@zwave-js/config 10.0.0-beta.1 → 10.0.0-beta.3

package/config/devices/0x0433/q-light_puck.json

@@ -108,7 +108,7 @@
 		{
 			"#": "8",
 			"label": "Switch type",
-			"description": "Choose between momentary, ON/OFF and roller blind switch. Available settings: 0 – momentary (Push) switch. 1 – ON/OFF switch. 2– roller blind switch-two switchs operate the device(S1 to brighter, S2 to dim",
+			"description": "Choose between momentary, ON/OFF and roller blind switch. Available settings: 0 – momentary (Push) switch. 1 – ON/OFF switch. 2– roller blind switch-two switches operate the device(S1 to brighter, S2 to dim",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"unsigned": true,
@@ -123,7 +123,7 @@
 					"value": 1
 				},
 				{
-					"label": "roller blind switch-two switchs operate the device(S1 to brighter, S2 to dim)",
+					"label": "roller blind switch-two switches operate the device(S1 to brighter, S2 to dim)",
 					"value": 2
 				}
 			]
@@ -131,7 +131,7 @@
 		{
 			"#": "9",
 			"label": "Switch functionality of S1 and S2",
-			"description": "Set the desired value from 0 to 1 to turn on/off the memory function.Setting this value to 0 turns off the dimmer's Memory fucntion.Setting this value to 1 truns on the dimmer's Memory function.",
+			"description": "Set the desired value from 0 to 1 to turn on/off the memory function. Setting this value to 0 turns off the dimmer's Memory function. Setting this value to 1 turns on the dimmer's Memory function.",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"unsigned": true,

package/config/devices/0x0438/200w dimmer.json

@@ -109,7 +109,7 @@
 					"value": 0
 				},
 				{
-					"label": "Logaritmic",
+					"label": "Logarithmic",
 					"value": 1
 				}
 			]
@@ -145,7 +145,7 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Set primary controller/gateway into inclusion mode (Please refer top your primary controllers manual on how to set your controller into inclusion). 2. Power on the in-wall dimmer. 3.Tripple Press the reset button on the dimmer, it will set the dimmer into inclusion mode. The purple indicator light will stay solid on for 10 seconds to indicate successful incusion.",
+		"inclusion": "1. Set primary controller/gateway into inclusion mode (Please refer top your primary controllers manual on how to set your controller into inclusion). 2. Power on the in-wall dimmer. 3.Triple Press the reset button on the dimmer, it will set the dimmer into inclusion mode. The purple indicator light will stay solid on for 10 seconds to indicate successful incusion.",
 		"exclusion": "1. Set the primary controller/gateway int exclusion mode (Please refer top your primary controllers manual on how to set your controller into exclusion). 2.Triple press the reset button, the dimmer will be set to exclusion mode, and wait to be excluded, then the dimmer will be excluded form the network.",
 		"reset": "Press and hold down the reset button for over 5 seconds, the dimmer will be reset to factory defaults."
 	}

package/config/devices/0x0438/dimmer-400w.json

@@ -115,7 +115,7 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Set primary controller/gateway into inclusion mode (Please refer top your primary controllers manual on how to set your controller into inclusion). 2. Power on the in-wall dimmer. 3.Tripple Press the reset button on the dimmer, it will set the dimmer into inclusion mode. The connected light will stay solid on for 3 seconds to indicate successful incusion.",
+		"inclusion": "1. Set primary controller/gateway into inclusion mode (Please refer top your primary controllers manual on how to set your controller into inclusion). 2. Power on the in-wall dimmer. 3.Triple Press the reset button on the dimmer, it will set the dimmer into inclusion mode. The connected light will stay solid on for 3 seconds to indicate successful incusion.",
 		"exclusion": "1. Set the primary controller/gateway int exclusion mode (Please refer top your primary controllers manual on how to set your controller into exclusion). 2.Triple press the reset button, the dimmer will be set to exclusion mode, and wait to be excluded, then the dimmer will be excluded form the network.",
 		"reset": "Press and hold down the reset button for over 10 seconds, the dimmer will be reset to factory defaults."
 	}

