@wireio/stake 0.4.2 → 0.4.69

package/README.md

@@ -1,275 +1,217 @@
-# @wireio/stake — LIQ Staking SDK
-
-TypeScript SDK for interacting with the **Liquidity Staking System (LIQ)** on **Wire Network**.
-
-- **Today:** Solana (Wire testnet) implementation
-- **Next:** Ethereum (shared interface, coming soon)
-- **Later:** Sui and additional chains (all conforming to the same `IStakingClient` interface)
-
----
-
-## Features
-
-- 🔑 Unified **Staker** facade across multiple chains  
-- 💸 **Deposit** (stake) funds on supported networks  
-- 🧾 **Register** untracked liquid stake tokens (correct & register flow on Solana)  
-- 📊 **Portfolio** helper (native / actual / tracked balances)  
-- 🧱 Low-level Solana clients:
-  - `DepositClient` – builds & submits deposit transactions
-  - `DistributionClient` – balance reconciliation & registration (updateUser)
-  - `ValidatorLeaderboardClient` – Interact with the validator leaderboard program
-- 🧩 Clean, typed program access via `SolanaProgramService`
-
----
+# @wireio/stake — Outpost & LIQ Staking SDK
+
+TypeScript / JavaScript SDK for the **Outpost** and **Liquidity Staking (LIQ)** protocol on the **Wire Network**.
+It gives dApps a single façade (`Staker`) over Solana and EVM implementations, while still exposing
+chain‑specific power features (Outpost, pretokens, SquadsX, validator tools, etc.).
+
+## What this SDK does
+- One `Staker` that selects the right chain client by `chainId`.
+- Deposit / withdraw native → LIQ tokens (SOL→liqSOL, ETH→liqETH).
+- Stake / unstake LIQ into yield pools (Solana Outpost; Ethereum staking manager).
+- Pre-launch WIRE pretokens purchase helpers.
+- Rich `getPortfolio` view (native, liq, staked, $WIRE, yield, extras).
+- Gas / fee helpers (`getDepositFee`, `getDepositBuffer`, `getSystemAPY`).
+- Solana extras: balance correction + registration, Outpost state, multisig (SquadsX) flows.
+- Ethereum extras: withdrawal receipts, validator deposit/lock, tranche snapshots.
+
+## SquadsX (Solana multisig) at a glance
+- Pass `extras.squadsX` when constructing a Solana `StakerConfig`:
+  ```ts
+  const cfg: StakerConfig = {
+    provider: solAdapter,
+    network: solNetwork,
+    pubKey: new WirePubKey(KeyType.ED, solAdapter.publicKey!.toBytes()),
+    extras: { squadsX: { multisigPDA: '<base58>', vaultIndex: 0 } },
+  };
+  ```
+- When present, every write call (`deposit`, `withdraw`, `stake`, `unstake`, `buy`) is wrapped as a Squads vault transaction via `sendSquadsIxs`, producing a proposal that you approve/execute in Squads.  
+- The Hub staking service persists the PDAs in `localStorage` (`hub_squadsx_multisigpda`, `hub_squadsx_vaultindex`) and reinitializes the `Staker` with Squads enabled; copy that pattern for multisig-first apps.
+
+## Mental model
+- **Facade first:** Use `Staker` everywhere; it routes to the right chain client and keeps the API identical.
+- **Base units only:** All amounts are lamports/wei (no floats internally).
+- **Read-only vs write:** If you omit `provider`/`pubKey`, clients spin up in **read-only** mode—perfect for tranche snapshots, APY, and portfolio lookups against public RPCs. Add a signer (`provider` + `pubKey`) to unlock writes (deposit/withdraw/stake/unstake/buy/register). The Hub service uses read-only configs to prefill dashboards before wallets connect, then re-initializes with signer configs once a wallet is present.
+- **State views:** `getPortfolio()` is the fastest way to know “native, liq, staked, $WIRE, yield” plus handy PDAs/addresses.
+- **Snapshots:** `getTrancheSnapshot(chainId)` powers price ladders, liquidity/utilization charts, and native USD hints.
+
+## Supported networks (today)
+- **Solana**: `SolChainID.Mainnet`, `SolChainID.Devnet`.
+- **EVM**: `EvmChainID.Ethereum`, `EvmChainID.Hoodi` (testnet).
+
+The unified interface is chain-id driven: `new Staker(configs, selectedChainId)` builds per-chain clients behind the scenes, and `staker.setChain(chainId)` swaps the active client. Adding future chains (e.g., Sui) only requires implementing `IStakingClient` and wiring its `chainId` into the router—no API changes for consuming apps.
 
