageAlt":"笔记图片","notes.imageFallbackName":"图片","notes.imageOnly":"图片","notes.imageTooBig":"“{{name}}”大小为 {{size}} MB，上限为 {{max}} MB。","notes.imageUnavailable":"图片不可用","notes.lightboxClose":"点击关闭","notes.name":"笔记","notes.new":"新建笔记","notes.placeholder":"记下一个想法。可以将图片粘贴或拖放到这里。","notes.readFailed":"无法读取图片。","notes.removeImage":"移除图片","notes.resize":"拖动以调整高度","notes.thumbMissing":"缺失","notes.tooManyImages_other":"每条笔记最多 {{count}} 张图片。","notes.untitled":"笔记","notify.attention":"“{{tab}}”正在等你","notify.done":"“{{tab}}”已完成","panel.cliUnseen":"CLI 有新的输出","panel.hide":"隐藏面板（Alt+P）","panel.restoreWidth":"恢复此栏的宽度","panel.tab.cli":"CLI","panel.tab.files":"文件","panel.tab.git":"更改","panel.tab.memory":"记忆","panel.tab.plans":"计划","panel.widen":"加宽此栏 — CLI 界面需要足够的宽度来绘制差异和表格","picker.create":"创建","picker.createHere":"在此创建文件夹","picker.empty":"此处没有子文件夹。","picker.goTo":"转到 {{root}}","picker.loading":"正在读取磁盘…","picker.newFolderName":"文件夹名称","picker.truncated":"子文件夹数量超出了列表的容量。请进入其中一个以缩小范围。","picker.up":"上级文件夹","plan.label":"套餐","plan.noData":"暂无数据","plan.noDataTitle":"status line 已配置，但尚未提供你的套餐用量限制：它们会随每个会话的第一次回复到来。CLI 只在订阅套餐中提供这些信息。","plan.noReset":"无重置时间","plan.observed":"最后更新：{{when}}","plan.resetsIn":"{{time}}后重置（{{at}}）","plan.setup.disabled":"此 CLI 仅通过其 status line 提供套餐用量限制，而本应用的 status line 已被禁用。点击“配置”查看设置方法。","plan.setup.missing":"此 CLI 仅通过其 status line 提供套餐用量限制（5 小时窗口和每周），但 status line 尚未配置。点击“配置”查看设置方法。","plan.setup.otherCommand":"此 CLI 仅通过其 status line 提供套餐用量限制，而你已配置了另一个 status line。点击“配置”查看设置方法。","plan.setup.unreadable":"此 CLI 仅通过其 status line 提供套餐用量限制，但无法读取它的 settings.json。点击“配置”查看设置方法。","plan.used":"已用 {{percent}}","plan.window.day":"日","plan.window.days":"{{value}}天","plan.window.fiveHours":"5小时","plan.window.hours":"{{value}}小时","plan.window.month":"月","plan.window.quota":"配额","plan.window.week":"周","plans.empty":"此对话还没有写入任何文档。计划模式生成的计划会显示在这里，代理保存在项目或其临时文件夹中的 <code>.md</code> 文件也会显示在这里。","plans.loading":"正在读取计划…","plans.missing":"已不存在","plans.missingTitle":"该文件已不在磁盘上","plans.truncated":"计划过大，已被截断。","remote.address":"本机地址","remote.copied":"已复制","remote.copy":"复制","remote.device.connected":"当前已连接","remote.device.lastSeen":"上次连接：{{when}}","remote.device.never":"从未连接","remote.device.paired":"配对时间：{{when}}","remote.device.rename":"重命名","remote.device.revoke":"撤销","remote.device.revokeConfirm":"再点一次以撤销","remote.devices":"已配对的设备","remote.devices.empty":"暂无。","remote.intro":"从同一网络中的另一台电脑或你的手机使用 Agent Workbench。不会向网络开放任何东西：连接通过 SSH 隧道。","remote.onlyOnHost":"仅限运行 Agent Workbench 的那台电脑：它会用那台电脑上的应用打开。","remote.pair.after":"之后，另一台电脑只需打开 {{url}}。","remote.pair.cancel":"取消","remote.pair.expires":"只能使用一次，并在 {{time}} 后过期。","remote.pair.needsActive":"远程访问开启并运行后即可配对。","remote.pair.open":"在隧道运行的状态下，用另一台电脑的浏览器打开这个地址：","remote.pair.start":"配对设备","remote.phone.authorize.admin":"1. 授权手机的密钥：在本机以管理员身份打开 PowerShell，粘贴这一行。","remote.phone.authorize.powershell":"1. 授权手机的密钥：在本机的 PowerShell 中粘贴这一行。","remote.phone.authorize.terminal":"1. 授权手机的密钥：在本机的终端中粘贴这一行。","remote.phone.authorizeOnce":"这把密钥只能打开通往 Agent Workbench 的隧道：不能开终端，也不能执行命令。如果已经粘贴过，就不必再粘贴。","remote.phone.hint":"使用 Android 应用？它只需要第 1 步：它会打开隧道并自动配对。","remote.phone.qrLabel":"用手机扫描的代码","remote.phone.scan":"2. 在应用中点按“扫描代码”，把摄像头对准这里：","remote.phone.secret":"不要把这个代码或它的照片给任何人：里面有手机的密钥。","remote.phone.start":"配对手机","remote.phone.title":"手机","remote.port":"端口","remote.portInvalid":"{{min}} 到 {{max}} 之间的数字。","remote.portSave":"保存","remote.restartHint":"开启或更改端口，要重启 Agent Workbench 后才生效。重启会关闭已打开的 CLI：标签页会以休眠状态恢复。","remote.ssh.linux":"在终端中（Ubuntu 或 Debian；其他发行版请安装其 OpenSSH 服务器）：","remote.ssh.macos":"系统设置 → 通用 → 共享 → 打开“远程登录”。","remote.ssh.windows":"以管理员身份打开 PowerShell，粘贴以下内容。第一行会下载并安装服务器，需要几分钟，期间会显示“Running”。等提示符重新出现后再继续。","remote.state.active":"已开启，端口 {{port}}","remote.state.off":"已关闭","remote.state.portBusy":"端口 {{port}} 已被占用，因此本次运行中远程访问无法工作。请关闭另一个程序（可能是另一个 Agent Workbench）后重启，或改用其他端口。","remote.state.restartNeeded":"已开启，但要重启 Agent Workbench 后才生效","remote.step.host":"1. 在这台电脑上，只需一次：开启 SSH","remote.step.hostHint":"这是系统设置，需要管理员权限，所以应用不会自动完成。已展开这台电脑的系统：","remote.step.pair":"3. 配对，每台设备一次","remote.step.tunnel":"2. 在另一台电脑上，每次使用时","remote.step.tunnelHint":"把这条命令粘贴到它的终端并保持打开。它会要求输入你在这台电脑上的用户密码。","remote.title":"远程访问","remote.trouble":"连不上？","remote.trouble.network":"在 Windows 上，检查这台电脑的 Wi‑Fi 网络是否设为“专用”。","remote.turnOff":"关闭","remote.turnOffHint":"关闭会立即生效：已配对的设备会断开连接，但仍保持配对。","remote.turnOn":"开启远程访问","remote.userHint":"如果 SSH 不接受“{{user}}”：使用 Microsoft 或工作账户时，请尝试用户文件夹的名称（C:\\Users\\<名称>）和账户密码，而不是 PIN。","remote.vpnHint":"会阻止本地网络的公司 VPN 在连接期间会切断连接。应用对此无能为力。","rewind.filesHint":"手动或通过控制台命令所做的更改不会被撤销。","rewind.filesSection":"代理此后修改过的文件","rewind.intro":"这条消息及其之后的所有内容都会被撤销。