package/config/devices/0x0438/dimmer2-400w.json

@@ -170,7 +170,7 @@
 		{
 			"#": "13",
 			"label": "Over Current Protection",
-			"description": "Must be over 2.1A for 20 seconds continously",
+			"description": "Must be over 2.1A for 20 seconds continuously",
 			"valueSize": 1,
 			"defaultValue": 1,
 			"allowManualEntry": false,
@@ -292,7 +292,7 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Set primary controller/gateway into inclusion mode (Please refer top your primary controllers manual on how to set your controller into inclusion). 2. Power on the in-wall dimmer. 3.Tripple Press the reset button on the dimmer, it will set the dimmer into inclusion mode. The connected light will stay solid on for 3 seconds to indicate successful incusion.",
+		"inclusion": "1. Set primary controller/gateway into inclusion mode (Please refer top your primary controllers manual on how to set your controller into inclusion). 2. Power on the in-wall dimmer. 3.Triple Press the reset button on the dimmer, it will set the dimmer into inclusion mode. The connected light will stay solid on for 3 seconds to indicate successful incusion.",
 		"exclusion": "1. Set the primary controller/gateway int exclusion mode (Please refer top your primary controllers manual on how to set your controller into exclusion). 2.Triple press the reset button, the dimmer will be set to exclusion mode, and wait to be excluded, then the dimmer will be excluded form the network.",
 		"reset": "Press and hold down the reset button for over 10 seconds, the dimmer will be reset to factory defaults."
 	}

package/config/devices/0x0456/homee-005.json

@@ -22,7 +22,7 @@
 		}
 	},
 	"metadata": {
-		"reset": "If the Z Wave cube is reset to factory defaults, all connected Z Wave devices will be removed, and the cube gets a new Home ID. If homee is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessar y after the reset to remove and add all of the nodes in the network.\nIf this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller",
+		"reset": "If the Z Wave cube is reset to factory defaults, all connected Z Wave devices will be removed, and the cube gets a new Home ID. If homee is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to remove and add all of the nodes in the network.\nIf this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4271/homee_zwave_pdf-komprimiert.pdf"
 	}
 }

package/config/devices/0x5254/zts-110.json

@@ -45,7 +45,7 @@
 		},
 		{
 			"#": "2",
-			"label": "Differntial",
+			"label": "Differential",
 			"description": "Set Differential value from 1F/.5C to 4F/2.0C Available settings: 1 - 4",
 			"valueSize": 1,
 			"minValue": 1,

package/config/manufacturers.json

@@ -402,7 +402,7 @@
 	"0x0198": "Venstar Inc.",
 	"0x0199": "Wireless Maingate AB",
 	"0x019a": "Sensative AB",
-	"0x019b": "ThermoFloor",
+	"0x019b": "Heatit Controls AB",
 	"0x019c": "Amdocs",
 	"0x019d": "MOBILUS MOTOR Spółka z o.o.",
 	"0x019e": "iEXERGY GmbH",

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@zwave-js/config",
-  "version": "10.0.0-beta.1",
+  "version": "10.0.0-beta.3",
   "description": "zwave-js: configuration files",
   "publishConfig": {
     "access": "public"
@@ -52,7 +52,7 @@
     "ts": "node -r esbuild-register"
   },
   "dependencies": {
-    "@zwave-js/core": "10.0.0-beta.1",
+    "@zwave-js/core": "10.0.0-beta.3",
     "@zwave-js/shared": "10.0.0-beta.1",
     "alcalzone-shared": "^4.0.1",
     "ansi-colors": "^4.1.3",
@@ -72,7 +72,7 @@
     "@types/semver": "^7.3.10",
     "@types/xml2js": "^0.4.11",
     "@types/yargs": "^17.0.10",
-    "@zwave-js/maintenance": "10.0.0-beta.1",
+    "@zwave-js/maintenance": "10.0.0-beta.3",
     "axios": "^0.27.2",
     "comment-json": "^4.2.2",
     "esbuild": "0.14.49",