@zwave-js/config 12.0.0-beta.4 → 12.0.0

package/config/devices/0x010f/fgwreu-111.json

@@ -65,8 +65,8 @@
 			"#": "13",
 			"$import": "~/templates/master_template.json#base_0-100_nounit",
 			"label": "LED Indicator: Brightness",
-			"defaultValue": 100,
-			"unit": "%"
+			"unit": "%",
+			"defaultValue": 100
 		},
 		{
 			"#": "24",
@@ -153,8 +153,8 @@
 		},
 		{
 			"#": "32[0xff000000]",
-			"label": "Alarm Configuration: 3rd Slot: Notification Type",
 			"$import": "templates/fibaro_template.json#alarm_configuration_notification_type",
+			"label": "Alarm Configuration: 3rd Slot: Notification Type",
 			"defaultValue": 1
 		},
 		{
@@ -223,8 +223,8 @@
 		{
 			"#": "35",
 			"label": "Alarm Duration",
-			"unit": "seconds",
 			"valueSize": 2,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 32400,
 			"defaultValue": 600,
@@ -346,8 +346,8 @@
 		{
 			"#": "152",
 			"label": "Venetian Blinds: Full Turn Duration",
-			"unit": "0.01 seconds",
 			"valueSize": 4,
+			"unit": "0.01 seconds",
 			"minValue": 0,
 			"maxValue": 65535,
 			"defaultValue": 150
@@ -377,8 +377,8 @@
 			"#": "154",
 			"label": "Motor Overrun",
 			"description": "Duration for which motor will continue to run after end switch is hit.",
-			"unit": "0.1 seconds",
 			"valueSize": 2,
+			"unit": "0.1 seconds",
 			"minValue": 1,
 			"maxValue": 255,
 			"defaultValue": 10
@@ -387,8 +387,8 @@
 			"#": "155",
 			"label": "Limit Switch Power Threshold",
 			"description": "Power threshold interpreted as reaching a limit switch.",
-			"unit": "W",
 			"valueSize": 2,
+			"unit": "W",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 10,
@@ -402,8 +402,8 @@
 		{
 			"#": "156",
 			"label": "Blind Up Duration",
-			"unit": "0.01 seconds",
 			"valueSize": 4,
+			"unit": "0.01 seconds",
 			"minValue": 1,
 			"maxValue": 65535,
 			"defaultValue": 6000
@@ -411,8 +411,8 @@
 		{
 			"#": "157",
 			"label": "Blind Down Duration",
-			"unit": "0.01 seconds",
 			"valueSize": 4,
+			"unit": "0.01 seconds",
 			"minValue": 1,
 			"maxValue": 65535,
 			"defaultValue": 6000

package/config/devices/0x0115/haseman_rs-10pm2.json

@@ -18,10 +18,10 @@
 			"#": "11",
 			"label": "Reporting Time",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 1,
 			"maxValue": 255,
 			"defaultValue": 30,
-			"unit": "seconds",
 			"unsigned": true
 		},
 		{

package/config/devices/0x0115/v3.json

@@ -151,11 +151,11 @@
 			"label": "Multilevel Report Interval",
 			"description": "Minimal time (in seconds) between Sensor Multilevel reports. See zunoSendReport(). Values less than 30 should not be used to conform to Z-Wave Plus, use them for debug only!",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 30,
-			"unsigned": true,
-			"unit": "seconds"
+			"unsigned": true
 		},
 		{
 			"#": "12",

package/config/devices/0x0115/zme_05459.json

@@ -63,8 +63,8 @@
 		{
 			"#": "2",
 			"label": "Automatically open or close after",
-			"unit": "Seconds",
 			"valueSize": 2,
+			"unit": "Seconds",
 			"minValue": 0,
 			"maxValue": 65535,
 			"defaultValue": 0,
@@ -107,8 +107,8 @@
 			"#": "4",
 			"label": "Full close time",
 			"description": "Time in seconds to go from opened to closed state.",
-			"unit": "Seconds",
 			"valueSize": 1,
+			"unit": "Seconds",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 60,
@@ -124,8 +124,8 @@
 			"#": "5",
 			"label": "Full open time",
 			"description": "Time in seconds to go from closed to open state.",
-			"unit": "Seconds",
 			"valueSize": 1,
+			"unit": "Seconds",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 60,
@@ -217,9 +217,9 @@
 			"#": "10",
 			"label": "Typical click timeout",
 			"valueSize": 1,
+			"unit": "10 ms",
 			"minValue": 0,
 			"maxValue": 100,
-			"unit": "10 ms",
 			"defaultValue": 50
 		},
 		{

