@zwave-js/config 12.0.0-beta.4 → 12.0.0

package/config/devices/0x027a/zse29.json

@@ -28,8 +28,8 @@
 	"paramInformation": [
 		{
 			"#": "1",
-			"$import": "~/templates/master_template.json#base_0-99_nounit",
 			"$if": "firmwareVersion >= 2.0",
+			"$import": "~/templates/master_template.json#base_0-99_nounit",
 			"label": "Basic Set Value",
 			"description": "Set the value of Basic Set commands sent to the devices associated in Group 2",
 			"defaultValue": 99
@@ -56,8 +56,8 @@
 			"$if": "firmwareVersion >= 2.0",
 			"label": "Brightness Threshold",
 			"description": "The sensor will report motion only if brightness level is below the set value (10 is the lowest value the sensor reports).",
-			"unit": "lux",
 			"valueSize": 2,
+			"unit": "lux",
 			"minValue": 0,
 			"maxValue": 900,
 			"defaultValue": 0,
@@ -77,8 +77,8 @@
 			"$if": "firmwareVersion >= 2.0",
 			"label": "Re-trigger Interval",
 			"description": "Delay before the sensor reports no motion after detecting the last motion activity (add 5 seconds to entered value).",
-			"unit": "+5 seconds",
 			"valueSize": 2,
+			"unit": "+5 seconds",
 			"minValue": 0,
 			"maxValue": 720,
 			"defaultValue": 0,
@@ -93,8 +93,8 @@
 			"#": "6",
 			"$if": "firmwareVersion >= 2.0",
 			"label": "Lux Reporting Frequency",
-			"unit": "minutes",
 			"valueSize": 2,
+			"unit": "minutes",
 			"minValue": 1,
 			"maxValue": 1440,
 			"defaultValue": 30
@@ -104,8 +104,8 @@
 			"$if": "firmwareVersion >= 2.0",
 			"label": "Manual Motion Re-trigger Time Setting",
 			"description": "Read the value for the Motion Re-trigger Time set by knob on sensor (overridden by setting Motion Re-trigger Time parameter).",
-			"unit": "seconds",
 			"valueSize": 2,
+			"unit": "seconds",
 			"minValue": 5,
 			"maxValue": 720,
 			"defaultValue": 5,
@@ -122,8 +122,8 @@
 			"$if": "firmwareVersion >= 2.0",
 			"label": "Manual Brightness Threshold Setting",
 			"description": "Read the value for the Brightness Threshold set by knob on sensor (overridden by setting Brightness Threshold parameter).",
-			"unit": "lux",
 			"valueSize": 2,
+			"unit": "lux",
 			"minValue": 10,
 			"maxValue": 900,
 			"defaultValue": 900,

package/config/devices/0x027a/zse30.json

@@ -37,8 +37,8 @@
 			"#": "3",
 			"label": "Audio Alarm: First Beep Duration",
 			"description": "Duration of First Beep",
-			"unit": "seconds",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 10,
 			"maxValue": 255,
 			"defaultValue": 60,
@@ -48,8 +48,8 @@
 			"#": "4",
 			"label": "Audio Alarm: Beep Duration",
 			"description": "Beep Duration after first Beep",
-			"unit": "seconds",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 5,
 			"maxValue": 255,
 			"defaultValue": 5,

package/config/devices/0x027a/zse33.json

@@ -55,15 +55,13 @@
 			"#": "3",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "Chime Sound Duration",
-			"defaultValue": 2,
-			"unit": "cycles"
+			"unit": "cycles",
+			"defaultValue": 2
 		},
 		{
 			"#": "4",
 			"label": "Chime Volume",
 			"valueSize": 1,
-			"minValue": 1,
-			"maxValue": 3,
 			"defaultValue": 3,
 			"allowManualEntry": false,
 			"options": [
@@ -103,8 +101,6 @@
 			"#": "7",
 			"label": "Operating Mode",
 			"valueSize": 1,
-			"minValue": 1,
-			"maxValue": 2,
 			"defaultValue": 2,
 			"allowManualEntry": false,
 			"options": [

