@zigc/lib 0.17.0-dev.76 → 0.17.0-dev.813

package/libc/include/generic-netbsd/net/dlt.h

@@ -1,4 +1,4 @@
-/*	$NetBSD: dlt.h,v 1.23 2022/05/28 21:14:57 andvar Exp $	*/
+/*	$NetBSD: dlt.h,v 1.25 2024/09/02 15:34:08 christos Exp $	*/
 
 /*-
  * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
@@ -38,6 +38,7 @@
 
 #ifndef _NET_DLT_H_
 #define _NET_DLT_H_
+
 /*
  * Link-layer header type codes.
  *
@@ -59,7 +60,12 @@
 /*
  * These are the types that are the same on all platforms, and that
  * have been defined by <net/bpf.h> for ages.
+ *
+ * DLT_LOW_MATCHING_MIN is the lowest such value; DLT_LOW_MATCHING_MAX
+ * is the highest such value.
  */
+#define DLT_LOW_MATCHING_MIN	0
+
 #define DLT_NULL	0	/* BSD loopback encapsulation */
 #define DLT_EN10MB	1	/* Ethernet (10Mb) */
 #define DLT_EN3MB	2	/* Experimental Ethernet (3Mb) */
@@ -72,6 +78,25 @@
 #define DLT_PPP		9	/* Point-to-point Protocol */
 #define DLT_FDDI	10	/* FDDI */
 
+ /*
+ * In case the code that includes this file (directly or indirectly)
+ * has also included OS files that happen to define DLT_LOW_MATCHING_MAX,
+ * with a different value (perhaps because that OS hasn't picked up
+ * the latest version of our DLT definitions), we undefine the
+ * previous value of DLT_LOW_MATCHING_MAX.
+ *
+ * (They shouldn't, because only those 10 values were assigned in
+ * the Good Old Days, before DLT_ code assignment became a bit of
+ * a free-for-all.  Perhaps 11 is DLT_ATM_RFC1483 everywhere 11
+ * is used at all, but 12 is DLT_RAW on some platforms but not
+ * OpenBSD, and the fun continues for several other values.)
+ */
+#ifdef DLT_LOW_MATCHING_MAX
+#undef DLT_LOW_MATCHING_MAX
+#endif
+
+#define DLT_LOW_MATCHING_MAX	DLT_FDDI	/* highest value in this "matching" range */
+
 /*
  * These are types that are different on some platforms, and that
  * have been defined by <net/bpf.h> for ages.  We use #ifdefs to
@@ -79,7 +104,9 @@
  * libpcap <net/bpf.h>
  *
  * XXX - DLT_ATM_RFC1483 is 13 in BSD/OS, and DLT_RAW is 14 in BSD/OS,
- * but I don't know what the right #define is for BSD/OS.
+ * but I don't know what the right #define is for BSD/OS.  The last
+ * release was in October 2003; if anybody cares about making this
+ * work on BSD/OS, give us a pull request for a change to make it work.
  */
 #define DLT_ATM_RFC1483	11	/* LLC-encapsulated ATM */
 
@@ -99,14 +126,73 @@
 #ifndef DLT_SLIP_BSDOS
 #define DLT_SLIP_BSDOS	13	/* BSD/OS Serial Line IP */
 #define DLT_PPP_BSDOS	14	/* BSD/OS Point-to-point Protocol */
-#define DLT_HIPPI	15	/* HIPPI */
-#define DLT_HDLC	16	/* HDLC framing */
 #endif
 #else
 #define DLT_SLIP_BSDOS	15	/* BSD/OS Serial Line IP */
 #define DLT_PPP_BSDOS	16	/* BSD/OS Point-to-point Protocol */
 #endif
 
