@zwave-js/config 12.0.4 → 12.1.0

package/config/devices/0x008b/xl624.json

@@ -26,7 +26,7 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "NONE",
+					"label": "None",
 					"value": 0
 				},
 				{
@@ -34,6 +34,7 @@
 					"value": 1
 				},
 				{
+					// eslint-disable-next-line @zwave-js/consistent-config-string-case
 					"label": "HP",
 					"value": 2
 				}
@@ -62,6 +63,7 @@
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,
+			/* eslint-disable @zwave-js/consistent-config-string-case */
 			"options": [
 				{
 					"label": "w/Cool",
@@ -72,6 +74,7 @@
 					"value": 1
 				}
 			]
+			/* eslint-enable @zwave-js/consistent-config-string-case */
 		},
 		{
 			"#": "4",
@@ -102,11 +105,11 @@
 					"value": 0
 				},
 				{
-					"label": "1 Stage",
+					"label": "1 stage",
 					"value": 1
 				},
 				{
-					"label": "2 Stage",
+					"label": "2 stage",
 					"value": 2
 				}
 			]
@@ -221,7 +224,7 @@
 					"value": 0
 				},
 				{
-					"label": "Run Schedule",
+					"label": "Run schedule",
 					"value": 1
 				}
 			]
@@ -245,37 +248,13 @@
 		},
 		{
 			"#": "78",
-			"label": "Aux Heat Enable",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "no aux heat",
-					"value": 0
-				},
-				{
-					"label": "aux heat enabled",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Aux Heat"
 		},
 		{
 			"#": "79",
-			"label": "2nd Stage Cool Enable",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "no 2nd stage cool",
-					"value": 0
-				},
-				{
-					"label": "2nd stage cool",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "2nd Stage Cool"
 		},
 		{
 			"#": "141",

