@zwave-js/config 10.0.0-beta.2 → 10.0.0-beta.4

package/config/devices/0x010f/fgwceu-201.json

@@ -143,7 +143,7 @@
 		{
 			"#": "153",
 			"$import": "#paramInformation/152",
-			"label": "Second Chanel: Double Click Value"
+			"label": "Second Channel: Double Click Value"
 		}
 	]
 }

package/config/devices/0x0115/kfob.json

@@ -245,7 +245,7 @@
 		{
 			"#": "20",
 			"label": "Typical click timeout",
-			"description": "Typical time used to differenciate click, hold and double clicks in 10ms units",
+			"description": "Typical time used to differentiate click, hold and double clicks in 10ms units",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 255,

package/config/devices/0x0115/v3.json

@@ -186,7 +186,7 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Comfirm OTA",
+					"label": "Confirm OTA",
 					"value": 1
 				}
 			]

package/config/devices/0x0115/zme_ft.json

@@ -110,7 +110,7 @@
 		{
 			"#": "10",
 			"label": "Typical click timeout",
-			"description": "Typical time used to differenciate click from hold",
+			"description": "Typical time used to differentiate click from hold",
 			"unit": "in 10ms",
 			"valueSize": 1,
 			"minValue": 1,

package/config/devices/0x0116/hac01.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Chromagic Technologies Corporation",
 	"manufacturerId": "0x0116",
 	"label": "HAC01",
-	"description": "Chromagic Z-Wave Remote Botton (EU)",
+	"description": "Chromagic Z-Wave Remote Button (EU)",
 	"devices": [
 		{
 			"productType": "0x0010",

package/config/devices/0x0116/itemp.json

@@ -50,7 +50,7 @@
 		{
 			"#": "2",
 			"label": "Command sent on external dry contact",
-			"description": "Configure what te external contact sends when trigger",
+			"description": "Configure what the external contact sends when triggered",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"unsigned": true,

package/config/devices/0x0118/tz06.json

@@ -118,7 +118,7 @@
 					"value": 0
 				},
 				{
-					"label": "Switch Ingore",
+					"label": "Switch Ignore",
 					"value": 1
 				},
 				{

package/config/devices/0x0118/tz36d.json

@@ -67,7 +67,7 @@
 					"value": 0
 				},
 				{
-					"label": "Switch top and buttom button.",
+					"label": "Switch top and bottom button.",
 					"value": 1
 				}
 			]

package/config/devices/0x0118/tz65d.json

@@ -89,7 +89,7 @@
 		{
 			"#": "4",
 			"label": "Invert Switch",
-			"description": "To change the top of the switch to off and the botton to on",
+			"description": "To change the top of the switch to off and the button to on",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,

package/config/devices/0x0118/tz66d.json

@@ -91,7 +91,7 @@
 		{
 			"#": "4",
 			"label": "Invert Switch",
-			"description": "To change the top of the switch to off and the botton to on",
+			"description": "To change the top of the switch to off and the button to on",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,

package/config/devices/0x0118/tz74.json

@@ -35,7 +35,7 @@
 		{
 			"#": "2",
 			"label": "Memory Function",
-			"description": "Default with memory: the socket staus is same as before when power is on",
+			"description": "Default with memory: the socket status is same as before when power is on",
 			"valueSize": 1,
 			"defaultValue": 1,
 			"allowManualEntry": false,

package/config/devices/0x0118/tz75.json

@@ -34,7 +34,7 @@
 		},
 		{
 			"#": "3",
-			"label": "Treshold of watt for load caution",
+			"label": "Threshold of watt for load caution",
 			"unit": "W",
 			"valueSize": 2,
 			"minValue": 10,
@@ -43,7 +43,7 @@
 		},
 		{
 			"#": "4",
-			"label": "Treshold of KWH for load caution",
+			"label": "Threshold of KWH for load caution",
 			"unit": "KWH",
 			"valueSize": 2,
 			"minValue": 0,