消息会放回输入框，方便你修改。","rewind.running":"正在回退…","rewind.title":"回到这条消息之前","rewind.undo":"撤销","rewind.undoAll":"撤销对话和代码","rewind.undoConversation":"仅对话","search.found":"在 {{sessions}}中找到 {{hits}}","search.hits_other":"{{count}} 处匹配","search.mode.conversations":"在对话中","search.mode.conversationsTitle":"搜索备份中保存的对话文本，不区分大小写和重音符号","search.mode.titles":"在标题中","search.off":"备份已关闭：搜索仅覆盖它开启期间保存的内容。","search.placeholder.conversations":"搜索对话内容（Enter）","search.placeholder.titles":"筛选项目和会话","search.role.assistant":"回复","search.role.title":"标题","search.role.user":"请求","search.sessions_other":"{{count}} 个会话","search.status.done":"{{found}}。","search.status.none":"没有结果","search.status.noneIn":"在 {{sessions}}中没有找到结果。","search.status.progressFound_other":"正在搜索… {{scanned}}/{{count}} 个会话，目前{{found}}。","search.status.progress_other":"正在搜索… {{scanned}}/{{count}} 个会话。","search.status.searching":"正在搜索…","search.status.truncatedResults":"{{found}}：这些只是最前面的结果，请细化搜索以查看其余结果。","search.status.truncatedTime":"{{found}}：搜索在 {{seconds}} 秒后停止，还有 {{left}}未检查。","search.tooShort":"请至少输入 {{min}} 个字符，然后按 Enter。","searchHook.connectionLost":"与服务器的连接已断开：请重新搜索。","server.agentUnknown":"此服务器不支持启动该 CLI。","server.answerFreeTextMulti":"多选题的自定义回答请在 CLI 标签页中填写。","server.answerInterrupted":"回答未能完整发送：发送过程被中断。","server.answerInvalid":"回答与问题不匹配。","server.answerMenuChanged":"问题已与读取时不同：请在 CLI 标签页中回答。","server.answerNoFreeText":"此问题不接受文字回答：请选择其中一个选项。","server.answerNotPending":"该问题已不再等待回答。","server.answerSendFailed":"无法发送回答：请在 CLI 标签页中回答。","server.answersUnsupported":"此 CLI 不接受从对话中发送的回答。请在 CLI 标签页中回答。","server.archiveOpenTab":"有打开标签页的会话不会被归档。请先关闭标签页。","server.attachmentEmpty":"收到的“{{name}}”为空。","server.attachmentExecutable":"不能附加可执行文件：“{{name}}”。","server.attachmentSaveFailed":"无法保存附加的文件。","server.attachmentTooLarge":"“{{name}}”大小为 {{size}} MB，上限为 {{max}} MB。","server.badMessage":"协议无法识别此消息。","server.cliFolderClosed":"这在某个 CLI 自己的文件夹里：应用不会打开它。","server.cliMissing":"在 PATH 中找不到“{{command}}”命令。Agent Workbench 使用你已安装的 CLI：它不包含也不会下载 CLI。请从 {{url}} 安装后重新启动。","server.cliNotFound":"CLI 未安装，或在 PATH 中找不到。","server.cliNotInstalled":"{{label}} 未安装，或在 PATH 中找不到。","server.cliOpenFailed":"无法打开该标签页的 CLI。","server.continueFailed":"无法准备接续内容。","server.continueHistoryMissing":"找不到该对话的历史记录。","server.continueNoFolder":"该对话没有记录它运行时所在的文件夹。","server.continueNotInHistory":"该对话不在历史记录中：如果它刚刚开始，请几秒后重试。","server.continueReadFailed":"无法读取该对话。","server.continueSameCli":"该对话本就属于该 CLI：要继续该对话，请从侧边栏打开。","server.continueTabFailed":"无法打开用于接续的标签页。","server.continueTranscriptFailed":"无法保存接续所用的对话记录。","server.conversationNotFollowed":"已不再跟踪该对话。","server.cwdMissing":"目录不存在：{{cwd}}","server.cwdNotDir":"不是目录：{{cwd}}","server.diffBinaryUntracked":"未跟踪的二进制文件。","server.diffNewEmpty":"新建的空文件。","server.diffNoStaged":"此文件没有已暂存的更改。","server.diffNoUnstaged":"此文件没有未暂存的更改。","server.diffReadFailed":"无法读取差异。","server.dirReadFailed":"无法读取目录。","server.dirSearchFailed":"无法搜索目录。","server.fileReadFailed":"无法读取文件。","server.fileSaveBlocked":"无法保存文件：它是只读的，或者被其他程序打开了。","server.fileSaveFailed":"无法保存文件。","server.fileSaveTooLarge":"文件太大，无法从这里保存：上限是 {{max}}。","server.filesPerMessage":"每条消息最多可附加 {{max}} 个文件。","server.forceSendFailed":"无法强制发送：消息仍在排队。","server.forceSendNoCli":"此标签页的 CLI 未打开。","server.forceSendNothing":"没有排队的消息：消息已经送达代理。","server.forceSendUnsupported":"此标签页的 CLI 不支持从应用中强制发送。","server.forceSendWaiting":"CLI 正在等待你的回答：请先回答再强制发送。","server.gitCommandFailed":"git {{command}} 失败。","server.gitMissing":"在 PATH 中找不到 git。“更改”面板需要安装 git；应用的其余部分照常工作。","server.gitNotFound":"在 PATH 中找不到 git。","server.gitNotRepo":"此文件夹不在 git 仓库中。","server.gitRunFailed":"无法运行 git 来读取仓库状态。","server.gitStatusUnknown":"尚未获取到仓库状态。","server.gitUnexpected":"git {{command}} 返回了意外的结果。","server.handoffEmpty":"该对话没有可继续的消息。","server.handoffNoTranscript":"该对话没有可继续的消息：那个 CLI 没有留下可读的对话记录。","server.imageEmpty":"收到的图片为空。","server.imageTooLarge":"图片大小为 {{size}} MB，上限为 {{max}} MB。","server.imageTypeUnsupported":"不支持的图片类型：{{type}}","server.imageUnknownFormat":"内容不是已知格式的图片。","server.imagesPerMessage":"每条消息最多可附加 {{max}} 张图片。","server.imagesUnsupported":"此 CLI 不接受从输入框发送的图片。","server.memoryAppeared":"安装过程中出现了 {{file}}。请重新检查更改。","server.memoryBrokenBlock":"{{file}} 中的记忆区块标记格式错误（有标记不成对，或区块重复）。请手动修复：在此之前本应用不会修改该文件。","server.memoryChooseFile":"请至少选择一个指令文件。","server.memoryGitFailed":"无法查询 git（{{detail}}）。没有这些信息，就无法判断 .gitignore 是否需要修改。","server.memoryHardLinks":"{{file}} 存在硬链接：本应用不会修改它，因为写入会破坏链接。请手动添加区块。","server.memoryLinkOutside":"{{path}} 指向项目外部（链接或目录联接）：本应用不会在那里写入。","server.memoryNotAFile":"{{label}} 已存在，但不是文件。","server.memoryNotInstalled":"请先安装桥接：缺少 .agents/memory 文件夹。","server.memoryNotUtf8":"{{file}} 不是 UTF-8 编码（看起来是 UTF-16，即 Windows PowerShell 5.1 中 `>` 写出的编码）。请将其另存为 UTF-8：在此之前本应用不会修改它。","server.memoryNoteClaude":"将这一行添加到末尾。Claude Code 会在启动时导入该文件。","server.memoryNoteGone":"该笔记已不存在。","server.memoryNoteHardLink":"硬链接。`~/{{path}}` 必须已经存在，而 CLI 的文件必须不存在：如果它已存在，请将其内容移到 `global.md` 中，然后删除它。如果你的编辑器通过替换文件来保存，链接就会断开：这种情况下请改为复制内容。","server.memoryNoteHardLinkCmd":"硬链接（在 cmd 中）。`~/{{path}}` 必须已经存在，而 CLI 的文件必须不存在：如果它已存在，请将其内容移到 `global.md` 中，然后删除它。