@zwave-js/config 12.0.0-beta.3 → 12.0.0

package/config/devices/0x019b/z-water2.json

@@ -0,0 +1,121 @@
+{
+	"manufacturer": "Heatit",
+	"manufacturerId": "0x019b",
+	"label": "Z-WATER2",
+	"description": "Relay Controller",
+	"devices": [
+		{
+			"productType": "0x0004",
+			"productId": "0x020b",
+			"zwaveAllianceId": 4898
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Input 1 Calibration",
+			"valueSize": 1,
+			"unit": "0.1 °C",
+			"minValue": -60,
+			"maxValue": 60,
+			"defaultValue": 0,
+			"unsigned": false
+		},
+		{
+			"#": "2",
+			"label": "Input 2 Calibration",
+			"valueSize": 1,
+			"unit": "0.1 °C",
+			"minValue": -60,
+			"maxValue": 60,
+			"defaultValue": 0,
+			"unsigned": false
+		},
+		{
+			"#": "3",
+			"label": "Temperature Report Interval",
+			"valueSize": 2,
+			"unit": "seconds",
+			"minValue": 30,
+			"maxValue": 65535,
+			"defaultValue": 870,
+			"unsigned": true
+		},
+		{
+			"#": "4",
+			"label": "Temperature Report Hysteresis",
+			"valueSize": 1,
+			"unit": "0.1 °C",
+			"minValue": 1,
+			"maxValue": 100,
+			"defaultValue": 10,
+			"unsigned": true
+		},
+		{
+			"#": "5",
+			"$import": "~/templates/master_template.json#state_after_power_failure_off_on_prev"
+		},
+		{
+			"#": "6",
+			"label": "Output Behavior",
+			"valueSize": 1,
+			"defaultValue": 0,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Normal",
+					"value": 0
+				},
+				{
+					"label": "Inverted",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "7",
+			"label": "Valve Inactivity Exercise",
+			"description": "How long the relays should be turned on for after 30 days of relay inactivity.",
+			"valueSize": 1,
+			"unit": "minutes",
+			"minValue": 0,
+			"maxValue": 30,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "8",
+			"label": "Antenna",
+			"valueSize": 1,
+			"defaultValue": 0,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Internal",
+					"value": 0
+				},
+				{
+					"label": "External",
+					"value": 1
+				}
+			]
+		}
+	],
+	"metadata": {
+		"inclusion": "The primary controller/gateway has a mode for adding devices. Please refer to your primary controller manual on how to set the primary controller in add mode. The device may only be added from the network if the primary controller is in add mode. When the device is removed from the network, it will NOT revert to factory settings. An always listening node must be powered continuously and reside in a fixed position in the installation to secure the routing table. Adding the device within a 2 meter range from the gateway can minimize faults during the Interview process.\n\nStandard (Manual)\nAdd mode is indicated on the device by a blinking green LED. It indicates this for 90 seconds until a timeout occurs, or until the device has been added to the network. Configuration mode can also be cancelled by performing the same procedure used for starting Configuration mode.\nTo start the configuration process, press the reset button 3 times in rapid succession. The LED will light up solid green for 3 seconds if add is successful. The device is now ready for use with default settings.\nNB! When the device is removed from the gateway, the parameters are not reset. To reset the parameters, see Chapter ”Factory reset”.\n\nIf inclusion fails, please perform a ”remove device” process and try again. If inclusion fails again, please see “Factory reset”",
+		"exclusion": "The primary controller/gateway has a mode for removing devices. Please refer to your primary controller manual on how to set the primary controller in remove mode. The device may only be removed from the network if the primary controller is in remove mode. When the device is removed from the network, it will NOT revert to factory settings. An always listening node must be powered continuously and reside in a fixed position in the installation to secure the routing table. \n\nStandard (Manual)\nRemove mode is indicated on the device by a blinking green LED. It indicates this for 90 seconds until a timeout occurs, or until the device has been removed from the network. Configuration mode can also be cancelled by performing the same procedure used for starting Configuration mode.\nTo start the configuration process, press the reset button 3 times in rapid succession. The LED will light up solid green for 3 seconds if remove is successful. The device is now ready for use with default settings.\nNB! When the device is removed from the gateway, the parameters are not reset. To reset the parameters, see Chapter ”Factory reset”",
+		"reset": "Press and hold the reset button. After 3 seconds the LED will start to blink green. After 20 seconds the LED will start blinking green rapidly. You may now release the button. If reset was successful the LED will light up solid green for 3 seconds",
+		"manual": "https://media.heatit.com/2924"
+	}
+}