package/config/devices/0x011b/eedomus.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "You can proceed to a Z-Wave chip factory reset in order to do a fresh installation of your network.\n\nWhen doing that the Home ID of your network will change and your devices need to be excluded (In order to be reseted) and included again.\n\nTo perform a factory reset, click on :\nConfiguration / Add or remove a device / Advanced Z-Wave functions / Reset Z-Wave controller\n\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. \nIf this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable",
+		"reset": "You can proceed to a Z-Wave chip factory reset in order to do a fresh installation of your network.\n\nWhen doing that the Home ID of your network will change and your devices need to be excluded (in order to be reset) and included again.\n\nTo perform a factory reset, click on :\nConfiguration / Add or remove a device / Advanced Z-Wave functions / Reset Z-Wave controller\n\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. \nIf this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3582/eedomus_guide_en.pdf"
 	}
 }

package/config/devices/0x0131/ne-nas-pd01z.json

@@ -17,7 +17,7 @@
 		{
 			"#": "1",
 			"label": "Sensitivity level",
-			"description": "8 = Highest sensitivity, 255 = lowest sesitivity",
+			"description": "8 = Highest sensitivity, 255 = lowest sensitivity",
 			"valueSize": 1,
 			"minValue": 8,
 			"maxValue": 255,

package/config/devices/0x013c/psp05.json

@@ -62,7 +62,7 @@
 		},
 		{
 			"#": "10",
-			"label": "Batery level reporting interval",
+			"label": "Battery level reporting interval",
 			"description": "How frequently battery status should be reported",
 			"valueSize": 1,
 			"minValue": 0,

package/config/devices/0x013c/pst02-a-br.json

@@ -250,7 +250,7 @@
 		},
 		{
 			"#": "11",
-			"label": "Auto Report Door/Windo W State",
+			"label": "Auto Report Door/Window State",
 			"description": "The default value is 12. the tick time can setting by the configuration no.20",
 			"valueSize": 1,
 			"minValue": 0,

package/config/devices/0x0149/wps104.json

@@ -85,7 +85,7 @@
 		{
 			"#": "32",
 			"label": "Next State",
-			"description": "Defines the next state if an overcurrent event occurr",
+			"description": "Defines the next state if an overcurrent event occur",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,

package/config/devices/0x014d/ibdk-01.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Please excute this reset procedure only when the primary controller is missing or inoperable.\n1. Open battery cover.\n2. Press and hold the button there\n3. LED is turned on after 5 seconds. Keep holding.\n4. LET starts blinking after 10 seconds.\n5. Release the button when the LED blinks",
+		"reset": "Please execute this reset procedure only when the primary controller is missing or inoperable.\n1. Open battery cover.\n2. Press and hold the button there\n3. LED is turned on after 5 seconds. Keep holding.\n4. LET starts blinking after 10 seconds.\n5. Release the button when the LED blinks",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3209/UVA01A_Manual_20190111.pdf"
 	}
 }

package/config/devices/0x014f/wf00z.json

@@ -17,7 +17,7 @@
 	"metadata": {
 		"inclusion": "For “Inclusion” in (adding to) a network: Put the Z-Wave™ Interface Controller into “inclusion” mode, and following its instruction to add the ZF5201 to the controller. To get in the “inclusion” mode, the distance between sensor and controller is suggested to be in one meter. Press the program switch of ZF5201 for 1 second at least. The LED on the ZF5201 should go solid, if not, please try again",
 		"exclusion": "For “Exclusion” from (removing from) a network: Put the Z-Wave™ Interface Controller into “exclusion” mode, and following its instruction to delete the ZF5201 from your controller. Press the program switch of ZF5201 for 1 second at least to be excluded",
-		"reset": "Triger the Water Sensor 10 times within 10 sec. The device will send command class of device reset to controller and back to the factory default state. Please use this procedure only in the event that the network primary controller is missing or otherwise inoperable",
+		"reset": "Trigger the Water Sensor 10 times within 10 sec. The device will send command class of device reset to controller and back to the factory default state. Please use this procedure only in the event that the network primary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1590/10008416X4%20WF00Z-1%20Instructions.pdf"
 	}
 }

package/config/devices/0x0154/123665.json

@@ -84,7 +84,7 @@
 		},
 		{
 			"#": "11",
-			"label": "Disable Switching Funktion",
+			"label": "Disable Switching Function",
 			"valueSize": 1,
 			"defaultValue": 1,
 			"allowManualEntry": false,