如果你的编辑器通过替换文件来保存，链接就会断开：这种情况下请改为复制内容。","server.memoryNoteName":"该名称不是记忆笔记。","server.memoryNoteOpenCode":"放在根对象内。需使用绝对路径：OpenCode 不会展开此键中的 `~`（未经验证）。","server.memorySameFile":"{{other}} 和 {{file}} 是同一个文件（链接）。请只选择其中一个。","server.memoryViaEncoding":"{{file}} 不是 UTF-8 编码","server.memoryViaFallback":"CLAUDE.md（备用）","server.memoryViaFile":"{{file}}","server.memoryViaNoBlock":"{{file}} 中缺少区块","server.memoryViaNoBlockEither":"AGENTS.md 和 CLAUDE.md 中都缺少区块","server.memoryViaNoFolder":"缺少 .agents/memory 文件夹","server.memoryViaNoIndex":"缺少 .agents/memory/MEMORY.md","server.memoryViaOutside":"{{file}} 指向项目外部","server.modePendingConfirmation":"CLI 中有一个待处理的确认：现在切换模式会批准它。请在 CLI 标签页中回应。","server.modeUnreachable":"无法从当前模式切换到该模式。请在 CLI 标签页中用 {{key}} 切换。","server.modesUnsupported":"此 CLI 没有可在这里切换的权限模式。","server.noteCliNotStarted":"该标签页的 CLI 未能启动；笔记未发送。","server.noteEmpty":"笔记为空。","server.noteExists":"该笔记已存在。","server.noteGone":"笔记已不存在。","server.noteIdInvalid":"笔记 ID 无效。","server.noteImageFailed":"无法附加笔记中的一张图片。","server.noteImagesMax":"每条笔记最多 {{max}} 张图片。","server.noteImagesUnsupported":"此 CLI 不接受图片；笔记未发送。","server.noteInterrupted":"笔记未能完整发送：发送过程被中断。","server.noteNoAgent":"该标签页没有可接收笔记的代理。","server.noteNoReadySignal":"此 CLI 不会告知何时就绪；笔记未发送。","server.noteSaveFailed":"无法保存笔记。","server.noteTooLong":"一条笔记最多 {{max}} 个字符。","server.notesMax":"最多只能打开 {{max}} 条笔记。请先关闭一条。","server.openToolSubmit":"{{label}} 有一个尚未返回结果的工具调用：它可能正在请求批准。请在 CLI 标签页中回应。","server.operationFailed":"无法完成操作：{{detail}}","server.pasteImageFailed":"无法保存粘贴的图片。","server.pathMissing":"路径不存在。","server.pathNotRelative":"只接受相对于标签页目录的路径。","server.pathNullByte":"路径中包含空字节。","server.pathOpenFailed":"无法打开该路径。","server.pathOutside":"路径超出了标签页的目录。","server.pendingSubmitAnswer":"{{label}} 正在等待回答：消息末尾的 Enter 会被当作回答。请在 CLI 标签页中回答。","server.pendingSubmitPermission":"{{label}} 正在等待你授权使用某个工具：消息末尾的 Enter 会批准它。请在 CLI 标签页中回应。","server.pickerCliFolder":"该文件夹属于 CLI，无法从这里打开。","server.pickerClosed":"该文件夹选择器已关闭。","server.pickerCreateFailed":"无法在该位置创建文件夹。","server.pickerFolderExists":"已存在同名文件夹。","server.pickerListFailed":"无法列出该文件夹的内容。","server.pickerNameChars":"名称中包含不可用的字符。","server.pickerNameInvalid":"文件夹名称无效。","server.pickerNoProjectsHere":"不能在那里创建项目：那是 CLI 的文件夹。","server.pickerNotListed":"该文件夹不在当前列表中。","server.pickerRootMissing":"该根目录不存在。","server.pickerTooMany":"打开的文件夹选择器过多。","server.planReadFailed":"无法读取计划。","server.queueEditBusyEditor":"CLI 的输入框中有文字：请在 CLI 标签页中编辑排队的消息。","server.queueEditDelivered":"代理刚刚收到了它：它已不在排队中。","server.queueEditFailed":"无法将其移出队列：它仍在排队中。","server.queueEditForced":"你已经强制发送：CLI 正在把它交给代理。","server.queueEditNoCli":"此标签页的 CLI 未打开。","server.queueEditNotCleared":"排队的消息已回到 CLI 的输入框，但应用无法清空它：你的消息在 CLI 标签页里。","server.queueEditNotOnScreen":"CLI 没有显示排队的消息：它可能刚把消息交给了代理。","server.queueEditNothing":"没有排队的消息：消息已经送达代理。","server.queueEditUnsupported":"此标签页的 CLI 不支持从应用中编辑排队的消息。","server.queueEditWaiting":"CLI 正在等待你的回答：请先回答再编辑排队的消息。","server.raw":"{{text}}","server.relaunchCloseFailed":"无法关闭该标签页的 CLI 以重新启动。","server.remoteDeviceGone":"该设备已不再配对。","server.remoteFailed":"无法更改远程访问设置。","server.remoteHostOnly":"远程访问只能在运行 Agent Workbench 的那台电脑上管理。","server.remoteNotActive":"远程访问尚未开启并运行。请开启后重启 Agent Workbench。","server.remoteOpensOnHost":"该操作会在运行 Agent Workbench 的那台电脑上打开窗口，因此无法从远程设备使用。","server.remotePortInvalid":"端口必须是 {{min}} 到 {{max}} 之间的数字。","server.remoteTooManyDevices":"已有 {{max}} 台设备配对。请先撤销其中一台。","server.rewindBusy":"CLI 正在工作：请先停止它再回退。","server.rewindFailed":"无法从这里回退，也没有撤销任何内容。请在 CLI 标签页中按 Esc Esc 操作。","server.rewindNoCli":"此标签页的 CLI 未打开：请先打开它再回退。","server.rewindUnknownMessage":"这条消息已不在对话中。","server.rewindUnsupported":"此标签页的 CLI 不支持从应用回退。","server.searchFailed":"无法搜索备份。","server.settingsFailed":"无法保存设置。","server.settingsHostOnly":"这些设置只能在运行 Agent Workbench 的电脑上更改。","server.settingsShellMissing":"该控制台已不再安装。","server.shellNotFound":"未找到可打开的系统控制台。","server.submitInterrupted":"消息未能完整发送：发送过程被中断。","server.submitStartupDialog":"{{label}} 在接收消息前正在屏幕上提问，例如是否信任此文件夹。请在 CLI 标签页中回答后再发送：消息已放回输入框。","server.submitStoppedTool":"消息未能完整发送：输入过程中，{{label}} 发起了一个工具调用，可能正在请求批准。请查看 CLI 标签页。","server.submitStoppedToolNoLabel":"消息未能完整发送：输入过程中，CLI 发起了一个工具调用，可能正在请求批准。请查看 CLI 标签页。","server.submitStoppedWaiting":"消息未能完整发送：输入过程中，{{label}} 开始等待回答。请先回答，再发送新消息。","server.submitStoppedWaitingNoLabel":"消息未能完整发送：输入过程中，CLI 开始等待回答。请先回答，再发送新消息。","server.tabClosedWhileOpening":"标签页在打开过程中被关闭。","server.tabDirGone":"标签页的目录已不存在。","server.tabOpenFailed":"无法打开标签页。","server.terminalAsleep":"此标签页没有打开 CLI。打开 CLI 后才能向代理发送消息。","server.terminalGone":"终端已不存在。","server.terminalOpenFailed":"无法打开终端。","server.tooManyTabs":"最多只能同时打开 {{max}} 个标签页。","server.vaultBusyMeasuring":"备份正在统计中。请在完成后重试。","server.vaultBusyMoving":"备份正在移动到另一个文件夹。请在完成后重试。","server.vaultBusyWriting":"备份正在复制中。请在完成后重试。","server.vaultCannotWrite":"无法写入该文件夹。","server.vaultCurrentInsideTarget":"当前备份不能位于新文件夹内。","server.vaultDiskFull":"磁盘已满：本轮复制已中止（{{detail}}）","server.vaultFailed":"无法完成备份操作。","server.vaultIndexNotReady":"仍在读取历史记录。