@zwave-js/config 12.0.3 → 12.1.0

package/config/devices/0x013c/psm02.json

@@ -125,93 +125,30 @@
 		},
 		{
 			"#": "5[0x10]",
-			"label": "Illumination Report on Trigger",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 1
-				},
-				{
-					"label": "Enable",
-					"value": 0
-				}
-			]
+			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
+			"label": "Illumination Report On Trigger"
 		},
 		{
 			"#": "5[0x20]",
-			"label": "Temperature Report on Trigger",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 1
-				},
-				{
-					"label": "Enable",
-					"value": 0
-				}
-			]
+			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
+			"label": "Temperature Report On Trigger"
 		},
 		{
 			"#": "6[0x01]",
+			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
 			"label": "Magnetic Integrate Illumination",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 0,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 1
-				},
-				{
-					"label": "Enable",
-					"value": 0
-				}
-			]
+			"defaultValue": 0
 		},
 		{
 			"#": "6[0x02]",
+			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
 			"label": "PIR Integrate Illumination",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 0,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 1
-				},
-				{
-					"label": "Enable",
-					"value": 0
-				}
-			]
+			"defaultValue": 0
 		},
 		{
 			"#": "6[0x04]",
-			"label": "Magnetic Integrate PIR",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 1
-				},
-				{
-					"label": "Enable",
-					"value": 0
-				}
-			]
+			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
+			"label": "Magnetic Integrate PIR"
 		},
 		{
 			"#": "6[0x08]",
@@ -222,104 +159,41 @@
 			"defaultValue": 0,
 			"options": [
 				{
-					"label": "Same Room",
+					"label": "Same room",
 					"value": 0
 				},
 				{
-					"label": "Different Room",
+					"label": "Different room",
 					"value": 1
 				}
 			]
 		},
 		{
 			"#": "6[0x10]",
-			"label": "5 Second Delay Light Off",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 1
-				},
-				{
-					"label": "Enable",
-					"value": 0
-				}
-			]
+			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
+			"label": "5 Second Delay Light Off"
 		},
 		{
 			"#": "6[0x20]",
-			"label": "Auto Turn Off Light",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 1
-				},
-				{
-					"label": "Enable",
-					"value": 0
-				}
-			]
+			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
+			"label": "Auto Turn Off Light"
 		},
 		{
 			"#": "7[0x02]",
-			"label": "Send Motion Off Report",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 0,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Send Motion Off Report"
 		},
 		{
 			"#": "7[0x04]",
+			"$import": "~/templates/master_template.json#base_enable_disable",
 			"label": "PIR Super Sensitivity Mode",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"defaultValue": 1
 		},
 		{
 			"#": "7[0x08]",
+			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
 			"label": "Send Basic CC Off After Door Close",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 0,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 1
-				},
-				{
-					"label": "Enable",
-					"value": 0
-				}
-			]
+			"defaultValue": 0
 		},
 		{
 			"#": "7[0x10]",
@@ -341,39 +215,14 @@
 		},
 		{
 			"#": "7[0x20]",
+			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
 			"label": "Multi Command Encapsulated Auto Reports",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 0,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 1
-				},
-				{
-					"label": "Enable",
-					"value": 0
-				}
-			]
+			"defaultValue": 0
 		},
 		{
 			"#": "7[0x40]",
-			"label": "Report Battery State When Triggered",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 1
-				},
-				{
-					"label": "Enable",
-					"value": 0
-				}
-			]
+			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
+			"label": "Report Battery State When Triggered"
 		},
 		{
 			"#": "8",

