@zwave-js/config 10.0.0-beta.1 → 10.0.0-beta.11

package/config/devices/0x0063/58438_59346_zwa3016.json

@@ -0,0 +1,93 @@
+{
+	"manufacturer": "Enbrighten",
+	"manufacturerId": "0x0063",
+	"label": "58438 / 59346 / ZWA3016",
+	"description": "In-Wall Paddle Dimmer, QFSW, 700S",
+	"devices": [
+		{
+			"productType": "0x4944",
+			"productId": "0x3430",
+			"zwaveAllianceId": 4462
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Local Load",
+			"maxNodes": 5
+		},
+		"3": {
+			"label": "Double Tap",
+			"maxNodes": 5,
+			"isLifeline": true
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "3",
+			"$import": "~/templates/master_template.json#led_indicator_four_options"
+		},
+		{
+			"#": "4",
+			"$import": "~/templates/master_template.json#orientation"
+		},
+		{
+			"#": "5",
+			"$import": "templates/jasco_template.json#three_way_setup"
+		},
+		{
+			"#": "16",
+			"$import": "templates/jasco_template.json#switch_mode"
+		},
+		{
+			"#": "19",
+			"$import": "templates/jasco_template.json#alternate_exclusion"
+		},
+		{
+			"#": "30",
+			"$import": "templates/jasco_template.json#dim_threshold_min"
+		},
+		{
+			"#": "31",
+			"$import": "templates/jasco_template.json#dim_threshold_max"
+		},
+		{
+			"#": "32",
+			"$import": "templates/jasco_template.json#default_brightness_level"
+		},
+		{
+			"#": "34",
+			"$import": "templates/jasco_template.json#led_indicator_color"
+		},
+		{
+			"#": "35",
+			"$import": "templates/jasco_template.json#led_indicator_intensity"
+		},
+		{
+			"#": "36",
+			"$import": "templates/jasco_template.json#led_indicator_intensity",
+			"label": "Guidelight Mode Intensity"
+		},
+		{
+			"#": "84",
+			"$import": "templates/jasco_template.json#factory_default"
+		}
+	],
+	"compat": {
+		// Needed for double-tap support
+		"treatBasicSetAsEvent": true
+	},
+	"metadata": {
+		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart dimmer (rocker)",
+		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and release the top or bottom of the smart dimmer (rocker)",
+		"reset": "1. Quickly press ON (top) button three times, then immediately press the OFF (bottom) button three times. The LED will flash ON/OFF five times when completed successfully"
+	}
+}

package/config/devices/0x0063/58449_zwa1003.json

@@ -0,0 +1,17 @@
+{
+	"manufacturer": "Enbrighten",
+	"manufacturerId": "0x0063",
+	"label": "58449 / ZWA1003",
+	"description": "In-Wall Outlet, TR, 700S",
+	"devices": [
+		{
+			"productType": "0x4952",
+			"productId": "0x3339"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	}
+	// TODO: Add configuration parameters
+}

package/config/devices/0x0063/59335_59341_zwa3017.json

@@ -0,0 +1,17 @@
+{
+	"manufacturer": "Enbrighten",
+	"manufacturerId": "0x0063",
+	"label": "59335 / 59341 / ZWA3017",
+	"description": "In-Wall Toggle Dimmer, QFSW, 700S",
+	"devices": [
+		{
+			"productType": "0x4944",
+			"productId": "0x3431"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	}
+	// TODO: Add configuration parameters
+}

package/config/devices/0x0063/59337_zwa4011dv.json

@@ -0,0 +1,17 @@
+{
+	"manufacturer": "Enbrighten",
+	"manufacturerId": "0x0063",
+	"label": "59337 / ZWA4011DV",
+	"description": "In-Wall Paddle Switch, 120+277, QFSW, 700S",
+	"devices": [
+		{
+			"productType": "0x4952",
+			"productId": "0x3331"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	}
+	// TODO: Add configuration parameters
+}

package/config/devices/0x0063/59338_zwa4012dv.json

@@ -0,0 +1,17 @@
+{
+	"manufacturer": "Enbrighten",
+	"manufacturerId": "0x0063",
+	"label": "59338 / ZWA4012DV",
+	"description": "In-Wall Toggle Switch, 120+277, QFSW, 700S",
+	"devices": [
+		{
+			"productType": "0x4952",
+			"productId": "0x3332"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	}
+	// TODO: Add configuration parameters
+}

package/config/devices/0x0063/64637_zw7105.json

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "Jasco",
 	"manufacturerId": "0x0063",
-	"label": "64637/ZW7105",
-	"description": "LED Bulb",
+	"label": "64637 / ZW7105",
+	"description": "LED A19 Bulb, 500S",
 	"devices": [
 		{
 			"productType": "0x4c42",