package/config/devices/0x008b/zw111.json

@@ -41,52 +41,23 @@
 		},
 		{
 			"#": "4",
-			"label": "Overheat protection",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Overheat Protection"
 		},
 		{
 			"#": "20",
-			"label": "Configure the output status after re-power on it",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Last status",
-					"value": 0
-				},
-				{
-					"label": "Always on",
-					"value": 1
-				},
-				{
-					"label": "Always off",
-					"value": 2
-				}
-			]
+			"$import": "~/templates/master_template.json#state_after_power_failure_prev_on_off"
 		},
 		{
 			"#": "80",
-			"label": "Group 1 notification",
+			"label": "Group 1 Notification",
 			"description": "Set notification sent to associated nodes (group 1)",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Send Nothing",
+					"label": "Send nothing",
 					"value": 0
 				},
 				{
@@ -94,11 +65,11 @@
 					"value": 1
 				},
 				{
-					"label": "Send Basic CC report",
+					"label": "Send Basic Report",
 					"value": 2
 				},
 				{
-					"label": "Send Multilevel Switch report",
+					"label": "Send Multilevel Switch Report",
 					"value": 3
 				},
 				{
@@ -109,43 +80,43 @@
 		},
 		{
 			"#": "81",
-			"label": "Group 3 notification",
+			"label": "Group 3 Notification",
 			"description": "Set notification sent to associated nodes (group 3)",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Send Nothing",
+					"label": "Send nothing",
 					"value": 0
 				},
 				{
-					"label": "Send Basic Set CC",
+					"label": "Send Basic Set",
 					"value": 1
 				}
 			]
 		},
 		{
 			"#": "82",
-			"label": "Group 4 notification",
+			"label": "Group 4 Notification",
 			"description": "Set notification sent to associated nodes (group 4)",
 			"valueSize": 1,
 			"defaultValue": 1,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Send Nothing",
+					"label": "Send nothing",
 					"value": 0
 				},
 				{
-					"label": "Send Basic Set CC",
+					"label": "Send Basic Set",
 					"value": 1
 				}
 			]
 		},
 		{
 			"#": "85",
-			"label": "Set appointment 1",
+			"label": "Set Appointment 1",
 			"valueSize": 4,
 			"minValue": 0,
 			"maxValue": 16843197,
@@ -153,7 +124,7 @@
 		},
 		{
 			"#": "86",
-			"label": "Set appointment 2",
+			"label": "Set Appointment 2",
 			"valueSize": 4,
 			"minValue": 0,
 			"maxValue": 16843197,
@@ -161,25 +132,12 @@
 		},
 		{
 			"#": "90",
-			"label": "(En/dis)able 91 and 92",
-			"description": "Enables/disables parameter 91 and 92",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Enable/Disable Parameters 91 and 92"
 		},
 		{
 			"#": "91",
-			"label": "Set the threshold value of wattage",
+			"label": "Set the Threshold Value of Wattage",
 			"description": "Threshold change in wattage (in terms of wattage) to induce an automatic report",
 			"valueSize": 2,
 			"minValue": 0,
@@ -189,7 +147,7 @@
 		},
 		{
 			"#": "92",
-			"label": "Set the threshold value of percent power",
+			"label": "Set the Threshold Value of Percent Power",
 			"description": "Threshold change in wattage (in terms of percentage)",
 			"valueSize": 1,
 			"unit": "W",
@@ -199,7 +157,7 @@
 		},
 		{
 			"#": "100",
-			"label": "Reset 101-103 to default",
+			"label": "Reset 101-103 to Default",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 0,
@@ -214,7 +172,7 @@
 		},
 		{
 			"#": "101",
-			"label": "Set group 1 reports",
+			"label": "Set Group 1 Reports",
 			"description": "To set which reports need to be sent in Report group 1",
 			"valueSize": 1,
 			"minValue": 0,
@@ -223,7 +181,7 @@
 		},
 		{
 			"#": "102",
-			"label": "Set group 2 reports",
+			"label": "Set Group 2 Reports",
 			"description": "To set which reports need to be sent in Report group 2",
 			"valueSize": 1,
 			"minValue": 0,
@@ -256,7 +214,7 @@
 		},
 		{
 			"#": "111",
-			"label": "Automatic report interval group 1",
+			"label": "Automatic Report Interval Group 1",
 			"description": "Set the interval of automatic report for Report group 1",
 			"valueSize": 4,
 			"minValue": 1,
@@ -265,7 +223,7 @@
 		},
 		{
 			"#": "112",
-			"label": "Automatic report interval group 2",
+			"label": "Automatic Report Interval Group 2",
 			"description": "Set the interval of automatic report for Report group 2",
 			"valueSize": 4,
 			"minValue": 1,
@@ -274,7 +232,7 @@
 		},
 		{
 			"#": "113",
-			"label": "Automatic report interval group 3",
+			"label": "Automatic Report Interval Group 3",
 			"description": "Set the interval of automatic report for Report group 3",
