@zwave-js/config 10.0.0-beta.1 → 10.0.0-beta.11

package/config/devices/0x0371/zwa037.json

@@ -29,7 +29,7 @@
 			"maxNodes": 5
 		},
 		"4": {
-			"label": "Buttom Button - Basic Set",
+			"label": "Bottom Button - Basic Set",
 			"maxNodes": 5
 		},
 		"5": {

package/config/devices/0x0371/zwa038.json

@@ -25,7 +25,7 @@
 			"maxNodes": 5
 		},
 		"3": {
-			"label": "Buttom Button - Basic Set",
+			"label": "Bottom Button - Basic Set",
 			"maxNodes": 5
 		},
 		"4": {
@@ -107,8 +107,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Turn your primary controller into inclusion mode.\n2. Press the Top/Buttom button once on product",
-		"exclusion": "1. Turn your primary controller into exclusion mode.\n2. 3*tap the Top/Buttom button on product",
+		"inclusion": "1. Turn your primary controller into inclusion mode.\n2. Press the Top/Bottom button once on product",
+		"exclusion": "1. Turn your primary controller into exclusion mode.\n2. 3*tap the Top/Bottom button on product",
 		"reset": "Press and hold the Top/ Bottom button for 20s",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4273/Aeotec%20Wall%20Switch%20manual.pdf"
 	}

package/config/devices/0x0371/zwa039.json

@@ -67,7 +67,7 @@
 		},
 		{
 			"#": "2",
-			"label": "Humidity Change Report Threshhold",
+			"label": "Humidity Change Report Threshold",
 			"unit": "%",
 			"unsigned": true,
 			"valueSize": 1,
@@ -110,7 +110,7 @@
 		},
 		{
 			"#": "5",
-			"label": "High Temperature Basic Set Threshhold",
+			"label": "High Temperature Basic Set Threshold",
 			"unit": "0.1 °(C/F)",
 			"unsigned": true,
 			"valueSize": 2,
@@ -136,7 +136,7 @@
 		},
 		{
 			"#": "6",
-			"label": "Low Temperature Basic Set Threshhold",
+			"label": "Low Temperature Basic Set Threshold",
 			"description": "Allowable Range: 200-1000.",
 			"unit": "0.1 °(C/F)",
 			"unsigned": true,
@@ -163,7 +163,7 @@
 		},
 		{
 			"#": "7",
-			"label": "High Humidity Basic Set Threshhold",
+			"label": "High Humidity Basic Set Threshold",
 			"unit": "%",
 			"unsigned": true,
 			"valueSize": 1,
@@ -199,7 +199,7 @@
 		},
 		{
 			"#": "8",
-			"label": "Low Humidity Basic Set Threshhold",
+			"label": "Low Humidity Basic Set Threshold",
 			"unit": "%",
 			"unsigned": true,
 			"valueSize": 1,

package/config/devices/0x041b/39446_zw3107.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Resideo",
 	"manufacturerId": "0x041b",
 	"label": "39446 / ZW3107",
-	"description": "Plug-in Dimmer (Dual Plug Simultaneous Control)",
+	"description": "Plug-in 2-Outlet Dimmer, Simultaneous, 500S",
 	"devices": [
 		{
 			"productType": "0x5044",
@@ -88,7 +88,7 @@
 			"label": "Dim Rate Timing (From Z-Wave Controller)",
 			"description": "Timing of steps",
 			"valueSize": 2,
-			"units": "10ms",
+			"unit": "10ms",
 			"minValue": 1,
 			"maxValue": 255,
 			"defaultValue": 1,
@@ -109,7 +109,7 @@
 			"label": "Dim Rate Timing (When Manually Controlled)",
 			"description": "Timing of steps",
 			"valueSize": 2,
-			"units": "10ms",
+			"unit": "10ms",
 			"minValue": 1,
 			"maxValue": 255,
 			"defaultValue": 1,
@@ -130,7 +130,7 @@
 			"label": "Dim Rate Timing (All-On/Off Command)",
 			"description": "Timing of steps",
 			"valueSize": 2,
-			"units": "10ms",
+			"unit": "10ms",
 			"minValue": 1,
 			"maxValue": 255,
 			"defaultValue": 1,