package/config/devices/0x0063/templates/jasco_template.json

@@ -395,5 +395,77 @@
 				"value": 2
 			}
 		]
+	},
+	"three_way_setup": {
+		"label": "3-Way Setup",
+		"valueSize": 1,
+		"defaultValue": 0,
+		"unsigned": true,
+		"allowManualEntry": false,
+		"options": [
+			{
+				"label": "Add-on",
+				"value": 0
+			},
+			{
+				"label": "Standard",
+				"value": 1
+			}
+		]
+	},
+	"led_indicator_color": {
+		"label": "LED Indicator Color",
+		"valueSize": 1,
+		"defaultValue": 5,
+		"unsigned": true,
+		"allowManualEntry": false,
+		"options": [
+			{
+				"label": "Red",
+				"value": 1
+			},
+			{
+				"label": "Orange",
+				"value": 2
+			},
+			{
+				"label": "Yellow",
+				"value": 3
+			},
+			{
+				"label": "Green",
+				"value": 4
+			},
+			{
+				"label": "Blue",
+				"value": 5
+			},
+			{
+				"label": "Pink",
+				"value": 6
+			},
+			{
+				"label": "Purple",
+				"value": 7
+			},
+			{
+				"label": "White",
+				"value": 8
+			}
+		]
+	},
+	"led_indicator_intensity": {
+		"label": "LED Indicator Intensity",
+		"valueSize": 1,
+		"minValue": 0,
+		"maxValue": 7,
+		"defaultValue": 4,
+		"unsigned": true,
+		"options": [
+			{
+				"label": "Off",
+				"value": 0
+			}
+		]
 	}
 }

package/config/devices/0x0068/78008.json

@@ -87,7 +87,7 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Alwas wake up",
+					"label": "Always wake up",
 					"value": 0
 				},
 				{

package/config/devices/0x0085/arz_z-wave.json

@@ -47,7 +47,7 @@
 	],
 	"metadata": {
 		"inclusion": "Autoinclusion - This feature allow you to add hard to reach devices to Z-Wave network. 3-times ON and OFF the power roller shutter (OFF-ON-OFF-ON-OFF-ON) causes the introduction of roller shutter to Autoinclusion mode. Please note that the procedure has been started the time between on and off can not exceed 20s. Autoinclusion mode is activated for a maximum of 10 minutes. During this time, we can add an awning to any Z-Wave controller running in the Include procedure.\n\nInclude - This function allow you to add roller shutter to the network Z-Wave. Follow the procedur adding device to the network Z-Wave according to user manual supplied with the product. Then, press the programming button P on the roller shutter for 1 second",
-		"exclusion": "Exclude - This function allow you to remove roller shutter from the network Z-Wave. Follow the procedur removing device from the network Z-Wave according to user manual supplied with the product. Then, press the programming button P on the roller shutter for 1 second. Function removes information only about newtork Z-Wave",
+		"exclusion": "Exclude - This function allow you to remove roller shutter from the network Z-Wave. Follow the procedur removing device from the network Z-Wave according to user manual supplied with the product. Then, press the programming button P on the roller shutter for 1 second. Function removes information only about network Z-Wave",
 		"reset": "Device Reset Locally – This function allows you to reset the Z-Wave network without the use of Z-Wave controller. Press 5 times the programming button P fast, the roller shutter was removed from the Z-Wave network, restore the default parameters, name and locations. \nPlease use this procedure only when the network primary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2571/170307%20ARZ%20Z-WAVE%20User%20Manual.pdf"
 	}

package/config/devices/0x0086/zv9001t4-dim.json

@@ -37,7 +37,7 @@
 		},
 		{
 			"#": "4",
-			"label": "Scene Command Targer",
+			"label": "Scene Command Target",
 			"valueSize": 1,
 			"defaultValue": 1,
 			"allowManualEntry": false,
@@ -47,7 +47,7 @@
 					"value": 0
 				},
 				{
-					"label": "Assocciation Group",
+					"label": "Association Group",
 					"value": 1
 				}
 			]

package/config/devices/0x008a/alarm_sound.json

@@ -49,8 +49,8 @@
 		},
 		{
 			"#": "3",
-			"label": "Desitnation routine succes time",
-			"description": "Time it takes to send a new frame after the last frame has succesfully send",
+			"label": "Desitnation routine success time",
+			"description": "Time it takes to send a new frame after the last frame has successfully send",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 60,

package/config/devices/0x008b/zw111.json

@@ -109,7 +109,7 @@
 		},
 		{
 			"#": "81",
-			"label": "Group 3 notificaiton",
+			"label": "Group 3 notification",
 			"description": "Set notification sent to associated nodes (group 3)",
 			"valueSize": 1,
 			"defaultValue": 0,
@@ -127,7 +127,7 @@
 		},
 		{
 			"#": "82",
-			"label": "Group 4 notificaiton",
+			"label": "Group 4 notification",
 			"description": "Set notification sent to associated nodes (group 4)",
 			"valueSize": 1,
 			"defaultValue": 1,