package/config/devices/0x0115/zme_06433.json

@@ -110,11 +110,11 @@
 			]
 		},
 		{
+			"units": "10 ms",
 			"#": "5",
 			"label": "Dimming speed",
 			"description": "Time to dim on button presses",
 			"valueSize": 1,
-			"units": "10 ms",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 30,

package/config/devices/0x0115/zme_06436.json

@@ -48,8 +48,8 @@
 		{
 			"#": "2",
 			"label": "Automatically open or close after",
-			"unit": "Seconds",
 			"valueSize": 2,
+			"unit": "Seconds",
 			"minValue": 0,
 			"maxValue": 65535,
 			"defaultValue": 0,
@@ -92,8 +92,8 @@
 			"#": "4",
 			"label": "Full close time",
 			"description": "Time in seconds to go from opened to closed state.",
-			"unit": "Seconds",
 			"valueSize": 1,
+			"unit": "Seconds",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 60,
@@ -109,8 +109,8 @@
 			"#": "5",
 			"label": "Full open time",
 			"description": "Time in seconds to go from closed to open state.",
-			"unit": "Seconds",
 			"valueSize": 1,
+			"unit": "Seconds",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 60,
@@ -197,9 +197,9 @@
 			"#": "10",
 			"label": "Typical click timeout",
 			"valueSize": 1,
+			"unit": "10 ms",
 			"minValue": 0,
 			"maxValue": 100,
-			"unit": "10 ms",
 			"defaultValue": 50
 		},
 		{

package/config/devices/0x0115/zme_ft.json

@@ -23,8 +23,8 @@
 		{
 			"#": "1",
 			"label": "Boost Dry Mode Duration",
-			"unit": "seconds",
 			"valueSize": 2,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 1800,
 			"defaultValue": 1800
@@ -82,8 +82,8 @@
 		{
 			"#": "4",
 			"label": "Temperature Control Interval",
-			"unit": "sec",
 			"valueSize": 1,
+			"unit": "sec",
 			"minValue": 1,
 			"maxValue": 60,
 			"defaultValue": 18
@@ -91,8 +91,8 @@
 		{
 			"#": "5",
 			"label": "Maximum Temperature Deviation",
-			"unit": "0.1 °C",
 			"valueSize": 1,
+			"unit": "0.1 °C",
 			"minValue": 1,
 			"maxValue": 60,
 			"defaultValue": 30
@@ -100,8 +100,8 @@
 		{
 			"#": "6",
 			"label": "Maximum Temperature",
-			"unit": "°C",
 			"valueSize": 1,
+			"unit": "°C",
 			"minValue": 20,
 			"maxValue": 55,
 			"defaultValue": 27
@@ -110,8 +110,8 @@
 			"#": "10",
 			"label": "Typical Click Timeout",
 			"description": "Used to differentiate click from hold",
-			"unit": "10 ms",
 			"valueSize": 1,
+			"unit": "10 ms",
 			"minValue": 1,
 			"maxValue": 100,
 			"defaultValue": 50

package/config/devices/0x0116/hsp02.json

@@ -70,32 +70,32 @@
 			"#": "4",
 			"label": "Re-trigger Interval Setting",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 5,
 			"maxValue": 255,
 			"defaultValue": 180,
-			"unsigned": true,
-			"unit": "seconds"
+			"unsigned": true
 		},
 		{
 			"#": "5",
 			"label": "Brightness Threshold",
 			"description": "Motion sensing is active while the brightness is below this value.",
 			"valueSize": 1,
+			"unit": "lux",
 			"minValue": 1,
 			"maxValue": 100,
-			"defaultValue": 10,
-			"unit": "lux"
+			"defaultValue": 10
 		},
 		{
 			"#": "6",
 			"label": "On time",
 			"description": "The amount of time the module/lighting should stay ON for.",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 5,
 			"maxValue": 255,
 			"defaultValue": 15,
-			"unsigned": true,
-			"unit": "seconds"
+			"unsigned": true
 		}
 	]
 }

