@zwave-js/config 10.0.0-beta.2 → 10.0.0-beta.4

package/config/devices/0x0262/dbzf-3410.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Press [SET] for 1 second\n2. Enter 4-8 digits Programing Code\n3. Press the buttons #90#\n4. Include successfully (beep * 1)",
-		"exclusion": "1. Press [SET] for 1 second\n2. Enter 4-8 digits Programing Code\n3. Press the buttons #90#\n4. Exclude successfully (beep * 1)",
-		"reset": "1. Remove one battery.\n2. Press and hold SET button while inserting the battery back. Hold the set button until long beep has finished.\n3. Resotring the lock to factory settings will remove its connection to your network and clear all devices from its assocation group. The reset procedure should only be used when the primary controller is missing or inoperable.\n4. Please re-enter the default Programming Code to set up the lock after restoring to factory settings",
+		"inclusion": "1. Press [SET] for 1 second\n2. Enter 4-8 digits Programming Code\n3. Press the buttons #90#\n4. Include successfully (beep * 1)",
+		"exclusion": "1. Press [SET] for 1 second\n2. Enter 4-8 digits Programming Code\n3. Press the buttons #90#\n4. Exclude successfully (beep * 1)",
+		"reset": "1. Remove one battery.\n2. Press and hold SET button while inserting the battery back. Hold the set button until long beep has finished.\n3. Resotring the lock to factory settings will remove its connection to your network and clear all devices from its association group. The reset procedure should only be used when the primary controller is missing or inoperable.\n4. Please re-enter the default Programming Code to set up the lock after restoring to factory settings",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2225/manual-G00-TPDBF19-00.pdf"
 	}
 }

package/config/devices/0x0262/gb05dbf.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Press [SET] for 1 second\n2. Enter 4-8 digits Programing Code\n3. Press the buttons #90#\n4. Include successfully (beep * 1)",
-		"exclusion": "1. Press [SET] for 1 second\n2. Enter 4-8 digits Programing Code\n3. Press the buttons #90#\n4. Exclude successfully (beep * 1)",
-		"reset": "1. Remove one battery.\n2. Press and hold SET button while inserting the battery back. Hold the set button until long beep has finished.\n3. Resotring the lock to factory settings will remove its connection to your network and clear all devices from its assocation group. The reset procedure should only be used when the primary controller is missing or inoperable.\n4. Please re-enter the default Programming Code to set up the lock after restoring to factory settings",
+		"inclusion": "1. Press [SET] for 1 second\n2. Enter 4-8 digits Programming Code\n3. Press the buttons #90#\n4. Include successfully (beep * 1)",
+		"exclusion": "1. Press [SET] for 1 second\n2. Enter 4-8 digits Programming Code\n3. Press the buttons #90#\n4. Exclude successfully (beep * 1)",
+		"reset": "1. Remove one battery.\n2. Press and hold SET button while inserting the battery back. Hold the set button until long beep has finished.\n3. Resotring the lock to factory settings will remove its connection to your network and clear all devices from its association group. The reset procedure should only be used when the primary controller is missing or inoperable.\n4. Please re-enter the default Programming Code to set up the lock after restoring to factory settings",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2682/manual-G00-TPDBF19-00.pdf"
 	}
 }

package/config/devices/0x0266/stw-gs190.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Reset SiterOne will remove all Z-Wave device and reset the controller status to factory default. \n\nIf this SiterOne is the primary controller for your network, reset controller will result in all added devices in your network being orphaned and you have to force exclude all devices and then add them again.\n\nIf this SiterOne is a secondary controller in the network, reset controller will reset this controller only , so the primary controller will no longer see the secondary controller.\n\n- Navigate to the setting Menu\n- Enter the Setting Menu, and tap the Zwave page.\n- Enter PIN code: default is 1234 \n- At the Z-Wave setting page, tap Reset Controller\n- At the Reset Controller Dialog, tap Reset \n\nWhile the controller is being reset, it will show Reseting\n\nWhen the controller is reset, it will show Successfully. Tap OK and the reset is done.",
+		"reset": "Reset SiterOne will remove all Z-Wave device and reset the controller status to factory default. \n\nIf this SiterOne is the primary controller for your network, reset controller will result in all added devices in your network being orphaned and you have to force exclude all devices and then add them again.\n\nIf this SiterOne is a secondary controller in the network, reset controller will reset this controller only , so the primary controller will no longer see the secondary controller.\n\n- Navigate to the setting Menu\n- Enter the Setting Menu, and tap the Zwave page.\n- Enter PIN code: default is 1234 \n- At the Z-Wave setting page, tap Reset Controller\n- At the Reset Controller Dialog, tap Reset \n\nWhile the controller is being reset, it will show Resetting\n\nWhen the controller is reset, it will show Successfully. Tap OK and the reset is done.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2131/STW-GS190B.pdf"
 	}
 }

