@windypro-rourou/dsh-eda 0.1.3 → 0.1.5

package/skill/user-guide/using-extension.md

@@ -1,47 +1,47 @@
-# Getting and Using Extensions
-
-## Getting Extensions
-
-EasyEDA Pro now provides the official [Extensions Marketplace](https://jlcext.com), where you can conveniently obtain a wide range of EasyEDA Pro extensions provided by both official and third-party developers.
-
-![](/storage/images/cn/api/guide/how-to-install/how-to-install_20250427_164224.jpg)
-
-## Installing Extensions
-
-### V3 Installation
-
-1. Open the [EasyEDA Pro Editor](https://pro.easyeda.com/editor).
-
-2. In the top menu, click **Advanced** -\> **Extension Manager**:
-
-![图 0](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150319.png)
-
-3. While online, you can search for extensions and install them directly. If you already have an extension file, you can also click **Import** to import it:
-
-![图 1](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150359.png)
-
-4. Switch to the **Installed** list and click an installed extension to configure its enabled state and permissions. If **Show in top menu** is not checked, the extension entry will appear under the **Advanced** menu by default:
-
-![图 2](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150451.png)
-
-### V2 Installation
-
-1. Open the [EasyEDA Pro Editor](https://pro.easyeda.com/editor).
-
-2. In the top menu bar, click **Settings** -\> **Extensions** -\> **Extension Manager...** in sequence:
-
-  ![图 3](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150634.png)
-
-3. In the pop-up window, click **Import Extension**, then select the downloaded `.eext` file to complete the import.
-
-  ![图 4](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150706.png)
-
-4. Extension settings
-
-- Installed extensions can be enabled or disabled. The registered menu of an enabled extension will be displayed in the top menu bar:
-
-  ![图 5](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150731.png)
-
-- Some extensions involve external interactions, such as network access. You need to enable the extension's **External Interactions** permission to ensure proper operation:
-
-  ![图 6](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150746.png)
+# Getting and Using Extensions
+
+## Getting Extensions
+
+EasyEDA Pro now provides the official [Extensions Marketplace](https://jlcext.com), where you can conveniently obtain a wide range of EasyEDA Pro extensions provided by both official and third-party developers.
+
+![](/storage/images/cn/api/guide/how-to-install/how-to-install_20250427_164224.jpg)
+
+## Installing Extensions
+
+### V3 Installation
+
+1. Open the [EasyEDA Pro Editor](https://pro.easyeda.com/editor).
+
+2. In the top menu, click **Advanced** -\> **Extension Manager**:
+
+![图 0](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150319.png)
+
+3. While online, you can search for extensions and install them directly. If you already have an extension file, you can also click **Import** to import it:
+
+![图 1](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150359.png)
+
+4. Switch to the **Installed** list and click an installed extension to configure its enabled state and permissions. If **Show in top menu** is not checked, the extension entry will appear under the **Advanced** menu by default:
+
+![图 2](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150451.png)
+
+### V2 Installation
+
+1. Open the [EasyEDA Pro Editor](https://pro.easyeda.com/editor).
+
+2. In the top menu bar, click **Settings** -\> **Extensions** -\> **Extension Manager...** in sequence:
+
+  ![图 3](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150634.png)
+
+3. In the pop-up window, click **Import Extension**, then select the downloaded `.eext` file to complete the import.