 ## Installation
-
-The package is published on npm.
-
 ```bash
 npm install @wireio/stake
 ```
+Peer requirement: `@wireio/core >=0.1.0 <0.4.0`.
 
----
-
-## Getting Started
-
-### 1) Construct a `Staker`
-
-Create the staker with one or more chain configs (only Solana client is active today):
+## Quick start: pick a chain, then call through `client`
 
 ```ts
-import { Staker, StakerConfig } from '@wireio/stake';
+import { Staker, StakerConfig, SolChainID, EvmChainID } from '@wireio/stake';
 import { PublicKey as WirePubKey, KeyType } from '@wireio/core';
 import { BaseSignerWalletAdapter } from '@solana/wallet-adapter-base';
+import { ethers } from 'ethers';
 
-// Example: Solana (Wire testnet)
-const adapter: BaseSignerWalletAdapter = /* your connected wallet adapter */;
-const network = {
-  chainId: 13371337,               // your Wire testnet chain ID
-  name: 'Wire Testnet',
-  rpcUrls: ['https://...http', 'wss://...ws'],
-  nativeCurrency: { symbol: 'SOL', decimals: 9 }
+// ---- Solana example (wallet adapter) ----
+const solAdapter: BaseSignerWalletAdapter = /* connected wallet */;
+const solCfg: StakerConfig = {
+  provider: solAdapter,
+  network: {
+    chainId: SolChainID.Devnet,
+    name: 'Wire Solana Devnet',
+    rpcUrls: ['https://...', 'wss://...'],
+    nativeCurrency: { symbol: 'SOL', decimals: 9 },
+  },
+  pubKey: new WirePubKey(KeyType.ED, solAdapter.publicKey!.toBytes()),
+  extras: { squadsX: { multisigPDA: '<base58>', vaultIndex: 0 } }, // optional
 };
 
-const cfg: StakerConfig = {
-  provider: adapter,
-  network,
-  pubKey: new WirePubKey(KeyType.ED, adapter.publicKey!.toBytes()),
+// ---- Ethereum example (browser provider) ----
+const ethProvider = new ethers.providers.Web3Provider(window.ethereum);
+const ethCfg: StakerConfig = {
+  provider: ethProvider,
+  network: {
+    chainId: EvmChainID.Ethereum,
+    name: 'Ethereum',
+    rpcUrls: ['https://...'],
+    nativeCurrency: { symbol: 'ETH', decimals: 18 },
+  },
 };
 
-const staker = new Staker(cfg /* or [cfg1, cfg2, ...] */, network.chainId);
+const staker = new Staker([solCfg, ethCfg], SolChainID.Devnet); // default active chain
+const client = staker.client; // typed staking client for the selected chain
 ```
 
-> **Note:** If you pass multiple networks, `Staker` can switch between them via `staker.setChain(chainId)`.
-
-### 2) Get the active client &amp; portfolio
-
+### Common calls
+Amounts are always **base units** (lamports / wei).
 ```ts
-const client = staker.client;          // current chain’s client (or undefined if not configured)
-if (!client) throw new Error('Chain not configured');
-
-const portfolio = await client.getPortfolio();
-/**
- * portfolio.native.amount   // wallet SOL in lamports
- * portfolio.actual.amount   // liqSOL in ATA
- * portfolio.tracked.amount  // tracked on distribution program
- */
+await client?.deposit(1_000_000_000n);   // stake 1 SOL -> liqSOL (or 1e9 wei -> liqETH)
+await client?.withdraw(500_000_000n);    // liq -> native withdraw request
+await client?.stake(200_000_000n);       // stake liq into yield pool (Sol Outpost / ETH manager)
+await client?.unstake(100_000_000n);     // reverse stake (where supported)
+await client?.buy(50_000_000n);          // purchase WIRE pretokens with liq
+const portfolio = await client?.getPortfolio(); // unified balance snapshot
 ```
 