package/config/devices/0x0159/zmnhaa.json

@@ -60,11 +60,11 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "NO (normaly open) input type",
+					"label": "NO (normally open) input type",
 					"value": 0
 				},
 				{
-					"label": "NC (normaly close) input type",
+					"label": "NC (normally close) input type",
 					"value": 1
 				}
 			]
@@ -78,11 +78,11 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "NO (normaly open) input type",
+					"label": "NO (normally open) input type",
 					"value": 0
 				},
 				{
-					"label": "NC (normaly close) input type",
+					"label": "NC (normally close) input type",
 					"value": 1
 				}
 			]

package/config/devices/0x0159/zmnhad.json

@@ -41,11 +41,11 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "NO (normaly open) input type",
+					"label": "NO (normally open) input type",
 					"value": 0
 				},
 				{
-					"label": "NC (normaly close) input type",
+					"label": "NC (normally close) input type",
 					"value": 1
 				}
 			]
@@ -59,11 +59,11 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "NO (normaly open) input type",
+					"label": "NO (normally open) input type",
 					"value": 0
 				},
 				{
-					"label": "NC (normaly close) input type",
+					"label": "NC (normally close) input type",
 					"value": 1
 				}
 			]

package/config/devices/0x0159/zmnhkd.json

@@ -140,7 +140,7 @@
 					"value": 2000
 				},
 				{
-					"label": "Input I2 doesnt influence on the Heat/Cool process",
+					"label": "Input I2 doesn't influence on the Heat/Cool process",
 					"value": 32767
 				}
 			]

package/config/devices/0x0159/zmnhld.json

@@ -174,7 +174,7 @@
 					"value": 2000
 				},
 				{
-					"label": "Input I2 doesnt influence on the Heat/Cool process",
+					"label": "Input I2 doesn't influence on the Heat/Cool process",
 					"value": 32767
 				}
 			]

package/config/devices/0x0159/zmnhnd.json

@@ -41,11 +41,11 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "NO (normaly open) input type",
+					"label": "NO (normally open) input type",
 					"value": 0
 				},
 				{
-					"label": "NC (normaly close) input type",
+					"label": "NC (normally close) input type",
 					"value": 1
 				}
 			]

package/config/devices/0x0159/zmnhtd.json

@@ -121,7 +121,7 @@
 		},
 		{
 			"#": "42",
-			"label": "Power (W) Reporting Interal",
+			"label": "Power (W) Reporting Internal",
 			"description": "Allowable range: 60-32535",
 			"unit": "seconds",
 			"valueSize": 2,

package/config/devices/0x015b/lap255u.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Run Z-Wave Certification Application in Setting, Select \"Things\" on the left menu, select \"bridge\" on the right list, andd Select factoryReset on the right list, push Send button on the Pop up",
+		"reset": "Run Z-Wave Certification Application in Setting, Select \"Things\" on the left menu, select \"bridge\" on the right list, and Select factoryReset on the right list, push Send button on the Pop up",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1453/ZwaveCertiApp_Guide_0902_new.pdf"
 	}
 }

package/config/devices/0x015f/mh-c421.json

@@ -147,7 +147,7 @@
 					"value": 0
 				},
 				{
-					"label": "Toogle (2-state switches)",
+					"label": "Toggle (2-state switches)",
 					"value": 1
 				}
 			]

package/config/devices/0x0165/msp-3-1-x1.json

@@ -256,7 +256,7 @@
 		{
 			"#": "24",
 			"label": "Metering Heartbeat",
-			"description": "Reporting intervall for power and energy to lifeline.",
+			"description": "Reporting interval for power and energy to lifeline.",
 			"unit": "s",
 			"valueSize": 2,
 			"minValue": 0,

package/config/devices/0x016a/ft098-k55.json

@@ -241,7 +241,7 @@
 		},
 		{
 			"#": "80",
-			"label": "To Set Whcih Notification Can Be Sent to The Associated Devices (group 1) When The State of LED Bulb is Changed",
+			"label": "To Set Which Notification Can Be Sent to The Associated Devices (group 1) When The State of LED Bulb is Changed",
 			"valueSize": 1,
 			"defaultValue": 1,
 			"unsigned": true,