package/config/devices/0x041b/39449_zw4106.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Resideo",
 	"manufacturerId": "0x041b",
 	"label": "39449 / ZW4106",
-	"description": "Plug-in Switch (Dual Plug Simultaneous Control)",
+	"description": "Plug-in 2-Outlet Switch, Simultaneous, 500S",
 	"devices": [
 		{
 			"productType": "0x5052",

package/config/devices/0x041b/39453_zw4203.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Resideo",
 	"manufacturerId": "0x041b",
 	"label": "39453 / ZW4203",
-	"description": "Plug-in Outdoor Smart Switch",
+	"description": "Plug-in Outdoor Switch V2, 500S",
 	"devices": [
 		{
 			"productType": "0x4f50",

package/config/devices/0x041b/39455_zw4008.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Resideo",
 	"manufacturerId": "0x041b",
 	"label": "39455 / ZW4008",
-	"description": "In-Wall Smart Switch",
+	"description": "In-Wall Paddle Switch, QFSW, 500S",
 	"devices": [
 		{
 			"productType": "0x4952",

package/config/devices/0x041b/39456_zw1002.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Resideo",
 	"manufacturerId": "0x041b",
 	"label": "39456 / ZW1002",
-	"description": "In-Wall Tamper Resistant Outlet",
+	"description": "In-Wall Outlet, Tamper Resistant, 500S",
 	"devices": [
 		{
 			"productType": "0x4952",

package/config/devices/0x041b/39458_zw3010.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Resideo",
 	"manufacturerId": "0x041b",
 	"label": "39458 / ZW3010",
-	"description": "In-Wall Smart Dimmer",
+	"description": "In-Wall Paddle Dimmer, QFSW, 500S",
 	"devices": [
 		{
 			"productType": "0x4944",

package/config/devices/0x0433/q-light_puck.json

@@ -108,7 +108,7 @@
 		{
 			"#": "8",
 			"label": "Switch type",
-			"description": "Choose between momentary, ON/OFF and roller blind switch. Available settings: 0 – momentary (Push) switch. 1 – ON/OFF switch. 2– roller blind switch-two switchs operate the device(S1 to brighter, S2 to dim",
+			"description": "Choose between momentary, ON/OFF and roller blind switch. Available settings: 0 – momentary (Push) switch. 1 – ON/OFF switch. 2– roller blind switch-two switches operate the device(S1 to brighter, S2 to dim",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"unsigned": true,
@@ -123,7 +123,7 @@
 					"value": 1
 				},
 				{
-					"label": "roller blind switch-two switchs operate the device(S1 to brighter, S2 to dim)",
+					"label": "roller blind switch-two switches operate the device(S1 to brighter, S2 to dim)",
 					"value": 2
 				}
 			]
@@ -131,7 +131,7 @@
 		{
 			"#": "9",
 			"label": "Switch functionality of S1 and S2",
-			"description": "Set the desired value from 0 to 1 to turn on/off the memory function.Setting this value to 0 turns off the dimmer's Memory fucntion.Setting this value to 1 truns on the dimmer's Memory function.",
+			"description": "Set the desired value from 0 to 1 to turn on/off the memory function. Setting this value to 0 turns off the dimmer's Memory function. Setting this value to 1 turns on the dimmer's Memory function.",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"unsigned": true,