请在读取完成后再统计。","server.vaultMeasureFirst":"请先统计需要占用多少空间。","server.vaultMemoryFailed":"{{cwd}} 的记忆：{{detail}}","server.vaultMoveFailed":"无法移动备份：{{detail}}","server.vaultMoving":"备份正在移动到另一个文件夹。请在完成后重试。","server.vaultNoCopyYet":"还没有备份。","server.vaultNotLoaded":"备份未加载。","server.vaultProjectGone":"该项目已不在侧边栏中。","server.vaultReasonNewerFormat":"现有副本使用了更新版本的格式","server.vaultReasonOriginMissing":"找不到来源","server.vaultReasonUnsafeId":"会话 ID 无法复制","server.vaultSessionFailed":"{{agent}}/{{session}}: {{detail}}","server.vaultSessionMissing":"该会话不在备份中。","server.vaultTargetCliFolder":"该文件夹属于某个 CLI：备份不能保存在那里。","server.vaultTargetInsideCurrent":"新文件夹不能位于当前备份内。","server.vaultTargetNotAbsolute":"备份文件夹必须是绝对路径。","server.waitingSubmit":"{{label}} 正在等待回答：请先回答，再发送新消息。","server.worktreeBaseAdvanced":"{{base}} 已经前进：分支需要先跟上。没有合并任何内容。","server.worktreeBaseMissing":"此仓库中不存在分支 {{base}}。","server.worktreeBaseNotOpen":"{{base}} 没有在任何文件夹中检出：无处可合并。","server.worktreeBranchExists":"分支 {{branch}} 已存在。","server.worktreeBranchInUse":"分支 {{branch}} 已在另一个文件夹中打开。","server.worktreeBranchInvalid":"{{branch}} 不是有效的分支名。","server.worktreeBranchMissing":"分支 {{branch}} 已不存在。","server.worktreeBranchMoved":"打开此计划后，分支 {{branch}} 又有了变化：请关闭后重新打开，查看将要合入的内容。没有合入任何内容。","server.worktreeBranchNotIntegrated":"分支 {{branch}} 有未合并的提交：没有删除。","server.worktreeDiffEmpty":"此文件相对基础分支没有行改动。","server.worktreeDiscardFailed":"无法删除全部新文件：{{detail}}。分支没有被移除。","server.worktreeFailed":"无法完成独立分支的操作。","server.worktreeFileNotInBranch":"该文件不在分支改动的文件之中。","server.worktreeFolderExists":"文件夹 {{folder}} 已存在。请换一个分支名。","server.worktreeGitFailed":"git 拒绝了：{{detail}}","server.worktreeInUse":"另一个程序正打开着分支的文件夹。请关闭它后再试。","server.worktreeLocalChanges":"基础文件夹中被分支改动的未提交文件：{{count}} 个。git 会拒绝，因此没有合并任何内容。","server.worktreeNoConflicts":"已经没有无法自动拼合的笔记了。","server.worktreeNoReview":"该分支还没有审查。","server.worktreeNotRepo":"这个文件夹不在 git 仓库中。","server.worktreeNotesConflict":"两边都有改动且无法拼合的笔记：{{count}} 条。没有移除任何东西。","server.worktreeNotesFailed":"笔记无法回到主文件夹，因此没有移除任何东西：{{detail}}","server.worktreeNothingToCommit":"分支已经没有未提交的内容了。","server.worktreeNothingToIntegrate":"没有可合并的内容：分支没有基础分支缺少的提交。","server.worktreeNothingToReview":"没有可审查的内容：分支没有自己的提交或更改。","server.worktreeProjectUnknown":"项目的文件夹已不在了。","server.worktreeReviewUnread":"无法读取审查者的回答：如果刚刚结束，请几秒后再试。","server.worktreeUncommitted":"存在未提交更改的文件：{{count}} 个。没有移除任何东西。","server.worktreeUnknown":"该独立分支已不在应用的列表中。","server.worktreeUntrackedChanged":"新文件在你查看之后有了变化。没有移除任何东西。","server.worktreeUpToDate":"分支已经与 {{base}} 同步。","session.untitled":"未命名会话","settings.cli.disabled":"已停用","settings.cli.hint":"取消勾选的 CLI 不会出现在菜单和侧栏中，也不会读取它的历史记录。","settings.cli.install":"安装方法","settings.cli.notInstalled":"未安装","settings.cli.restart":"对 CLI 的更改会在重启应用后生效。","settings.console.auto":"自动","settings.console.autoWith":"自动（{{shell}}）","settings.console.hint":"适用于之后打开的控制台；已打开的保持不变。","settings.hiddenHint":"已隐藏：{{name}}。可在 ⚙ 设置中重新显示。","settings.hide.console":"隐藏控制台（可在 ⚙ 设置中恢复）","settings.hide.notes":"隐藏笔记（可在 ⚙ 设置中恢复）","settings.hostOnly":"控制台和 CLI 只能在运行 Agent Workbench 的电脑上更改。","settings.language":"语言","settings.more.open":"{{name}}…","settings.oldServer":"服务器是旧版本：重启后才能选择控制台和 CLI。","settings.open":"设置","settings.panels.cliAlways":"CLI 标签页始终显示：智能体的权限请求和提问会出现在那里。","settings.panels.consoleConfirmYes":"隐藏并关闭","settings.panels.consoleConfirm_other":"隐藏控制台会关闭 {{count}} 个打开的终端。","settings.section.appearance":"外观","settings.section.clis":"CLI","settings.section.console":"控制台","settings.section.more":"更多","settings.section.panels":"面板","settings.terminalTheme":"终端主题","settings.terminalTheme.dark":"始终深色","settings.terminalTheme.follow":"跟随应用主题","settings.terminalTheme.hint":"CLI 的配色是为深色终端设计的：在浅色终端中，部分文字难以辨认。","settings.title":"设置","shortcuts.altNumber":"<strong>Alt + 数字</strong>同样没有使用，这是有意为之：在 Windows 上，按住 Alt 再用数字小键盘输入编码，可以键入键盘上没有的字符（<kbd>Alt + 164</kbd> = ñ）。拦截它会导致无法输入带重音的字符。切换标签页请使用 <kbd>Alt + ←</kbd> 和 <kbd>Alt + →</kbd>。","shortcuts.app.closeTab":"关闭当前标签页","shortcuts.app.newTab":"在当前标签页的目录中新建标签页","shortcuts.app.previousTab":"返回上一个标签页（焦点在终端外时；在终端内时，按键会交给 CLI）","shortcuts.app.switchTab":"上一个 / 下一个标签页（也可用 Alt + PgUp / PgDn）","shortcuts.app.togglePanel":"显示或隐藏右侧面板","shortcuts.ariaLabel":"键盘快捷键","shortcuts.browserReserved":"<strong>Ctrl+T</strong>、<strong>Ctrl+W</strong> 和 <strong>Ctrl+Tab</strong> 无法使用：浏览器将它们保留给自己的标签页，按键事件永远不会到达页面。","shortcuts.cliHint":"这些快捷键由 CLI 处理。本应用不会拦截它们：按键会原样传给 CLI。在终端中，换行仍然是 <kbd>Ctrl + J</kbd>，粘贴图片用 <kbd>Alt + V</kbd>；上面列出的按键适用于输入框。","shortcuts.section.app":"应用","shortcuts.section.cli":"CLI（终端内）","shortcuts.section.composer":"输入框中","shortcuts.title":"快捷键","sidebar.action.archive":"归档","sidebar.action.restore":"还原","sidebar.action.undo":"撤销","sidebar.archived.hide_other":"隐藏 {{count}} 个已归档会话","sidebar.archived.show_other":"显示 {{count}} 个已归档会话","sidebar.archived.toggleTitle":"已归档的会话仍保存在磁盘上；此按钮只是显示或隐藏它们","sidebar.empty.noMatch":"没有与筛选条件匹配的内容。","sidebar.empty.noProjects":"历史记录中没有找到项目。","sidebar.hide":"隐藏项目列表","sidebar.history.button":"归档历史记录…","sidebar.history.buttonTitle":"一次性隐藏某个 CLI 在今天之前的所有会话。