@zigc/lib 0.17.0-dev.607 → 0.17.0-dev.633

package/libc/include/generic-netbsd/dev/ic/summitreg.h

@@ -0,0 +1,214 @@
+/*	$NetBSD: summitreg.h,v 1.16 2025/01/29 15:35:22 macallan Exp $	*/
+
+/*
+ * Copyright (c) 2024 Michael Lorenz
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR OR HIS RELATIVES BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF MIND, USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* HP Visualize FX 4 and related hardware, aka Summit */
+
+/*
+ * register values, found by disassembling the ROM
+ * some found by Sven Schnelle
+ * ( see https://patchwork.kernel.org/project/linux-parisc/patch/20211031204952.25678-2-svens@stackframe.org/ )
+ * some by me
+ */
+
+#ifndef SUMMITREG_H
+#define SUMMITREG_H
+
+#define VISFX_CONTROL		0x641000
+	#define CONTROL_WFC	0x00000200	// FIFO when 0, direct when 1
+#define VISFX_FC		0x641040	// Fault Control
+#define VISFX_STATUS		0x641400	// zero when idle
+/*
+ * about the FIFO register:
+ * - on FX4, there are 0x800 FIFO slots, quite a lot
+ * - based on observation, every register write seems to occupy *two* slots
+ * - we need to write 0 to VISFX_CONTROL to enable FIFO pacing
+ * - the FIFO is quite difficult to overrun but things like x11perf copywinwin
+ *   will do it if we're not careful
+ */
+#define VISFX_FIFO		0x641440
+#define VISFX_FOE		0x920404	// Fragment Operation Enable
+	#define FOE_TEXTURE	0x00000001
+	#define FOE_SPECULAR	0x00000002
+	#define FOE_DEPTHCUE	0x00000004
+	#define FOE_ALPHATEST	0x00000008
+	#define FOE_STENCIL	0x00000010
+	#define FOE_Z_TEST	0x00000020
+	#define FOE_BLEND_ROP	0x00000040	// IBO is used
+	#define FOE_DITHER	0x00000080
+#define VISFX_IBO		0x921110	// ROP in lowest nibble
+#define VISFX_CBR		0x92111c	// constant colour for blending
+#define VISFX_IAA0		0x921200	// XLUT, 16 entries
+#define VISFX_IAA(n)		(0x921200 + ((n) << 2))
+#define VISFX_OTR		0x921148	// overlay transparency
+
+#define VISFX_VRAM_WRITE_MODE	0xa00808
+#define VISFX_VRAM_READ_MODE	0xa0080c
+#define VISFX_PIXEL_MASK	0xa0082c
+#define VISFX_FG_COLOUR		0xa0083c
+#define VISFX_BG_COLOUR		0xa00844
+#define VISFX_PLANE_MASK	0xa0084c
+/* this controls what we see in the FB aperture */
+#define VISFX_APERTURE_ACCESS	0xa00858
+	#define VISFX_DEPTH_8	0x30
+	#define VISFX_DEPTH_32	0x50
+#define VISFX_RPH		0xa0085c	// read prefetch hint
+	#define VISFX_RPH_RTL	0x80000000	// right-to-left
+	#define VISFX_RPH_LTR	0x00000000	// left-to-right
+
+#define VISFX_READ_DATA		0xa41480
+
+#define VISFX_VRAM_WRITE_DATA_INCRX	0xa60000
+#define VISFX_VRAM_WRITE_DATA_INCRY	0xa68000
+#define VISFX_VRAM_WRITE_DEST		0xac1000
+#define VISFX_TCR			0xac1024	/* throttle control */
+#define VISFX_CLIP_TL		0xac1050	/* clipping rect, top/left */
+#define VISFX_CLIP_WH		0xac1054	/* clipping rect, w/h */
+
+#define VISFX_WRITE_MODE_PLAIN	0x02000000
+#define VISFX_WRITE_MODE_EXPAND	0x050004c0
+#define VISFX_WRITE_MODE_FILL	0x050008c0
+#define VISFX_WRITE_MODE_TRANSPARENT	0x00000800	/* bg is tansparent */
+#define VISFX_WRITE_MODE_MASK		0x00000400	/* apply pixel mask */
+/* 0x00000200 - some pattern */
+/* looks like 0x000000c0 enables fb/bg colours to be applied */
+
+#define VISFX_READ_MODE_COPY	0x02000400
+
+#define OTC01	0x00000000	/* one pixel per 32bit write */
+#define OTC04	0x02000000	/* 4 pixels per 32bit write */
+#define OTC32	0x05000000	/* 32 pixels per 32bit write */
+#define BIN8I	0x00000000	/* 8bit indexed */
+#define BIN12I	0x00010000	/* 12bit indexed */
+#define BIN332F	0x00040000	/* R3G3B2 */
+#define BIN8F	0x00070000	/* ARGB8 */
+#define BINapln	0x00110000	/* attribute plane */
+#define BINhost	0x00300000	/* DMA to host */
+#define BUFovl	0x00000000	/* 8bit overlay */