package/config/devices/0x0267/10002034-13x.json

@@ -67,7 +67,7 @@
 		},
 		{
 			"#": "12",
-			"label": "Behavior of LED in Reponse",
+			"label": "Behavior of LED in Response",
 			"description": "Configuration of Main LED as identification at 20%.",
 			"valueSize": 1,
 			"defaultValue": 0,

package/config/devices/0x0267/10002081-13x.json

@@ -176,7 +176,7 @@
 	"metadata": {
 		"inclusion": "Set the Z-Wave Controller to inclusion mode.\n Press the button for between 2 and 30 seconds.",
 		"exclusion": "Set the Z-Wave Controller to exclusion mode.\n Press the button for between 2 and 30 seconds.",
-		"reset": "Long press button for more than 30 secounds in the product.\nMain LED lights up for 2.5 seconds，then turns off.",
+		"reset": "Long press button for more than 30 seconds in the product.\nMain LED lights up for 2.5 seconds，then turns off.",
 		"manual": "https://static.simonelectric.com/estaticos/extras/ficheros/contenidos/00/00/01/15/15//10002081-13x%20Tecla%20Master%20persianas%20IO_2.pdf"
 	}
 }

package/config/devices/0x0267/10002862-039.json

@@ -17,7 +17,7 @@
 	"metadata": {
 		"inclusion": "Device ADD for Inclusion\n- Click [Add] icon in Z-Wave Controller .\n- Press the Net_Button for between 2 and 30 seconds, Green LED is Blinking one time every 300 milliseconds.\n- If Inclusion Process is successful, Green led will turn off.",
 		"exclusion": "Device Remove for Exclusion\n- Click [Remove] icon in Z-Wave Controller\n- Press the Net_Button for between 2 and 30 seconds, Green LED is Blinking one time every 300 milliseconds.",
-		"reset": "-Long press Net_Button for more than 30 secounds in the product. \n- Device Reset Locally notification is Transmitted.Green led is turn on for 2.5 seconds，then turn off.\n\n. Please use this procedure only when the network primary controller is missing or otherwise inoperable.",
+		"reset": "-Long press Net_Button for more than 30 seconds in the product. \n- Device Reset Locally notification is Transmitted.Green led is turn on for 2.5 seconds，then turn off.\n\n. Please use this procedure only when the network primary controller is missing or otherwise inoperable.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3888/Simon%20smoke%20alarm%20user%20manual.pdf"
 	}
 }

package/config/devices/0x027a/zen31.json

@@ -96,7 +96,7 @@
 		{
 			"#": "65",
 			"label": "Energy Report Threshold",
-			"description": "Choose how you want your RGBW Dimmer to report energy use (kWh) to your hub. The number entered as value corresponds to decimal values in energy useage change. So if 10 is entered by default, the RGBW Dimmer will report any change in energy use over 0.1 kWh. Energy reports are sent in t least 30-second intervals.",
+			"description": "Choose how you want your RGBW Dimmer to report energy use (kWh) to your hub. The number entered as value corresponds to decimal values in energy usage change. So if 10 is entered by default, the RGBW Dimmer will report any change in energy use over 0.1 kWh. Energy reports are sent in t least 30-second intervals.",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 500,