package/config/devices/0x019b/zm_dimmer.json

@@ -100,11 +100,11 @@
 			"#": "5",
 			"label": "Turn Off Delay",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 60,
 			"defaultValue": 0,
 			"unsigned": true,
-			"unit": "seconds",
 			"options": [
 				{
 					"label": "Instant",
@@ -184,8 +184,8 @@
 		},
 		{
 			"#": "9",
-			"label": "Dimmer Curve",
 			"$import": "~/templates/master_template.json#base_options_nounit",
+			"label": "Dimmer Curve",
 			"unsigned": true,
 			"options": [
 				{

package/config/devices/0x0208/hkzw-dws01.json

@@ -57,8 +57,8 @@
 			"#": "32",
 			"label": "Level for Low Battery Alarm",
 			"description": "Adjust the percent of battery left before a low battery level alarm is sent",
-			"unit": "Battery Percent",
 			"valueSize": 1,
+			"unit": "Battery Percent",
 			"minValue": 10,
 			"maxValue": 50,
 			"defaultValue": 20

package/config/devices/0x0208/hkzw-so01.json

@@ -49,8 +49,8 @@
 			"#": "151",
 			"label": "Threshold of power report",
 			"description": "Power Threshold at which to send meter report",
-			"unit": "W",
 			"valueSize": 2,
+			"unit": "W",
 			"minValue": 0,
 			"maxValue": 65535,
 			"defaultValue": 50,
@@ -59,8 +59,8 @@
 		{
 			"#": "152",
 			"label": "Percentage Threshold of to Trigger Power Report",
-			"unit": "%",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 10,
@@ -70,8 +70,8 @@
 			"#": "171",
 			"label": "Power Report Frequency",
 			"description": "The interval of sending power report to association device (Group Lifeline).",
-			"unit": "Seconds",
 			"valueSize": 4,
+			"unit": "Seconds",
 			"minValue": 5,
 			"maxValue": 2678400,
 			"defaultValue": 30
@@ -80,8 +80,8 @@
 			"#": "172",
 			"label": "Energy Report Frequency",
 			"description": "The interval of sending energy report to association device (Group Lifeline).",
-			"unit": "Seconds",
 			"valueSize": 4,
+			"unit": "Seconds",
 			"minValue": 5,
 			"maxValue": 2678400,
 			"defaultValue": 300
@@ -90,8 +90,8 @@
 			"#": "173",
 			"label": "Voltage Report Frequency",
 			"description": "The interval of sending voltage report to association device (Group Lifeline)",
-			"unit": "Seconds",
 			"valueSize": 4,
+			"unit": "Seconds",
 			"minValue": 0,
 			"maxValue": 2678400,
 			"defaultValue": 0
@@ -100,8 +100,8 @@
 			"#": "174",
 			"label": "Electricity Report Frequency",
 			"description": "Interval for sending electricity report.",
-			"unit": "Seconds",
 			"valueSize": 4,
+			"unit": "Seconds",
 			"minValue": 0,
 			"maxValue": 2678400,
 			"defaultValue": 0

package/config/devices/0x0208/hkzw-so05.json

@@ -81,8 +81,8 @@
 			"#": "151",
 			"label": "Power Report Threshold",
 			"description": "Power threshold for when to send reports to associated devices",
-			"unit": "W",
 			"valueSize": 2,
+			"unit": "W",
 			"minValue": 0,
 			"maxValue": 65535,
 			"defaultValue": 50,
@@ -92,8 +92,8 @@
 			"#": "152",
 			"label": "Power Report Percentage Threshold",
 			"description": "Percentage threshold for when to send report to associated devices",
-			"unit": "%",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 10,
@@ -103,8 +103,8 @@
 			"#": "171",
 			"label": "Power Report Frequence",
 			"description": "The interval of sending power report to association device.",
-			"unit": "Seconds",
 			"valueSize": 4,
+			"unit": "Seconds",
 			"minValue": 5,
 			"maxValue": 2678400,
 			"defaultValue": 30
@@ -113,8 +113,8 @@
 			"#": "172",
 			"label": "Energy Report Frequence",
 			"description": "The interval of sending energy report to association device.",
-			"unit": "Seconds",
 			"valueSize": 4,
+			"unit": "Seconds",
 			"minValue": 5,
 			"maxValue": 2678400,
 			"defaultValue": 300
@@ -123,8 +123,8 @@
 			"#": "173",
 			"label": "Voltage Report Frequency",
 			"description": "The interval of sending voltage report to association device.",
-			"unit": "Seconds",
 			"valueSize": 4,
+			"unit": "Seconds",
 			"minValue": 0,
 			"maxValue": 2678400,
 			"defaultValue": 0
@@ -133,8 +133,8 @@
 			"#": "174",
 			"label": "Electricity Report Frequency",
 			"description": "The interval of sending electricity report to association device.",
-			"unit": "Seconds",
 			"valueSize": 4,
+			"unit": "Seconds",
 			"minValue": 0,
 			"maxValue": 2678400,
 			"defaultValue": 0