package/config/devices/0x0438/200w dimmer.json

@@ -109,7 +109,7 @@
 					"value": 0
 				},
 				{
-					"label": "Logaritmic",
+					"label": "Logarithmic",
 					"value": 1
 				}
 			]
@@ -145,7 +145,7 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Set primary controller/gateway into inclusion mode (Please refer top your primary controllers manual on how to set your controller into inclusion). 2. Power on the in-wall dimmer. 3.Tripple Press the reset button on the dimmer, it will set the dimmer into inclusion mode. The purple indicator light will stay solid on for 10 seconds to indicate successful incusion.",
+		"inclusion": "1. Set primary controller/gateway into inclusion mode (Please refer top your primary controllers manual on how to set your controller into inclusion). 2. Power on the in-wall dimmer. 3.Triple Press the reset button on the dimmer, it will set the dimmer into inclusion mode. The purple indicator light will stay solid on for 10 seconds to indicate successful incusion.",
 		"exclusion": "1. Set the primary controller/gateway int exclusion mode (Please refer top your primary controllers manual on how to set your controller into exclusion). 2.Triple press the reset button, the dimmer will be set to exclusion mode, and wait to be excluded, then the dimmer will be excluded form the network.",
 		"reset": "Press and hold down the reset button for over 5 seconds, the dimmer will be reset to factory defaults."
 	}

package/config/devices/0x0438/dimmer-400w.json

@@ -115,7 +115,7 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Set primary controller/gateway into inclusion mode (Please refer top your primary controllers manual on how to set your controller into inclusion). 2. Power on the in-wall dimmer. 3.Tripple Press the reset button on the dimmer, it will set the dimmer into inclusion mode. The connected light will stay solid on for 3 seconds to indicate successful incusion.",
+		"inclusion": "1. Set primary controller/gateway into inclusion mode (Please refer top your primary controllers manual on how to set your controller into inclusion). 2. Power on the in-wall dimmer. 3.Triple Press the reset button on the dimmer, it will set the dimmer into inclusion mode. The connected light will stay solid on for 3 seconds to indicate successful incusion.",
 		"exclusion": "1. Set the primary controller/gateway int exclusion mode (Please refer top your primary controllers manual on how to set your controller into exclusion). 2.Triple press the reset button, the dimmer will be set to exclusion mode, and wait to be excluded, then the dimmer will be excluded form the network.",
 		"reset": "Press and hold down the reset button for over 10 seconds, the dimmer will be reset to factory defaults."
 	}

package/config/devices/0x0438/dimmer2-400w.json

@@ -170,7 +170,7 @@
 		{
 			"#": "13",
 			"label": "Over Current Protection",
-			"description": "Must be over 2.1A for 20 seconds continously",
+			"description": "Must be over 2.1A for 20 seconds continuously",
 			"valueSize": 1,
 			"defaultValue": 1,
 			"allowManualEntry": false,
@@ -292,7 +292,7 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Set primary controller/gateway into inclusion mode (Please refer top your primary controllers manual on how to set your controller into inclusion). 2. Power on the in-wall dimmer. 3.Tripple Press the reset button on the dimmer, it will set the dimmer into inclusion mode. The connected light will stay solid on for 3 seconds to indicate successful incusion.",
+		"inclusion": "1. Set primary controller/gateway into inclusion mode (Please refer top your primary controllers manual on how to set your controller into inclusion). 2. Power on the in-wall dimmer. 3.Triple Press the reset button on the dimmer, it will set the dimmer into inclusion mode. The connected light will stay solid on for 3 seconds to indicate successful incusion.",
 		"exclusion": "1. Set the primary controller/gateway int exclusion mode (Please refer top your primary controllers manual on how to set your controller into exclusion). 2.Triple press the reset button, the dimmer will be set to exclusion mode, and wait to be excluded, then the dimmer will be excluded form the network.",
 		"reset": "Press and hold down the reset button for over 10 seconds, the dimmer will be reset to factory defaults."
 	}

package/config/devices/0x0456/homee-005.json

@@ -22,7 +22,7 @@
 		}
 	},
 	"metadata": {
-		"reset": "If the Z Wave cube is reset to factory defaults, all connected Z Wave devices will be removed, and the cube gets a new Home ID. If homee is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessar y after the reset to remove and add all of the nodes in the network.\nIf this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller",
+		"reset": "If the Z Wave cube is reset to factory defaults, all connected Z Wave devices will be removed, and the cube gets a new Home ID. If homee is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to remove and add all of the nodes in the network.\nIf this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4271/homee_zwave_pdf-komprimiert.pdf"
 	}
 }

