@zwave-js/config 11.4.0 → 11.4.2

package/config/devices/0x0005/pe653.json

@@ -15,45 +15,464 @@
 	},
 	"paramInformation": [
 		{
-			"#": "2",
-			"label": "Fireman Timeout",
-			"description": "Minutes that pump will continue to run after heater shutoff",
-			"valueSize": 1,
+			"#": "1[0x02]",
+			"$import": "~/templates/master_template.json#base_options_nounit",
+			"label": "Installed Pump Type",
+			"valueSize": 2,
+			"options": [
+				{
+					"label": "One Speed",
+					"value": 0
+				},
+				{
+					"label": "Two Speed",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "1[0x01]",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Booster (Cleaner) Pump Installed",
+			"valueSize": 2
+		},
+		{
+			"#": "1[0xff00]",
+			"label": "Booster (Cleaner) Pump Operation Mode",
+			"description": "Set the filter pump mode to use when the booster (cleaner) pump is running.",
+			"valueSize": 2,
+			"defaultValue": 1,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 1
+				},
+				{
+					"label": "Circuit 1",
+					"value": 2
+				},
+				{
+					"label": "VSP Speed 1",
+					"value": 3
+				},
+				{
+					"label": "VSP Speed 2",
+					"value": 4
+				},
+				{
+					"label": "VSP Speed 3",
+					"value": 5
+				},
+				{
+					"label": "VSP Speed 4",
+					"value": 6
+				}
+			]
+		},
+		{
+			"#": "2[0xff00]",
+			"label": "Heater Cooldown Period",
+			"valueSize": 2,
+			"minValue": -1,
+			"maxValue": 15,
+			"defaultValue": -1,
 			"unit": "minutes",
+			"options": [
+				{
+					"label": "No heater installed",
+					"value": -1
+				},
+				{
+					"label": "Heater installed with no cooldown",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "2[0x01]",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Heater Safety Setting",
+			"description": "Prevent the heater from turning on while the pump is off.",
+			"valueSize": 2
+		},
+		{
+			"#": "3[0xff000000]",
+			"label": "Water Temperature Offset",
+			"valueSize": 4,
+			"minValue": -5,
+			"maxValue": 5,
+			"unit": "°F",
+			"defaultValue": 0
+		},
+		{
+			"#": "3[0xff0000]",
+			"$import": "#paramInformation/3[0xff000000]",
+			"label": "Air/Freeze Temperature Offset"
+		},
+		{
+			"#": "3[0xff00]",
+			"$import": "#paramInformation/3[0xff000000]",
+			"label": "Solar Temperature Offset"
+		},
+		{
+			"#": "22",
+			"$import": "~/templates/master_template.json#base_options_nounit",
+			"label": "Pool/Spa Configuration",
+			"options": [
+				{
+					"label": "Pool",
+					"value": 0
+				},
+				{
+					"label": "Spa",
+					"value": 1
+				},
+				{
+					"label": "Both",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "23",
+			"$import": "~/templates/master_template.json#base_options_nounit",
+			"label": "Spa Mode Pump Speed",
+			"description": "Requires pool/spa configuration.",
+			"defaultValue": 1,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 1
+				},
+				{
+					"label": "Circuit 1",
+					"value": 2
+				},
+				{
+					"label": "VSP Speed 1",
