@zwave-js/config 11.4.0 → 11.4.2

package/config/devices/0x0063/55259_zw4002.json

@@ -40,7 +40,7 @@
 		"treatBasicSetAsEvent": true,
 		"commandClasses": {
 			"remove": {
-				"0x6c": {
+				"Supervision": {
 					// The device does not support supervision although it is mandatory for the device type
 					"endpoints": "*"
 				}

package/config/devices/0x0086/dsa03202.json

@@ -86,7 +86,7 @@
 	"compat": {
 		"commandClasses": {
 			"add": {
-				"0x84": {
+				"Wake Up": {
 					// To fix issue #1536
 					"isSupported": true,
 					"version": 1

package/config/devices/0x0109/zd2102-5.json

@@ -43,7 +43,7 @@
 	"compat": {
 		"commandClasses": {
 			"add": {
-				"0x20": {
+				"Basic": {
 					// This device should send Notification Reports, but they seem to get lost often
 					// Basic Set comes through
 					"isSupported": true

package/config/devices/0x010f/fgbs001.json

@@ -321,7 +321,7 @@
 			"remove": {
 				// Alarm Sensor CC is reported as supported, but we either get no response
 				// or the supported sensor types are incorrectly encoded
-				"0x9c": {
+				"Alarm Sensor": {
 					"endpoints": "*"
 				}
 			}

package/config/devices/0x010f/fgt001.json

@@ -144,7 +144,7 @@
 		// Hide CCs from root endpoint that are duplicated on the manually preserved endpoint 1
 		"commandClasses": {
 			"remove": {
-				"0x80": {
+				"Battery": {
 					"endpoints": [0]
 				}
 			}

package/config/devices/0x0115/zme_ft.json

@@ -15,16 +15,15 @@
 	},
 	"associations": {
 		"1": {
-			"label": "Group 1",
-			"description": "Unsolicited notifications about thermostat mode and setpoint temperature changes",
+			"label": "Lifeline",
 			"maxNodes": 10
 		}
 	},
 	"paramInformation": [
 		{
 			"#": "1",
-			"label": "Boost Dry mode duration",
-			"unit": "sec",
+			"label": "Boost Dry Mode Duration",
+			"unit": "seconds",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 1800,
@@ -32,7 +31,7 @@
 		},
 		{
 			"#": "2",
-			"label": "Button mode",
+			"label": "Button Mode",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,
@@ -53,7 +52,7 @@
 		},
 		{
 			"#": "3",
-			"label": "Basic mode",
+			"label": "Basic Mode",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,
@@ -82,7 +81,7 @@
 		},
 		{
 			"#": "4",
-			"label": "Temperature control interval",
+			"label": "Temperature Control Interval",
 			"unit": "sec",
 			"valueSize": 1,
 			"minValue": 1,
@@ -91,8 +90,8 @@
 		},
 		{
 			"#": "5",
-			"label": "Maximum allowed temperature deviation",
-			"unit": "in 0.1 C",
+			"label": "Maximum Temperature Deviation",
+			"unit": "0.1 °C",
 			"valueSize": 1,
 			"minValue": 1,
 			"maxValue": 60,
@@ -100,8 +99,8 @@
 		},
 		{
 			"#": "6",
-			"label": "Maximal allowed temperature",
-			"unit": "degree Celsus",
+			"label": "Maximum Temperature",
+			"unit": "°C",
 			"valueSize": 1,
 			"minValue": 20,
 			"maxValue": 55,
@@ -109,13 +108,37 @@
 		},
 		{
 			"#": "10",
-			"label": "Typical click timeout",
-			"description": "Typical time used to differentiate click from hold",
-			"unit": "in 10ms",
+			"label": "Typical Click Timeout",
+			"description": "Used to differentiate click from hold",
+			"unit": "10 ms",
 			"valueSize": 1,
 			"minValue": 1,
 			"maxValue": 100,
 			"defaultValue": 50
 		}
-	]
+	],
+	"compat": {
+		"overrideQueries": {
+			// The device does not report Off as a supported thermostat mode
+			"Thermostat Mode": [
+				{
+					"method": "getSupportedModes",
+					"result": [0, 1, 7, 11], // Off / Heat / Furnace / Energy Heat
+					"persistValues": {
+						"supportedModes": [0, 1, 7, 11]
+					},
+					"extendMetadata": {
+						"thermostatMode": {
+							"states": {
+								"Off": 0,
+								"Heat": 1,
+								"Furnace": 7,
+								"Energy heat": 11
+							}
+						}
+					}
+				}
+			]
+		}
+	}
 }