-### 3) Deposit
-
-Amounts must be passed in the chain’s **smallest unit** (lamports on Solana, wei on EVM).
-
+### Solana flow (what happens)
+- `deposit(lamports)`: builds ix via `DepositClient`, optionally wraps in SquadsX vault tx, sends and confirms.
+- `withdraw(lamports)`: burns liqSOL and mints a withdrawal NFT receipt (payout later via operators).
+- `stake/unstake`: interacts with Outpost (`synd`/`desynd`) to move liqSOL into/out of yield pool.
+- `buy(lamports)`: purchase $WIRE pretokens using liqSOL (Token-2022).
+- Multisig: if `extras.squadsX` is set, write calls become Squads proposals (`sendSquadsIxs`).
+- Portfolio extras include key PDAs (vault, reserve pool, user ATA) plus Outpost index/shares math.
+
+### Ethereum flow (what happens)
+- `deposit(amountWei)`: via `ConvertClient.performDeposit`; returns tx hash.
+- `withdraw(amountWei)`: burns liqETH and enqueues withdrawal; receipts are NFTs.
+- `getPendingWithdraws()` / `claimWithdraw(tokenId)`: manage withdrawal queue.
+- `stake(amountWei)`: stakes liqETH; `unstakePrelaunch(tokenId, recipient)` handles prelaunch path.
+- `buy(amountWei)`: pretokens via `PretokenClient.purchasePretokensWithLiqETH`.
+- `validatorDeposit()`: validator bond/lock helper.
+- Portfolio includes native/liq/staked/$WIRE and yield (index/shares) when contracts expose them.
+
+## Solana specifics
+- **Clients composed under the hood**: `DepositClient`, `DistributionClient`, `OutpostClient`,
+  `TokenClient`, `ValidatorLeaderboardClient`, `SolanaProgramService`.
+- **SquadsX multisig**: provide `extras.squadsX` to have deposits / stakes wrapped as vault
+  transactions (`sendSquadsIxs`).
+- **Outpost / Yield**: `getPortfolio()` returns `yield` (index-scale math) and `staked` amounts; `wire`
+  reports pretokens (1e8 scale).
+- **Helpers**: `getDepositBuffer`, `getDepositFee`, `getSystemAPY`, tranche snapshots via
+  `getTrancheSnapshot(chainId)`.
+
+## Ethereum specifics
+- Uses `ethers` provider/signer; falls back to JSON RPC for read-only.
+- Modules used: `ConvertClient` (deposit/withdraw), `StakeClient`, `PretokenClient`, `OPPClient`,
+  `ReceiptClient` (withdrawal NFTs), `ValidatorClient`.
+- Additional endpoints:
+  - `getPendingWithdraws()` → pending withdrawal receipts.
+  - `claimWithdraw(tokenId)` → claim queued withdrawal by NFT id.
+  - `unstakePrelaunch(tokenId, recipient)` → prelaunch unstake path.
+  - `validatorDeposit()` → validator bond/lock flow.
+  - `getTrancheSnapshot(chainId)` → pretoken ladder view with price/supply growth.
+  - `getOPPMessages(address?)` and `getEthStats()` for operator/pay-rate data.
+
+## Portfolio shape (all chains)
 ```ts
-// Human → smallest unit (e.g., 0.5 SOL → 0.5 * 10^9)
-const human = 0.5;
-const smallest = Math.round(human * Math.pow(10, client.network.nativeCurrency.decimals));
-
-const sig = await client.deposit(smallest);
-console.log('Deposit tx:', sig);
-```
-
-### 4) Register (Correct &amp; Register on Solana)
-
-Registers any **untracked** liqSOL (if your actual token balance &gt; tracked) and, if necessary,
-first corrects other users with positive tracked deltas to free available balance.
-
-```ts
-const sig = await client.register();
-console.log('Register tx:', sig);
+type Portfolio = {
+  native: { amount: bigint; symbol: string; decimals: number };
+  liq:    { amount: bigint; symbol: string; decimals: number; ata?: PublicKey };
+  staked: { amount: bigint; symbol: string; decimals: number };
+  wire:   { amount: bigint; symbol: string; decimals: number };
+  yield?: { currentIndex: bigint; indexScale: bigint; totalShares: bigint;
+            userShares: bigint; estimatedClaim?: bigint; estimatedYield?: bigint };
+  extras?: Record<string, any>;
+  chainID: number;
+};
 ```
 
