@zwave-js/config 12.0.4 → 12.1.0

package/config/devices/0x0159/zmnhbd.json

@@ -24,7 +24,7 @@
 			"maxNodes": 16
 		},
 		"3": {
-			"label": "Q1 switch binary",
+			"label": "Q1 Binary Switch",
 			"maxNodes": 16
 		},
 		"4": {
@@ -36,7 +36,7 @@
 			"maxNodes": 16
 		},
 		"6": {
-			"label": "Q2 switch binary",
+			"label": "Q2 Binary Switch",
 			"maxNodes": 16
 		},
 		"7": {
@@ -52,34 +52,34 @@
 	"paramInformation": [
 		{
 			"#": "1",
-			"label": "Input 1 switch type",
+			"label": "Input 1 Switch Type",
 			"valueSize": 1,
 			"defaultValue": 1,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "mono-stable switch type (push button)",
+					"label": "Mono-Stable switch type (Push button)",
 					"value": 0
 				},
 				{
-					"label": "bi-stable switch type",
+					"label": "Bi-Stable switch type",
 					"value": 1
 				}
 			]
 		},
 		{
 			"#": "2",
-			"label": "Input 2 switch type",
+			"label": "Input 2 Switch Type",
 			"valueSize": 1,
 			"defaultValue": 1,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "mono-stable switch type (push button)",
+					"label": "Mono-Stable switch type (Push button)",
 					"value": 0
 				},
 				{
-					"label": "bi-stable switch type",
+					"label": "Bi-Stable switch type",
 					"value": 1
 				}
 			]
@@ -93,26 +93,26 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "ALL ON is not active ALL OFF is not active",
+					"label": "All on is not active all off is not active",
 					"value": 0
 				},
 				{
-					"label": "ALL ON is not active ALL OFF active",
+					"label": "All on is not active all off active",
 					"value": 1
 				},
 				{
-					"label": "ALL ON active ALL OFF is not active",
+					"label": "All on active all off is not active",
 					"value": 2
 				},
 				{
-					"label": "ALL ON active, ALL OFF active",
+					"label": "All on active, all off active",
 					"value": 255
 				}
 			]
 		},
 		{
 			"#": "11",
-			"label": "Automatic turning off output Q1 after set time",
+			"label": "Automatic Turning Off Output Q1 After Set Time",
 			"description": "When relay Q1 is ON it goes automatically OFF after defined time",
 			"valueSize": 2,
 			"minValue": 0,
@@ -121,7 +121,7 @@
 		},
 		{
 			"#": "12",
-			"label": "Automatic turning on output Q1 after set time",
+			"label": "Automatic Turning on Output Q1 After Set Time",
 			"description": "When relay Q1 is OFF it goes automatically ON after defined time",
 			"valueSize": 2,
 			"minValue": 0,
@@ -130,7 +130,7 @@
 		},
 		{
 			"#": "13",
-			"label": "Automatic turning off relay Q2 after set time",
+			"label": "Automatic Turning Off Relay Q2 After Set Time",
 			"description": "When relay Q2 is ON it goes automatically OFF after defined time",
 			"valueSize": 2,
 			"minValue": 0,
@@ -139,7 +139,7 @@
 		},
 		{
 			"#": "14",
-			"label": "Automatic turning on output Q2 after set time",
+			"label": "Automatic Turning on Output Q2 After Set Time",
 			"description": "When relay Q2 is OFF it goes automatically ON after defined time",
 			"valueSize": 2,
 			"minValue": 0,
@@ -148,7 +148,7 @@
 		},
 		{
 			"#": "15",
-			"label": "Seconds or milliseconds selection",
+			"label": "Seconds or Milliseconds Selection",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 255,
@@ -161,7 +161,7 @@
 		},
 		{
 			"#": "40",
-			"label": "Power reporting in Watts for Q1",
+			"label": "Power Reporting in Watts for Q1",
 			"valueSize": 1,
 			"unit": "%",
 			"minValue": 0,
@@ -170,7 +170,7 @@
 		},
 		{
 			"#": "41",