 			"valueSize": 4,
 			"minValue": 0,
@@ -283,7 +241,7 @@
 		},
 		{
 			"#": "120",
-			"label": "Configure the external switch mode for S1",
+			"label": "Configure the External Switch Mode for S1",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"writeOnly": true,
@@ -294,7 +252,7 @@
 					"value": 0
 				},
 				{
-					"label": "2-state switch mode",
+					"label": "2-State switch mode",
 					"value": 1
 				},
 				{
@@ -313,7 +271,7 @@
 		},
 		{
 			"#": "121",
-			"label": "Configure the external switch mode for S2",
+			"label": "Configure the External Switch Mode for S2",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,
@@ -323,7 +281,7 @@
 					"value": 0
 				},
 				{
-					"label": "2-state switch mode",
+					"label": "2-State switch mode",
 					"value": 1
 				},
 				{
@@ -342,35 +300,35 @@
 		},
 		{
 			"#": "122",
-			"label": "Get the state of touch panel port",
+			"label": "Get the State of Touch Panel Port",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "the touch panel is not connected.",
+					"label": "The touch panel is not connected",
 					"value": 0
 				},
 				{
-					"label": "the touch panel is connected",
+					"label": "The touch panel is connected",
 					"value": 5
 				}
 			]
 		},
 		{
 			"#": "123",
-			"label": "Destination for switch S1",
+			"label": "Destination for Switch S1",
 			"description": "Set the control destination for external switch S1",
 			"valueSize": 1,
 			"defaultValue": 3,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "control the output loads of itself",
+					"label": "Control the output loads of itself",
 					"value": 1
 				},
 				{
-					"label": "control the other nodes",
+					"label": "Control the other nodes",
 					"value": 2
 				},
 				{
@@ -381,17 +339,17 @@
 		},
 		{
 			"#": "124",
-			"label": "Set the control destination for external switch S2",
+			"label": "Set the Control Destination for External Switch S2",
 			"valueSize": 1,
 			"defaultValue": 3,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "control the output loads of itself",
+					"label": "Control the output loads of itself",
 					"value": 1
 				},
 				{
-					"label": "control the other nodes",
+					"label": "Control the other nodes",
 					"value": 2
 				},
 				{
@@ -402,7 +360,7 @@
 		},
 		{
 			"#": "125",
-			"label": "Set the default dimming rate",
+			"label": "Set the Default Dimming Rate",
 			"description": "The value range is 1 to 255 seconds",
 			"valueSize": 1,
 			"minValue": 1,
@@ -412,7 +370,7 @@
 		},
 		{
 			"#": "128",
-			"label": "Get the current working mode",
+			"label": "Get the Current Working Mode",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,
@@ -422,18 +380,18 @@
 					"value": 0
 				},
 				{
-					"label": "2-wire mode",
+					"label": "2-Wire mode",
 					"value": 1
 				},
 				{
-					"label": "3-wire mode",
+					"label": "3-Wire mode",
 					"value": 2
 				}
 			]
 		},
 		{
 			"#": "129",
-			"label": "Set the dimming principle",
+			"label": "Set the Dimming Principle",
 			"valueSize": 1,
 			"defaultValue": 1,
 			"allowManualEntry": false,
@@ -450,7 +408,7 @@
 		},
 		{
 			"#": "130",
-			"label": "Type of load",
+			"label": "Type of Load",
 			"description": "To get what type of load the Dimmer is connected to.",
 			"valueSize": 1,
 			"defaultValue": 0,
@@ -476,7 +434,7 @@
 		},
 		{
 			"#": "131",
-			"label": "Set the minimum brightness",
+			"label": "Set the Minimum Brightness",
 			"description": "Set the min brightness level that the load can reach to",
 			"valueSize": 1,
 			"minValue": 0,
@@ -485,7 +443,7 @@
 		},
 		{
 			"#": "132",
-			"label": "Set the maximum brightness level",
+			"label": "Set the Maximum Brightness Level",
 			"description": "Set the max brightness level that the load can reach to",
 			"valueSize": 1,
 			"minValue": 0,
@@ -494,7 +452,7 @@
 		},
 		{
 			"#": "249",
-			"label": "Set the recognition way of load",
+			"label": "Set the Recognition Way of Load",
 			"valueSize": 1,
 			"defaultValue": 2,
 			"allowManualEntry": false,
@@ -515,7 +473,7 @@
 		},
 		{
 			"#": "252",
-			"label": "Lock/unlock configuration parameters",
+			"label": "Lock/unlock Configuration Parameters",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,
@@ -538,11 +496,11 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "factory default",
+					"label": "Factory default",
 					"value": 0
 				},
 				{
-					"label": "factory default and remove",
+					"label": "Factory default and remove",
 					"value": 1431655765
 				}
 			]