+					"value": 3
+				},
+				{
+					"label": "VSP Speed 2",
+					"value": 4
+				},
+				{
+					"label": "VSP Speed 3",
+					"value": 5
+				},
+				{
+					"label": "VSP Speed 4",
+					"value": 6
+				}
+			]
+		},
+		{
+			"#": "32",
+			"label": "Variable Speed Pump - Speed 1",
+			"description": "Requires connected variable speed pump.",
+			"valueSize": 2,
+			"unit": "RPM",
+			"minValue": 400,
+			"maxValue": 3450,
+			"defaultValue": 750,
+			"unsigned": true
+		},
+		{
+			"#": "33",
+			"$import": "#paramInformation/32",
+			"label": "Variable Speed Pump - Speed 2",
+			"defaultValue": 1500
+		},
+		{
+			"#": "34",
+			"$import": "#paramInformation/32",
+			"label": "Variable Speed Pump - Speed 3",
+			"defaultValue": 2350
+		},
+		{
+			"#": "35",
+			"$import": "#paramInformation/32",
+			"label": "Variable Speed Pump - Speed 4",
+			"defaultValue": 3110
+		},
+		{
+			"#": "49",
+			"$import": "#paramInformation/32",
+			"label": "Variable Speed Pump - Max Speed",
+			"defaultValue": 3450
+		},
+		{
+			"#": "50[0xff000000]",
+			"$import": "~/templates/master_template.json#base_options_nounit",
+			"label": "Freeze Protection: Temperature",
+			"valueSize": 4,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				},
+				{
+					"label": "40 °F",
+					"value": 40
+				},
+				{
+					"label": "41 °F",
+					"value": 41
+				},
+				{
+					"label": "42 °F",
+					"value": 42
+				},
+				{
+					"label": "43 °F",
+					"value": 43
+				},
+				{
+					"label": "44 °F",
+					"value": 44
+				}
+			]
+		},
+		{
+			"#": "50[0x010000]",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Freeze Protection: Turn On Circuit 1",
+			"valueSize": 4
+		},
+		{
+			"#": "50[0x020000]",
+			"$import": "#paramInformation/50[0x010000]",
+			"label": "Freeze Protection: Turn On Circuit 2"
+		},
+		{
+			"#": "50[0x040000]",
+			"$import": "#paramInformation/50[0x010000]",
+			"label": "Freeze Protection: Turn On Circuit 3"
+		},
+		{
+			"#": "50[0x080000]",
+			"$import": "#paramInformation/50[0x010000]",
+			"label": "Freeze Protection: Turn On Circuit 4"
+		},
+		{
+			"#": "50[0x100000]",
+			"$import": "#paramInformation/50[0x010000]",
+			"label": "Freeze Protection: Turn On Circuit 5"
+		},
+		{
+			"#": "50[0xff00]",
+			"label": "Freeze Protection: Turn On VSP Speed",
+			"description": "Requires variable speed pump and connected air/freeze sensor.",
+			"valueSize": 4,
 			"minValue": 0,
-			"maxValue": 255,
+			"maxValue": 5,
+			"defaultValue": 0,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "None",
+					"value": 0
+				},
+				{
+					"label": "VSP Speed 1",
+					"value": 2
+				},
+				{
+					"label": "VSP Speed 2",
+					"value": 3
+				},
+				{
+					"label": "VSP Speed 3",
+					"value": 4
+				},
+				{
+					"label": "VSP Speed 4",
+					"value": 5
+				}
+			]
+		},
+		{
+			"#": "50[0x80]",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Freeze Protection: Turn On Heater",