package/config/devices/0x0171/wbh-hg2.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "In the WeBeHome portal:\n- Open the Z-Wave module configuration page\n- Press the \"Start\" button on the section \"Reset this Home Gateway Z-Wave network to default settings\"\n\nNotice: \nIt is recommended to use Reset only when the primary controller is missing or inoperable. If this Home Gateway is the primary controller for your Z-Wave network a Reset will make all your Z-Wave accessories beeing orphan. After a Reset it is necessary to exclude (or reset) all accessories and then re-include them.\n\nIf this Home Gateway is used as a secondary controller, use this function to make it leave the Z-Wave network",
+		"reset": "In the WeBeHome portal:\n- Open the Z-Wave module configuration page\n- Press the \"Start\" button on the section \"Reset this Home Gateway Z-Wave network to default settings\"\n\nNotice: \nIt is recommended to use Reset only when the primary controller is missing or inoperable. If this Home Gateway is the primary controller for your Z-Wave network a Reset will make all your Z-Wave accessories being orphan. After a Reset it is necessary to exclude (or reset) all accessories and then re-include them.\n\nIf this Home Gateway is used as a secondary controller, use this function to make it leave the Z-Wave network",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2438/Quick%20Start%20Guide%20WeBeHome%20Home%20Gateway%20HG2Plus.pdf"
 	}
 }

package/config/devices/0x0175/mt2653.json

@@ -295,7 +295,7 @@
 					"value": 0
 				},
 				{
-					"label": "Wake up is POSSIBLE according to Intervall",
+					"label": "Wake up is POSSIBLE according to Interval",
 					"value": 1
 				}
 			]

package/config/devices/0x0179/ch-103.json

@@ -60,7 +60,7 @@
 					"value": 0
 				},
 				{
-					"label": "Motor with limit switchs",
+					"label": "Motor with limit switches",
 					"value": 1
 				},
 				{

package/config/devices/0x0179/ch-201.json

@@ -164,8 +164,8 @@
 		},
 		{
 			"#": "12",
-			"label": "Temprature threshold to send data",
-			"description": "The value that temprature should be changed to send data",
+			"label": "Temperature threshold to send data",
+			"description": "The value that temperature should be changed to send data",
 			"unit": "Δ°С",
 			"valueSize": 1,
 			"minValue": 1,
@@ -234,7 +234,7 @@
 		},
 		{
 			"#": "40",
-			"label": "Adjusment of a temperature sensor",
+			"label": "Adjustment of a temperature sensor",
 			"description": "Adjust temperature sensor if required.",
 			"valueSize": 1,
 			"defaultValue": 0,

package/config/devices/0x0185/zm-800.json

@@ -37,6 +37,6 @@
 	"metadata": {
 		"inclusion": "1. Make sure ZM-800 is in the range of the Z-Wave controller. \n2. Set the Z-Wave controller to the inclusion mode. \n3. Quickly pressing TP-Switch2 button 3 times on the ZM-800.\n4. The ZM-800 is added to the network",
 		"exclusion": "1. Make sure ZM-800 is in the range of the Z-Wave controller. \n2. Set the Z-Wave controller to the exclusion mode. \n3. Quickly pressing TP-Switch2 button 3 times on the ZM-800.\n4. The ZM-800 is deleted from the network",
-		"reset": "Note: Use the reset procedure only in the event that the network primary controller is missing or otherwise inoperable.\n1. Presse the TP-Switch2 button more than 5 seconds. \n2. Z-Wave LED is start blinking.\n3. Release the TP-Switch2 button right now.\n4. Z-Wave LED off, reset is performed"
+		"reset": "Note: Use the reset procedure only in the event that the network primary controller is missing or otherwise inoperable.\n1. Press the TP-Switch2 button more than 5 seconds. \n2. Z-Wave LED is start blinking.\n3. Release the TP-Switch2 button right now.\n4. Z-Wave LED off, reset is performed"
 	}
 }

package/config/devices/0x018f/zme_wallc-s.json

@@ -48,7 +48,7 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Seperately",
+					"label": "Separately",
 					"value": 0
 				},
 				{
@@ -71,7 +71,7 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Seperately",
+					"label": "Separately",
 					"value": 0
 				},
 				{