package/config/devices/0x0118/tz69.json

@@ -110,7 +110,7 @@
 		"commandClasses": {
 			"add": {
 				// This device is a binary switch, but claims not to support the Binary Switch CC
-				"0x25": {
+				"Binary Switch": {
 					"isSupported": true
 				}
 			}

package/config/devices/0x011a/zwn-rsm2.json

@@ -66,7 +66,7 @@
 			"add": {
 				// The device needs a multi channel lifeline association (target endpoint 0),
 				// but only reports support for V2, which doesn't allow this.
-				"0x8e": {
+				"Multi Channel Association": {
 					"version": 3
 				}
 			}

package/config/devices/0x0129/yale_smart_door_lock_z-wave_module.json

@@ -69,13 +69,32 @@
 			"remove": {
 				// At least in FW 33.16 the lock always responds with Supervision session ID 0,
 				// which means Z-Wave JS cannot map the response to the request
-				"0x6c": {
+				"Supervision": {
 					"endpoints": "*"
 				}
 			}
 		},
 		// The lock is sometimes a bit slow to respond
-		"reportTimeout": 5000
+		"reportTimeout": 5000,
+		// The lock claims to have 20 schedule slots per user,
+		// but it has 20 users with 1 schedule slot each
+		"overrideQueries": {
+			"Schedule Entry Lock": [
+				{
+					"method": "getNumSlots",
+					"result": {
+						"numWeekDaySlots": 0,
+						"numYearDaySlots": 0,
+						"numDailyRepeatingSlots": 1
+					},
+					"persistValues": {
+						"numWeekDaySlots": 0,
+						"numYearDaySlots": 0,
+						"numDailyRepeatingSlots": 1
+					}
+				}
+			]
+		}
 	},
 	"metadata": {
 		"inclusion": "Put the Z-Wave controller into add mode\n\nEnter the Master code on the lock, followed by #\n\nPress the 4 button, followed by #\n\nPress the 1 button followed by #\n\nRefer to the operation manual of the Z-Wave controller to complete the add/inclusion process\n\nFor more information on this please visit:\nwww.yale.co.uk/smart-living",

package/config/devices/0x0131/rgbwe2.json

@@ -77,5 +77,20 @@
 				}
 			]
 		}
-	]
+	],
+	"compat": {
+		"overrideQueries": {
+			"Color Switch": [
+				// The device supports 5 color channels (Warm/Cold white, RGB)
+				// but does not advertise support for blue
+				{
+					"method": "getSupported",
+					"result": [0, 1, 2, 3, 4],
+					"persistValues": {
+						"supportedColorComponents": [0, 1, 2, 3, 4]
+					}
+				}
+			]
+		}
+	}
 }

package/config/devices/0x0152/gr-b3-3.json

@@ -34,7 +34,7 @@
 	"compat": {
 		"commandClasses": {
 			"add": {
-				"0x60": {
+				"Multi Channel": {
 					// This device has 3 channels, but it responds to the CC version request with 0
 					"isSupported": true,
 					"version": 2

package/config/devices/0x0154/pope700168.json

@@ -102,7 +102,7 @@
 				// The device uses Basic Set commands to report rain.
 				// We don't set up an association in group 2 or 3 by default, but if a user does,
 				// this is needed or the Basic CC will be hidden
-				"0x20": {
+				"Basic": {
 					"isSupported": true
 				}
 			}

package/config/devices/0x0157/ev100.json

@@ -18,7 +18,7 @@
 		// The device supports Battery CC, despite the Version query telling otherwise
 		"commandClasses": {
 			"add": {
-				"0x80": {
+				"Battery": {
 					"isSupported": true,
 					"version": 1
 				}

package/config/devices/0x0159/zmnhaa.json

@@ -148,12 +148,12 @@
 	"compat": {
 		"commandClasses": {
 			"add": {
-				"0x72": {
+				"Manufacturer Specific": {
 					// Manufacturer Specific CC is supported, but comes back as version 0
 					"version": 1,
 					"isSupported": true
 				},
-				"0x85": {
+				"Association": {
 					// Association CC is supported, but comes back as version 0
 					"version": 1,
 					"isSupported": true