+			"description": "Requires heater and connected air/freeze sensor.",
+			"valueSize": 4
+		},
+		{
+			"#": "50[0x7f]",
+			"label": "Freeze Protection: Pool/Spa Cycle Time",
+			"description": "Requires pool/spa configuration and connected air/freeze sensor.",
+			"valueSize": 4,
+			"unit": "minutes",
+			"minValue": 0,
+			"maxValue": 30,
 			"defaultValue": 0,
 			"unsigned": true
 		},
 		{
-			"#": "22",
-			"label": "Pool - Spa Mode",
-			"description": "Controller Mode",
-			"valueSize": 1,
-			"unit": "Decimal",
+			"#": "4",
+			"label": "Circuit 1 Schedule 1",
+			"description": "Start time (first two bytes, little endian) and stop time (last two bytes, little endian) of schedule in minutes past midnight, e.g. 12:05am (0x0500) to 3:00pm (0x8403) is entered as 83919875. Set to 4294967295 (0xffffffff) to disable.",
+			"valueSize": 4,
 			"minValue": 0,
-			"maxValue": 2,
-			"defaultValue": 0
+			"maxValue": 4294967295,
+			"defaultValue": 4294967295,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 4294967295
+				}
+			]
 		},
 		{
-			"#": "1[0xff]",
-			"label": "Booster/Cleaner Pump Operation Mode",
-			"description": "Which circuit the booster/cleaner pump resides on",
-			"valueSize": 2,
-			"unit": "Decimal",
-			"minValue": 1,
-			"maxValue": 6,
-			"defaultValue": 1
+			"#": "5",
+			"$import": "#paramInformation/4",
+			"label": "Circuit 1 Schedule 2",
+			"description": "Refer to parameter 4 for usage."
 		},
 		{
-			"#": "1[0xff00]",
-			"label": "Pump Type Operation Mode",
-			"description": "Which type of pump is being used",
-			"valueSize": 2,
-			"unit": "Decimal",
-			"minValue": 0,
-			"maxValue": 7,
-			"defaultValue": 0
+			"#": "6",
+			"$import": "#paramInformation/5",
+			"label": "Circuit 1 Schedule 3"
+		},
+		{
+			"#": "7",
+			"$import": "#paramInformation/5",
+			"label": "Circuit 2 Schedule 1"
+		},
+		{
+			"#": "8",
+			"$import": "#paramInformation/5",
+			"label": "Circuit 2 Schedule 2"
+		},
+		{
+			"#": "9",
+			"$import": "#paramInformation/5",
+			"label": "Circuit 2 Schedule 3"
+		},
+		{
+			"#": "10",
+			"$import": "#paramInformation/5",
+			"label": "Circuit 3 Schedule 1"
+		},
+		{
+			"#": "11",
+			"$import": "#paramInformation/5",
+			"label": "Circuit 3 Schedule 2"
+		},
+		{
+			"#": "12",
+			"$import": "#paramInformation/5",
+			"label": "Circuit 3 Schedule 3"
+		},
+		{
+			"#": "13",
+			"$import": "#paramInformation/5",
+			"label": "Circuit 4 Schedule 1"
+		},
+		{
+			"#": "14",
+			"$import": "#paramInformation/5",
+			"label": "Circuit 4 Schedule 2"
+		},
+		{
+			"#": "15",
+			"$import": "#paramInformation/5",
+			"label": "Circuit 4 Schedule 3"
+		},
+		{
+			"#": "16",
+			"$import": "#paramInformation/5",
+			"label": "Circuit 5 Schedule 1"
+		},
+		{
+			"#": "17",
+			"$import": "#paramInformation/5",
+			"label": "Circuit 5 Schedule 2"
+		},
+		{
+			"#": "18",
+			"$import": "#paramInformation/5",
+			"label": "Circuit 5 Schedule 3"
+		},
+		{
+			"#": "19",
+			"$import": "#paramInformation/5",
