@zwave-js/config 12.0.3 → 12.1.0

package/config/devices/0x0208/hkzw-rgb01.json

@@ -20,68 +20,38 @@
 	"paramInformation": [
 		{
 			"#": "21",
-			"label": "Status after power failure",
-			"description": "Define how the RGB BULB will react after the power supply is back on.",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Memorizes its state",
-					"value": 0
-				},
-				{
-					"label": "ON",
-					"value": 1
-				},
-				{
-					"label": "OFF",
-					"value": 2
-				}
-			]
+			"$import": "~/templates/master_template.json#state_after_power_failure_prev_on_off"
 		},
 		{
 			"#": "24",
-			"label": "Notification when Load status change",
+			"label": "Notification When Load Status Change",
 			"description": "RGB BULB can send notifications to associated device",
 			"valueSize": 1,
 			"defaultValue": 1,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Notifications Disabled",
+					"label": "Notifications disabled",
 					"value": 0
 				},
 				{
-					"label": "Send BASIC REPORT",
+					"label": "Send Basic Report",
 					"value": 1
 				},
 				{
-					"label": "Send BASIC REPORT only without status change",
+					"label": "Send Basic Report only without status change",
 					"value": 2
 				}
 			]
 		},
 		{
 			"#": "51",
-			"label": "Enable/disable the function of using wall switch to turn on/off RGB BULB",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Use Wall Switch to Turn On/off RGB BULB"
 		},
 		{
 			"#": "61",
-			"label": "Advance mode",
+			"label": "Advance Mode",
 			"description": "RGB BULB can blink or cyclic/random change color automatically at set intervals.",
 			"valueSize": 4,
 			"defaultValue": 3072,
@@ -123,7 +93,7 @@
 		},
 		{
 			"#": "255",
-			"label": "Resetting to factory default",
+			"label": "Resetting to Factory Default",
 			"description": "RGB BULB will exclude from the Z-Wave network with this particular command",
 			"valueSize": 4,
 			"minValue": 1,

package/config/devices/0x0208/hkzw-scn01.json

@@ -2,7 +2,7 @@
 	"manufacturer": "HANK Electronics Ltd.",
 	"manufacturerId": "0x0208",
 	"label": "HKZW-SCN01",
-	"description": "One-key Scene Controller",
+	"description": "One-Key Scene Controller",
 	"devices": [
 		{
 			"productType": "0x0200",

package/config/devices/0x0208/hkzw-scn04.json

@@ -2,7 +2,7 @@
 	"manufacturer": "HANK Electronics Ltd.",
 	"manufacturerId": "0x0208",
 	"label": "SCN04",
-	"description": "Four-key Scene Controller",
+	"description": "Four-Key Scene Controller",
 	"devices": [
 		{
 			"productType": "0x0200",
@@ -20,7 +20,7 @@
 	"paramInformation": [
 		{
 			"#": "254",
-			"label": "Enable configuration",
+			"label": "Enable Configuration",
 			"description": "Lock/unlock all configuration parameters.",
 			"valueSize": 1,
 			"defaultValue": 0,

package/config/devices/0x0208/hkzw-so01.json

@@ -2,7 +2,7 @@
 	"manufacturer": "HANK Electronics Ltd.",
 	"manufacturerId": "0x0208",
 	"label": "HKZW-SO01",
-	"description": "Smart Plug with two USB ports",
+	"description": "Smart Plug with Two USB Ports",
 	"devices": [
 		{
 			"productType": "0x0101",
@@ -47,7 +47,7 @@
 		},
 		{
 			"#": "151",
-			"label": "Threshold of power report",
+			"label": "Threshold of Power Report",
 			"description": "Power Threshold at which to send meter report",
 			"valueSize": 2,
 			"unit": "W",
@@ -71,7 +71,7 @@
 			"label": "Power Report Frequency",
 			"description": "The interval of sending power report to association device (Group Lifeline).",
 			"valueSize": 4,
-			"unit": "Seconds",
+			"unit": "seconds",
 			"minValue": 5,
 			"maxValue": 2678400,
 			"defaultValue": 30
@@ -81,7 +81,7 @@
 			"label": "Energy Report Frequency",
 			"description": "The interval of sending energy report to association device (Group Lifeline).",
 			"valueSize": 4,
-			"unit": "Seconds",
+			"unit": "seconds",
 			"minValue": 5,
 			"maxValue": 2678400,
 			"defaultValue": 300
@@ -91,7 +91,7 @@
 			"label": "Voltage Report Frequency",
 			"description": "The interval of sending voltage report to association device (Group Lifeline)",
 			"valueSize": 4,
-			"unit": "Seconds",
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 2678400,
 			"defaultValue": 0
@@ -101,7 +101,7 @@
 			"label": "Electricity Report Frequency",
 			"description": "Interval for sending electricity report.",
 			"valueSize": 4,
-			"unit": "Seconds",
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 2678400,
 			"defaultValue": 0