package/config/devices/0x013c/psp05.json

@@ -44,7 +44,7 @@
 		},
 		{
 			"#": "8",
-			"label": "Re-detection interval",
+			"label": "Re-Detection Interval",
 			"description": "Multiples of 8 seconds to wait before re-detection",
 			"valueSize": 1,
 			"minValue": 1,
@@ -53,7 +53,7 @@
 		},
 		{
 			"#": "9",
-			"label": "Turn off light time",
+			"label": "Turn Off Light Time",
 			"description": "Time to wait after lighting has been turned on before turning off again",
 			"valueSize": 1,
 			"minValue": 0,
@@ -62,7 +62,7 @@
 		},
 		{
 			"#": "10",
-			"label": "Battery level reporting interval",
+			"label": "Battery Level Reporting Interval",
 			"description": "How frequently battery status should be reported",
 			"valueSize": 1,
 			"minValue": 0,
@@ -88,31 +88,20 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Don't Send Report",
+					"label": "Don't send report",
 					"value": 0
 				},
 				{
-					"label": "Send Report",
+					"label": "Send report",
 					"value": 1
 				}
 			]
 		},
 		{
 			"#": "7[0x04]",
-			"label": "Bit 2: Enable PIR super sensitivity mode.",
-			"valueSize": 1,
-			"defaultValue": 1,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "PIR Super Sensitivity Mode",
+			"defaultValue": 1
 		},
 		{
 			"#": "7[0x10]",
@@ -123,7 +112,7 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Report Notification",
+					"label": "Notification Report",
 					"value": 0
 				},
 				{
@@ -134,38 +123,16 @@
 		},
 		{
 			"#": "7[0x20]",
-			"label": "Bit 5: Send Multi CC in auto report",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Enable",
-					"value": 0
-				},
-				{
-					"label": "Disable",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
+			"label": "Send Multi CC in Auto Report",
+			"defaultValue": 0
 		},
 		{
 			"#": "7[0x40]",
-			"label": "Bit 6: Send Battery Report when Triggered",
+			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
+			"label": "Send Battery Report When Triggered",
 			"description": "Whether or not a battery status report should be sent when triggered",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Enable",
-					"value": 0
-				},
-				{
-					"label": "Disable",
-					"value": 1
-				}
-			]
+			"defaultValue": 0
 		}
 	]
 }

package/config/devices/0x013c/psr04.json

@@ -16,7 +16,7 @@
 	"paramInformation": [
 		{
 			"#": "1",
-			"label": "Basic Set OFF level",
+			"label": "Basic Set OFF Level",
 			"description": "Control the value represented by the left-side in area D.",
 			"valueSize": 1,
 			"minValue": 0,
@@ -25,7 +25,7 @@
 		},
 		{
 			"#": "2",
-			"label": "Basic Set ON level",
+			"label": "Basic Set ON Level",
 			"description": "Control the value represented by the right-side in area D.",
 			"valueSize": 1,
 			"minValue": 0,
@@ -52,21 +52,9 @@
 		},
 		{
 			"#": "26",
-			"label": "Disable Scene Holding report",
-			"description": "Send Central Scene Holding when the button is held.",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Scene Holding Report",
+			"description": "Send Central Scene Holding when the button is held."
 		}
 	]
 }