package/config/devices/0x5254/zts-110.json

@@ -45,7 +45,7 @@
 		},
 		{
 			"#": "2",
-			"label": "Differntial",
+			"label": "Differential",
 			"description": "Set Differential value from 1F/.5C to 4F/2.0C Available settings: 1 - 4",
 			"valueSize": 1,
 			"minValue": 1,

package/config/devices/templates/master_template.json

@@ -155,7 +155,7 @@
 		"valueSize": 4,
 		"minValue": 1,
 		"maxValue": 65535,
-		"defaultValue": 0,
+		"defaultValue": 1,
 		"unsigned": true
 	},
 	"base_true_false": {
@@ -358,6 +358,26 @@
 			}
 		]
 	},
+	"led_indicator_three_options_inverted": {
+		"label": "LED Indicator",
+		"valueSize": 1,
+		"defaultValue": 0,
+		"allowManualEntry": false,
+		"options": [
+			{
+				"label": "On when load is on",
+				"value": 0
+			},
+			{
+				"label": "On when load is off",
+				"value": 1
+			},
+			{
+				"label": "Always off",
+				"value": 2
+			}
+		]
+	},
 	"led_indicator_four_options": {
 		"label": "LED Indicator",
 		"valueSize": 1,

package/config/indicators.json

@@ -133,7 +133,7 @@
 		},
 		"0x05": {
 			"label": "On/Off Period: On time",
-			"description": "This property is used to set the length of the On time during an On/Off period. It allows asymetic On/Off periods. The value 0x00 MUST represent symmetric On/Off period (On time equal to Off time)"
+			"description": "This property is used to set the length of the On time during an On/Off period. It allows asymmetric On/Off periods. The value 0x00 MUST represent symmetric On/Off period (On time equal to Off time)"
 		},
 		"0x0a": {
 			"label": "Timeout: Hours",

package/config/manufacturers.json

@@ -402,7 +402,7 @@
 	"0x0198": "Venstar Inc.",
 	"0x0199": "Wireless Maingate AB",
 	"0x019a": "Sensative AB",
-	"0x019b": "ThermoFloor",
+	"0x019b": "Heatit Controls AB",
 	"0x019c": "Amdocs",
 	"0x019d": "MOBILUS MOTOR Spółka z o.o.",
 	"0x019e": "iEXERGY GmbH",

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@zwave-js/config",
-  "version": "10.0.0-beta.1",
+  "version": "10.0.0-beta.11",
   "description": "zwave-js: configuration files",
   "publishConfig": {
     "access": "public"
@@ -46,14 +46,15 @@
   "scripts": {
     "prebuild": "yarn ts maintenance/prebuild.ts",
     "build": "yarn prebuild && tsc -b tsconfig.build.json",
+    "extract-api": "yarn api-extractor run",
     "clean": "tsc -b tsconfig.build.json --clean",
     "watch": "yarn run build --watch --pretty",
     "lint_config": "yarn ts maintenance/lintConfigFiles.ts",
     "ts": "node -r esbuild-register"
   },
   "dependencies": {
-    "@zwave-js/core": "10.0.0-beta.1",
-    "@zwave-js/shared": "10.0.0-beta.1",
+    "@zwave-js/core": "10.0.0-beta.10",
+    "@zwave-js/shared": "10.0.0-beta.10",
     "alcalzone-shared": "^4.0.1",
     "ansi-colors": "^4.1.3",
     "fs-extra": "^10.1.0",
@@ -63,19 +64,20 @@
     "winston": "^3.8.1"
   },
   "devDependencies": {
+    "@microsoft/api-extractor": "*",
     "@types/fs-extra": "^9.0.13",
     "@types/jest": "^27.5.2",
     "@types/js-levenshtein": "^1.1.1",
     "@types/json-logic-js": "^2.0.1",
-    "@types/node": "^14.18.22",
+    "@types/node": "^14.18.23",
     "@types/pegjs": "^0.10.3",
     "@types/semver": "^7.3.10",
     "@types/xml2js": "^0.4.11",
     "@types/yargs": "^17.0.10",
-    "@zwave-js/maintenance": "10.0.0-beta.1",
+    "@zwave-js/maintenance": "10.0.0-beta.10",
     "axios": "^0.27.2",
     "comment-json": "^4.2.2",
-    "esbuild": "0.14.49",
+    "esbuild": "0.14.51",
     "esbuild-register": "^3.3.3",
     "jest-extended": "^2.0.0",
     "js-levenshtein": "^1.1.6",