package/config/devices/0x0208/hkzw-so05.json

@@ -16,22 +16,10 @@
 	"paramInformation": [
 		{
 			"#": "20",
+			"$import": "~/templates/master_template.json#base_enable_disable",
 			"label": "Overload Protection",
 			"description": "Turn off if the load power exceeds 0.5A for more than 5s.",
-			"valueSize": 1,
-			"defaultValue": 1,
-			"writeOnly": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Function Disabled",
-					"value": 0
-				},
-				{
-					"label": "Function enabled",
-					"value": 1
-				}
-			]
+			"defaultValue": 1
 		},
 		{
 			"#": "21",
@@ -68,11 +56,11 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Work in indicator mode.",
+					"label": "Work in indicator mode",
 					"value": 0
 				},
 				{
-					"label": "Indicate for 5 seconds after load has changed.",
+					"label": "Indicate for 5 seconds after load has changed",
 					"value": 1
 				}
 			]
@@ -104,7 +92,7 @@
 			"label": "Power Report Frequence",
 			"description": "The interval of sending power report to association device.",
 			"valueSize": 4,
-			"unit": "Seconds",
+			"unit": "seconds",
 			"minValue": 5,
 			"maxValue": 2678400,
 			"defaultValue": 30
@@ -114,7 +102,7 @@
 			"label": "Energy Report Frequence",
 			"description": "The interval of sending energy report to association device.",
 			"valueSize": 4,
-			"unit": "Seconds",
+			"unit": "seconds",
 			"minValue": 5,
 			"maxValue": 2678400,
 			"defaultValue": 300
@@ -124,7 +112,7 @@
 			"label": "Voltage Report Frequency",
 			"description": "The interval of sending voltage report to association device.",
 			"valueSize": 4,
-			"unit": "Seconds",
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 2678400,
 			"defaultValue": 0
@@ -134,7 +122,7 @@
 			"label": "Electricity Report Frequency",
 			"description": "The interval of sending electricity report to association device.",
 			"valueSize": 4,
-			"unit": "Seconds",
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 2678400,
 			"defaultValue": 0

package/config/devices/0x0208/hkzw-so08.json

@@ -0,0 +1,184 @@
+{
+	"manufacturer": "Hank",
+	"manufacturerId": "0x0208",
+	"label": "HKZW-SO08",
+	"description": "Smart Plug",
+	"devices": [
+		{
+			"productType": "0x0100",
+			"productId": "0x0019"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "20",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Overload Protection",
+			"description": "If current exceeds 11.5A over 5 seconds, relay will turn off.",
+			"defaultValue": 1
+		},
+		{
+			"#": "21",
+			"$import": "~/templates/master_template.json#state_after_power_failure_prev_on_off"
+		},
+		{
+			"#": "24",
+			"label": "Send Basic Report on State Change",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 2,
+			"defaultValue": 1,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				},
+				{
+					"label": "Enabled",
+					"value": 1
+				},
+				{
+					"label": "Only when controlled locally",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "27",
+			"label": "Indicator Mode",
+			"valueSize": 1,
+			"defaultValue": 0,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "LED on for 5 seconds, then off",
+					"value": 0
+				},
+				{
+					"label": "On when load is on",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "151",
+			"label": "Power Change Report Threshold",
+			"valueSize": 2,
+			"unit": "W",
+			"minValue": 0,
+			"maxValue": 200,
+			"defaultValue": 50,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "152",
+			"$import": "~/templates/master_template.json#base_0-100_nounit",
+			"label": "Relative Power Change Report Threshold",
+			"unit": "%",
+			"defaultValue": 10,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "171",
+			"label": "Power (W) Report Interval",
+			"description": "Minimum value 3600, if not disabled",
+			"valueSize": 4,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 2678400,
+			"defaultValue": 3600,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "172",
+			"label": "Energy (kWh) Report Interval",
+			"description": "Minimum value 3600, if not disabled",
+			"valueSize": 4,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 2678400,
+			"defaultValue": 7200,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "173",
+			"label": "Voltage (V) Report Interval",
+			"description": "Minimum value 3600, if not disabled",
+			"valueSize": 4,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 2678400,
+			"defaultValue": 0,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "174",
+			"label": "Current (A) Report Interval",
+			"description": "Minimum value 3600, if not disabled",
+			"valueSize": 4,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 2678400,
+			"defaultValue": 0,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "254",
+			"label": "Lock Configuration",
+			"valueSize": 1,
+			"defaultValue": 0,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Unlocked",
+					"value": 0
+				},
+				{
+					"label": "Locked",
+					"value": 1
+				}
+			]
+		}
+	]
+}