----
-
-## Solana-specific Clients (low-level)
-
-You typically don’t need these directly if you use `Staker`, but they’re available.
-
-### `DepositClient`
-
-- `buildDepositTx(user: PublicKey, amount: number)` → `{ transaction, ephemeralStakePubkey }`
-- `deposit(user: PublicKey, amount: number)` → confirmed signature
-
-### `DistributionClient`
-
-- `getDistributionState()`, `getUserRecord(user)`
-- `getActualBalance(user)`, `getTrackedBalance(user)`
-- `updateUser(targetUser)` – register/correct a user
-- `buildCorrectRegisterTx({ amount?, preloadCandidates? })` – build a tx that:
-  - if your mismatch &lt; 0 → just **correct self**
-  - else → **free available** by updating top candidates, then **register self**
-
----
-
-## Core Types
+## Error handling
+- All write methods throw on failure; wrap with `try/catch`.
+- Solana transaction failures include logs; Ethereum methods surface tx hashes for inspection.
+- Passing `provider` is required for writes; read-only is supported for many getters.
 
+## Using from a service (pattern)
+Your `staking.service.ts` can simply forward to the selected `client`. The Wire Hub webapp
+(`wire-hub-webapp/src/app/_services/staking.service.ts`) does this and adds read-only Outpost
+clients, tranche/APY polling, SquadsX, and retryable portfolio refresh. Typical shape:
 ```ts
-import { BaseSignerWalletAdapter } from '@solana/wallet-adapter-base';
-import { PublicKey as SolPubKey } from '@solana/web3.js';
-import { ExternalNetwork, PublicKey } from '@wireio/core';
-import { ethers } from 'ethers';
-
-export interface IStakingClient {
-  pubKey: PublicKey;
-  network: ExternalNetwork;
-
-  /** Amount is in the chain's smallest unit (lamports/wei, etc.) */
-  deposit(amount: number): Promise<string>;
-
-  /** Register any untracked LIQ staked tokens */
-  register(): Promise<string>;
-
-  /** Fetch the portfolio for the LIQ stake user */
-  getPortfolio(): Promise<Portfolio>;
-}
-
-export type StakerConfig = {
-  network: ExternalNetwork;
-  provider: BaseSignerWalletAdapter | ethers.providers.Web3Provider;
-  pubKey: PublicKey;
-}
-
-export interface Portfolio {
-  /** Native SOL balance on chain */
-  native: BalanceView;
-  /** Actual liquid SOL balance from ATA */
-  actual: BalanceView;
-  /** Tracked liquid SOL balance from distribution program */
-  tracked: BalanceView;
-  /** Extra PDAs and account addresses */
-  extras?: Record&lt;string, any&gt;;
+export class StakingService {
+  constructor(private staker: Staker) {}
+  deposit(amount: bigint) { return this.staker.client?.deposit(amount); }
+  withdraw(amount: bigint) { return this.staker.client?.withdraw(amount); }
+  stake(amount: bigint) { return this.staker.client?.stake(amount); }
+  unstake(amount: bigint) { return this.staker.client?.unstake(amount); }
+  buy(amount: bigint) { return this.staker.client?.buy(amount); }
+  portfolio() { return this.staker.client?.getPortfolio(); }
+  stats(chainId: number) { return this.staker.client?.getTrancheSnapshot(chainId); }
 }
-
-export type BalanceView = {
-  amount: bigint;   // raw on-chain integer value