package/config/devices/0x013c/pst02-a-br.json

@@ -37,7 +37,7 @@
 		},
 		{
 			"#": "3",
-			"label": "Pir Sensitivity",
+			"label": "PIR Sensitivity",
 			"description": "Pir sensitivity settings.0 means disable the PIR motion.1 means the lowest sensitivity,99 means the highest sensitivity.high sensitivity means can detected long distance, but if there is more noise signal in the environment, it will re-trigger too frequency",
 			"valueSize": 1,
 			"minValue": 0,
@@ -86,7 +86,7 @@
 					"value": 127
 				},
 				{
-					"label": "Bit0: reserve",
+					"label": "Bit0: Reserve",
 					"value": 1
 				},
 				{
@@ -94,27 +94,27 @@
 					"value": 2
 				},
 				{
-					"label": "Bit2: disable the door/window function.(1:disable, 0:enable)",
+					"label": "Bit2: Disable the door/window function.(1:Disable, 0:Enable)",
 					"value": 4
 				},
 				{
-					"label": "Bit3: setting the temperature scale. 0: fahrenheit, 1:celsius",
+					"label": "Bit3: Setting the temperature scale. 0: Fahrenheit, 1:Celsius",
 					"value": 8
 				},
 				{
-					"label": "Bit4: disable the illumination report after event triggered. (1:disable, 0:enable)",
+					"label": "Bit4: Disable the illumination report after event triggered. (1:Disable, 0:Enable)",
 					"value": 10
 				},
 				{
-					"label": "Bit5: disable the temperature report after event triggered. (1:disable, 0:enable)",
+					"label": "Bit5: Disable the temperature report after event triggered. (1:Disable, 0:Enable)",
 					"value": 20
 				},
 				{
-					"label": "Bit6: reserve",
+					"label": "Bit6: Reserve",
 					"value": 40
 				},
 				{
-					"label": "Bit7: disable the back key release into test mode. (1:disable, 0:enable)",
+					"label": "Bit7: Disable the back key release into test mode. (1:Disable, 0:Enable)",
 					"value": 80
 				}
 			]
@@ -122,7 +122,7 @@
 		{
 			"#": "6",
 			"label": "Mult- Sensor Function Switch",
-			"description": "Multisensor function switch. using bit to control.caution: the value is unsigned byte, the range is from 0x00 ~ 0xff.  bit0: disable magnetic integrate  illumination to turn on the lighting  nodes in the association group 2.  (1:disable, 0:enable) bit1: disable PIR integrate  illumination to turn on the lighting  nodes in the association group 2.  (1:disable, 0:enable) bit2: disable magnetic integrate PIR  to turn on the lighting nodes in the  association group 2. (1:disable,  0:enable) (default is disable) bit3: when bit2 is 0 (enable), are the  device and the lighting in the same  room? 0: in the same room(default),1: in the different room. bit4: disable delay 5 seconds to turn off the light, when door/window closed. (1:disable, 0:enable) bit5: disable auto turn off the light, after door/window opened to turn on the light. (1:disable, 0:enable) bit6: reserve. bit7: reserve",
+			"description": "Multisensor function switch. using bit to control.caution: the value is unsigned byte, the range is from 0x00 ~ 0xff.  bit0: disable magnetic integrate  illumination to turn on the lighting  nodes in the association group 2.  (1:disable, 0:enable) bit1: disable PIR integrate  illumination to turn on the lighting  nodes in the association group 2.  (1:disable, 0:enable) bit2: disable magnetic integrate PIR  to turn on the lighting nodes in the  association group 2. (1:disable,  0:enable) (default is disable) bit3: when bit2 is 0 (enable), are the  device and the lighting in the same  room? 0: in the same room,1: in the different room. bit4: disable delay 5 seconds to turn off the light, when door/window closed. (1:disable, 0:enable) bit5: disable auto turn off the light, after door/window opened to turn on the light. (1:disable, 0:enable) bit6: reserve. bit7: reserve",
 			"valueSize": 1,
 			"defaultValue": 4,
 			"allowManualEntry": false,
@@ -132,35 +132,35 @@
 					"value": 127
 				},
 				{
-					"label": "Bit0: disable magnetic integrate illumination to turn on the lighting nodes in the association group 2. (1:disable, 0:enable)",
+					"label": "Bit0: Disable magnetic integrate illumination to turn on the lighting nodes in the association group 2. (1:Disable, 0:Enable)",
 					"value": 1
 				},
 				{
-					"label": "Bit1: disable PIR integrate illumination to turn on the lighting nodes in the association group 2. (1:disable, 0:enable)",