+/*
+ * NetBSD uses 15 for HIPPI.
+ *
+ * From a quick look at sys/net/if_hippi.h and sys/net/if_hippisubr.c
+ * in an older version of NetBSD , the header appears to be:
+ *
+ *	a 1-byte ULP field (ULP-id)?
+ *
+ *	a 1-byte flags field;
+ *
+ *	a 2-byte "offsets" field;
+ *
+ *	a 4-byte "D2 length" field (D2_Size?);
+ *
+ *	a 4-byte "destination switch" field (or a 1-byte field
+ *	containing the Forwarding Class, Double_Wide, and Message_Type
+ *	sub fields, followed by a 3-byte Destination_Switch_Address
+ *	field?, HIPPI-LE 3.4-style?);
+ *
+ *	a 4-byte "source switch" field (or a 1-byte field containing the
+ *	Destination_Address_type and Source_Address_Type fields, followed
+ *	by a 3-byte Source_Switch_Address field, HIPPI-LE 3.4-style?);
+ *
+ *	a 2-byte reserved field;
+ *
+ *	a 6-byte destination address field;
+ *
+ *	a 2-byte "local admin" field;
+ *
+ *	a 6-byte source address field;
+ *
+ * followed by an 802.2 LLC header.
+ *
+ * This looks somewhat like something derived from the HIPPI-FP 4.4
+ * Header_Area, followed an HIPPI-FP 4.4 D1_Area containing a D1 data set
+ * with the header in HIPPI-LE 3.4 (ANSI X3.218-1993), followed by an
+ * HIPPI-FP 4.4 D2_Area (with no Offset) containing the 802.2 LLC header
+ * and payload?  Or does the "offsets" field contain the D2_Offset,
+ * with that many bytes of offset before the payload?
+ *
+ * See http://wotug.org/parallel/standards/hippi/ for an archive of
+ * HIPPI specifications.
+ *
+ * RFC 2067 imposes some additional restrictions.  It says that the
+ * Offset is always zero
+ *
+ * HIPPI is long-gone, and the source files found in an older version
+ * of NetBSD don't appear to be in the main CVS branch, so we may never
+ * see a capture with this link-layer type.
+ */
+#if defined(__NetBSD__)
+#define DLT_HIPPI	15	/* HIPPI */
+#endif
+
+/*
+ * NetBSD uses 16 for DLT_HDLC; see below.
+ * BSD/OS uses it for PPP; see above.
+ * As far as I know, no other OS uses it for anything; don't use it
+ * for anything else.
+ */
+
 /*
  * 17 was used for DLT_PFLOG in OpenBSD; it no longer is.
  *
@@ -120,9 +206,6 @@
  *
  * Don't use 17 for anything else.
  */
-#if defined(__OpenBSD__) || defined(__NetBSD__)
-#define DLT_OLD_PFLOG	17
-#endif
 
 /*
  * 18 is used for DLT_PFSYNC in OpenBSD, NetBSD, DragonFly BSD and
@@ -131,18 +214,16 @@
  * anything and doesn't appear to have ever used it for anything.)
  *
  * We define it as 18 on those platforms; it is, unfortunately, used
- * for DLT_CIP in Suse 6.3, so we don't define it as DLT_PFSYNC
- * in general.  As the packet format for it, like that for
- * DLT_PFLOG, is not only OS-dependent but OS-version-dependent,
- * we don't support printing it in tcpdump except on OSes that
- * have the relevant header files, so it's not that useful on
- * other platforms.
+ * for DLT_CIP in SUSE 6.3, so we don't define it as 18 on all
+ * platforms. We define it as 121 on FreeBSD and as the same
+ * value that we assigned to LINKTYPE_PFSYNC on all remaining
+ * platforms.
  */
 #if defined(__OpenBSD__) || defined(__NetBSD__) || defined(__DragonFly__) || defined(__APPLE__)
 #define DLT_PFSYNC	18
 #endif
 
-#define DLT_ATM_CLIP	19	/* Linux Classical-IP over ATM */
+#define DLT_ATM_CLIP	19	/* Linux Classical IP over ATM */
 