package/config/devices/0x019b/4512689.json

@@ -26,7 +26,7 @@
 		},
 		"2": {
 			"label": "Smoke Sensor (Basic Set)",
-			"description": "When the smoke detector is active, it will send Basic Set (0xFF) to this group. When the smoke detector is deactived, it will send Basic Set (0x00).",
+			"description": "When the smoke detector is active, it will send Basic Set (0xFF) to this group. When the smoke detector is deactivated, it will send Basic Set (0x00).",
 			"maxNodes": 5
 		}
 	},

package/config/devices/0x019b/heatit_z-trm_2_0.0_2.255.json

@@ -1,7 +1,7 @@
 {
-	"manufacturer": "ThermoFloor",
+	"manufacturer": "Heatit",
 	"manufacturerId": "0x019b",
-	"label": "Heatit Z-TRM 2",
+	"label": "Z-TRM 2",
 	"description": "Floor Thermostat",
 	"devices": [
 		{

package/config/devices/0x019b/heatit_zdim.json

@@ -1,7 +1,7 @@
 {
-	"manufacturer": "ThermoFloor",
+	"manufacturer": "Heatit",
 	"manufacturerId": "0x019b",
-	"label": "HeatIt ZDim",
+	"label": "Z-Dim",
 	"description": "Knob Smart Dimmer",
 	"devices": [
 		{

package/config/devices/0x019b/tf016_tf021.json

@@ -1,5 +1,5 @@
 {
-	"manufacturer": "ThermoFloor",
+	"manufacturer": "Heatit",
 	"manufacturerId": "0x019b",
 	"label": "TF016 / TF021",
 	"description": "ZWave Thermostat",

package/config/devices/0x019b/z-temp2.json

@@ -1,5 +1,5 @@
 {
-	"manufacturer": "ThermoFloor AS",
+	"manufacturer": "Heatit",
 	"manufacturerId": "0x019b",
 	"label": "Z-Temp2",
 	"description": "Battery operated thermostat",

package/config/devices/0x019b/z-trm2fx_3.0_255.255.json

@@ -1,5 +1,5 @@
 {
-	"manufacturer": "ThermoFloor",
+	"manufacturer": "Heatit",
 	"manufacturerId": "0x019b",
 	"label": "Z-TRM2fx",
 	"description": "Floor thermostat",

package/config/devices/0x019b/z-trm3.json

@@ -1,7 +1,7 @@
 {
-	"manufacturer": "ThermoFloor",
+	"manufacturer": "Heatit",
 	"manufacturerId": "0x019b",
-	"label": "Heatit Z-TRM3",
+	"label": "Z-TRM3",
 	"description": "Floor thermostat",
 	"devices": [
 		{

package/config/devices/0x019b/zm_single_relay_16.json

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "HeatIt",
+	"manufacturer": "Heatit",
 	"manufacturerId": "0x019b",
-	"label": "4512671",
-	"description": "Heatit ZM Single Relay 16A",
+	"label": "ZM Single Relay 16A",
+	"description": "High power relay",
 	"devices": [
 		{
 			"productType": "0x0004",

package/config/devices/0x0208/hkzw-so05.json

@@ -80,7 +80,7 @@
 		{
 			"#": "151",
 			"label": "Power Report Threshold",
-			"description": "Power threashold for when to send reports to associated devices",
+			"description": "Power threshold for when to send reports to associated devices",
 			"unit": "W",
 			"valueSize": 2,
 			"minValue": 0,

package/config/devices/0x0208/hkzw_fld01.json

@@ -164,7 +164,7 @@
 		{
 			"#": "32",
 			"label": "Level of low battery",
-			"description": "This parameter defines a battery level as the \"low bettery\"",
+			"description": "This parameter defines a battery level as the \"low battery\"",
 			"valueSize": 1,
 			"minValue": 10,
 			"maxValue": 50,