package/config/devices/0x0159/zmnhda.json

@@ -174,8 +174,8 @@
 	"compat": {
 		"commandClasses": {
 			"add": {
-				// The device lists Binary Switch CC as supported, but then responds with a version of 0
-				"0x85": {
+				// The device lists Association CC as supported, but then responds with a version of 0
+				"Association": {
 					"isSupported": true
 				}
 			}

package/config/devices/0x015f/mh-c221.json

@@ -40,7 +40,7 @@
 	"compat": {
 		"commandClasses": {
 			"add": {
-				"0x26": {
+				"Multilevel Switch": {
 					// This is a roller shutter, but it responds to the CC version request with 0
 					"isSupported": true,
 					"version": 1

package/config/devices/0x015f/mh-c421.json

@@ -204,7 +204,7 @@
 	"compat": {
 		"commandClasses": {
 			"add": {
-				"0x26": {
+				"Multilevel Switch": {
 					// This is a roller shutter, but it responds to the CC version request with 0
 					"isSupported": true,
 					"version": 1

package/config/devices/0x015f/{mh-s220.json → mh-s220_0.0-3.1.json}

@@ -15,7 +15,7 @@
 	],
 	"firmwareVersion": {
 		"min": "0.0",
-		"max": "255.255"
+		"max": "3.1"
 	},
 	"associations": {
 		"1": {

package/config/devices/0x015f/mh-s220_3.2.json

@@ -0,0 +1,270 @@
+{
+	"manufacturer": "McoHome Technology Co., Ltd.",
+	"manufacturerId": "0x015f",
+	"label": "MH-S220",
+	"description": "Micro Switch",
+	"devices": [
+		{
+			"productType": "0x2201",
+			"productId": "0x1252"
+		},
+		{
+			"productType": "0x2201",
+			"productId": "0x7202"
+		}
+	],
+	"firmwareVersion": {
+		"min": "3.2",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Switch 1",
+			"maxNodes": 5
+		},
+		"3": {
+			"label": "Switch 2",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"$import": "~/templates/master_template.json#state_after_power_failure_off_prev"
+		},
+		{
+			"#": "2",
+			"label": "External Switch Type",
+			"valueSize": 1,
+			"defaultValue": 1,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Momentary buttons",
+					"value": 0
+				},
+				{
+					"label": "Toggle switches",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "3",
+			"label": "Toggle Switch Behavior",
+			"valueSize": 1,
+			"defaultValue": 1,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Without specified on/off position",
+					"value": 0
+				},
+				{
+					"label": "With specified on/off position",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "5",
+			"label": "Auto-Off Timer",
+			"valueSize": 2,
+			"minValue": 0,
+			"maxValue": 65535,
+			"defaultValue": 0,
+			"unit": "seconds",
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "4",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Auto-Off Timer: Manual Operation",
+			"description": "Allow manually turning off the device when the auto-off timer is active",
+			"defaultValue": 1
+		},
+		{
+			"#": "6",
+			"label": "All On / All Off",
+			"valueSize": 1,
+			"defaultValue": 0,
+			"allowManualEntry": false,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Do not allow all-on and all-off",
+					"value": 0
+				},
+				{
+					"label": "Do not allow all-on / Allow all-off",
+					"value": 1
+				},
+				{
+					"label": "Allow all-on / Do not allow all-off",
+					"value": 2
+				},
+				{
+					"label": "Allow all-on and all-off",
+					"value": 255
+				}
+			]
+		},
+		{
+			"#": "8",
+			"label": "Switch 1: Report to Association Group 2",
+			"valueSize": 1,
+			"defaultValue": 0,
+			"allowManualEntry": false,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Report both on/off",
+					"value": 0
+				},
+				{
+					"label": "Report on only",
+					"value": 1
+				},
+				{
+					"label": "Report off only",
+					"value": 2
+				},
+				{
+					"label": "Report disabled",
+					"value": 255
+				}
+			]
+		},
+		{
+			"#": "9",
+			"label": "Switch 2: Report Type",
+			"description": "Scene Activation will be sent to the controller, Basic Set to group 3.",
+			"valueSize": 1,
+			"defaultValue": 1,
+			"allowManualEntry": false,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Scene Activation and Basic Set",
+					"value": 0
+				},
+				{
+					"label": "Scene Activation",
+					"value": 1
+				},
+				{
+					"label": "Basic Set",
+					"value": 2
+				},
+				{
+					"label": "Disable",
+					"value": 255
+				}
+			]
+		},
+		{
+			"#": "10",
+			"label": "Switch 2: Report to Association Group 3",
+			"valueSize": 1,
+			"defaultValue": 1,
+			"allowManualEntry": false,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Report both on/off",
+					"value": 0
+				},
+				{
+					"label": "Report on only",
+					"value": 1
+				},
+				{
+					"label": "Report off only",
+					"value": 2
+				},
+				{
+					"label": "Disable",
+					"value": 255
+				}
+			]
+		},
+		{
+			"#": "11",
+			"label": "Switch S2: Scene ID (Single Click)",
+			"description": "Will be sent to the controller.",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "12",
+			"label": "Switch S2: Scene ID (Double Click)",
+			"description": "Will be sent to the controller.",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "13",
+			"label": "Switch S2: Scene ID (Hold)",
+			"description": "Momentary buttons only. Will be sent to the controller.",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "255",
+			"label": "Factory Reset",
+			"valueSize": 1,
+			"defaultValue": 0,
+			"unsigned": true,
+			"writeOnly": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Idle",
+					"value": 0
+				},
+				{
+					"label": "Factory Reset",
+					"value": 85
+				}
+			]
+		}
+	]
+}