package/config/devices/0x0063/14314.json

@@ -1,56 +0,0 @@
-{
-	"manufacturer": "GE/Jasco",
-	"manufacturerId": "0x0063",
-	"label": "14314",
-	"description": "In-Wall Smart Fan Control",
-	"devices": [
-		{
-			"productType": "0x4944",
-			"productId": "0x3138",
-			"zwaveAllianceId": [1369, 1937]
-		}
-	],
-	"firmwareVersion": {
-		"min": "0.0",
-		"max": "255.255"
-	},
-	"associations": {
-		"1": {
-			"label": "Lifeline",
-			"maxNodes": 5,
-			"isLifeline": true
-		},
-		"2": {
-			"label": "Local Load",
-			"maxNodes": 5
-		},
-		"3": {
-			"label": "Double Tap",
-			"maxNodes": 5,
-			"isLifeline": true
-		}
-	},
-	"paramInformation": [
-		{
-			"#": "3",
-			"$import": "~/templates/master_template.json#led_indicator_three_options"
-		}
-	],
-	"compat": {
-		"treatBasicSetAsEvent": true,
-		"commandClasses": {
-			"remove": {
-				"0x6c": {
-					// The device does not support supervision although it is mandatory for the device type
-					"endpoints": "*"
-				}
-			}
-		}
-	},
-	"metadata": {
-		"inclusion": "Linking your device\n1. Follow the instructions for your Z-wave certified controller to include a device to\nthe Z-wave network.\n2. Once the controller is ready to include your device, press and release the top or\nbottom of the wireless smart switch(rocker) to include it in the network.\nNote: Your controller may need to be within 10 feet of the device to be included.\n3. Once your controller has confirmed that the device has been included, refresh the\nZ-wave network to optimize performance.\nPlease reference the controller’s manual for instructions",
-		"exclusion": "Note: To exclude and reset the device, follow the instructions provided by your\nZ-Wave controller",
-		"reset": "Quickly press ON (Top) button three (3) times and then immediately press the OFF (Bottom) button three (3) times. The LED will flash ON/OFF 5 times when completed successfully. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable",
-		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1937/Binder1.pdf"
-	}
-}

package/config/devices/0x0063/45607.json

@@ -1,54 +0,0 @@
-{
-	"manufacturer": "GE/Jasco",
-	"manufacturerId": "0x0063",
-	"label": "45607",
-	"description": "2-Way Dimmer Switch",
-	"devices": [
-		{
-			"productType": "0x4457",
-			"productId": "0x3033"
-		}
-	],
-	"firmwareVersion": {
-		"min": "0.0",
-		"max": "255.255"
-	},
-	"paramInformation": [
-		{
-			"#": "3",
-			"$import": "~/templates/master_template.json#led_indicator_three_options"
-		},
-		{
-			"#": "4",
-			"$import": "~/templates/master_template.json#orientation"
-		},
-		{
-			"#": "5",
-			"$import": "templates/jasco_template.json#ignore_start_level"
-		},
-		{
-			"#": "7",
-			"$import": "templates/jasco_template.json#dimmer_steps_z"
-		},
-		{
-			"#": "8",
-			"$import": "templates/jasco_template.json#dimmer_times_z"
-		},
-		{
-			"#": "9",
-			"$import": "templates/jasco_template.json#dimmer_steps"
-		},
-		{
-			"#": "10",
-			"$import": "templates/jasco_template.json#dimmer_times"
-		},
-		{
-			"#": "11",
-			"$import": "templates/jasco_template.json#dimmer_steps_a"
-		},
-		{
-			"#": "12",
-			"$import": "templates/jasco_template.json#dimmer_times_a"
-		}
-	]
-}