package/config/devices/0x0118/tz65d.json

@@ -164,11 +164,11 @@
 			"#": "20",
 			"label": "Poll Group 2 Interval ",
 			"valueSize": 1,
+			"unit": "minutes",
 			"minValue": 1,
 			"maxValue": 255,
 			"defaultValue": 2,
-			"unsigned": true,
-			"unit": "minutes"
+			"unsigned": true
 		},
 		{
 			"#": "22",

package/config/devices/0x0118/tz66d.json

@@ -166,11 +166,11 @@
 			"#": "20",
 			"label": "Poll Group 2 Interval",
 			"valueSize": 1,
+			"unit": "minutes",
 			"minValue": 1,
 			"maxValue": 255,
 			"defaultValue": 2,
-			"unsigned": true,
-			"unit": "minutes"
+			"unsigned": true
 		},
 		{
 			"#": "22",

package/config/devices/0x0118/tz69.json

@@ -69,8 +69,8 @@
 			"#": "3",
 			"label": "Watt Meter Report Period",
 			"description": "5s x 720 (default) = 3600s = 1 hour",
-			"unit": "5 seconds",
 			"valueSize": 2,
+			"unit": "5 seconds",
 			"minValue": 1,
 			"maxValue": 32767,
 			"defaultValue": 720
@@ -79,8 +79,8 @@
 			"#": "4",
 			"label": "kWH Meter Report Period",
 			"description": "10m * 6 (default) = 60m = 1 hour",
-			"unit": "10 minutes",
 			"valueSize": 2,
+			"unit": "10 minutes",
 			"minValue": 0,
 			"maxValue": 32767,
 			"defaultValue": 6
@@ -89,8 +89,8 @@
 			"#": "5",
 			"label": "Threshold of Watt for Load Caution",
 			"description": "Above this level, switch enters overload mode",
-			"unit": "W",
 			"valueSize": 2,
+			"unit": "W",
 			"minValue": 10,
 			"maxValue": 3000,
 			"defaultValue": 3000
@@ -99,8 +99,8 @@
 			"#": "6",
 			"label": "Threshold of kWH for Load Caution",
 			"description": "Over this level, unit with go into overload mode",
-			"unit": "kWH",
 			"valueSize": 2,
+			"unit": "kWH",
 			"minValue": 1,
 			"maxValue": 10000,
 			"defaultValue": 10000

package/config/devices/0x0118/tz75.json

@@ -17,8 +17,8 @@
 		{
 			"#": "1",
 			"label": "Watt meter report period",
-			"unit": "5s",
 			"valueSize": 2,
+			"unit": "5s",
 			"minValue": 1,
 			"maxValue": 32767,
 			"defaultValue": 720
@@ -26,8 +26,8 @@
 		{
 			"#": "2",
 			"label": "KWH Meter Report period",
-			"unit": "10min",
 			"valueSize": 2,
+			"unit": "10min",
 			"minValue": 1,
 			"maxValue": 32767,
 			"defaultValue": 6
@@ -35,8 +35,8 @@
 		{
 			"#": "3",
 			"label": "Threshold of watt for load caution",
-			"unit": "W",
 			"valueSize": 2,
+			"unit": "W",
 			"minValue": 10,
 			"maxValue": 1100,
 			"defaultValue": 1100
@@ -44,8 +44,8 @@
 		{
 			"#": "4",
 			"label": "Threshold of KWH for load caution",
-			"unit": "KWH",
 			"valueSize": 2,
+			"unit": "KWH",
 			"minValue": 0,
 			"maxValue": 10000,
 			"defaultValue": 0