package/config/devices/0x0208/hkzw_fld01.json

@@ -38,7 +38,7 @@
 		},
 		{
 			"#": "15",
-			"label": "value of the Basic Set",
+			"label": "Value of the Basic Set",
 			"description": "The flood sensor can send BASIC SET command to nodes associated",
 			"valueSize": 1,
 			"defaultValue": 0,
@@ -109,8 +109,8 @@
 		},
 		{
 			"#": "20",
-			"label": "Set the high temperature alarm trigger value",
-			"description": "Available setting(US):-67°c to -257°c",
+			"label": "Set the High Temperature Alarm Trigger Value",
+			"description": "Available setting(US):-67 °C to -257 °C",
 			"valueSize": 2,
 			"minValue": -670,
 			"maxValue": 2570,
@@ -136,8 +136,8 @@
 		},
 		{
 			"#": "22",
-			"label": "Set the low temperature alarm trigger value",
-			"description": "Available setting(US):-67°c to -257°c",
+			"label": "Set the Low Temperature Alarm Trigger Value",
+			"description": "Available setting(US):-67 °C to -257 °C",
 			"valueSize": 2,
 			"minValue": -670,
 			"maxValue": 2570,
@@ -163,7 +163,7 @@
 		},
 		{
 			"#": "32",
-			"label": "Level of low battery",
+			"label": "Level of Low Battery",
 			"description": "This parameter defines a battery level as the \"low battery\"",
 			"valueSize": 1,
 			"minValue": 10,

package/config/devices/0x0208/hkzw_ms01.json

@@ -16,77 +16,32 @@
 	"paramInformation": [
 		{
 			"#": "12",
-			"label": "Motion Sensor`s Sensitivity",
+			"label": "Motion Sensor Sensitivity",
 			"description": "The higher the value,the more sensitive the PIR sensor",
 			"valueSize": 1,
-			"defaultValue": 8,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Sensitivity 1",
-					"value": 1
-				},
-				{
-					"label": "Sensitivity 2",
-					"value": 2
-				},
-				{
-					"label": "Sensitivity 3",
-					"value": 3
-				},
-				{
-					"label": "Sensitivity 4",
-					"value": 4
-				},
-				{
-					"label": "Sensitivity 5",
-					"value": 5
-				},
-				{
-					"label": "Sensitivity 6",
-					"value": 6
-				},
-				{
-					"label": "Sensitivity 7",
-					"value": 7
-				},
-				{
-					"label": "Sensitivity 8",
-					"value": 8
-				}
-			]
+			"minValue": 1,
+			"maxValue": 8,
+			"defaultValue": 8
 		},
 		{
 			"#": "14",
-			"label": "Enable/Disable Basic Set Command",
-			"description": "The motion Sensor can reverse its value of BASIC SET when motion is triggered",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Basic Set Command",
+			"description": "The motion Sensor can reverse its value of BASIC SET when motion is triggered"
 		},
 		{
 			"#": "15",
-			"label": "value of basic set command",
+			"label": "Value of Basic Set Command",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "send off",
+					"label": "Send off",
 					"value": 0
 				},
 				{
-					"label": "send on",
+					"label": "Send on",
 					"value": 1
 				}
 			]

package/config/devices/0x0208/hkzw_ms02.json

@@ -24,68 +24,22 @@
 	"paramInformation": [
 		{
 			"#": "12",
-			"label": "Motion Sensor`s Sensitivity",
+			"label": "Motion Sensor Sensitivity",
 			"description": "The higher the value,the more sensitive the PIR sensor",
 			"valueSize": 1,
 			"minValue": 1,
 			"maxValue": 8,
-			"defaultValue": 8,
-			"options": [
-				{
-					"label": "Sensitivity 1 (min)",
-					"value": 1
-				},
-				{
-					"label": "Sensitivity 2",
-					"value": 2
-				},
-				{
-					"label": "Sensitivity 3",
-					"value": 3
-				},
-				{
-					"label": "Sensitivity 4",
-					"value": 4
-				},
-				{
-					"label": "Sensitivity 5",
-					"value": 5
-				},
-				{
-					"label": "Sensitivity 6",
-					"value": 6
-				},
-				{
-					"label": "Sensitivity 7",
-					"value": 7
-				},
-				{
-					"label": "Sensitivity 8 (max)",
-					"value": 8
-				}
-			]
+			"defaultValue": 8
 		},
 		{
 			"#": "14",
-			"label": "Enable/Disable Basic Set Command",
-			"description": "The motion Sensor can reverse its value of BASIC SET when motion is triggered",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Basic Set Command",
+			"description": "The motion Sensor can reverse its value of BASIC SET when motion is triggered"
 		},
 		{
 			"#": "15",
-			"label": "value of basic set command",
+			"label": "Value of Basic Set Command",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,
@@ -102,20 +56,8 @@
 		},
 		{
 			"#": "17",
-			"label": "enable/disable shock alarm",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Shock Alarm"
 		},
 		{
 			"#": "18",
@@ -130,7 +72,7 @@
 		},
 		{
 			"#": "32",
-			"label": "Level of low battery",
+			"label": "Level of Low Battery",
 			"description": "Define a battery level ad the \"low battery\"",
 			"valueSize": 1,
 			"minValue": 10,

package/config/devices/0x0208/hkzw_so03.json

@@ -62,7 +62,7 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Always On",
+					"label": "Always on",
 					"value": 0
 				},
 				{