package/config/devices/0x0299/1a92.json

@@ -67,7 +67,7 @@
 		{
 			"#": "4",
 			"label": "Button operation mode",
-			"description": "Operations mode for push buttons controlling the output. - Normal Switch: In this mode the top button will turn the output on, while the bottom button will turn the output off. - Toogle Switch: In this mode any button press will toggle the output - when on it will be turned off, when off it will be turned on.",
+			"description": "Operations mode for push buttons controlling the output. - Normal Switch: In this mode the top button will turn the output on, while the bottom button will turn the output off. - Toggle Switch: In this mode any button press will toggle the output - when on it will be turned off, when off it will be turned on.",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,

package/config/devices/0x0330/ves-zw-dim-001.json

@@ -245,7 +245,7 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Step 1. Set primary controller/gateway into inclusion mode.\nStep 2. Either power cycle the product, or triple press the action button.\n Step 3. The connected light will stay on solid for 3 seconds to indicate successfuly inclusion.",
+		"inclusion": "Step 1. Set primary controller/gateway into inclusion mode.\nStep 2. Either power cycle the product, or triple press the action button.\n Step 3. The connected light will stay on solid for 3 seconds to indicate successful inclusion.",
 		"exclusion": "Step 1. Set primary controller/gateway into exclusion mode.\nStep 2. Triple press the action button.",
 		"reset": "Press and hold the action button for over 10 seconds. The connected light will be set to 50% brightness and flash slowly.",
 		"manual": "https://cdn.shopify.com/s/files/1/0066/8149/3559/files/VES-ZW-DIM-001.pdf"

package/config/devices/0x033f/asl-03.json

@@ -24,7 +24,7 @@
 	},
 	"metadata": {
 		"inclusion": "In order to include the August Smart Lock on to a Z-Wave network the user will have to do the following:\n\n1. Open the August app\n\n2. Go to the Lock Settings screen\n\n3. Select Z-Wave Settings\n\n4. Select Add To A Z-Wave Network\n\n5. Put the controller into inclusion mode and select My Hub is in Inclusion Mode on the August app",
-		"exclusion": "In order to exclude the August Smart Lock from a Z-Wave network the user will have to do the following:\n1. Open the August app\n2. Go to the Lock Settings screen\n3. Select Z-Wave Settings\n4. Select Remove Z-Wave Device\n5. Put the controller into exclusion mode and select My Hub is in Exlusion Mode on the August app",
+		"exclusion": "In order to exclude the August Smart Lock from a Z-Wave network the user will have to do the following:\n1. Open the August app\n2. Go to the Lock Settings screen\n3. Select Z-Wave Settings\n4. Select Remove Z-Wave Device\n5. Put the controller into exclusion mode and select My Hub is in Exclusion Mode on the August app",
 		"reset": "In order to reset the August Smart Lock the user will have to do the following:\n\n1. Open the August app\n\n2. Go to the Lock Settings screen\n\n3. Select Z-Wave Settings\n\n4. Select Remove Z-Wave device\n\n5. Select My Hub Is No Longer Working\n\n6. Caution: Resetting a Z-Wave device without telling the hub can cause performance issues. Use this procedure only when the Z-Wave hub is missing or otherwise inoperable. \n\n7. Select Reset Z-Wave Device\n\n8. On the Reset Z-Wave Device? prompt select Reset",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2624/August%20Z-Wave%20Required%20Documentation.pdf",
 		"comments": {

package/config/devices/0x0346/alarm_keypad_gen1.json

@@ -134,7 +134,7 @@
 		{
 			"#": "11",
 			"label": "Ambient Light Sensor Level",
-			"description": "Light threshold where keypad will stop backlighting if higher than choosen value",
+			"description": "Light threshold where keypad will stop backlighting if higher than chosen value",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 100,

package/config/devices/0x034e/mtbas-100-wl.json

@@ -2,7 +2,7 @@
 	"manufacturer": "TEM AG",
 	"manufacturerId": "0x034e",
 	"label": "MTBAS-100-WL",
-	"description": "Radio Base Modul",
+	"description": "Radio Base Module",
 	"devices": [
 		{
 			"productType": "0x0001",

