@zwave-js/config 12.0.0-beta.3 → 12.0.0

package/config/devices/0x045a/Z-CM-V01.json

@@ -166,30 +166,30 @@
 			"#": "8",
 			"label": "Low Battery Level Alarm Threshold",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 0,
 			"maxValue": 50,
 			"defaultValue": 10,
-			"unit": "%",
 			"unsigned": true
 		},
 		{
 			"#": "9",
 			"label": "Battery Report Interval",
 			"valueSize": 4,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 2678400,
 			"defaultValue": 3600,
-			"unit": "seconds",
 			"unsigned": true
 		},
 		{
 			"#": "10",
 			"label": "Battery Change Report Threshold",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 0,
 			"maxValue": 50,
 			"defaultValue": 5,
-			"unit": "%",
 			"unsigned": true
 		}
 	],

package/config/devices/0x0460/qnsw-001P16.json

@@ -33,8 +33,6 @@
 			"#": "1",
 			"label": "SW1 Switch Type",
 			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 2,
 			"defaultValue": 2,
 			"unsigned": true,
 			"allowManualEntry": false,
@@ -61,6 +59,7 @@
 		{
 			"#": "19",
 			"label": "O1: Auto-Off Timer",
+			"description": "The timer resets to zero each time the Device receives an ON command",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 32535,
@@ -70,6 +69,7 @@
 		{
 			"#": "20",
 			"label": "O1: Auto-On Timer",
+			"description": "The timer resets to zero each time the Device receives an OFF command",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 32535,
@@ -77,41 +77,37 @@
 			"unsigned": true
 		},
 		{
-			"#": "25",
-			"label": "O1: Auto-On/Off Timer Unit",
+			"#": "23",
+			"label": "O1: Relay Type",
 			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
 			"defaultValue": 0,
 			"unsigned": true,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Seconds",
+					"label": "NO: normally open",
 					"value": 0
 				},
 				{
-					"label": "10 ms",
+					"label": "NC: normally closed",
 					"value": 1
 				}
 			]
 		},
 		{
-			"#": "23",
-			"label": "O1: Relay Type",
+			"#": "25",
+			"label": "O1: Auto-On/Off Timer Unit",
 			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
 			"defaultValue": 0,
 			"unsigned": true,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Normally open (NO)",
+					"label": "Seconds",
 					"value": 0
 				},
 				{
-					"label": "Normally closed (NC)",
+					"label": "10 ms",
 					"value": 1
 				}
 			]
@@ -139,7 +135,7 @@
 		{
 			"#": "91",
 			"label": "Alarm Configuration: Water",
-			"description": "This parameter determines which alarm frames the Device should respond to and how. The parameters consist of 4 bytes, the three most significant bytes are set according to the official Z-Wave protocol specification.",
+			"description": "This parameter determines which alarm frames the Device should respond to and how.",
 			"valueSize": 4,
 			"defaultValue": 0,
 			"unsigned": true,
@@ -162,7 +158,7 @@
 		{
 			"#": "92",
 			"label": "Alarm Configuration: Smoke",
-			"description": "This parameter determines which alarm frames the Device should respond to and how. The parameters consist of 4 bytes, the three most significant bytes are set according to the official Z-Wave protocol specification.0",
+			"description": "This parameter determines which alarm frames the Device should respond to and how.",
 			"valueSize": 4,
 			"defaultValue": 0,
 			"unsigned": true,
@@ -185,7 +181,7 @@
 		{
 			"#": "93",
 			"label": "Alarm Configuration: CO",
-			"description": "This parameter determines which alarm frames the Device should respond to and how. The parameters consist of 4 bytes, the three most significant bytes are set according to the official Z-Wave protocol specification.",
+			"description": "This parameter determines which alarm frames the Device should respond to and how.",
 			"valueSize": 4,
 			"defaultValue": 0,
 			"unsigned": true,
@@ -208,7 +204,7 @@
 		{
 			"#": "94",
 			"label": "Alarm Configuration: Heat",
-			"description": "This parameter determines which alarm frames the Device should respond to and how. The parameters consist of 4 bytes, the three most significant bytes are set according to the official Z-Wave protocol specification.",
+			"description": "This parameter determines which alarm frames the Device should respond to and how.",
 			"valueSize": 4,
 			"defaultValue": 0,
 			"unsigned": true,
@@ -250,6 +246,7 @@
 		{
 			"#": "201",
 			"label": "Serial Number: Part 1",
+			"description": "This parameter contains a part of devices serial number.",
 			"valueSize": 4,
 			"minValue": 0,
 			"maxValue": 2147483647,
@@ -259,6 +256,7 @@
 		{
 			"#": "202",
 			"label": "Serial Number: Part 2",
+			"description": "This parameter contains a part of devices serial number.",
 			"valueSize": 4,
 			"minValue": 0,
 			"maxValue": 2147483647,
@@ -268,6 +266,7 @@
 		{
 			"#": "203",
 			"label": "Serial Number: Part 3",
+			"description": "This parameter contains a part of devices serial number.",
 			"valueSize": 4,
 			"minValue": 0,
 			"maxValue": 2147483647,

