@winkjs/composer 0.0.2 → 0.4.1

package/src/core/storage-manager/questdb/persist-plan.js

@@ -0,0 +1,488 @@
+// core/storage-manager/questdb/persist-plan.js
+
+/**
+ * @fileoverview Build per-insightType persist plans from asset class definition.
+ *
+ * Pre-compiles column writers at startup for allocation-minimized hot path.
+ * Each persist plan is a closure that writes a message to QuestDB via ILP.
+ *
+ * Integration with persist-if node:
+ * - persist-if calls: state.storage.write(insightType, msg, partitionId)
+ * - Persist plan signature: persistRow(sender, message, partitionId)
+ *   (Note: partitionId is internal name, written as 'assetId' column)
+ *
+ * designatedTimestamp handling:
+ * - Validated by semantics loader at startup
+ * - Used here to call sender.at() which ends the ILP row
+ * - Other timestamp columns use sender.timestampColumn()
+ *
+ * Two-phase rows — validate, then write (ADR-018: a rejected message
+ * costs only itself):
+ * - Phase 1 checks every column value against its declared type without touching
+ *   the sender. Phase 2 opens the ILP row and writes only the values that passed;
+ *   a failed value costs that column, with a warning naming the expected and
+ *   received types — never a coercion.
+ * - Why the order matters: a value the client rejects mid-row (a number handed to
+ *   a string column) throws AFTER sender.table() and BEFORE sender.at(), leaving
+ *   the sender wedged on a half-written row — every later write then fails. One
+ *   wrong value silently killed 98.6% of a replay's writes in the 2026-06-10
+ *   silent-write-failure incident. Checking every value before the row opens
+ *   means the row is never started unless it will complete.
+ *   For that to hold, phase 1's acceptance checks must match the writers' REAL
+ *   domain — the client requires integers for int64/timestamp columns and for
+ *   the designated timestamp, so a merely-finite check would let a fractional
+ *   value through to a mid-row throw (found and fixed 2026-07-07). The
+ *   recoverSender() backstop in index.js contains any residual mismatch to
+ *   one row.
+ * - Warnings fire in phase 1 too, before the row opens, so the documented
+ *   strict mode (an `onWarning` that throws) rejects a bad row with the sender
+ *   untouched.
+ *
+ * Async-flush failures — the no-silent-failures contract:
+ * - @questdb/nodejs-client v4 declares sender.at() as async; the buffer
+ *   mutation is sync but the trailing `await this.tryFlush()` can fire a
+ *   network flush. When that flush fails (HTTP timeout, buffer overflow,
+ *   QDB unreachable), the rows in that batch are dropped. Per composer's
+ *   "no silent failures" contract, those drops MUST surface loudly.
+ *
+ *   Failures are routed through the `onDeliveryFailure` callback. When
+ *   a caller provides one, they own the response (log, retry, alert,
+ *   stop the flow). When none is provided, the catch handler **throws**
+ *   the failure so it surfaces as an unhandled rejection and the
+ *   process crashes loudly — better than running on with silently
+ *   missing data.
+ *
+ *   This separates two concerns:
+ *     - `onWarning` — soft, per-row data quality (NaN in float column,
+ *       null where a value was expected, invalid designated timestamp).
+ *       These are routine ETL realities; default behaviour stays
+ *       log-and-skip. One warning fires once per insightType instead
+ *       of per row: a record field named 'assetId' that differs from
+ *       the partition id. That mistake sits in the flow's
+ *       configuration, not in the data, so every row would repeat it.
+ *       The field is ignored either way; the column stores the
+ *       partition id.
+ *     - `onDeliveryFailure` — hard, batch-level data loss. Default
+ *       behaviour: throw, so production cannot run with silent drops.
+ *
+ * `err.code` (setup-time throws per ADR-018 fail-fast setup):
+ * - `INVALID_CONFIG` — buildPersistPlans called with non-function
+ *   `onWarning` or non-function `onDeliveryFailure`; or a table/column name
+ *   the client's own ILP rules reject (checked at plan build by driving each
+ *   name through a throwaway client buffer — a name is not a value, so the
+ *   per-message phase 1 below cannot catch it).