+#define BUFBL	0x00008000	/* back/left */
+#define BUFFL	0x00004000	/* front/left */
+#define BUFBR	0x00002000	/* back/right */
+#define BUFFR	0x00001000	/* front/right */
+
+/* attribute table, this only selects depth and CFS */
+#define IAA_8I		0x00000000	/* 8bit CI */
+#define IAA_8F		0x00000070	/* RGB8 */
+#define IAA_CFS0	0x00000000	/* CFS select */
+#define IAA_CFS1	0x00000100	/* CFS 1 etc. */
+
+#define OTR_T	0x00010000	/* when set 0 is transparent, otherwise 0xff */
+#define OTR_A	0x00000100	/* always transparent */
+#define OTR_L1	0x00000002	/* transparency controlled by CFS17 */
+#define OTR_L0	0x00000001	/* transparency controlled by CFS16 */
+
+/*
+ * for STI colour change mode:
+ * set VISFX_FG_COLOUR, VISFX_BG_COLOUR
+ * set VISFX_VRAM_READ_MODE 0x05000400
+ * set VISFX_VRAM_WRITE_MODE 0x050000c0
+ */
+
+/* fill */
+#define VISFX_START		0xb3c000
+#define VISFX_SIZE		0xb3c808	/* start, FX4 uses 0xb3c908 */
+
+/* copy */
+#define VISFX_COPY_SRC		0xb3c010
+#define VISFX_COPY_WH		0xb3c008
+#define VISFX_COPY_DST		0xb3cc00
+/*
+ * looks like ORing 0x800 to the register address starts a command
+ * - 0x800 - fill
+ * - 0xc00 - copy
+ * 0x100 and 0x200 seem to have functions as well, not sure what though
+ * for example, the FX4 ROM uses 0xb3c908 to start a rectangle fill, but
+ * it also works with 0xb3c808 and 0xb3ca08
+ * same with copy, 0xc00 seems to be what matters, setting 0x100 or 0x200
+ * doesn't seem to make a difference
+ * 0x400 or 0x100 by themselves don't start a command either
+ */
+
+/*
+ * alpha blending operations
+ * source and destination blend functions are in 0xf0 and 0x0f
+ * how they're combined is in 0x700
+ */
+#define IBO_ROP		0	/* ROP in lower 4 bit */
+#define IBO_ADD		0x200
+#define IBO_S_MINUS_D	0x400	/* source - dest */
+#define IBO_D_MINUS_S	0x500	/* dest - source */
+#define IBO_MIN		0x600
+#define IBO_MAX		0x700
+
+/* 
+ * here are the blend functions I identified
+ * apparently the upper byte in 32bit mode is not implemented on FX2/4/6, and
+ * neither is any blend mode that takes the colour value from CBR
+ * so no blending with screen-to-screen blits, alpha will always read zero
+ * the only ways to actually use alpha blending is with fills ( the alpha part
+ * of the FG register is used ) and BINC writes, or when using constant alpha
+ */
+#define IBO_ZERO		0
+#define IBO_ONE			1
+#define IBO_SRC			4	/* src alpha */
+#define IBO_ONE_MINUS_SRC	5	/* 1 - src alpha */
+#define IBO_CBR			14	/* alpha from CBR */
+#define IBO_ONE_MINUS_CBR	15	/* 1 - alpha from CBR */
+
+#define SRC(n) ((n) << 4)
+#define DST(n) (n)
+/*
+ * use unbuffered space for cursor registers
+ * The _POS, _INDEX and _DATA registers work exactly like on HCRX
+ */
+
+#define VISFX_CURSOR_POS	0x400000
+#define VISFX_CURSOR_ENABLE	0x80000000
+#define VISFX_CURSOR_INDEX	0x400004
+#define VISFX_CURSOR_DATA	0x400008
+#define VISFX_CURSOR_FG		0x40000c
+#define VISFX_CURSOR_BG		0x400010
+#define VISFX_COLOR_MASK	0x800018
+#define VISFX_COLOR_INDEX	0x800020
+#define VISFX_COLOR_VALUE	0x800024
+#define VISFX_FATTR		0x80003c	/* force attribute */
+#define VISFX_MPC		0x80004c
+	#define MPC_VIDEO_ON	0x0c
+	#define MPC_VSYNC_OFF	0x02
+	#define MPC_HSYNC_OFF	0x01
+#define VISFX_CFS0		0x800100	/* colour function select */
+#define VISFX_CFS(n)		(VISFX_CFS0 + ((n) << 2))
+/* 0 ... 6 for image planes, 7 or bypass, 16 and 17 for overlay */
+#define CFS_CR		0x80	// enable color recovery
+#define CFS_332		0x00	// R3G3B2
+#define CFS_8I	 	0x40	// 8bit indexed
+#define CFS_8F		0x70	// ARGB8
+#define CFS_LUT0	0x00	// use LUT 0
+#define CFS_LUT1	0x01	// LUT 1 etc.
+#define CFS_BYPASS	0x07	// bypass LUT
+
+#endif	/* SUMMITREG_H */