package/config/devices/0x027a/zse40.json

@@ -51,8 +51,8 @@
 		{
 			"#": "2",
 			"label": "Temperature Reporting Threshold",
-			"unit": "0.1 °",
 			"valueSize": 1,
+			"unit": "0.1 °",
 			"minValue": 0,
 			"maxValue": 50,
 			"defaultValue": 10
@@ -60,8 +60,8 @@
 		{
 			"#": "3",
 			"label": "Humidity Reporting Threshold",
-			"unit": "%",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 1,
 			"maxValue": 50,
 			"defaultValue": 10
@@ -69,8 +69,8 @@
 		{
 			"#": "4",
 			"label": "Brightness Reporting Threshold",
-			"unit": "%",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 1,
 			"maxValue": 50,
 			"defaultValue": 10
@@ -89,8 +89,8 @@
 			// Update 17.9 changed the unit to seconds
 			"$if": "firmwareVersion >= 17.9 && firmwareVersion < 24.16",
 			"label": "Re-trigger Interval",
-			"unit": "seconds",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 15,
 			"maxValue": 60,
 			"defaultValue": 15,
@@ -100,8 +100,8 @@
 			"#": "5",
 			// Update 24.16 changed the range to 15-255, this also applies to HW version 1.0
 			"label": "Re-trigger Interval",
-			"unit": "seconds",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 15,
 			"maxValue": 255,
 			"defaultValue": 15,

package/config/devices/0x027a/zse41.json

@@ -41,11 +41,11 @@
 		},
 		{
 			"#": "5",
+			"label": "Sensor Behavior",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"unsigned": true,
 			"allowManualEntry": false,
-			"label": "Sensor Behavior",
 			"options": [
 				{
 					"label": "Normally Closed (Report open when magnet is away)",

package/config/devices/0x0287/iblindsv3.json

@@ -101,10 +101,10 @@
 			"#": "6",
 			"label": "Movement Duration",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 100,
-			"defaultValue": 0,
-			"unit": "seconds"
+			"defaultValue": 0
 		},
 		{
 			"#": "7",
@@ -112,8 +112,8 @@
 			"label": "Remote Calibration",
 			"valueSize": 1,
 			"defaultValue": 0,
-			"allowManualEntry": false,
 			"writeOnly": true,
+			"allowManualEntry": false,
 			"options": [
 				{
 					"label": "Idle",
@@ -152,8 +152,8 @@
 			"description": "Overrides Set commands with a value of 99 to use the value defined in parameter 4 (Default ON Value) instead",
 			"valueSize": 1,
 			"defaultValue": 0,
-			"allowManualEntry": false,
 			"writeOnly": true,
+			"allowManualEntry": false,
 			"options": [
 				{
 					"label": "Disable",

package/config/devices/0x028c/pwly-7828-a1.json

@@ -111,10 +111,10 @@
 			"#": "5",
 			"label": "Temperature Calibration",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": -5,
 			"maxValue": 5,
 			"defaultValue": 0,
-			"unit": "°F",
 			"options": [
 				{
 					"label": "No change",
@@ -171,10 +171,10 @@
 			"label": "Swing Setting",
 			"description": "Number of degrees from the set point at which the HVAC will turn on",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": 0,
 			"maxValue": 10,
 			"defaultValue": 1,
-			"unit": "°F",
 			"options": [
 				{
 					"label": "No swing",
@@ -187,10 +187,10 @@
 			"label": "Differential Setting",
 			"description": "Number of degrees from the set point at which the 2nd stage will engage",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": 0,
 			"maxValue": 10,
 			"defaultValue": 3,
-			"unit": "°F",
 			"options": [
 				{
 					"label": "No differential",