不会删除任何内容","sidebar.history.confirm_other":"将隐藏 {{count}} 个 {{label}} 会话；不会删除任何内容","sidebar.history.count_other":"今天之前的 {{count}} 个会话","sidebar.history.heading":"归档今天之前的所有内容","sidebar.history.region":"归档历史记录","sidebar.indexing":"正在索引 {{scanned}} / {{total}}","sidebar.newProject":"新建项目：选择或创建一个文件夹","sidebar.project.archive":"归档项目","sidebar.project.archiveTitle":"归档项目：在侧边栏中隐藏其对话。不会删除任何内容","sidebar.project.export":"导出为 Markdown","sidebar.project.folderGone":"磁盘上已不存在该文件夹","sidebar.project.missing":"找不到文件夹","sidebar.project.newSession":"在此项目中新建会话","sidebar.reindex":"重新索引历史记录","sidebar.searchMode.label":"搜索范围","sidebar.searchMode.titlesTitle":"按项目名称和会话标题筛选列表","sidebar.selection.count_other":"已选择 {{count}} 个","sidebar.session.archive":"归档 — 从列表中隐藏，不会删除任何内容","sidebar.session.blocked":"此会话有打开的标签页。请先关闭标签页。","sidebar.session.restore":"还原到列表","sidebar.undo.dismissTitle":"关闭提示；会话仍保持归档","sidebar.undo.text_other":"已归档 {{what}} 的 {{count}} 个会话","sidebar.vaultLine.lastError":"最近一次错误：{{error}}","sidebar.vaultLine.title":"查看备份的状态和文件夹","sound.notify.blocked":"浏览器阻止了此页面的通知。请在网站设置中允许通知，然后再点一次。","sound.notify.off":"系统通知已关闭 — 点击开启","sound.notify.on":"系统通知已开启 — 点击关闭。仅在此窗口不可见时显示。","sound.off":"提示音已静音 — 点击开启","sound.on":"提示音已开启 — 点击静音","sound.volume":"提示音音量","statusLine.benefit":"配置 status line 后，此 CLI 的标签页会显示其状态，在它请求使用工具的权限时显示“等待中”提示栏，上下文用量会显示确切的窗口大小，还会显示剩余配额。不配置就无法得知这些信息：CLI 不会把它们写入任何其他文件。","statusLine.check":"检查","statusLine.checkHint":"本应用也会在几秒内自动检测到。","statusLine.checking":"正在检查…","statusLine.copied":"已复制","statusLine.copy":"复制","statusLine.copyTitle":"将配置行复制到剪贴板","statusLine.lineSection":"配置行","statusLine.mergeHint":"将其与下方文件中的现有内容合并，不要替换：如果文件中已有大括号，只需添加 <kbd>statusLine</kbd> 键。","statusLine.planBenefit":"配置 status line 后，对话上方的栏会显示你在 5 小时窗口和本周内用了多少套餐额度，以及各自何时重置。CLI 不会把这些写入任何其他文件，并且只在订阅套餐中提供。","statusLine.planNoFragment":'本应用的文件夹路径中含有控制台会在引号内解释的字符（$、` 或 "），因此无法生成 CLI 能运行的命令行。将配置文件夹移到不含这些字符的路径即可解决。',"statusLine.planReplaces":"CLI 只允许一个 status line：这个会替换你已有的任何其他 status line。而且配置了 status line 后，CLI 会不再显示底部的部分提示，例如“esc to interrupt”。","statusLine.planScriptHint":"它只会把两个限制和会话 ID 保存到本应用的文件夹中，并在 CLI 底部用一行简短文字显示。CLI 同样会把文件夹、对话记录、费用和模型传给它，但它不会保存这些信息。","statusLine.runsEverywhere":"配置行生效后，CLI 的每个会话都会运行它，包括你在本应用之外打开的会话，并且需要 PATH 中有 <kbd>node</kbd>。","statusLine.scriptHint":"它只会将每个对话的状态、模型、token 用量以及剩余配额保存到本应用的文件夹中。CLI 同样会把你的邮箱、套餐和费用传给它，但它不会保存这些信息，也不会输出任何内容：CLI 自身的 status line 保持原样。","statusLine.scriptSection":"脚本的作用","statusLine.title":"{{agent}} 的 status line","statusLine.whereHint":"本应用不会修改该文件：需要你自己编辑。","statusLine.whereSection":"位置","summary.alsoWorksWith":"还支持：{{names}}","summary.newerServer":"服务器的版本比此页面新（服务器协议 {{server}}，此页面使用 {{page}}）。请按 F5 重新加载页面。","summary.outdatedServer":"正在运行的服务器版本比此页面旧（服务器协议 {{server}}，此页面使用 {{page}}）。请重启服务器并重新加载页面。","support.dismiss":"暂不","support.link":"支持","support.notice":"如果 Agent Workbench 对你有用，请考虑支持这个项目。","tabs.aria.opening":"正在打开","tabs.aria.working":"工作中","tabs.close":"关闭（Alt+W）","tabs.dot.busy":"代理正在工作","tabs.dot.exited":"此标签页的 CLI 已关闭","tabs.dot.sleeping":"休眠：可查看，未打开 CLI","tabs.dot.waiting":"CLI 正在等待你的回答","tabs.new":"新建标签页（Alt+T）","tabs.state.alive":"运行中","tabs.state.exited":"已退出（代码 {{code}}）","tabs.state.opening":"正在打开…","tabs.state.sleeping":"休眠","terminal.exited":"进程已退出（代码 {{code}}）","terminal.replayTruncated":"较早的输出已截断","theme.dark":"深色主题","theme.light":"浅色主题","theme.system":"系统主题","theme.title":"{{theme}} — 点击切换","thread.continueCli":"CLI","thread.copyMessage":"复制此消息的文本","thread.empty.noMessages":"此会话还没有任何消息。","thread.empty.unavailable":"此标签页没有已知的目录，因此没有可跟踪的会话文件。","thread.empty.waiting":"正在等待第一条消息。会话文件会在对话开始时创建。","thread.fold.less":"收起","thread.fold.more_other":"展开 {{count}} 行","thread.goToCli":"转到 CLI 标签页","thread.image.alt":"消息图片","thread.image.gone":"图片已不在文件中","thread.image.loading":"正在加载图片…","thread.image.openTitle":"点击查看大图","thread.jumpToEnd":"跳到末尾","thread.jumpToEndNew_other":"跳到末尾：{{count}} 条新消息","thread.jumpToOwn":"跳到我的上一条消息","thread.loadEarlier":"加载更早的消息","thread.loadingMore":"正在加载…","thread.notice.compacted":"上下文已压缩","thread.notice.compactedAuto":"上下文已自动压缩","thread.notice.error":"CLI 返回了错误：{{detail}}","thread.notice.errorNoDetail":"CLI 返回了错误","thread.notice.interrupted":"已中断","thread.openFolder":"在系统文件管理器中打开 {{path}}","thread.openInFiles":"在“文件”标签页中打开 {{path}}","thread.pasted_other":"粘贴的文本 #{{number}} · {{count}} 行","thread.question.answerInCli":"在 CLI 标签页中回答","thread.question.answered":"已回答","thread.question.multi":"多选","thread.question.pickEach":"请在每个问题中选择一个选项 · 也可以在 CLI 标签页中回答","thread.question.pickOne":"请选择一个选项 · 也可以在 CLI 标签页中回答","thread.question.placeholder":"输入你的回答","thread.question.send":"发送","thread.question.sendAnswers":"发送回答","thread.question.useText":"使用此文本","thread.question.writeOther":"输入其他回答…","thread.question.writeOtherHint":"用于提出替代方案，或补充更多背景信息","thread.queue.edit":"编辑","thread.queue.editTitle_other":"把排队的消息（{{count}} 条）全部取出，放回输入框以便编辑：CLI 无法只取出一条。