+ *
+ * `err.code` (runtime throws / unhandled rejections):
+ * - `DELIVERY_FAILED` — sender.at() async flush rejected and no
+ *   `onDeliveryFailure` callback was provided.
+ *
+ * @see docs/architecture/storage-layer.md
+ * @see ADR-018
+ */
+
+import { SenderBufferV1 } from '@questdb/nodejs-client';
+
+import { QUEST_WRITERS, writeAsString, createFloat64Writer } from './writers.js';
+
+// ============================================================================
+// DEFAULT WARNING HANDLER
+// ============================================================================
+
+/**
+ * Default warning handler for invalid column values.
+ * Logs to console in WinkComposer format.
+ *
+ * Validation behavior:
+ * - null/undefined columns: skip column only (QuestDB stores NULL)
+ * - NaN/Infinity in numeric columns: skip column only (QuestDB stores NULL)
+ * - Wrong-typed column values (e.g. a number where the column is string-typed):
+ *   skip column only, never coerce — the warning names the expected and
+ *   received types
+ * - Invalid designatedTimestamp: skip entire row
+ *
+ * For strict mode (throw on any invalid), provide:
+ *   { onWarning: (msg) => { throw new Error(msg); } }
+ *
+ * Future extension: return value may control skip-row vs skip-column behavior.
+ *
+ * @param {string} message - Warning message describing the issue
+ */
+const defaultOnWarning = function ( message ) {
+    console.warn( `WinkComposer/questdb: ${message}` );
+};
+
+/**
+ * Check if column type requires numeric validation (NaN/Infinity check).
+ *
+ * @param {string} type - Column type from semantics
+ * @returns {boolean} true if type should be validated for finite values
+ */
+const isNumericType = ( type ) => type === 'float64' || type === 'int64' || type === 'timestamp';
+
+/**
+ * Per-type value checks, pre-resolved at plan build time — the same dispatch idea
+ * as QUEST_WRITERS. Each check answers one question: may this value be handed to
+ * the matching writer? A value that fails is skipped with a warning — never
+ * coerced. Coercion would "work" and silently persist garbage (String( 0.79 )
+ * into a text column); the warning is what tells the author their glue is wrong.
+ *
+ * A column type outside this map falls back to the write-as-string writer, which
+ * accepts any value, so its check accepts any value too (acceptAny below).
+ *
+ * @type {Object.<string, function(*): boolean>}
+ */
+const ACCEPTS = Object.create( null );
+ACCEPTS.float64 = ( value ) => Number.isFinite( value );
+// The client's integer writers REQUIRE integers — probe-verified against
+// 4.2.0: intColumn( 'c', 1.5 ) throws "Value must be an integer" and
+// timestampColumn( 'c', 1.5, 'ms' ) throws "Timestamp value must be an
+// integer or BigInt". A finite non-integer passing phase 1 would throw
+// mid-row in phase 2 — the exact wedge this file exists to prevent.
+// bigint is accepted: the int64/timestamp writers document
+// `number|bigint` and convert before the client call.
+ACCEPTS.int64 = ( value ) => Number.isInteger( value ) || typeof value === 'bigint';
+ACCEPTS.timestamp = ACCEPTS.int64;
+ACCEPTS.string = ( value ) => typeof value === 'string';
+ACCEPTS.bool = ( value ) => typeof value === 'boolean';
+
+/**
+ * Acceptance check for column types without a dedicated writer: the
+ * write-as-string fallback stringifies anything, so any value is writable.
+ *
+ * @returns {boolean} always true
+ */
+const acceptAny = () => true;
+
+/**
+ * Builds the reason text for a value that failed its phase-1 acceptance
+ * check. Called only on the rare skip path, so its allocations are
+ * acceptable (same budget as the error returns in index.js).
+ *
+ * @param {*} rawValue - the rejected value
+ * @param {boolean} isNumeric - whether the column type is numeric
+ * @param {string} expectedType - declared column type, named in the message
+ * @returns {string} plain reason text for the skip warning
+ */
+const skipReason = function ( rawValue, isNumeric, expectedType ) {
+    if ( rawValue === null ) return 'null';
+    if ( rawValue === undefined ) return 'undefined';
+    if ( isNumeric && typeof rawValue === 'number' ) {
+        if ( Number.isNaN( rawValue ) ) return 'NaN';
+        // A finite number can only be rejected by the integer-required
+        // types (int64/timestamp/designated timestamp) — float64 accepts
+        // every finite number.