+
+  ![图 4](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150706.png)
+
+4. Extension settings
+
+- Installed extensions can be enabled or disabled. The registered menu of an enabled extension will be displayed in the top menu bar:
+
+  ![图 5](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150731.png)
+
+- Some extensions involve external interactions, such as network access. You need to enable the extension's **External Interactions** permission to ensure proper operation:
+
+  ![图 6](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150746.png)

package/src/json-gen.test.js

@@ -0,0 +1,430 @@
+// ============================================================================
+// dsh-lichuang-eda · 自动化测试（Node 内置 node:test，零依赖）
+// 运行：node --test src/json-gen.test.js
+//   ⚠ Windows 沙箱（DSH）下 node:test 默认的子进程隔离会被沙箱拦截（spawn EPERM），
+//     请用：node --test --experimental-test-isolation=none src/json-gen.test.js
+//     普通环境（无沙箱）直接用 node --test 即可。
+//
+// 覆盖两层：
+//   层一（json-gen.js，生成器自带的校验）：
+//     validateSchematic(obj)   —— 结构 lint（顶层/head/canvas/shape/BBox/colors）
+//     deriveNetlist(sheet)     —— 从生成物反推网表 + 一致性自检
+//   层二（validate.js，design 级校验，供 nl-to-design 与插件调用）：
+//     checkConnectivity / deriveNetlist / pinPoints
+//
+// 用例：
+//   合法电路（电阻+LED）→ JSON.parse + 必需字段 + 结构 lint + 网表自检 全通过
+//   坏电路（悬空导线 / 引脚未闭合 / 孤立导线）→ 网表自检必须报错
+//   残缺对象 → 结构 lint 必须报错
+// ============================================================================
+
+import { test } from 'node:test'
+import assert from 'node:assert/strict'
+
+// ---- 层一：生成器（json-gen.js）----
+import {
+  generateSchematic,
+  wrapAsProject,
+  validateSchematic,
+  deriveNetlist as deriveNetlistFromSheet,
+  DEFAULT_DESIGN,
+} from './json-gen.js'
+
+// ---- 层二：design 级校验（validate.js）----
+import {
+  validateSchematic as lintDesign,
+  checkConnectivity,
+  deriveNetlist as deriveNetlistFromDesign,
+  pinPoints,
+} from './validate.js'
+
+// ---- nl-to-design 模板目录（供模板卡/关键词路由测试）----
+import { templateById, translateRequest, TEMPLATE_CATALOG } from './nl-to-design.js'
+
+const pinsOf = (pins) => pins.map((p) => `${p.designator}.${p.number}`).sort()
+const sheetPinsOf = (pins) => pins.map((p) => `${p.designator}.${p.number}`).sort()
+
+// ============================================================================
+// 合法电路：生成 → JSON.parse → 必需字段 → 结构 lint → 网表自检 全通过
+// ============================================================================
+
+test('生成 → JSON.parse 往返，顶层键/head 键符合文档确认的结构', () => {
+  const sheet = generateSchematic(DEFAULT_DESIGN)
+  const round = JSON.parse(JSON.stringify(sheet))
+  // 平面单片顶层键与真实 v6 导出一致（docs/json-format.md §2.1）
+  assert.deepEqual(Object.keys(round).sort(), ['BBox', 'canvas', 'colors', 'head', 'shape'])
+  // head 键与真实 v6 样本一致（§3）
+  assert.deepEqual(Object.keys(round.head).sort(), [
+    'c_para', 'c_spiceCmd', 'docType', 'editorVersion', 'hasIdFlag', 'importFlag',
+    'newgId', 'portOfADImportHack', 'transformList', 'uuid', 'x', 'y',
+  ])
+  // canvas 15 段（§4）
+  assert.equal(round.canvas.split('~').length, 15)
+  // shape 前缀分布：2 元件 + 1 导线 + 1 网络标签 + 1 接地标志
+  const prefixes = {}
+  for (const s of round.shape) prefixes[s.split('~')[0]] = (prefixes[s.split('~')[0]] ?? 0) + 1