在空输入框中按 ↑ 也一样","thread.queue.editing":"正在取回…","thread.queue.forceBlocked":"CLI 正在等待你的回答：请先回答","thread.queue.forceSend":"立即强制发送","thread.queue.forceSendTitle":"代理会停下手头的工作，立即读取你的消息。在它走错方向时使用","thread.queue.forced":"已发送给代理","thread.queue.forcedTitle":"你已强制发送：CLI 正在把它交给代理，CLI 记录后会显示在对话中","thread.queue.forcing":"正在发送…","thread.queue.images_other":"+{{count}} 张图片","thread.queue.label":"排队中","thread.queue.labelTitle":"你在代理工作时发送了这条消息：等代理可以读取时，CLI 会转交给它","thread.rewind":"回到这条消息之前","thread.rewindBusy":"要回到这条消息之前，请先停止代理","thread.search.next":"下一个","thread.search.none":"没有结果","thread.search.placeholder":"在对话中搜索","thread.search.previous":"上一个","thread.status.awaitingReply":"已送达 CLI · 尚无回复 · {{elapsed}}","thread.status.delivered":"已送达 CLI","thread.status.sending":"正在发送到 CLI…","thread.status.subagent":"{{name}}（{{elapsed}}）","thread.status.subagentUnnamed":"未命名","thread.status.subagentsMore_other":"另外 {{count}} 个","thread.status.subagents_other":"{{count}} 个子代理仍在工作：{{list}}","thread.status.working":"代理正在工作…","thread.status.workingDelivered":"代理正在工作 · 消息已送达","thread.status.workingFor":"代理正在工作 · {{elapsed}}","thread.status.workingForDelivered":"代理正在工作 · {{elapsed}} · 消息已送达","thread.tool.error":"错误","thread.tool.imagesNotSent_other":"（{{count}} 张图片：未传送到面板）","thread.tool.images_other":"{{count}} 张图片","thread.tool.input":"输入","thread.tool.noOutput":"（无输出）","thread.tool.orphanResult":"孤立的结果","thread.tool.result":"结果","thread.truncated":"…（已截断）","thread.turn.effort":"推理强度 {{effort}}","thread.turn.queued":"在代理工作时发送","thread.turn.queuedTitle":"你是在代理工作时写下这条消息的：它进入了当时正在进行的那一轮","thread.turn.you":"你","thread.wake.exited":"此标签页的 CLI 已关闭。","thread.wake.exitedWithCode":"此标签页的 CLI 已关闭（退出代码 {{code}}）。","thread.wake.open":"打开 CLI","thread.wake.opening":"正在打开…","thread.wake.sleeping":"你正在查看此对话，但 CLI 尚未打开。打开 CLI 后才能向代理发送消息。","threadFont.size.l":"大","threadFont.size.m":"标准","threadFont.size.s":"小","threadFont.title":"字号：{{current}}（点击切换为{{next}}）","time.daysAgo":"{{count}} 天前","time.hoursAgo":"{{count}} 小时前","time.justNow":"刚刚","time.minutesAgo":"{{count}} 分钟前","tools.run.agent_other":"{{count}} 个子代理","tools.run.callsTo_other":"调用 {{name}} {{count}} 次","tools.run.edit_other":"{{count}} 次编辑","tools.run.find_other":"{{count}} 次项目搜索","tools.run.read_other":"读取 {{count}} 个文件","tools.run.shell_other":"{{count}} 条控制台命令","tools.run.todo_other":"{{count}} 个待办列表","tools.run.web_other":"{{count}} 次搜索","vault.archived":"已归档的会话不会被复制；归档一个已复制的会话也不会删除其副本。本应用从不删除此文件夹中的任何内容。","vault.busy":"备份操作正在进行中。请等待其完成。","vault.button.off":"备份：已关闭。点击设置","vault.button.on":"备份：已开启。查看状态和文件夹","vault.dialog.activate":"开启","vault.dialog.activateExistingHint":"该文件夹中已有备份。开启后会将其补全并保持更新。","vault.dialog.activateExistingTitle":"该文件夹中已有备份：开启后会将其补全","vault.dialog.activateMeasuredHint":"复制已统计的全部内容；之后，每个发生变化的会话在静默一分钟后也会被复制。","vault.dialog.activateMeasuredTitle":"立即复制已统计的内容，之后复制每个发生变化的会话","vault.dialog.changeDir":"更改文件夹…","vault.dialog.changeDirTitle":"选择另一个文件夹。已复制的内容会复制过去；当前文件夹保持不变","vault.dialog.defaultDir":"这是默认位置，在本应用的文件夹中。","vault.dialog.folderSection":"文件夹","vault.dialog.inFolder":"文件夹中已有","vault.dialog.lastError":"最近一次错误","vault.dialog.lastPass":"上次复制：{{when}}","vault.dialog.measure":"统计","vault.dialog.measureAgain":"重新统计","vault.dialog.measureTitle":"读取全部历史记录，不写入任何内容，也不会创建文件夹","vault.dialog.needsMeasure":"请先统计需要占用多少空间：之后会出现“{{activate}}”按钮。","vault.dialog.openFolder":"打开文件夹","vault.dialog.openFolderTitle":"在系统文件管理器中打开该文件夹","vault.dialog.pendingCalm_other":"{{count}} 个会话等待静默一分钟","vault.dialog.sizeSection":"预计占用空间","vault.dialog.table.archived":"已归档","vault.dialog.table.archivedTitle":"已归档的会话不会被复制","vault.dialog.table.images":"图片","vault.dialog.table.memory_other":"{{count}} 个项目的记忆","vault.dialog.table.sessions":"会话","vault.dialog.table.size":"大小","vault.dialog.table.total":"合计","vault.dialog.turnOff":"关闭","vault.dialog.turnOffHint":"关闭不会删除任何内容：已复制的内容会保留在文件夹中。","vault.dialog.waiting":"正在等待服务器状态…","vault.export.done":"已导出：已打开所在文件夹","vault.export.exporting":"正在导出为 Markdown…","vault.export.idle":"将此项目的会话导出为 Markdown","vault.indexNotReady":"仍在读取历史记录。请在读取完成后再统计。","vault.line.copying":"正在复制","vault.line.copyingProgress":"正在复制 {{done}} / {{total}}","vault.line.measuring":"正在统计","vault.line.moving":"正在移动到另一个文件夹","vault.line.neverCopied":"尚未复制","vault.line.pending_other":"{{count}} 个等待中","vault.mark.copy":"备份","vault.mark.copyTitle":"CLI 的历史记录中已没有此会话。将以 Markdown 格式打开备份。","vault.mark.partial":"部分","vault.mark.partialTitle":"只恢复了摘要和文档：对话内容是加密的。","vault.measure.summary":"统计时间：{{when}}，耗时 {{duration}}","vault.measure.summaryNoWhen":"统计耗时 {{duration}}","vault.name":"备份","vault.note.empty_other":"{{count}} 个为空","vault.note.failedWithReasons_other":"{{count}} 个失败（{{reasons}}）","vault.note.failed_other":"{{count}} 个失败","vault.note.notCopied":"未复制：{{parts}}","vault.note.unsupported_other":"{{count}} 个无法完整读取","vault.previousDir":"原文件夹保持不变：{{dir}}","vault.privacy":"它保存的内容与各 CLI 的历史记录相同（消息、工具的输入和结果、图片），存放在你自己的文件夹中。