+        return Number.isFinite( rawValue ) ? 'non-integer' : 'non-finite';
+    }
+    return `wrong-typed (expected ${expectedType}, received ${typeof rawValue})`;
+}; // skipReason()
+
+/**
+ * Asserts every ILP name a plan will write — the table name and each column
+ * name — by driving them once through a throwaway client buffer, so the
+ * client's OWN name rules do the checking. No mirrored rules that could
+ * drift from the client; the validator is the client.
+ *
+ * Why here, at plan build: phase 1 validates VALUES per message, but a name
+ * is not a value — a bad name would surface as a mid-row client throw at
+ * write time, the very failure mode the two-phase split exists to prevent.
+ * Names come from the asset class, which is fully known at startup, so a bad
+ * one fails the deployment here with a classified INVALID_CONFIG instead of
+ * failing the stream later.
+ *
+ * The scratch buffer is reset before each name, so nothing accumulates and
+ * a long column list can never trip a buffer limit.
+ *
+ * @param {string} tableName - Fully built table name ({prefix}_{insightType})
+ * @param {string[]} columnNames - Column names the plan will write
+ * @throws {Error} classified `INVALID_CONFIG` naming the offending name
+ */
+const assertIlpNames = function ( tableName, columnNames ) {
+    // Client defaults suffice: name validation depends only on the client's
+    // default max name length (127), matching the sender the plans run on.
+    const scratch = new SenderBufferV1( {} );
+    let kind = 'table name';
+    let current = tableName;
+    try {
+        scratch.table( tableName );
+        kind = 'column name';
+        for ( let i = 0; i < columnNames.length; i += 1 ) {
+            current = columnNames[ i ];
+            scratch.reset();
+            scratch.table( 't' );
+            scratch.symbol( current, 'x' );
+        }
+    } catch ( err ) {
+        const wrapped = new Error(
+            `WinkComposer/questdb: invalid ILP ${kind} '${current}' — ${err.message}`
+        );
+        wrapped.code = 'INVALID_CONFIG';
+        wrapped.cause = err;
+        throw wrapped;
+    }
+}; // assertIlpNames()
+
+// ============================================================================
+// PERSIST PLAN BUILDER
+// ============================================================================
+
+/**
+ * Build per-insightType persist plans from asset class definition.
+ *
+ * Each plan is a closure that works in two phases — validate, then write:
+ * 1. Phase 1 validates the designatedTimestamp (skips the row if invalid) and
+ *    checks every column value against its declared type. No sender calls.
+ * 2. Phase 2 sets the table name `{tablePrefix}_{insightType}`, writes assetId
+ *    as SYMBOL, writes each column that passed via its pre-resolved type writer
+ *    (a failed column is skipped with a warning), and ends the row with
+ *    sender.at().
+ *
+ * Validation behavior (fault-tolerant, never throws):
+ * - Invalid designatedTimestamp (null/undefined/NaN/Infinity): warn + skip entire row
+ * - null/undefined column: warn + skip column (QuestDB stores NULL)
+ * - NaN/Infinity in numeric column: warn + skip column (QuestDB stores NULL).
+ *   This is the designed end of composer's NaN propagation: an upstream node
+ *   marks an invalid input by publishing NaN, and the persist plan lands it as
+ *   a NULL column while the rest of the row survives.
+ * - Wrong-typed value in any column: warn + skip column, never coerce
+ *
+ * For strict mode, provide onWarning that throws.
+ *
+ * @param {Object} assetClass - Asset class definition with columns and insightTypes
+ * @param {string} tablePrefix - Prefix for table names (typically assetClass.name)
+ * @param {Object} [options] - Optional configuration
+ * @param {function} [options.onWarning] - Soft per-row warning callback for
+ *   invalid values (NaN, null, invalid timestamp). Default: console.warn.