package/config/devices/0x0208/hkzw_ms02.json

@@ -121,8 +121,8 @@
 			"#": "18",
 			"label": "Motion Alarm Cancellation Delay",
 			"description": "Period of time after which Motion alarm will be cancelled.",
-			"unit": "seconds",
 			"valueSize": 2,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 65535,
 			"defaultValue": 0,

package/config/devices/0x0208/hkzw_so03.json

@@ -24,9 +24,9 @@
 	"paramInformation": [
 		{
 			"#": "20",
+			"$import": "~/templates/master_template.json#base_enable_disable",
 			"label": "Overload Protection",
 			"description": "Triggered when the current exceeds 16.5A for more than 5 seconds",
-			"$import": "~/templates/master_template.json#base_enable_disable",
 			"defaultValue": 1
 		},
 		{

package/config/devices/0x0208/pid15654.json

@@ -53,8 +53,8 @@
 			"#": "151",
 			"label": "Threshold of power report",
 			"description": "Power Threshold at which to send meter report",
-			"unit": "W",
 			"valueSize": 2,
+			"unit": "W",
 			"minValue": 0,
 			"maxValue": 65535,
 			"defaultValue": 50,
@@ -63,8 +63,8 @@
 		{
 			"#": "152",
 			"label": "Percentage Threshold to Trigger Power Report",
-			"unit": "%",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 10,
@@ -74,8 +74,8 @@
 			"#": "171",
 			"label": "Power Report Frequency",
 			"description": "The interval of sending power report to association device (Group Lifeline).",
-			"unit": "Seconds",
 			"valueSize": 4,
+			"unit": "Seconds",
 			"minValue": 5,
 			"maxValue": 2678400,
 			"defaultValue": 30
@@ -84,8 +84,8 @@
 			"#": "172",
 			"label": "Energy Report Frequency",
 			"description": "The interval of sending energy report to association device (Group Lifeline).",
-			"unit": "Seconds",
 			"valueSize": 4,
+			"unit": "Seconds",
 			"minValue": 5,
 			"maxValue": 2678400,
 			"defaultValue": 300
@@ -94,8 +94,8 @@
 			"#": "173",
 			"label": "Voltage Report Frequency",
 			"description": "The interval of sending voltage report to association device (Group Lifeline)",
-			"unit": "Seconds",
 			"valueSize": 4,
+			"unit": "Seconds",
 			"minValue": 0,
 			"maxValue": 2678400,
 			"defaultValue": 0
@@ -104,8 +104,8 @@
 			"#": "174",
 			"label": "Electricity Report Frequency",
 			"description": "Interval for sending electricity report.",
-			"unit": "Seconds",
 			"valueSize": 4,
+			"unit": "Seconds",
 			"minValue": 0,
 			"maxValue": 2678400,
 			"defaultValue": 0

package/config/devices/0x0214/im-20.json

@@ -40,8 +40,8 @@
 			"#": "3",
 			"label": "Door Sensor Status Report",
 			"description": "Auto report Door/Window status time",
-			"unit": "hours",
 			"valueSize": 1,
+			"unit": "hours",
 			"minValue": 0,
 			"maxValue": 24,
 			"defaultValue": 12

package/config/devices/0x021f/dmms1.json

@@ -47,8 +47,8 @@
 			"#": "2",
 			"label": "Trigger ON Duration",
 			"description": "delay after motion before turning OFF",
-			"unit": "integer",
 			"valueSize": 2,
+			"unit": "integer",
 			"minValue": 5,
 			"maxValue": 600,
 			"defaultValue": 30