package/config/devices/0x0371/zwa008.json

@@ -118,8 +118,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Tripple clicking the tamper button includes (adds) the device",
-		"exclusion": "Tripple clicking the tamper button excludes (removes) the device",
+		"inclusion": "Triple clicking the tamper button includes (adds) the device",
+		"exclusion": "Triple clicking the tamper button excludes (removes) the device",
 		"reset": "This device also allows to be reset without any involvement of a Z-Wave controller. This procedure should only be used when the primary controller is inoperable.\nOnce Cover is removed and tamper switch is tripped, push the tamper for 5 seconds until red LED blinks. Then release tamper and push it again for 5 seconds until LED blinks",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3472/User%20manual%20-%20Aeotec%20Door%20Window%20Sensor%207%20ZWA008.pdf"
 	}

package/config/devices/0x0371/zwa009_0.0_1.255.json

@@ -67,7 +67,7 @@
 		},
 		{
 			"#": "2",
-			"label": "Humidity Change Report Threshhold",
+			"label": "Humidity Change Report Threshold",
 			"unit": "%",
 			"unsigned": true,
 			"valueSize": 1,
@@ -100,7 +100,7 @@
 		},
 		{
 			"#": "5",
-			"label": "High Temperature Basic Set Threshhold",
+			"label": "High Temperature Basic Set Threshold",
 			"unit": "0.1 °(C/F)",
 			"unsigned": true,
 			"valueSize": 2,
@@ -126,7 +126,7 @@
 		},
 		{
 			"#": "6",
-			"label": "Low Temperature Basic Set Threshhold",
+			"label": "Low Temperature Basic Set Threshold",
 			"description": "Allowable Range: 200-1000.",
 			"unit": "0.1 °(C/F)",
 			"unsigned": true,
@@ -153,7 +153,7 @@
 		},
 		{
 			"#": "7",
-			"label": "High Humidity Basic Set Threshhold",
+			"label": "High Humidity Basic Set Threshold",
 			"unit": "%",
 			"unsigned": true,
 			"valueSize": 1,
@@ -179,7 +179,7 @@
 		},
 		{
 			"#": "8",
-			"label": "Low Humidity Basic Set Threshhold",
+			"label": "Low Humidity Basic Set Threshold",
 			"unit": "%",
 			"unsigned": true,
 			"valueSize": 1,

package/config/devices/0x0371/zwa009_11.0_255.255.json

@@ -67,7 +67,7 @@
 		},
 		{
 			"#": "2",
-			"label": "Humidity Change Report Threshhold",
+			"label": "Humidity Change Report Threshold",
 			"unit": "%",
 			"unsigned": true,
 			"valueSize": 1,
@@ -100,7 +100,7 @@
 		},
 		{
 			"#": "5",
-			"label": "High Temperature Basic Set Threshhold",
+			"label": "High Temperature Basic Set Threshold",
 			"unit": "0.1 °(C/F)",
 			"unsigned": true,
 			"valueSize": 2,
@@ -126,7 +126,7 @@
 		},
 		{
 			"#": "6",
-			"label": "Low Temperature Basic Set Threshhold",
+			"label": "Low Temperature Basic Set Threshold",
 			"description": "Allowable Range: 200-1000.",
 			"unit": "0.1 °(C/F)",
 			"unsigned": true,
@@ -153,7 +153,7 @@
 		},
 		{
 			"#": "7",
-			"label": "High Humidity Basic Set Threshhold",
+			"label": "High Humidity Basic Set Threshold",
 			"unit": "%",
 			"unsigned": true,
 			"valueSize": 1,
@@ -179,7 +179,7 @@
 		},
 		{
 			"#": "8",
-			"label": "Low Humidity Basic Set Threshhold",
+			"label": "Low Humidity Basic Set Threshold",
 			"unit": "%",
 			"unsigned": true,
 			"valueSize": 1,

package/config/devices/0x0371/zwa011.json

@@ -127,8 +127,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Tripple clicking the tamper button includes (adds) the device",
-		"exclusion": "Tripple clicking the tamper button excludes (removes) the device",
+		"inclusion": "Triple clicking the tamper button includes (adds) the device",
+		"exclusion": "Triple clicking the tamper button excludes (removes) the device",
 		"reset": "This device also allows to be reset without any involvement of a Z-Wave controller. This procedure should only be used when the primary controller is inoperable.\nOnce Cover is removed and tamper switch is tripped, push the tamper for 5 seconds until red LED blinks. Then release tamper and push it again for 5 seconds until LED blinks",
 		"manual": "https://help.aeotec.com/support/solutions/articles/6000230382-door-window-sensor-7-basic-user-guide-zwa011-zwa041-"
 	}