-			"label": "Power reporting in Watts for Q2",
+			"label": "Power Reporting in Watts for Q2",
 			"valueSize": 1,
 			"unit": "%",
 			"minValue": 0,
@@ -179,7 +179,7 @@
 		},
 		{
 			"#": "42",
-			"label": "Power reporting time interval for Q1",
+			"label": "Power Reporting Time Interval for Q1",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 32535,
@@ -187,7 +187,7 @@
 		},
 		{
 			"#": "43",
-			"label": "Power reporting time interval for Q2",
+			"label": "Power Reporting Time Interval for Q2",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 32535,
@@ -195,7 +195,7 @@
 		},
 		{
 			"#": "63",
-			"label": "Output Q1 Switch selection",
+			"label": "Output Q1 Switch Selection",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,
@@ -212,7 +212,7 @@
 		},
 		{
 			"#": "64",
-			"label": "Output Q2 Switch selection",
+			"label": "Output Q2 Switch Selection",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,
@@ -229,7 +229,7 @@
 		},
 		{
 			"#": "110",
-			"label": "Temperature sensor offset",
+			"label": "Temperature Sensor Offset",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 32536,
@@ -237,7 +237,7 @@
 		},
 		{
 			"#": "120",
-			"label": "Digital temperature sensor reporting",
+			"label": "Digital Temperature Sensor Reporting",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 127,

package/config/devices/0x0159/zmnhca.json

@@ -50,26 +50,26 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "ALL ON is not active ALL OFF is not active",
+					"label": "All on is not active all off is not active",
 					"value": 0
 				},
 				{
-					"label": "ALL ON is not active ALL OFF active",
+					"label": "All on is not active all off active",
 					"value": 1
 				},
 				{
-					"label": "ALL ON is inactive ALL OFF is inactive",
+					"label": "All on is inactive all off is inactive",
 					"value": 2
 				},
 				{
-					"label": "ALL ON active, ALL OFF active",
+					"label": "All on active, all off active",
 					"value": 255
 				}
 			]
 		},
 		{
 			"#": "40",
-			"label": "Reporting in Watts on power change for Q1 or Q2",
+			"label": "Reporting in Watts on Power Change for Q1 or Q2",
 			"description": "Power consumption change threshold for sending updates",
 			"valueSize": 1,
 			"minValue": 1,
@@ -78,7 +78,7 @@
 		},
 		{
 			"#": "42",
-			"label": "Reporting in Watts by time interval for Q1 or Q2",
+			"label": "Reporting in Watts by Time Interval for Q1 or Q2",
 			"valueSize": 2,
 			"unit": "W",
 			"minValue": 0,
@@ -87,7 +87,7 @@
 		},
 		{
 			"#": "71",
-			"label": "Operating modes",
+			"label": "Operating Modes",
 			"description": "Operation Mode (Shutter or Venetian)",
 			"valueSize": 1,
 			"defaultValue": 0,
@@ -98,14 +98,14 @@
 					"value": 0
 				},
 				{
-					"label": "Venetian mode (up/down and slate rotation)",
+					"label": "Venetian mode (Up/Down and slate rotation)",
 					"value": 1
 				}
 			]
 		},
 		{
 			"#": "72",
-			"label": "Slats tilting full turn time",
+			"label": "Slats Tilting Full Turn Time",
 			"description": "Slat full turn time in tenths of a second.",
 			"valueSize": 2,
 			"minValue": 0,
@@ -114,28 +114,28 @@
 		},
 		{
 			"#": "73",
-			"label": "Slats position",
+			"label": "Slats Position",
 			"valueSize": 1,
 			"defaultValue": 2,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "previously set position only in case of UI control",
+					"label": "Previously set position only in case of UI control",
 					"value": 0
 				},
 				{