-  decimals: number; // number of decimal places
-  symbol?: string;  // optional token symbol identifier
-  ata?: SolPubKey;  // associated token account address
-};
 ```
-
----
-
-## Multi-chain Notes &amp; Roadmap
-
-- **Ethereum** client is planned (will implement `IStakingClient` with the same methods).
-- **Sui** (and other chains) to follow the same interface for a unified developer experience.
-- Your app can rely on the `Staker` facade today and gain new chains later without API changes.
-
----
-
-## Error Handling
-
-- All public methods throw on failure. Wrap calls with `try/catch` and surface errors to your users.
-- For Solana, failed transactions carry logs; some SDK methods surface logs in thrown errors.
-
----
-
-## Development
-
-Requires:
-
-- **Node.js** (LTS recommended)
-- **npm**
-- **Make** (optional, for convenience targets)
-
-Common tasks:
-
+Switch chains at runtime with `staker.setChain(chainId)`.
+
+Hub-specific extras you can reuse:
+- Read-only bootstrap: configs with only `network` to fetch tranche snapshots/APY before a wallet connects.
+- APY helpers: `getSystemAPY()` per chain; normalize number/string/bigint shapes.
+- Deposit buffer: `getDepositBuffer({ balanceOverrideLamports })` to compute max-spendable.
+- SquadsX multisig: store `multisigPDA` + `vaultIndex` (localStorage keys `hub_squadsx_multisigpda`, `hub_squadsx_vaultindex`) and pass via `extras.squadsX` so write calls become Squads proposals.
+- ETH prelaunch/receipts: `getPendingWithdraws`, `claimWithdraw(tokenId)`, `unstakePrelaunch(tokenId, recipient)`, `fetchPrelaunchReceipts`.
+- Tranche ladders: cache `getTrancheSnapshot(chainId)` per chain for dashboards (liquidity/utilization/arb spread).
+
+## Portfolio fields (returned by `getPortfolio`)
+- `native`: wallet balance in base units; symbol/decimals from network.
+- `liq`: liquid staking token balance (Token-2022 ATA on Sol; ERC-20 on EVM).
+- `staked`: liq staked into Outpost (Sol) or staking manager (ETH).
+- `wire`: pretoken balance (1e8 scale).
+- `yield`: `currentIndex`, `indexScale`, `totalShares`, `userShares`, `estimatedClaim`, `estimatedYield`.
+- `extras`: PDAs, price/index hints useful for UIs and debugging.
+- `chainID`: the chain the snapshot came from.
+
+## Tranche snapshot fields (via `getTrancheSnapshot`)
+- `currentTranche`, `currentPriceUsd` (1e8), `currentTrancheSupply`, `initialTrancheSupply`.
+- `ladder`: nearby rows `{ id, capacity, sold, remaining, priceUsd }` (1e8 scale).
+- `currentIndex`, `totalShares`, `totalPretokensSold`, `supplyGrowthBps`, `priceGrowthCents`.
+- `nativePriceUsd` if available (SDK backfills from market data when the chain doesn’t provide it).
+
+## Building, testing, docs
 ```bash
-# Install deps
-npm ci
-
-# Build
-npm run prepare
-```
-
----
-
-## Testnet Deployment 11/19/25
-```
-RPC URL: https://sol.gitgo.app/
-Deploying cluster: http://solana-genesis:8899
-Upgrade authority: ./wallets/deploymentWallet/universalDeploymentWallet.json
-Deploying program "liq_sol_token"...
-Program path: /app/program/target/deploy/liq_sol_token.so...