package/config/devices/0x0371/zwa022.json

@@ -29,7 +29,7 @@
 			"maxNodes": 5
 		},
 		"4": {
-			"label": "Buttom Button set On/Off",
+			"label": "Bottom Button set On/Off",
 			"maxNodes": 5
 		},
 		"5": {
@@ -163,7 +163,7 @@
 	"metadata": {
 		"inclusion": "1. Turn your Z-Wave gateway/ controller into adding mode.\n2. Tap once the top/ bottom button, then the device will enter pairing mode",
 		"exclusion": "1. Turn your Z-Wave gateway/ controller into removing mode.\n2. Tap 6 times the top/ bottom button, then the device will enter exclusion mode",
-		"reset": "Press and hold the top/buttom button for 20s",
+		"reset": "Press and hold the top/bottom button for 20s",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4253/Aeotec%20WallMote%207%20manual.pdf"
 	}
 }

package/config/devices/0x0371/zwa037.json

@@ -29,7 +29,7 @@
 			"maxNodes": 5
 		},
 		"4": {
-			"label": "Buttom Button - Basic Set",
+			"label": "Bottom Button - Basic Set",
 			"maxNodes": 5
 		},
 		"5": {

package/config/devices/0x0371/zwa038.json

@@ -25,7 +25,7 @@
 			"maxNodes": 5
 		},
 		"3": {
-			"label": "Buttom Button - Basic Set",
+			"label": "Bottom Button - Basic Set",
 			"maxNodes": 5
 		},
 		"4": {
@@ -107,8 +107,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Turn your primary controller into inclusion mode.\n2. Press the Top/Buttom button once on product",
-		"exclusion": "1. Turn your primary controller into exclusion mode.\n2. 3*tap the Top/Buttom button on product",
+		"inclusion": "1. Turn your primary controller into inclusion mode.\n2. Press the Top/Bottom button once on product",
+		"exclusion": "1. Turn your primary controller into exclusion mode.\n2. 3*tap the Top/Bottom button on product",
 		"reset": "Press and hold the Top/ Bottom button for 20s",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4273/Aeotec%20Wall%20Switch%20manual.pdf"
 	}

package/config/devices/0x0371/zwa039.json

@@ -67,7 +67,7 @@
 		},
 		{
 			"#": "2",
-			"label": "Humidity Change Report Threshhold",
+			"label": "Humidity Change Report Threshold",
 			"unit": "%",
 			"unsigned": true,
 			"valueSize": 1,
@@ -110,7 +110,7 @@
 		},
 		{
 			"#": "5",
-			"label": "High Temperature Basic Set Threshhold",
+			"label": "High Temperature Basic Set Threshold",
 			"unit": "0.1 °(C/F)",
 			"unsigned": true,
 			"valueSize": 2,
@@ -136,7 +136,7 @@
 		},
 		{
 			"#": "6",
-			"label": "Low Temperature Basic Set Threshhold",
+			"label": "Low Temperature Basic Set Threshold",
 			"description": "Allowable Range: 200-1000.",
 			"unit": "0.1 °(C/F)",
 			"unsigned": true,
@@ -163,7 +163,7 @@
 		},
 		{
 			"#": "7",
-			"label": "High Humidity Basic Set Threshhold",
+			"label": "High Humidity Basic Set Threshold",
 			"unit": "%",
 			"unsigned": true,
 			"valueSize": 1,
@@ -199,7 +199,7 @@
 		},
 		{
 			"#": "8",
-			"label": "Low Humidity Basic Set Threshhold",
+			"label": "Low Humidity Basic Set Threshold",
 			"unit": "%",
 			"unsigned": true,
 			"valueSize": 1,