package/config/devices/0x0118/tz79.json

@@ -52,8 +52,8 @@
 			"#": "3",
 			"label": "Watt Meter Report Period",
 			"description": "5s x 720 (default) = 3600s = 1 hour",
-			"unit": "5s",
 			"valueSize": 2,
+			"unit": "5s",
 			"minValue": 1,
 			"maxValue": 32767,
 			"defaultValue": 720
@@ -62,8 +62,8 @@
 			"#": "4",
 			"label": "kWH Meter Report Period",
 			"description": "6x10min = 1 hour",
-			"unit": "10min",
 			"valueSize": 2,
+			"unit": "10min",
 			"minValue": 1,
 			"maxValue": 32767,
 			"defaultValue": 6
@@ -71,8 +71,8 @@
 		{
 			"#": "5",
 			"label": "Threshold of Watt for load caution",
-			"unit": "1Watt",
 			"valueSize": 2,
+			"unit": "1Watt",
 			"minValue": 10,
 			"maxValue": 3000,
 			"defaultValue": 3000
@@ -80,8 +80,8 @@
 		{
 			"#": "6",
 			"label": "Threshold of kWH for load caution",
-			"unit": "Kwh",
 			"valueSize": 2,
+			"unit": "Kwh",
 			"minValue": 0,
 			"maxValue": 10000,
 			"defaultValue": 0

package/config/devices/0x011a/zw15sm.json

@@ -44,8 +44,8 @@
 		{
 			"#": "8",
 			"label": "METER_REPORT Instant Energy Interval",
-			"unit": "minutes",
 			"valueSize": 1,
+			"unit": "minutes",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 0,
@@ -54,8 +54,8 @@
 		{
 			"#": "9",
 			"label": "Instant Energy Autosend Interval",
-			"unit": "minutes",
 			"valueSize": 1,
+			"unit": "minutes",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 0,
@@ -64,8 +64,8 @@
 		{
 			"#": "10",
 			"label": "Accumulated Energy Autosend Interval report",
-			"unit": "minutes",
 			"valueSize": 1,
+			"unit": "minutes",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 0,
@@ -84,8 +84,8 @@
 			"#": "12",
 			"label": "Power change notification threshold",
 			"description": "Minimum change in wattage report",
-			"unit": "deciwatts",
 			"valueSize": 1,
+			"unit": "deciwatts",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 10,

package/config/devices/0x011a/zwn-bpc_0.0-5.9.json

@@ -24,8 +24,8 @@
 		{
 			"#": "0",
 			"label": "Motion timeout",
-			"unit": "minutes",
 			"valueSize": 1,
+			"unit": "minutes",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 1,

package/config/devices/0x0131/ne_nas_ab02z.json

@@ -115,8 +115,8 @@
 		{
 			"#": "3",
 			"label": "Doorbell Duration",
-			"unit": "seconds",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 1,

package/config/devices/0x0131/psp02.json

@@ -55,8 +55,8 @@
 		{
 			"#": "8",
 			"label": "PIR motion re-trigger min interval",
-			"unit": "8s ticks",
 			"valueSize": 1,
+			"unit": "8s ticks",
 			"minValue": 0,
 			"maxValue": 127,
 			"defaultValue": 3
@@ -65,8 +65,8 @@
 			"#": "9",
 			"label": "Light on time hysteresis",
 			"description": "time to keep the light on without motion",
-			"unit": "8s ticks",
 			"valueSize": 1,
+			"unit": "8s ticks",
 			"minValue": 0,
 			"maxValue": 127,
 			"defaultValue": 4
@@ -74,8 +74,8 @@
 		{
 			"#": "10",
 			"label": "Battery level auto-report interval",
-			"unit": "ticks",
 			"valueSize": 1,
+			"unit": "ticks",
 			"minValue": 0,
 			"maxValue": 127,
 			"defaultValue": 12
@@ -83,8 +83,8 @@
 		{
 			"#": "11",
 			"label": "Door state report interval",
-			"unit": "ticks",
 			"valueSize": 1,
+			"unit": "ticks",
 			"minValue": 0,
 			"maxValue": 127,
 			"defaultValue": 12
@@ -92,8 +92,8 @@
 		{
 			"#": "12",
 			"label": "Illumination auto report interval",
-			"unit": "ticks",
 			"valueSize": 1,
+			"unit": "ticks",
 			"minValue": 0,
 			"maxValue": 127,
 			"defaultValue": 12
@@ -101,8 +101,8 @@
 		{
 			"#": "13",
 			"label": "Temperature report interval",
-			"unit": "ticks",
 			"valueSize": 1,
+			"unit": "ticks",
 			"minValue": 0,
 			"maxValue": 127,
 			"defaultValue": 12
@@ -111,8 +111,8 @@
 			"#": "20",
 			"label": "Tick duration",
 			"description": "auto-reports tick duration",
-			"unit": "s",
 			"valueSize": 1,
+			"unit": "s",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 30,
@@ -121,8 +121,8 @@
 		{
 			"#": "21",
 			"label": "Temperature differential to report",
-			"unit": "Fahrenheit",
 			"valueSize": 1,
+			"unit": "Fahrenheit",
 			"minValue": 0,
 			"maxValue": 127,
 			"defaultValue": 1
@@ -130,8 +130,8 @@
 		{
 			"#": "22",
 			"label": "Min illumination differential",
-			"unit": "percent",
 			"valueSize": 1,
+			"unit": "percent",
 			"minValue": 0,
 			"maxValue": 63,
 			"defaultValue": 0