-Program Id: FsRiJLqerifBSpZjzdWxSyJ3sQmJ3ScFwHv4VRi9ghVT
-
-Signature: 26JPXjiNXBzPk7p8PQx8y1bQog1baWCjyRqWYyQKNxEpK9reAHpeNwcw9Sh7dAyaAhyuosQueE4XrnTZibXdwx99
-
-Deploying program "validator_leaderboard"...
-Program path: /app/program/target/deploy/validator_leaderboard.so...
-Program Id: 9SW7GqRTzEc5KjSnXXTqvojcyCvzHjn8J4xdBeS91Gbq
-
-Signature: 5nobXLXnnMD9MmPjcJ5xbmawV4wDXxCYEBR2CwoBkvEQ4iLAVQCpzZWw7Pgb7eGwk6bu88VvpC2occCJh2EYajfJ
-
-Deploying program "liqsol_core"...
-Program path: /app/program/target/deploy/liqsol_core.so...
-Program Id: 8zBGapo9WvnGskgXyKmgNgLACimELqJzAPEHyShWg5Dj
-
-Signature: 2wakzKzaxkRLC4nMw3t8pCSL4PfG32EoSKZXo6og8mAgVq54twWUhqG5JLAQejvsqGgEBaZ7zwWj9tvsijt8vwbi
-
-Deploy success
-🪙 Initializing token mint...
-🚀 Initializing Liquid SOL Token...
-
-📍 Mint Authority PDA: 3XwUD4Sy6Aua1ceC8yEHTWk16vMmmWAdFMfJpzwvwveD
-🪙 Deterministic Mint Address: Empuao5KEK7zq3rFz8Q8fVSmNwhbkrqkNctdfZKdY9b2
-🔗 Network: http://solana-genesis:8899
-👤 Payer: Ebar1nLiEpHEFH4DmYasqJHMm3fn6g1jJY3WBfwc6GsD
-📝 Token Name: Liquid Staked SOL
-🏷️  Token Symbol: liqSOL
-
-🏦 Receiver ATA: 3B9dtsRGYvB1aVQYR8yHfzbbECgohHkH7U67v6gPJ1HQ
-🔄 Sending mint creation transaction...
-✅ Liquid SOL Token mint created! Transaction: 5fgNuuNorhBcvjp28AQhHK1jkSG6fRCPBbxsHbEnB3CyuRYPRTGybH2gjLhGdb7kD8CUohibUzd1wnPLUDUauret
-
-📊 Created Mint Information:
-   Mint Address: Empuao5KEK7zq3rFz8Q8fVSmNwhbkrqkNctdfZKdY9b2
-   Mint Authority: 3XwUD4Sy6Aua1ceC8yEHTWk16vMmmWAdFMfJpzwvwveD
-   Token Name: Liquid Staked SOL
-   Token Symbol: liqSOL
-   Decimals: 9
-   Receiver ATA: 3B9dtsRGYvB1aVQYR8yHfzbbECgohHkH7U67v6gPJ1HQ
-
-🎉 Liquid SOL Token is ready to use!
-   Mint Address: Empuao5KEK7zq3rFz8Q8fVSmNwhbkrqkNctdfZKdY9b2
-   Program ID: FsRiJLqerifBSpZjzdWxSyJ3sQmJ3ScFwHv4VRi9ghVT
-   Mint Authority PDA: 3XwUD4Sy6Aua1ceC8yEHTWk16vMmmWAdFMfJpzwvwveD
-▶ Initializing Distribution Program...
-  Distribution Program: 8zBGapo9WvnGskgXyKmgNgLACimELqJzAPEHyShWg5Dj
-  Wallet: Ebar1nLiEpHEFH4DmYasqJHMm3fn6g1jJY3WBfwc6GsD
-  LiqSOL Mint: Empuao5KEK7zq3rFz8Q8fVSmNwhbkrqkNctdfZKdY9b2
-  Distribution State PDA: BHMC9S1J8jy7nitVt4CHGeRHVK8kh9jpm4xKhf4cJWgn
+npm ci            # install
+npm run prepare   # build to lib/ via rollup
+npm test          # full test suite (make targets exist for sol/eth split)
+npm run docs      # generate typedoc to docs/ (gh-pages ready)
 ```
 
-## Autodocs
-
-- **API Docs:** <https://Wire-Network.github.io/sdk-stake/>
-- **Coverage:** coming soon
-
----
+## Project structure (src/)
+- `staker.ts` – chain router / façade.
+- `types.ts` – shared interfaces (IStakingClient, Portfolio, tranche snapshots).
+- `networks/solana/*` – clients, IDL wiring, constants, utils.
+- `networks/ethereum/*` – contract service, clients, tranche math.
+- `assets/` – IDLs, ABIs, artifacts.
 
-## License
+## Versioning & license
+- License: **FSL-1.1-Apache-2.0** (see `LICENSE.md`).
 
-MIT – see [LICENSE](./LICENSE).
+## Links
+- API reference: <https://Wire-Network.github.io/sdk-stake/>
+- Source: <https://github.com/Wire-Network/sdk-stake>