package/config/devices/0x0217/9001.json

@@ -16,7 +16,7 @@
 	},
 	"metadata": {
 		"inclusion": "To include our device into a controller.\n1.Perform 'Include' on the controller.\n2.From the lock's main menu item \"7.Zwave\", select the \"ZwaveInclusion\" by using the arrow keys to scroll to it and then pressing 'M' to select it. After a few seconds, you should see \"Success\" on the lock",
-		"exclusion": "To exclude our device from a controller .\n1.Perform 'Exclude' on the controller.\n2.From the lock's main menu item \"7.Zwave\", select the \"ZwaveExclusion\" option by using the arrow keeys to scroll to it and then pressing 'M' to sleect it. After a few seconds, you should see \"Success\" on the lock",
+		"exclusion": "To exclude our device from a controller .\n1.Perform 'Exclude' on the controller.\n2.From the lock's main menu item \"7.Zwave\", select the \"ZwaveExclusion\" option by using the arrow keeys to scroll to it and then pressing 'M' to select it. After a few seconds, you should see \"Success\" on the lock",
 		"reset": "If your controller fails or is replaced or if you need to perform a Factory reset on the device so that an inclusion may be performed again or with a new controller, Factory reset can be done on the device by selecting ‘ Hard Reset’ from the Main Menu on device’s display and pressing the 'M' button. When prompted to reset press the 'M' button on the unit and the device will display initializing. Once the reset is complete the display will return to the Main Menu. \nNote: When a Hard Reset is completed, the zwave node id is initialized to 0 and the device can't be controlled by zwave. In order to control the device again, the controller needs to include the device on zwave network",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1342/RTS%20Series%20Operational%20Manual_Updated_10222015.pdf"
 	}

package/config/devices/0x0234/lhc5020_0.0_1.255.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Logic Group",
 	"manufacturerId": "0x0234",
 	"label": "LHC5020",
-	"description": "DIN-rail module with 10 digital ouputs and 4 digital inputs",
+	"description": "DIN-rail module with 10 digital outputs and 4 digital inputs",
 	"devices": [
 		{
 			"productType": "0x0003",

package/config/devices/0x0244/homey.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "To Reset Homey to factory defaults, place Homey upside down. After a few seconds, Homey will initiate a countdown (both visually in the LED ring and verbally trough voice) of 15 seconds. After the countdown had ended, browse on a computer, laptop or tablet to setup.athom.com to initiate a new setup. PLEASE USE THE RESET PROCEDURE ONLY IF YOU EXPERIENCE SEVERE DIFFICULTIES WITH HOMEY'S OPERATING SYSTEM OR WHEN ADVISED TO DO SO BY ATHOM SUPPORT",
+		"reset": "To Reset Homey to factory defaults, place Homey upside down. After a few seconds, Homey will initiate a countdown (both visually in the LED ring and verbally through voice) of 15 seconds. After the countdown had ended, browse on a computer, laptop or tablet to setup.athom.com to initiate a new setup. PLEASE USE THE RESET PROCEDURE ONLY IF YOU EXPERIENCE SEVERE DIFFICULTIES WITH HOMEY'S OPERATING SYSTEM OR WHEN ADVISED TO DO SO BY ATHOM SUPPORT",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4208/athomhomeymanualzwave.pdf"
 	}
 }

package/config/devices/0x024a/heimdall.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Click “Reset” , show “Proccessing…” to reset the Z-Wave network.Refer user manual page 12",
+		"reset": "Click “Reset”, show “Processing…” to reset the Z-Wave network. Refer user manual page 12",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1832/UM-Heimdall-SUNITEC-en160714.pdf"
 	}
 }

package/config/devices/0x024d/dn3g6ja062.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Z-works Inc.",
 	"manufacturerId": "0x024d",
 	"label": "DN3G6JA062",
-	"description": "Lock Dectector",
+	"description": "Lock Detector",
 	"devices": [
 		{
 			"productType": "0x4761",

package/config/devices/0x024f/fms01.json

@@ -176,7 +176,7 @@
 		},
 		{
 			"#": "64",
-			"label": "Temperature Report Inteval",
+			"label": "Temperature Report Interval",
 			"description": "Report Interval in seconds",
 			"unit": "seconds",
 			"valueSize": 2,

package/config/devices/0x024f/fwc01.json

@@ -382,7 +382,7 @@
 		},
 		{
 			"#": "64",
-			"label": "Temperature Report Inteval",
+			"label": "Temperature Report Interval",
 			"unit": "seconds",
 			"valueSize": 2,
 			"minValue": 0,