@zwave-js/config 8.8.3 → 8.9.0-beta.0

package/config/devices/0x027a/zen16_1.2_1.2.json

@@ -1,474 +0,0 @@
-{
-	"manufacturer": "Zooz",
-	"manufacturerId": "0x027a",
-	"label": "ZEN16",
-	"description": "Multirelay",
-	"devices": [
-		{
-			"productType": "0xa000",
-			"productId": "0xa00a"
-		}
-	],
-	"firmwareVersion": {
-		"min": "1.2",
-		"max": "1.2"
-	},
-	"associations": {
-		"1": {
-			"label": "Lifeline",
-			"maxNodes": 1,
-			"isLifeline": true
-		},
-		"2": {
-			"label": "Relay 1 Status",
-			"maxNodes": 5
-		},
-		"3": {
-			"label": "Relay 2 Status",
-			"maxNodes": 5
-		},
-		"4": {
-			"label": "Relay 3 Status",
-			"maxNodes": 5
-		}
-	},
-	"paramInformation": [
-		{
-			"#": "1",
-			"label": "Status After Power Failure",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 4,
-			"defaultValue": 1,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "All relays - Off",
-					"value": 0
-				},
-				{
-					"label": "All relays - Previous state",
-					"value": 1
-				},
-				{
-					"label": "All relays - On",
-					"value": 2
-				},
-				{
-					"label": "Relays 1/2 - Previous state; Relays 3/4 - Off",
-					"value": 3
-				},
-				{
-					"label": "Relays 1/2 - Previous state, Relays 3/4 - On",
-					"value": 4
-				}
-			]
-		},
-		{
-			"#": "2",
-			"label": "Switch Type for Relay 1 (Sw1)",
-			"description": "Choose the wall switch type you want to connect to the Sw1 terminal.",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 3,
-			"defaultValue": 2,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Momentary Switch",
-					"value": 0
-				},
-				{
-					"label": "Toggle switch (follow switch)",
-					"value": 1
-				},
-				{
-					"label": "Toggle switch (change state on toggle)",
-					"value": 2
-				},
-				{
-					"label": "Garage door (momentary mode for Z-Wave control)",
-					"value": 3
-				}
-			]
-		},
-		{
-			"#": "3",
-			"label": "Switch Type for Relay 2 (Sw2)",
-			"description": "Choose the wall switch type you want to connect to the Sw2 terminal.",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 3,
-			"defaultValue": 2,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Momentary Switch",
-					"value": 0
-				},
-				{
-					"label": "Toggle switch (follow switch)",
-					"value": 1
-				},
-				{
-					"label": "Toggle switch (change state on toggle)",
-					"value": 2
-				},
-				{
-					"label": "Garage door (momentary mode for Z-Wave control)",
-					"value": 3
-				}
-			]
-		},
-		{
-			"#": "4",
-			"label": "Switch Type for Relay 3 (Sw3)",
-			"description": "Choose the wall switch type you want to connect to the Sw3 terminal.",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 3,
-			"defaultValue": 2,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Momentary Switch",
-					"value": 0
-				},
-				{
-					"label": "Toggle switch (follow switch)",
-					"value": 1
-				},
-				{
-					"label": "Toggle switch (change state on toggle)",
-					"value": 2
-				},
-				{
-					"label": "Garage door (momentary mode for Z-Wave control)",
-					"value": 3
-				}
-			]
-		},
-		{
-			"#": "5",
-			"label": "LED Indicator Control",
-			"description": "Choose the LED indicator behavior",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 3,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "On when all relays are off",
-					"value": 0
-				},
-				{
-					"label": "On when any relays is on",
-					"value": 1
-				},
-				{
-					"label": "Always off",
-					"value": 2
-				},
-				{
-					"label": "Always on",
-					"value": 3
-				}
-			]
-		},
-		{
-			"#": "6",
-			"label": "Auto Turn-Off Timer for Relay 1",
-			"description": "Sets the time after which you want relay 1 to automatically turn off once it has been turned on, using the unit defined in parameter 15.",
-			"valueSize": 4,
-			"minValue": 0,
-			"maxValue": 65535,
-			"defaultValue": 0,
-			"unsigned": true
-		},
-		{
-			"#": "7",
-			"label": "Auto Turn-On Timer for Relay 1",
-			"description": "Sets the time after which you want relay 1 to automatically turn off once it has been turned on, using the unit defined in parameter 16.",