package/config/devices/0x0301/zwave_clamp.json

@@ -17,8 +17,8 @@
 		{
 			"#": "2",
 			"label": "MEAS_PERIOD",
-			"unit": "s",
 			"valueSize": 1,
+			"unit": "s",
 			"minValue": 30,
 			"maxValue": 120,
 			"defaultValue": 30
@@ -34,8 +34,8 @@
 		{
 			"#": "4",
 			"label": "RES_ACTIVE_POWER",
-			"unit": "W",
 			"valueSize": 1,
+			"unit": "W",
 			"minValue": 1,
 			"maxValue": 100,
 			"defaultValue": 4

package/config/devices/0x030f/ds100.json

@@ -18,8 +18,8 @@
 			"#": "0",
 			"label": "Watt Meter Report Period",
 			"description": "720*5s=3600s=1hour",
-			"unit": "5s",
 			"valueSize": 2,
+			"unit": "5s",
 			"minValue": 1,
 			"maxValue": 32767,
 			"defaultValue": 720
@@ -28,8 +28,8 @@
 			"#": "2",
 			"label": "KWH Meter Report Period",
 			"description": "6*10 min = 1 hour",
-			"unit": "10 minutes",
 			"valueSize": 2,
+			"unit": "10 minutes",
 			"minValue": 1,
 			"maxValue": 32767,
 			"defaultValue": 6
@@ -80,8 +80,8 @@
 			"#": "5",
 			"label": "Threshold of current for load caution",
 			"description": "750*0.01A=7.5A",
-			"unit": "0.01A",
 			"valueSize": 2,
+			"unit": "0.01A",
 			"minValue": 10,
 			"maxValue": 750,
 			"defaultValue": 750
@@ -89,8 +89,8 @@
 		{
 			"#": "6",
 			"label": "Threshold of KWH for load caution",
-			"unit": "1KWh",
 			"valueSize": 2,
+			"unit": "1KWh",
 			"minValue": 1,
 			"maxValue": 10000,
 			"defaultValue": 10000
@@ -108,8 +108,8 @@
 			"#": "8",
 			"label": "Auto off timer",
 			"description": "0: Disable auto off function, 1: 0x0-0x7FFF 1s-32767s",
-			"unit": "1s",
 			"valueSize": 2,
+			"unit": "1s",
 			"minValue": 0,
 			"maxValue": 32767,
 			"defaultValue": 0

package/config/devices/0x030f/mt-100.json

@@ -28,8 +28,8 @@
 			"#": "2",
 			"label": "On/Off Duration",
 			"description": "how long the associated devices should stay ON status",
-			"unit": "Second",
 			"valueSize": 2,
+			"unit": "Second",
 			"minValue": 5,
 			"maxValue": 600,
 			"defaultValue": 30
@@ -38,8 +38,8 @@
 			"#": "3",
 			"label": "Basic Set Level",
 			"description": "value when PIR detector is triggered and Basic Set command sent",
-			"unit": "Percent",
 			"valueSize": 1,
+			"unit": "Percent",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 255,
@@ -74,8 +74,8 @@
 			"#": "5",
 			"label": "Ambient illumination Lux Level",
 			"description": "Set a lux level value which determines when the light sensor is activated",
-			"unit": "Lux",
 			"valueSize": 2,
+			"unit": "Lux",
 			"minValue": 0,
 			"maxValue": 1000,
 			"defaultValue": 100
@@ -84,8 +84,8 @@
 			"#": "6",
 			"label": "Retrigger Interval Setting",
 			"description": "Interval of being re-triggered after the PIR detector has been triggered.",
-			"unit": "Second",
 			"valueSize": 1,
+			"unit": "Second",
 			"minValue": 0,
 			"maxValue": 8,
 			"defaultValue": 8
@@ -94,8 +94,8 @@
 			"#": "7",
 			"label": "Light Sensor Polling Interva Time",
 			"description": "Set the light sensor measure ambient illumination level interval time",
-			"unit": "Second",
 			"valueSize": 2,
+			"unit": "Second",
 			"minValue": 60,
 			"maxValue": 36000,
 			"defaultValue": 180,
@@ -112,8 +112,8 @@
 		{
 			"#": "9",
 			"label": "Ambient illumination Lux Level Report",
-			"unit": "Lux",
 			"valueSize": 2,
+			"unit": "Lux",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 100