+  assert.deepEqual(prefixes, { LIB: 2, W: 1, N: 1, F: 1 })
+})
+
+test('validateSchematic（json-gen.js 导出）：合法产物结构 lint 通过', () => {
+  const sheet = generateSchematic(DEFAULT_DESIGN)
+  const res = validateSchematic(sheet)
+  assert.equal(res.ok, true, res.errors.join('; '))
+  // 工程包装的 dataStr 同样可 lint
+  const proj = wrapAsProject(sheet, { title: 'demo' })
+  assert.equal(proj.docType, 5)
+  assert.equal(proj.schematics.length, 1)
+  assert.equal(validateSchematic(proj.schematics[0].dataStr).ok, true)
+})
+
+test('deriveNetlist（sheet 级）：3 个网络全部闭合，4 个引脚各归其网', () => {
+  const sheet = generateSchematic(DEFAULT_DESIGN)
+  const nl = deriveNetlistFromSheet(sheet)
+  assert.equal(nl.checks.ok, true, '网表自检应通过: ' + nl.checks.errors.join('; '))
+  assert.equal(nl.nets.length, 3, '应有 3 个网络（Net1 / 5V / GND）')
+  const byName = Object.fromEntries(nl.nets.map((n) => [n.name, n]))
+  assert.ok(byName['5V'], '应包含 5V 网络（标签）')
+  assert.ok(byName['GND'], '应包含 GND 网络（接地标志）')
+  assert.deepEqual(sheetPinsOf(byName['5V'].pins), ['R1.2'], '5V = R1 引脚2（带标签允许单引脚）')
+  assert.deepEqual(sheetPinsOf(byName['GND'].pins), ['LED1.2'], 'GND = LED1 引脚2')
+  const main = Object.values(byName).find((n) => n.label === null)
+  assert.ok(main, '应存在无标签内部网络')
+  assert.deepEqual(sheetPinsOf(main.pins), ['LED1.1', 'R1.1'], '内部网络 = R1 引脚1 + LED1 引脚1')
+  for (const n of nl.nets) assert.equal(n.closed, true, `${n.name} 应闭合`)
+  // 4 个引脚恰好各出现一次
+  const all = nl.nets.flatMap((n) => n.pins)
+  assert.equal(all.length, 4)
+  assert.equal(new Set(all.map((p) => `${p.designator}.${p.number}`)).size, 4, '引脚不应重复归属')
+})
+
+test('checkConnectivity（design 级）：连通、无悬空；命名网含 5V/GND', () => {
+  const res = checkConnectivity(DEFAULT_DESIGN)
+  assert.equal(res.ok, true, res.errors.join('; '))
+  const named = res.netlist.nets.filter((n) => n.name !== null)
+  assert.deepEqual(named.map((n) => n.name).sort(), ['5V', 'GND'])
+  for (const n of named) assert.ok(n.pins.length >= 1, `net ${n.name} 无引脚`)
+  assert.equal(res.netlist.dangling.length, 0)
+})
+
+test('deriveNetlist（design 级）：5V/GND 与中间网络引脚符合预期', () => {
+  const { nets } = deriveNetlistFromDesign(DEFAULT_DESIGN)
+  const byName = Object.fromEntries(
+    nets.filter((n) => n.name !== null).map((n) => [n.name, n.pins.map((p) => p.ref + '.' + p.pin)]),
+  )
+  assert.deepEqual(byName['5V'].sort(), ['R1.2'])
+  assert.deepEqual(byName['GND'].sort(), ['LED1.2'])
+  const unnamed = nets.filter((n) => n.name === null && n.pins.length === 2)
+  assert.equal(unnamed.length, 1)
+  assert.deepEqual(unnamed[0].pins.map((p) => p.ref + '.' + p.pin).sort(), ['LED1.1', 'R1.1'])
+})
+
+test('pinPoints：resistor/led 引脚几何与生成器一致（±50/±40）', () => {
+  const r = pinPoints({ ref: 'R1', type: 'resistor', pos: { x: 400, y: 300 } })
+  assert.deepEqual(r.map((p) => [p.x, p.y]), [[450, 300], [350, 300]])
+  const l = pinPoints({ ref: 'D1', type: 'led', pos: { x: 700, y: 300 } })
+  assert.deepEqual(l.map((p) => [p.x, p.y]), [[740, 300], [660, 300]])
+})
+
+test('pinPoints：capacitor/diode/switch 引脚几何与生成器一致', () => {
+  // capacitor/switch: ±50；diode: ±40（阳极右/阴极左）
+  assert.deepEqual(pinPoints({ ref: 'C1', type: 'capacitor', pos: { x: 400, y: 300 } }).map((p) => [p.x, p.y]),