+			"label": "Pool/Spa Mode Schedule 1"
+		},
+		{
+			"#": "20",
+			"$import": "#paramInformation/5",
+			"label": "Pool/Spa Mode Schedule 2"
+		},
+		{
+			"#": "21",
+			"$import": "#paramInformation/5",
+			"label": "Pool/Spa Mode Schedule 3"
+		},
+		{
+			"#": "36",
+			"$import": "#paramInformation/5",
+			"label": "Variable Speed Pump Speed 1 Schedule 1"
+		},
+		{
+			"#": "37",
+			"$import": "#paramInformation/5",
+			"label": "Variable Speed Pump Speed 1 Schedule 2"
+		},
+		{
+			"#": "38",
+			"$import": "#paramInformation/5",
+			"label": "Variable Speed Pump Speed 1 Schedule 3"
+		},
+		{
+			"#": "39",
+			"$import": "#paramInformation/5",
+			"label": "Variable Speed Pump Speed 2 Schedule 1"
+		},
+		{
+			"#": "40",
+			"$import": "#paramInformation/5",
+			"label": "Variable Speed Pump Speed 2 Schedule 2"
+		},
+		{
+			"#": "41",
+			"$import": "#paramInformation/5",
+			"label": "Variable Speed Pump Speed 2 Schedule 3"
+		},
+		{
+			"#": "42",
+			"$import": "#paramInformation/5",
+			"label": "Variable Speed Pump Speed 3 Schedule 1"
+		},
+		{
+			"#": "43",
+			"$import": "#paramInformation/5",
+			"label": "Variable Speed Pump Speed 3 Schedule 2"
+		},
+		{
+			"#": "44",
+			"$import": "#paramInformation/5",
+			"label": "Variable Speed Pump Speed 3 Schedule 3"
+		},
+		{
+			"#": "45",
+			"$import": "#paramInformation/5",
+			"label": "Variable Speed Pump Speed 4 Schedule 1"
+		},
+		{
+			"#": "46",
+			"$import": "#paramInformation/5",
+			"label": "Variable Speed Pump Speed 4 Schedule 2"
+		},
+		{
+			"#": "47",
+			"$import": "#paramInformation/5",
+			"label": "Variable Speed Pump Speed 4 Schedule 3"
 		}
 	],
 	"associations": {
@@ -71,7 +490,7 @@
 			"commandClasses": {
 				// Force use of MultiChannelCC v1.
 				"add": {
-					"0x60": {
+					"Multi Channel": {
 						"isSupported": true,
 						"version": 1
 					}
@@ -81,26 +500,26 @@
 				"remove": {
 					// BasicCC: All endpoints control the state of Switch 1 so only keep the root endpoint
 					// to reduce clutter and to handle received BASIC_SET events.
-					"0x20": {
+					"Basic": {
 						"endpoints": [1, 2, 3, 4, 5]
 					},
 					// ManufacturerSpecificCC: Endpoint 1 erroneously reports an incorrect manufacturer
 					// and product ID, unlike on the root endpoint.
-					"0x72": {
+					"Manufacturer Specific": {
 						"endpoints": [1]
 					},
 					// ClockCC: Endpoint 1 erroneously reports a time with an invalid minute field,
 					// unlike on the root endpoint.
-					"0x81": {
+					"Clock": {
 						"endpoints": [1]
 					},
 					// AssociationCC: Endpoint 1 erroneously reports that it supports 133 associated nodes
 					// but association commands don't work at all, unlike on the root endpoint.
-					"0x85": {
+					"Association": {
 						"endpoints": [1]
 					},
 					// VersionCC: Endpoint 1 reports an unknown version, unlike on the root endpoint.
-					"0x86": {
+					"Version": {
 						"endpoints": [1]
 					}
 				}