package/config/devices/0x0090/hc620.json

@@ -129,11 +129,11 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Normal Operation",
+					"label": "Normal operation",
 					"value": 0
 				},
 				{
-					"label": "Reset to Factory Defaults",
+					"label": "Reset to factory defaults",
 					"value": 1
 				},
 				{

package/config/devices/0x0090/smartcode_888.json

@@ -116,19 +116,19 @@
 					"value": 30
 				},
 				{
-					"label": "60 Seconds",
+					"label": "60 seconds",
 					"value": 60
 				},
 				{
-					"label": "90 Seconds",
+					"label": "90 seconds",
 					"value": 90
 				},
 				{
-					"label": "120 Seconds",
+					"label": "120 seconds",
 					"value": 120
 				},
 				{
-					"label": "180 Seconds",
+					"label": "180 seconds",
 					"value": 180
 				}
 			]

package/config/devices/0x0091/electricity_meter.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Kamstrup A/S",
 	"manufacturerId": "0x0091",
 	"label": "electricity_meter",
-	"description": "Electricity meters",
+	"description": "Electricity Meters",
 	"devices": [
 		{
 			"productType": "0x0001",

package/config/devices/0x0094/adc-200h-ev.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Alarm.com",
 	"manufacturerId": "0x0094",
 	"label": "ADC-200H-EV",
-	"description": "Alarm.com Interlogix Simon XT/i Radio Module",
+	"description": "Interlogix Simon XT/i Radio Module",
 	"devices": [
 		{
 			"productType": "0x0001",

package/config/devices/0x0094/adc-470l.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Alarm.com",
 	"manufacturerId": "0x0094",
 	"label": "ADC-470L",
-	"description": "Alarm.com Rev4.7 Radio Module",
+	"description": "Rev4.7 Radio Module",
 	"devices": [
 		{
 			"productType": "0x000e",

package/config/devices/0x0094/adc-620t.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Alarm.com",
 	"manufacturerId": "0x0094",
 	"label": "ADC-620T",
-	"description": "Alarm.com Module for DSC Panels",
+	"description": "Module for DSC Panels",
 	"devices": [
 		{
 			"productType": "0x000a",

package/config/devices/0x0094/adc-nk-100t.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Alarm.com",
 	"manufacturerId": "0x0094",
 	"label": "ADC-NK-100T",
-	"description": "Alarm.com Hub",
+	"description": "Hub",
 	"devices": [
 		{
 			"productType": "0x0001",

package/config/devices/0x0094/adc-sg130z.json

@@ -22,7 +22,7 @@
 		}
 	},
 	"metadata": {
-		"reset": "This process will clear all nodes from the Alarm.com Z-Wave device’s network, change the Alarm.com ZWave device’s home ID, and reset all Z-Wave settings to their default values. To perform a Z-Wave reset, follow these steps:\n\n1. Log into the Partner Portal at https://alarmadmin.alarm.com/default.aspx and select a customer.\n2. Navigate to the “Equipment” page.\n3. Click the “Z-Wave Devices” tab.\n4. Under the “Advanced Z-Wave Commands” header, click “Remove All Z-Wave Devices.”\n5. Allow 3 minutes for the associated commands to go through and for the Alarm.com Z-Wave\ndevice to act on them.\n\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only if the network primary controller is missing or otherwise inoperable",
+		"reset": "This process will clear all nodes from the Alarm.com Z-Wave device’s network, change the Alarm.com Z-Wave device’s home ID, and reset all Z-Wave settings to their default values. To perform a Z-Wave reset, follow these steps:\n\n1. Log into the Partner Portal at https://alarmadmin.alarm.com/default.aspx and select a customer.\n2. Navigate to the “Equipment” page.\n3. Click the “Z-Wave Devices” tab.\n4. Under the “Advanced Z-Wave Commands” header, click “Remove All Z-Wave Devices.”\n5. Allow 3 minutes for the associated commands to go through and for the Alarm.com Z-Wave\ndevice to act on them.\n\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only if the network primary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4151/Alarm.com-SupplementalZ-WaveDocumentationv6_9_2.pdf"
 	}
 }

package/config/devices/0x0094/adc-zw-ev.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Alarm.com",
 	"manufacturerId": "0x0094",
 	"label": "ADC-ZW-EV",
-	"description": "Alarm.com Z-Wave Snap Device D v1",
+	"description": "Z-Wave Snap Device D v1",
 	"devices": [
 		{
 			"productType": "0x0001",

package/config/devices/0x0095/p313a.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Qees",
 	"manufacturerId": "0x0095",
 	"label": "P313A",
-	"description": "Plug-in Socket Dimmer",
+	"description": "Plug-In Socket Dimmer",
 	"devices": [
 		{
 			"productType": "0x3103",

package/config/devices/0x0095/wall.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Qees",
 	"manufacturerId": "0x0095",
 	"label": "Wall",
-	"description": "Wall mountable mini 4 button remote",
+	"description": "Wall Mountable Mini 4 Button Remote",
 	"devices": [
 		{
 			"productType": "0x0002",