+    [[450, 300], [350, 300]])
+  assert.deepEqual(pinPoints({ ref: 'S1', type: 'switch', pos: { x: 400, y: 300 } }).map((p) => [p.x, p.y]),
+    [[450, 300], [350, 300]])
+  assert.deepEqual(pinPoints({ ref: 'D1', type: 'diode', pos: { x: 700, y: 300 } }).map((p) => [p.x, p.y]),
+    [[740, 300], [660, 300]])
+})
+
+test('capacitor 去耦：VCC→C→GND 生成 + 结构 lint + 连通性 + 网表自检 全通过', () => {
+  const cap = {
+    name: 'cap-bypass',
+    components: [{ ref: 'C1', type: 'capacitor', value: '0.1u', pos: { x: 400, y: 300 } }],
+    wires: [],
+    nets: [{ name: '5V', points: [[450, 300]] }, { name: 'GND', points: [[350, 300]] }],
+  }
+  const sheet = generateSchematic(cap)
+  assert.equal(validateSchematic(sheet).ok, true, validateSchematic(sheet).errors.join('; '))
+  assert.equal(checkConnectivity(cap).ok, true, checkConnectivity(cap).errors.join('; '))
+  const nl = deriveNetlistFromSheet(sheet)
+  assert.equal(nl.checks.ok, true, nl.checks.errors.join('; '))
+  const byName = Object.fromEntries(nl.nets.map((n) => [n.name, n]))
+  assert.ok(byName['5V'] && byName['GND'], '应含 5V/GND 命名网')
+})
+
+test('新符号：capacitor/diode/switch 混合设计 generateSchematic 不抛错且结构 lint 通过', () => {
+  const mix = {
+    name: 'mix',
+    components: [
+      { ref: 'R1', type: 'resistor', value: '1k', pos: { x: 200, y: 300 } },
+      { ref: 'C1', type: 'capacitor', value: '0.1u', pos: { x: 400, y: 460 } },
+      { ref: 'D1', type: 'diode', value: '1N4007', pos: { x: 600, y: 300 } },
+      { ref: 'S1', type: 'switch', value: 'SW', pos: { x: 850, y: 300 } },
+    ],
+    wires: [],
+    nets: [{ name: '5V', points: [[150, 300]] }, { name: 'GND', points: [[900, 300]] }],
+  }
+  const sheet = generateSchematic(mix)
+  assert.equal(validateSchematic(sheet).ok, true, validateSchematic(sheet).errors.join('; '))
+  const prefixes = {}
+  for (const s of sheet.shape) prefixes[s.split('~')[0]] = (prefixes[s.split('~')[0]] ?? 0) + 1
+  assert.equal(prefixes.LIB, 4, '应有 4 个元件 LIB')
+})
+
+test('wrapAsProject：docType=5 工程包装，dataStr 与平面单片一致', () => {
+  const sheet = generateSchematic(DEFAULT_DESIGN)
+  const proj = wrapAsProject(sheet, { title: 'demo' })
+  assert.equal(proj.docType, 5)
+  assert.deepEqual(Object.keys(proj).sort(), ['colors', 'description', 'docType', 'editorVersion', 'schematics', 'title'])
+  assert.equal(proj.schematics.length, 1)
+  assert.equal(proj.schematics[0].docType, '1')
+  assert.deepEqual(proj.schematics[0].dataStr, sheet)
+})
+
+// ============================================================================
+// 坏电路：网表自检必须报错（结构 lint 仍通过 —— 格式合法、电路断开）
+// ============================================================================
+
+test('坏电路：悬空导线端点 → sheet 级网表自检报错', () => {
+  const sheet = generateSchematic({
+    components: [{ ref: 'R1', type: 'resistor', value: '10k', pos: { x: 400, y: 300 } }],
+    // 起点 (450,300) 接 R1 引脚1；末端 (900,480) 悬空
+    wires: [[450, 300, 450, 380, 900, 380, 900, 480]],
+    nets: [{ name: '5V', points: [[350, 300]] }],
+  })
+  // 结构 lint 通过（悬空导线是电路问题，不是格式问题）
+  assert.equal(validateSchematic(sheet).ok, true)
+  // 网表自检必须失败
+  const nl = deriveNetlistFromSheet(sheet)
+  assert.equal(nl.checks.ok, false, '网表自检必须失败')