+ * @param {function} [options.onDeliveryFailure] - Hard batch-level failure
+ *   callback for `sender.at()` async flush rejection (HTTP timeout, buffer
+ *   overflow, QDB unreachable). Default: throw — surfaces as an unhandled
+ *   rejection so production cannot run with silent row drops.
+ * @returns {Object.<string, function>} Map of insightType to persistRow function
+ */
+const buildPersistPlans = function ( assetClass, tablePrefix, options ) {
+    const providedOnWarning = options && options.onWarning;
+    const providedOnDeliveryFailure = options && options.onDeliveryFailure;
+
+    if ( providedOnWarning !== undefined && typeof providedOnWarning !== 'function' ) {
+        // Per ADR-018, setup-time throws carry classified err.code.
+        const err = new Error( 'WinkComposer/questdb: onWarning must be a function' );
+        err.code = 'INVALID_CONFIG';
+        throw err;
+    }
+    if ( providedOnDeliveryFailure !== undefined && typeof providedOnDeliveryFailure !== 'function' ) {
+        const err = new Error( 'WinkComposer/questdb: onDeliveryFailure must be a function' );
+        err.code = 'INVALID_CONFIG';
+        throw err;
+    }
+
+    const onWarning = providedOnWarning || defaultOnWarning;
+    const onDeliveryFailure = providedOnDeliveryFailure || null;
+    const plansByInsightType = Object.create( null );
+    const insightTypes = assetClass.insightTypes || Object.create( null );
+    const columns = assetClass.columns;
+
+    const insightTypeNames = Object.keys( insightTypes );
+
+    for ( let i = 0; i < insightTypeNames.length; i += 1 ) {
+        const insightTypeName = insightTypeNames[ i ];
+        const insightTypeSpec = insightTypes[ insightTypeName ];
+        const persistedColumnNames = insightTypeSpec.columns;
+        const designatedTimestamp = insightTypeSpec.designatedTimestamp;
+
+        // The column name 'assetId' is reserved. Composer writes that
+        // column itself, from the partition id. A persisted column with
+        // the same name would make the CREATE TABLE ask for 'assetId'
+        // twice. That happens whether the name appears in the columns
+        // list or as the designated timestamp. Fail fast here and name
+        // the fix; otherwise QuestDB answers at table creation with its
+        // raw "Duplicate column" error. A dictionary column named
+        // 'assetId' that no insightType persists stays legal.
+        if ( persistedColumnNames.includes( 'assetId' ) || designatedTimestamp === 'assetId' ) {
+            const err = new Error(
+                `WinkComposer/questdb: insightType '${insightTypeName}' uses reserved column name 'assetId' — ` +
+                'composer writes this column automatically from the flow\'s .assetId() field (the partition id); ' +
+                'rename the semantics column or remove it from this insightType'
+            );
+            err.code = 'INVALID_CONFIG';
+            throw err;
+        }
+
+        // Pre-compile writer steps
+        // designatedTimestamp is handled separately via sender.at()
+        // Other columns use their type-specific writers
+        const stepNames = [];
+        const stepWriters = [];
+        const stepIsNumeric = [];
+        const stepTypes = [];
+        const stepAccepts = [];
+
+        for ( let j = 0; j < persistedColumnNames.length; j += 1 ) {
+            const columnName = persistedColumnNames[ j ];
+
+            // Skip designatedTimestamp - handled separately via sender.at()
+            if ( columnName !== designatedTimestamp ) {
+                const columnSpec = columns[ columnName ];
+                const columnType = columnSpec ? columnSpec.type : 'string';
+
+                stepNames.push( columnName );
+                stepIsNumeric.push( isNumericType( columnType ) );
+                stepTypes.push( columnType );
+                stepAccepts.push( ACCEPTS[ columnType ] || acceptAny );
+
+                // float64 columns use resolution-aware writer factory
+                // Note: columnSpec is guaranteed to exist here since columnType='float64'
+                // requires columnSpec.type to be 'float64' (line 65)
+                if ( columnType === 'float64' ) {
+                    stepWriters.push( createFloat64Writer( columnSpec.resolution ) );
+                } else {
+                    stepWriters.push( QUEST_WRITERS[ columnType ] || writeAsString );
+                }
+            }
+        }
+
+        const stepCount = stepNames.length;
+        const tableName = tablePrefix + '_' + insightTypeName;
+        // Fail-fast at startup: a bad table or column name would otherwise
+        // throw inside the client mid-row at write time.