 /*
  * Apparently Redback uses this for its SmartEdge 400/800.  I hope
@@ -181,10 +262,10 @@
  * and the LINKTYPE_ value that appears in capture files, are the
  * same.
  *
- * DLT_MATCHING_MIN is the lowest such value; DLT_MATCHING_MAX is
+ * DLT_HIGH_MATCHING_MIN is the lowest such value; DLT_HIGH_MATCHING_MAX is
  * the highest such value.
  */
-#define DLT_MATCHING_MIN	104
+#define DLT_HIGH_MATCHING_MIN	104
 
 /*
  * This value was defined by libpcap 0.5; platforms that have defined
@@ -225,7 +306,8 @@
  * that the AF_ type in the link-layer header is in network byte order.
  *
  * DLT_LOOP is 12 in OpenBSD, but that's DLT_RAW in other OSes, so
- * we don't use 12 for it in OSes other than OpenBSD.
+ * we don't use 12 for it in OSes other than OpenBSD; instead, we
+ * use the same value as LINKTYPE_LOOP.
  */
 #ifdef __OpenBSD__
 #define DLT_LOOP	12
@@ -236,7 +318,7 @@
 /*
  * Encapsulated packets for IPsec; DLT_ENC is 13 in OpenBSD, but that's
  * DLT_SLIP_BSDOS in NetBSD, so we don't use 13 for it in OSes other
- * than OpenBSD.
+ * than OpenBSD; instead, we use the same value as LINKTYPE_ENC.
  */
 #ifdef __OpenBSD__
 #define DLT_ENC		13
@@ -245,12 +327,22 @@
 #endif
 
 /*
- * Values between 110 and 112 are reserved for use in capture file headers
+ * Values 110 and 111 are reserved for use in capture file headers
  * as link-layer types corresponding to DLT_ types that might differ
  * between platforms; don't use those values for new DLT_ types
  * other than the corresponding DLT_ types.
  */
 
+/*
+ * NetBSD uses 16 for (Cisco) "HDLC framing".  For other platforms,
+ * we define it to have the same value as LINKTYPE_NETBSD_HDLC.
+ */
+#if defined(__NetBSD__)
+#define DLT_HDLC	16	/* Cisco HDLC */
+#else
+#define DLT_HDLC	112
+#endif
+
 /*
  * Linux cooked sockets.
  */
@@ -471,7 +563,7 @@
 #define DLT_DOCSIS		143
 
 /*
- * Linux-IrDA packets. Protocol defined at http://www.irda.org.
+ * Linux-IrDA packets. Protocol defined at https://www.irda.org.
  * Those packets include IrLAP headers and above (IrLMP...), but
  * don't include Phy framing (SOF/EOF/CRC & byte stuffing), because Phy
  * framing can be handled by the hardware and depend on the bitrate.
@@ -479,7 +571,7 @@
  * interface (irdaX), but not on a raw serial port.
  * Note the capture is done in "Linux-cooked" mode, so each packet include
  * a fake packet header (struct sll_header). This is because IrDA packet
- * decoding is dependant on the direction of the packet (incoming or
+ * decoding is dependent on the direction of the packet (incoming or
  * outgoing).
  * When/if other platform implement IrDA capture, we may revisit the
  * issue and define a real DLT_IRDA...
@@ -613,7 +705,7 @@
 /*
  * Link types requested by Gregor Maier <gregor@endace.com> of Endace
  * Measurement Systems.  They add an ERF header (see
- * http://www.endace.com/support/EndaceRecordFormat.pdf) in front of
+ * https://www.endace.com/support/EndaceRecordFormat.pdf) in front of
  * the link-layer header.
  */
 #define DLT_ERF_ETH		175	/* Ethernet */
@@ -657,7 +749,7 @@
  * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
  * Every frame contains a 32bit A429 label.
  * More documentation on Arinc 429 can be found at
- * http://www.condoreng.com/support/downloads/tutorials/ARINCTutorial.pdf
+ * https://web.archive.org/web/20040616233302/https://www.condoreng.com/support/downloads/tutorials/ARINCTutorial.pdf
  */
 #define DLT_A429                184
 