+  const msgs = nl.checks.errors.join('; ')
+  assert.ok(msgs.includes('悬空导线端点'), '应报悬空导线端点: ' + msgs)
+  assert.ok(msgs.includes('未闭合'), '同时应报网络未闭合（只有 1 个引脚）: ' + msgs)
+})
+
+test('坏电路：引脚未连接（网络未闭合）→ sheet 级网表自检报错', () => {
+  const sheet = generateSchematic({
+    components: [
+      { ref: 'R1', type: 'resistor', value: '10k', pos: { x: 400, y: 300 } },
+      { ref: 'LED1', type: 'led', value: 'red', pos: { x: 700, y: 300 } },
+    ],
+    wires: [[450, 300, 740, 300]], // R1.1 ↔ LED1.1 已连
+    nets: [{ name: '5V', points: [[350, 300]] }], // 缺 GND → LED1 阴极 (660,300) 悬空
+  })
+  const nl = deriveNetlistFromSheet(sheet)
+  assert.equal(nl.checks.ok, false)
+  const msgs = nl.checks.errors.join('; ')
+  assert.ok(msgs.includes('未闭合'), '应报未闭合网络: ' + msgs)
+  assert.ok(msgs.includes('LED1'), '错误信息应指明 LED1 引脚: ' + msgs)
+})
+
+test('坏电路：完全孤立的导线 → sheet 级网表自检报孤立导线', () => {
+  const sheet = generateSchematic({ components: [], wires: [[100, 100, 200, 200]], nets: [] })
+  const nl = deriveNetlistFromSheet(sheet)
+  assert.equal(nl.checks.ok, false)
+  const msgs = nl.checks.errors.join('; ')
+  assert.ok(msgs.includes('孤立导线'), '应报孤立导线: ' + msgs)
+})
+
+test('坏电路（design 级）：引脚悬空 → checkConnectivity 报错；生成器照常产出', () => {
+  const broken = {
+    name: 'broken',
+    components: [{ ref: 'R9', type: 'resistor', value: '1k', pos: { x: 100, y: 100 } }],
+    wires: [],
+    nets: [],
+  }
+  const sheet = generateSchematic(broken) // 生成不报错（生成器只负责生成）
+  assert.equal(validateSchematic(sheet).ok, true)
+  const res = checkConnectivity(broken) // 但连通性必须报错
+  assert.equal(res.ok, false)
+  assert.ok(res.errors.some((e) => e.includes('R9.1')), '应报出 R9.1 悬空: ' + res.errors.join('; '))
+  assert.ok(res.errors.some((e) => e.includes('R9.2')), '应报出 R9.2 悬空: ' + res.errors.join('; '))
+})
+
+// ============================================================================
+// 结构 lint 防御：残缺/非法对象必须报错
+// ============================================================================
+
+test('validateSchematic：残缺/非法对象必须报错', () => {
+  const bad1 = validateSchematic({ head: {}, canvas: 42, shape: 'x', BBox: {}, colors: null, extra: 1 })
+  assert.equal(bad1.ok, false)
+  assert.ok(bad1.errors.length >= 4, '应有多条错误: ' + bad1.errors.join('; '))
+  assert.ok(bad1.errors.some((e) => e.includes('顶层键')), bad1.errors.join('; '))
+  assert.ok(bad1.errors.some((e) => e.includes('canvas')))
+
+  assert.equal(validateSchematic(null).ok, false)
+  assert.equal(validateSchematic([]).ok, false)
+
+  // 缺 head 必需字段 + 空 shape
+  const bad2 = validateSchematic({
+    head: { docType: '1' },
+    canvas: 'CA~1200~800~#FFFFFF~yes~#CCCCCC~10~1200~800~line~10~pixel~5~0~0',
+    shape: [],
+    BBox: { x: 0, y: 0, width: 10, height: 10 },
+    colors: {},
+  })
+  assert.equal(bad2.ok, false)
+  assert.ok(bad2.errors.some((e) => e.includes('head 缺少必需字段')))
+  assert.ok(bad2.errors.some((e) => e.includes('shape 不能为空')))
+
+  // validate.js 的 validateSchematic 同样拒绝
+  assert.equal(lintDesign({ head: {}, shape: [] }).ok, false)
+})
+
+// ============================================================================
+// 其他
+// ============================================================================