-					"label": "position in case of UI control, push",
+					"label": "Position in case of UI control, push",
 					"value": 1
 				},
 				{
-					"label": "position in case of UI control, push button",
+					"label": "Position in case of UI control, push button",
 					"value": 2
 				}
 			]
 		},
 		{
 			"#": "74",
-			"label": "Motor moving up/down time",
+			"label": "Motor Moving Up/down Time",
 			"description": "Shutter motor moving time of complete opening or complete closing",
 			"valueSize": 2,
 			"minValue": 0,
@@ -144,7 +144,7 @@
 		},
 		{
 			"#": "76",
-			"label": "Motor operation detection",
+			"label": "Motor Operation Detection",
 			"description": "Power threshold",
 			"valueSize": 1,
 			"minValue": 0,
@@ -153,7 +153,7 @@
 		},
 		{
 			"#": "78",
-			"label": "Forced Shutter calibration",
+			"label": "Forced Shutter Calibration",
 			"description": "0 to 1 a Shutter enters the calibration mode",
 			"valueSize": 1,
 			"minValue": 0,
@@ -162,24 +162,13 @@
 		},
 		{
 			"#": "80",
-			"label": "Reporting to controller",
-			"valueSize": 1,
-			"defaultValue": 1,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "reporting to controller is disabled",
-					"value": 0
-				},
-				{
-					"label": "reporting to controller is enabled",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Reporting to Controller",
+			"defaultValue": 1
 		},
 		{
 			"#": "85",
-			"label": "Power consumption max delay time",
+			"label": "Power Consumption Max Delay Time",
 			"description": "max time before motor power consumption is read",
 			"valueSize": 1,
 			"minValue": 0,
@@ -188,7 +177,7 @@
 		},
 		{
 			"#": "90",
-			"label": "Relay delay time",
+			"label": "Relay Delay Time",
 			"description": "This parameter defines the time delay between output relay switching",
 			"valueSize": 1,
 			"minValue": 1,

package/config/devices/0x0159/zmnhcd.json

@@ -23,26 +23,26 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "ALL ON is not active ALL OFF is not active",
+					"label": "All on is not active all off is not active",
 					"value": 0
 				},
 				{
-					"label": "ALL ON is not active ALL OFF active",
+					"label": "All on is not active all off active",
 					"value": 1
 				},
 				{
-					"label": "ALL ON is not active ALL OFF is not active",
+					"label": "All on is not active all off is not active",
 					"value": 2
 				},
 				{
-					"label": "ALL ON active, ALL OFF active",
+					"label": "All on active, all off active",
 					"value": 255
 				}
 			]
 		},
 		{
 			"#": "40",
-			"label": "Power reporting in watts on power change",
+			"label": "Power Reporting in Watts on Power Change",
 			"description": "Power consumption change threshold for sending updates",
 			"valueSize": 1,
 			"minValue": 0,
@@ -51,7 +51,7 @@
 		},
 		{
 			"#": "42",
-			"label": "Power reporting in Watts by time interval",
+			"label": "Power Reporting in Watts by Time Interval",
 			"valueSize": 2,
 			"unit": "seconds",
 			"minValue": 0,
@@ -60,7 +60,7 @@
 		},
 		{
 			"#": "71",
-			"label": "Operating modes",
+			"label": "Operating Modes",
 			"description": "Operation Mode (Shutter or Venetian)",
 			"valueSize": 1,
 			"defaultValue": 0,
@@ -71,42 +71,42 @@
 					"value": 0
 				},
 				{
-					"label": "Venetian mode (up/down and slate rotation)",
+					"label": "Venetian mode (Up/Down and slate rotation)",
 					"value": 1
 				}
 			]
 		},
 		{
 			"#": "72",
-			"label": "Slats tilting full turn time",
+			"label": "Slats Tilting Full Turn Time",