@@ -756,7 +848,7 @@
 
 /*
  * Various link-layer types, with a pseudo-header, for SITA
- * (http://www.sita.aero/); requested by Fulko Hew (fulko.hew@gmail.com).
+ * (https://www.sita.aero/); requested by Fulko Hew (fulko.hew@gmail.com).
  */
 #define DLT_SITA		196
 
@@ -823,8 +915,11 @@
  * PPP, with a one-byte direction pseudo-header prepended - zero means
  * "received by this host", non-zero (any non-zero value) means "sent by
  * this host" - as per Will Barker <w.barker@zen.co.uk>.
+ *
+ * Don't confuse this with DLT_PPP_WITH_DIRECTION, which is an old
+ * name for what is now called DLT_PPP_PPPD.
  */
-#define DLT_PPP_WITH_DIR	204	/* Don't confuse with DLT_PPP_WITH_DIRECTION */
+#define DLT_PPP_WITH_DIR	204
 
 /*
  * Cisco HDLC, with a one-byte direction pseudo-header prepended - zero
@@ -868,7 +963,7 @@
 
 /*
  * Media Oriented Systems Transport (MOST) bus for multimedia
- * transport - http://www.mostcooperation.com/ - as requested
+ * transport - https://www.mostcooperation.com/ - as requested
  * by Hannes Kaelber <hannes.kaelber@x2e.de>.
  */
 #define DLT_MOST		211
@@ -950,9 +1045,9 @@
 #define DLT_AOS                 222
 
 /*
- * Wireless HART (Highway Addressable Remote Transducer)
+ * WirelessHART (Highway Addressable Remote Transducer)
  * From the HART Communication Foundation
- * IES/PAS 62591
+ * IEC/PAS 62591
  *
  * Requested by Sam Roberts <vieuxtech@gmail.com>.
  */
@@ -1054,16 +1149,16 @@
 /*
  * Raw D-Bus:
  *
- *	http://www.freedesktop.org/wiki/Software/dbus
+ *	https://www.freedesktop.org/wiki/Software/dbus
  *
  * messages:
  *
- *	http://dbus.freedesktop.org/doc/dbus-specification.html#message-protocol-messages
+ *	https://dbus.freedesktop.org/doc/dbus-specification.html#message-protocol-messages
  *
  * starting with the endianness flag, followed by the message type, etc.,
  * but without the authentication handshake before the message sequence:
  *
- *	http://dbus.freedesktop.org/doc/dbus-specification.html#auth-protocol
+ *	https://dbus.freedesktop.org/doc/dbus-specification.html#auth-protocol
  *
  * Requested by Martin Vidner <martin@vidner.net>.
  */
@@ -1081,7 +1176,7 @@
  * DVB-CI (DVB Common Interface for communication between a PC Card
  * module and a DVB receiver).  See
  *
- *	http://www.kaiser.cx/pcap-dvbci.html
+ *	https://www.kaiser.cx/pcap-dvbci.html
  *
  * for the specification.
  *
@@ -1217,15 +1312,17 @@
 #define DLT_BLUETOOTH_LE_LL	251
 
 /*
- * DLT type for upper-protocol layer PDU saves from wireshark.
+ * DLT type for upper-protocol layer PDU saves from Wireshark.
+ *
+ * the actual contents are determined by two TAGs, one or more of
+ * which is stored with each packet:
  *
- * the actual contents are determined by two TAGs stored with each
- * packet:
- *   EXP_PDU_TAG_LINKTYPE          the link type (LINKTYPE_ value) of the
- *				   original packet.
+ *   EXP_PDU_TAG_DISSECTOR_NAME      the name of the Wireshark dissector
+ *				     that can make sense of the data stored.
  *
- *   EXP_PDU_TAG_PROTO_NAME        the name of the wireshark dissector
- * 				   that can make sense of the data stored.
+ *   EXP_PDU_TAG_HEUR_DISSECTOR_NAME the name of the Wireshark heuristic
+ *				     dissector that can make sense of the
+ *				     data stored.
  */
 #define DLT_WIRESHARK_UPPER_PDU	252
 