+
+test('不支持的元件类型：generateSchematic 抛出明确错误', () => {
+  assert.throws(
+    () =>
+      generateSchematic({
+        ...DEFAULT_DESIGN,
+        components: [{ ref: 'X1', type: 'ic', value: 'X', pos: { x: 0, y: 0 } }],
+      }),
+    /不支持的元件类型/,
+  )
+})
+
+test('new-symbol templates: cap-bypass/diode-protect/switch-demo 生成 ok 且设计闭合', () => {
+  const supported = TEMPLATE_CATALOG.filter((t) => t.supported === true)
+  assert.ok(supported.length >= 5, '应有 ≥5 个支持模板: ' + supported.map((t) => t.id).join(', '))
+  for (const id of ['cap-bypass', 'diode-protect', 'switch-demo']) {
+    const r = templateById(id)
+    assert.equal(r.ok, true, `${id} 应生成成功: ${r.note || ''}`)
+    assert.ok(r.design, `${id} 应有 design`)
+    const res = checkConnectivity(r.design)
+    assert.equal(res.ok, true, `${id} 连通性应通过: ${res.errors.join('; ')}`)
+  }
+  // 关键词路由
+  assert.ok(translateRequest('帮我加一个电源去耦电容').ok, '电容关键词应路由到模板')
+  assert.ok(translateRequest('一个二极管防反接电路').ok, '二极管关键词应路由')
+  assert.ok(translateRequest('开关电路').ok, '开关关键词应路由')
+})
+
+test('demo-netlist.json 与 demo.json 联动：生成器 main 产物可复现（幂等形状）', async () => {
+  // 重新运行 main()，确认 demo.json / demo-project.json / demo-netlist.json 均能写出且自检通过
+  const { ok, netlist } = await (await import('./json-gen.js')).main()
+  assert.equal(ok, true)
+  assert.equal(netlist.checks.ok, true, netlist.checks.errors.join('; '))
+  assert.equal(netlist.nets.length, 3)
+})
+
+// ============================================================================
+// 任务 4 新增：4 种新符号 + 3 个新模板 + pinPoints 全类型
+// ============================================================================
+
+test('新符号：inductor/crystal/battery/fuse 生成 + 结构 lint 通过（各 1 个 LIB）', () => {
+  const cases = [
+    ['L1', 'inductor', '10u'],
+    ['Y1', 'crystal', '16MHz'],
+    ['BT1', 'battery', '3.7V'],
+    ['F1', 'fuse', '1A'],
+  ]
+  for (const [ref, type, value] of cases) {
+    const sheet = generateSchematic({ components: [{ ref, type, value, pos: { x: 400, y: 300 } }], nets: [] })
+    const lint = validateSchematic(sheet)
+    assert.equal(lint.ok, true, `${type} 结构 lint 应通过: ${lint.errors.join('; ')}`)
+    const libs = sheet.shape.filter((s) => s.startsWith('LIB'))
+    assert.equal(libs.length, 1, `${type} 应恰有 1 个 LIB`)
+    assert.ok(libs[0].includes('spiceSymbolName'), `${type} LIB 应包含 spiceSymbolName`)
+  }
+})
+
+test('pinPoints：新 6 类 → ±50；diode → ±40（与 led 同档）', () => {
+  // 两脚间距 100（±50）：电容/开关/电感/晶振/电池/保险丝（引脚1 右、引脚2 左）
+  for (const type of ['capacitor', 'switch', 'inductor', 'crystal', 'battery', 'fuse']) {
+    assert.deepEqual(
+      pinPoints({ ref: 'X1', type, pos: { x: 400, y: 300 } }).map((p) => [p.x, p.y]),
+      [[450, 300], [350, 300]],
+      `${type} 应为 ±50`,
+    )
+  }
+  // 两脚间距 80（±40）：二极管与 LED 同档（阳极右=引脚1，阴极左=引脚2）
+  assert.deepEqual(pinPoints({ ref: 'D1', type: 'diode', pos: { x: 700, y: 300 } }).map((p) => [p.x, p.y]),
+    [[740, 300], [660, 300]])
+  assert.deepEqual(pinPoints({ ref: 'L1', type: 'led', pos: { x: 700, y: 300 } }).map((p) => [p.x, p.y]),
+    [[740, 300], [660, 300]])
+})
+
+test('rc-delay 组合电路：translateRequest → 生成 + 结构 lint + 连通 + 网表自检 全通过', () => {
+  const rd = translateRequest('一个 RC 延时电路')