package/config/devices/0x0131/zip-pab01.json

@@ -18,8 +18,8 @@
 			"#": "1",
 			"label": "Power meter report period",
 			"description": "Power meter report period, in 5 seconds unit. 720 -> 1 hour",
-			"unit": "5sec",
 			"valueSize": 2,
+			"unit": "5sec",
 			"minValue": 1,
 			"maxValue": 32767,
 			"defaultValue": 720
@@ -28,8 +28,8 @@
 			"#": "2",
 			"label": "Energy meter report period",
 			"description": "The accumulated power consumption report period",
-			"unit": "5sec",
 			"valueSize": 2,
+			"unit": "5sec",
 			"minValue": 1,
 			"maxValue": 32767,
 			"defaultValue": 720

package/config/devices/0x0138/zcombo-g.json

@@ -26,8 +26,8 @@
 			"#": "1",
 			"label": "SuperVision report timeout",
 			"description": "ZCOMBO will send the message over SuperVision Command Class and it will wait for the SuperVision report from the Controller for the SuperVision report timeout time.",
-			"unit": "ms",
 			"valueSize": 2,
+			"unit": "ms",
 			"minValue": 500,
 			"maxValue": 5000,
 			"defaultValue": 1500,
@@ -47,8 +47,8 @@
 			"#": "3",
 			"label": "SuperVision wait time",
 			"description": "Before retrying the message, ZCOMBO will wait for the SuperVision wait time. Actual wait time is calculated using the formula: Wait Time = SuperVision wait time base-value + random-value + (attempt-count x 5 seconds). The random value will be between 100 and 1100 milliseconds.",
-			"unit": "seconds",
 			"valueSize": 2,
+			"unit": "seconds",
 			"minValue": 1,
 			"maxValue": 60,
 			"defaultValue": 5,

package/config/devices/0x013c/pad02.json

@@ -54,8 +54,8 @@
 			"#": "3",
 			"label": "Auto off timer",
 			"description": "Automatic OFF after given time.",
-			"unit": "1s",
 			"valueSize": 2,
+			"unit": "1s",
 			"minValue": 0,
 			"maxValue": 32767,
 			"defaultValue": 0

package/config/devices/0x013c/pan03.json

@@ -17,8 +17,8 @@
 		{
 			"#": "1",
 			"label": "Watt Meter Report Period",
-			"unit": "5",
 			"valueSize": 2,
+			"unit": "5",
 			"minValue": 1,
 			"maxValue": 32767,
 			"defaultValue": 720
@@ -26,8 +26,8 @@
 		{
 			"#": "2",
 			"label": "kWh Meter Report Period",
-			"unit": "10 minutes",
 			"valueSize": 2,
+			"unit": "10 minutes",
 			"minValue": 1,
 			"maxValue": 32767,
 			"defaultValue": 6
@@ -35,8 +35,8 @@
 		{
 			"#": "3",
 			"label": "Threshold of current for Load caution",
-			"unit": "0.01 A",
 			"valueSize": 2,
+			"unit": "0.01 A",
 			"minValue": 10,
 			"maxValue": 1100,
 			"defaultValue": 1100