@@ -1370,9 +1467,9 @@
 
 /*
  * per: Stefanha at gmail.com for
- *   http://lists.sandelman.ca/pipermail/tcpdump-workers/2017-May/000772.html
+ *   https://lists.sandelman.ca/pipermail/tcpdump-workers/2017-May/000772.html
  * and: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/uapi/linux/vsockmon.h
- * for: http://qemu-project.org/Features/VirtioVsock
+ * for: https://qemu-project.org/Features/VirtioVsock
  */
 #define DLT_VSOCK               271
 
@@ -1384,7 +1481,7 @@
 /*
  * Excentis DOCSIS 3.1 RF sniffer (XRA-31)
  *   per: bruno.verstuyft at excentis.com
- *        http://www.xra31.com/xra-header
+ *        https://www.xra31.com/xra-header
  */
 #define DLT_DOCSIS31_XRA31	273
 
@@ -1406,17 +1503,94 @@
  */
 #define DLT_LINUX_SLL2	276
 
+/*
+ * Sercos Monitor, per Manuel Jacob <manuel.jacob at steinbeis-stg.de>
+ */
+#define DLT_SERCOS_MONITOR 277
+
+/*
+ * OpenVizsla http://openvizsla.org is open source USB analyzer hardware.
+ * It consists of FPGA with attached USB phy and FTDI chip for streaming
+ * the data to the host PC.
+ *
+ * Current OpenVizsla data encapsulation format is described here:
+ * https://github.com/matwey/libopenvizsla/wiki/OpenVizsla-protocol-description
+ *
+ */
+#define DLT_OPENVIZSLA	        278
+
+/*
+ * The Elektrobit High Speed Capture and Replay (EBHSCR) protocol is produced
+ * by a PCIe Card for interfacing high speed automotive interfaces.
+ *
+ * The specification for this frame format can be found at:
+ *   https://www.elektrobit.com/ebhscr
+ *
+ * for Guenter.Ebermann at elektrobit.com
+ *
+ */
+#define DLT_EBHSCR	        279
+
+/*
+ * The https://fd.io vpp graph dispatch tracer produces pcap trace files
+ * in the format documented here:
+ * https://fdio-vpp.readthedocs.io/en/latest/gettingstarted/developers/vnet.html#graph-dispatcher-pcap-tracing
+ */
+#define DLT_VPP_DISPATCH	280
+
+/*
+ * Broadcom Ethernet switches (ROBO switch) 4 bytes proprietary tagging format.
+ */
+#define DLT_DSA_TAG_BRCM	281
+#define DLT_DSA_TAG_BRCM_PREPEND	282
+
+/*
+ * IEEE 802.15.4 with pseudo-header and optional meta-data TLVs, PHY payload
+ * exactly as it appears in the spec (no padding, no nothing), and FCS if
+ * specified by FCS Type TLV;  requested by James Ko <jck@exegin.com>.
+ * Specification at https://github.com/jkcko/ieee802.15.4-tap
+ */
+#define DLT_IEEE802_15_4_TAP    283
+
+/*
+ * Marvell (Ethertype) Distributed Switch Architecture proprietary tagging format.
+ */
+#define DLT_DSA_TAG_DSA		284
+#define DLT_DSA_TAG_EDSA	285
+
+/*
+ * Payload of lawful intercept packets using the ELEE protocol;
+ * https://socket.hr/draft-dfranusic-opsawg-elee-00.xml
+ * https://xml2rfc.tools.ietf.org/cgi-bin/xml2rfc.cgi?url=https://socket.hr/draft-dfranusic-opsawg-elee-00.xml&modeAsFormat=html/ascii
+ */
+#define DLT_ELEE		286
+
+/*
+ * Serial frames transmitted between a host and a Z-Wave chip.
+ */
+#define DLT_Z_WAVE_SERIAL	287
+
+/*
+ * USB 2.0, 1.1, and 1.0 packets as transmitted over the cable.
+ */
+#define DLT_USB_2_0		288
+
+/*
+ * ATSC Link-Layer Protocol (A/330) packets.
+ */
+#define DLT_ATSC_ALP		289
+
 /*
  * In case the code that includes this file (directly or indirectly)
- * has also included OS files that happen to define DLT_MATCHING_MAX,
+ * has also included OS files that happen to define DLT_HIGH_MATCHING_MAX,
  * with a different value (perhaps because that OS hasn't picked up
  * the latest version of our DLT definitions), we undefine the
- * previous value of DLT_MATCHING_MAX.
+ * previous value of DLT_HIGH_MATCHING_MAX.
  */
-#ifdef DLT_MATCHING_MAX
-#undef DLT_MATCHING_MAX
+#ifdef DLT_HIGH_MATCHING_MAX
+#undef DLT_HIGH_MATCHING_MAX
 #endif
-#define DLT_MATCHING_MAX	276	/* highest value in the "matching" range */
+#define DLT_HIGH_MATCHING_MAX	289	/* highest value in the "matching" range */
 