+  assert.equal(rd.ok, true, rd.note || '')
+  assert.equal(rd.title, 'RC 延时电路')
+  const types = rd.design.components.map((c) => c.type)
+  assert.ok(types.includes('resistor') && types.includes('capacitor'), `应含 resistor/capacitor: ${types.join(', ')}`)
+  const sheet = generateSchematic(rd.design)
+  assert.equal(validateSchematic(sheet).ok, true, validateSchematic(sheet).errors.join('; '))
+  assert.equal(checkConnectivity(rd.design).ok, true, checkConnectivity(rd.design).errors.join('; '))
+  const nl = deriveNetlistFromSheet(sheet)
+  assert.equal(nl.checks.ok, true, nl.checks.errors.join('; '))
+  const byName = Object.fromEntries(nl.nets.map((n) => [n.name, n]))
+  assert.ok(byName['5V'] && byName['GND'], 'rc-delay 应含 5V/GND 命名网')
+})
+
+test('diode-protect 组合电路：生成 + 结构 lint + 连通 + 网表自检 全通过', () => {
+  const dp = translateRequest('用二极管保护一下')
+  assert.equal(dp.ok, true, dp.note || '')
+  assert.ok(dp.design.components.some((c) => c.type === 'diode'), '应含二极管')
+  const sheet = generateSchematic(dp.design)
+  assert.equal(validateSchematic(sheet).ok, true, validateSchematic(sheet).errors.join('; '))
+  assert.equal(checkConnectivity(dp.design).ok, true, checkConnectivity(dp.design).errors.join('; '))
+  const nl = deriveNetlistFromSheet(sheet)
+  assert.equal(nl.checks.ok, true, nl.checks.errors.join('; '))
+})
+
+test('battery-switch-led 组合电路：生成 + 结构 lint + 连通 + 网表自检 全通过', () => {
+  const bsl = templateById('battery-switch-led')
+  assert.equal(bsl.ok, true, bsl.note || '')
+  const types = bsl.design.components.map((c) => c.type)
+  assert.ok(types.includes('battery') && types.includes('switch') && types.includes('led'),
+    `应含 battery/switch/led: ${types.join(', ')}`)
+  const sheet = generateSchematic(bsl.design)
+  assert.equal(validateSchematic(sheet).ok, true, validateSchematic(sheet).errors.join('; '))
+  assert.equal(checkConnectivity(bsl.design).ok, true, checkConnectivity(bsl.design).errors.join('; '))
+  const nl = deriveNetlistFromSheet(sheet)
+  assert.equal(nl.checks.ok, true, nl.checks.errors.join('; '))
+})
+
+test('nl-to-design：rc-delay / diode-protect / battery-switch-led 关键词命中且模板目录已登记', () => {
+  // 模板目录登记：3 条新模板均 supported:true
+  for (const id of ['rc-delay', 'diode-protect', 'battery-switch-led']) {
+    const meta = TEMPLATE_CATALOG.find((t) => t.id === id)
+    assert.ok(meta, `TEMPLATE_CATALOG 应包含 ${id}`)
+    assert.equal(meta.supported, true, `${id} 应为 supported:true`)
+  }
+  // 关键词路由
+  const rc = translateRequest('一个 RC 延时电路')
+  assert.equal(rc.ok, true)
+  assert.ok(rc.design.components.some((c) => c.type === 'capacitor'), 'rc-delay 应含 capacitor')
+
+  const dp = translateRequest('用二极管保护一下')
+  assert.equal(dp.ok, true)
+  assert.ok(dp.design.components.some((c) => c.type === 'diode'), 'diode-protect 应含 diode')
+
+  const bsl = translateRequest('电池开关灯')
+  assert.equal(bsl.ok, true)
+  const t = bsl.design.components.map((c) => c.type)
+  assert.ok(t.includes('switch') && t.includes('battery'), `电池开关灯应含 switch/battery: ${t.join(', ')}`)
+})
+
+test('9 种符号混合 generateSchematic 结构 lint 通过（含新 4 种）', () => {
+  const mix = {
+    components: [
+      { ref: 'R1', type: 'resistor', value: '1k', pos: { x: 200, y: 300 } },