package/config/devices/0x0099/gwpn5.json

@@ -146,5 +146,9 @@
 				}
 			]
 		}
-	]
+	],
+	"compat": {
+		// This device incorrectly uses the destination endpoint to indicate which endpoint sent the command
+		"treatDestinationEndpointAsSource": true
+	}
 }

package/config/devices/0x0109/zf5201eu-5.json

@@ -17,7 +17,7 @@
 	"metadata": {
 		"inclusion": "For “Inclusion” in (adding to) a network: Put the Z-Wave™ Interface Controller into “inclusion” mode, and following its instruction to add the ZF5201 to the controller. To get in the “inclusion” mode, the distance between sensor and controller is suggested to be in one meter. Press the program switch of ZF5201 for 1 second at least. The LED on the ZF5201 should go solid, if not, please try again",
 		"exclusion": "For “Exclusion” from (removing from) a network: Put the Z-Wave™ Interface Controller into “exclusion” mode, and following its instruction to delete the ZF5201 from your controller. Press the program switch of ZF5201 for 1 second at least to be excluded",
-		"reset": "Triger the Water Sensor 10 times within 10 sec. The device will send command class of device reset to controller and back to the factory default state. Please use this procedure only in the event that the network primary controller is missing or otherwise inoperable",
+		"reset": "Trigger the Water Sensor 10 times within 10 sec. The device will send command class of device reset to controller and back to the factory default state. Please use this procedure only in the event that the network primary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1718/ZF%205201-5_20141118.pdf"
 	}
 }

package/config/devices/0x0109/zp3111-5.json

@@ -133,7 +133,7 @@
 	"metadata": {
 		"inclusion": "To add the ZP3111 to the Z-Wave network (inclusion), place the Z-Wave primary controller into inclusion mode. Press the Program Switch of ZP3111 for sending the NIF. After sending NIF, Z-Wave will send the auto inclusion, otherwise, ZP3111 will go to sleep after 20 seconds.",
 		"exclusion": "To remove the ZP3111 from the Z-Wave network (exclusion), place the Z-Wave primary controller into “exclusion” mode, and following its instruction to delete the ZP3111 to the controller. Press the Program Switch of ZP3111 once to be excluded.",
-		"reset": "Remove cover to trigged tamper switch, LED flash once & send out Alarm Report. Press Program Switch 10 times within 10 seconds, ZP3111 will send the “Device Reset Locally Notification” command and reset to the factory default. (Remark: This is to be used only in the case of primary controller being inoperable or otherwise unavailable.)",
+		"reset": "Remove cover to trigger tamper switch, LED flash once & send out Alarm Report. Press Program Switch 10 times within 10 seconds, ZP3111 will send the “Device Reset Locally Notification” command and reset to the factory default. (Remark: This is to be used only in the case of primary controller being inoperable or otherwise unavailable.)",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2479/ZP3111-5_R2_20170316.pdf"
 	}
 }

package/config/devices/0x010b/dn3g6ja069.json

@@ -61,7 +61,7 @@
 		{
 			"#": "2",
 			"label": "Enable Switch of Alarm Notification Report",
-			"description": "Configure to send which the sensor values arbitralily. the sensor values can be selected from human detect and open/close",
+			"description": "Configure to send which the sensor values arbitrarily. the sensor values can be selected from human detect and open/close",
 			"valueSize": 1,
 			"defaultValue": 3,
 			"unsigned": true,

package/config/devices/0x010f/fgk101.json

@@ -545,7 +545,7 @@
 			"$if": "firmwareVersion >= 3.2",
 			"$import": "~/templates/master_template.json#base_enable_disable",
 			"label": "Scene: Holding",
-			"description": "Only available if Operations Mode (paramater 1) is set to external button",
+			"description": "Only available if Operations Mode (parameter 1) is set to external button",
 			"valueSize": 2
 		},
 		{
@@ -553,7 +553,7 @@
 			"$if": "firmwareVersion >= 3.2",
 			"$import": "~/templates/master_template.json#base_enable_disable",
 			"label": "Scene: Releasing",
-			"description": "Only available if Operations Mode (paramater 1) is set to external button",
+			"description": "Only available if Operations Mode (parameter 1) is set to external button",
 			"valueSize": 2
 		},
 		{
@@ -561,7 +561,7 @@
 			"$if": "firmwareVersion >= 3.2",
 			"$import": "~/templates/master_template.json#base_enable_disable",
 			"label": "Scene: Double Click",
-			"description": "Only available if Operations Mode (paramater 1) is set to external button",
+			"description": "Only available if Operations Mode (parameter 1) is set to external button",
 			"valueSize": 2
 		},
 		{
@@ -569,7 +569,7 @@
 			"$if": "firmwareVersion >= 3.2",
 			"$import": "~/templates/master_template.json#base_enable_disable",
 			"label": "Scene: Triple Click",
-			"description": "Only available if Operations Mode (paramater 1) is set to external button",
+			"description": "Only available if Operations Mode (parameter 1) is set to external button",
 			"valueSize": 2
 		},
 		{