package/config/devices/0x021f/dmof1.json

@@ -51,8 +51,8 @@
 			"#": "2",
 			"label": "METER_REPORT",
 			"description": "The time between meter reports.",
-			"unit": "seconds",
 			"valueSize": 2,
+			"unit": "seconds",
 			"minValue": 1,
 			"maxValue": 65535,
 			"defaultValue": 300,
@@ -62,8 +62,8 @@
 			"#": "3",
 			"label": "Set \"Overload\" Current level",
 			"description": "Maximum current the plug will pass",
-			"unit": "amps",
 			"valueSize": 1,
+			"unit": "amps",
 			"minValue": 1,
 			"maxValue": 16,
 			"defaultValue": 13
@@ -72,8 +72,8 @@
 			"#": "4",
 			"label": "Set \"Alert\" Current Level",
 			"description": "Current level warning threshold",
-			"unit": "amps",
 			"valueSize": 1,
+			"unit": "amps",
 			"minValue": 1,
 			"maxValue": 16,
 			"defaultValue": 12
@@ -100,8 +100,8 @@
 			"#": "6",
 			"label": "Current change METER_REPORT level",
 			"description": "Report of relative change in current flow",
-			"unit": "%",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 1,
 			"maxValue": 64,
 			"defaultValue": 5
@@ -146,8 +146,8 @@
 			"#": "9",
 			"label": "Set Timer Time Interval",
 			"description": "Time before auto shut off if on.",
-			"unit": "minute(s)",
 			"valueSize": 4,
+			"unit": "minute(s)",
 			"minValue": 1,
 			"maxValue": 65535,
 			"defaultValue": 96

package/config/devices/0x021f/dmws1.json

@@ -37,8 +37,8 @@
 			"#": "1",
 			"label": "Total Alarm Duration",
 			"description": "Total time the Leak Sensor will beep and light its LED in the event of a leak",
-			"unit": "Minutes",
 			"valueSize": 1,
+			"unit": "Minutes",
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 120,
@@ -48,8 +48,8 @@
 			"#": "2",
 			"label": "Mute Time",
 			"description": "Quiet time between each Reminder Alarm",
-			"unit": "Minutes",
 			"valueSize": 1,
+			"unit": "Minutes",
 			"minValue": 1,
 			"maxValue": 255,
 			"defaultValue": 1,
@@ -59,8 +59,8 @@
 			"#": "3",
 			"label": "Initial Alarm",
 			"description": "Time the Leak Sensor beeps before it is muted",
-			"unit": "Seconds",
 			"valueSize": 1,
+			"unit": "Seconds",
 			"minValue": 10,
 			"maxValue": 255,
 			"defaultValue": 60,
@@ -70,8 +70,8 @@
 			"#": "4",
 			"label": "Reminder Alarm",
 			"description": "Length of each beep after the Initial Alarm",
-			"unit": "Seconds",
 			"valueSize": 1,
+			"unit": "Seconds",
 			"minValue": 5,
 			"maxValue": 255,
 			"defaultValue": 5,

package/config/devices/0x022c/osr-02.json

@@ -18,8 +18,8 @@
 		{
 			"#": "1",
 			"label": "Battery Report Period",
-			"unit": "15 minutes",
 			"valueSize": 1,
+			"unit": "15 minutes",
 			"minValue": 1,
 			"maxValue": 127,
 			"defaultValue": 24,