package/config/devices/0x000c/hs-fls100.json

@@ -54,7 +54,7 @@
 	"compat": {
 		"commandClasses": {
 			"remove": {
-				"0x6c": {
+				"Supervision": {
 					// The device reports that it supports Supervision, but it does not support all
 					// commands supervision-encapsulated
 					"endpoints": "*"

package/config/devices/0x000c/hs-wd100.json

@@ -47,7 +47,7 @@
 	"compat": {
 		"commandClasses": {
 			"remove": {
-				"0x6c": {
+				"Supervision": {
 					// The device does not support supervision although it is mandatory for the device type
 					"endpoints": "*"
 				}

package/config/devices/0x000c/hs-wd200.json

@@ -130,7 +130,7 @@
 	"compat": {
 		"commandClasses": {
 			"remove": {
-				"0x6c": {
+				"Supervision": {
 					// The device reports that it supports Supervision, but it does not support all
 					// commands supervision-encapsulated
 					"endpoints": "*"

package/config/devices/0x0039/39358_39465_zw4002.json

@@ -54,7 +54,7 @@
 		"treatBasicSetAsEvent": true,
 		"commandClasses": {
 			"remove": {
-				"0x6c": {
+				"Supervision": {
 					// The device does not support supervision although it is mandatory for the device type
 					"endpoints": "*"
 				}

package/config/devices/0x003b/be469zp.json

@@ -290,7 +290,7 @@
 			"remove": {
 				// https://github.com/zwave-js/node-zwave-js/issues/5260#issuecomment-1399682117
 				// The device does not accept all commands using Supervision
-				"0x6c": {
+				"Supervision": {
 					"endpoints": "*"
 				}
 			}

package/config/devices/0x0060/ac301.json

@@ -158,7 +158,7 @@
 		"commandClasses": {
 			"remove": {
 				// The device does not support Supervision correctly
-				"0x6c": {
+				"Supervision": {
 					"endpoints": "*"
 				}
 			}

package/config/devices/0x0060/hac01.json

@@ -48,7 +48,7 @@
 		// The device supports Binary Switch CC, despite the Version query telling otherwise
 		"commandClasses": {
 			"add": {
-				"0x25": {
+				"Binary Switch": {
 					"isSupported": true,
 					"version": 1
 				}

package/config/devices/0x0060/sp816.json

@@ -82,7 +82,7 @@
 		"commandClasses": {
 			"remove": {
 				// The device does not support Supervision correctly
-				"0x6c": {
+				"Supervision": {
 					"endpoints": "*"
 				}
 			}

package/config/devices/0x0063/10974_zw4002.json

@@ -17,7 +17,7 @@
 	"compat": {
 		"commandClasses": {
 			"remove": {
-				"0x6c": {
+				"Supervision": {
 					// The device does not support supervision although it is mandatory for the device type
 					"endpoints": "*"
 				}

package/config/devices/0x0063/12730_zw4002.json

@@ -43,7 +43,7 @@
 		"treatBasicSetAsEvent": true,
 		"commandClasses": {
 			"remove": {
-				"0x6c": {
+				"Supervision": {
 					// The device does not support supervision although it is mandatory for the device type
 					"endpoints": "*"
 				}

package/config/devices/0x0063/14287_zw4002.json

@@ -45,7 +45,7 @@
 		"treatBasicSetAsEvent": true,
 		"commandClasses": {
 			"remove": {
-				"0x6c": {
+				"Supervision": {
 					// The device does not support supervision although it is mandatory for the device type
 					"endpoints": "*"
 				}

package/config/devices/0x0063/14314_zw4002.json

@@ -40,7 +40,7 @@
 		"treatBasicSetAsEvent": true,
 		"commandClasses": {
 			"remove": {
-				"0x6c": {
+				"Supervision": {
 					// The device does not support supervision although it is mandatory for the device type
 					"endpoints": "*"
 				}

package/config/devices/0x0063/14318_zw4005.json

@@ -27,7 +27,7 @@
 		"commandClasses": {
 			"remove": {
 				// Removes the Z-Wave Plus CC as this device fails to send state updates. It sends NIFs, which are only refreshed for non-plus devices
-				"0x5e": {
+				"Z-Wave Plus Info": {
 					"endpoints": "*"
 				}
 			}

package/config/devices/0x0063/45743_zw4002.json

@@ -40,7 +40,7 @@
 		"treatBasicSetAsEvent": true,
 		"commandClasses": {
 			"remove": {
-				"0x6c": {
+				"Supervision": {
 					// The device does not support supervision although it is mandatory for the device type
 					"endpoints": "*"
 				}

package/config/devices/0x0063/55258_zw4002.json

@@ -40,7 +40,7 @@
 		"treatBasicSetAsEvent": true,
 		"commandClasses": {
 			"remove": {
-				"0x6c": {
+				"Supervision": {
 					// The device does not support supervision although it is mandatory for the device type
 					"endpoints": "*"
 				}