+        assertIlpNames( tableName, stepNames );
+        // Scratch array reused on every row: phase 1 records which columns passed
+        // validation, phase 2 reads it. Allocated once here, never per message.
+        const stepValueOk = new Array( stepCount );
+
+        // Once-flag for the assetId-mismatch warning below, allocated once
+        // per insightType (never per row). The mismatch is a mistake in
+        // the flow's configuration, so it would repeat on every row.
+        // One report carries all the information.
+        let assetIdMismatchWarned = false;
+
+        // Create closure that captures pre-resolved references
+        // Interface: persistRow(sender, message, partitionId) -> boolean
+        // Returns true when a row was opened and completed on the sender,
+        // false when phase 1 skipped the whole row (the sender was never
+        // touched). The caller's buffered-row accounting keys off this —
+        // a skipped row must not count as buffered.
+        // Note: partitionId is internal name, written as 'assetId' column to QuestDB
+        plansByInsightType[ insightTypeName ] = function ( sender, message, partitionId ) {
+            // ---- Phase 1: validate. No sender calls — nothing irreversible
+            // happens until every value has been checked (see file header).
+
+            // designatedTimestamp first - if invalid, skip entire row
+            const tsValue = message[ designatedTimestamp ];
+            if ( tsValue === undefined || tsValue === null ) {
+                onWarning(
+                    `designatedTimestamp '${designatedTimestamp}' is ${tsValue === null ? 'null' : 'undefined'} ` +
+                    `in insightType '${insightTypeName}' (asset: ${partitionId}) - row skipped`
+                );
+                return false;
+            }
+            // Integer-or-bigint, matching the client's own .at() validation
+            // (probe-verified: at( ...000.5, 'ms' ) throws "Designated
+            // timestamp must be an integer or BigInt" — and it throws AFTER
+            // the whole row is written, so catching it here is the only
+            // place the row survives intact).
+            if ( !Number.isInteger( tsValue ) && typeof tsValue !== 'bigint' ) {
+                onWarning(
+                    `designatedTimestamp '${designatedTimestamp}' is ${skipReason( tsValue, true, 'timestamp' )} ` +
+                    `in insightType '${insightTypeName}' (asset: ${partitionId}) - row skipped`
+                );
+                return false;
+            }
+
+            // A record field named 'assetId' never sets the assetId column.
+            // That column always stores the partition id. A record value
+            // that differs is almost always one mistake: trying to relabel
+            // identity in the record. It is reported once per insightType,
+            // never silently dropped (ADR-018 no-silent-failures). The
+            // flag advances only after onWarning returns. So under strict
+            // mode, where onWarning throws, every mismatched row is
+            // rejected here with the sender untouched.
+            if ( !assetIdMismatchWarned && message.assetId !== undefined && message.assetId !== partitionId ) {
+                onWarning(
+                    `record field 'assetId' (${message.assetId}) ignored in insightType '${insightTypeName}' ` +
+                    `(asset: ${partitionId}) — the assetId column always stores the partition id; to change ` +
+                    'stored identity, change the flow\'s .assetId() field; reported once per insightType'
+                );
+                assetIdMismatchWarned = true;
+            }
+
+            // Check every column value against its declared type. A failed
+            // check marks the column for a silent skip in phase 2 (QuestDB
+            // stores NULL) — the same treatment null already gets — and
+            // warns HERE, before the row opens, so an onWarning that throws
+            // (documented strict mode) rejects the row with the sender
+            // untouched instead of wedging it mid-row. Composer's NaN
+            // propagation ends here exactly as before: a NaN in a numeric
+            // column fails its acceptance check and lands as a NULL column
+            // while the row survives.