package/config/devices/0x5254/zds-210na.json

@@ -49,8 +49,8 @@
 		{
 			"#": "17",
 			"label": "Dimmer time from 0% to max.",
-			"unit": "seconds",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 5,
 			"defaultValue": 3
@@ -58,8 +58,8 @@
 		{
 			"#": "18",
 			"label": "Maximum Dimmer level control",
-			"unit": "percent",
 			"valueSize": 1,
+			"unit": "percent",
 			"minValue": 2,
 			"maxValue": 99,
 			"defaultValue": 99
@@ -67,8 +67,8 @@
 		{
 			"#": "19",
 			"label": "Minimum Dimmer level control",
-			"unit": "percent",
 			"valueSize": 1,
+			"unit": "percent",
 			"minValue": 1,
 			"maxValue": 98,
 			"defaultValue": 13

package/config/devices/0x5254/zts-110.json

@@ -56,19 +56,19 @@
 			"#": "3",
 			"label": "Set Filter Counter",
 			"valueSize": 2,
+			"unit": "hours",
 			"minValue": 500,
 			"maxValue": 4000,
-			"defaultValue": 500,
-			"unit": "hours"
+			"defaultValue": 500
 		},
 		{
 			"#": "4",
 			"label": "Report Filter Counter",
 			"valueSize": 2,
+			"unit": "hours",
 			"minValue": 0,
 			"maxValue": 9999,
 			"defaultValue": 0,
-			"unit": "hours",
 			"readOnly": true
 		},
 		{

package/config/devices/0x5254/zts-500.json

@@ -40,8 +40,8 @@
 			"#": "2",
 			"label": "Swing",
 			"description": "1=1F/0.5C - 4=4F/2C",
-			"unit": "1F / 0.5C",
 			"valueSize": 1,
+			"unit": "1F / 0.5C",
 			"defaultValue": 2,
 			"allowManualEntry": false,
 			"options": [
@@ -67,8 +67,8 @@
 			"#": "3",
 			"label": "Differential",
 			"description": "1=1F/0.5C - 4=4F/2C",
-			"unit": "1F/0.5C",
 			"valueSize": 1,
+			"unit": "1F/0.5C",
 			"defaultValue": 2,
 			"allowManualEntry": false,
 			"options": [
@@ -94,8 +94,8 @@
 			"#": "4",
 			"label": "Dead Band",
 			"description": "3=3F/1.5C - 6=6F/3C",
-			"unit": "1F/0.5C",
 			"valueSize": 1,
+			"unit": "1F/0.5C",
 			"minValue": 3,
 			"maxValue": 6,
 			"defaultValue": 4
@@ -104,8 +104,8 @@
 			"#": "10",
 			"label": "Temp. Sensor Calibration",
 			"description": "Changes Temp. Display (-10=-10F/-5C - 10=+10F/5C)",
-			"unit": "1F/0.5C",
 			"valueSize": 1,
+			"unit": "1F/0.5C",
 			"minValue": -10,
 			"maxValue": 10,
 			"defaultValue": 0

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@zwave-js/config",
-  "version": "12.0.0-beta.3",
+  "version": "12.0.0",
   "description": "zwave-js: configuration files",
   "publishConfig": {
     "access": "public"
@@ -55,8 +55,8 @@
     "test:dirty": "node -r ../../maintenance/esbuild-register.js ../maintenance/src/resolveDirtyTests.ts --run"
   },
   "dependencies": {
-    "@zwave-js/core": "12.0.0-beta.3",
-    "@zwave-js/shared": "12.0.0-beta.1",
+    "@zwave-js/core": "12.0.0",
+    "@zwave-js/shared": "12.0.0",
     "alcalzone-shared": "^4.0.8",
     "ansi-colors": "^4.1.3",
     "fs-extra": "^11.1.1",
@@ -76,7 +76,7 @@
     "@types/sinon": "^10.0.16",
     "@types/xml2js": "^0.4.12",
     "@types/yargs": "^17.0.24",
-    "@zwave-js/maintenance": "12.0.0-beta.3",
+    "@zwave-js/maintenance": "12.0.0",
     "ava": "^5.3.1",
     "comment-json": "^4.2.3",
     "del-cli": "^5.1.0",