package/config/devices/0x0433/q-light_puck.json

@@ -108,7 +108,7 @@
 		{
 			"#": "8",
 			"label": "Switch type",
-			"description": "Choose between momentary, ON/OFF and roller blind switch. Available settings: 0 – momentary (Push) switch. 1 – ON/OFF switch. 2– roller blind switch-two switchs operate the device(S1 to brighter, S2 to dim",
+			"description": "Choose between momentary, ON/OFF and roller blind switch. Available settings: 0 – momentary (Push) switch. 1 – ON/OFF switch. 2– roller blind switch-two switches operate the device(S1 to brighter, S2 to dim",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"unsigned": true,
@@ -123,7 +123,7 @@
 					"value": 1
 				},
 				{
-					"label": "roller blind switch-two switchs operate the device(S1 to brighter, S2 to dim)",
+					"label": "roller blind switch-two switches operate the device(S1 to brighter, S2 to dim)",
 					"value": 2
 				}
 			]
@@ -131,7 +131,7 @@
 		{
 			"#": "9",
 			"label": "Switch functionality of S1 and S2",
-			"description": "Set the desired value from 0 to 1 to turn on/off the memory function.Setting this value to 0 turns off the dimmer's Memory fucntion.Setting this value to 1 truns on the dimmer's Memory function.",
+			"description": "Set the desired value from 0 to 1 to turn on/off the memory function. Setting this value to 0 turns off the dimmer's Memory function. Setting this value to 1 turns on the dimmer's Memory function.",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"unsigned": true,

package/config/devices/0x0438/200w dimmer.json

@@ -109,7 +109,7 @@
 					"value": 0
 				},
 				{
-					"label": "Logaritmic",
+					"label": "Logarithmic",
 					"value": 1
 				}
 			]
@@ -145,7 +145,7 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Set primary controller/gateway into inclusion mode (Please refer top your primary controllers manual on how to set your controller into inclusion). 2. Power on the in-wall dimmer. 3.Tripple Press the reset button on the dimmer, it will set the dimmer into inclusion mode. The purple indicator light will stay solid on for 10 seconds to indicate successful incusion.",
+		"inclusion": "1. Set primary controller/gateway into inclusion mode (Please refer top your primary controllers manual on how to set your controller into inclusion). 2. Power on the in-wall dimmer. 3.Triple Press the reset button on the dimmer, it will set the dimmer into inclusion mode. The purple indicator light will stay solid on for 10 seconds to indicate successful incusion.",
 		"exclusion": "1. Set the primary controller/gateway int exclusion mode (Please refer top your primary controllers manual on how to set your controller into exclusion). 2.Triple press the reset button, the dimmer will be set to exclusion mode, and wait to be excluded, then the dimmer will be excluded form the network.",
 		"reset": "Press and hold down the reset button for over 5 seconds, the dimmer will be reset to factory defaults."
 	}

package/config/devices/0x0438/dimmer-400w.json

@@ -115,7 +115,7 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Set primary controller/gateway into inclusion mode (Please refer top your primary controllers manual on how to set your controller into inclusion). 2. Power on the in-wall dimmer. 3.Tripple Press the reset button on the dimmer, it will set the dimmer into inclusion mode. The connected light will stay solid on for 3 seconds to indicate successful incusion.",
+		"inclusion": "1. Set primary controller/gateway into inclusion mode (Please refer top your primary controllers manual on how to set your controller into inclusion). 2. Power on the in-wall dimmer. 3.Triple Press the reset button on the dimmer, it will set the dimmer into inclusion mode. The connected light will stay solid on for 3 seconds to indicate successful incusion.",
 		"exclusion": "1. Set the primary controller/gateway int exclusion mode (Please refer top your primary controllers manual on how to set your controller into exclusion). 2.Triple press the reset button, the dimmer will be set to exclusion mode, and wait to be excluded, then the dimmer will be excluded form the network.",
 		"reset": "Press and hold down the reset button for over 10 seconds, the dimmer will be reset to factory defaults."
 	}