+            for ( let k = 0; k < stepCount; k += 1 ) {
+                const rawValue = message[ stepNames[ k ] ];
+                stepValueOk[ k ] = ( rawValue !== null ) && ( rawValue !== undefined ) && stepAccepts[ k ]( rawValue );
+                if ( !stepValueOk[ k ] ) {
+                    onWarning(
+                        `column '${stepNames[ k ]}' is ${skipReason( rawValue, stepIsNumeric[ k ], stepTypes[ k ] )} ` +
+                        `in insightType '${insightTypeName}' (asset: ${partitionId}) — column skipped`
+                    );
+                }
+            }
+
+            // ---- Phase 2: write. The row opens only after every value passed,
+            // so it is never left half-written by a rejected value.
+            sender.table( tableName );
+            sender.symbol( 'assetId', partitionId );
+
+            for ( let k = 0; k < stepCount; k += 1 ) {
+                if ( stepValueOk[ k ] ) {
+                    stepWriters[ k ]( sender, stepNames[ k ], message[ stepNames[ k ] ] );
+                }
+                // A skipped column (QuestDB stores NULL) was already warned
+                // about in phase 1 — before the row opened.
+            }
+
+            // Designated timestamp (ends the row in ILP).
+            //
+            // Async flush failure handling — the no-silent-failures contract:
+            //
+            // sender.at() is async — the buffer mutation is sync but the
+            // trailing `await this.tryFlush()` may fire a network flush.
+            // When that flush fails (HTTP timeout, buffer overflow at the
+            // client's max_buf_size, QDB unreachable), the rows in that
+            // batch are dropped. Composer must NOT silently lose data.
+            //
+            // Routing rules:
+            //   - If a caller provided `onDeliveryFailure`, route the
+            //     failure to it. The caller owns the response (log,
+            //     retry-budget, alert, stop the flow).
+            //   - Otherwise, throw a classified `DELIVERY_FAILED` error.
+            //     Inside a .catch() handler this surfaces as an
+            //     unhandled rejection — Node logs it loudly and (15+)
+            //     terminates the process. Loud failure beats silent
+            //     loss every time.
+            const atResult = sender.at( tsValue, 'ms' );
+            if ( atResult && typeof atResult.catch === 'function' ) {
+                atResult.catch( ( err ) => {
+                    if ( onDeliveryFailure ) {
+                        onDeliveryFailure( err, { tableName } );
+                        return;
+                    }
+                    const failure = new Error(
+                        `WinkComposer/questdb: silent data loss — sender.at() async flush failed for table '${tableName}': ${err.message}. ` +
+                        'Rows in this batch were dropped. Per the no-silent-failures contract this is a hard failure. ' +
+                        'Provide an `onDeliveryFailure` callback in the storage config to handle these explicitly.'
+                    );
+                    failure.code = 'DELIVERY_FAILED';
+                    failure.cause = err;
+                    throw failure;
+                } );
+            }
+
+            return true;
+        };
+    }
+
+    return plansByInsightType;
+};
+
+// ============================================================================
+// EXPORTS
+// ============================================================================
+
+export { buildPersistPlans, defaultOnWarning };

package/src/core/storage-manager/questdb/writers.js

@@ -0,0 +1,142 @@
+// core/storage-manager/questdb/writers.js
+
+/**
+ * @fileoverview QuestDB column writers mapped to semantics COLUMN_TYPES.
+ *
+ * Each writer is a function that calls the appropriate QuestDB Sender method
+ * for the given column type. These are pre-resolved at startup and stored
+ * in persist plans for allocation-minimized hot path execution.
+ *
+ * Timestamp handling:
+ * - rowTimestamp (designated): handled via sender.at() which ends the row
+ * - Additional timestamps: use QUEST_WRITERS.timestamp via sender.timestampColumn()
+ *
+ * Resolution-aware float64 quantization is delegated to the shared
+ * `core/utils/quantize` helper so QDB and the terminal emitter (and any
+ * future adapter that honours declared resolution) compute identical
+ * rounded values for the same input. Cross-sink alignment by construction.
+ *
+ * @see https://questdb.com/docs/clients/ingest-node/
+ * @see ../../utils/quantize/index.js (shared quantizer used by createFloat64Writer)
+ */
+
+import { buildResolutionQuantizer } from '../../utils/quantize/index.js';
+
+// ============================================================================
+// TYPE WRITERS
+// ============================================================================
+
+/**
+ * Type-specific column writers for QuestDB ILP.