+					"label": "Bit1: Disable PIR integrate illumination to turn on the lighting nodes in the association group 2. (1:Disable, 0:Enable)",
 					"value": 2
 				},
 				{
-					"label": "Bit2: disable magnetic integrate pir",
+					"label": "Bit2: Disable magnetic integrate PIR",
 					"value": 4
 				},
 				{
-					"label": "Bit3: when bit2 is 0 (enable), are the device and the lighting in the same room? 0: in the same room(default),1: in the different room",
+					"label": "Bit3: When bit2 is 0 (Enable), are the device and the lighting in the same room? 0: In the same room,1: In the different room",
 					"value": 8
 				},
 				{
-					"label": "Bit4: disable delay 5 seconds to turn off the light, when door/window closed.(1:disable, 0:enable)",
+					"label": "Bit4: Disable delay 5 seconds to turn off the light, when door/window closed.(1:Disable, 0:Enable)",
 					"value": 10
 				},
 				{
-					"label": "Bit5: disable auto turn off the light, after door/window opened to turn on the light.(1:disable, 0:enable)",
+					"label": "Bit5: Disable auto turn off the light, after door/window opened to turn on the light.(1:Disable, 0:Enable)",
 					"value": 20
 				},
 				{
-					"label": "Bit6: reserve",
+					"label": "Bit6: Reserve",
 					"value": 40
 				},
 				{
-					"label": "Bit7: reserve",
+					"label": "Bit7: Reserve",
 					"value": 80
 				}
 			]
@@ -168,7 +168,7 @@
 		{
 			"#": "7",
 			"label": "Customer Function",
-			"description": "Customer function switch, using bit control.caution: the value is unsigned byte, the range is from 0x00 ~ 0xff.  bit0: reserve. bit1: enable sending motion off report. (0:disable, 1:enable) bit2: enable PIR super sensitivity mode. (0:disable, 1:enable) bit3: disable send out basic off after door closed. (1:disable, 0:enable) bit4: notification type,  0: using notification report.  1: using sensor binary report. bit5: disable multi cc in auto report. (1:disable, 0:enable) bit6: disable to report battery state when the device triggered.(1:disable, 0:enable) bit7: reserve",
+			"description": "Customer function switch, using bit control.caution: the value is unsigned byte, the range is from 0x00 ~ 0xff.  bit0: reserve. bit1: enable sending motion off report. (0:disable, 1:enable) bit2: enable PIR super sensitivity mode. (0:disable, 1:enable) bit3: disable send out basic off after door closed. (1:disable, 0:enable) bit4: notification type,  0: using notification report.  1: using Binary Sensor report. bit5: disable multi cc in auto report. (1:disable, 0:enable) bit6: disable to report battery state when the device triggered.(1:disable, 0:enable) bit7: reserve",
 			"valueSize": 1,
 			"defaultValue": 4,
 			"allowManualEntry": false,
@@ -178,42 +178,42 @@
 					"value": 127
 				},
 				{
-					"label": "Bit0: reserve",
+					"label": "Bit0: Reserve",
 					"value": 1
 				},
 				{
-					"label": "Bit1: enable sending motion off report. (0:disable, 1:enable)",
+					"label": "Bit1: Enable sending motion off report. (0:Disable, 1:Enable)",
 					"value": 2
 				},
 				{
-					"label": "Bit2: enable PIR super sensitivity mode. (0:disable, 1:enable)",
+					"label": "Bit2: Enable PIR super sensitivity mode. (0:Disable, 1:Enable)",
 					"value": 4
 				},
 				{
-					"label": "Bit3: disable send out basic off after door closed. (1:disable,0:enable)",
+					"label": "Bit3: Disable send out basic off after door closed. (1:Disable,0:Enable)",
 					"value": 8
 				},
 				{
-					"label": "Bit4: notification type, 0: using notification report. 1: using sensor binary report",
+					"label": "Bit4: Notification type, 0: Using Notification Report. 1: Using Binary Sensor Report",
 					"value": 10
 				},
 				{
-					"label": "Bit5: disable multi cc in auto report. (1:disable, 0:enable)",
+					"label": "Bit5: Disable multi cc in auto report. (1:Disable, 0:Enable)",
 					"value": 20
 				},
 				{
-					"label": "Bit6: disable to report battery state when the device triggered.(1:disable, 0:enable)",
+					"label": "Bit6: Disable to report battery state when the device triggered.(1:Disable, 0:Enable)",
 					"value": 40
 				},
 				{
-					"label": "Bit7: reserve",
+					"label": "Bit7: Reserve",
 					"value": 80
 				}
 			]
 		},
 		{
 			"#": "8",
-			"label": "Pir Re- Detect Interval Time",
+			"label": "PIR Re- Detect Interval Time",
 			"description": "Default tick is 3 (24 seconds)",
 			"valueSize": 1,
 			"unit": "seconds",