package/config/devices/0x0438/dimmer2-400w.json

@@ -170,7 +170,7 @@
 		{
 			"#": "13",
 			"label": "Over Current Protection",
-			"description": "Must be over 2.1A for 20 seconds continously",
+			"description": "Must be over 2.1A for 20 seconds continuously",
 			"valueSize": 1,
 			"defaultValue": 1,
 			"allowManualEntry": false,
@@ -292,7 +292,7 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Set primary controller/gateway into inclusion mode (Please refer top your primary controllers manual on how to set your controller into inclusion). 2. Power on the in-wall dimmer. 3.Tripple Press the reset button on the dimmer, it will set the dimmer into inclusion mode. The connected light will stay solid on for 3 seconds to indicate successful incusion.",
+		"inclusion": "1. Set primary controller/gateway into inclusion mode (Please refer top your primary controllers manual on how to set your controller into inclusion). 2. Power on the in-wall dimmer. 3.Triple Press the reset button on the dimmer, it will set the dimmer into inclusion mode. The connected light will stay solid on for 3 seconds to indicate successful incusion.",
 		"exclusion": "1. Set the primary controller/gateway int exclusion mode (Please refer top your primary controllers manual on how to set your controller into exclusion). 2.Triple press the reset button, the dimmer will be set to exclusion mode, and wait to be excluded, then the dimmer will be excluded form the network.",
 		"reset": "Press and hold down the reset button for over 10 seconds, the dimmer will be reset to factory defaults."
 	}

package/config/devices/0x0456/homee-005.json

@@ -22,7 +22,7 @@
 		}
 	},
 	"metadata": {
-		"reset": "If the Z Wave cube is reset to factory defaults, all connected Z Wave devices will be removed, and the cube gets a new Home ID. If homee is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessar y after the reset to remove and add all of the nodes in the network.\nIf this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller",
+		"reset": "If the Z Wave cube is reset to factory defaults, all connected Z Wave devices will be removed, and the cube gets a new Home ID. If homee is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to remove and add all of the nodes in the network.\nIf this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4271/homee_zwave_pdf-komprimiert.pdf"
 	}
 }

package/config/devices/0x5254/zts-110.json

@@ -45,7 +45,7 @@
 		},
 		{
 			"#": "2",
-			"label": "Differntial",
+			"label": "Differential",
 			"description": "Set Differential value from 1F/.5C to 4F/2.0C Available settings: 1 - 4",
 			"valueSize": 1,
 			"minValue": 1,

package/config/indicators.json

@@ -133,7 +133,7 @@
 		},
 		"0x05": {
 			"label": "On/Off Period: On time",
-			"description": "This property is used to set the length of the On time during an On/Off period. It allows asymetic On/Off periods. The value 0x00 MUST represent symmetric On/Off period (On time equal to Off time)"
+			"description": "This property is used to set the length of the On time during an On/Off period. It allows asymmetric On/Off periods. The value 0x00 MUST represent symmetric On/Off period (On time equal to Off time)"
 		},
 		"0x0a": {
 			"label": "Timeout: Hours",

package/config/manufacturers.json

@@ -402,7 +402,7 @@
 	"0x0198": "Venstar Inc.",
 	"0x0199": "Wireless Maingate AB",
 	"0x019a": "Sensative AB",
-	"0x019b": "ThermoFloor",
+	"0x019b": "Heatit Controls AB",
 	"0x019c": "Amdocs",
 	"0x019d": "MOBILUS MOTOR Spółka z o.o.",
 	"0x019e": "iEXERGY GmbH",

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@zwave-js/config",
-  "version": "10.0.0-beta.2",
+  "version": "10.0.0-beta.4",
   "description": "zwave-js: configuration files",
   "publishConfig": {
     "access": "public"
@@ -52,7 +52,7 @@
     "ts": "node -r esbuild-register"
   },
   "dependencies": {
-    "@zwave-js/core": "10.0.0-beta.1",
+    "@zwave-js/core": "10.0.0-beta.4",
     "@zwave-js/shared": "10.0.0-beta.1",
     "alcalzone-shared": "^4.0.1",
     "ansi-colors": "^4.1.3",
@@ -72,7 +72,7 @@
     "@types/semver": "^7.3.10",
     "@types/xml2js": "^0.4.11",
     "@types/yargs": "^17.0.10",
-    "@zwave-js/maintenance": "10.0.0-beta.1",
+    "@zwave-js/maintenance": "10.0.0-beta.4",
     "axios": "^0.27.2",
     "comment-json": "^4.2.2",
     "esbuild": "0.14.49",