package/config/devices/0x0312/mp22zd.json

@@ -43,10 +43,10 @@
 			"label": "Night Mode Brightness Level",
 			"description": "Hold button for two seconds to enter night mode.",
 			"valueSize": 1,
+			"unit": "10%",
 			"minValue": 1,
 			"maxValue": 10,
 			"defaultValue": 2,
-			"unit": "10%",
 			"unsigned": true
 		},
 		{

package/config/devices/0x0312/zks31.json

@@ -35,8 +35,6 @@
 			"#": "2",
 			"label": "LED Indicator Color",
 			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 6,
 			"defaultValue": 0,
 			"unsigned": true,
 			"allowManualEntry": false,
@@ -188,8 +186,6 @@
 			"#": "24",
 			"label": "Center Press: Brightness",
 			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 3,
 			"defaultValue": 0,
 			"unsigned": true,
 			"allowManualEntry": false,
@@ -245,8 +241,6 @@
 			"#": "19",
 			"label": "External Switch Type",
 			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
 			"defaultValue": 0,
 			"unsigned": true,
 			"allowManualEntry": false,
@@ -289,8 +283,8 @@
 			"#": "22",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "Diming Rate (Z-Wave On)",
-			"defaultValue": 255,
 			"unit": "seconds",
+			"defaultValue": 255,
 			"options": [
 				{
 					"label": "Instant",
@@ -306,8 +300,8 @@
 			"#": "23",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "Diming Rate (Z-Wave Off)",
-			"defaultValue": 255,
 			"unit": "seconds",
+			"defaultValue": 255,
 			"options": [
 				{
 					"label": "Instant",

package/config/devices/0x0312/zw39.json

@@ -70,8 +70,6 @@
 			"#": "10",
 			"label": "Local Dimmer Speed Control",
 			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,
 			"options": [

package/config/devices/0x0313/e0400z-ef.json

@@ -39,8 +39,6 @@
 			"label": "Basic Set Value (Open)",
 			"description": "Allowable range: 0-99, 255",
 			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 255,
 			"defaultValue": 255,
 			"unsigned": true,
 			"allowManualEntry": false,
@@ -60,8 +58,6 @@
 			"label": "Basic Set Value (Close)",
 			"description": "Allowable range: 0-99, 255",
 			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 255,
 			"defaultValue": 0,
 			"unsigned": true,
 			"allowManualEntry": false,

package/config/devices/0x0315/wd-100.json

@@ -46,8 +46,8 @@
 			"#": "8",
 			"label": "Remote Dim Step Duration",
 			"description": "Interval between dimming steps when remotely commanded",
-			"unit": "10 ms",
 			"valueSize": 2,
+			"unit": "10 ms",
 			"minValue": 1,
 			"maxValue": 255,
 			"defaultValue": 3
@@ -67,10 +67,10 @@
 			"label": "Step Duration",
 			"description": "Interval between dimming steps",
 			"valueSize": 2,
+			"unit": "10 ms",
 			"minValue": 1,
 			"maxValue": 255,
-			"defaultValue": 3,
-			"unit": "10 ms"
+			"defaultValue": 3
 		}
 	],
 	"compat": {