 /*
  * DLT and savefile link type values are split into a class and
@@ -1437,4 +1611,4 @@
 #define	DLT_NETBSD_RAWAF_AF(x)	((x) & 0x0000ffff)
 #define	DLT_IS_NETBSD_RAWAF(x)	(DLT_CLASS(x) == DLT_CLASS_NETBSD_RAWAF)
 
-#endif /* !_NET_DLT_H_ */
+#endif /* _NET_DLT_H_ */

package/libc/include/generic-netbsd/net/if.h

@@ -1,4 +1,4 @@
-/*	$NetBSD: if.h,v 1.304 2022/11/25 08:39:32 knakahara Exp $	*/
+/*	$NetBSD: if.h,v 1.308.2.1 2026/05/07 18:17:32 martin Exp $	*/
 
 /*-
  * Copyright (c) 1999, 2000, 2001 The NetBSD Foundation, Inc.
@@ -420,7 +420,12 @@ typedef struct ifnet {
 			*if_percpuq;	/* :: we should remove it in the future */
 	struct work	if_link_work;	/* q: linkage on link state work queue */
 	uint16_t	if_link_queue;	/* q: masked link state change queue */
-					/* q: is link state work scheduled? */
+#define	LINK_QUEUE_LOCKED	(1 << 0)
+#define	LINK_QUEUE_SCHEDULED	(1 << 1)
+#define	LINK_QUEUE_DOWN		(1 << 2)
+#define	LINK_QUEUE_UNKNOWN	(1 << 3)
+#define	LINK_QUEUE_UP		(1 << 4)
+					/* if_link_scheduled is unused */
 	bool		if_link_scheduled;
 	struct pslist_entry
 			if_pslist_entry;/* i: */
@@ -451,7 +456,7 @@ typedef struct ifnet {
 /*			0x0020		   was IFF_NOTRAILERS */
 #else
 /*
- * sys/compat/svr4 is remvoed on 19 Dec 2018.
+ * sys/compat/svr4 is removed on 19 Dec 2018.
  * And then, IFF_NOTRAILERS itself is removed by if.h:r1.268 on 5 Feb 2019.
  */
 #define	IFF_UNNUMBERED	0x0020		/* explicit unnumbered */
@@ -459,7 +464,15 @@ typedef struct ifnet {
 #define	IFF_RUNNING	0x0040		/* resources allocated */
 #define	IFF_NOARP	0x0080		/* no address resolution protocol */
 #define	IFF_PROMISC	0x0100		/* receive all packets */
-#define	IFF_ALLMULTI	0x0200		/* receive all multicast packets */
+#define	IFF_ALLMULTI	0x0200		/* OBSOLETE -- DO NOT USE */
+/*
+ * IFF_ALLMULTI obsoleted on 2019-05-15 -- existing non-MP-safe drivers
+ * can use it for themselves under IFNET_LOCK, but they should be
+ * converted to use ETHER_F_ALLMULTI under ETHER_LOCK instead.  For
+ * compatibility with existing drivers, if_ethersubr and if_arcsubr
+ * will set IFF_ALLMULTI according to other flags, but you should not
+ * rely on this.
+ */
 #define	IFF_OACTIVE	0x0400		/* transmission in progress */
 #define	IFF_SIMPLEX	0x0800		/* can't hear own transmissions */
 #define	IFF_LINK0	0x1000		/* per link layer defined bit */
@@ -1216,7 +1229,6 @@ void	ifafree(struct ifaddr *);
 