package/config/devices/0x0234/zdb5100.json

@@ -342,8 +342,8 @@
 			"#": "17",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "Button 1 - Timer",
-			"unit": "seconds",
 			"valueSize": 2,
+			"unit": "seconds",
 			"maxValue": 43200,
 			"defaultValue": 300
 		},
@@ -397,8 +397,8 @@
 			"#": "22[0xff]",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "LED Time For Button 1 (On): Blinking",
-			"unit": "100 ms",
 			"valueSize": 4,
+			"unit": "100 ms",
 			"defaultValue": 0
 		},
 		{
@@ -423,8 +423,8 @@
 			"#": "23[0xff]",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "LED Time For Button 1 (Off): Blinking",
-			"unit": "100 ms",
 			"valueSize": 4,
+			"unit": "100 ms",
 			"defaultValue": 0
 		},
 		{
@@ -436,8 +436,8 @@
 			"#": "25",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "Button 2 - Timer",
-			"unit": "seconds",
 			"valueSize": 2,
+			"unit": "seconds",
 			"maxValue": 43200,
 			"defaultValue": 300
 		},
@@ -491,8 +491,8 @@
 			"#": "30[0xff]",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "LED Time For Button 2 (On): Blinking",
-			"unit": "100 ms",
 			"valueSize": 4,
+			"unit": "100 ms",
 			"defaultValue": 0
 		},
 		{
@@ -517,8 +517,8 @@
 			"#": "31[0xff]",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "LED Time For Button 2 (Off) Blinking",
-			"unit": "100 ms",
 			"valueSize": 4,
+			"unit": "100 ms",
 			"defaultValue": 0
 		},
 		{
@@ -530,8 +530,8 @@
 			"#": "33",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "Button 3 - Timer",
-			"unit": "seconds",
 			"valueSize": 2,
+			"unit": "seconds",
 			"maxValue": 43200,
 			"defaultValue": 300
 		},
@@ -679,8 +679,8 @@
 			"#": "46[0xff]",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "LED Time For Button 4 (On): Blinking",
-			"unit": "100 ms",
-			"valueSize": 4
+			"valueSize": 4,
+			"unit": "100 ms"
 		},
 		{
 			"#": "47[0xff000000]",
@@ -704,8 +704,8 @@
 			"#": "47[0xff]",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "LED Time For Button 4 (Off): Blinking",
-			"unit": "100 ms",
 			"valueSize": 4,
+			"unit": "100 ms",
 			"defaultValue": 0
 		}
 	],

package/config/devices/0x0234/zdb5400.json

@@ -306,8 +306,8 @@
 			"#": "22[0xff]",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "LED Time For Button 1 (On): Blinking",
-			"unit": "100 ms",
 			"valueSize": 4,
+			"unit": "100 ms",
 			"defaultValue": 0
 		},
 		{
@@ -332,8 +332,8 @@
 			"#": "23[0xff]",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "LED Time For Button 1 (Off): Blinking",
-			"unit": "100 ms",
 			"valueSize": 4,
+			"unit": "100 ms",
 			"defaultValue": 0
 		},
 		{
@@ -345,8 +345,8 @@
 			"#": "25",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "Button 2 - Timer",
-			"unit": "seconds",
 			"valueSize": 2,
+			"unit": "seconds",
 			"maxValue": 43200,
 			"defaultValue": 300
 		},
@@ -400,8 +400,8 @@
 			"#": "30[0xff]",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "LED Time For Button 2 (On): Blinking",
-			"unit": "100 ms",
 			"valueSize": 4,
+			"unit": "100 ms",
 			"defaultValue": 0
 		},
 		{
@@ -426,8 +426,8 @@
 			"#": "31[0xff]",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "LED Time For Button 2 (Off) Blinking",
-			"unit": "100 ms",
 			"valueSize": 4,
+			"unit": "100 ms",
 			"defaultValue": 0
 		},
 		{
@@ -439,8 +439,8 @@
 			"#": "33",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "Button 3 - Timer",
-			"unit": "seconds",
 			"valueSize": 2,
+			"unit": "seconds",
 			"maxValue": 43200,
 			"defaultValue": 300
 		},
@@ -494,8 +494,8 @@
 			"#": "38[0xff]",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "LED Time For Button 3 (On): Blinking",
-			"unit": "100 ms",
 			"valueSize": 4,
+			"unit": "100 ms",
 			"defaultValue": 0
 		},
 		{
@@ -520,8 +520,8 @@
 			"#": "39[0xff]",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "LED Time For Button 3 (Off): Blinking",
-			"unit": "100 ms",
 			"valueSize": 4,
+			"unit": "100 ms",
 			"defaultValue": 0
 		},
 		{
@@ -533,8 +533,8 @@
 			"#": "41",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "Button 4 - Timer",
-			"unit": "seconds",
 			"valueSize": 2,
+			"unit": "seconds",
 			"maxValue": 43200,
 			"defaultValue": 300
 		},
@@ -588,8 +588,8 @@
 			"#": "46[0xff]",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "LED Time For Button 4 (On): Blinking",
-			"unit": "100 ms",
-			"valueSize": 4
+			"valueSize": 4,
+			"unit": "100 ms"
 		},
 		{
 			"#": "47[0xff000000]",
@@ -613,8 +613,8 @@
 			"#": "47[0xff]",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
 			"label": "LED Time For Button 4 (Off): Blinking",
-			"unit": "100 ms",
 			"valueSize": 4,
+			"unit": "100 ms",
 			"defaultValue": 0
 		}
 	],