package/libc/include/generic-netbsd/dev/iscsi/iscsi.h

@@ -1,4 +1,4 @@
-/*	$NetBSD: iscsi.h,v 1.4.50.1 2023/12/18 14:15:58 martin Exp $	*/
+/*	$NetBSD: iscsi.h,v 1.5 2023/11/25 10:08:27 mlelstv Exp $	*/
 
 /*-
  * Copyright (c) 2004,2006,2011 The NetBSD Foundation, Inc.

package/libc/include/generic-netbsd/dev/pci/amrreg.h

@@ -1,4 +1,4 @@
-/*	$NetBSD: amrreg.h,v 1.5 2008/09/08 23:36:54 gmcgarry Exp $	*/
+/*	$NetBSD: amrreg.h,v 1.6 2023/08/15 04:04:10 mrg Exp $	*/
 
 /*-
  * Copyright (c) 2002, 2003 The NetBSD Foundation, Inc.
@@ -313,7 +313,7 @@ struct amr_enquiry3 {
 	u_int8_t	ae_driveprop[AMR_40LD_MAXDRIVES];	/* logical drive properties */
 	u_int8_t	ae_drivestate[AMR_40LD_MAXDRIVES];	/* physical drive state */
 	u_int8_t	ae_pdrivestate[AMR_40LD_MAXPHYSDRIVES]; /* physical drive state */
-	u_int16_t	ae_driveformat[AMR_40LD_MAXPHYSDRIVES];
+	u_int16_t	ae_driveformat[AMR_40LD_MAXPHYSDRIVES / 16];
 	u_int8_t	ae_targxfer[80];			/* physical drive transfer rates */
 
 	u_int8_t	res1[263];		/* pad to 1024 bytes */

package/libc/include/generic-netbsd/dev/pci/mlyreg.h

@@ -1,4 +1,4 @@
-/*	$NetBSD: mlyreg.h,v 1.8 2021/10/24 20:00:11 andvar Exp $	*/
+/*	$NetBSD: mlyreg.h,v 1.9 2024/02/10 09:21:53 andvar Exp $	*/
 
 /*-
  * Copyright (c) 2001 The NetBSD Foundation, Inc.
@@ -1242,7 +1242,7 @@ union mly_cmd_packet {
  * PG6: 5.4.4 Doorbell 1
  *
  * Note that the documentation claims that these bits are set when the
- * status queue(s) are empty, wheras the Linux driver and experience
+ * status queue(s) are empty, whereas the Linux driver and experience
  * suggest they are set when there is status available.
  */
 #define	MLY_HM_STSREADY			(1<<0)