package/config/devices/0x031e/lzw30-sn.json

@@ -56,8 +56,8 @@
 		{
 			"#": "3",
 			"label": "Auto Off Timer",
-			"unit": "seconds",
 			"valueSize": 2,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 32767,
 			"defaultValue": 0
@@ -227,8 +227,8 @@
 		{
 			"#": "9",
 			"label": "LED Strip Timeout",
-			"unit": "seconds",
 			"valueSize": 1,
+			"unit": "seconds",
 			"defaultValue": 0,
 			"allowManualEntry": false,
 			"options": [
@@ -281,8 +281,8 @@
 		{
 			"#": "10",
 			"label": "Active Power Reports",
-			"unit": "%",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 0,
 			"maxValue": 100,
 			"defaultValue": 10
@@ -290,8 +290,8 @@
 		{
 			"#": "11",
 			"label": "Periodic Power & Energy Reports",
-			"unit": "seconds",
 			"valueSize": 2,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 32767,
 			"defaultValue": 3600
@@ -299,8 +299,8 @@
 		{
 			"#": "12",
 			"label": "Energy Reports",
-			"unit": "%",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 0,
 			"maxValue": 100,
 			"defaultValue": 10

package/config/devices/0x031e/lzw30.json

@@ -55,8 +55,8 @@
 		{
 			"#": "3",
 			"label": "Auto Off Timer",
-			"unit": "Seconds",
 			"valueSize": 2,
+			"unit": "Seconds",
 			"minValue": 0,
 			"maxValue": 32767,
 			"defaultValue": 0

package/config/devices/0x031e/lzw31-sn.json

@@ -18,8 +18,8 @@
 		{
 			"#": "1",
 			"label": "Dimming Speed (Z-Wave)",
-			"unit": "seconds",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 100,
 			"defaultValue": 3,
@@ -33,8 +33,8 @@
 		{
 			"#": "2",
 			"label": "Dimming Speed (Manual)",
-			"unit": "seconds",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 101,
 			"defaultValue": 101,
@@ -52,8 +52,8 @@
 		{
 			"#": "3",
 			"label": "Ramp Rate (Z-Wave)",
-			"unit": "seconds",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 101,
 			"defaultValue": 101,
@@ -71,8 +71,8 @@
 		{
 			"#": "4",
 			"label": "Ramp Rate (Manual)",
-			"unit": "seconds",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 101,
 			"defaultValue": 101,
@@ -91,8 +91,8 @@
 			"#": "5",
 			"$if": "firmwareVersion < 1.57",
 			"label": "Minimum Dim Level",
-			"unit": "%",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 1,
 			"maxValue": 45,
 			"defaultValue": 1
@@ -101,8 +101,8 @@
 			"#": "5",
 			"$if": "firmwareVersion >= 1.57",
 			"label": "Minimum Dim Level",
-			"unit": "%",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 1,
 			"maxValue": 98,
 			"defaultValue": 1
@@ -110,8 +110,8 @@
 		{
 			"#": "6",
 			"label": "Maximum Dim Level",
-			"unit": "%",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 55,
 			"maxValue": 99,
 			"defaultValue": 99
@@ -124,8 +124,8 @@
 		{
 			"#": "8",
 			"label": "Auto-off Timer",
-			"unit": "seconds",
 			"valueSize": 2,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 32767,
 			"defaultValue": 0,
@@ -479,8 +479,8 @@
 		{
 			"#": "17",
 			"label": "LED Indicator: Timeout",
-			"unit": "seconds",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 10,
 			"defaultValue": 3
@@ -495,8 +495,8 @@
 		{
 			"#": "19",
 			"label": "Power & Energy Report Interval",
-			"unit": "seconds",
 			"valueSize": 2,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 32767,
 			"defaultValue": 3600
@@ -505,8 +505,8 @@
 			"#": "20",
 			"$if": "firmwareVersion >= 1.43",
 			"label": "Energy Report Threshold",
-			"unit": "0.01 kWh",
 			"valueSize": 1,
+			"unit": "0.01 kWh",
 			"minValue": 0,
 			"maxValue": 127,
 			"defaultValue": 10
@@ -561,8 +561,8 @@
 			"#": "50",
 			"$if": "firmwareVersion >= 1.49",
 			"label": "Button Delay Period",
-			"unit": "0.1 seconds",
 			"valueSize": 1,
+			"unit": "0.1 seconds",
 			"minValue": 1,
 			"maxValue": 9,
 			"defaultValue": 7