package/config/devices/0x017c/heatapp_floor.json

@@ -2,7 +2,7 @@
 	"manufacturer": "EbV",
 	"manufacturerId": "0x017c",
 	"label": "heatapp! floor",
-	"description": "heatapp! floor is a controller for thermal actuators in underfloor heating installations and is part of the heatapp! system, providing individual circ",
+	"description": "8-channel underfloor heating controller",
 	"devices": [
 		{
 			"productType": "0x0006",
@@ -16,7 +16,7 @@
 	"paramInformation": [
 		{
 			"#": "1",
-			"label": "Missing Radio Link time",
+			"label": "Missing Radio Link Time",
 			"unit": "minutes",
 			"valueSize": 1,
 			"minValue": 10,
@@ -26,8 +26,7 @@
 		},
 		{
 			"#": "2",
-			"label": "Relay type",
-			"description": "0 normal open, 1 normal close, 2 switching",
+			"label": "Relay Type",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,
@@ -46,5 +45,18 @@
 				}
 			]
 		}
-	]
+	],
+	"compat": {
+		"overrideQueries": {
+			// The device has 8 sequential endpoints, but responds with random
+			// garbage when queried for its endpoint indizes
+			"Multi Channel": [
+				{
+					"method": "findEndpoints",
+					"result": [1, 2, 3, 4, 5, 6, 7, 8]
+					// No need to persist values, this is done as part of the interview
+				}
+			]
+		}
+	}
 }

package/config/devices/0x0184/wd-100.json

@@ -43,7 +43,7 @@
 	"compat": {
 		"commandClasses": {
 			"remove": {
-				"0x6c": {
+				"Supervision": {
 					// The device does not support supervision although it is mandatory for the device type
 					"endpoints": "*"
 				}

package/config/devices/0x018c/pm-140-zw.json

@@ -23,7 +23,7 @@
 		"commandClasses": {
 			"remove": {
 				// The device seems to report support for Supervision but ignores the commands
-				"0x6c": {
+				"Supervision": {
 					"endpoints": "*"
 				}
 			}

package/config/devices/0x018c/pm-240-zw.json

@@ -23,7 +23,7 @@
 		"commandClasses": {
 			"remove": {
 				// The device seems to report support for Supervision but ignores the commands
-				"0x6c": {
+				"Supervision": {
 					"endpoints": "*"
 				}
 			}

package/config/devices/0x018c/pm-340-zw.json

@@ -23,7 +23,7 @@
 		"commandClasses": {
 			"remove": {
 				// The device seems to report support for Supervision but ignores the commands
-				"0x6c": {
+				"Supervision": {
 					"endpoints": "*"
 				}
 			}