如果将它放在同步文件夹或代码仓库中，这些内容也会随之被同步或提交。","vault.sessions_other":"{{count}} 个会话","vault.state.measuring":"正在统计…","vault.state.measuringProgress":"正在统计… {{done}} / {{total}}","vault.state.moving":"正在移动到另一个文件夹…","vault.state.off":"已关闭","vault.state.on":"已开启","vault.state.writing":"正在复制…","vault.state.writingProgress":"正在复制… {{done}} / {{total}}","workspace.connectFailed":"无法连接到本地服务器。请重新打开服务器启动时打印的 URL。","worktree.actions.catchUp":"跟上","worktree.actions.catchUpTitle":"在分支的输入框中放入请求（不发送）：由其代理通过 rebase 引入 {{base}}","worktree.actions.integrate":"合并到 {{base}}","worktree.actions.integrateTitle":"用 git merge --ff-only 把 {{base}} 前移到分支末端，不创建提交。先显示计划","worktree.actions.review":"请求审查","worktree.actions.reviewTitle":"另一个 CLI 在分支文件夹中审查它（不做修改），并给出结论","worktree.actions.sendReview":"交给分支","worktree.actions.sendReviewTitle":"把审查者的回答放进分支标签页的输入框，不发送：由你阅读后发送","worktree.actions.showReviewer":"查看","worktree.actions.showReviewerTitle":"转到审查者的标签页","worktree.actions.viewChanges":"查看更改","worktree.actions.viewChangesTitle":"此分支相对基础分支带来的内容：提交和文件，只读","worktree.branch.characters":"只能使用不带重音的字母、数字、-、_、. 和 /。","worktree.branch.dots":"不能包含 ..，也不能有以点开头或结尾的部分。","worktree.branch.empty":"请为分支起个名字。","worktree.branch.lock":"任何部分都不能以 .lock 结尾。","worktree.branch.reserved":"这个名称是保留的。","worktree.branch.slashes":"开头和结尾不能是 /，也不能连续两个 /。","worktree.branch.startsWithDash":"不能以 - 开头。","worktree.branch.tooLong":"太长了：最多 100 个字符。","worktree.changes.commits":"提交","worktree.changes.empty":"分支相对 {{base}} 没有提交。","worktree.changes.files":"文件","worktree.changes.loading":"正在读取分支带来的内容…","worktree.changes.more_other":"还有 {{count}} 个","worktree.changes.title":"{{branch}} 相对 {{base}}","worktree.changes.uncommitted_other":"分支有 {{count}} 个未提交的文件：它们不在这里，而在其标签页的“更改”中。","worktree.copy.summary_other":"{{count}} 个文件，{{size}}","worktree.create.agent":"CLI","worktree.create.baseMissing":"请选择它的起点分支。","worktree.create.branch":"分支","worktree.create.branchExists":"该分支已存在。要打开它，请选择“已有的分支”。","worktree.create.branchInUse":"该分支已在另一个文件夹中打开。","worktree.create.branchPlaceholder":"例如 fix-login","worktree.create.command":"命令","worktree.create.copyList":"{{summary}}：{{list}}。","worktree.create.copyNone":"仓库没有忽略任何指令或记忆：没有要复制的内容。","worktree.create.copyNotes":"复制仓库忽略的指令和记忆。","worktree.create.copySection":"被忽略的笔记","worktree.create.creating":"正在创建…","worktree.create.folder":"文件夹","worktree.create.include":".worktreeinclude 要求的内容也会复制：{{summary}}。","worktree.create.includeOverCap":".worktreeinclude 要求的内容超出上限（{{summary}}），因此不复制。","worktree.create.intro":"分支在 {{project}} 旁边有自己的文件夹，因此它的代理工作时不会碰到主文件夹或其他分支。只在你需要时使用：不打开独立分支的项目保持原样。","worktree.create.loading":"正在读取仓库…","worktree.create.mainChanges_other":"主文件夹有 {{count}} 个文件存在未提交的更改：新分支从最后一次提交开始，不会带走这些更改。","worktree.create.modeExisting":"已有的分支","worktree.create.modeNew":"新分支，起点","worktree.create.noFreeBranch":"其他分支都已在某个文件夹中打开。","worktree.create.overCap":"{{summary}}：超出上限，因此不复制。","worktree.create.submit":"创建并打开","worktree.create.title":"在独立分支中新建会话","worktree.deleteBranch.checkedOut":"分支 {{branch}} 正在某个文件夹中打开：请先移除那个文件夹。","worktree.deleteBranch.deleting":"正在删除…","worktree.deleteBranch.done":"分支 {{branch}} 已删除。","worktree.deleteBranch.intro":"该分支已合并到 {{base}}：不会丢失任何提交，它的对话仍可从侧边栏重新打开。","worktree.deleteBranch.loading":"正在查看分支…","worktree.deleteBranch.noBase":"{{base}} 已不存在：无法确定该分支是否有未合并的提交，因此这里不会删除。如果你确定不会丢失任何内容，请在终端中删除。","worktree.deleteBranch.notIntegrated_other":"它有 {{count}} 个 {{base}} 没有的提交：为免丢失，这里不会删除。请从侧边栏重新打开并合并，或在终端中删除。","worktree.deleteBranch.submit":"删除","worktree.deleteBranch.title":"删除分支 {{branch}}","worktree.integrate.blockerBehind":"{{base}} 已经前进：请先跟上。","worktree.integrate.blockerLocal_other":"{{base}} 文件夹中有 {{count}} 个被分支改动的文件存在未提交更改，git 会拒绝：{{list}}。请先在那里提交或撤销。","worktree.integrate.blockerNoBase":"{{base}} 没有在任何文件夹中检出。","worktree.integrate.blockerNothing":"没有可合并的内容：分支没有 {{base}} 缺少的提交。","worktree.integrate.branchUncommitted_other":"分支有 {{count}} 个未提交的文件：它们不会进入。","worktree.integrate.command":"命令","worktree.integrate.doneOthers":"其他分支会显示 {{base}} 已经前进。独立分支仍在：现在可以移除它。","worktree.integrate.done_other":"完成：{{base}} 现在包含分支的 {{count}} 个提交。","worktree.integrate.files_other":"改动的文件 {{count}} 个：{{list}}","worktree.integrate.folder":"位置","worktree.integrate.integrating":"正在合并…","worktree.integrate.intro_other":"{{count}} 个提交进入 {{base}}，不创建新提交：{{base}} 前移到分支末端。","worktree.integrate.loading":"正在生成计划…","worktree.integrate.noReview":"没有人审查过此分支。这不会阻止合并：由你决定。","worktree.integrate.notesStay":"这些笔记两边都有改动，无法自动拼合：{{list}}。它们留在分支中，移除分支时再决定怎么处理。","worktree.integrate.notesStayed":"这些笔记无法自动拼合，留在了分支中：{{list}}。