+      { ref: 'L1', type: 'inductor', value: '10u', pos: { x: 400, y: 300 } },
+      { ref: 'C1', type: 'capacitor', value: '0.1u', pos: { x: 600, y: 300 } },
+      { ref: 'D1', type: 'diode', value: '1N4007', pos: { x: 800, y: 300 } },
+      { ref: 'Y1', type: 'crystal', value: '16MHz', pos: { x: 1000, y: 300 } },
+      { ref: 'BT1', type: 'battery', value: '3.7V', pos: { x: 1200, y: 300 } },
+      { ref: 'F1', type: 'fuse', value: '1A', pos: { x: 1400, y: 300 } },
+      { ref: 'S1', type: 'switch', value: 'SW', pos: { x: 1600, y: 300 } },
+      { ref: 'LED1', type: 'led', value: 'red', pos: { x: 1800, y: 300 } },
+    ],
+    wires: [],
+    nets: [],
+  }
+  const sheet = generateSchematic(mix)
+  assert.equal(validateSchematic(sheet).ok, true, validateSchematic(sheet).errors.join('; '))
+  const libs = sheet.shape.filter((s) => s.startsWith('LIB'))
+  assert.equal(libs.length, 9, '应有 9 个元件 LIB')
+})

package/skill/guide/ancillary-projects/pro-api-sdk.md

@@ -1 +0,0 @@
-<!--@include: @/private/pro-api-sdk/README.en.md{3,}-->

package/skill/references/interfaces/ISYS_PcbComparisonResponse.md

@@ -1,115 +0,0 @@
-# ISYS\_PcbComparisonResponse interface
-
-PCB comparison response
-
-## Signature
-
-```typescript
-interface ISYS_PcbComparisonResponse
-```
-
-## Properties
-
-<table><thead><tr><th>
-
-Property
-
-</th><th>
-
-Modifiers
-
-</th><th>
-
-Type
-
-</th><th>
-
-Description
-
-</th></tr></thead>
-<tbody><tr><td>
-
-[data?](./ISYS_PcbComparisonResponse.md)
-
-</td><td>
-
-</td><td>
-
-any
-
-</td><td>
-
-_(Optional)_ Comparison result (present when `success = true`<!-- -->)
-
-</td></tr>
-<tr><td>
-
-[error?](./ISYS_PcbComparisonResponse.md)
-
-</td><td>
-
-</td><td>
-
-{ code: [TSYS\_PcbComparisonErrorCode](../types/TSYS_PcbComparisonErrorCode.md)<!-- -->; message: string }
-
-</td><td>
-
-_(Optional)_ Error (present when `success = false`<!-- -->)
-
-</td></tr>
-<tr><td>
-
-[success](./ISYS_PcbComparisonResponse.md)
-
-</td><td>
-
-</td><td>
-
-boolean
-
-</td><td>
-
-Whether Successful
-
-</td></tr>
-</tbody></table>
-
----
-
-## 属性详情
-
-### data
-
-# ISYS\_PcbComparisonResponse.data property
-
-Comparison result (present when `success = true`<!-- -->)
-
-## Signature
-
-```typescript
-data?: any;
-```
-
-### error
-
-# ISYS\_PcbComparisonResponse.error property
-
-Error (present when `success = false`<!-- -->)
-
-## Signature
-
-```typescript
-error?: { code: TSYS_PcbComparisonErrorCode; message: string };
-```
-
-### success
-
-# ISYS\_PcbComparisonResponse.success property
-
-Whether Successful
-
-## Signature
-
-```typescript
-success: boolean;
-```

package/skill/references/types/ISYS_LanguageKeyValuePairs.md

@@ -1,13 +0,0 @@
-# ISYS\_LanguageKeyValuePairs type
-
-Language data key value for
-
-## Signature
-
-```typescript
-type ISYS_LanguageKeyValuePairs = Record<string, string>;
-```
-
-## Remarks
-
-Data of a single language

package/skill/references/types/TSYS_PcbComparisonErrorCode.md

@@ -1,10 +0,0 @@
-# TSYS\_PcbComparisonErrorCode type
-
-PCB comparison failure error code
-
-## Signature
-
-```typescript
-type TSYS_PcbComparisonErrorCode
-	= 'INVALID_PARAM' | 'SAME_PCB' | 'PCB_NOT_FOUND' | 'COMPARISON_FAILED';
-```