 			"description": "Slat full turn time in tenths of a second.",
 			"valueSize": 2,
-			"unit": "0.1 second",
+			"unit": "0.1 seconds",
 			"minValue": 0,
 			"maxValue": 32767,
 			"defaultValue": 150
 		},
 		{
 			"#": "73",
-			"label": "Slats position",
+			"label": "Slats Position",
 			"description": "Slats position after up/down movement.",
 			"valueSize": 1,
 			"defaultValue": 1,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "ret. to previous position for Z-wave control only",
+					"label": "Ret. To previous position for Z-Wave control only",
 					"value": 0
 				},
 				{
-					"label": "return to previous position in all cases",
+					"label": "Return to previous position in all cases",
 					"value": 1
 				}
 			]
 		},
 		{
 			"#": "74",
-			"label": "Motor moving up/down time",
+			"label": "Motor Moving Up/down Time",
 			"description": "Shutter motor moving time of complete opening or complete closing",
 			"valueSize": 2,
 			"minValue": 0,
@@ -115,7 +115,7 @@
 		},
 		{
 			"#": "76",
-			"label": "Motor operation detection",
+			"label": "Motor Operation Detection",
 			"description": "Power threshold to be interpreted when motor reach the limit switch",
 			"valueSize": 1,
 			"minValue": 0,
@@ -124,7 +124,7 @@
 		},
 		{
 			"#": "78",
-			"label": "Forced Shutter calibration",
+			"label": "Forced Shutter Calibration",
 			"description": "Enters calibration mode if set to 1",
 			"valueSize": 1,
 			"defaultValue": 0,
@@ -135,32 +135,21 @@
 					"value": 0
 				},
 				{
-					"label": "Start Calibration Process",
+					"label": "Start calibration process",
 					"value": 1
 				}
 			]
 		},
 		{
 			"#": "80",
+			"$import": "~/templates/master_template.json#base_enable_disable",
 			"label": "Reporting to Controller",
 			"description": "Defines if reporting regarding power level, etc is reported to controller.",
-			"valueSize": 1,
-			"defaultValue": 1,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Reporting to Controller Disabled",
-					"value": 0
-				},
-				{
-					"label": "Reporting to Controller Enabled",
-					"value": 1
-				}
-			]
+			"defaultValue": 1
 		},
 		{
 			"#": "85",
-			"label": "Power consumption max delay time",
+			"label": "Power Consumption Max Delay Time",
 			"description": "Time delay for detecting motor errors",
 			"valueSize": 1,
 			"minValue": 0,
@@ -170,7 +159,7 @@
 		{
 			"#": "86",
 			"$if": "firmwareVersion >= 4.1",
-			"label": "Power consumption at limit switch delay time",
+			"label": "Power Consumption At Limit Switch Delay Time",
 			"description": "Sets the time delay for detecting limit switches",
 			"valueSize": 1,
 			"minValue": 3,
@@ -179,17 +168,17 @@
 		},
 		{
 			"#": "90",
-			"label": "Relay delay time",
+			"label": "Relay Delay Time",
 			"description": "Defines the minimum time delay between next motor movement",
 			"valueSize": 1,
-			"unit": "milliseconds",
+			"unit": "ms",
 			"minValue": 1,
 			"maxValue": 30,
 			"defaultValue": 5
 		},
 		{
 			"#": "110",
-			"label": "Temperature sensor offset settings",
+			"label": "Temperature Sensor Offset Settings",
 			"description": "Adds or removes an offset from the measured temperature.",
 			"valueSize": 2,
 			"minValue": 1,
@@ -198,7 +187,7 @@
 		},
 		{
 			"#": "120",
-			"label": "Digital temperature sensor reporting",
+			"label": "Digital Temperature Sensor Reporting",
 			"description": "Threshold for sending temperature change reports",
 			"valueSize": 1,
 			"minValue": 0,