移除分支时再决定怎么处理。","worktree.integrate.remove":"移除独立分支","worktree.integrate.removeTitle":"打开移除其文件夹的计划","worktree.integrate.submit":"合并","worktree.integrate.tabs":"这些标签页的文件会改变：{{list}}。","worktree.integrate.title":"把 {{branch}} 合并到 {{base}}","worktree.integrate.titleLoading":"合并 {{branch}}","worktree.new":"在独立分支中新建会话","worktree.notes.back_other":"{{count}} 条笔记回到主文件夹。","worktree.notes.hide":"隐藏","worktree.notes.mergedMark":"拼合","worktree.notes.merged_other":"其中 {{count}} 条与那边的改动拼合。","worktree.notes.resolved_other":"分支的代理已经拼合了：{{list}}。主文件夹中保持原样。","worktree.notes.returned_other":"{{count}} 条笔记已回到主文件夹。","worktree.notes.show":"查看是哪些","worktree.remove.askCommit_other":"请代理提交","worktree.remove.askNotes":"请代理把它们拼合","worktree.remove.askTitle":"把请求放进分支标签页的输入框，不发送","worktree.remove.commands":"命令","worktree.remove.conflicts":"这些笔记两边都有改动，无法自动拼合：{{list}}。如果现在移除分支，分支对它们的改动会丢失。","worktree.remove.deletesBranch":"它已经合并：会删除它的文件夹和分支 {{branch}}。它的对话仍可从侧边栏重新打开。","worktree.remove.deletesUnusedBranch":"它没有自己的提交：会删除它的文件夹和分支 {{branch}}。它的对话仍可从侧边栏重新打开。","worktree.remove.discard":"移除并丢弃这些改动","worktree.remove.discardFiles":"移除并丢弃这些文件","worktree.remove.done":"独立分支已移除。","worktree.remove.doneBranch":"分支也已删除。","worktree.remove.doneDiscardedFiles_other":"按你的选择，{{count}} 个新文件已丢失。","worktree.remove.doneDiscarded_other":"按你的选择，{{count}} 条笔记已丢失。","worktree.remove.holder":"{{program}}（{{exe}}，PID {{pids}}）","worktree.remove.holderExe":"{{exe}}（PID {{pids}}）","worktree.remove.inUse":"另一个程序（编辑器、开发服务器）正打开着这个文件夹。请关闭它后再试。","worktree.remove.inUseBy_other":"{{list}} 正打开着这个文件夹。请关闭后再试。","worktree.remove.keepsBranch":"它还没有合并：会移除它的文件夹，分支 {{branch}} 保留在“更改”中，之后可以合并或重新打开。","worktree.remove.keepsExistingBranch":"分支 {{branch}} 原本就存在：只移除它的文件夹，分支保留。","worktree.remove.loading":"正在检查它的文件夹…","worktree.remove.removing":"正在移除…","worktree.remove.retry":"重试","worktree.remove.submit":"移除","worktree.remove.tabs":"将关闭：{{list}}。","worktree.remove.title":"移除独立分支 {{branch}}","worktree.remove.uncommitted_other":"它有 {{count}} 个未提交的文件，有未提交工作的分支不会被移除：","worktree.remove.untrackedAccepted":"会随分支一起丢弃：","worktree.remove.untrackedCopied":"它有未提交的新文件，其中有从主文件夹复制过来、而这个分支没有忽略的内容：不能在这里丢弃。请代理提交或删除它：","worktree.remove.untrackedNestedRepo":"它有未提交的新文件，其中有一个 git 仓库（里面可能有别处没有的提交）：不能在这里丢弃。如果不需要，请代理删除它：","worktree.remove.untrackedTooMany":"它有超过 {{max}} 个未提交的新文件：太多了，无法在这里检查并丢弃。如果不需要，请代理删除它们：","worktree.remove.untracked_other":"它有 {{count}} 个未提交的新文件（{{size}}）。如果是工作成果，请代理提交；如果不需要，可以移除分支并丢弃它们：","worktree.review.author":"在分支上工作的是 {{agent}}：换一个 CLI 能看出它想当然的地方。","worktree.review.branchBusy":"分支的标签页正在工作：审查可能看到未完成的状态。","worktree.review.deliveryPrefill":"请求会留在其输入框中：由你按 Enter 发送。","worktree.review.deliverySent":"CLI 就绪后请求会自动发送。","worktree.review.guardCli":"{{agent}} 以只读方式启动：无法修改分支。","worktree.review.guardNone":"{{agent}} 可以修改分支的文件：请求会告诉它不要这样做。","worktree.review.guardTools":"{{agent}} 启动时没有编辑工具，但它的终端仍可能写入：请求会告诉它不要这样做。","worktree.review.intro":"另一个 CLI 在分支文件夹中审查它相对 {{base}} 的改动，并以结论结束。测试和合并仍由你决定。","worktree.review.loading":"正在查看分支…","worktree.review.nothing":"相对 {{base}}，分支没有可审查的内容。","worktree.review.prompt":"发送的内容","worktree.review.quota":"每次审查都会消耗审查 CLI 的额度。","worktree.review.requesting":"正在打开…","worktree.review.reviewer":"审查者","worktree.review.sameCli":"由 {{agent}} 在新的对话中审查。","worktree.review.stale":"{{text}}（针对较早的提交）","worktree.review.stateChanges":"{{agent}} 的审查：需要修改","worktree.review.stateNone":"{{agent}} 的审查：没有结论","worktree.review.statePending":"{{agent}} 的审查：尚未回答","worktree.review.stateReady":"{{agent}} 的审查：可以合并","worktree.review.stateWorking":"{{agent}} 的审查：进行中","worktree.review.submit":"请求审查","worktree.review.title":"请求审查 {{branch}}","worktree.review.uncommitted_other":"分支有 {{count}} 个未提交的文件：审查者也会查看。","worktree.rows.ahead_other":"领先 {{count}} 个提交","worktree.rows.behind_other":"{{base}} 新增了 {{count}} 个提交","worktree.rows.changes_other":"{{count}} 个未提交","worktree.rows.clean":"无更改","worktree.rows.current":"此标签页","worktree.rows.deleteBranch":"删除分支","worktree.rows.deleteBranchTitle":"打开用 git branch -d 删除分支的计划","worktree.rows.heading":"独立分支","worktree.rows.headingTitle":"此仓库的其他文件夹，每个都有自己的分支","worktree.rows.integrated":"已合并","worktree.rows.kept":"文件夹已移除","worktree.rows.keptTitle":"应用已移除它的文件夹，分支仍在仓库中：它的对话可以从侧边栏重新打开","worktree.rows.main":"主文件夹","worktree.rows.mergeClean":"无冲突","worktree.rows.mergeConflicts_other":"{{count}} 个文件冲突：{{list}}","worktree.rows.notIntegrated_other":"{{count}} 个提交未合并","worktree.rows.open":"打开","worktree.rows.openTitle":"转到它的标签页，或在该文件夹中打开一个","worktree.rows.overlap":"{{branch}} 也改动了：{{list}}","worktree.rows.remove":"移除","worktree.rows.removeTitle":"移除它的文件夹；除非已合并，否则分支会保留","worktree.sidebar.branchTitle":"在独立分支 {{branch}} 中工作过","worktree.sidebar.removed":"已移除","worktree.sidebar.removedTitle":"此对话在一个独立分支中工作过，该分支的文件夹已被移除","worktree.sidebar.reopen":"重新打开分支","worktree.sidebar.reopenTitle":"重新打开分支：在同一文件夹中重新取出它（如果已删除，会在它最后所在的提交上重新创建），并继续此对话","worktree.tab.linkedTitle":"分支 {{branch}}，独立于 {{main}}","worktree.tab.mainTitle":"分支 {{branch}}，位于主文件夹","worktree.tab.review":"审查","worktree.tab.reviewTitle":"审查标签页：若 CLI 支持，它以只读方式启动"};export{e as default};