-			"valueSize": 4,
-			"minValue": 0,
-			"maxValue": 65535,
-			"defaultValue": 0,
-			"unsigned": true
-		},
-		{
-			"#": "8",
-			"label": "Auto Turn-Off Timer for Relay 2",
-			"description": "Sets the time after which you want relay 1 to automatically turn off once it has been turned on, using the unit defined in parameter 17.",
-			"valueSize": 4,
-			"minValue": 0,
-			"maxValue": 65535,
-			"defaultValue": 0,
-			"unsigned": true
-		},
-		{
-			"#": "9",
-			"label": "Auto Turn-On Timer for Relay 2",
-			"description": "Sets the time after which you want relay 1 to automatically turn off once it has been turned on, using the unit defined in parameter 18.",
-			"valueSize": 4,
-			"minValue": 0,
-			"maxValue": 65535,
-			"defaultValue": 0,
-			"unsigned": true
-		},
-		{
-			"#": "10",
-			"label": "Auto Turn-Off Timer for Relay 3",
-			"description": "Sets the time after which you want relay 1 to automatically turn off once it has been turned on, using the unit defined in parameter 19.",
-			"valueSize": 4,
-			"minValue": 0,
-			"maxValue": 65535,
-			"defaultValue": 0,
-			"unsigned": true
-		},
-		{
-			"#": "11",
-			"label": "Auto Turn-On Timer for Relay 3",
-			"description": "Sets the time after which you want relay 1 to automatically turn off once it has been turned on, using the unit defined in parameter 20.",
-			"valueSize": 4,
-			"minValue": 0,
-			"maxValue": 65535,
-			"defaultValue": 0,
-			"unsigned": true
-		},
-		{
-			"#": "12",
-			"label": "Enable/Disable Manual Control for SW1",
-			"description": "Determine whether you can control the indicated switch manually.",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 2,
-			"defaultValue": 1,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disabled",
-					"value": 0
-				},
-				{
-					"label": "Enabled",
-					"value": 1
-				},
-				{
-					"label": "Local control disabled with enable on/off reports",
-					"value": 2
-				}
-			]
-		},
-		{
-			"#": "13",
-			"label": "Enable/Disable Manual Control for SW2",
-			"description": "Determine whether you can control the indicated switch manually.",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 2,
-			"defaultValue": 1,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disabled",
-					"value": 0
-				},
-				{
-					"label": "Enabled",
-					"value": 1
-				},
-				{
-					"label": "Local control disabled with enable on/off reports",
-					"value": 2
-				}
-			]
-		},
-		{
-			"#": "14",
-			"label": "Enable/Disable Manual Control for SW3",
-			"description": "Determine whether you can control the indicated switch manually.",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 2,
-			"defaultValue": 1,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disabled",
-					"value": 0
-				},
-				{
-					"label": "Enabled",
-					"value": 1
-				},
-				{
-					"label": "Local control disabled with enable on/off reports",
-					"value": 2
-				}
-			]
-		},
-		{
-			"#": "15",
-			"label": "Auto Turn-Off Timer Unit for Relay 1",
-			"description": "Choose between second, minutes, and hours as the unit for Auto Turn-Off time for Relay 1.",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 2,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Minutes",
-					"value": 0
-				},
-				{
-					"label": "Seconds",
-					"value": 1
-				},
-				{
-					"label": "Hours",
-					"value": 2
-				}
-			]
-		},
-		{
-			"#": "16",
-			"label": "Auto Turn-On Timer Unit for Relay 1",
-			"description": "Choose between second, minutes, and hours as the unit for Auto Turn-On time for Relay 1.",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 2,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Minutes",
-					"value": 0
-				},
-				{
-					"label": "Seconds",
-					"value": 1
-				},
-				{
-					"label": "Hours",
-					"value": 2
-				}
-			]
-		},
-		{
-			"#": "17",
-			"label": "Auto Turn-Off Timer Unit for Relay 2",
-			"description": "Choose between second, minutes, and hours as the unit for Auto Turn-Off time for Relay 2.  Default: minutes",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 2,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Minutes",