+ * Keys match semantics COLUMN_TYPES from column-schema.js.
+ *
+ * @type {Object.<string, function(Object, string, *): void>}
+ */
+const QUEST_WRITERS = Object.create( null );
+
+/**
+ * Write float64 value.
+ *
+ * @param {Object} sender - QuestDB Sender instance
+ * @param {string} columnName - Column name
+ * @param {number} value - Float value
+ */
+QUEST_WRITERS.float64 = function ( sender, columnName, value ) {
+    sender.floatColumn( columnName, value );
+};
+
+/**
+ * Factory to create a resolution-aware float64 writer.
+ *
+ * Wraps the shared `buildResolutionQuantizer` (in `core/utils/quantize`)
+ * with QDB's sender-calling glue. The shared quantizer pre-computes the
+ * inverse resolution and decimal-place count once at factory time, so
+ * the per-message hot path is one quantize call + one `sender.floatColumn`
+ * call — no allocations, no recomputation.
+ *
+ * When the shared helper returns `null` (resolution undefined or 1),
+ * we route to the default `QUEST_WRITERS.float64` passthrough writer
+ * so callers do not pay the wrapper cost for the common case of "no
+ * quantization needed".
+ *
+ * @param {number} resolution - Resolution from semantics (e.g., 0.1, 0.01)
+ * @returns {function(Object, string, number): void} Writer function
+ */
+const createFloat64Writer = function ( resolution ) {
+    const quantize = buildResolutionQuantizer( resolution );
+    if ( !quantize ) return QUEST_WRITERS.float64;
+
+    return function ( sender, columnName, value ) {
+        sender.floatColumn( columnName, quantize( value ) );
+    };
+};
+
+/**
+ * Write int64 value.
+ *
+ * WARNING: JavaScript numbers lose precision above Number.MAX_SAFE_INTEGER (2^53 - 1).
+ * BigInt is converted to Number here, which may cause precision loss for very large values.
+ *
+ * @param {Object} sender - QuestDB Sender instance
+ * @param {string} columnName - Column name
+ * @param {number|bigint} value - Integer value
+ */
+QUEST_WRITERS.int64 = function ( sender, columnName, value ) {
+    sender.intColumn( columnName, typeof value === 'bigint' ? Number( value ) : value );
+};
+
+/**
+ * Write boolean value.
+ *
+ * @param {Object} sender - QuestDB Sender instance
+ * @param {string} columnName - Column name
+ * @param {boolean} value - Boolean value
+ */
+QUEST_WRITERS.bool = function ( sender, columnName, value ) {
+    sender.booleanColumn( columnName, value );
+};
+
+/**
+ * Write string value.
+ *
+ * @param {Object} sender - QuestDB Sender instance
+ * @param {string} columnName - Column name
+ * @param {string} value - String value
+ */
+QUEST_WRITERS.string = function ( sender, columnName, value ) {
+    sender.stringColumn( columnName, value );
+};
+
+/**
+ * Write timestamp value (for additional timestamp columns, NOT rowTimestamp).
+ * The designated rowTimestamp is handled via sender.at() which ends the row.
+ *
+ * @param {Object} sender - QuestDB Sender instance
+ * @param {string} columnName - Column name
+ * @param {number} value - Timestamp in milliseconds since epoch
+ */
+QUEST_WRITERS.timestamp = function ( sender, columnName, value ) {
+    sender.timestampColumn( columnName, value, 'ms' );
+};
+
+// ============================================================================
+// FALLBACK WRITER
+// ============================================================================
+
+/**
+ * Fallback writer that converts value to string.
+ * Used for unknown column types or when explicit string conversion is needed.
+ *
+ * @param {Object} sender - QuestDB Sender instance
+ * @param {string} columnName - Column name
+ * @param {*} value - Any value (converted to string)
+ */
+const writeAsString = function ( sender, columnName, value ) {
+    sender.stringColumn( columnName, String( value ) );
+};
+
+// ============================================================================
+// EXPORTS
+// ============================================================================
+
+export { QUEST_WRITERS, writeAsString, createFloat64Writer };