 struct	ifaddr *ifa_ifwithaddr(const struct sockaddr *);
 struct	ifaddr *ifa_ifwithaddr_psref(const struct sockaddr *, struct psref *);
-struct	ifaddr *ifa_ifwithaf(int);
 struct	ifaddr *ifa_ifwithdstaddr(const struct sockaddr *);
 struct	ifaddr *ifa_ifwithdstaddr_psref(const struct sockaddr *,
 	    struct psref *);
@@ -1230,6 +1242,9 @@ struct	ifaddr *ifaof_ifpforaddr_psref(const struct sockaddr *, struct ifnet *,
 void	link_rtrequest(int, struct rtentry *, const struct rt_addrinfo *);
 void	p2p_rtrequest(int, struct rtentry *, const struct rt_addrinfo *);
 
+struct ifaddr *if_first_addr(const struct ifnet *ifp, const int af);
+struct ifaddr *if_first_addr_psref(const struct ifnet *ifp, const int af, struct psref *psref);
+
 void	if_clone_attach(struct if_clone *);
 void	if_clone_detach(struct if_clone *);
 

package/libc/include/generic-netbsd/net/if_bridgevar.h

@@ -1,4 +1,4 @@
-/*	$NetBSD: if_bridgevar.h,v 1.37.4.1 2024/09/05 09:27:12 martin Exp $	*/
+/*	$NetBSD: if_bridgevar.h,v 1.40 2025/04/22 05:47:51 ozaki-r Exp $	*/
 
 /*
  * Copyright 2001 Wasabi Systems, Inc.
@@ -332,6 +332,7 @@ struct bridge_softc {
 	uint32_t		sc_filter_flags; /* ipf and flags */
 	int			sc_csum_flags_tx;
 	int			sc_capenable;
+	bool			sc_stopping;
 };
 
 extern const uint8_t bstp_etheraddr[];
@@ -353,8 +354,6 @@ void	bridge_calc_csum_flags(struct bridge_softc *);
 #define BRIDGE_UNLOCK(_sc)	mutex_exit(BRIDGE_LOCK_OBJ(_sc))
 #define BRIDGE_LOCKED(_sc)	mutex_owned(BRIDGE_LOCK_OBJ(_sc))
 
-#define BRIDGE_PSZ_RENTER(__s)	do { __s = pserialize_read_enter(); } while (0)
-#define BRIDGE_PSZ_REXIT(__s)	do { pserialize_read_exit(__s); } while (0)
 #define BRIDGE_PSZ_PERFORM(_sc)	pserialize_perform((_sc)->sc_iflist_psref.bip_psz)
 
 #define BRIDGE_IFLIST_READER_FOREACH(_bif, _sc) \

package/libc/include/generic-netbsd/net/if_ether.h

@@ -1,4 +1,4 @@
-/*	$NetBSD: if_ether.h,v 1.89 2022/06/20 08:14:48 yamaguchi Exp $	*/
+/*	$NetBSD: if_ether.h,v 1.91 2024/02/05 21:46:06 andvar Exp $	*/
 
 /*
  * Copyright (c) 1982, 1986, 1993
@@ -110,7 +110,7 @@ struct ether_header {
 	 (((etype) == ETHERTYPE_PPPOE) ? ETHER_PPPOE_ENCAP_LEN : 0))
 