-					"value": 0
-				},
-				{
-					"label": "Seconds",
-					"value": 1
-				},
-				{
-					"label": "Hours",
-					"value": 2
-				}
-			]
-		},
-		{
-			"#": "18",
-			"label": "Auto Turn-On Timer Unit for Relay 2",
-			"description": "Choose between second, minutes, and hours as the unit for Auto Turn-On time for Relay 2.",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 2,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Minutes",
-					"value": 0
-				},
-				{
-					"label": "Seconds",
-					"value": 1
-				},
-				{
-					"label": "Hours",
-					"value": 2
-				}
-			]
-		},
-		{
-			"#": "19",
-			"label": "Auto Turn-Off Timer Unit for Relay 3",
-			"description": "Choose between second, minutes, and hours as the unit for Auto Turn-Off time for Relay 3.",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 2,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Minutes",
-					"value": 0
-				},
-				{
-					"label": "Seconds",
-					"value": 1
-				},
-				{
-					"label": "Hours",
-					"value": 2
-				}
-			]
-		},
-		{
-			"#": "20",
-			"label": "Auto Turn-On Timer Unit for Relay 3",
-			"description": "Choose between second, minutes, and hours as the unit for Auto Turn-On time for Relay 3.",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 2,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Minutes",
-					"value": 0
-				},
-				{
-					"label": "Seconds",
-					"value": 1
-				},
-				{
-					"label": "Hours",
-					"value": 2
-				}
-			]
-		}
-	],
-	"compat": {
-		// This device improperly reports the state of R2 (endpoint 2) through the root endpoint in a way that also changes the state of R1 (endpoint 1)
-		"preserveRootApplicationCCValueIDs": true
-	}
-}

package/config/devices/0x027a/zen21_0.0-2.9.json

@@ -1,90 +0,0 @@
-{
-	"manufacturer": "Zooz",
-	"manufacturerId": "0x027a",
-	"label": "ZEN21",
-	"description": "Light Switch",
-	"devices": [
-		{
-			"productType": "0xb111",
-			"productId": "0x1e1c"
-		},
-		{
-			"productType": "0xaa00",
-			"productId": "0xaa01",
-			"zwaveAllianceId": 3667
-		}
-	],
-	"firmwareVersion": {
-		"min": "0.0",
-		"max": "2.9"
-	},
-	"paramInformation": [
-		{
-			"#": "1",
-			"label": "Invert Switch",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 2,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Normal Orientation",
-					"value": 0
-				},
-				{
-					"label": "Invert switch",
-					"value": 1
-				},
-				{
-					"label": "Both paddles toggle",
-					"value": 2
-				}
-			]
-		},
-		{
-			"#": "2",
-			"label": "LED Indicator Control",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "LED on when switch off",
-					"value": 0
-				},
-				{
-					"label": "LED on when switch on",
-					"value": 1
-				}
-			]
-		},
-		{
-			"#": "3",
-			"label": "Enable/Disable LED Indicator",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Enable",
-					"value": 0
-				},
-				{
-					"label": "Disable",
-					"value": 1
-				}
-			]
-		}
-	],
-	"metadata": {
-		"inclusion": "1. Initiate inclusion (pairing) in the app (or web interface).\n2. Tap the upper paddle of the switch 3 times.\n3. The LED indicator will blink to signal communication and stay on/off when communication is concluded",
-		"exclusion": "1. Bring your Z-Wave gateway (hub) close to the switch if possible\n2. Put the Z-Wave hub into exclusion mode \n3. Tap the lower paddle on the switch 3 times quickly\n4. Your hub will confirm exclusion and the device will disappear from your controller's device list",
-		"reset": "If your primary controller is missing or inoperable, you may need to reset the device to factory settings. To complete the reset process manually, tap-tap-tap’n’hold the upper paddle for at least 10 seconds. The LED indicator will flash to confirm successful reset.\nNOTE: All previously recorded activity and custom settings will be erased from the device’s memory",
-		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3667/zooz-z-wave-plus-on-off-switch-zen21-ver3.1-manual.pdf"
-	}
-}