 /*
- * Ethernet CRC32 polynomials (big- and little-endian verions).
+ * Ethernet CRC32 polynomials (big- and little-endian versions).
  */
 #define	ETHER_CRC_POLY_LE	0xedb88320
 #define	ETHER_CRC_POLY_BE	0x04c11db6
@@ -255,7 +255,8 @@ void	ether_set_vlan_cb(struct ethercom *, ether_vlancb_t);
 int	ether_ioctl(struct ifnet *, u_long, void *);
 int	ether_addmulti(const struct sockaddr *, struct ethercom *);
 int	ether_delmulti(const struct sockaddr *, struct ethercom *);
-int	ether_multiaddr(const struct sockaddr *, uint8_t[], uint8_t[]);
+int	ether_multiaddr(const struct sockaddr *, uint8_t[ETHER_ADDR_LEN],
+			uint8_t[ETHER_ADDR_LEN]);
 void    ether_input(struct ifnet *, struct mbuf *);
 
 /*

package/libc/include/generic-netbsd/net/if_lagg.h

@@ -1,4 +1,4 @@
-/*	$NetBSD: if_lagg.h,v 1.3 2021/11/08 06:29:16 yamaguchi Exp $	*/
+/*	$NetBSD: if_lagg.h,v 1.4 2024/04/04 07:55:32 yamaguchi Exp $	*/
 
 /*
  * Copyright (c) 2005, 2006 Reyk Floeter <reyk@openbsd.org>
@@ -184,7 +184,7 @@ struct lagg_req {
 	lagg_proto		 lrq_proto;
 	size_t			 lrq_nports;
 	struct laggreqproto	 lrq_reqproto;
-	struct laggreqport	 lrq_reqports[1];
+	struct laggreqport	 lrq_reqports[];
 };
 
 #define	SIOCGLAGG		SIOCGIFGENERIC

package/libc/include/generic-netbsd/net/if_media.h

@@ -1,4 +1,4 @@
-/*	$NetBSD: if_media.h,v 1.71 2020/03/15 23:04:51 thorpej Exp $	*/
+/*	$NetBSD: if_media.h,v 1.72 2024/04/18 10:32:03 andvar Exp $	*/
 
 /*-
  * Copyright (c) 1998, 2000, 2001, 2020 The NetBSD Foundation, Inc.
@@ -981,7 +981,7 @@ void	ifmedia_init(struct ifmedia *, int, ifm_change_cb_t, ifm_stat_cb_t);
 void	ifmedia_init_with_lock(struct ifmedia *, int, ifm_change_cb_t,
 	    ifm_stat_cb_t, kmutex_t *);
 
-/* Release resourecs associated with an ifmedia. */
+/* Release resources associated with an ifmedia. */
 void	ifmedia_fini(struct ifmedia *);
 
 

package/libc/include/generic-netbsd/net/if_ppp.h

@@ -1,4 +1,4 @@
-/*	$NetBSD: if_ppp.h,v 1.27 2015/09/06 06:01:01 dholland Exp $	*/
+/*	$NetBSD: if_ppp.h,v 1.28 2025/01/08 18:05:39 christos Exp $	*/
 /*	Id: if_ppp.h,v 1.16 1997/04/30 05:46:04 paulus Exp 	*/
 
 /*
@@ -139,7 +139,6 @@ struct ppp_rawin {
 #define PPPIOCGNPMODE	_IOWR('t', 76, struct npioctl) /* get NP mode */
 #define PPPIOCSNPMODE	_IOW('t', 75, struct npioctl)  /* set NP mode */
 #define PPPIOCGIDLE	_IOR('t', 74, struct ppp_idle) /* get idle time */
-#ifdef PPP_FILTER
 /*
  * XXX These are deprecated; they can no longer be used, because they
  * XXX don't play well with multiple encaps.  The defs are here so that
@@ -156,7 +155,6 @@ struct ppp_rawin {
 #define	PPPIOCSOPASS	_IOW('t', 68, struct bpf_program) /* set out pass flt */
 #define	PPPIOCSIACTIVE	_IOW('t', 67, struct bpf_program) /* set in act flt */
 #define	PPPIOCSOACTIVE	_IOW('t', 66, struct bpf_program) /* set out act flt */
-#endif /* PPP_FILTER */
 
 /* PPPIOC[GS]MTU are alternatives to SIOC[GS]IFMTU, used under Ultrix */
 #define PPPIOCGMTU	_IOR('t', 73, int)	/* get interface MTU */